Search USGS⌕ Search

SEARCH · Search USGS

Results for “Earth Surfaces Processes and Landforms”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2016

Removing sun glint from optical remote sensing images of shallow rivers

Sun glint is the specular reflection of light from the water surface, which often causes unusually bright pixel values that can dominate fluvial remote sensing imagery and obscure the water-leaving radiance signal of interest for mapping bathymetry, bottom type, or water column optical characteristics. Although sun glint is ubiquitous in fluvial remote sensing imagery, river-specific methods for removing sun glint are not yet available. We show that existing sun glint-removal methods developed for multispectral images of marine shallow water environments over-correct shallow portions of fluvial remote sensing imagery resulting in regions of unreliable data along channel margins. We build on existing marine glint-removal methods to develop a river-specific technique that removes sun glint from shallow areas of the channel without overcorrection by accounting for non-negligible water-leaving near-infrared radiance. This new sun glint-removal method can improve the accuracy of spectrally-based depth retrieval in cases where sun glint dominates the at-sensor radiance. For an example image of the gravel-bed Snake River, Wyoming, USA, observed-vs.-predicted R 2 values for depth retrieval improved from 0.66 to 0.76 following sun glint removal. The methodology presented here is straightforward to implement and could be incorporated into image processing workflows for multispectral images that include a near-infrared band.

Earth Surface Processes and Landforms↗
USGS2017

Camera system considerations for geomorphic applications of SfM photogrammetry

The availability of high-resolution, multi-temporal, remotely sensed topographic data is revolutionizing geomorphic analysis. Three-dimensional topographic point measurements acquired from structure-from-motion (SfM) photogrammetry have been shown to be highly accurate and cost-effective compared to laser-based alternatives in some environments. Use of consumer-grade digital cameras to generate terrain models and derivatives is becoming prevalent within the geomorphic community despite the details of these instruments being largely overlooked in current SfM literature. This article is protected by copyright. All rights reserved. A practical discussion of camera system selection, configuration, and image acquisition is presented. The hypothesis that optimizing source imagery can increase digital terrain model (DTM) accuracy is tested by evaluating accuracies of four SfM datasets conducted over multiple years of a gravel bed river floodplain using independent ground check points with the purpose of comparing morphological sediment budgets computed from SfM- and lidar-derived DTMs. Case study results are compared to existing SfM validation studies in an attempt to deconstruct the principle components of an SfM error budget. This article is protected by copyright. All rights reserved. Greater information capacity of source imagery was found to increase pixel matching quality, which produced 8 times greater point density and 6 times greater accuracy. When propagated through volumetric change analysis, individual DTM accuracy (6–37 cm) was sufficient to detect moderate geomorphic change (order 100,000 m 3 ) on an unvegetated fluvial surface; change detection determined from repeat lidar and SfM surveys differed by about 10%. Simple camera selection criteria increased accuracy by 64%; configuration settings or image post-processing techniques increased point density by 5–25% and decreased processing time by 10–30%. This article is protected by copyright. All rights reserved. Regression analysis of 67 reviewed datasets revealed that the best explanatory variable to predict accuracy of SfM data is photographic scale. Despite the prevalent use of object distance ratios to describe scale, nominal ground sample distance is shown to be a superior metric, explaining 68% of the variability in mean absolute vertical error.

Earth Surface Processes and Landforms↗
USGS2017

Channel response to sediment release: insights from a paired analysis of dam removal

Dam removals with unmanaged sediment releases are good opportunities to learn about channel response to abruptly increased bed material supply. Understanding these events is important because they affect aquatic habitats and human uses of floodplains. A longstanding paradigm in geomorphology holds that response rates to landscape disturbance exponentially decay through time. However, a previous study of the Merrimack Village Dam (MVD) removal on the Souhegan River in New Hampshire, USA, showed that an exponential function poorly described the early geomorphic response. Erosion of impounded sediments there was two-phased. We had an opportunity to quantitatively test the two-phase response model proposed for MVD by extending the record there and comparing it with data from the Simkins Dam removal on the Patapsco River in Maryland, USA. The watershed sizes are the same order of magnitude (10 2 km 2 ), and at both sites low-head dams were removed (~3–4 m) and ~65 000 m 3 of sand-sized sediments were discharged to low-gradient reaches. Analyzing four years of repeat morphometry and sediment surveys at the Simkins site, as well as continuous discharge and turbidity data, we observed the two-phase erosion response described for MVD. In the early phase, approximately 50% of the impounded sediment at Simkins was eroded rapidly during modest flows. After incision to base level and widening, a second phase began when further erosion depended on floods large enough to go over bank and access impounded sediments more distant from the newly-formed channel. Fitting functional forms to the data for both sites, we found that two-phase exponential models with changing decay constants fit the erosion data better than single-phase models. Valley width influences the two-phase erosion responses upstream, but downstream responses appear more closely related to local gradient, sediment re-supply from the upstream impoundments, and base flows.

