Search USGS⌕ Search

SEARCH · Search USGS

Results for “Clay Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2024

Chemical and mineralogical characteristics of French green clays used for healing

The worldwide emergence of infectious diseases, together with the increasing incidence of antibiotic-resistant bacteria, elevate the need to properly detect, prevent, and effectively treat these infections. The overuse and misuse of common antibiotics in recent decades stimulates the need to identify new inhibitory agents. Therefore, natural products like clays, that display antibacterial properties, are of particular interest. The absorptive properties of clay minerals are well documented for healing skin and gastrointestinal ailments. However, the antibacterial properties of clays have received less scientific attention. French green clays have recently been shown to heal Buruli ulcer, a necrotic or ‘flesh-eating’ infection caused by Mycobacterium ulcerans . Assessing the antibacterial properties of these clays could provide an inexpensive treatment for Buruli ulcer and other skin infections. Antimicrobial testing of the two clays on a broad-spectrum of bacterial pathogens showed that one clay promotes bacterial growth (possibly provoking a response from the natural immune system), while another kills bacteria or significantly inhibits bacterial growth. This paper compares the mineralogy and chemical composition of the two French green clays used in the treatment of Buruli ulcer. Mineralogically, the two clays are dominated by 1 Md illite and Fe-smectite. Comparing the chemistry of the clay minerals and exchangeable ions, we conclude that the chemistry of the clay, and the surface properties that affect pH and oxidation state, control the chemistry of the water used to moisten the clay poultices and contribute the critical antibacterial agent(s) that ultimately debilitate the bacteria.

Clays and Clay Minerals↗
USGS1994

Effects of sediment depositional environment and ground-water flow on the quality and geochemistry of water in aquifers in sediments of Cretaceous age in the coastal plain of South Carolina

The quality and geochemistry of ground water are significantly affected by the depositional environment of aquifer sediments. Cretaceous sediments in the Coastal Plain of South Carolina have been deposited in fluvial, delta-plain, marginal-marine, and marine environments. Depositional environments of sediments within a single aquifer may grade from nonmarine, fluvial, or upper delta plain near the updip limit of the aquifer to transitional, lower delta plain and to marine toward the coast. In nonmarine sediments the major source of inorganic carbon in the water is the decomposition of organic material. The major aqueous geochemical processes are the dissolution and alteration of silicate minerals. Silica makes up a major part of the dissolved constituents in water from these sediments. In transitional and marine sediments the major aqueous geochemical processes are (1) the dissolution of calcium carbonate by hydrolysis and by carbonic acid derived from the decomposition of organic material and (2) the exchange of calcium in solution for sodium on the marine-clay minerals. The clay minerals may also serve as buffers by neutralizing the hydroxyl ion produced by hydrolysis. The effects of incompletely flushed dilute saltwater on water quality increase toward the coast and toward the northeast.

South Carolina↗
USGS2022

Bedrock geochemistry and alteration history of the clay-bearing Glen Torridon region of Gale crater, Mars

Glen Torridon is a topographic trough located on the slope of Aeolis Mons, Gale crater, Mars. It corresponds to what was previously referred to as the “clay-bearing unit”, due to the relatively strong spectral signatures of clay minerals (mainly ferric smectites) detected from orbit. Starting in January 2019, the Curiosity rover explored Glen Torridon for more than 700 sols (Martian days). The objectives of this campaign included acquiring a detailed understanding of the geologic context in which the clay minerals were formed and determining the intensity of aqueous alteration experienced by the sediments. Here, we present the major-element geochemistry of the bedrock as analyzed by the ChemCam instrument. Our results reveal that the two main types of bedrock exposures identified in the lower part of Glen Torridon are associated with distinct chemical compositions (K-rich and Mg-rich), for which we are able to propose mineralogical interpretations. Moreover, the topmost stratigraphic member exposed in the region displays a stronger diagenetic overprint, especially at two locations close to the unconformable contact with the overlying Stimson formation, where the bedrock composition significantly deviates from the rest of Glen Torridon. Overall, the values of the Chemical Index of Alteration determined with ChemCam are elevated by Martian standards, suggesting the formation of clay minerals through open system weathering. However, there is no indication that the alteration was stronger than in some terrains previously visited by Curiosity , which in turn implies that the enhanced orbital signatures are mostly controlled by non-compositional factors.

