Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Organic Chemistry”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

The structure and volume of large geysers in Yellowstone National Park, USA and the mineralogy and chemistry of their silica sinter deposits

Siliceous sinter is formed by biogenic and abiogenic opal deposition around hot springs and geysers. Using Structure-from-Motion photogrammetry we generated three-dimensional models of Giant and Castle Geysers from the Upper Geyser Basin of Yellowstone National Park. We use these models to calculate an approximate mass of sinter for each (~2 and ~ 5 kton, respectively) and estimate a range of plausible long-term deposition rates for Castle Geyser (470 to 940 kg·yr −1 ). We estimate ~2% of the silica discharged from Castle Geyser is deposited as sinter in the cone and proximal terraces. We collected 15 sinter samples following the stratigraphy of each geyser from an older terrace to a younger cone and examined them using a variety of analytical methods. We find that young opaline sinter with a water content of <12 wt% (from loss on ignition) contains higher concentrations of major and trace elements, notably As, Sb, Rb, Ga and Cs, relative to older dehydrated sinter. Rare earth element (REE) concentrations in sinter are 2–3 orders of magnitude higher than in the thermal water from which they are deposited. Sinter deposits are enriched in light REE, Gd and Yb when normalized to concentrations in thermal water and enriched in Eu, Tm, and Yb when normalized to the underlying rhyolite. Sinter samples with the highest REE concentrations are also enriched in organic material, implying either microbial uptake of REE, or that organic molecules are efficient ligands that form metal complexes.

Wyoming↗

Limnogeology in Brazil's "forgotten wilderness": A synthesis from the large floodplain lakes of the Pantanal

Sediment records from floodplain lakes have a large and commonly untapped potential for inferring wetland response to global change. The Brazilian Pantanal is a vast, seasonally inundated savanna floodplain system controlled by the flood pulse of the Upper Paraguay River. Little is known, however, about how floodplain lakes within the Pantanal act as sedimentary basins, or what influence hydroclimatic variables exert on limnogeological processes. This knowledge gap was addressed through an actualistic analysis of three large, shallow (<5 m) floodplain lakes in the western Pantanal: Lagoa Gaíva, Lagoa Mandioré and Baia Vermelha. The lakes are dilute (CO3 2- > Si 4+ > Ca 2+ ), mildly alkaline, freshwater systems, the chemistries and morphometrics of which evolve with seasonal flooding. Lake sills are bathymetric shoals marked by siliciclastic fans and marsh vegetation. Flows at the sills likely undergo seasonal reversals with the changing stage of the Upper Paraguay River. Deposition in deeper waters, typically encountered in proximity to margin-coincident topography, is dominated by reduced silty-clays with abundant siliceous microfossils and organic matter. Stable isotopes of carbon and nitrogen, plus hydrogen index measured on bulk organic matter, suggest that contributions from algae (including cyanobacteria) and other C3-vegetation dominate in these environments. The presence of lotic sponge spicules, together with patterns of terrigenous sand deposition and geochemical indicators of productivity, points to the importance of the flood pulse for sediment and nutrient delivery to the lakes. Flood-pulse plumes, waves and bioturbation likewise affect the continuity of sedimentation. Short-lived radioisotopes indicate rates of 0.11-0.24 cm year -1 at sites of uninterrupted deposition. A conceptual facies model, developed from insights gained from modern seasonal processes, can be used to predict limnogeological change when the lakes become isolated on the floodplain or during intervals associated with a strengthened flood pulse. Amplification of the seasonal cycle over longer time scales suggests carbonate, sandy lowstand fan and terrestrial organic matter deposition during arid periods, whereas deposition of lotic sponges, mixed aquatic organic matter, and highstand deltas characterizes wet intervals. The results hold substantial value for interpreting paleolimnological records from floodplain lakes linked to large tropical rivers with annual flooding cycles.

Bahia Vermelha, Brazilian Pantanal, Lagoa Gaiva, L↗

Influence of an igneous intrusion on the inorganic geochemistry of a bituminous coal from Pitkin County, Colorado

Although the effects of igneous dikes on the organic matter in coal have been observed at many localities there is virtually no information on the effects of the intrusions of the inorganic constituents in the coal. Such a study may help to elucidate the behavior of trace elements during in situ gasification of coal and may provide insights into the resources potential for coal and coke affected by the intrusion. To determine the effects of an igneous intrusion on the inorganic chemistry of a coal we used a series of 11 samples of coal and natural coke that had been collected at intervals from 3 to 106 cm from a dike that intruded the bituminous Dutch Creek coal in Pitkin, CO. The samples were chemically analyzed for 66 elements. SEM-EDX and X-ray diffraction analysis were performed on selected samples. Volatile elements such as F, Cl, Hg, and Se are not depleted in the samples (coke and coal) nearest the dike that were exposed to the highest temperatures. Their presence in these samples is likely due to secondary enrichment following volatilization of the elements inherent in the coal. Equilibration with ground water may account for the uniform distribution of Na, B, and Cl. High concentrations of Ca, Mg, Fe, Mn, Sr, and CO2 in the coke region are attributed to the reaction of CO and CO2 generated during the coking of the coal with fluids from the intrusion, resulting in the precipitation of carbonates. Similarly, precipitation of sulfide minerals in the coke zone may account for the relatively high concentrations of Ag, Hg, Cu, Zn, and Fe. Most elements are concentrated at the juncture of the fluidized coke and the thermally metamorphosed coal. Many of the elements enriched in this region (for example, Ga, Ge, Mo, Rb, U, La, Ce, Al, K, and Si) may have been adsorbed on either the clays or the organic matter or on both.Although the effects of igneous dikes on the organic matter in coal have been observed at many localities there is virtually no information on the effects of the intrusions on the inorganic constituents in the coal. Such a study may help to elucidate the behavior of trace elements during in situ gasification of coal and may provide insights into the resource potential of coal and coke affected by the intrusion. To determine the effects of an igneous intrusion on the inorganic chemistry of a coal we used a series of 11 samples of coal and natural coke that had been collected at intervals from 3 to 106 cm from a dike that intruded the bituminous Dutch Creek coal in Pitkin, CO. The samples were chemically analyzed for 66 elements. SEM-EDX and X-ray diffraction analysis were performed on selected samples. Volatile elements such as F, Cl, Hg, and Se are not depleted in the samples (coke and coal) nearest the dike that were exposed to the highest temperatures. Their presence in these samples is likely due to secondary enrichment following volatilization of the elements inherent in the coal. Equilibration with ground water may account for the uniform distribution of Na, B, and Cl. High concentrations of Ca, Mg, Fe, Mn, Sr, and CO2 in the coke region are attributed to the reaction of CO and CO2 generated during the coking of the coal with fluids from the intrusion, resulting in the precipitation of carbonates. Similarly, precipitation of sulfide minerals in the coke zone may account for the relatively high concentrations of Ag, Hg, Cu, Zn, and Fe. Most elements are concentrated at the juncture of the fluidized coke and the thermally metamorphosed coal. Many of the elements enriched in this region (for example, Ga, Ge, Mo, Rb, U, La, Ce, Al, K, and Si) may have been adsorbed on either the clays or the organic matter or on both.

