Search USGSSearch

SEARCH · Search USGS

Results for “Journal of Environmental Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

The importance of environmental quality and catch potential to fishing site selection by freshwater anglers in Mississippi

We measured the importance of 24 fishing site attributes to Mississippi freshwater anglers. Factor analysis identified four multiattribute factors as important in the selection of fishing location: CLEAN ENVIRONMENT CATCH, COST AND HARVEST and AMENITIES AND SAFETY. In general, the importance of site selection factors differed little among anglers grouped by preferred type of fish, preferred fishing location (lakes and reservoirs, rivers and streams, ponds, or reservoir tailwaters), usual manner of fishing (engine-powered boat, nonpowered boat, or shore), or change in fishing frequency. COST AND HARVEST was more important to anglers with high harvest orientations. We found low correlations between site selection factor importance scores and angler age, fishing frequency, fishing expenditures, or fishing motivation factors. We suggest that the general lack of differences in site selection factors among angler groups indicates that management strategies to improve fishing site attributes should benefit all angler groups. Clean fishing environments and awareness of the availability of desired sport fishes were "very" or "extremely" important to fishing site selection by more than 70% of Mississippi freshwater anglers and should be priority management objectives.

North American Journal of Fisheries Management

Instream water use in the United States: water laws and methods for determining flow requirements

Water use generally is divided into two primary classes - offstream use and instream use. In offstream use, sometimes called out-of-stream or diversionary use, water is withdrawn (diverted) from a stream or aquifer and transported to the place of use. Examples are irrigated agriculture, municipal water supply, and industrial use. Each of these offstream uses, which decreases the volume of water available downstream from the point of diversion, is discussed in previous articles in this volume. Instream use, which generally does not diminish the flow downstream from its point of use, and its importance are described in this article. One of the earliest instream uses of water in the United States was to turn the water wheels that powered much of the Nation's industry in the 18th and 19th centuries. Although a small volume of water might have been diverted to a mill near streamside, that water usually was returned to the stream near the point of diversion and, thus, the flow was not diminished downstream from the mill. Over time, the generation of hydroelectric power replaced mill wheels as a means of converting water flow into energy. Since the 1920's, the generation of hydroelectric power increasingly has become a major instream use of water. By 1985, more than 3 billion acre-feet of water (3,050,000 million gallons per day) was used annually for hydropower generation (Solley and others, 1988, p. 45)-enough water to cover the State of Colorado to a depth of 51 feet. Navigation is another instream use with a long history. The Lewis and Clark expedition journals and many of Mark Twain's novels illustrate the extent to which the Nation originally depended on adequate streamfiows for basic transportation. Navigation in the 1980's is still considered to be an instream use; however, it often is based upon a stream system that has been modified greatly through channelization, diking, and construction of dams and locks. The present (1987) inland water navigation system in the conterminous United States consists of about 12,000 miles of maintained waterways, over which about 500 million tons of cargo is carried each year (U.S. Army Corps of Engineers, 1988, p. 16). Although not so widely practiced in recent years, streams have been used to dispose of raw waste products from homes, communities, and factories. This use has been discouraged by law and public policy because of public health concerns and the damage it causes to the environment. Beginning in the mid-1960's, other instream uses gained new prominence in the water-resources arena-the assertion of a legal right to a free-flowing stream for biological, recreational, and esthetic purposes. These uses themselves, however, are not new. Riverine habitat always has produced fish, and the beauty of flowing water always has evoked a strong sense of esthetic appreciation. What is new is the emerging legitimacy and awareness of these noneconomic uses under State and Federal laws and regulations. In the past, environmental uses of flowing water were ignored, for the most part, under a long-standing legal tradition that favored offstream uses and certain instream uses that had a strong economic basis. The history of instream-flow policy debate really concerns those recently recognized types of interim uses. Although the more transitional water uses have been protected by law, the recognition of other in stream uses has resulted in substantial changes in State water laws. Although methods for determining the volume of water needed for most traditional water uses are relatively straight-forward and well-established, methods for determining water requirements for the in stream uses have been developed only recently and are continuing to evolve. Water laws that have favored the more traditional water uses, the inherent nature of conflict between instream and offstream water uses, and the special kinds of technological and philosophical problems posed by the "newer" types of instream uses are described below. Water laws that have been passed to accommodate the more recently recognized instream uses are summarized.

