Search USGS⌕ Search

SEARCH · Search USGS

Results for “Facies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2009

40Ar/39Ar dating of Silurian and late Devonian cleavages in lower greenschist-facies rocks in the Westminster terrane, Maryland, USA

40 Ar/ 39 Ar dating of muscovite, biotite, and K-feldspar combined with microstructural analysis of lower greenschist-facies, polymetamorphic, phyllitic rocks, and marbles were successfully used to decipher the thermal and tectonic histories of the Westminster and adjacent terranes in western Maryland. The presence of unreset detrital muscovite in some samples demonstrates that temperatures in these rocks never exceeded the closure temperature for argon diffusion in muscovite, ∼350 ± 50 °C. Minor biotite in some arkoses constrains the minimum metamorphic temperatures to ≥∼320 °C. These data show an Early Silurian (ca. 430 Ma) cleavage in the western part of the Westminster terrane and a Late Devonian event (ca. 370 Ma) in the eastern Westminster and adjacent Potomac terranes. These two cleavage domains are separated by the NE-trending, newly identified Parrs Ridge fault zone. We propose that the sinistral transpressive collision of the Carolina terrane with Laurentia emplaced the western portion of the Westminster terrane in the Pennsylvania embayment along the Martic fault where it was folded and cleaved at ca. 430 Ma but otherwise largely sheltered from later deformation. The later Late Devonian dextral transpressive accretion of the outboard Potomac terrane thrust rocks of the eastern Westminster and Potomac terranes to the west, causing Late Devonian (360–370 Ma) S 2 cleavage in these rocks, but only minimal discrete overprinting S 3 cleavages in rocks farther west. Final juxtaposition and thermal convergence of these terranes occurred along reactivated dextral strike-slip faults in the Alleghanian at ca. 300 Ma.

Maryland↗
USGS1999

Depositional facies and sequence stratigraphy of a Lower Carboniferous bryozoan-crinoidal carbonate ramp in the Illinois Basin, mid-continent USA

The Lower Carboniferous Fort Payne and Ullin Formations in the Illinois Basin form the transgressive and highstand systems tracts that were deposited in a carbonate ramp setting. During deposition of the Ullin Limestone, biotic communities dominated by fenestrate bryozoans and echinoderms (primarily crinoids) proliferated, possibly in response to global tectonic, biological, and oceanographic events that affected bathymetry and nutrient supply. The Fort Payne Formation consists of a dark grey-brown, siliceous and argillaceous lime mudstone in the lower part (transgressive systems tract) and a very fine-grained wackestone to packstone with rare mud mounds in the upper part (early highstand), and was deposited in an outer ramp to basinal environment. During deposition of the lower Ullin Limestone (mostly early highstand), bryozoan-crinoidal build-ups accreted both laterally and vertically into several relatively large carbonate banks, which were partly surrounded by siliceous Fort Payne sea. Bryozoans (primarily fenestrates) were especially prevalent during the late stage of bank development and formed mud-free bioherms up to 120 m thick. In places, carbonate mud mounds also formed during the early stage of bank deposition. Bioherm development declined during deposition of the upper Ullin Limestone (late highstand), and a broad, storm-dominated carbonate ramp was established that became the site for widespread deposition of bryozoan-crinoidal sandwaves. Gradual shallowing led to ooid formation at the end of Ullin deposition. This sequence was terminated by a relative rise in sea level that resulted in deposition of the transgressive facies of the lower part of the overlying Salem Limestone. The depositional style and the nature of skeletal material of the Fort Payne and Ullin Formations are similar to those of cool-water carbonates. A deep-water setting along with upwelling of cool, nutrient-rich oceanic waters may have been responsible for the proliferation of bryozoans and crinoids at this time. The deep-water setting and abundant nutrient supply also may have restricted the formation of ooids and proliferation of shallow-water calcareous organisms.