Maryland↗
USGS2017

Geomorphic process from topographic form: automating the interpretation of repeat survey data in river valleys

The ability to quantify the processes driving geomorphic change in river valley margins is vital to geomorphologists seeking to understand the relative role of transport mechanisms (e.g. fluvial, aeolian, and hillslope processes) in landscape dynamics. High-resolution, repeat topographic data are becoming readily available to geomorphologists. By contrasting digital elevation models derived from repeat surveys, the transport processes driving topographic changes can be inferred, a method termed ‘mechanistic segregation.’ Unfortunately, mechanistic segregation largely relies on subjective and time consuming manual classification, which has implications both for its reproducibility and the practical scale of its application. Here we present a novel computational workflow for the mechanistic segregation of geomorphic transport processes in geospatial datasets. We apply the workflow to seven sites along the Colorado River in the Grand Canyon, where geomorphic transport is driven by a diverse suite of mechanisms. The workflow performs well when compared to field observations, with an overall predictive accuracy of 84% across 113 validation points. The approach most accurately predicts changes due to fluvial processes (100% accuracy) and aeolian processes (96%), with reduced accuracy in predictions of alluvial and colluvial processes (64% and 73%, respectively). Our workflow is designed to be applicable to a diversity of river systems and will likely provide a rapid and objective understanding of the processes driving geomorphic change at the reach and network scales. We anticipate that such an understanding will allow insight into the response of geomorphic transport processes to external forcings, such as shifts in climate, land use, or river regulation, with implications for process-based river management and restoration.

Arizona, Colorado↗
USGS2017

Effects of lateral confinement in natural and leveed reaches of a gravel-bed river: Snake River, Wyoming, USA

This study examined the effects of natural and anthropogenic changes in confining margin width by applying remote sensing techniques – fusing LiDAR topography with image-derived bathymetry – over a large spatial extent: 58 km of the Snake River, Wyoming, USA. Fused digital elevation models from 2007 and 2012 were differenced to quantify changes in the volume of stored sediment, develop morphological sediment budgets, and infer spatial gradients in bed material transport. Our study spanned two similar reaches that were subject to different controls on confining margin width: natural terraces versus artificial levees. Channel planform in reaches with similar slope and confining margin width differed depending on whether the margins were natural or anthropogenic. The effects of tributaries also differed between the two reaches. Generally, the natural reach featured greater confining margin widths and was depositional, whereas artificial lateral constriction in the leveed reach produced a sediment budget that was closer to balanced. Although our remote sensing methods provided topographic data over a large area, net volumetric changes were not statistically significant due to the uncertainty associated with bed elevation estimates. We therefore focused on along-channel spatial differences in bed material transport rather than absolute volumes of sediment. To complement indirect estimates of sediment transport derived by morphological sediment budgeting, we collected field data on bed mobility through a tracer study. Surface and subsurface grain size measurements were combined with bed mobility observations to calculate armoring and dimensionless sediment transport ratios, which indicated that sediment supply exceeded transport capacity in the natural reach and vice versa in the leveed reach. We hypothesize that constriction by levees induced an initial phase of incision and bed armoring. Because levees prevented bank erosion, the channel excavated sediment by migrating rapidly across the restricted braidplain and eroding bars and islands.

Wyoming↗
USGS2017

The geomorphic legacy of water and erosion control structures in a semiarid rangeland watershed