Report

Section 5: Remote sensing of vegetation in the riparian corridor of the Colorado River’s delta 2013-2018

This remote sensing section is based on Nagler et al. (in preparation for the journal Hydrological Processes) and is a summary of the USGS preliminary findings to date. This report documents the changes in green foliage density (greenness) as measured by satellite vegetation index (VI) data and corresponding evapotranspiration (ET) in the riparian corridor of the Colorado River delta associated with the Minutes 319 and 323 environmental water deliveries using time-series data from 2013 through 2018. The report focuses on what happened only within the riparian corridor’s seven reaches since the 2014 flows, and despite being a continuation of measuring greenness and ET after the 2017 end of Minute 319, this study continued the tracking of these two variables, greenness and ET, in these original riparian corridor focal areas. Two spatial scales are used here: (1) Landsat satellite imagery at 30 m pixels and (2) the EOS-1 satellite sensor the Moderate Resolution Imaging Spectrometer (MODIS) with a resolution of 250 m pixels. The focal period includes 2013 (prepulse flow) and the years 2014-2018, with a focus on imagery collected from the Summer growing seasons 2014 through 2018 (one-year, pre-pulse and several post-pulse years, respectively). This report re-creates the 2013-2017 Landsat-based results from Jarchow et al. (2017a, b) by using the same region of interest (ROI). The report now provides revised and re-created results using all new imagery acquisition and processing techniques, as well as extraction code, created by the Vegetation Index and Phenology (VIP) Lab of the Biosystems Engineering Department of the University of Arizona (UofA). In 2018, methods employed by the VIP lab (and not ArcGIS) were used. ArcGIS was only used in the newly processed data to display the final difference maps. The entire spatial tile data from NASA was downloaded and processed at the VIP Lab using satellite imagery at two resolutions: 250 m MODIS and 30 m Landsat using three sensors, Landsat 5, Landsat 7 ETM+ and Landsat 8 Operational Land Imager (OLI), with added scenes for each year based on new clear atmosphere requirements. The VIP lab clipped the river boundary and seven riparian reaches from the previously existing ROI used in Jarchow et al. (2017 a, b) for the analyses done under Minute 319. The NASA image datasets for this riparian corridor ROI in seven reaches were re-processed to produce additional vegetation index (VI) information for years 2013 to 2018 for this report. At the same time, the report acquired and processed imagery from 2000- 2018 (data outside the scope of this report and data not shown here). The additional VIs (NDVI, scaled NDVI, EVI, EVI2) were analyzed so that new assessments of greenness and ET could be produced from the imagery datasets following methods in Nagler et al. (2013). These VI choices were based on previous performance comparisons between biophysical ground-based data and radiometric satellite-based data collected from this riparian ecosystem (Nagler et al., 2001) as well as performance related to ET estimation (Nagler et al., 2005a, b) and current advancements in VIs such as EVI2.

Colorado River Delta

Predicting seabed burial of cylinders by wave-induced scour: Application to the sandy inner shelf off Florida and Massachusetts

