Search USGS⌕ Search

SEARCH · Search USGS

Results for “Developments in Earth Surface Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

Induced biological soil crust controls on wind erodibility and dust (PM10) emissions

Inducing biological soil crust (biocrust) development is an appealing approach for dust mitigation in drylands due to the resistance biocrusts can provide against erosion. Using a portable device, we evaluated dust emissions from surfaces either inoculated with biocrust, amended with a plant‐based soil stabilizer, or both at varying wind friction velocities. Four months after application, emissions from all treatments were either indistinguishable from or greater than controls, despite evidence of biocrust establishment. All treatments had greater surface roughness and showed more evidence of entrapment of windblown sediment than controls, factors which may have been partially responsible for elevated emissions. There was a synergistic effect of inoculation and stabilizer addition, resulting in a nearly two‐fold reduction in estimated emissions compared to either treatment alone. Stepwise regression analysis indicated that variables associated with surface crust strength (aggregate stability, penetration resistance) were negatively associated with emissions and variables associated with sediment supply (sand content, loose sediment cover) were positively associated with emissions. With more time to develop, the soil‐trapping activity and surface integrity of biocrust inoculum and soil stabilizer mixtures is expected to increase with the accumulation of surface biomass and enhancement of roughness through freeze–thaw cycles.

Utah↗

Derivation of ground surface and vegetation in a coastal Florida wetland with airborne laser technology

The geomorphology and vegetation of marsh-dominated coastal lowlands were mapped from airborne laser data points collected on the Gulf Coast of Florida near Cedar Key. Surface models were developed using low- and high-point filters to separate ground-surface and vegetation-canopy intercepts. In a non-automated process, the landscape was partitioned into functional landscape units to manage the modeling of key landscape features in discrete processing steps. The final digital ground surface-elevation model offers a faithful representation of topographic relief beneath canopies of tidal marsh and coastal forest. Bare-earth models approximate field-surveyed heights by + 0.17 m in the open marsh and + 0.22 m under thick marsh or forest canopy. The laser-derived digital surface models effectively delineate surface features of relatively inaccessible coastal habitats with a geographic coverage and vertical detail previously unavailable. Coastal topographic details include tidal-creek tributaries, levees, modest topographic undulations in the intertidal zone, karst features, silviculture, and relict sand dunes under coastal-forest canopy. A combination of laser-derived ground-surface and canopy-height models and intensity values provided additional mapping capabilities to differentiate between tidal-marsh zones and forest types such as mesic flatwood, hydric hammock, and oak scrub. Additional derived products include fine-scale shoreline and topographic profiles. The derived products demonstrate the capability to identify areas of concern to resource managers and unique components of the coastal system from laser altimetry. Because the very nature of a wetland system presents difficulties for access and data collection, airborne coverage from remote sensors has become an accepted alternative for monitoring wetland regions. Data acquisition with airborne laser represents a viable option for mapping coastal topography and for evaluating habitats and coastal change on marsh-dominated coasts. Such datasets can be instrumental in effective coastal-resource management.

Florida↗

Preliminary photointerpretation map of landslide and other surficial deposits of the Mount Hamilton quadrangle and parts of the Mount Boardman and San Jose quadrangles, Alameda and Santa Clara Counties, California