International Journal of Coal Geology↗

Hazard ranking of contaminated sediments based on chemical analysis, laboratory toxicity tests, and benthic community composition: Prioritizing sites for remedial action

The U.S. Environmental Protection Agency (U.S. EPA) organized a research program to assess the extent of and possible methods for managing contaminated sediments. As part of this program, we developed a method by which multiple forms of information on sediment contamination (i.e., chemistry, laboratory toxicity, and benthic community composition) could be combined to rank the relative hazard to aquatic life of a series of sediment samples. The process that was developed incorporates chemistry and bioavailability into the ranking as toxic units in pore water based on U.S. EPA Ambient Water Quality Criteria (AWQC). Laboratory toxicity is incorporated into the ranking process as mean response relative to control response. Benthic community information is incorporated into the ranking process through the use of relative tolerance to pollution among benthic invertebrate taxa, from which the mean tolerance to pollution of the benthic community is calculated. The three resulting ranks are then averaged to produce a relative ranking of risk to aquatic life among sediment samples. Our results demonstrate that, as long as a moderate list of laboratory toxicity test results are included in the ranking process (i.e., tests from a fish, a zooplankter, a benthic invertebrate, a phytoplankter, and a microbe), the resultant rankings among samples does not significantly change with inclusion of more laboratory toxicity test results. Without any benthic community structure information, with only laboratory toxicity test results from Microtox, ® and with only a short list of chemicals, relative ranking among sites changes drastically. Our results demonstrate the general utility of the ranking process as one way of assessing the relative hazard among many sites when resource limitations necessitate prioritization of sites for remediation.

Journal of Great Lakes Research↗

Metallogeny of the Great Basin: Crustal evolution, fluid flow, and ore deposits

The Great Basin physiographic province in the Western United States contains a diverse assortment of world-class ore deposits. It currently (2006) is the world’s second leading producer of gold, contains large silver and base metal (Cu, Zn, Pb, Mo, W) deposits, a variety of other important metallic (Fe, Ni, Be, REE’s, Hg, PGE) and industrial mineral (diatomite, barite, perlite, kaolinite, gallium) resources, as well as petroleum and geothermal energy resources. Ore deposits are most numerous and largest in size in linear mineral belts with complex geology. U.S. Geological Survey (USGS) scientists are in the final year of a research project initiated in the fall of 2001 to increase understanding of relations between crustal evolution, fluid flow, and ore deposits in the Great Basin. Because of its substantial past and current mineral production, this region has been the focus of numerous investigations over the past century and is the site of ongoing research by industry, academia, and state agencies. A variety of geoinformatic tools was used to organize, reinterpret, and display, in space and time, the large amounts of geologic, geophysical, geochemical, and hydrologic information deemed pertinent to this problem. This information, in combination with concentrated research on (1) critical aspects of the geologic history, (2) an area in northern Nevada that encompasses the major mineral belts, and (3) important mining districts and deposits, is producing new insights about the interplay between key tectonic events, hydrothermal fluid flow, and ore genesis in mineral belts. The results suggest that the Archean to Holocene history of the Great Basin was punctuated by several tectonic events that caused fluids of different origins (sea water, basinal brine, meteoric water, metamorphic water, magmatic water) to move through the crust. Basement faults reactivated during these events localized deformation, sedimentation, magmatism, and hydrothermal fluid flow in overlying rocks to form mineral belts that contain ore deposits of different types and ages that are locally superimposed (demonstrating inheritance). Fluid flow in these systems also was influenced by the distribution of permeable lithologies and paleotopographic highs and lows. Hydrothermal fluids evolved from their initial chemistries towards compositions that reflect the ƒ O 2 and ƒ S 2 buffering capacity of, and the ligands and metals present in, the rocks (±older mineralization) through which they moved. In northern Nevada, where gold deposits are relatively common, carbonaceous, pyritic strata buffered fluids of diverse origins to H 2 S-rich compositions so they could transport gold repeatedly over Paleozoic-Cenozoic time (convergent evolution). Ore formed where metal-laden fluids encountered effective physicochemical traps. Maps of Neogene basin fill and erosion surfaces identify areas where preexisting ore deposits have been progressively exposed or concealed. Comparisons with analogous terrains and deposit types in other parts of the world provide global context. The initial findings and some of the databases, geologic maps, sections, reconstructions, hydrogeologic models, topical syntheses, regional overviews, short courses, field guides, and deposit comparisons produced by project staff and associated managers, contractors, and collaborators have been presented in numerous abstracts, symposia, USGS publications, and professional journals over the last 5 years (see the extensive bibliography). Notable among these was the 2005 Geological Society of Nevada symposium in Reno, Nevada, and the 2005 Geological Society of America annual meeting in Salt Lake City, Utah, where project results were presented to audiences from around the nation and world. The final results of the project will be submitted for publication in 2007 to appropriate USGS and professional journals. A special issue of GEOSPHERE, scheduled for publication in 2007, will be devoted to the results of this project and related work. This special issue will reach an international audience and be available worldwide on the internet. Much of the research for this project has concentrated on areas that will receive the focused attention of the mining industry in the future. As such, the data and interpretations generated by this project have direct use for land-use managers in Federal, State, and local agencies. Improved hydrogeologic models developed by this project will considerably enhance ongoing and future water resource investigations in the region. The increased understanding of when, where, and how hydrothermal systems produce significant economic deposits has direct uses for mineral exploration and for future USGS mineral resource assessments in the Great Basin and other parts of the world.

