Search USGS⌕ Search

SEARCH · Search USGS

Results for “Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2007

Airborne laser swath mapping of the Denton Hills, Transantarctic Mountains, Antarctica: Applications for structural and glacial geomorphic mapping

High-resolution digital elevation data acquired by airborne laser scanning (ALS) for the Denton Hills, along the coastal foothills of the Royal Society Range, Transantarctic Mountains, are examined for applications to bedrock and glacial geomorphic mapping. Digital elevation models (DEMs), displayed as shaded-relief images and slope maps, portray geomorphic landscape features in unprecedented detail across the region. Structures of both ductile and brittle origin, ranging in age from the Paleozoic to the Quaternary, can be mapped from the DEMs. Glacial features, providing a record of the limits of grounded ice, of lake paleoshorelines, and of proglacial lake-ice conveyor deposits, are also prominent on the DEMs. The ALS-derived topographic data have great potential for a range of mapping applications in regions of ice-free terrain in Antarctica

Open-File Report↗
USGS2015

Geologic and geophysical maps of the El Casco 7.5′ quadrangle, Riverside County, southern California, with accompanying geologic-map database

Introduction Earth materials and structures in the El Casco quadrangle provide considerable information about the late Cenozoic geologic evolution of southern California’s Inland Empire region (fig. 2). Important structural and stratigraphic elements include (1) modern traces of the right-lateral San Jacinto Fault zone, (2) older traces of the San Jacinto Fault zone, and (3) sedimentary materials and geologic structures that formed during the last eight million years or so and that record interactions within the San Andreas Fault system. These materials, and the structures that deform them, provide a geologic context 3 for investigations of groundwater recharge and subsurface flow (Waring, 1919; Burnham and Dutcher, 1960; Bloyd, 1971; Rewis and others, 2006). This geologic database of the El Casco 7.5′ quadrangle was prepared by the Basins and Landscape Co-Evolution Project (BALANCE), a regional geologic-mapping project sponsored jointly by the U.S. Geological Survey and the California Geological Survey. The database was developed as a contribution to the National Cooperative Geologic Mapping Program’s National Geologic Map Database, and provides a general geologic setting of the El Casco quadrangle. The database and map provide information about earth materials and geologic structures, including faults and folds that have developed in the quadrangle due to complexities in the San Andreas Fault system. Geologic information contained in the El Casco database is general-purpose data applicable to land-related investigations in the earth and biological sciences. The term “general-purpose” means that all geologic-feature classes have minimal information content adequate to characterize their general geologic characteristics and to interpret their general geologic history. However, no single feature class has enough information to definitively characterize its properties and origin. For this reason the database cannot be used for site-specific geologic evaluations, although it can be used to plan and guide investigations at the site-specific level.

California↗
USGS2014

Geologic map of metallic and nonmetallic mineral deposits, Badakhshan Province, Afghanistan, modified from the 1967 original map compilation of G.G. Semenov and others

This geologic map of central Badakhshan Province, Afghanistan, is a combined, redrafted, and modified version of the Geological map of central Badakhshan, scale 1:200,000 (sheet 217), and Map of minerals of central Badakhshan, scale 1:200,000 (also sheet 217) from Semenov and others (1967) (Soviet report no. R0815). That unpublished Soviet report contains the original maps and cross sections, which were prepared in cooperation with the Ministry of Mines and Industries of the Republic of Afghanistan in 1967 under contract no. 1378 (Technoexport, USSR). This USGS publication also includes the gold metallogeny summarized in Abdullah and others (1977) and Peters and others (2007, 2011), and additional compilations from Guguev and others (1967). Badakhshan Province consists of volcanic, sedimentary, and metamorphic rocks of various ages from late Proterozoic to Cenozoic. The rocks are intensively dislocated and cut by intrusions of magmatic rocks. Primary gold occurrences are distinguished in shear zones with hydrothermal alterations or in contact-metasomatic rocks near magmatic intrusions.