Control over water supply and distribution is critical for agriculture in drylands where manipulating surface runoff often serves the dual purpose of erosion control. However, little is known of the geomorphic impacts and legacy effects of rangeland water manipulation infrastructure, especially if not maintained. This study investigated the geomorphic impacts of structures such as earthen berms, water control gates, and stock tanks, in a semiarid rangeland in the southwestern USA that is responding to both regional channel incision that was initiated over a century ago, and a more recent land use change that involved cattle removal and abandonment of structures. The functional condition of remnant structures was inventoried, mapped, and assessed using aerial imagery and lidar data. Headcut initiation, scour, and channel incision associated with compromised lateral channel berms, concrete water control structures, floodplain water spreader berms, and stock tanks were identified as threats to floodplains and associated habitat. Almost half of 27 identified lateral channel berms (48%) have been breached and 15% have experienced lateral scour; 18% of 218 shorter water spreader berms have been breached and 17% have experienced lateral scour. A relatively small number of 117 stock tanks (6%) are identified as structurally compromised based on analysis of aerial imagery, although many currently do not provide consistent water supplies. In some cases, the onset of localized disturbance is recent enough that opportunities for mitigation can be identified to alter the potentially damaging erosion trajectories that are ultimately driven by regional geomorphic instability. Understanding the effects of prior land use and remnant structures on channel and floodplain morphologic condition is critical because both current land management and future land use options are constrained by inherited land use legacy effects.

Arizona↗
USGS2018

Strong variation in weathering of layered rock maintains hillslope‐scale strength under high precipitation

The evolution of volcanic landscapes and their landslide potential are both dependent upon the weathering of layered volcanic rock sequences. We characterize critical zone structure using shallow seismic V p and V s profiles and vertical exposures of rock across a basaltic climosequence on Kohala peninsula, Hawai’i, and exploit the dramatic gradient in mean annual precipitation (MAP) across the peninsula as a proxy for weathering intensity. Seismic velocity increases rapidly with depth and the velocity–depth gradient is uniform across three sites with 500–600 mm/yr MAP, where the transition to unaltered bedrock occurs at a depth of 4 to 10 m. In contrast, velocity increases with depth less rapidly at wetter sites, but this gradient remains constant across increasing MAP from 1000 to 3000 mm/yr and the transition to unaltered bedrock is near the maximum depth of investigation (15–25 m). In detail, the profiles of seismic velocity and of weathering at wet sites are nowhere monotonic functions of depth. The uniform average velocity gradient and the greater depths of low velocities may be explained by the averaging of velocities over intercalated highly weathered sites with less weathered layers at sites where MAP > 1000 mm/yr. Hence, the main effect of climate is not the progressive deepening of a near‐surface altered layer, but rather the rapid weathering of high permeability zones within rock subjected to precipitation greater than ~1000 mm/yr. Although weathering suggests mechanical weakening, the nearly horizontal orientation of alternating weathered and unweathered horizons with respect to topography also plays a role in the slope stability of these heterogeneous rock masses. We speculate that where steep, rapidly evolving hillslopes exist, the sub‐horizontal orientation of weak/strong horizons allows such sites to remain nearly as strong as their less weathered counterparts at drier sites, as is exemplified by the 50°–60° slopes maintained in the amphitheater canyons on the northwest flank of the island.

Hawai'i↗
USGS2018

An updated method for estimating landslide‐event magnitude

Summary statistics derived from the frequency–area distribution (FAD) of inventories of triggered landslides allows for direct comparison of landslides triggered by one event (e.g. earthquake, rainstorm) with another. Such comparisons are vital to understand links between the landslide‐event and the environmental characteristics of the area affected. This could lead to methods for rapid estimation of landslide‐event magnitude, which in turn could lead to estimates of the total triggered landslide area. Previous studies proposed that the FAD of landslides follows an inverse power‐law, which provides the basis to model the size distribution of landslides and to estimate landslide‐event magnitude ( mLS ), which quantifies the severity of the event. In this study, we use a much larger collection of earthquake‐induced landslide (EQIL) inventories ( n =45) than previous studies to show that size distributions are much more variable than previously assumed. We present an updated model and propose a method for estimating mLS and its uncertainty that better fits the observations and is more reproducible, robust, and consistent than existing methods. We validate our model by computing mLS for all of the inventories in our dataset and comparing that with the total landslide areas of the inventories. We show that our method is able to estimate the total landslide area of the events in this larger inventory dataset more successfully than the existing methods.