Geological Society Special Publication↗
USGS1999

Late Neogene sedimentary facies and sequences in the Pannonian Basin, Hungary

This paper is part of the special publication No.156, The Mediterranean basins: Tertiary extension within the Alpine Orogen. (eds B.Durand, L. Jolivet, F.Horvath and M.Seranne). Detailed sedimentological, facies and numerical cycle analysis, combined with magnetostratigraphy, have been made in a number of boreholes in the Pannonian Basin, in order to study the causes of relative water-level changes and the history of the basin subsidence. Subsidence and infilling of the Pannonian Basin, which was an isolated lake at that time occurred mainly during the Late Miocene and Pliocene. The subsidence history was remarkably different in the individual sub-basins: early thermal subsidence was interrupted in the southern part of the basin, while high sedimentation rate and continuous subsidence was detected in the northeastern sub-basin. Three regional unconformities were detected in the Late Neogene Pannonian Basin fill, which represent 0.5 and 7.5 Ma time spans corresponding to single and composite unconformities. Consequently two main sequences build up the Late Neogene Pannonian Basin fill: a Late Miocene and a Pliocene one. Within the Late Miocene sequence there are smaller sedimentary cycles most probably corresponding to climatically driven relative lake-level changes in the Milankovitch frequency band. Considering the periods, the estimated values for precession and eccentricity in this study (19 and 370 ka) are close to the usually cited ones. In the case of obliquity the calculated period (71 ka) slightly deviates from the generally accepted number. Based on the relative amplitudes of oscillations, precession (sixth order) and obliquity (fifth order) cycles had the most significant impact on the sedimentation. Eccentricity caused cycles (fourth order) are poorly detectable in the sediments. The longer term (third order) cycles had very slight influence on the sedimentation pattern. Progradation, recorded in the Late Miocene sequence, correlates poorly in time within the basin. The dominant controls of this process probably were changes of basin subsidence rate and the very high sedimentation rate. The slow, upward trend of silt and sand bed thickness as well as that of the grain size also reflects the local progradation.

Geological Society Special Publication↗
USGS2014

Towards the definition of AMS facies in the deposits of pyroclastic density currents

Anisotropy of magnetic susceptibility (AMS) provides a statistically robust technique to characterize the fabrics of deposits of pyroclastic density currents (PDCs). AMS fabrics in two types of pyroclastic deposits (small-volume phreatomagmatic currents in the Hopi Buttes volcanic field, Arizona, USA, and large-volume caldera-forming currents, Caviahue Caldera, Neuquén, Argentina) show similar patterns. Near the vent and in areas of high topographical roughness, AMS depositional fabrics are poorly grouped, with weak lineations and foliations. In a densely welded proximal ignimbrite, this fabric is overprinted by a foliation formed as the rock compacted and deformed. Medial deposits have moderate–strong AMS lineations and foliations. The most distal deposits have strong foliations but weak lineations. Based on these facies and existing models for pyroclastic density currents, deposition in the medial areas occurs from the strongly sheared, high-particle-concentration base of a density-stratified current. In proximal areas and where topography mixes this denser base upwards into the current, deposition occurs rapidly from a current with little uniformity to the shear, in which particles fall and collide in a chaotic fashion. Distal deposits are emplaced by a slowing or stalled current so that the dominant particle motion is vertical, leading to weak lineation and strong foliation.

Arizona;Neuqu�n↗
USGS2016

Nonmarine facies in the Late Triassic(?) to Early Jurassic Horn Mountain Tuff member of the Talkeetna Formation, Horn Mountain, lower Cook Inlet basin, Alaska

The Talkeetna Formation is a prominent lithostratigraphic unit in south-central Alaska. In the Iniskin–Tuxedni area, Detterman and Hartsock (1966) divided the formation into three mappable units including, from oldest to youngest, the Marsh Creek Breccia, the Portage Creek Agglomerate, and the Horn Mountain Tuff Members. The Horn Mountain Tuff Member was thought to include rocks deposited in a nonmarine setting based on the presence of “tree stumps in an upright position” (Detterman and Hartsock, 1966, p. 19) near the top of the type section at Horn Mountain. Bull (2015) recognized possible nonmarine volcaniclastic rocks in the member during the 2014 field season in a saddle on the north side of Horn Mountain (figs. 2-1 and 2-2). The authors visited this location in 2015 and measured a short stratigraphic section to document facies, interpret depositional setting, and constrain age. This report summarizes our field observations and presents preliminary interpretations.