A simple parameterized model for wave-induced burial of mine-like cylinders as a function of grain-size, time-varying, wave orbital velocity and mine diameter was implemented and assessed against results from inert instrumented mines placed off the Indian Rocks Beach (IRB, FL), and off the Martha's Vineyard Coastal Observatory (MVCO, Edgartown, MA). The steady flow scour parameters provided by Whitehouse (1998) for self-settling cylinders worked well for predicting burial by depth below the ambient seabed for O (0.5 m) diameter mines in fine sand at both sites. By including or excluding scour pit infilling, a range of percent burial by surface area was predicted that was also consistent with observations. Rapid scour pit infilling was often seen at MVCO but never at IRB, suggesting that the environmental presence of fine sediment plays a key role in promoting infilling. Overprediction of mine scour in coarse sand was corrected by assuming a mine within a field of large ripples buries only until it generates no more turbulence than that produced by surrounding bedforms. The feasibility of using a regional wave model to predict mine burial in both hindcast and real-time forecast mode was tested using the National Oceanic and Atmospheric Administration (NOAA, Washington, DC) WaveWatch 3 (WW3) model. Hindcast waves were adequate for useful operational forcing of mine burial predictions, but five-day wave forecasts introduced large errors. This investigation was part of a larger effort to develop simple yet reliable predictions of mine burial suitable for addressing the operational needs of the U.S. Navy. ?? 2007 IEEE.

IEEE Journal of Oceanic Engineering

An on-campus well field for hydrogeophysics education and undergraduate research

The emerging subdiscipline of hydrogeophysics is underdeveloped in undergraduate curricula relative to its importance in professional engineering/environmental practice. In 2001, the Bucknell Department of Geology initiated efforts to refocus an undergraduate geophysics course on near-surface geophysical methods for hydrologic, environmental, and engineering problems. In addition to offering students practical experience, treatment of hydrogeophysics provides important pedagogical opportunities. Field-based hydrogeophysics labs challenge students to integrate concepts from other geology courses, as well as from physics, math, and chemistry. We faced two challenges in revising our geophysics course: (1) access to wells for field exercises on borehole geophysics; and (2) the costs of acquiring and maintaining equipment. We pursued two strategies to solve these problems. First, we established an on-campus well field, which serves as a field laboratory for downhole and cross-hole experiments. Second, we incorporated field demonstrations and lectures by professional geoscientists, including alumni, into our courses. By adding field exercises to our syllabi and promoting undergraduate research, we are building a cutting-edge dataset that includes televiewer and standard wellbore logging, cross-hole tomography, and hydraulic-test data. Student-led analysis of these data has already provided valuable insights into the control of fractures on aquifer properties, and these observations are being combined with outcrop studies to place our results in a more regional context.

Pennsylvania

Assessing factors affecting the thermal properties of a passive thermal refuge using three-dimensional hydrodynamic flow and transport modeling

Everglades restoration activities may cause changes to temperature and salinity stratification at the Port of the Islands (POI) marina, which could affect its suitability as a cold weather refuge for manatees. To better understand how the Picayune Strand Restoration Project (PSRP) may alter this important resource in Collier County in southwestern Florida, the USGS has developed a three-dimensional hydrodynamic model for the marina and canal system at POI. Empirical data suggest that manatees aggregate at the site during winter because of thermal inversions that provide warmer water near the bottom that appears to only occur in the presence of salinity stratification. To study these phenomena, the environmental fluid dynamics code simulator was used to represent temperature and salinity transport within POI. Boundary inputs were generated using a larger two-dimensional model constructed with the flow and transport in a linked overland-aquifer density-dependent system simulator. Model results for a representative winter period match observed trends in salinity and temperature fluctuations and produce temperature inversions similar to observed values. Modified boundary conditions, representing proposed PSRP alterations, were also tested to examine the possible effect on the salinity stratification and temperature inversion within POI. Results show that during some periods, salinity stratification is reduced resulting in a subsequent reduction in temperature inversion compared with the existing conditions simulation. This may have an effect on POI’s suitability as a passive thermal refuge for manatees and other temperature-sensitive species. Additional testing was completed to determine the important physical relationships affecting POI’s suitability as a refuge.