Journal of Geophysical Research E: Planets↗
USGS2010

Petrography, mineralogy, and geochemistry of deep gravelly sands in the Eyreville B core, Chesapeake Bay impact structure

The ICDP–USGS Eyreville drill cores in the Chesapeake Bay impact structure reached a total depth of 1766 m and comprise (from the bottom upwards) basement-derived schists and granites/pegmatites, impact breccias, mostly poorly lithified gravelly sand and crystalline blocks, a granitic slab, sedimentary breccias, and postimpact sediments. The gravelly sand and crystalline block section forms an approximately 26 m thick interval that includes an amphibolite block and boulders of cataclastic gneiss and suevite. Three gravelly sands (basal, middle, and upper) are distinguished within this interval. The gravelly sands are poorly sorted, clast supported, and generally massive, but crude size-sorting and subtle, discontinuous layers occur locally. Quartz and K-feldspar are the main sand-size minerals and smectite and kaolinite are the principal clay minerals. Other mineral grains occur only in accessory amounts and lithic clasts are sparse (only a few vol%). The gravelly sands are silica rich (~80 wt% SiO 2 ). Trends with depth include a slight decrease in SiO 2 and slight increase in Fe 2 O 3 . The basal gravelly sand (below the cataclasite boulder) has a lower SiO 2 content, less K-feldspar, and more mica than the higher sands, and it contains more lithic clasts and melt particles that are probably reworked from the underlying suevite. The middle gravelly sand (below the amphibolite block) is finer-grained, contains more abundant clay minerals, and displays more variable chemical compositions than upper gravelly sand (above the block). Our mineralogical and geochemical results suggest that the gravelly sands are avalanche deposits derived probably from the nonmarine Potomac Formation in the lower part of the target sediment layer, in contrast to polymict diamictons higher in the core that have been interpreted as ocean-resurge debris flows, which is in agreement with previous interpretations. The mineralogy and geochemistry of the gravelly sands are typical for a passive continental margin source. There is no discernible mixing with marine sediments (no glauconite or Paleogene marine microfossils noted) during the impact remobilization and redeposition. The unshocked amphibolite block and cataclasite boulder might have originated from the outer parts of the transient crater.

Virginia↗
USGS1964

Minor-element composition and organic carbon content of marine and nonmarine shales of Late Cretaceous age in the western interior of the United States

The composition of nonmarine shales of Cretaceous age that contain less than 1 per cent organic carbon is assumed to represent the inherited minor-element composition of clayey sediments delivered to the Cretaceous sea that occupied the western interior region of North America. Differences in minor-element content between these samples and samples of 1. (a) nonmarine carbonaceous shales (1 to 17 per cent organic carbon), 2. (b) nearshore marine shales (less than 1 per cent organic carbon), and 3. (c) offshore marine shales (as much as 8 per cent organic carbon), all of the same age, reveal certain aspects of the role played by clay minerals and organic materials in affecting the minor-element composition of the rocks. The organic carbon in the nonmarine rocks occurs in disseminated coaly plant remains. The organic carbon in the marine rocks occurs predominantly in humic material derived from terrestrial plants. The close similarity in composition between the organic isolates from the marine samples and low-rank coal suggests that the amount of marine organic material in these rocks is small. The minor-element content of the two kinds of nonmarine shales is the same despite the relatively large amount of organic carbon in the carbonaceous shales. The nearshore marine shales, however, contain larger median amounts of arsenic, boron, chromium, vanadium and zinc than do the nonmarine rocks; and the offshore marine shales contain even larger amounts of these elements. Cobalt, molybdenum, lead and zirconium show insignificant differences in median content between the nonmarine and marine rocks, although as much as 25 ppm molybdenum is present in some offshore marine samples. The gallium content is lower in the marine than in the nonmarine samples. Copper and selenium contents of the two kinds of nonmarine rocks and the nearshore marine samples are the same, but those of the offshore samples are larger. In general, arsenic, chromium, copper, molybdenum, selenium, vanadium and zinc are concentrated in those offshore marine samples having the largest amounts of organic carbon, but samples with equal amounts of vanadium, for instance, may differ by a factor of 3 in their amount of organic carbon. Arsenic and molybdenum occur in some samples chiefly in syngenetic pyrite but also are present in relatively large amounts in samples that contain little pyrite. The data on nonmarine carbonaceous shales indicate that organic matter of terrestrial origin in marine shales contributes little to the minor-element content of such rocks. It is possible that marine organic matter, even though seemingly small in amount in marine shales, contributes to the minor-element composition of the shales. In addition to any such contribution, however, the great effectiveness in sorption processes of humic materials in conjunction with clay minerals suggests that such processes must have played an important role as these materials moved from the relatively dilute solutions of the nonmarine environment to the relatively concentrated solution of sea water. The volumes of sea water sufficient to supply for sorption the amounts of most minor elements in the offshore marine samples are insignificant compared to the volumes of water with which the clay and organic matter were in contact during their transportation and sedimentation. Consequently, the chemical characteristics of the environment in which the clay minerals and organic matter accumulated and underwent diagenesis probably were the most important factors in controlling the degree to which sorption processes and the formation of syngenetic minerals affected the final composition of the rocks.