The nine San Francisco Bay region counties lie within a geologically active, young, and dynamic part of the central and northern Coast Ranges of California. Significant movements of the earth's crust are occurring here at the present time, posing numerous problems to urbanization, including some of special concern. Geological processes such as fault movements, earthquakes, land subsidence, landsliding, slow downslope movement of bedrock and surficial materials, coastal and stream erosion, flooding, and sedimentation are all potentially hazardous. Because of these factors, an understanding of the operation of physical processes in the bay region is desirable for harmonious, efficient, and safe land-use planning, particularly now, with greatly expanded pressures for urban growth. This map presents preliminary information about one aspect of the physical environment necessary to sound land-use planning--the nature and distribution of surficial deposits. Because surficial deposits are common and well developed in much of the bay region, it is useful to know how and why they have formed, as well as what properties they possess. When maps like this are used in combination with other types of environmental information, such as data on soils, bedrock geology, slopes, vegetation, climatic variation, seismic response, and hydrology, it should be easier to arrive at sound decisions regarding the physical aspects of land use. The U.S. Geological Survey is studying many of these factors in the bay region and hopes to provide the community with much of the required information as part of its San Francisco Bay Region Study in cooperation with the Department of Housing and Urban Development. The representation of surficial deposits on this map reflects the way in which a geologist, working exclusively with aerial photographs, interpreted the origin of various elements of the present landscape. The deposits shown here have not been examined in the field. However, by viewing overlapping vertical aerial photographs through a stereoscope, the geologist sees a three-dimensional relief model of the ground surface and can study and interpret the origins of landforms with considerable ease. In fact, for mapping surficial deposits, particularly in reconnaissance-type studies, photointerpretation has advantages over both ground observations and laboratory studies of surficial materials. Of course, better information can be provided when all aspects of the study are integrated. These preliminary photointerpretation maps are only the first stage in a detailed study of surficial deposits in the bay region, but they should provide land-use planners with immediately useful information about the regional distribution of landslide and other surficial deposits. This map indicates the dominant surficial processes that have probably been operative by showing the distribution of different types of surficial deposits. Processes such as weathering, erosion, sedimentation, and the slow as well as rapid downslope movement of earth materials have constantly reshaped the land surface in the past and will continue to in the future, although at varying rates. The processes are interrelated to varying degrees. For example, crustal uplift of the Coast Ranges will lead to increased erosion and downcutting by streams that in turn generally results in increased deposition of sediments in river valleys, lakes, and shoreline areas. Older flood planes and river deposits may be eroded, leaving elevated terrace deposits. In addition, downcutting by streams may cause adjacent slopes to become unstable, thereby increasing the possibility of slope failures. Man's activities can alter natural physical processes in many ways. Simple acts such as overwatering a lawn or placing a septic tank drainfield in ground that is marginally stable may weaken the bedrock and surficial materials enough to induce landsliding. Relatively stable areas may be made unstable as a result of construction activities that involve cutting or oversteepening of natural slopes. Engineers, builders, conservationists, and others concerned with land use must evaluate the potential effects of all types of development, and maps that show the nature and distribution of surficial deposits should provide much of the basic information they need. This map, then, shows the cumulative effects of various processes that have yielded surficial deposits up to the time the photographs used for photointerpretation were taken. It does not indicate directly areas where processes will be most active, nor does it show the rate at which they will operate. However, knowledge of the history of geologic events is a key to understanding and predicting the evolution of an area, even where man's activities significantly change the character of the land. Almost all new landslides, for example, occur in areas with a history of landslide activity.

California↗

Evolution of cutoffs across meander necks in Powder River, Montana, USA

Over a period of several decades, gullies have been observed in various stages of forming, growing and completing the cutoff of meander necks in Powder River. During one episode of overbank flow, water flowing over the down-stream bank of the neck forms a headctu. The headcut migrates up-valley, forming a gully in its wake, until it has traversed the entire neck, cutting off the meander. The river then follows the course of the gully, which is subsequently enlarged as the river develops its new channel. The complete process usually requires several episodes of high water: in only one of the five cases described herein was a meander cutoff initiated and completed during a single large flood.

Earth Surface Processes and Landforms↗

Evolution of melt-vapor surface tension in silicic volcanic systems: Experiments with hydrous melts

We evaluate the melt‐vapor surface tension (σ) of natural, water‐saturated dacite melt at 200 MPa, 950–1055°C, and 4.8–5.7 wt % H 2 O. We experimentally determine the critical supersaturation pressure for bubble nucleation as a function of dissolved water and then solve for σ at those conditions using classical nucleation theory. The solutions obtained give dacite melt‐vapor surface tensions that vary inversely with dissolved water from 0.042 (±0.003) J m −2 at 5.7 wt % H 2 O to 0.060 (±0.007) J m −2 at 5.2 wt % H 2 O to 0.073 (±0.003) J m −2 at 4.8 wt % H 2 O. Combining our dacite results with data from published hydrous haplogranite and high‐silica rhyolite experiments reveals that melt‐vapor surface tension also varies inversely with the concentration of mafic melt components (e.g., CaO, FeO total , MgO). We develop a thermodynamic context for these observations in which melt‐vapor surface tension is represented by a balance of work terms controlled by melt structure. Overall, our results suggest that cooling, crystallization, and vapor exsolution cause systematic changes in σ that should be considered in dynamic modeling of magmatic processes.