Florida

Application of a workflow to determine the feasibility of using simulated streamflow for estimation of streamflow frequency statistics

Streamflow records from hydrologic models are attractive for use in operational hydrology, such as a streamflow frequency analysis. The amount of bias inherent to simulated streamflow from hydrologic models is often unknown, but it is likely present in derivative products. Therefore, a workflow may help determine where streamflow frequency analysis is credibly feasible from simulated streamflow and allow for a systematic way to assess and correct for bias. The proposed workflow consists of hydrologically matching model output locations with streamflow-gauging station (stream gauge) locations, computing the desired statistic from the simulated and observed streamflow record, computing the differences between the simulated and observed statistic (i.e., the bias), and constructing generalized additive models (GAMs) from the differences to determine bias corrections. The US Geological Survey, in cooperation with the Gulf Coast Ecosystem Restoration Council and the US Environmental Protection Agency, is testing the proposed workflow on a low-streamflow frequency (LFF) analysis. Simulated streamflows for the LFF analysis were sourced from a machine-learning model that estimated daily streamflow at Level-12 hydrologic unit code (HUC12) pour points (outlets) in the southern and southeastern US for 1950–2010. The comparison data set consists of 497 stream gauges that are coincident with a HUC12 outlet. The simulated LFF statistics were being overestimated on average; thus, there are limits to using simulated streamflow for frequency analysis. The magnitude of the overprediction generally increases where no-flow conditions are common. Bias corrections determined from the GAMs decreased the magnitude of bias observed in the simulated LFF statistics on average, suggesting it is feasible to expand the operational use of simulated streamflows to frequency analyses with the proposed workflow. The proposed workflow could be advantageous to practitioners interested in leveraging existing and future simulated streamflow data sets with regional and or global coverage.

Journal of Hydrologic Engineering

Validation of a stream and riparian habitat assessment protocol using stream salamanders in the southwest Virginia coalfields

Within the central Appalachia Coalfields, the aquatic impacts of large-scale land uses, such as surface mining, are of particular ecological concern. Identification and quantification of land use impacts to aquatic ecosystems are a necessary first step to aid in mitigation of negative consequences to biota. However, quantifying physical environmental quality such as stream and riparian habitat often can be quite difficult, particularly when there is time or fiscal limitations. As such, standard protocols such as the U.S. EPA’s Stream Habitat Rapid Bioassessment Protocol have been established to be cost- and time-effective. This protocol estimates ten different stream and riparian conditions on a scale of 0 to 20. Unfortunately, using estimations can be problematic because of large potential variation in the scoring depending on differences in training, experience, and opinion of the personnel doing the estimations. In order to help negate these biases and provide a simplified process, the U.S. Army Corps of Engineers (USACE) developed a functional assessment for streams that measures 11 stream and riparian variables along with watershed land use to calculate three different scores, a hydrology score, biogeochemical score, and habitat score. In our study, we examined the correlation of stream salamander presence and abundance to the three USACE scores. In the summer of 2013, we visited 70 sites in the southwest Virginia Coalfields multiple times to collect salamanders and quantify stream and riparian microhabitat parameters. Using occupancy and abundance analyses, we found strong relationships among three Desmognathus spp. and the USACE Habitat FCI score. Accordingly, the Habitat FCI score provides a reasonable assessment of physical instream and riparian conditions that may serve as a surrogate for understanding the community composition and integrity of aquatic salamander in the region.

Virginia

A machine learning approach to identify barriers in stream networks demonstrates high prevalence of unmapped riverine dams