Geochimica et Cosmochimica Acta↗
USGS1988

U.S. Geological survey program on toxic waste--ground-water contamination; proceedings of the Second technical meeting, Cape Cod, Massachusetts, October 21-25, 1985

This study characterizes the clay minerals in sediments associated with a plume of creosote-contaminated groundwater. The plume of contaminated groundwater near Pensacola, FL, is in shallow, permeable, Miocene to Holocene quartz sand and flows southward toward Pensacola Bay. Clay-size fractions were separated from 41 cores, chiefly split-spoon samples at 13 drill sites. The most striking feature of the chemical analyses of the clay fractions from uncontaminated site 2 and contaminated sites 4,5,6, and 7 is the variability of iron oxide (species in some samples as Fe2O3); total iron oxide abundance is lowest (2.5%) in uncontaminated sample 2-40, but is > 4.5% (4.5 to 8.5%) in the remaining assemblages. One feature suggesting interaction between the indigenous clays and the waste plume is the presence of nontronite-rich smectite. Nontronite commonly has been identified as the product of hydrothermal alteration and deep-sea weathering of submarine basalts; it is not a common constituent of Cenozoic Gulf Coast sediments. At the Pensacola site, relatively abundant nontronitic smectite is confined to contaminated sands or associated muds; it is least abundant or absent in sands and muds peripheral to the waste plume. The geochemistry of the waste plume, its substantial dissolved, (chiefly ferrous iron), mildly acidic (pH 5-6), and low redox composition, provides an environment similar to that previously determined for the low-temperature synthesis of nontronite. Data from clay-size fractions confirm conclusions that neoformed pyrite in some grain coatings occurs in an assemblage with excess iron over that required in the pyrite. Continuing studies to evaluate these tentative conclusions include: (1) chemical analysis of clay fractions from remaining sites to further examine the apparent relation between iron content and abundance of nontronitic smectite; (2) clay separation and analysis, and pore fluid extraction (squeezing or ultracentrifugation) and analysis from a continuous core through the mud lens to determine pore fluid composition (presence or absence of waste fluid), and character of associated clay minerals; and (3) clay separation and analysis in both permeable sands and the intervening mud lens that are clearly outside the limits of the waste plume to further document the effects of the plume. (See also W90-00022) (Lantz-PTT)

Open-File Report↗
USGS1973

Ultrafiltration by a compacted clay membrane-II. Sodium ion exclusion at various ionic strengths

Several recent laboratory studies and field investigations have indicated that shales and compacted clay minerals behave as semipermeable membranes. One of the properties of semipermeable membranes is to retard or prevent the passage of charged ionic species through the membrane pores while allowing relatively free movement of uncharged species. This phenomenon is termed salt filtering, reverse osmosis, or ultrafiltration. This paper shows how one can proceed from the ion exchange capacity of clay minerals and, by means of Donnan membrane equilibrium concept and the Teorell-Meyer-Siever theory, develop a theory to explain why and to what extent ultrafiltration occurs when solutions of known concentration are forced to flow through a clay membrane. Reasonable agreement between theory and laboratory results were found. The concentration of the ultrafiltrate was always greater than predicted because of uncertainty in values of some parameters in the equations. Ultrafiltration phenomena may be responsible for the formation of some subsurface brines and mineral deposits. The effect should also be taken into consideration in any proposal for subsurface waste emplacement in an environment containing large quantities of clay minerals.