Great Basin↗

Recovery and validation of historical sediment quality data from coastal and estuarine areas: An integrated approach

A comprehensive database of sediment chemistry and environmental parameters has been compiled for Boston Harbor and Massachusetts Bay. This work illustrates methodologies for rescuing and validating sediment data from heterogeneous historical sources. It greatly expands spatial and temporal data coverage of estuarine and coastal sediments. The database contains about 3500 samples containing inorganic chemical, organic, texture and other environmental data dating from 1955 to 1994. Cooperation with local and federal agencies as well as universities was essential in locating and screening documents for the database. More than 80% of references utilized came from sources with limited distribution (gray literature). Task sharing was facilitated by a comprehensive and clearly defined data dictionary for sediments. It also served as a data entry template and flat file format for data processing and as a basis for interpretation and graphical illustration. Standard QA/QC protocols are usually inapplicable to historical sediment data. In this work outliers and data quality problems were identified by batch screening techniques that also provide visualizations of data relationships and geochemical affinities. No data were excluded, but qualifying comments warn users of problem data. For Boston Harbor, the proportion of irreparable or seriously questioned data was remarkably small (<5%), although concentration values for metals and organic contaminants spanned 3 orders of magnitude for many elements or compounds. Data from the historical database provide alternatives to dated cores for measuring changes in surficial sediment contamination level with time. The data indicate that spatial inhomogeneity in harbor environments can be large with respect to sediment-hosted contaminants. Boston Inner Harbor surficial sediments showed decreases in concentrations of Cu, Hg, and Zn of 40 to 60% over a 17-year period.A comprehensive database of sediment chemistry and environmental parameters has been compiled for Boston Harbor and Massachusetts Bay. This work illustrates methodologies for rescuing and validating sediment data from heterogeneous historical sources. It greatly expands spatial and temporal data coverage of estuarine and coastal sediments. The database contains about 3500 samples containing inorganic chemical, organic, texture and other environmental data dating from 1995 to 1994. Cooperation with local and federal agencies as well as universities was essential in locating and screening documents for the database. More than 80% of references utilized came from sources with limited distribution (gray Task sharing was facilitated by a comprehensive and clearly defined data dictionary for sediments. It also served as a data entry template and flat file format for data processing and as a basis for interpretation and graphical illustration. Standard QA/QC protocols are usually inapplicable to historical sediment data. In this work outliers and data quality problems were identified by batch screening techniques that also provide visualizations of data relationships and geochemical affinities. No data were excluded, but qualifying comments warn users of problem data. For Boston Harbor, the proportion of irreparable or seriously questioned data was remarkably small (<5%), although concentration values for metals and organic contaminants spanned 3 orders of magnitude for many elements or compounds. Data from the historical database provide alternatives to dated cores for measuring changes in surficial sediment contamination level with time. The data indicate that spatial inhomogeneity in harbor environments can be large with respect to sediment-hosted contaminants. Boston Inner Harbor surficial sediments showed decreases in concentrations Cu, Hg, and Zn of 40 to 60% over a 17-year period.

Massachusetts↗

Variations in pesticide leaching related to land use, pesticide properties, and unsaturated zone thickness

Pesticide leaching through variably thick soils beneath agricultural fields in Morgan Creek, Maryland was simulated for water years 1995 to 2004 using LEACHM (Leaching Estimation and Chemistry Model). Fifteen individual models were constructed to simulate five depths and three crop rotations with associated pesticide applications. Unsaturated zone thickness averaged 4.7 m but reached a maximum of 18.7 m. Average annual recharge to ground water decreased from 15.9 to 11.1 cm as the unsaturated zone increased in thickness from 1 to 10 m. These point estimates of recharge are at the lower end of previously published values, which used methods that integrate over larger areas capturing focused recharge in the numerous detention ponds in the watershed. The total amount of applied and leached masses for five parent pesticide compounds and seven metabolites were estimated for the 32-km 2 Morgan Creek watershed by associating each hectare to the closest one-dimensional model analog of model depth and crop rotation scenario as determined from land-use surveys. LEACHM parameters were set such that branched, serial, first-order decay of pesticides and metabolites was realistically simulated. Leaching is predicted to be greatest for shallow soils and for persistent compounds with low sorptivity. Based on simulation results, percent parent compounds leached within the watershed can be described by a regression model of the form e &minus;depth ( a ln t &frac12; &minus;b ln K OC ) where t 1/2 is the degradation half-life in aerobic soils, K OC is the organic carbon normalized sorption coefficient, and a and b are fitted coefficients ( R 2 = 0.86, p value = 7 &times; 10 &minus;9 ).