Badakhshan↗
USGS2023

Bathymetric contour maps, surface area and capacity tables, and bathymetric change maps for selected water-supply lakes in northeastern Missouri, 2021

Bathymetric data were collected at 12 water-supply lakes in northeastern Missouri by the U.S. Geological Survey (USGS) in cooperation with the Missouri Department of Natural Resources (MoDNR) and various local agencies, as part of a multiyear effort to establish or update the surface area and capacity tables for the surveyed lakes. The lakes were surveyed in March through May 2021. Ten of the lakes had been surveyed previously by the USGS, and the recent surveys were compared to the earlier surveys to document the changes in the bathymetric surface and capacity of the lakes. Bathymetric data were collected using a high-resolution multibeam mapping system mounted on a boat. Supplemental depth data at five of the lakes were collected in shallow areas with an acoustic Doppler current profiler on a remote-controlled boat. Data points from the various sources were exported at a gridded data resolution appropriate to each lake, either 0.82 foot, 1.64 feet, or 3.28 feet. Data outside the multibeam survey extent and greater than the surveyed water-surface elevation were obtained from data collected using aerial light detection and ranging (lidar) point cloud data. A linear enforcement technique was used to add points to the dataset in areas of sparse data (the upper ends of coves where the water was shallow or aquatic vegetation precluded data acquisition) based on surrounding multibeam and upland data values. The various point datasets were used to produce a three-dimensional triangulated irregular network surface of the lake-bottom elevations for each lake. A surface area and capacity table was produced from the three-dimensional surface for each lake showing surface area and capacity at specified lake water-surface elevations. Various quality-assurance tests were conducted to ensure quality data were collected with the multibeam, including beam angle checks and patch tests. Additional quality-assurance tests were conducted on the gridded bathymetric data from the survey, the bathymetric surface created from the gridded data, and the contours created from the bathymetric survey. If there were data from a previous bathymetric survey for a given lake, a bathymetric change map was generated from the elevation difference between the previous survey and the 2021 bathymetric survey data points. After reconciling any vertical datum disagreement between the previous survey data and the 2021 survey datum, coincident points between the surveys were identified, and a bathymetric change map was generated using the coincident point data. The mean elevation change between all repeat surveys at most lakes was positive, indicating sedimentation. Relative to previous surveys, the change in capacity at the primary spillway elevation ranged from a 7.7-percent decrease at Memphis Reservoir to a 3.9-percent increase at Old Lake (Bowling Green West). The mean bathymetric change ranged from 0.03 foot at Hazel Creek and 0.07 foot at Shelbina Lake and Bowling Green Reservoir (Jack Floyd Memorial Lake) to 0.63 at Memphis Lake (Lake Showme) and 0.88 at Memphis Reservoir. The time-averaged mean bathymetric change ranged from 0.002 foot per year at Hazel Creek Lake to 0.044 foot per year at Memphis Reservoir. The computed volumetric sedimentation rate generally ranged from 0.14 to 6.80 acre-feet per year at Shelbina Lake and Memphis Lake (Lake Showme), respectively; however, Forest Lake had a substantially larger sedimentation rate of 17.0 acre-feet per year. Some changes observed in some bathymetric change maps are believed to result from the difference in data collection equipment and techniques between the previous and present bathymetric surveys, whereas other erosional features around the perimeter of certain lakes may be the result of wave action during low-water years.

Missouri↗
USGS1986

Spatial diversity index mapping of classes in grid cell maps.

The landscape diversity index indicates the number of classes of land that are in proximity to each point in a digital grid cell map. The index is D=100(i-1)/(n-1), where i = the number of landscape classes within a selected distance of each grid cell and n = the total number of mapped classes. The use of the index is illustrated by calculating the diversity index at each grid cell for each of five mapped classes and displaying the resulting diversity index map that portrays the complexity of the scene. The method is applicable to land-use planning, site selection, or description of landscape complexity.-Author

Photogrammetric Engineering and Remote Sensing↗
USGS2008

Geologic map of Mount Mazama and Crater Lake Caldera, Oregon, including the database for the geologic map of Mount Mazama and Crater Lake Caldera, Oregon