Journal of Geophysical Research B: Solid Earth↗

City of Flagstaff Project: Ground Water Resource Evaluation, Remote Sensing Component

Many regions, cities, and towns in the Western United States need new or expanded water resources because of both population growth and increased development. Any tools or data that can help in the evaluation of an area's potential water resources must be considered for this increasingly critical need. Remotely sensed satellite images and subsequent digital image processing have been under-utilized in ground water resource evaluation and exploration. Satellite images can be helpful in detecting and mapping an area's regional structural patterns, including major fracture and fault systems, two important geologic settings for an area's surface to ground water relations. Within the United States Geological Survey's (USGS) Flagstaff Field Center, expertise and capabilities in remote sensing and digital image processing have been developed over the past 25 years through various programs. For the City of Flagstaff project, this expertise and these capabilities were combined with traditional geologic field mapping to help evaluate ground water resources in the Flagstaff area. Various enhancement and manipulation procedures were applied to the digital satellite images; the results, in both digital and hardcopy format, were used for field mapping and analyzing the regional structure. Relative to surface sampling, remotely sensed satellite and airborne images have improved spatial coverage that can help study, map, and monitor the earth surface at local and/or regional scales. Advantages offered by remotely sensed satellite image data include: 1. a synoptic/regional view compared to both aerial photographs and ground sampling, 2. cost effectiveness, 3. high spatial resolution and coverage compared to ground sampling, and 4. relatively high temporal coverage on a long term basis. Remotely sensed images contain both spectral and spatial information. The spectral information provides various properties and characteristics about the surface cover at a given location or pixel (that is, vegetation and/or soil type). The spatial information gives the distribution, variation, and topographic relief of the cover types from pixel to pixel. Therefore, the main characteristics that determine a pixel's brightness/reflectance and, consequently, the digital number (DN) assigned to the pixel, are the physical properties of the surface and near surface, the cover type, and the topographic slope. In this application, the ability to detect and map lineaments, especially those related to fractures and faults, is critical. Therefore, the extraction of spatial information from the digital images was of prime interest in this project. The spatial information varies among the different spectral bands available; in particular, a near infrared spectral band is better than a visible band when extracting spatial information in highly vegetated areas. In this study, both visible and near infrared bands were analyzed and used to extract the desired spatial information from the images. The wide swath coverage of remotely sensed satellite digital images makes them ideal for regional analysis and mapping. Since locating and mapping highly fractured and faulted areas is a major requirement for ground water resource evaluation and exploration this aspect of satellite images was considered critical; it allowed us to stand back (actually up about 440 miles), look at, and map the regional structural setting of the area. The main focus of the remote sensing and digital image processing component of this project was to use both remotely sensed digital satellite images and a Digital Elevation Model (DEM) to extract spatial information related to the structural and topographic patterns in the area. The data types used were digital satellite images collected by the United States' Landsat Thematic Mapper (TM) and French Systeme Probatoire d'Observation de laTerre (SPOT) imaging systems, along with a DEM of the Flagstaff region. The USGS Mini Image Processing Sy

Open-File Report↗

Three-dimensional imaging, change detection, and stability assessment during the centerline trench levee seepage experiment using terrestrial light detection and ranging technology, Twitchell Island, California, 2012