Journal of Environmental Quality↗

Nitrite fixation by humic substances: Nitrogen-15 nuclear magnetic resonance evidence for potential intermediates in chemodenitrification

Studies have suggested that NO − 2 , produced during nitrification and denitrification, can become incorporated into soil organic matter and, in one of the processes associated with chemodenitrification, react with organic matter to form trace N gases, including N 2 O. To gain an understanding of the nitrosation chemistry on a molecular level, soil and aquatic humic substances were reacted with 15 N-labeled NaNO 2 , and analyzed by liquid phase 15 N and 13 C nuclear magnetic resonance (NMR). The International Humic Substances Society (IHSS) Pahokee peat and peat humic acid were also reacted with Na 15 NO 2 and analyzed by solid-state 15 N NMR. In Suwannee River, Armadale, and Laurentian fulvic acids, phenolic rings and activated methylene groups underwent nitrosation to form nitrosophenols (quinone monoximes) and ketoximes, respectively. The oximes underwent Beckmann rearrangements to 2° amides, and Beckmann fragmentations to nitriles. The nitriles in turn underwent hydrolysis to 1° amides. Peaks tentatively identified as imine, indophenol, or azoxybenzene nitrogens were clearly present in spectra of samples nitrosated at pH 6 but diminished at pH 3. The 15 N NMR spectrum of the peat humic acid exhibited peaks corresponding with N-nitroso groups in addition to nitrosophenols, ketoximes, and secondary Beckmann reaction products. Formation of N-nitroso groups was more significant in the whole peat compared with the peat humic acid. Carbon-13 NMR analyses also indicated the occurrence of nitrosative demethoxylation in peat and soil humic acids. Reaction of 15 N-NH 3 fixated fulvic acid with unlabeled NO − 2 resulted in nitrosative deamination of aminohydroquinone N, suggesting a previously unrecognized pathway for production of N 2 gas in soils fertilized with NH 3

Soil Science Society of America Journal↗

Tile drainage as karst: Conduit flow and diffuse flow in a tile-drained watershed

The similarity of tiled-drained watersheds to karst drainage basins can be used to improve understanding of watershed-scale nutrient losses from subsurface tile drainage networks. In this study, short-term variations in discharge and chemistry were examined from a tile outlet collecting subsurface tile flow from a 963 ha agricultural watershed. Study objectives were to apply analytical techniques from karst springs to tile discharge to evaluate water sources and estimate the loads of agricultural pollutants discharged from the tile with conduit, intermediate and diffuse flow regimes. A two-member mixing model using nitrate, chloride and specific conductance was used to distinguish rainwater versus groundwater inputs. Results indicated that groundwater comprised 75% of the discharge for a three-day storm period and rainwater was primarily concentrated during the hydrograph peak. A contrasting pattern of solute concentrations and export loads was observed in tile flow. During base flow periods, tile flow consisted of diffuse flow from groundwater sources and contained elevated levels of nitrate, chloride and specific conductance. During storm events, suspended solids and pollutants adhered to soil surfaces (phosphorus, ammonium and organic nitrogen) were concentrated and discharged during the rapid, conduit flow portion of the hydrograph. During a three-day period, conduit flow occurred for 5.6% of the time but accounted for 16.5% of the total flow. Nitrate and chloride were delivered primarily with diffuse flow (more than 70%), whereas 80-94% of total suspended sediment, phosphorus and ammonium were exported with conduit and intermediate flow regimes. Understanding the water sources contributing to tile drainage and the manner by which pollutant discharge occurs from these systems (conduit, intermediate or diffuse flow) may be useful for designing, implementing and evaluating non-point source reduction strategies in tile-drained landscapes. ?? 2007 Elsevier B.V. All rights reserved.

Journal of Hydrology↗

Relationships between water and gas chemistry in mature coalbed methane reservoirs of the Black Warrior Basin

Water and gas chemistry in coalbed methane reservoirs of the Black Warrior Basin reflects a complex interplay among burial processes, basin hydrodynamics, thermogenesis, and late-stage microbial methanogenesis. These factors are all important considerations for developing production and water management strategies. Produced water ranges from nearly potable sodium-bicarbonate water to hypersaline sodium-chloride brine. The hydrodynamic framework of the basin is dominated by structurally controlled fresh-water plumes that formed by meteoric recharge along the southeastern margin of the basin. The produced water contains significant quantities of hydrocarbons and nitrogen compounds, and the produced gas appears to be of mixed thermogenic-biogenic origin. Late-stage microbial methanogenesis began following unroofing of the basin, and stable isotopes in the produced gas and in mineral cements indicate that late-stage methanogenesis occurred along a CO 2 -reduction metabolic pathway. Hydrocarbons, as well as small amounts of nitrate in the formation water, probably helped nourish the microbial consortia, which were apparently active in fresh to hypersaline water. The produced water contains NH 4 + and NH 3 , which correlate strongly with brine concentration and are interpreted to be derived from silicate minerals. Denitrification reactions may have generated some N 2 , which is the only major impurity in the coalbed gas. Carbon dioxide is a minor component of the produced gas, but significant quantities are dissolved in the formation water. Degradation of organic compounds, augmented by deionization of NH 4 + , may have been the principal sources of hydrogen facilitating late-stage CO 2 reduction.