Alaska↗
USGS2013

Oceanographic controls on sedimentary and geochemical facies on the Peru outer shelf and upper slope

Concentrations and characteristics of organic matter in surface sediments deposited under an intense oxygen-minimum zone (OMZ) on the Peru margin were mapped and studied in samples from deck-deployed box cores and push cores acquired by submersible on two east-west transects spanning depths of 75 to 1,000 meters (m) at 12°S and 13.5°S. On the basis of sampling and analyses of the top 1–2 centimeters (cm) of available cores, three main belts of sediments were identified on each transect with increasing depth: (1) muds rich in organic carbon (OC); (2) authigenic phosphatic mineral crusts and pavements; and (3) glaucony facies. Sediments rich in OC on the 12°S transect were mainly located on the outer shelf and upper slope (150–350 m), but they occurred in much shallower water (approximately 100 m) on the 13.5°S transect. The organic matter is almost entirely marine as confirmed by Rock-Eval pyrolysis and isotopic composition of OC. Concentrations of OC are highest (up to 18 percent) in sediments within the OMZ where dissolved oxygen (DO) concentrations are <5 micromoles per kilogram (μM). Even at these low concentrations of DO, however, the surface sediments from within the OMZ are dominantly unlaminated. Concentrations of DO may have the dominant effect on organic matter characteristics, but reworking of fine-grained sediment and organic matter by strong bottom currents with velocities as high as 30 centimeters per second (cm/s) on the slope between 150 and 300 m and redeposition on the seafloor in areas of lower energy and higher DO concentration also exert important controls on OC concentration and degree of oxidation in this region. Phosphate-rich sediments and crusts occurred at depths of about 300 to 550 m on both transects. Nodular crusts of sediment cemented by carbonate-fluorapatite (CFA; phosphorite) or dolomite form within the OMZ. These phosphorite crusts evolve through cementation from light olive-green, stiff but friable, phosphatized claystone “protocrusts” through dense, dark phosphorite crusts, cemented breccias, and pavements. The degree of phosphatization and thickness of the crusts depend on the rates of sediment supply and on the strength and frequency of currents that re-expose crusts on the seafloor. Phosphorite crusts and pavements on the Peru margin can only become buried and incorporated into the geologic record once bottom currents slacken sufficiently to allow fine-grained sediment to accumulate. Glaucony-rich surface sediments, relatively undiluted by other components, were found mainly in deeper water on the 13.5°S transect (750 m to at least 1,067 m). These sediments consist almost entirely of sand-size glaucony pellets. These widespread glaucony sands formed in place and were then concentrated and reworked by strong currents that winnowed away the fine-grained matrix. Although the glaucony occurs in sand-size pellets, the pellets are made up of aggregates of authigenic, platy, micaceous clay minerals. Glaucony is predominantly a potassium (K), sodium (Na), iron (Fe), magnesium (Mg) aluminosilicate with an approximate formula of (K,Na)(Fe 3+ ,Al,Mg) 2 (Si,Al) 4 O 10 (OH) 2 . The glaucony on the 13.5°S transect forms by alteration of one or more original “framework” minerals (carbonate and [or] aluminosilicates) to form pellital aggregates of Fe-, K-, and Mg-rich clay minerals. Because Fe, K, and Mg are derived from seawater, sedimentation rates must be extremely slow in order for the original framework minerals to remain in contact with seawater. The close association of glaucony and phosphorite indicates a delicate balance between the slightly oxidizing conditions at the base of the OMZ that form glaucony and the slightly reducing conditions that mobilize iron and phosphate to form phosphorite.