Geochimica et Cosmochimica Acta↗
USGS1995

Uraniferous waters of the Arkansas River valley, Colorado, U.S.A.: A function of geology and land use

The effect of local geology and land-use practices on dissolved U was investigated by analysis of surface water and some springs in the Arkansas River valley of southeastern Colorado. Water samples were collected during a 2 week period in April, 1991. The rate of increase of U concentration with distance downriver increased markedly as the river flowed from predominantly undeveloped lands underlain by igneous and metamorphic rocks to agriculturally developed lands underlain by marine shale and limestone. An additional abrupt increase in dissolved U was observed along the section of river where discharge is often greatly reduced because of extensive diversions for irrigation and where remaining flow is largely composed of irrigation return water. Dissolved U in this last section of river and in most of its tributaries exceeded the proposed U.S. drinking water standard of 20 μ/L In water samples collected from agricultural areas dissolved U showed strong positive correlation with major dissolved constituents Na, Ca, Mg, and SO 4 that increase as a result of sulfate mineral dissolution and clay mineral ion-exchange reactions in weathered shale bedrock and shaley soils. Highly soluble minor and trace elements Cl, Li, B, Sr, and Se that are not subject to strong sorptive uptake or precipitation in this setting also correlated positively with U. These combined observations indicate that natural leaching of U-bearing shale bedrock and derivative soils, additional leaching of rock and soil by irrigation water, and evaporative concentration in a semi-arid climate can produce concentrations of dissolved U in surface water and shallow ground water that may threaten nearby drinking water supplies. Other agriculturally developed areas of the semi-arid Western U.S. with similar geology are likely to contain high concentrations of U in irrigation drain water.

Colorado↗
USGS2011

Soil clay content underlies prion infection odds

Environmental factors—especially soil properties—have been suggested as potentially important in the transmission of infectious prion diseases. Because binding to montmorillonite (an aluminosilicate clay mineral) or clay-enriched soils had been shown to enhance experimental prion transmissibility, we hypothesized that prion transmission among mule deer might also be enhanced in ranges with relatively high soil clay content. In this study, we report apparent influences of soil clay content on the odds of prion infection in free-ranging deer. Analysis of data from prion-infected deer herds in northern Colorado, USA, revealed that a 1% increase in the clay-sized particle content in soils within the approximate home range of an individual deer increased its odds of infection by up to 8.9%. Our findings suggest that soil clay content and related environmental properties deserve greater attention in assessing risks of prion disease outbreaks and prospects for their control in both natural and production settings.

Colorado↗
USGS2022

Late Paleoproterozoic to early Mesoproterozoic deposition of quartz arenites across southern Laurentia

Supermature siliciclastic sequences were deposited between 1.64 Ga and 1.59 Ga over a broad swath of southern Laurentia in the Archean, Penokean, Yavapai, and Mazatzal Provinces. These siliciclastic sequences are notable for their extreme mineralogical and chemical maturity, being devoid of detrital feldspar and ferromagnesian minerals, containing the clay mineral kaolinite (or its metamorphic equivalent, pyrophyllite), and having a chemical index of alteration >95. Such maturity is the result of a perfect confluence of tectonic and climatic conditions, including a stable continental crust with low topographic relief (the Archean, Penokean, and Yavapai Provinces ca. 1.70 Ga), a warm humid climate, an elevated level of atmospheric CO 2 , and relatively acidic pore fluids in the critical zone. The weathered detritus was transported and deposited by southward-flowing streams across the Archean, Penokean, and Yavapai Provinces, ultimately to be deposited on 1.66 Ga volcanic and volcaniclastic rocks in the Mazatzal continental arc along the southern margin of Laurentia.

Laurentia↗
USGS1975

Lithium in sediments and brines--how, why and where to search

The possibility of using lithium in batteries to power electric vehicles and as fuel for thermonuclear power has focused attention on the limited resources of lithium other than in pegmatite minerals. The Clayton Valley, Nev., subsurface lithium brine has been the major source of lithium carbonate since about 1967, but the life of this brine field is probably limited to several more decades at the present rate of production. Lithium is so highly soluble during weathering and in sedimentary environments that no lithium-rich sedimentary minerals other than clays have been identified to date. The known deposits of lithium, such as the clay mineral hectorite and the lithium-rich brines, occur in closed desert basins of the Southwest in association with nonmarine evaporites. However, the ultimate source for the lithium in these deposits may be from hydrothermal solutions. The search for previously unreported deposits of nonpegmatitic lithium should consider its probable association, not only with nonmarine evaporite minerals, but also with recent volcanic and tectonic activity, as well as with deposits of boron, beryllium, fluorine, manganese, and possibly phosphate.