Alabama↗

Environmental presence and persistence of pharmaceuticals: An overview

Emerging contaminants (ECs) in the environment &ndash; that is, chemicals with domestic, municipal, industrial, or agricultural sources that are not commonly monitored but may have the potential for adverse environmental effects &ndash; is a rapidly growing field of research. The use of &ldquo;emerging&rdquo; is not intended to infer that the presence of these compounds in the environment is new. These chemicals have been released into the environment as long as they have been in production or, in the case of hormones and other endogenous compounds, since the rise of animal life. What is emerging is the interest by the scientific and lay communities in the presence of these chemicals in the environment, the analytical capabilities required for detection, and the subtle effects that very small concentrations of these chemicals appear to have on aquatic biota. In December 2006, Environmental Science & Technology devoted an entire special issue (volume 40, number 23) to the topic of ECs, illustrating the increased interest in the subject. Within the EGs, one particular class that has seen a substantial increase in research over the past 10 years is pharmaceuticals and personal-care products (PPCPs). This increased research interest can be demonstrated by several means, including requests for proposals from funding agencies, but the clearest indication of a focused effort to understand the introduction, transformation, and potential health and environmental effects of PPCPs and ECs, in general, is the number of published reports. This increase can be shown by examining six environmental journals that regularly publish PPCP-related papers &ndash; Chemosphere , Environmental Science & Technology , Environmental Toxicology and Chemistry , Science of the Total Environment , Water Research , and Water Science and Technology . In 1998 there were 22 papers published on pharmaceuticals, antibiotics, or drugs in these 6 journals; by 2006, this number increased sixfold to 132 papers (Figure 1.1). This growth can be attributed to a number of factors. The presence of pharmaceuticals in surface-water samples from Europe and the United States was documented in several sentinel papers. These ground-breaking works encouraged other scientists to examine the rivers, streams, lakes, and reservoirs in their regions for such chemicals. In addition, the intense public attention paid to news reports on the environmental detections of these chemicals and possible effects of aquatic life has made this issue visible to the wastewater-treatment, drinking-water treatment, and regulatory communities. This has driven the funding bodies associated with these communities to fund studies or request proposals that address the presence, fate, and effects of PPCPs in aquatic systems. The release of the first comprehensive reconnaissance of pharmaceuticals and other wastewater contaminants in the United States provides an example of the intense media interest in this topic. Within 6 days on online publication of this study, 72 newspapers across the United States had published articles describing the results, either locally written or based on international media syndicate reports. There also was substantial concurrent coverage by local and national radio and television outlets, including the Cable News Network, ABC World News Tonight , and National Public Radio. A substantial fraction of these news stories may be attributable to press releases and media briefings prior to publication. However, the interest by television and print journalists in reporting the results of a peer-reviewed journal article to the general public was motivated by the recognition that describing the presence of PPCPs in water supplies would be of interest to the public. To better convey the results of the study published by Koplin et al. to the public, a separate general-interest fact sheet was published to summarize the important points of the study. Because PPCPs are commonly and widely used by individuals, there is likely a preexisting, personal identification with these compounds that does not occur for the wide range of other organic and inorganic contaminants whose presence in the environment has previously been described. This greater public &ldquo;name recognition&rdquo; makes itself known through the media to the regulatory and technical community and has prompted interest in sponsoring research that defines the composition and concentrations of PPCPs in potential sources and their fate and effects following relase into the environment. Independent of the drivers that potentially fuel the interest in studies of PPCPs, it is clear that PPCP research has grown beyond surface-water studies to examine issues such as: &bull; Presence in other matrices, such as groundwater, landfill leachates, sediments, and biosolids. &bull; Environmental transport and fate in surface water, groundwater, and soils amended with reclaimed water or biosolids. &bull; PPCP source elucidation, such as wastewater treatment plant (WWTP) effluents, confined animal feeding operations (CAFOs), and aquaculture. &bull; Removal during wastewater and drinking-water treatment. &bull; Effects on aquatic ecosystems, terrestrial ecosystems, and human health. The chapters in this book provide an extensive examination of current environmental pharmaceutical research and are divided into three sections: &ldquo;Occurrence and Analysis of Pharmaceuticals in the Environment,&rdquo; &ldquo;Environment Fate and Transformations of Veterinary Pharmaceuticals,&rdquo; and &ldquo;treatment of Pharmaceuticals in Drinking Water and Wastewater.&rdquo; The purpose of this introductory overview chapter is to outline current (2004-2006) knowledge about the presence and concentration of PPCPs as described in the published literature. Previous reviews should be consulted for discussions on pre-2004 publications. Those reviews will provide the reader with a comprehensive introduction to the topic of PPCPs in the environment. This chapter describes the sources of PPCPs and other organic contaminants often associated with human wastewater into the environment, the range of concentrations present in various environmental compartments, and the potential routes of removal/sequestration. An overview of the sources and fate of veterinary pharmaceuticals will be discussed in Chapter 5, &ldquo;Fate and Transport of Veterinary Medicines in the Soil Environment.&rdquo;

Book chapter↗

Direct-push geochemical profiling for assessment of inorganic chemical heterogeneity in aquifers