A full scale field seepage test was conducted on a north-south trending levee segment of a now bypassed old meander belt on Twitchell Island, California, to understand the effects of live and decaying root systems on levee seepage and slope stability. The field test in May 2012 was centered on a north-south trench with two segments: a shorter control segment and a longer seepage test segment. The complete length of the trench area measured 40.4 meters (m) near the levee centerline with mature trees located on the waterside and landside of the levee flanks. The levee was instrumented with piezometers and tensiometers to measure positive and negative porewater pressures across the levee after the trench was flooded with water and held at a constant hydraulic head during the seepage test—the results from this component of the experiment are not discussed in this report. We collected more than one billion three-dimensional light detection and ranging (lidar) data points before, during, and after the centerline seepage test to assess centimeter-scale stability of the two trees and the levee crown. During the seepage test, the waterside tree toppled (rotated 20.7 degrees) into the water. The landside tree rotated away from the levee by 5 centimeters (cm) at a height of 2 m on the tree. The paved surface of the levee crown had three regions that showed subsidence on the waterside of the trench—discussed as the northern, central, and southern features. The northern feature is an elongate region that subsided 2.1 cm over an area with an average width of 1.35 m that extends 15.8 m parallel to the trench from the northern end of the trench to just north of the trench midpoint, and is associated with a crack 1 cm in height that formed during the seepage test on the trench wall. The central subsidence feature is a semicircular region on the waterside of the trench that subsided by as much as 6.2 cm over an area 3.4 m wide and 11.2 m long. The southern feature is an elongate region that has a maximum subsidence of 3.5 cm over an area 0.75 m wide and 8.1 m long and is associated with a number of small fractures in the pavement that are predominately north-south-trending and parallel to the trench. We determined that there was no significant motion of the levee flank during the last week of the seepage test. We also determined biomorphic parameters for the landside tree, such as the 3D positioning on the levee, tree height, levee parallel/perpendicular cross sectional area, and canopy centroid. These biomorphic parameters were requested to support a University of California Berkeley team studying seepage and stability on the levee. A gridded, 2-cm bare-earth digital elevation model of the levee crown and the landside levee flank from the final terrestrial lidar (T-Lidar) survey provided detailed topographic data for future assessment. Because the T-Lidar was not integrated into the project design, other than an initial courtesy dataset to help characterize the levee surface, our ability to contribute to the overall science goals of the seepage test was limited. Therefore, our analysis focused on developing data collection and processing methodology necessary to align ultra high-resolution T-Lidar data (with an average spot spacing 2–3 millimeters on the levee crown) from several instrument setup locations to detect, measure, and characterize dynamic centimeter-scale deformation and surface changes during the seepage test.

California↗

Geology and concepts of genesis of important types of uranium deposits

Uranium ore deposits occur in nearly every major rock type in the earth’s crust, and nearly all igneous, metamorphic, and sedimentary processes are capable of concentrating or dispersing uranium. However, only three types of deposits account for more than 70 percent of known Western World Reasonably Assured Resources (WWRAR): Precambrian quartz-pebble conglomerate type, Proterozoic unconformity type, and Phanerozoic sandstone type. Igneous-related processes in plutonic, volcanic, and magmatic-hydrothermal environments, considered important 25 years ago, now account for less than 10 percent of world resources known at present. The oldest known ore deposits were formed in conglomerates by placer processes under unique anoxic conditions. For the last 2.2 b.y., since oxygenation of the atmosphere, the genesis of both high- and low-temperature deposits has been dominated by three general geochemical processes: (1) oxidation of uranium to soluble U(VI) species permitting aqueous transport, perhaps most commonly as uranyl-carbonate complexes; (2) reduction, principally by C, S −2 , or Fe +2 species, to U(IV) to allow precipitation of uraninite (pitchblende), and coffinite, although the specific reductant commonly cannot be determined because these three tend to be associated geologically; and (3) igneous and metamorphic differentiation caused by exclusion of uranium from crystal structure of most rock-forming minerals. The geochemistry of uranium ore-forming processes has changed in time because of the evolution of life forms and their impact on the earth’s oxygen and carbon budgets. This evolution is reflected in changing predominance of ore types in geologic time: (1) pre-2.8 b.y. ago—no known uranium ore deposits; (2) ca. 2.8 to 2.2 b.y. ago—the first intràcratonic basins and anoxic atmosphere permitted accumulation of placer deposits of uraninite in quartz-pebble conglomerates; these deposits contain about 19 percent of the western world’s resources; (3) ca. 2.2 to 0.4 b.y. ago—following oxygenation of the atmosphere uranium was oxidized and transported as soluble U(VI) complexes to sites of reduction, commonly in organic carbon-rich marginal marine environments. Diagenesis, metamorphism, and near-surface redox enrichment subsequently formed unconformity-type, ultrametamorphic-type, and vein-type ore deposits which together contain more than 25 percent of the western world’s resources; (4) ca. 0.4 b.y. ago to present—after development of land plants the most important ore-forming process was redox-controlled deposition from ground water in continental sediments. Sandstone-type deposits, characteristic of this stage, contain about 40 percent of the western world’s resources.