Journal of Research of the U.S. Geological Survey↗
USGS2002

Trace element abundances in major minerals of Late Permian coals from southwestern Guizhou province, China

Fourteen samples of minerals were separated by handpicking from Late Permian coals in southwestern Guizhou province, China. These 14 minerals were nodular pyrite, massive recrystallized pyrite, pyrite deposited from low-temperature hydrothermal fluid and from ground water; clay minerals; and calcite deposited from low-temperature hydrothermal fluid and from ground water. The mineralogy, elemental composition, and distribution of 33 elements in these samples were studied by optical microscopy, scanning electron microscope equipped with energy-dispersive X-ray spectrometer (SEM-EDX), X-ray diffraction (XRD), cold-vapor atomic absorption spectrometry (CV-AAS), atomic fluorescence spectrometry (AFS), inductively coupled-plasma mass spectrometry (ICP-MS), and ion-selective electrode (ISE). The results show that various minerals in coal contain variable amounts of trace elements. Clay minerals have high concentrations of Ba, Be, Cs, F, Ga, Nb, Rb, Th, U, and Zr. Quartz has little contribution to the concentration of trace elements in bulk coal. Arsenic, Mn, and Sr are in high concentrations in calcite. Pyrite has high concentrations of As, Cd, Hg, Mo, Sb, Se, Tl, and Zn. Different genetic types of calcite in coal can accumulate different trace elements; for example Ba, Co, Cr, Hg, Ni, Rb, Sn, Sr, and Zn are in higher concentrations in calcite deposited from low-temperature hydrothermal fluid than in that deposited from ground water. Furthermore, the concentrations of some trace elements are quite variable in pyrite; different genetic types of pyrites (Py-A, B, C, D) have different concentrations of trace elements, and the concentrations of trace elements are also different in pyrite of low-temperature hydrothermal origin collected from different locations. The study shows that elemental concentration is rather uniform in a pyrite vein. There are many micron and submicron mosaic pyrites in a pyrite vein, which is enriched in some trace elements, such as As and Mo. The content of trace element in pyrite vein depends upon the content of mosaic pyrite and of trace elements in it. Many environmentally sensitive trace elements are mainly contained in the minerals in coal, and hence the physical coal cleaning techniques can remove minerals from coal and decrease the emissions of potentially hazardous trace elements. ?? 2002 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology↗
USGS1974

Chemical weathering of serpentinite in the eastern Piedmont of Maryland

Weathering processes in a small watershed (Soldiers Delight) underlain by Serpentinite in the Piedmont of Maryland were studied by means of a mass balance technique and were compared with the processes operative in a watershed uncertain by schist. The two terranes are downwasting at a rate of 2.4 m per m.y., but chemical weathering much more strongly affects the Serpentinite (2.2 m per m.y.) than the schist (1.2 m per m.y.). The serpentinite lacks a saprolite cover because resistate minerals are absent and alumina in the bedrock is scarce. In contrast, the schist contains both quartz and a source of alumina in the alumino-silicate minerals and, as a result, has a thick saprolite mantle. Relatively small amounts of secondary quartz, chalcedony, and 14Å clay minerals are synthesized in the serpentinite watershed, but relatively large amounts of gibbsite and clay minerals (kaolinite and vermiculite) are formed during the weathering of the schist. The hydrologic consequences in the serpentinite terrane compared with the schist watershed are increased flood-flow discharge, greater fluctuation in seasonal, instantaneous base-flow discharge, and pronounced seasonal fluctuations in total discharge. The serpentinite stream water averaged 205 ppm of total dissolved solids in the base flow compared to 25 ppm in the schist. Stream water from the serpentinite is of the magnesium bicarbonate type; that from the schist is sodium-calcium bicarbonate type. On the serpentinite, substantial land-surface reduction (denudation) is effected by chemical weathering; mechanical weathering is secondary. On the schist terrane, mechanical weathering is the primary agent that lowers the land surface, even though chemical weathering has reduced the rock mass ay almost one-half. © 1974 Geological Society of America.

Geological Society of America Bulletin↗
USGS1984

Hydrothermal minerology of research drill hole Y-3, Yellowstone National Park, Wyoming

The approximate paragenetic sequence of hydrothermal minerals in the Y-3 U. S. Geological Survey research diamond-drill hole in Lower Geyser Basin, Yellowstone National Park, Wyoming, is: hydrothermal chalcedony, hematite, pyrite, quartz, clay minerals (smectite and mixed-layer illite-smectite), calcite, chlorite, fluorite, pyrite, quartz, zeolite minerals (analcime, dachiardite, laumontite, stilbite, and yugawaralite), and clay minerals (smectite and mixed-layer illite-smectite). A few hydrothermal minerals that were identified in drill core Y-3 (lepidolite, aegirine, pectolite, and truscottite) are rarely found in modern geothermal areas. The alteration minerals occur primarily as vug and fracture fillings that were deposited from cooling thermal water. Refs.