Restoring stream ecosystem integrity by removing unused or derelict dams has become a priority for watershed conservation globally. However, efforts to restore connectivity are constrained by the availability of accurate dam inventories which often overlook smaller unmapped riverine dams. Here we develop and test a machine learning approach to identify unmapped dams using a combination of publicly available topographic and geospatial habitat data. Specifically, we trained a random forest classification algorithm to identify unmapped dams using digitally engineered predictor variables and known dam sites for validation. We applied our algorithm to two subbasins in the Hudson River watershed, USA , and quantified connectivity impacts, as well as evaluated a range of predictor sets to examine tradeoffs between classification accuracy and model parameterization effort. The random forest classifier achieved high accuracy in predicting dam sites (true positive rate = 89%, false positive rate = 1.2%) using a subset of variables related to stream slope and presence of upstream lentic habitats. Unmapped dams were prevalent throughout the two test watersheds. In fact, existing dam inventories underestimated the true number of dams by ∼80–94%. Accounting for previously unmapped dams resulted in a 62–90% decrease in dendritic connectivity indices for migratory fishes. Unmapped dams may be pervasive and can dramatically bias stream connectivity information. However, we find that machine learning approaches can provide an accurate and scalable means of identifying unmapped dams that can guide efforts to develop accurate dam inventories, thereby informing and empowering efforts to better manage them.

New York

Estimated seepage rates from selected ditches, ponds, and lakes at the Camas National Wildlife Refuge, eastern Idaho

The Camas National Wildlife Refuge (Refuge) in eastern Idaho, established in 1937, contains wetlands, ponds, and wet meadows that are essential resting and feeding habitat for migratory birds and nesting habitat for waterfowl. Initially, natural sources of water supported these habitats. However, during the past few decades, changes in climate and surrounding land use have altered and reduced natural groundwater and surface-water inflows, resulting in a 5-meter decline in the water table and an earlier, and more frequent, occurrence of no flow in Camas Creek at the Refuge. Due to these changes in water availability, water management that includes extensive groundwater pumping is now necessary to maintain the wetlands, ponds, and wet meadows. These water management activities have proven to be inefficient and expensive, and the Refuge is seeking alternative water-management options that are more efficient and less expensive. More efficient water management at the Refuge may be possible through knowledge of the seepage rates from ditches, ponds, and lakes at the Refuge. With this knowledge, water-management efficiency may be improved by natural means through selective use of water bodies with the smallest seepage rates or through engineering efforts to minimize seepage losses from water bodies with the largest seepage rates. The U.S. Geological Survey performed field studies in 2015 and 2016 to estimate seepage rates for selected ditches, ponds, and lakes at the Refuge. Estimated seepage rates from ponds and lakes ranged over an order of magnitude, from 3.4 ± 0.2 to 103.0 ± 0.5 mm/d, with larger seepage rates calculated for Big Pond and Redhead Pond, intermediate seepage rates calculated for Two-way Pond, and smaller seepages rates calculated for the south arm of Sandhole Lake. Estimated seepage losses from two reaches of Main Diversion Ditch were 21 ± 2 and 17 ± 2 percent/km. These losses represent seepage rates of about 890 and 860 mm/d, which are one- to two-orders-of-magnitude larger than seepage rates from the ponds and lake. The depth-integrated vertical hydraulic conductivity ( K v ) for sediment underlying the ponds and lake was the primary control of seepage rates. The K v 's were 30 and 34 m/d for Big Pond, 14 and 18 m/d for Toomey Pond, 8 and 10 m/d for Two-way Pond, and 47 m/d for the north arm of Sandhole Lake.

Idaho

Dynamic selection of exposure time for turbulent flow measurements

The selection of optimum sampling configurations to measure the aspects of turbulent flow of water depends on the variable being measured, the applied measurement technique, the degree of environmental noise, and flow characteristics in and near the sampling location. This work presents a method to dynamically select the exposure time (SET) during the flow-velocity measurement at each sampling location on the basis of the moving block bootstrap (MBB) technique. The MBB enables near real-time estimation of the confidence intervals and, subsequently, the COV for turbulence parameters. The dynamic SET method has been tested in this work using time series of synthetic turbulent flow-velocity signals. This method was implemented using actual flow-velocity signals recorded with acoustic Doppler velocity (ADVs) instruments and acoustic Doppler current profilers (ADCPs). The results obtained from the implementation of the dynamic SET method show that the sampling time to achieve a defined uncertainty threshold is not the same for different turbulence parameters. Consequently, using the dynamic SET method, the exposure time can be optimized to obtain the turbulence parameters with the required uncertainty level. The dynamic SET method can be implemented in the instrument’s data logger to dynamically select the exposure time during flow measurements for a given uncertainty of the required turbulence parameter.