Book chapter↗

“Points requiring elucidation” about Hawaiian volcanism

Hawaiian volcanoes, which are easily accessed and observed at close range, are among the most studied on the planet and have spurred great advances in the geosciences, from understanding deep Earth processes to forecasting volcanic eruptions. More than a century of continuous observation and study of Hawai‘i's volcanoes has also sharpened focus on those questions that remain unanswered. Although there is good evidence that volcanism in Hawai‘i is the result of a high-temperature upwelling plume from the mantle, the source composition and dynamics of the plume are controversial. Eruptions at the surface build the volcanoes of Hawai‘i, but important topics, including how the volcanoes grow and collapse and how magma is stored and transported, continue to be subjects of intense research. Forecasting volcanic activity is based mostly on pattern recognition, but determining and predicting the nature of eruptions, especially in serving the critical needs of hazards mitigation, require more realistic models and a greater understanding of what drives eruptive activity. These needs may be addressed by better integration among disciplines as well as by developing dynamic physics- and chemistry-based models that more thoroughly relate the physiochemical behavior of Hawaiian volcanism, from the deep Earth to the surface, to geological, geochemical, and geophysical data.

Hawaii↗

In situ measurements of post-fire debris flows in southern California: Comparisons of the timing and magnitude of 24 debris-flow events with rainfall and soil moisture conditions

Debris flows often occur in burned steeplands of southern California, sometimes causing property damage and loss of life. In an effort to better understand the hydrologic controls on post-fire debris-flow initiation, timing and magnitude, we measured the flow stage, rainfall, channel bed pore fluid pressure and hillslope soil-moisture accompanying 24 debris flows recorded in five different watersheds burned in the 2009 Station and Jesusita Fires (San Gabriel and Santa Ynez Mountains). The measurements show substantial differences in debris-flow dynamics between sites and between sequential events at the same site. Despite these differences, the timing and magnitude of all events were consistently associated with local peaks in short duration (< = 30 min) rainfall intensity. Overall, debris-flow stage was best cross-correlated with time series of 5-min rainfall intensity, and lagged the rainfall by an average of just 5 min. An index of debris-flow volume was also best correlated with short-duration rainfall intensity, but found to be poorly correlated with storm cumulative rainfall and hillslope soil water content. Post-event observations of erosion and slope stability modeling suggest that the debris flows initiated primarily by processes related to surface water runoff, rather than shallow landslides. By identifying the storm characteristics most closely associated with post-fire debris flows, these measurements provide valuable guidance for warning operations and important constraints for developing and testing models of post-fire debris flows. copyright. 2011 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗

Methods for synthesis of some jarosites

Experimental procedures in this report summarize attempts to synthesize potassium-, hydronium-, sodium-, and mixed-composition (hydronium-bearing) jarosites. After experimentation, some acceptable combinations of chemical and physical factors were found to routinely synthesize chemically different jarosites, which were used as part of a characterization study of some natural and synthetic jarosites. Jarosite is a sulfate mineral that is common in geologic settings where iron sulfide minerals such as pyrite or marcasite are subject to oxidative weathering. The presence of jarosite is a hallmark of acidic conditions. Jarosite forms as a secondary mineral in weathered sulfidic ores, coal mine wastes, on oxidizing mine wastes, and in streams affected by acid mine drainage. Jarosite also forms in acid-sulfate soils, as an alteration product of sulfidic shales, and in hydrothermal environments. Because of its important role in earth surface processes, the USGS is conducting mineralogical, geochemical, and remote sensing studies to characterize natural jarosites and to elucidate its stability range and conditions of formation. The presence of jarosite is not limited to the Earth. The recent identification of jarosite in the rocks at the Meridiani Planum on Mars has given planetary geologists reason to think that jarosite may be evidence of relict lacustrine (lake systems) or hydrothermal (water enriched magma emanations) systems on the Martian surface. USGS scientists are currently developing jarosite detection systems that can be placed on orbiting spectrometers. One day these systems may guide Mars landers to sites abundant in jarosite, sites most likely to have sheltered ancient Martian life.

