Results for “Marine Geophysical Research” — Page 5

USGS2012

The Beaufort Sea continental shelf as a seasonal source of atmospheric methane

Methane concentrations in the Beaufort Sea under the winter ice canopy offshore from northern Alaska are 3 to 28 times greater than they are in late summer when the ice is absent in a similar region offshore from northern Canada where methane is in approximate equilibrium with the atmosphere. These observations suggest that methane concentrates in the water under the sea‐ice cover during winter and ventilates rapidly in late summer as the ice melts and retreats. Conditions similar to those on the Beaufort Sea shelf likely exist on the much larger Siberian shelf, making the Arctic Ocean margin a possible seasonal, high‐latitude, marine source of about 0.1 Tg yr −1 atmospheric methane. The small addition of methane likely contributes to the late‐summer increase in atmospheric methane that is observed each year particularly in the northern hemisphere.

Alaska↗

USGS1998

Nonlinear refraction and reflection travel time tomography

We develop a rapid nonlinear travel time tomography method that simultaneously inverts refraction and reflection travel times on a regular velocity grid. For travel time and ray path calculations, we apply a wave front method employing graph theory. The first-arrival refraction travel times are calculated on the basis of cell velocities, and the later refraction and reflection travel times are computed using both cell velocities and given interfaces. We solve a regularized nonlinear inverse problem. A Laplacian operator is applied to regularize the model parameters (cell slownesses and reflector geometry) so that the inverse problem is valid for a continuum. The travel times are also regularized such that we invert travel time curves rather than travel time points. A conjugate gradient method is applied to minimize the nonlinear objective function. After obtaining a solution, we perform nonlinear Monte Carlo inversions for uncertainty analysis and compute the posterior model covariance. In numerical experiments, we demonstrate that combining the first arrival refraction travel times with later reflection travel times can better reconstruct the velocity field as well as the reflector geometry. This combination is particularly important for modeling crustal structures where large velocity variations occur in the upper crust. We apply this approach to model the crustal structure of the California Borderland using ocean bottom seismometer and land data collected during the Los Angeles Region Seismic Experiment along two marine survey lines. Details of our image include a high-velocity zone under the Catalina Ridge, but a smooth gradient zone between. Catalina Ridge and San Clemente Ridge. The Moho depth is about 22 km with lateral variations. Copyright 1998 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

USGS1997

High-resolution seismic reflection profiling of the Santa Monica Fault Zone, West Los Angeles, California

High-resolution seismic reflection data obtained across the Santa Monica fault in west Los Angeles reveal the near-surface geometry of this active, oblique-reverse-left-lateral fault. Although near-surface fault dips as great as 55° cannot be ruled out, we interpret the fault to dip northward at 30° to 35° in the upper few hundred meters, steepening to ≥65° at 1 to 2 km depth. A total of ∼180 m of near-field thrust separation (fault slip plus drag folding) has occurred on the fault since the development of a prominent erosional surface atop ∼1.2 Ma strata. In the upper 20 to 40 m strain is partitioned between the north-dipping main thrust strand and several closely spaced, near-vertical strike-slip faults observed in paleoseismologic trenches. The main thrust strand can be traced to within 20 m of the ground surface, suggesting that it breaks through to the surface in large earthquakes. Uplift of a ∼50,000-year-old alluvial fan surface indicates a short-term, dip-slip rate of ∼0.5 mm/yr, similar to the ∼0.6 mm/yr dip-slip rate derived from vertical separation of the oxygen isotope stage 5e marine terrace 3 km west of the study site. If the 0.6 mm/yr minimum, dip-slip-only rate characterizes the entire history of the fault, then the currently active strand of the Santa Monica fault probably began moving within the past ∼300,000 years.

Geophysical Research Letters↗

USGS2018

Ground penetrating radar and differential global positioning system data collected in April 2016 from Fire Island, New York

Researchers from the U.S. Geological Survey (USGS) conducted a long-term coastal morphologic-change study at Fire Island, New York, prior to and after Hurricane Sandy impacted the area in October 2012. The Fire Island Coastal Change project objectives include understanding the morphologic evolution of the barrier island system on a variety of time scales (months to centuries) and resolving storm-related impacts, post-storm beach response, and recovery. In April 2016, scientists from the USGS St. Petersburg Coastal and Marine Science Center conducted geophysical and sediment sampling surveys on Fire Island to characterize and quantify spatial variability in the subaerial geology with the goal of subsequently integrating onshore geology with other surf zone and nearshore datasets. This report, along with the associated USGS data release , serves as an archive of ground penetrating radar (GPR) and post-processed differential global positioning system (DGPS) data collected from beach and back-barrier environments on Fire Island, April 6–13, 2016 (USGS Field Activity Number 2016-322-FA). Data products, including unprocessed GPR trace data, processed DGPS data, elevation-corrected subsurface profile images, geographic information system files, and accompanying Federal Geographic Data Committee metadata are available for download.