Discrete-depth sampling of inorganic groundwater chemistry is essential for a variety of site characterization activities. Although the mobility and rapid sampling capabilities of direct-push techniques have led to their widespread use for evaluating the distribution of organic contaminants, complementary methods for the characterization of spatial variations in geochemical conditions have not been developed. In this study, a direct-push-based approach for high-resolution inorganic chemical profiling was developed at a site where sharp chemical contrasts and iron-reducing conditions had previously been observed. Existing multilevel samplers (MLSs) that span a fining-upward alluvial sequence were used for comparison with the direct-push profiling. Chemical profiles obtained with a conventional direct-push exposed-screen sampler differed from those obtained with an adjacent MLS because of sampler reactivity and mixing with water from previous sampling levels. The sampler was modified by replacing steel sampling components with stainless-steel and heat-treated parts, and adding an adapter that prevents mixing. Profiles obtained with the modified approach were in excellent agreement with those obtained from an adjacent MLS for all constituents and parameters monitored (Cl, NO3, Fe, Mn, DO, ORP, specific conductance and pH). Interpretations of site redox conditions based on field-measured parameters were supported by laboratory analysis of dissolved Fe. The discrete-depth capability of this approach allows inorganic chemical variations to be described at a level of detail that has rarely been possible. When combined with the mobility afforded by direct-push rigs and on-site methods of chemical analysis, the new approach is well suited for a variety of interactive site-characterization endeavors. ?? 2003 Elsevier B.V. All rights reserved.

Journal of Contaminant Hydrology↗

Chemistry and origin of minor and trace elements in vitrinite concentrates from a rank series from the eastern United States, England, and Australia

A rank series consisting of twelve vitrinite concentrates and companion whole-coal samples from mined coal beds in the eastern United States, England, and Australia were analyzed for C, H, N, O, ash, and 47 trace and minor elements by standard elemental, instrumental neutron activation analysis (INAA), and direct-current-arc spectrographic (DCAS) techniques. The reflectance of vitrinite, atomic H:C and O:C, and ash-free carbon data were used to determine ranks that range from high-volatile C bituminous coal to meta-anthracite. A van Krevelen (atomic H:C vs. O:C) diagram of the vitrinite concentrates shows a smooth curve having its lowest point at H:C = 0.18 and O:C = 0.01. This improves the van Krevelen diagram by the addition of our vitrinite concentrate from meta-anthracite from the Narragansett basin of New England. Boron content (400–450 ppm) in two Illinois basin vitrinite concentrates was about an order of magnitude higher than B contents in other concentrates analyzed. We attribute this to marine origin or hydrothermal activity. The alkaline-earth elements Ca, Mg and Ba (DCAS) have higher concentrations in our vitrinite concentrates from bituminous coals of the Appalachian basin, than they do in vitrinite concentrates from the marine-roofed bituminous coals of the Illinois basin; therefore, a nonmarine origin for these alkaline-earth elements is postulated for the Appalachian basin coals. An ion-exchange mechanism due to high concentrations of these elements as ions in diagenetic water, but probably not recent ground water, may be responsible for the relatively high values of these elements in Appalachian concentrates. Higher concentrations of Ni and Cr in one of the English vitrinite concentrates and of Zr in the Australian concentrate probably indicate organic association and detrital influence, respectively.

International Journal of Coal Geology↗

Emissions of carbon dioxide and methane from a headwater stream network of interior Alaska

Boreal ecosystems store significant quantities of organic carbon (C) that may be vulnerable to degradation as a result of a warming climate. Despite their limited coverage on the landscape, streams play a significant role in the processing, gaseous emission, and downstream export of C, and small streams are thought to be particularly important because of their close connection with the surrounding landscape. However, ecosystem carbon studies do not commonly incorporate the role of the aquatic conduit. We measured carbon dioxide (CO 2 ) and methane (CH 4 ) concentrations and emissions in a headwater stream network of interior Alaska underlain by permafrost to assess the potential role of stream gas emissions in the regional carbon balance. First-order streams exhibited the greatest variability in fluxes of CO 2 and CH 4, and the greatest mean p CO 2 . High-resolution time series of stream p CO 2 and discharge at two locations on one first-order stream showed opposing p CO 2 responses to storm events, indicating the importance of hydrologic flowpaths connecting CO 2 -rich soils with surface waters. Repeated longitudinal surveys on the stream showed consistent areas of elevated p CO 2 and p CH 4 , indicative of discrete hydrologic flowpaths delivering soil water and groundwater having varying chemistry. Up-scaled basin estimates of stream gas emissions suggest that streams may contribute significantly to catchment-wide CH 4 emissions. Overall, our results indicate that while stream-specific gas emission rates are disproportionately high relative to the terrestrial landscape, both stream surface area and catchment normalized emission rates were lower than those documented for the Yukon River Basin as a whole. This may be due to limitations of C sources and/or C transport to surface waters.

Journal of Geophysical Research G: Biogeosciences↗

Assessing water quality suitability for shortnose sturgeon in the Roanoke River, North Carolina, USA with an in situ bioassay approach