Techniques and Methods↗

Development of partial rock veneers by root throw in a subalpine setting

Rock veneers stabilize hillslope surfaces, occur especially in areas of immature soil, and form through a variety of process sets that includes root throw. Near Westcliffe, Colorado, USA, data were collected from a 20 ?? 500 m transect on the east slope of the Sangre de Cristo Mountains. Ages of pit/mound complexes with rock fragments exposed at the surface by root throw ranged from recent (freshly toppled tree) to unknown (complete tree decay). Calculations based on dimensions of the pit/mound complexes, estimated time of free topppling, sizes of exposed rock fragments, and percentage rock covers at pit/mound complexes, as well as within the transect area, indicate that recent rates of root throw have resulted in only partial rock veneering since late Pleistocene deglaciation. Weathering of rock fragments prevent development of an extensive rock veneer and causes a balance, achieved within an estimated 700 years, between the rates of rock-fragment exposure by root throw and clast disintegration by chemical reduction. The estimated rate of rock-fragment reduction accounts for part of the fluvial sediment yields observed for forested subalpine areas of western North America. Copyright ?? 2005 John Wiley & Sons, Ltd.

Earth Surface Processes and Landforms↗

Investigating the influence of climate and volcanic surface aging on fluvial erosion: A case study of Réunion Island, Indian Ocean

Precipitation is one of the dominant drivers of landscape erosion and evolution; however, the effects of typical rainfall compared with less frequent, high-magnitude precipitation events on erosion remain unclear. Volcanic islands are ideal locations to study such phenomena due to their simple geometries, nontectonic construction, and strong spatiotemporal rainfall gradients. However, spatial variation in surface age, created during their construction, often complicates their degradation histories by introducing temporal changes in erosion rates as drainage networks develop. Réunion Island (western Indian Ocean) presents a clear example of this, with an east–west gradient in both surface age and mean annual precipitation, as well as infrequent cyclones that alter the background rainfall pattern. In this study, we analyze the effects of surface age, average rainfall, and rainfall variability on basin development and fluvial erosion across the island. We calculate basin-averaged values of basin morphology, age, precipitation, river discharge, eroded volumes, and erosion rates, and use these to analyze the dominant drivers of landscape evolution through a series of correlation analyses. Our results indicate a temporal dependence on the influence of precipitation, with young surfaces being dominantly eroded by high-rainfall events and older surfaces eroded by mean annual rainfall patterns. Furthermore, we show that drainage development of shield volcanoes follows similar trends to other volcano types, and suggest that surface permeability and groundwater structure are important controls on runoff-driven erosion on shield volcanoes. These results add new components to the question of how precipitation impacts erosion.

Réunion Island↗

Dating methods

One of the greatest contributions of geochemistry to man's knowledge of the Earth and solar system has been the development and application of chemical and isotopic techniques used to measure the passage of time. Rates of geologic processes, rates of biological evolution, and contemporaneity of past events all depend on accurate ages of geologic materials. Many geochemical methods have been used to determine ages of rocks and minerals; the ages determined may record the time of mineral crystallization or recrystallization, the time of last heating beyond a given temperature (see Geothermometers ), or the time elapsed since exposure on the surface. The basic requirement for a chemical or isotopic geochronometer is some measurable parameter that changes as a function of time. Furthermore, for accurate ages to be determined, the parameter must have a known (and invariant) relationship with age or must be able to be calibrated.

Book chapter↗

The application of ensemble wave forcing to quantify uncertainty of shoreline change predictions

Reliable predictions and accompanying uncertainty estimates of coastal evolution on decadal to centennial time scales are increasingly sought. So far, most coastal change projections rely on a single, deterministic realization of the unknown future wave climate, often derived from a global climate model. Yet, deterministic projections do not account for the stochastic nature of future wave conditions across a variety of temporal scales (e.g., daily, weekly, seasonally, and interannually). Here, we present an ensemble Kalman filter shoreline change model to predict coastal erosion and uncertainty due to waves at a variety of time scales. We compare shoreline change projections, simulated with and without ensemble wave forcing conditions by applying ensemble wave time series produced by a computationally efficient statistical downscaling method. We demonstrate a sizable (site-dependent) increase in model uncertainty compared with the unrealistic case of model projections based on a single, deterministic realization (e.g., a single time series) of the wave forcing. We support model-derived uncertainty estimates with a novel mathematical analysis of ensembles of idealized process models. Here, the developed ensemble modeling approach is applied to a well-monitored beach in Tairua, New Zealand. However, the model and uncertainty quantification techniques derived here are generally applicable to a variety of coastal settings around the world.