New York↗

USGS2018

Sediment data from vibracores collected in 2016 from Fire Island, New York

Researchers from the U.S. Geological Survey (USGS) conducted a long-term coastal morphologic-change study at Fire Island, New York, prior to and after Hurricane Sandy impacted the area in October 2012. The Fire Island Coastal Change project objectives include understanding the morphologic evolution of the barrier island system on a variety of time scales (months to centuries) and resolving storm-related effects, post-storm beach response, and recovery. In April 2016, scientists from the USGS St. Petersburg Coastal and Marine Science Center conducted sediment sampling and geophysical surveys on Fire Island to characterize and quantify spatial variability in the subaerial geology with the goal of subsequently integrating onshore geology with other surf zone and nearshore datasets. This report, along with the accompanying USGS data release , serves as an archive of sediment data from 14 vibracores collected on April 10 and 11, 2016 (USGS Field Activity Number 2016–322–FA ), along 6 transects that extend from the upper to lower subaerial shoreface at Fire Island. Sedimentologic and stratigraphic metrics (for example, sediment texture or unit thicknesses) derived from these data can be used to assess spatial and temporal trends and may aid in understanding beach evolution. Data products include sample location tables, descriptive core logs, core photographs, results of sediment grain-size analyses, and geographic information system data files with accompanying formal Federal Geographic Data Committee metadata.

New York↗

USGS2020

Inundation exposure assessment for Majuro Atoll, Republic of the Marshall Islands using a high-accuracy digital elevation model

Majuro Atoll in the central Pacific has high coastal vulnerability due to low-lying islands, rising sea level, high wave events, eroding shorelines, a dense population center, and limited freshwater resources. Land elevation is the primary geophysical variable that determines exposure to inundation in coastal settings. Accordingly, coastal elevation data (with accuracy information) are critical for assessments of inundation exposure. Previous research has demonstrated the importance of using high-accuracy elevation data and rigorously accounting for uncertainty in inundation assessments. A quantitative analysis of inundation exposure was conducted for Majuro Atoll, including accounting for the cumulative vertical uncertainty from the input digital elevation model (DEM) and datum transformation. The project employed a recently produced and validated DEM derived from structure-from-motion processing of very-high-resolution aerial imagery. Areas subject to marine inundation (direct hydrologic connection to the ocean) and low-lying lands (disconnected hydrologically from the ocean) were mapped and characterized for three inundation levels using deterministic and probabilistic methods. At the highest water level modeled (3.75 ft, or 1.143 m), more than 34% of the atoll study area is likely to be exposed to inundation (68% chance or greater), while more than 20% of the atoll is extremely likely to be exposed (95% chance or greater). The study demonstrates the substantial value of a high-accuracy DEM for assessing inundation exposure of low-relief islands and the enhanced information from accounting for vertical uncertainty.

Majuro Atoll↗

USGS1989

1989 Exclusive Economic Zone symposium: Summary and recommendations

The fourth in a series of biennial national Exclusive Economic Zone symposia was held on November 14–16, 1989 . The purpose of the meeting was to examine ongoing and planned mapping and research activities in the ocean waters of the United States. Approximately 220 individuals attended the meeting. Issues discussed related to digital seafloor mapping projects, cooperative federal‐state programs, and requirements for additional data and information. Symposium recommendations included the need for increased surveying in coastal waters, development of standards for digital data dissemination, increased coordination with coastal states and federal agencies, and additional geophysical measurement systems abroad all mapping ships.

Marine Geodesy↗

USGS2012

Statistical averaging of marine magnetic anomalies and the aging of oceanic crust

Visual comparison of Mesozoic and Cenozoic magnetic anomalies in the North Pacific suggests that older anomalies contain less short-wavelength information than younger anomalies in this area. To test this observation, magnetic profiles from the North Pacific are examined from crust of three ages: 0–2.1, 29.3–33.1, and 64.9–70.3 m.y, B.P. For each time period, at least nine profiles were analyzed by (1) calculating the power density spectrum of each profile, (2) averaging the spectra together, and (3) computing a ‘recording filter’ for each time period by assuming a hypothetical seafloor model. The model assumes that the top of the source is acoustic basement, the source thickness is 0.5 km, and the time scale of geomagnetic reversals is according to Ness et al. (1980). The calculated power density spectra of the three recording filters are complex in shape but show an increase of attenuation of short-wavelength information as the crust ages. These results are interpreted using a multilayer model for marine magnetic anomalies in which the upper layer, corresponding to pillow basalt of seismic layer 2A, acts as a source of noise to the magnetic anomalies. As the ocean crust ages, this noisy contribution by the pillow basalts becomes less significant to the anomalies. Consequently, magnetic sources below layer 2A must be faithful recorders of geomagnetic reversals.