The aim of this study was to determine the suitability of water quality in the Roanoke River of North Carolina for supporting shortnose sturgeon Acipenser brevirostrum, an endangered species in the United States. Fathead minnows Pimephales promelas were also evaluated alongside the sturgeon as a comparative species to measure potential differences in fish survival, growth, contaminant accumulation, and histopathology in a 28-day in situ toxicity test. Captively propagated juvenile shortnose sturgeon (total length 49 ± 8mm, mean ±SD) and fathead minnows (total length 39 ± 3mm, mean ± SD) were used in the test and their outcomes were compared to simultaneous measurements of water quality (temperature, dissolved oxygen, pH, conductivity, total ammonia nitrogen, hardness, alkalinity, turbidity) and contaminant chemistry (metals, polycyclic aromatic hydrocarbons, organochlorine pesticides, current use pesticides, polychlorinated biphenyls) in river water and sediment. In the in situ test, there were three non-riverine control sites and eight riverine test sites with three replicate cages (25 X 15-cm (OD) clear plexiglass with 200-lm tear-resistant Nitex screen over each end) of 20 shortnose sturgeon per cage at each site. There was a single cage of fathead minnows also deployed at each site alongside the sturgeon cages. Survival of caged shortnose sturgeon among the riverine sites averaged 9% (range 1.7-25%) on day 22 of the 28-day study, whereas sturgeon survival at the non-riverine control sites averaged 64% (range 33-98%). In contrast to sturgeon, only one riverine deployed fathead minnow died (average 99.4% survival) over the 28-day test period and none of the control fathead minnows died. Although chemical analyses revealed the presence of retene (7-isopropyl-1-methylphenanthrene), a pulp and paper mill derived compound with known dioxin-like toxicity to early life stages of fish, in significant quantities in the water (251-603ngL-1) and sediment (up to 5000ngg-1 dry weight) at several river sites, no correlation was detected of adverse water quality conditions or measured contaminant concentrations to the poor survival of sturgeon among riverine test sites. Histopathology analysis determined that the mortality of the river deployed shortnose sturgeon was likely due to liver and kidney lesions from an unknown agent(s). Given the poor survival of shortnose sturgeon (9%) and high survival of fathead minnows (99.4%) at the riverine test sites, our study indicates that conditions in the Roanoke River are incongruous with the needs of juvenile shortnose sturgeon and that fathead minnows, commonly used standard toxicity test organisms, do not adequately predict the sensitivity of shortnose sturgeon. Therefore, additional research is needed to help identify specific limiting factors and management actions for the enhancement and recovery of this imperiled fish species.

North Carolina↗

Identification of a novel arsenite oxidase gene, arxA, in the haloalkaliphilic, arsenite-oxidizing bacterium alkalilimnicola ehrlichii strain MLHE-1

Although arsenic is highly toxic to most organisms, certain prokaryotes are known to grow on and respire toxic metalloids of arsenic (i.e., arsenate and arsenite). Two enzymes are known to be required for this arsenic-based metabolism: (i) the arsenate respiratory reductase (ArrA) and (ii) arsenite oxidase (AoxB). Both catalytic enzymes contain molybdopterin cofactors and form distinct phylogenetic clades (ArrA and AoxB) within the dimethyl sulfoxide (DMSO) reductase family of enzymes. Here we report on the genetic identification of a “new” type of arsenite oxidase that fills a phylogenetic gap between the ArrA and AoxB clades of arsenic metabolic enzymes. This “new” arsenite oxidase is referred to as ArxA and was identified in the genome sequence of the Mono Lake isolate Alkalilimnicola ehrlichii MLHE-1, a chemolithoautotroph that can couple arsenite oxidation to nitrate reduction. A genetic system was developed for MLHE-1 and used to show that arxA (gene locus ID mlg _ 0216 ) was required for chemoautotrophic arsenite oxidation. Transcription analysis also showed that mlg _ 0216 was only expressed under anaerobic conditions in the presence of arsenite. The mlg _ 0216 gene is referred to as arxA because of its greater homology to arrA relative to aoxB and previous reports that implicated Mlg_0216 (ArxA) of MLHE-1 in reversible arsenite oxidation and arsenate reduction in vitro . Our results and past observations support the position that ArxA is a distinct clade within the DMSO reductase family of proteins. These results raise further questions about the evolutionary relationships between arsenite oxidases (AoxB) and arsenate respiratory reductases (ArrA). Arsenic is toxic to most organisms and is known to cause cancer in humans. However, bacteria have adapted several biotransformation pathways that function to either couple the reduction or oxidation of arsenicals to energy conservation and growth (1). The enzymologies of these two pathways have several features in common. The arsenate respiratory reductase (ArrAB) and arsenite oxidase (AoxAB) enzymes are usually composed of at least two subunits, a small iron-sulfur cluster-containing subunit (ArrB and AoxA) and a larger molybdopterin-containing catalytic subunit (ArrA and AoxB). Although they catalyze arsenic redox chemistry, ArrA and AoxB form distinct phylogenetic clades within the dimethyl sulfoxide (DMSO) reductase family of molybdenum-containing enzymes (16, 24). Culture-dependent approaches have resulted in the isolation of a variety of diverse bacteria that metabolize arsenic (reviewed in reference 26). Many of these isolates have had their genomes sequenced, which has been insightful for understanding the composition and diversity of arr and aox gene clusters. In the arsenite-oxidizing nitrate reducer Alkalilimnicola ehrlichii strain MLHE-1 (a haloalkaliphile isolated from Mono Lake [CA]) (10, 15), bioinformatic analysis of its genome revealed the absence of genes homologous to the arsenite oxidase genes of the aoxB type. Instead, two genes ( mlg _ 0216 and mlg _ 2426 ) were identified that better resembled the catalytic subunit of the arsenate respiratory reductase (20); however, MLHE-1 has not been shown to respire (or reduce) arsenate (15). Recent work by Richey et al. (20) showed that the Mlg_0216 protein (and not Mlg_2426) was expressed under chemolithoautotrophic (10 mM arsenite and 10 mM nitrate) growth conditions. Moreover, it was shown that Mlg_0216 exhibits both arsenate reductase and arsenite oxidase activities in vitro . These observations raised the question, is the mlg _ 0216 gene required for arsenite oxidation in vivo ? In this report, we addressed this question by developing a genetic system in MLHE-1, generating strains with mutations in mlg _ 0216 and mlg _ 2426 , and physiologically characterizing the resulting strains. Our results implicate mlg _ 0216 in chemolithoautotrophic arsenite oxidation coupled to nitrate respiration.