Journal of Hydraulic Engineering

Overview of SAX99: Environmental considerations

A 1-km2 area located 2 km off the Florida Pan-handle (30??22.6???N; 86??38.7???W) was selected as the site to conduct high-frequency acoustic seafloor penetration, sediment propagation, and bottom scattering experiments [1]. Side scan, multibeam, and normal incidence chirp acoustic surveys as well as subsequent video surveys, diver observations, and vibra coring, indicate a uniform distribution of surficial and subbottom seafloor characteristics within the area. The site, in 18-19 m of water, is characterized by 1-2-m thick fine-to-medium clean sand and meets the logistic and scientific requirements specified for the acoustic experiments. This paper provides a preliminary summary of the meteorological, oceanographic, and seafloor conditions found during the experiments and describes the important physical and biological process that control the spatial distribution and temporal changes in these characteristics.

IEEE Journal of Oceanic Engineering

On extracting sediment transport information from measurements of luminescence in river sediment

Accurately quantifying sediment transport rates in rivers remains an important goal for geomorphologists, hydraulic engineers, and environmental scientists. However, current techniques for measuring long-time scale (102–106 years) transport rates are laborious, and formulae to predict transport are notoriously inaccurate. Here we attempt to estimate sediment transport rates by using luminescence, a property of common sedimentary minerals that is used by the geoscience community for geochronology. This method is advantageous because of the ease of measurement on ubiquitous quartz and feldspar sand. We develop a model from first principles by using conservation of energy and sediment mass to explain the downstream pattern of luminescence in river channel sediment. We show that the model can accurately reproduce the luminescence observed in previously published field measurements from two rivers with very different sediment transport styles. The model demonstrates that the downstream pattern of river sand luminescence should show exponential-like decay in the headwaters which asymptotes to a constant value with further downstream distance. The parameters from the model can then be used to estimate the time-averaged virtual velocity, characteristic transport lengthscale, storage time scale, and floodplain exchange rate of fine sand-sized sediment in a fluvial system. The sediment transport values predicted from the luminescence method show a broader range than those reported in the literature, but the results are nonetheless encouraging and suggest that luminescence demonstrates potential as a sediment transport indicator. However, caution is warranted when applying the model as the complex nature of sediment transport can sometimes invalidate underlying simplifications.

Journal of Geophysical Research F: Earth Surface

Beach nourishment response and recent morphological evolution of Minnesota Point, Lake Superior

Beach nourishments are a popular nature-based alternative to armoring for shoreline erosion mitigation, but nourishments have been criticized due to their environmental impacts and uncertain sustainability. Monitoring is often nonexistent or insufficient to constrain nourishment longevity and inform the renourishment interval required to maintain shoreline protection. This study uses a combination of topobathymetric surveys, high-resolution satellite-derived shorelines, and coastal engineering analyses to investigate the recent evolution of Minnesota Point and the fate of three beach nourishments constructed adjacent to littoral barriers. We use semi-empirical formulations for sediment compatibility, wave runup, and longshore sediment transport to inform the observed nourishment behavior. Minnesota Point experienced widespread foredune retreat averaging 7±2.8 m from 2009–2019 and 130,000 (70,000–140,000) m 3 of sediment was eroded during this interval. The 2019 nourishment at the Superior Entry was rapidly eroded by strong storms, losing >80% of the added beach width by the following spring. The 2020 and 2021 nourishments at the Duluth Entry retained >80% of the nourishment material at the time of the last topobathymetric survey in the fall of 2022, and satellite-derived shorelines indicate that the beach remained 10 m wider than pre-nourishment conditions at the end of 2023. Modeled longshore transport rates over the period 2009–2022 averaged 11,400 m 3 yr −1 northwestward at the Superior Entry, nearly 3x greater than the 4000 m 3 yr −1 southeastward transport modeled at the Duluth Entry. These observations show that differences in shoreline orientation, littoral sediment supply, and grain size compatibility can lead to contrasting beach nourishment longevities, and this study provides additional measurements of Minnesota Point’s long-term morphological change which can help inform coastal resiliency efforts.