Journal of Geophysical Research Solid Earth↗

USGS2012

Tectonics and conductivity structures in the Southern Washington Cascades

The tectonic setting of the southern Washington Cascades has been studied with the aid of magnetotelluric (MT) and other geophysical data. The main feature of interest in the geophysical data is a broad high-conductivity anomaly mapped with MT and geomagnetic variation (GMV) data. This anomaly is located roughly within the triangle formed by the volcanoes Mount Rainier, Mount St. Helens, and Mount Adams but exceeds beyond Mount Rainier to the northwest. We interpret the cause of the anomaly to be conductive rocks with resistivities of 1–4 ohm m and thicknesses possibly greater than 15 km. These conductive rocks are found 2–8 km beneath the overlying less conductive volcanic and sedimentary rocks at the surface. Two aeromagnetic lows follow the trend of the conductivity anomaly, and linear belts of strike-slip seismicity are coincident with both these magnetic lows. One of the aeromagnetic lows is coincident with the western margin of the conductivity anomaly. The geophysical data appear to outline a suture zone of probable Eocene age caused by accretion of a large seamount complex (Siletzia) and that may contain large thicknesses of compressed forearc basin and accretionary prism sedimentary rocks of Cretaceous to Eocene age. Part of the shallower conductive rocks may be associated with carbonaceous continental and transitional marine sedimentary rocks of the Puget Group. The contact between the hypothesized compressed basin and the accreted terranes to the west may localize the release of shear stresses in this region of oblique subduction. Several possible explanations for the conductivity anomaly are considered in addition to the compressed basin hypothesis.

Washington↗

USGS2014

Refining the link between the Holocene development of the Mississippi River Delta and the geologic evolution of Cat Island, MS: implications for delta-associated barrier islands

The geologic evolution of barrier islands is profoundly influenced by the nature of the deposits underlying them. Many researchers have speculated on the origin and evolution of Cat Island in Mississippi, but uncertainty remains about whether or not the island is underlain completely or in part by deposits associated with the past growth of the Mississippi River delta. In part, this is due to a lack of comprehensive geological information offshore of the island that could augment previous stratigraphic interpretations based on terrestrial borings. An extensive survey of Cat Island and its surrounding waters was conducted, including shallow-water geophysics (e.g., high-resolution chirp seismic, side-scan sonar, and swath and single-beam bathymetry) and both terrestrial and marine vibracoring. High-resolution seismic data and vibracores from south and east of the island show two horizontally laminated silt units; marine radiocarbon dates indicate that they are St. Bernard delta complex (SBDC) deposits. Furthermore, seismic data reveal that the SBDC deposits taper off toward the southern shoreline of Cat Island and to the west, morphology consistent with the distal edge of a delta complex. The sedimentology and extent of each unit suggest that the lower unit may have been deposited during an earlier period of continuous river flow while the upper unit may represent reduced or sporadic river flow. OSL dates from the island platform (beneath beach ridge complexes) indicate three stages of terrestrial evolution: island emergence resulting from relative sea-level rise (~ 5400 ybp) island aggradation via littoral transport (~ 2500–4000 ybp) and island degradation due to delta-mediated changes in wave direction (present– ~ 3600 ybp). Finally, the combination of terrestrial and marine data shows that portions of Cat Island that are lower in elevation than the central part of the island are younger and are likely underlain by a thin layer of deltaic sediments. This underscores the potential for increased future vulnerability of barrier islands that develop adjacent to major river delta complexes.