Earth Surface Processes and Landforms↗
USGS2018

The influence of neap-spring tidal variation and wave energy on sediment flux in salt marsh tidal creeks

Sediment flux in marsh tidal creeks is commonly used to gage sediment supply to marshes. We conducted a field investigation of temporal variability in sediment flux in tidal creeks in the accreting tidal marsh at China Camp State Park adjacent to northern San Francisco Bay. Suspended-sediment concentration (SSC), velocity, and depth were measured near the mouths of two tidal creeks during three six-to-ten-week deployments: two in winter and one in summer. Currents, wave properties and SSC were measured in the adjacent shallows. All deployments spanned the largest spring tides of the season. Results show that tidally-averaged suspended-sediment flux (SSF) in the tidal creeks decreased with increasing tidal energy, and SSF was negative (bayward) for tidal cycles with maximum water surface elevation above the marsh plain. Export during the largest spring tides dominated the cumulative SSF measured during the deployments. During ebb tides following the highest tides, velocities exceeded 1 m/s in the narrow tidal creeks, resulting in negative tidally-averaged water flux, and mobilizing sediment from the creek banks or bed. Storm surge also produced negative SSF. Tidally-averaged SSF was positive in wavey conditions with moderate tides. Spring-tide sediment export was about 50% less at a station 130 m further up the tidal creek than at the creek mouth. The negative tidally-averaged water flux near the creek mouth during spring tides indicates that in the lower marsh, some of the water flooding directly across the bay--marsh interface drains through the tidal creeks, and suggests that this interface may be a pathway for sediment supply to the lower marsh as well.

California↗
USGS2018

A regime shift in sediment export from a coastal watershed during a record wet winter, California: Implications for landscape response to hydroclimatic extremes

Small, steep watersheds are prolific sediment sources from which sediment flux is highly sensitive to climatic changes. Storm intensity and frequency are widely expected to increase during the 21st century, and so assessing the response of small, steep watersheds to extreme rainfall is essential to understanding landscape response to climate change. During record winter rainfall in 2016–2017, the San Lorenzo River, coastal California, had nine flow peaks representing 2–10‐year flood magnitudes. By the third flood, fluvial suspended sediment showed a regime shift to greater and coarser sediment supply, coincident with numerous landslides in the watershed. Even with no singular catastrophic flood, these flows exported more than half as much sediment as had a 100‐year flood 35 years earlier, substantially enlarging the nearshore delta. Annual sediment load in 2017 was an order of magnitude greater than during an average‐rainfall year, and 500‐fold greater than in a recent drought. These anomalous sediment inputs are critical to the coastal littoral system, delivering enough sediment, sometimes over only a few days, to maintain beaches for several years. Future projections of megadroughts punctuated by major atmospheric‐river storm activity suggest that interannual sediment‐yield variations will become more extreme than today in the western USA, with potential consequences for coastal management, ecosystems, and water‐storage capacity. The occurrence of two years with major sediment export over the past 35 years that were not associated with extremes of the El Niño Southern Oscillation or Pacific Decadal Oscillation suggests caution in interpreting climatic signals from marine sedimentary deposits derived from small, steep, coastal watersheds, to avoid misinterpreting the frequencies of those cycles.

California↗
USGS2018

Dust on a Hawaiian volcano: A regional model using field measurements to estimate transport and deposition

The western slopes of Hawaii's Mauna Kea volcano are mantled by fine-grained soils, the record of volcanic airfall and eolian deposition. Where exposed, strong winds transport this sediment across West Hawaii, affecting tourism and local communities with decreased air and water quality. Operations on US Army's Ke'amuku Maneuver Area (KMA) have the potential to increase dust flux from these deposits. The USGS established 18 ground monitoring sites and sampling locations surrounding KMA. For over 3 years, each station measured vertical and horizontal dust flux, while co-located anemometers measured wind speed and direction. We used these datasets to develop a parsimonious regional model for dust supply and transport to assess whether KMA is a net dust sink or source. We found that dust transport is most highly correlated with threshold wind speeds of 8 m/s. We used this value as the regional average threshold wind speed for dust entrainment. Using a model that partitions measured horizontal dust flux into inward- and outward-directed components, we estimate that KMA is currently a net dust sink. Geochemical analysis of dust samples illustrates that local organics and carbonate make up 64% of dust mass, the remainder being volcanic silt and fine sand. Measured vertical dust deposition rates of 0.006 mm/yr are similar to 0.004 mm/yr of deposition predicted from taking the divergence of dust across KMA's boundary. These rates are low compared with pre-historic rates of ~0.2–0.3 mm/yr, from radiocarbon dating of buried soils. KMA's soils record persistent deposition over millennia, at rates that imply episodic dust storms. Such events created a soil-mantled landscape in the middle of a largely Pleistocene rocky landscape. A substantial portion of fine-grained soils in other leeward Hawaiian Island landscapes may have formed from similar eolian deposition, and not direct weathering of parent rock. Published 2018. This article is a U.S. Government work and is in the public domain in the USA.