Minnesota, Wisconsin

An empirical approach to inversion of an unconventional helicopter electromagnetic dataset

A helicopter electromagnetic (HEM) survey acquired at the U.S. Idaho National Engineering and Environmental Laboratory (INEEL) used a modification of a traditional mining airborne method flown at low levels for detailed characterization of shallow waste sites. The low sensor height, used to increase resolution, invalidates standard assumptions used in processing HEM data. Although the survey design strategy was sound, traditional interpretation techniques, routinely used in industry, proved ineffective. Processed data and apparent resistivity maps were severely distorted, and hence unusable, due to low flight height effects, high magnetic permeability of the basalt host, and the conductive, three-dimensional nature of the waste site targets.To accommodate these interpretation challenges, we modified a one-dimensional inversion routine to include a linear term in the objective function that allows for the magnetic and three-dimensional electromagnetic responses in the in-phase data. Although somewhat ad hoc, the use of this term in the inverse routine, referred to as the shift factor, was successful in defining the waste sites and reducing noise due to the low flight height and magnetic characteristics of the host rock. Many inversion scenarios were applied to the data and careful analysis was necessary to determine the parameters appropriate for interpretation, hence the approach was empirical. Data from three areas were processed with this scheme to highlight different interpretational aspects of the method. Wastes sites were delineated with the shift terms in two of the areas, allowing for separation of the anthropomorphic targets from the natural one-dimensional host. In the third area, the estimated resistivity and the shift factor were used for geological mapping. The high magnetic content of the native soil enabled the mapping of disturbed soil with the shift term. Published by Elsevier Science B.V.

Journal of Applied Geophysics

PFAS remediation in a bioelectrochemical system inoculated with the west branch consortium (WBC-2)

Groundwater contamination by per - and polyfluoroalkyl substances (PFAS) poses a persistent environmental and public health concern. This study evaluates a two-chambered bioelectrochemical system (BES) inoculated with the West Branch Consortium (WBC-2) for PFAS remediation. Under an applied cathodic potential of −450 mV (versus Ag/AgCl), the BES with active WBC-2 achieved >99.0% perfluorooctanesulfonic acid (PFOS) removal within 21 days in deionized water with culture medium and > 98.9% removal of PFOS, perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA), and perfluorohexanesulfonic acid (PFHxS) in contaminated groundwater after 102 days. Intermediate formation (e.g., PFOA, 6:2 fluorotelomer sulfonate (6:2 FTS), perfluoropropionic acid (PFPrA), perfluorobutanoic acid (PFBA)) and background-corrected fluoride release were consistent with PFOS transformation under anaerobic reducing conditions potentially involving defluorination. Following repeated PFOS spikes (100 μg/L on Days 0, 50, and 399), PFOA, PFPrA, and PFBA accumulated over 664 days. Despite being the dominant accumulated compound, PFOA accounted for <1.8% of the total spiked PFOS mass. Minimal PFOS transformation occurred in controls without active WBC-2, highlighting the importance of microbial metabolism. Biofilm analysis revealed dense colonization of rod-shaped bacteria on carbon fiber brushes. Enrichment of Bacillus , Agrobacterium , and other low-abundance taxa suggests selective adaptation to BES and PFAS conditions. These findings highlight BES driven by electrochemically stimulated microbial activity as a promising strategy for PFAS remediation.