Open-File Report↗
USGS1974

Nahcolite analyses of seven drill cores from the saline facies of the Green River Formation in Northwest Colorado

This report presents the results of about 3,060 quantitative analyses for nahcolite in cores from seven holes drilled in the saline facies of the Green River Formation (Eocene) in Rio Blanco County, Colorado. Nahcolite analyses of three additional drill cores from the same area were reported earlier by Dyni, Beck, and Mountjoy (1971). The analyses of these 10 drill cores were made during a detailed stratigraphic and resource study of the nahcolite that is found in association with the oil-shale deposits of the Green River Formation in the Piceance Creek basin (Dyni, 1973). The locations of the drill holes are shown on figure 1 and are described in the table headings.

Colorado↗
USGS1974

Stratigraphy and nahcolite resources of the saline facies of the Green River Formation, Rio Blanco County, Colorado

Based on a study of 10 drill cores, a sequence of oil shale and associated nahcolite, nearly 2,000 feet thick, in the lacustrine Green River Formation (Eocene) in the Piceance Creek basin, Rio Blanco County, Colo., was divided in ascending order into zones 1 to 13, B-groove, Mahogany zone (with lower, middle, and upper parts), and A-groove at the top. The odd-numbered zones and the Mahogany zone are mappable subsurface units of relatively thick oil shale and are distinguished from the even-numbered zones and A- and B-grooves which are thinner units of oil shale of lower grade. Large amounts of nahcolite found in zones 5 to 12 occur in (1) coarse-grained crystalline aggregates scattered through oil shale, (2) laterally continuous units of fine-grained crystals disseminated in oil shale, (3) brown microcrystalline beds, and (4) white coarse-grained beds that grade laterally into halitic rocks toward basin center. The original .upper limit of the nahcolite and halitic rocks is not yet completely known, but the present top is marked by a dissolution surface. Above this surface the rocks, extending from zones 11 or 12 upward into the Mahogany zone, form a water-saturated 'leached zone,' a geohydrologic unit in which large amounts of water-soluble minerals probably mostly nahcolite, and halite, were removed by ground-water dissolution. Rocks in the leached zone, mostly oil shale, are commonly broken and fractured and contain crystal cavities and solution breccias. Several solution breccias can be traced laterally into unleached beds of nahcolite and halite. Although evidence of salines is found in rocks above A-groove, the original saline facies that includes most of the bedded deposits extends from zone 5 upward into A-groove. Potentially ruinable beds of white nahcolite as much as 12 feet thick are found at depths of 1,560 or more feet below the surface. Some thicker beds of high-grade nahcolite are believed to be too close to the dissolution surface for safe room-and-pillar mining. Probably the most economical method of mining nahcolite would be as a coproduct of a shale-oil industry. Removal of nahcolite prior to retorting increases significantly the grade of oil shale by as much as 1.6 times, Several zones are more than 300 feet thick and average 30 or more weight percent nahcolite. Resources of nahcolite per square mile range as high as 489 million short tons. The total nahcolite resource in the basin is conservatively estimated at 32 billion short tons, which makes it the secondlargest deposit of sodium carbonate known .in the world.

Open-File Report↗
USGS1998

The nature and timing of tectonism in the western facies terrane of Nevada and California; an outline of evidence and interpretations derived from geologic maps of key areas

Along the outer miogeocline of Nevada and Southern California, lower Paleozoic siliceous sediments and basalt flows, the western facies terrane emerged in Late Devonian time and were deeply eroded; but structural evidence that this event, the Antler Orogeny, involved intense folding and thrust faulting is notably scarce. Almost all the intense folding and thrust faulting of Proterozoic to Permian strata dates from the Jurassic to Eocene interval. If this tectonic history is valid, then the genesis of the Antler Orogeny is reduced to a question of vertical tectonics. Pre-Jurassic contraction involving subduction and collision with island arcs is not indicated or required, but the ultimate origin of Paleozoic tectonism remains unclear.