Hawaii↗
USGS2018

Elevated aeolian sediment transport on the Colorado Plateau, USA: The role of grazing, vehicle disturbance, and increasing aridity

Dryland wind transport of sediment can accelerate soil erosion, degrade air quality, mobilize dunes, decrease water supply, and damage infrastructure. We measured aeolian sediment horizontal mass flux ( q ) at 100 cm height using passive aspirated sediment traps to better understand q variability on the Colorado Plateau. Measured q ‘hot spots’ rival the highest ever recorded including 7,460 g m −2 day −1 in an off‐highway vehicle (OHV) area, but were more commonly 50‐2,000 g m −2 day −1 . Overall mean q on rangeland sites was 5.14 g m −2 day −1 , considerably lower than areas with concentrated livestock use (9‐19 g m −2 day −1 ), OHV use (414 g m −2 day −1 ), and downwind of unpaved roads (13.14 g m −2 day −1 ), but were higher than areas with minimal soil disturbance (1.60 g m −2 day −1 ). Rangeland q increased with increasing annual temperature, increased winds, and decreasing precipitation. Spatial modeling suggests that ~92‐93% of regional q occurs in rangelands versus ~7‐8% along unpaved roads. Four of the five largest road q values (n=33) measured were along roads used primarily for oil or gas wells. Our findings indicate that predicted future mega‐droughts will increase q disproportionately in disturbed rangelands, and potentially further compromise air quality, hydrologic cycles, and other ecosystem services.

Colorado Plateau↗
USGS2018

River response to large‐dam removal in a Mediterranean hydroclimatic setting: Carmel River, California, USA

Dam removal provides a valuable opportunity to measure the fluvial response to changes in both sediment supply and the processes that shape channel morphology. We present the first study of river response to the removal of a large (32‐m‐high) dam in a Mediterranean hydroclimatic setting, on the Carmel River, coastal California, USA. This before‐after/control‐impact study measured changes in channel topography, grain size, and salmonid spawning habitat throughout dam removal and subsequent major floods. During dam removal, the river course was rerouted in order to leave most of the impounded sediment sequestered in the former reservoir and thus prevent major channel and floodplain aggradation downstream. However, a substantial sediment pulse occurred in response to base‐level fall, knickpoint migration, and channel avulsion through sediment in the former reservoir above the newly rerouted channel. The sediment pulse advanced ~3.5 km in the first wet season after dam removal, resulting in decreased riverbed grain size downstream of the dam site. In the second wet season after dam removal, high flows (including a 30‐year flood and two 10‐year floods) transported sediment >30 km downstream, filling pools and reducing cross‐channel relief. Deposition of gravel in the second wet season after dam removal enhanced salmonid spawning habitat downstream of the dam site. We infer that in dam removals where most reservoir sediment remains impounded and where high flows follow soon after dam removal, flow sequencing becomes a more important driver of geomorphic and fish‐habitat change than the dam removal alone.

California↗
USGS2018

How many measurements are required to construct an accurate sand budget in a large river? Insights from analyses of signal and noise

Morphological change in river channels is frequently evaluated in the context of mass balance sediment budgets. In a closed sediment budget, measurements of sediment influx and efflux are coupled with measured changes in channel topography to provide both spatial and temporal resolution, and independent estimates of the mass balance. For sediment budgets constructed over long river segments (~10 channel widths or greater) and long periods (~2 years or longer), spatial and temporal accumulation of measurement uncertainty, compounded by inadequate sampling frequency or spatial coverage, may produce indeterminate results. The degree of indeterminacy may be evaluated in the context of a signal-to-noise ratio (SNR), which is a function of the magnitude of the mass balance and the magnitudes of potential systematic uncertainties associated with measurements and incomplete sampling. We report on a closed sand budget consisting of measurements of flux and two morphological surveys for a 50-km segment of a large river over a 3-year period. Accurate reporting of the magnitude and sign of the change in sand storage was only possible by using state-of-the-art techniques with high temporal frequency and large spatial extent. Together, a sand flux and morphological mass balance revealed that sand evacuation was temporally concentrated (~100% of mass change occurred during 19% of the study period) and highly localized (70% of mass change occurred in 12% of the study segment). A SNR analysis revealed that uncertainty resulting from undersampling may approach or exceed that caused by measurement uncertainty and that daily sampling of suspended-sand concentration or repeat mapping of at least 50% of the river segment was required to determine the sand budget with SNR > 1. The approach used here to analyze sand budget uncertainty is especially applicable to other river systems with large temporal variability in sediment transport and large spatial variability in erosion and deposition.