Journal of Bacteriology↗

Ferromanganese deposits from the Gulf of Alaska Seamount Province: Mineralogy, chemistry, and origin

Ferromanganese-oxide deposits dredged from four seamounts (Welker, Miller, Murray, and Patton) in the Gulf of Alaska Seamount Province include poorly crystallized microlaminated crusts on basalt substrate, well-crystallized Mn-oxide veins in epiclastic sedimentary rocks, and crystalline Mn-oxide layers and micronodules in phosphorite. The principal rock types dredged are alkali-basalt pillow fragments and tuffaceous conglomerate and sandstone. The glassy rims of pillow fragments, the glassy goundmass of large volcanic clasts, and the tuffaceous component of the sediment are altered to palagonite. Other low-temperature alteration products include phillipsite, smectite, and carbonate-apatite.Thick (10–50 mm) Fe–Mn crusts consist mainly of δ-MnO 2 ; straight and cuspate growth laminae indicate variable growth rates and periods of nondeposition. A larger number of detrital particles toward the top of thick crusts record the increasing influence of active volcanoes of the Aleutian arc during northwestward movement of the Pacific plate. Thick crusts on basalt substrate have higher Mn/Fe ratios and lower Co content than Fe–Mn crusts from low-latitude seamounts of the central Pacific region. Thin (< 10 mm) crusts on volcaniclastic substrate contain todorokite and birnessite and have higher Mn/Fe ratios, Ni, and Cu and lower Fe and Co than thick Gulf of Alaska crusts.Veins of todorokite and cryptomelane with complex internal structure occur in altered tuffaceous sandstone and conglomerate from Miller Seamount. Fibrous todorokite has a composition similar to those of other marine examples but may contain up to 7% Mn 2+ in M2 sites. Microprobe analysis of the marine cryptomelane indicates a composition that is approximately (K,Ba) 1–2 (Mn 4+ ,Co) 7–8 O 16 ∙ x (H 2 O).A third type of Fe–Mn deposit in phosphorite is an intimate mixture of todorokite (and minor δ-MnO 2 )-bearing layers and micronodules, carbonate-apatite, and phillipsite that encloses grains of altered volcanic glass and lithic fragments.The microlaminated structure, mineralogy (predominantly δ-MnO 2 ), and composition (Mn/Fe ratio and transition metal, rare earth element, U, and Th contents) of the thick crusts are characteristic of hydrogenetic Fe–Mn crusts elsewhere in the Pacific. Conversely, the crystallinity and chemical composition of the Mn-oxide veins and thin crusts indicate formation during diagenesis of the volcanogenic sediment substrate. Mn and other transition metals are mobilized during low-temperature oxidative alteration (palagonitization) of basaltic volcanic glass; the oxidation of Fe 2+ to Fe 3+ during palagonitization and the dissolution of the dilute biogenic fraction of the sediment combine to lower the Eh of ambient pore fluid and enhance the mobility of Mn 2+ . Diagenesis in the phosphatic sandstone from Patton Seamount involves organic-rich sediment and pore waters elevated in phosphorus owing to upwelling above a large volcanic edifice.

Alaska↗

The geology, botany and chemistry of selected peat-forming environments from temperate and tropical latitudes

Peat has been studied in several geologic settings: (1) glaciated terrain in cold temperate Maine and Minnesota, U.S.A.; (2) an island in the Atlantic Ocean off the coast of Maine, where sea level is rising; (3) the warm temperate U.S. Atlantic and Gulf Coastal Plains, where sea level has changed often; and (4) the tropical coast of Sarawak, Malaysia, and the tropical delta of the Batang Hari River, Sumatra, Indonesia. Most of these deposits are domed (ombrotrophic or partly ombrotrophic) bogs in which peat accumulation continued above the surface of the surrounding soil. However, the bogs of the U.S. Atlantic and Gulf Coastal Plains are comparatively not as domed, and many have almost level surfaces. In some bogs, aquatic or semi-aquatic plant materials accumulated, replaced water in the depressions, and formed a surface on which marsh or swamp vegetation could subsequently live, die, and accumulate. In others, the plant materials accumulated initially on level silt or sand surfaces supporting marshes or swamps. As the peat dome formed, plants growing on it changed from luxuriant ones near the base of the dome, where nutrients were brought into the bog by surface and ground water, to stunted ones at the top of the dome, where the raised bogs are fed by nutrient-poor precipitation. The physical and chemical changes that take place in the sequence of environments from the pond stage of deposit development, through the grassy marsh stage, through the forested swamp stage, and finally through the heath dome stage can be measured in terms of acidity and ash, volatile matter, carbon, hydrogen, nitrogen, sulfur and oxygen contents, as well as in the kind and distribution of trace elements. The organic and inorganic contents of the deposits relate to geomorphology, and geomorphology relates to their settings. As models of coal formation, some domed peat deposits may help in solving problems of distribution and character of ancient coal beds. But clearly not all peat deposits are precursors of coal. Most Holocene peat deposits are subject to destruction by erosion, fire and decomposition through microbial and chemical oxidation before burial. The best environments for coal precursors have biomass accumulation, a continuously rising water table within the mass, and minimum influx of clay and silt until preservation by burial. The most suitable settings for future economic coal deposits are domed bogs that accumulate thick, widespread peat having low ash and low sulfur contents. The ombrotrophic peat deposits of tropical Sarawak and Sumatra are thick and extensive, contain low-ash and low-sulfur peat, and have high heating values. They are considered to be the best tropical coal analogs because of their extent and chances of preservation; the base of the peat is below adjacent river levels, and chemical and structural conditions are favorable for accumulation.

International Journal of Coal Geology↗