Mississippi↗

USGS1972

Acoustic-reflection profiles, Bay of Campeche: International Decade of Ocean Exploration, U.S. Geological Survey, Leg 1, 1971 cruise, UNITEDGEO I

Introduction As part of a cooperative marine research program designated the International Decade of Ocean Exploration (IDOE), the United States Geological Survey is participating in an investigation of the geologic framework and resource potential of continental margins and small ocean basins in the Gulf of Mexico, Caribbean Sea, and west African continental shelf areas. These studies are funded through the National Science Foundation. Acoustic-reflection profiles of Leg 1, described in this report concern mainly a 200 X 250 kilometer project area in the Bay of Campeche in the southwestern part of the Gulf of Mexico. The cruise leg began at Corpus Christi, Texas, and ended at Veracruz, Mexico. Other geophysical records collected during the cruise include magnetometry, gravimetry, and bathymetry. Visiting scientists from the Institute of Geophysics of the National University of Mexico, the Oceanographic Commission of the Mexican Navy, and the Mexican Institute of Petroleum joined the research vessel UNITEDGEO I throughout the cruise in the Bay of Campeche. The cruise offered an excellent opportunity for scientific interchange between investigators from Mexico and the United States and permitted collaboration in the instrumentation, operational techniques, and interpretation of acoustic-reflection records aboard the research vessel.

Bay Of Campeche;Gulf Of Mexico↗

USGS2010

Biological communities in San Francisco Bay track large‐scale climate forcing over the North Pacific

Long‐term observations show that fish and plankton populations in the ocean fluctuate in synchrony with large‐scale climate patterns, but similar evidence is lacking for estuaries because of shorter observational records. Marine fish and invertebrates have been sampled in San Francisco Bay since 1980 and exhibit large, unexplained population changes including record‐high abundances of common species after 1999. Our analysis shows that populations of demersal fish, crabs and shrimp covary with the Pacific Decadal Oscillation (PDO) and North Pacific Gyre Oscillation (NPGO), both of which reversed signs in 1999. A time series model forced by the atmospheric driver of NPGO accounts for two‐thirds of the variability in the first principal component of species abundances, and generalized linear models forced by PDO and NPGO account for most of the annual variability of individual species. We infer that synchronous shifts in climate patterns and community variability in San Francisco Bay are related to changes in oceanic wind forcing that modify coastal currents, upwelling intensity, surface temperature, and their influence on recruitment of marine species that utilize estuaries as nursery habitat. Ecological forecasts of estuarine responses to climate change must therefore consider how altered patterns of atmospheric forcing across ocean basins influence coastal oceanography as well as watershed hydrology.

California↗

USGS2011

Doctorate time rising sharply: How long should it take?

The period 1967–1987 saw a 20% increase in the time it takes to complete the doctorate. That figure is based on data provided by the National Research Council from 11 scientific and engineering fields, including the Earth, atmospheric and marine sciences. The median time spent earning the degree rose from 5.4 years in 1967 to 6.1 years in 1977 to 6.9 years in 1987—an increase of 1.5 years in a single generation. Completion time still seems to be rising! All graduating doctoral students in 1987 had a median age of 33.6 years; chemistry students were youngest at 29, and education students were the oldsters at 39.8 years.

Eos, Transactions, American Geophysical Union↗

USGS2000

Geology and coastal hazards in the northern Monterey Bay, California: Field trip guidebook, November 4, 2000

The purpose of this field trip is to explore the relationships between local geology, coastal hazards, and human influences in the northern Monterey Bay, which is a tectonically active high wave energy coastal environment. Seacliffs, shore platforms, pocket beaches and a headland/embayment morphology characterize this rocky coastline. Many studies of the onshore and offshore geology and geophysics, the local wave climate, and the effects of large storm events and earthquakes on the coastline have been conducted in this region (see Related Reading section). This field trip summarizes many of the findings of these research investigations, and also considers the relationship between the rates and styles of seacliff erosion and the variations in the local geology. The field trip stops allow the participant to examine seacliff sites of different geological lithologies, geographic orientations, and varying protection from wave attack, and consider how these variables affect not only the rate or magnitude of seacliff retreat but also the styles of retreat. In general the two primary forcing factors in the retreat of seacliffs are marine and terrestrial processes. At the various field trip stops, the relative importance of these processes in shaping the coastline at that particular location will be explored. Where beaches have developed, whether naturally or by emplacement of man-made structures, field trip stops are designed to look at the occurrence of the beaches (why they exist where they do) and to understand the response of the beaches to large storm events. Finally, this trip focuses on the various coastline protection structures that have been built in the area, and their effectiveness in protecting development on the beaches or at the tops of the seacliffs. The first stop of the trip is the Long Marine Lab facility where the seacliffs are composed of the most resistant geological unit in the area, the Miocene Santa Cruz Mudstone. This stop also includes discussion of some of the interesting geological features associated with this part of the Bay, including the arches at Natural Bridges State Beach. The field trip stops are progressively east and south, moving into the inner Monterey Bay, as well as into the less resistant lithologies of the late Miocene to Pliocene Purisima Formation, and finally the Pleistocene Aromas Sand. The route will follow the coast wherever possible so participants can get a full perspective of the northern Monterey Bay coastline, even where stops have not been planned.