Arizona↗
USGS2003

Processes and rates of sediment and wood accumulation in headwater streams of the Oregon Coast Range, USA

Channels that have been scoured to bedrock by debris flows provide unique opportunities to calculate the rate of sediment and wood accumulation in low-order streams, to understand the temporal succession of channel morphology following disturbance, and to make inferences about processes associated with input and transport of sediment. Dendrochronology was used to estimate the time since the previous debris flow and the time since the last stand-replacement fire in unlogged basins in the central Coast Range of Oregon. Debris flow activity increased 42 per cent above the background rate in the decades immediately following the last wildfire. Changes in wood and sediment storage were quantified for 13 streams that ranged from 4 to 144 years since the previous debris flow. The volume of wood and sediment in the channel, and the length of channel with exposed bedrock, were strongly correlated with the time since the previous debris flow. Wood increased the storage capacity of the channel and trapped the majority of the sediment in these steep headwater streams. In the absence of wood, channels that have been scoured to bedrock by a debris flow may lack the capacity to store sediment and could persist in a bedrock state for an extended period of time. With an adequate supply of wood, low-order channels have the potential of storing large volumes of sediment in the interval between debris flows and can function as one of the dominant storage reservoirs for sediment in mountainous terrain.

Oregon↗
USGS2018

On the development of a magnetic susceptibility‐based tracer for aeolian sediment transport research

Aeolian processes — the erosion, transport, and deposition of sediment by wind — play important geomorphological and ecological roles in drylands. These processes are known to impact the spatial patterns of soil, nutrients, plant‐available water, and vegetation in many dryland ecosystems. Tracers, such as rare earth elements and stable isotopes have been successfully used to quantify the transport and redistribution of sediment by aeolian processes in these ecosystems. However, many of the existing tracer techniques are labor‐intensive and cost‐prohibitive, and hence simpler alternative approaches are needed to track aeolian redistribution of sediments. To address this methodological gap, we test the applicability of a novel metal tracer‐based methodology for estimating post‐fire aeolian sediment redistribution, using spatio‐temporal measurements of low‐field magnetic susceptibility (MS). We applied magnetic metal tracers on soil microsites beneath shrub vegetation in recently burned and control treatments in a heterogeneous landscape in the Chihuahuan desert (New Mexico, USA). Our results indicate a spatially homogeneous distribution of the magnetic tracers on the landscape after post‐burn wind erosion events. MS decreased after wind erosion events on the burned shrub microsites, indicating that these areas functioned as sediment sources following the wildfire, whereas they are known to be sediment sinks in the undisturbed (e.g., not recently burned) ecosystem. This experiment represents the first step toward the development of a cost‐effective and non‐destructive tracer‐based approach to estimate the transport and redistribution of sediment by aeolian processes.

Earth Surface Processes and Landforms↗
USGS2018

Factors controlling landslide frequency-area distributions

A power‐law relation for the frequency–area distribution (FAD) of medium and large landslides (e.g. tens to millions of square meters) has been observed by numerous authors. But the FAD of small landslides diverges from the power‐law distribution, with a rollover point below which frequencies decrease for smaller landslides. Some studies conclude that this divergence is an artifact of unmapped small landslides due to lack of spatial or temporal resolution; others posit that it is caused by the change in the underlying failure process. An explanation for this dilemma is essential both to evaluate the factors controlling FADs of landslides and power‐law scaling, which is a crucial factor regarding both landscape evolution and landslide hazard assessment. This study examines the FADs of 45 earthquake‐induced landslide inventories from around the world in the context of the proposed explanations. We show that each inventory probably involves some combination of the proposed explanations, though not all explanations contribute to each case. We propose an alternative explanation to understand the reason for the divergence from a power‐law. We suggest that the geometry of a landslide at the time of mapping reflects not just one single movement but many, including the propagation of numerous smaller landslides before and after the main failure. Because only the resulting combination of these landslides can be observed due to a lack of temporal resolution, many smaller landslides are not taken into account in the inventory. This reveals that the divergence from the power‐law is not necessarily attributed to the incompleteness of an inventory. This conceptual model will need to be validated by ongoing observation and analysis. Also, we show that because of the subjectivity of mapping procedures, the total number of landslides and total landslide areas in inventories differ significantly, and therefore the shapes of FADs also differ considerably.

Earth Surface Processes and Landforms↗