Crater Lake partly fills one of the most spectacular calderas of the world, an 8-by-10-km basin more than 1 km deep formed by collapse of the volcano known as Mount Mazama (fig. 1) during a rapid series of explosive eruptions about 7,700 years ago. Having a maximum depth of 594 m, Crater Lake is the deepest lake in the United States. Crater Lake National Park, dedicated in 1902, encompasses 645 km2 of pristine forested and alpine terrain, including the lake itself, virtually all of Mount Mazama, and most of the area of the geologic map. The geology of the area was first described in detail by Diller and Patton (1902) and later by Williams (1942), whose vivid account led to international recognition of Crater Lake as the classic collapse caldera. Because of excellent preservation and access, Mount Mazama, Crater Lake caldera, and the deposits formed by the climactic eruption constitute a natural laboratory for study of volcanic and magmatic processes. For example, the climactic ejecta are renowned among volcanologists as evidence for systematic compositional zonation within a subterranean magma chamber. Mount Mazama's climactic eruption also is important as the source of the widespread Mazama ash, a useful Holocene stratigraphic marker throughout the Pacific Northwest, adjacent Canada, and offshore. A detailed bathymetric survey of the floor of Crater Lake in 2000 (Bacon and others, 2002) provides a unique record of postcaldera eruptions, the interplay between volcanism and filling of the lake, and sediment transport within this closed basin. Knowledge of the geology and eruptive history of the Mount Mazama edifice, greatly enhanced by the caldera wall exposures, gives exceptional insight into how large volcanoes of magmatic arcs grow and evolve. Lastly, the many smaller volcanoes of the High Cascades beyond the limits of Mount Mazama are a source of information on the flux of mantle-derived magma through the region. General principles of magmatic and eruptive processes revealed by the present study have been incorporated not only in scientific investigations elsewhere, but in the practical evaluation of hazards (Bacon and others, 1997b) and geothermal resources (Bacon and Nathenson, 1996) in the Crater Lake region. In addition to papers in scientific journals, field trip guides, and the hazard and geothermal reports, the major product of this long-term study of Mount Mazama is the geologic map. The map is unusual because it portrays bedrock (outcrop), surficial, and lake floor geology. Caldera wall geology is depicted in detail on the accompanying geologic panoramas.

Oregon↗
USGS2022

Synthetic aperture radar volcanic flow maps (SAR VFMs): A simple method for rapid identification and mapping of volcanic mass flows

Volcanic mass flows, including lava, pyroclastic density currents, and lahars, account for the bulk of fatalities and infrastructure damage caused by volcanic eruptions. Mapping these flows soon after their emplacement is vital to understanding their impact and to forecasting the likely behavior of potential future flows. Synthetic aperture radar (SAR) can provide useful information about surface properties and changes regardless of environmental conditions or time of day, but no individual SAR product can unambiguously detect and map surface mass flows in all conditions. Combining SAR products, however, can capitalize on the strengths and compensate for the weaknesses of individual data types. SAR volcanic flow maps (SAR VFMs) merge cross-polarized amplitude imagery from two different dates with interferometric coherence spanning those dates. The combination of amplitude change with coherence provides a means of detecting volcanic mass flows regardless of surface conditions, and data collected by satellite provide the spatial coverage needed to detect changes over broad areas. Application to eruptions of Kīlauea (Hawaiʻi), Nyiragongo (Democratic Republic of Congo), Sinabung (Indonesia), and Fuego (Guatemala) demonstrate the value of SAR VFMs for monitoring hazardous volcanic activity, and the importance of acquiring cross-polarized satellite SAR imagery for volcano applications. The ever-growing number of public and private satellite SAR missions will provide for improved temporal resolution in SAR VFMs in the future, and the technique may be suitable for automated analysis that is capable of timely identification of changes due to volcanic activity, even in areas that are otherwise unmonitored.

Hawaii↗
USGS2021

Imaging spectroscopy applied to mineral mapping over large areas: Impact of residual atmospheric artefacts in reflectance spectra on mineral identification and mapping

Around the world, imaging spectroscopy (hyperspectral imaging) has been successfully applied to mapping surface minerals over small areas. In this paper, we examine one challenge to reliably mapping surface mineral composition over large areas: the impacts of atmospheric artefacts in reflectance spectra on mineral identification. To examine these impacts, we use a set of Airborne Visible and Infrared Imaging Spectrometer-Classic (AVIRISc) data collected over ~30,000 sq. km of southern California (SoCal) in 2018. The AVIRISc2018 SoCal reflectance data showed residual atmospheric contamination in wavelength regions at the edges of strong water vapor absorption features: 1.44-1.5 µm, 1.75-1.8 µm, and 2.35-2.5 µm. These three regions of atmospheric residuals affect identification and discrimination of mineral absorption features, especially when mineral abundances are low and spectral features are weak. Of these three regions, improving atmospheric correction of imaging spectrometer data in the 2.35-2.5 µm region will result in the most enhancement in mineral identification, discrimination, and mapping. An additional region near 2.2 µm affects phyllosilicate mineral identification. The cause of the distorted reflectance in this region is still being investigated.