California↗

USGS2012

2008 Joint United States-Canadian program to explore the limits of the Extended Continental Shelf aboard the U.S. Coast Guard cutter Healy --Cruise HLY0806

In September 2008, the U.S. Geological Survey (USGS), in cooperation with Natural Resources Canada, Geological Survey of Canada (GSC), conducted bathymetric and geophysical surveys in the Arctic Beaufort Sea aboard the U.S. Coast Guard cutter USCGC Healy . The principal objective of this mission to the high Arctic was to acquire data in support of delineation of the outer limits of the U.S. and Canadian Extended Continental Shelf (ECS) in the Arctic Ocean in accordance with the provisions of Article 76 of the Law of the Sea Convention. The Healy was accompanied by the Canadian Coast Guard icebreaker Louis S. St- Laurent . The science parties on the two vessels consisted principally of staff from the USGS ( Healy ), and the GSC and the Canadian Hydrographic Service ( Louis ). The crew included marine mammal and Native-community observers, ice observers, and biologists conducting research of opportunity in the Arctic Ocean. The joint survey proved an unqualified success. The Healy collected 5,528 km of swath (multibeam) bathymetry (38,806 km 2 ) and CHIRP subbottom profile data, with accompanying marine gravity measurements. The Louis acquired 2,817 km of multichannel seismic (airgun) deep-penetration reflection-profile data along 12 continuous lines, as well as 35 sonobuoy refraction stations and accompanying single-beam bathymetry. The coordinated efforts of the two vessels resulted in seismic-reflection profile data of much higher quality and continuity than if the data had been acquired with a single vessel alone. Equipment failure rate of the seismic equipment gear aboard the Louis was greatly improved with the advantage of having a leading icebreaker. When ice conditions proved too severe to deploy the seismic system, the Louis led the Healy , resulting in much improved quality of the swath bathymetry and CHIRP sub-bottom data in comparison with data collected by the Healy in the lead or working alone. Ancillary science objectives, including ice observations, deployment of ice-monitoring buoys and water-column sampling for biologic (phytoplankton) studies, were also successfully accomplished.

Open-File Report↗

USGS1987

Maps showing distribution of the Middle Cretaceous unconformity in the eastern Gulf of Mexico

Several theories on the origin of the Gulf of Mexico basin have been introduced by various researchers (Beloussov, 1970; Freeland and Dietz, 1971; Malfait and Dinkelman, 1972; Wood and Walper, 1974; Pilger, 1978; Buffler and others, 1980; Dickinson and Coney, 1980; Gose and others, 1980; Schmidt-Effing, 1980; Walper, 1980; Schlager and others, 1984). Although no final agreement has been reached, one prominent geologic feature is generally recognized. The early evolution of the basin ended with a major middle Cretaceous event resulting in a Gulf-wide unconformity referred to as the middle Cretaceous unconformity (MCU). This event represents a major shift from Early Cretaceous shallow-water bank sedimentation to Late Cretaceous deeper water carbonates (Worzel and others, 1973; Mitchum, 1978). Seismic data collected by the U.S. Geological Survey and the University of Texas Marine Science Institute, Galveston Geophysics Laboratory (UTMSI-GGL) were used to map the MCU and its relationship to the deep stratigraphy and structure of the eastern Gulf basin east of long 90° W. In addition, data from the Deep Sea Drilling Project (DSDP) in the southeastern Gulf and along the Campeche Escarpment and dredge samples collected by Schlager and others (1984) from the Florida Escarpment provide an age for the MCU (Cenomanian, 97 m. y. ) and a detailed lithological record. This report emphasizes the salt diapirs, pillows, and ridges in the northeastern Gulf of Mexico because of the profound effect these geologic structures have on the MCU. Salt locations are shown on the isopach of post-MCU sediments (fig. 1). A second map shows pre-middle Cretaceous outcrops terminated by the MCU along the Florida Escarpment, the southeastern Gulf, and the Campeche Escarpment (fig. 2).

Miscellaneous Field Studies Map↗

USGS1992

Map showing sediment isopachs in the deep-sea basins of the Pacific continental margin, Point Conception to Point Loma

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. index map for I-2089-A See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗

USGS1992

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Point Conception to Point Loma

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. index map for I-2089-A See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