Professional Paper↗
USGS2007

Stratigraphy and facies of Cretaceous Schrader Bluff and Prince Creek Formations in Colville River Bluffs, North Slope, Alaska

Stratigraphic and sedimentologic studies of facies of the Upper Cretaceous rocks along the Colville River Bluffs in the west-central North Slope of Alaska identified barrier shoreface deposits consisting of vertically stacked, coarsening-upward parasequences in the Schrader Bluff Formation. This vertical stack of parasequence deposits represents progradational sequences that were affected by shoaling and deepening cycles caused by fluctuations of sea level. Further, the vertical stack may have served to stabilize accumulation of voluminous coal deposits in the Prince Creek Formation, which formed braided, high-sinuosity meandering, anastomosed, and low-sinuosity meandering fluvial channels and related flood plain deposits. The erosional contact at the top of the uppermost coarsening-upward sequence, however, suggests a significant drop of base level (relative sea level) that permitted a semiregional subaerial unconformity to develop at the contact between the Schrader Bluff and Prince Creek Formations. This drop of relative sea level may have been followed by a relative sea-level rise to accommodate coal deposition directly above the unconformity. This rise was followed by a second drop of relative sea level, with formation of incised valley topography as much as 75 ft deep and an equivalent surface of a major marine erosion or mass wasting, or both, either of which can be traced from the Colville River Bluffs basinward to the subsurface in the west-central North Slope. The Prince Creek fluvial deposits represent late Campanian to late Maastrichtian depositional environments that were affected by these base level changes influenced by tectonism, basin subsidence, and sea-level fluctuations.

Alaska↗
USGS1973

Metamorphic facies indicated by vein minerals in basal beds of the Great Valley sequence, northern California

A reexamination of reported blueschist mineral localities in the basal strata of the Great Valley sequence revealed only prehnite-pumpellyite facies minerals. Franciscan graywacke thrust below the Great Valley rocks contains lawsonite-quartz blueschist assemblages. At a common pressure of about 4 kb, the Franciscan blueschists formed at lower temperatures than the overlying Great Valley prehnite-bearing rocks, lending support to tectonic models that involve rapid subduction of the Franciscan rocks.

California↗
USGS2006

Facies architecture and paleohydrology of a synrift succession in the Early Cretaceous Choyr Basin, southeastern Mongolia

The Choyr Basin is one of several Early Cretaceous rift basins in southwestern Mongolia that developed in specific regions between north-south trending fold-and-thrust belts. The eastern margin of the basin is defined by high-angle normal and/or strike-slip faults that trend north-to-south and northeast-to-southwest and by the overall geometry of the basin, which is interpreted to be a half graben. The sedimentary succession of the Choyr Basin documents one of the various types of tectono-sedimentary processes that were active in the rift basins of East Asia during Early Cretaceous time. The sedimentary infill of the Choyr Basin is newly defined as the Khalzan Uul and Khuren Dukh formations based on detailed mapping of lateral and vertical variations in component lithofacies assemblages. These two formations are heterotopic deposits and constitute a third-order fluvio-lacustrine sequence that can be divided into transgressive and highstand systems tracts. The lower part of the transgressive systems tract (TST) is characterized by sandy alluvial-fan and braided-river systems on the hanging wall along the western basin margin, and by a gravelly alluvial-fan system on the footwall along the eastern basin margin. The alluvial-fan and braided-river deposits along the western basin margin are fossiliferous and are interpreted to have developed in association with a perennial fluvial system. In contrast, alluvial-fan deposits along the eastern basin margin do not contain any distinct faunas or floras and are interpreted to have been influenced by a high-discharge ephemeral fluvial system associated with fluctuations in wetting and drying paleohydrologic processes. The lower part of the TST deposit fines upward to siltstone-dominated flood-plain and ephemeral-lake deposits that constitute the upper part of the TST and the lower part of the highstand systems tract (HST). These mudstone deposits eventually reduced the topographic irregularities typical of the early stage of synrift basin development, with an associated decrease in topographic-slope gradients. Finally, a high-sinuosity meandering river system drained to the south during the late highstand stage in response to the northward migration of the depocenter. The upper HST deposits are also fossiliferous and are interpreted to have been influenced by a perennial fluvial system, although the average annual discharge of this system was probably less than 5 percent of that involved in the formation of the lower TST deposits along the western basin margin. ?? 2006 Elsevier Ltd. All rights reserved.