Conference Paper↗
USGS2016

St. Louis area earthquake hazards mapping project; seismic and liquefaction hazard maps

We present probabilistic and deterministic seismic and liquefaction hazard maps for the densely populated St. Louis metropolitan area that account for the expected effects of surficial geology on earthquake ground shaking. Hazard calculations were based on a map grid of 0.005°, or about every 500 m, and are thus higher in resolution than any earlier studies. To estimate ground motions at the surface of the model (e.g., site amplification), we used a new detailed near‐surface shear‐wave velocity model in a 1D equivalent‐linear response analysis. When compared with the 2014 U.S. Geological Survey (USGS) National Seismic Hazard Model, which uses a uniform firm‐rock‐site condition, the new probabilistic seismic‐hazard estimates document much more variability. Hazard levels for upland sites (consisting of bedrock and weathered bedrock overlain by loess‐covered till and drift deposits), show up to twice the ground‐motion values for peak ground acceleration (PGA), and similar ground‐motion values for 1.0 s spectral acceleration (SA). Probabilistic ground‐motion levels for lowland alluvial floodplain sites (generally the 20–40‐m‐thick modern Mississippi and Missouri River floodplain deposits overlying bedrock) exhibit up to twice the ground‐motion levels for PGA, and up to three times the ground‐motion levels for 1.0 s SA. Liquefaction probability curves were developed from available standard penetration test data assuming typical lowland and upland water table levels. A simplified liquefaction hazard map was created from the 5%‐in‐50‐year probabilistic ground‐shaking model. The liquefaction hazard ranges from low (<40% of area expected to liquefy) in the uplands to severe (>60% of area expected to liquefy) in the lowlands. Because many transportation routes, power and gas transmission lines, and population centers exist in or on the highly susceptible lowland alluvium, these areas in the St. Louis region are at significant potential risk from seismically induced liquefaction and associated ground deformation

Alabama, Arkansas, Illinois, Indiana, Iowa, Kentuc↗
USGS2002

The National Map: Topographic Maps for the 21st Century

The U.S. Geological Survey (USGS) is committed to meeting the Nation's needs for current base geographic data and maps. Our vision is that, by working with partners, we will provide the Nation with access to current, accurate, and nationally consistent digital data and topographic maps derived from those data. This synthesis of information, products, and capabilities, The National Map, will be a seamless, continuously maintained set of geographic base information that will serve as a foundation for integrating, sharing, and using other data easily and consistently.

Fact Sheet↗
USGS2001

The National Map: Topographic Maps for the 21st Century

The U.S. Geological Survey (USGS) is committed to meeting the Nation's needs for current base geographic data and maps. Our vision is that, by working with partners, we will provide the Nation with access to current, accurate, and nationally consistent digital data and topographic maps derived from those data. This synthesis of information, products, and capabilities, The National Map, will be a seamless, continuously maintained set of geographic base information that will serve as a foundation for integrating, sharing, and using other data easily and consistently.

Fact Sheet↗
USGS2006

The National Map: Topographic Maps for the 21st Century

The U.S. Geological Survey (USGS) is committed to meeting the Nation's needs for current base geographic data and maps. Our vision is that, by working with partners, we will provide the Nation with access to current, accurate, and nationally consistent digital data and topographic maps derived from those data. This synthesis of information, products, and capabilities, The National Map, will be a seamless, continuously maintained set of geographic base information that will serve as a foundation for integrating, sharing, and using other data easily and consistently.

Fact Sheet↗
USGS2006

Coastal-change and glaciological map of the Trinity Peninsula area and south Shetland Islands, Antarctica: 1843-2001: Chapter A in Coastal-change and glaciological maps of Antarctica