Wyoming↗
USGS2018

Geochemical investigation of weathering processes in a forested headwater catchment: Mass-balance weathering fluxes

Geochemical research on natural weathering has often been directed towards explanations of the chemical composition of surface water and ground water resulting from subsurface water-rock interactions. These interactions are often defined as the incongruent dissolution of primary silicates, such as feldspar, producing secondary weathering products, such as clay minerals and oxyhydroxides, and solute fluxes (Meunier and Velde, 1979). The chemical composition of the clay-mineral product is often ignored. However, in earlier investigations, the saprolitic weathering profile at the South Fork Brokenback Run (SFBR) watershed, Shenandoah National Park, Virginia, was characterized extensively in terms of its mineralogical and chemical composition (Piccoli, 1987; Pochatila et al., 2006; Jones et al., 2007) and its basic hydrology. O'Brien et al. (1997) attempted to determine the contribution of primary mineral weathering to observed stream chemistry at SFBR. Mass-balance model results, however, could provide only a rough estimate of the weathering reactions because idealized mineral compositions were utilized in the calculations. Making use of detailed information on the mineral occurrence in the regolith, the objective of the present study was to evaluate the effects of compositional variation on mineral-solute mass-balance modelling and to generate plausible quantitative weathering reactions that support both the chemical evolution of the surface water and ground water in the catchment, as well as the mineralogical evolution of the weathering profile. ?? 2008 The Mineralogical Society.

Conference Paper↗
USGS2010

Chemical and textural controls on phosphorus mobility in drylands of southeastern Utah

We investigated several forms of phosphorus (P) in dryland soils to examine the chemical and textural controls on P stabilization on a diverse set of substrates. We examined three P fractions including labile, moderately labile, and occluded as determined by a modified Hedley fractionation technique. The P fractions were compared to texture measurements and total elemental concentrations determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). Labile P related to the absence of materials involved in P sorption. Moderately labile P was most strongly associated with high total Al & Fe content that we interpret to represent oxides and 1:1 clay minerals. The occluded P fraction was strongly associated with low total Al & Fe environments and interpreted to represent 2:1 clay minerals where ligand exchange tightly sequesters P. The results indicate that the controls on P fraction distribution are initially closely tied to the chemical and physical properties of the bedrock units that contribute to soil formation. Further, these results suggest that the progression of stabilized P forms in dryland areas differs from the progression observed in mesic environments. Soil development in dryland settings, such as the formation of pedogenic carbonates, may lead to differing controls on P availability and the proportional size of the moderately labile fraction.

Utah↗
USGS1990

Ostwald ripening of clays and metamorphic minerals

Analyses of particle size distributions indicate that clay minerals and other diagenetic and metamorphic minerals commonly undergo recrystallization by Ostwald ripening. The shapes of their particle size distributions can yield the rate law for this process. One consequence of Ostwald ripening is that a record of the recrystallization process is preserved in the various particle sizes. Therefore, one can determine the detailed geologic history of clays and other recrystallized minerals by separating, from a single sample, the various particle sizes for independent chemical, structural, and isotopic analyses.

Science↗
USGS2011

Vadose zone controls on weathering intensity and depth: Observations from grussic saprolites

An investigation of vadose zone weathering processes has been undertaken on grussic saprolites developed on Californian granitoids. Preliminary results indicate strong climatic control, through infiltration, on the depth and intensity of weathering. At sites with higher infiltration, the vadose zone is comprehensively altered to grussic saprolite and saprock. Conversely, lower infiltration sites display only thin grussic saprolites, strongly influenced by rock texture. Both vadose zone and weathering depth appear to be governed by local base level, and vadose zone hydrology exerts a fundamental control on the effective operation and relative dominance of the key weathering reactions. In zones of matrix permeability, oxidation of biotite comprehensively disaggregates the rock but results in little mass loss and clay mineral formation. Conversely, the higher transient flow rates that characterize zones of fracture permeability result in plagioclase hydrolysis, significant mass losses and accompanying clay mineral formation. A variable hydrological regime may also contribute to high partial pressures of O 2 in vadose zone pore waters and pore spaces, thereby enhancing the oxidative environment and further predisposing grussic saprolite formation.

Applied Geochemistry↗