Cretaceous Research↗
USGS2006

Groundwater dolocretes from the Upper Triassic of the Paris Basin, France: A case study of an arid, continental diagenetic facies

Thick dolomite-cemented horizons (dolocretes) occur within a fluvial sandstone-mudstone sequence of Late Triassic age in the western part of the Paris Basin, France. Two types of dolomites can be distinguished: (a) nodular dolomitic beds less than a few metres thick, which formed within mottled overbank siltstones and mudstones; and (b) massive dolomite up to 16 m thick, which occurs in coarse grained channel sandstones and conglomerates. The majority of the dolomite consists of a finely crystalline groundmass of dolomicrospar and, less commonly, dolomicrite. Glaebules, irregular spar-filled cracks, spheroidal dolomite, silicification and vuggy porosity are locally abundant in the massive dolomite. In contrast, biologically induced micromorphological features such as rhizocretions and alveolar-septal fabrics were observed in the thin, nodular dolomite beds. The dolomite is near stoichiometric, well ordered and non-ferroan. 18O values range from −7·7 to −0·4%o PDB and 18O values range from −5·1 to + 1·8%0 PDB and no obvious difference in the stable isotopic composition between both types of dolomites was observed. Sr isotope ratios range from 0·7101 to 0·7126 and are invariably higher than the contemporary Triassic sea water. A vadose—pedogenic origin for the thin dolocrete layers is indicated by the occurrence of rhizocretions and other biological structures. Several features, however, argue against a pedogenic origin for the massive carbonates, most notably the absence of biologically induced structures, the occurrence in coarse grained channel (and not overbank) deposits, and the great thickness. These units are thus interpreted as groundwater in origin. Phreatic calcretes of Quaternary age, widespread in inland Australia, are regarded as a modern analogue for the Triassic Paris Basin dolocretes. Petrographic observations argue in favour of primary (proto)dolomite precipitation, although early diagenetic replacement of calcite by (proto)dolomite cannot be ruled out. Strontium and carbon isotope data of early diagenetic dolocrete cements and oxygen isotope data of early diagenetic silica indicate an entirely non-marine, continental origin for the groundwaters. The poorly ordered and non-stoichiometric protodolomite probably underwent stabilization upon further burial resulting in a near-stoichiometric, well ordered dolomite that clearly lacks evidence for pervasive recrystallization.

Paris↗
USGS2005

A new species of Ischyodus (Chondrichthyes: Holocephali: Callorhynchidae) from Upper Maastrichtian Shallow marine facies of the Fox Hills and Hell Creek Formations, Williston basin, North Dakota, USA

A new species of chimaeroid, Ischyodus rayhaasi sp. nov., is described based primarily upon the number and configuration of tritors on palatine and mandibular tooth plates. This new species is named in honour of Mr Raymond Haas. Fossils of I. rayhaasi have been recovered from the Upper Maastrichtian Fox Hills Formation and the Breien Member and an unnamed member of the Hell Creek Formation at sites in south-central North Dakota and north-central South Dakota, USA. Ischyodus rayhaasi inhabited shallow marine waters in the central part of the Western Interior Seaway during the latest Cretaceous. Apparently it was also present in similar habitats at that time in the Volga region of Russia. Ischyodus rayhaasi is the youngest Cretaceous species Ischyodus known to exist before the Cretaceous/Tertiary extinction, and the species apparently did not survive that event. It was replaced by Ischyodus dolloi, which is found in the Paleocene Cannonball Formation of the Williston Basin region of North Dakota and is widely distributed elsewhere. ?? The Palaeontological Association.