Changes in the area and volume of polar ice sheets are intricately linked to changes in global climate, and the resulting changes in sea level could severely impact the densely populated coastal regions on Earth. Melting of the West Antarctic part alone of the Antarctic ice sheet would cause a sea-level rise of approximately 6 meters (m). The potential sea-level rise after melting of the entire Antarctic ice sheet is estimated to be 65 m (Lythe and others, 2001) to 73 m (Williams and Hall, 1993). In addition to its importance, the mass balance (the net volumetric gain or loss) of the Antarctic ice sheet is highly complex, responding differently to different conditions in each region (Vaughan, 2005). In a review paper, Rignot and Thomas (2002) concluded that the West Antarctic ice sheet is probably becoming thinner overall; although it is thickening in the west, it is thinning in the north. Thomas and others (2004), on the basis of aircraft and satellite laser altimetry surveys, believe the thinning may be accelerating. Joughin and Tulaczyk (2002), on the basis of analysis of ice-flow velocities derived from synthetic aperture radar, concluded that most of the Ross ice streams (ice streams on the east side of the Ross Ice Shelf) have a positive mass balance, whereas Rignot and others (2004) infer even larger negative mass balance for glaciers flowing northward into the Amundsen Sea, a trend suggested by Swithinbank and others (2003a,b, 2004). The mass balance of the East Antarctic ice sheet is thought by Davis and others (2005) to be strongly positive on the basis of the change in satellite altimetry measurements made between 1992 and 2003. Measurement of changes in area and mass balance of the Antarctic ice sheet was given a very high priority in recommendations by the Polar Research Board of the National Research Council (1986), in subsequent recommendations by the Scientific Committee on Antarctic Research (SCAR) (1989, 1993), and by the National Science Foundation's (1990) Division of Polar Programs. On the basis of these recommendations, the U.S. Geological Survey (USGS) decided that the archive of early 1970s Landsat 1, 2, and 3 Multispectral Scanner (MSS) images of Antarctica and the subsequent repeat coverage made possible with Landsat and other satellite images provided an excellent means of documenting changes in the coastline of Antarctica (Ferrigno and Gould, 1987). The availability of this information provided the impetus for carrying out a comprehensive analysis of the glaciological features of the coastal regions and changes in ice fronts of Antarctica (Swithinbank, 1988; Williams and Ferrigno, 1988). The project was later modified to include Landsat 4 and 5 MSS and Thematic Mapper (TM) [and in some areas Landsat 7 Enhanced Thematic Mapper Plus (ETM+)], RADARSAT images, and other data where available, to compare changes that occurred during a 20- to 25- or 30-year time interval (or longer where data were available, as in the Antarctic Peninsula). The results of the analysis are being used to produce a digital database and a series of USGS Geologic Investigations Series Maps (I–2600) consisting of 23 maps at 1:1,000,000 scale and 1 map at 1:5,000,000 scale, in both paper and digital format (Williams and others, 1995; Williams and Ferrigno, 1998; Ferrigno and others, 2002).

IMAP↗
USGS1980

Heat Capacity Mapping Mission (HCMM) thermal surface water mapping and its correlation to Landsat

The Heat Capacity Mapping Mission (HCMM) involves a relatively simple satellite recording the radiation from the Earth in the thermal band (10.5 to 12.5 μ m) using an instantaneous field-of-view (IFOV, "footprint" or pixel) of 600 x 600 m. The enclosed graphics illustrate HCMM thermal mapping of water bodies as applied to Lake Anna. The HCMM digital data were produced by NASA and processed by the National Oceanographic and Atmospheric Administration/National Environmental Satellite Service (NOAA/NESS) into image and line-printer form for the U.S. Geological Survey. A Landsat image of Lake Anna illustrates the relationship between the Landsat multispectral scanner (MSS) and the HCMM data as now processed by NASA through their Image Processing Facility (IPF) which transforms the data to the same distortion-free Hotine Oblique Mercator (HOM) map projection. Spatial correlation of the two images is relatively simple by either analog or digital means and the HCMM image has a potential accuracy (root-mean-square error--rmse) approaching the 80 m of the original Landsat data.

Open-File Report↗
USGS1997

Proceedings of a workshop on digital mapping techniques; methods for geologic map data capture, management, and publication - June 2 - 5, 1997, Lawrence, Kansas

Introduction: From June 2-5, 1997, selected technical representatives of the USGS and State geological surveys participated in the 'AASG/USGS Digital Mapping Techniques' workshop in Lawrence, Kansas. The workshop was initiated by the AASG/USGS Data Capture Working Group, and was hosted by the Kansas Geological Survey (KGS). With a focus on methods for data capture and digital map production, the goal was to help move the state surveys and the USGS toward development of more cost-effective, flexible, and useful systems for digital mapping and GIS analysis.

Open-File Report↗
USGS1998

Digital geologic map of the Spokane 1:100,000 quadrangle, Washington and Idaho: A digital database for the 1990 N.L. Joseph map

Geologic data from the geologic map of the Spokane 1:100,000-scale quadrangle compiled by Joseph (1990) were entered into a geographic information system (GIS) as part of a larger effort to create regional digital geology for the Pacific Northwest. The map area is located in eastern Washington and extends across the state border into western Idaho (Fig. 1). This open-file report describes the methods used to convert the geologic map data into a digital format, documents the file structures, and explains how to download the digital files from the U.S. Geological Survey public access World Wide Web site on the Internet.