Journal of Water Process Engineering

Methane hydrates in nature - Current knowledge and challenges

Recognizing the importance of methane hydrate research and the need for a coordinated effort, the United States Congress enacted the Methane Hydrate Research and Development Act of 2000. At the same time, the Ministry of International Trade and Industry in Japan launched a research program to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. India, China, the Republic of Korea, and other nations also have established large methane hydrate research and development programs. Government-funded scientific research drilling expeditions and production test studies have provided a wealth of information on the occurrence of methane hydrates in nature. Numerous studies have shown that the amount of gas stored as methane hydrates in the world may exceed the volume of known organic carbon sources. However, methane hydrates represent both a scientific and technical challenge, and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of methane hydrates in nature, (2) assessing the volume of natural gas stored within various methane hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural methane hydrates, (5) analyzing the methane hydrate role as a geohazard, (6) establishing the means to detect and characterize methane hydrate accumulations using geologic and geophysical data, and (7) establishing the thermodynamic phase equilibrium properties of methane hydrates as a function of temperature, pressure, and gas composition. The U.S. Department of Energy (DOE) and the Consortium for Ocean Leadership (COL) combined their efforts in 2012 to assess the contributions that scientific drilling has made and could continue to make to advance our understanding of methane hydrates in nature. COL assembled a Methane Hydrate Project Science Team with members from academia, industry, and government. This Science Team worked with COL and DOE to develop and host the Methane Hydrate Community Workshop, which surveyed a substantial cross section of the methane hydrate research community for input on the most important research developments in our understanding of methane hydrates in nature and their potential role as an energy resource, a geohazard, and/or as an agent of global climate change. Our understanding of how methane hydrates occur in nature is still growing and evolving, and it is known with certainty that field, laboratory, and modeling studies have contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information needed to advance our understanding of methane hydrates.

Journal of Chemical and Engineering Data

Response of juvenile Chinook Salmon to an experimental reservoir operation to facilitate downstream migration

Objectives High-head dams and storage reservoirs impact ecological processes, impeding recovery efforts of Pacific salmon Oncorhynchus spp. in the western United States. These projects can delay migration, increase risks of predation and disease, and induce mortality for juvenile Pacific salmon during downstream passage. To mitigate these negative effects, large-scale changes to dam operations have been proposed as interim measures or alternatives to engineered fish passage solutions. A novel deep drawdown operation of the Lookout Point Project (two dams and reservoirs) in Oregon serves as a case study for learning from a large-scale management experiment. Beginning in July 2024, Lookout Point Reservoir was slowly lowered to attain minimal levels from mid-November to mid-December with the intent of expediting downstream passage through the project for juvenile Chinook Salmon Oncorhynchus tshawytscha . We evaluated the impacts of the months-long operation on two life histories of juvenile Chinook Salmon with different rearing environments and growth rates. Methods Acoustic telemetry was used to monitor juvenile Chinook Salmon in the Lookout Point Project. Environmental data, including water temperature and hydrological conditions, were collected. We fitted a time-integrated migration survival model to these data to estimate the effects of management-influenced covariates and fish length on apparent survival and residence time in each reach of the Lookout Point Project. Results Larger fish had higher survival than smaller fish in each reach of the Lookout Point Project. Apparent survival through each dam of the Lookout Point Project was highest and forebay residence times lowest during the latter part of the drawdown (late November). However, early periods of the drawdown (September) were associated with a transition from a thermally stratified reservoir to a warm isothermal reservoir that negatively impacted reservoir survival. Conclusions The deep drawdown of the Lookout Point Project achieved the management intent to improve downstream passage for juvenile Chinook Salmon at the lowest reservoir elevations but also caused unintended changes in the reservoir rearing environment prior to full drawdown. Further research could resolve remaining uncertainties regarding the overall effectiveness of drawdown operations with respect to the population dynamics of different juvenile life history strategies. Understanding these factors would help optimize future management actions aimed at Pacific salmon recovery above the Lookout Point Project.

Oregon