JGR Earth Surface↗

Chalcopyrite—bearer of a precious, non-precious metal

The mineral chalcopyrite (CuFeS 2 ) is the world's most abundant source of copper, a metal component in virtually every piece of electrical equipment. It is the main copper mineral in several different ore deposit types, the most important of which are porphyry deposits. Chalcopyrite is unstable at the Earth's surface, so it weathers from sulphide outcrops and mine waste piles, contributing acid and dissolved copper to what is known as acid rock drainage. If not prevented, dissolved copper from chalcopyrite weathering will be transported downstream, potentially harming ecosystems along the way. Pristine areas are becoming targets for future copper supply as we strive to meet ever-increasing demands for copper by developed and developing nations. Additionally, our uses for copper are expanding to include technology such as solar energy production. This has lead to the processing of increasingly lower grade ores, which is possible, in part, due to advances in bio-leaching (i.e. metal extraction catalysed by micro-organisms). Although copper is plentiful, it is still a nonrenewable resource. Future copper supply promises to fall short of demand and the volatility of the copper market may continue if we do not prioritize copper use and improve copper recycling and ore extraction efficiency.

Geology Today↗

Using the Model Coupling Toolkit to couple earth system models

Continued advances in computational resources are providing the opportunity to operate more sophisticated numerical models. Additionally, there is an increasing demand for multidisciplinary studies that include interactions between different physical processes. Therefore there is a strong desire to develop coupled modeling systems that utilize existing models and allow efficient data exchange and model control. The basic system would entail model "1" running on "M" processors and model "2" running on "N" processors, with efficient exchange of model fields at predetermined synchronization intervals. Here we demonstrate two coupled systems: the coupling of the ocean circulation model Regional Ocean Modeling System (ROMS) to the surface wave model Simulating WAves Nearshore (SWAN), and the coupling of ROMS to the atmospheric model Coupled Ocean Atmosphere Prediction System (COAMPS). Both coupled systems use the Model Coupling Toolkit (MCT) as a mechanism for operation control and inter-model distributed memory transfer of model variables. In this paper we describe requirements and other options for model coupling, explain the MCT library, ROMS, SWAN and COAMPS models, methods for grid decomposition and sparse matrix interpolation, and provide an example from each coupled system. Methods presented in this paper are clearly applicable for coupling of other types of models. ?? 2008 Elsevier Ltd. All rights reserved.

Environmental Modelling and Software↗

Improving the operational simplified surface energy balance evapotranspiration model using the forcing and normalizing operation

Actual evapotranspiration modeling is providing useful information for researchers and resource managers in agriculture and water resources around the world. The performance of models depends on the accuracy of forcing inputs and model parameters. We developed an improved approach to the parameterization of the Operational Simplified Surface Energy Balance (SSEBop) model using the Forcing and Normalizing Operation (FANO). SSEBop has two key model parameters that define the model boundary conditions. The FANO algorithm computes the wet-bulb boundary condition using a linear FANO Equation relating surface temperature, surface psychrometric constant, and the Normalized Difference Vegetation Index (NDVI). The FANO parameterization was implemented on two computing platforms using Landsat and gridded meteorological datasets: (1) Google Earth Engine (GEE) and (2) Earth Resources Observation and Science (EROS) Center Science Processing Architecture (ESPA). Evaluation was conducted by comparing modeled actual evapotranspiration ( ETa ) estimates with AmeriFlux eddy covariance (EC) and water balance ETa from level-8 Hydrologic Unit Code sub-basins in the conterminous United States. FANO brought substantial improvements in model accuracy and operational implementation. Compared to the earlier version (v0.1.7), SSEBop FANO (v0.2.6) reduced grassland bias from 47% to −2% while maintaining comparable bias for croplands (11% versus −7%) against EC data. A water balance-based ETa bias evaluation showed an overall improvement from 7% to −1%. Climatology versus annual gridded reference evapotranspiration ( ETr ) produced comparable ETa results, justifying the use of climatology ETr for the global SSEBop Landsat ETa that is accessible through the ESPA website. Besides improvements in model accuracy, SSEBop FANO increases the spatiotemporal coverage of ET modeling due to the elimination of high NDVI requirements for model parameterization. Because of the existence of potential biases from forcing inputs and model parameters, continued evaluation and bias corrections are necessary to improve the absolute magnitude of ETa for localized water budget applications.

Remote Sensing↗