Idaho, Washington↗
USGS2009

Appendix B: Description of Map Units for Northeast Asia Summary Geodynamics Map

The major purposes of this chapter are to provide (1) an overview of the regional geology, tectonics, and metallogenesis of Northeast Asia for readers who are unfamiliar with the region, (2) a general scientific introduction to the succeeding chapters of this volume, and (3) an overview of the methodology of metallogenic and tectonic analysis used in this study. We also describe how a high-quality metallogenic and tectonic analysis, including construction of an associated metallogenic-tectonic model will greatly benefit other mineral resource studies, including synthesis of mineral-deposit models; improve prediction of undiscovered mineral deposit as part of a quantitative mineral-resource-assessment studies; assist land-use and mineral-exploration planning; improve interpretations of the origins of host rocks, mineral deposits, and metallogenic belts, and suggest new research. Research on the metallogenesis and tectonics of such major regions as Northeast Asia (eastern Russia, Mongolia, northern China, South Korea, and Japan) and the Circum-North Pacific (the Russian Far East, Alaska, and the Canadian Cordillera) requires a complex methodology including (1) definitions of key terms, (2) compilation of a regional geologic base map that can be interpreted according to modern tectonic concepts and definitions, (3) compilation of a mineral-deposit database that enables a determination of mineral-deposit models and clarification of the relations of deposits to host rocks and tectonic origins, (4) synthesis of a series of mineral-deposit models that characterize the known mineral deposits and inferred undiscovered deposits in the region, (5) compilation of a series of metallogenic-belt belts constructed on the regional geologic base map, and (6) construction of a unified metallogenic and tectonic model. The summary of regional geology and metallogenesis presented here is based on publications of the major international collaborative studies of the metallogenesis and tectonics of Northeast Asia that have been led by the U.S. Geological Survey (USGS). These studies have produced two broad types of publications (1) a series of regional geologic, mineral-deposit, and metallogenic-belt maps, with companion descriptions of the region, and (2) a suite of metallogenic and tectonic analyses of the same region. The study area consists of eastern Russia (most of eastern Siberia and the Russian Far East), Mongolia, northern China, South Korea, Japan, and adjacent offshore areas. The major cooperative agencies are the Russian Academy of Sciences; the Academy of Sciences of the Sakha Republic (Yakutia); VNIIOkeangeologia and Ministry of Natural Resources of the Russian Federation; the Mongolian Academy of Sciences; the Mongolian University of Science and Technology; the Mongolian National University; Jilin University, Changchun, People?s Republic of China, the China Geological Survey; the Korea Institute of Geosciences and Mineral Resources; the Geological Survey of Japan/AIST; the University of Texas, Arlington, and the U.S. Geological Survey (USGS). This study builds on and extends the data and interpretations from a previous project on the Major Mineral Deposits, Metallogenesis, and Tectonics of the Russian Far East, Alaska, and the Canadian Cordillera conducted by the USGS, the Russian Academy of Sciences, the Alaska Division of Geological and Geophysical Surveys, and the Geological Survey of Canada. The major products of this project were summarized by Naumova and others (2006) and are described in appendix A.

Professional Paper↗
USGS2012

Integration of new geologic mapping and satellite-derived quartz mapping yields insights into the structure of the Roberts Mountains allochthon applicable to assessments for concealed Carlin-type gold deposits

Geologic mapping and remote sensing across north-central Nevada enable recognition of a thick sheet of Middle and Upper Ordovician Valmy Formation quartzite that structurally overlies folded and faulted Ordovician through Devonian stratigraphic units of the Roberts Mountains allochthon. In the northern Independence Mountains and nearby Double Mountain area, the Valmy Formation is in fault contact with Ordovician through Silurian, predominantly clastic, sedimentary rocks of the Roberts Mountains allochthon that were deformed prior to, or during, emplacement of the Valmy thrust sheet. Similar structural relations are recognized discontinuously for 200 kilometers along the strike of the Roberts Mountains allochthon in mapping guided by regional remote-sensing-based (ASTER) quartz maps. Overall thicknesses of deformed Roberts Mountains allochthon units between the base of the Valmy and the top of underlying carbonate rocks that host large Carlin-type gold deposits varies on the order of hundreds of meters but is not known to exceed 700 meters. The base of the Valmy thrust sheet is a complimentary datum in natural resource exploration and mineral resource assessment for concealed Carlin-type gold deposits.

Nevada↗