Palaeontology↗
USGS1997

Paleogeographic significance of Clavohamulus hintzei Miller (Conodonta) and other Ibexian conodonts in an early Paleozoic carbonate platform facies of the Argentine Precordillera

Pre-Tremadocian conodonts and trilobites and Tremadocian conodonts are reported from the Cambrian and Ordovician La Silla Formation in the Cerro La Silla section in east-southeast Ja??chal, San Juan Province, Argentina. A shallow marine conodont fauna contains elements of Clavohamulus hintzei Miller, a common species in North America, but reported for the first time from the early Paleozoic platform carbonates of the western Argentine Precordillera. The presence of this species suggests a correlation with the Clavohamulus hintzei conodont subbiozone of the Cordylodus intermedius conodont biozone in North America, considered Early Ordovician (Skullrockian Stage, Ibexian Series) in North America, but by South American and European standards, this biozone would be of latest Cambrian age. C. hintzei and associated conodonts of the La Silla Formation are typical of the tropical faunas of the North American Midcontinent Faunal Province; Late Cambrian trilobites from lower in the formation also are typical North American taxa. The presence of these faunas in the platform carbonates is consistent with plate reconstructions suggesting that the Precordillera was in a tropical or subtropical position close to Laurentia during the late Precambrian and early Paleozoic. These new paleontological data provide one more argument for recent models of the Precordillera as a displaced terrane derived from the Ouachita Embayment at the southern margin of Laurentia.

Geological Society of America Bulletin↗
USGS2008

Devonian carbonate platform of eastern Nevada: Facies, surfaces, cycles, sequences, reefs, and cataclysmic Alamo Impact Breccia

Devonian limestone and dolostone formations are superbly exposed in numerous mountain ranges of southeastern Nevada. The Devonian is as thick as 1500 m there and reveals continuous exposures of a classic, long-lived, shallow-water carbonate platform. This field guide provides excursions to Devonian outcrops easily reached from the settlement of Alamo, Nevada, ~100 mi (~160 km) north of Las Vegas. Emphasis is on carbonate-platform lithostratigraphy, but includes overviews of the conodont biochronology that is crucial for regional and global correlations. Field stops include traverses in several local ranges to study these formations and some of their equivalents, in ascending order: Lower Devonian Sevy Dolostone and cherty argillaceous unit, Lower and Middle Devonian Oxyoke Canyon Sandstone, Middle Devonian Simonson Dolostone and Fox Mountain Formation, Middle and Upper Devonian Guilmette Formation, and Upper Devonian West Range Limestone. Together, these formations are mainly composed of hundreds of partial to complete shallowing-upward Milankovitch-scale cycles and are grouped into sequences bounded by regionally significant surfaces. Dolomitization in the Sevy and Simonson appears to be linked to exposure surfaces and related underlying karst intervals. The less-altered Guilmette exhibits characteristic shallowing-upward limestone-to-dolostone cycles that contain typical carbonate-platform fossil- and ichnofossil-assemblages, displays stacked biostromes and bioherms of flourishing stromatoporoids and sparse corals, and is punctuated by channeled quartzose sandstones. The Guilmette also contains a completely exposed ~50-m-thick buildup that is constructed mainly of stromatoporoids, with an exposed and karstified crest. This buildup exemplifies such Devonian structures known from surface and hydrocarbon-bearing subsurface locations worldwide. Of special interest is the stratigraphically anomalous Alamo Breccia that represents the middle member of the Guilmette. This spectacular cataclysmic megabreccia, produced by the Alamo Impact Event, is as thick as 100 m and may be the best exposed proven bolide impact breccia on Earth. It contains widespread intervals generated by the seismic shock, ejecta curtain, tsunami surge, and runoff generated by a major marine impact. Newly interpreted crater-rim impact stratigraphy at Tempiute Mountain contains an even thicker stack of impact breccias that are interpreted as parautochthonous, injected, fallback, partial melt, resurge, and possibly post-Event crater fill.

Nevada↗