Search USGS⌕ Search

SEARCH · Search USGS

Results for “California Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
USGS2012

Geohydrology of Big Bear Valley, California: phase 1--geologic framework, recharge, and preliminary assessment of the source and age of groundwater

The Big Bear Valley, located in the San Bernardino Mountains of southern California, has increased in population in recent years. Most of the water supply for the area is pumped from the alluvial deposits that form the Big Bear Valley groundwater basin. This study was conducted to better understand the thickness and structure of the groundwater basin in order to estimate the quantity and distribution of natural recharge to Big Bear Valley. A gravity survey was used to estimate the thickness of the alluvial deposits that form the Big Bear Valley groundwater basin. This determined that the alluvial deposits reach a maximum thickness of 1,500 to 2,000 feet beneath the center of Big Bear Lake and the area between Big Bear and Baldwin Lakes, and decrease to less than 500 feet thick beneath the eastern end of Big Bear Lake. Interferometric Synthetic Aperture Radar (InSAR) was used to measure pumping-induced land subsidence and to locate structures, such as faults, that could affect groundwater movement. The measurements indicated small amounts of land deformation (uplift and subsidence) in the area between Big Bear Lake and Baldwin Lake, the area near the city of Big Bear Lake, and the area near Sugarloaf, California. Both the gravity and InSAR measurements indicated the possible presence of subsurface faults in subbasins between Big Bear and Baldwin Lakes, but additional data are required for confirmation. The distribution and quantity of groundwater recharge in the area were evaluated by using a regional water-balance model (Basin Characterization Model, or BCM) and a daily rainfall-runoff model (INFILv3). The BCM calculated spatially distributed potential recharge in the study area of approximately 12,700 acre-feet per year (acre-ft/yr) of potential in-place recharge and 30,800 acre-ft/yr of potential runoff. Using the assumption that only 10 percent of the runoff becomes recharge, this approach indicated there is approximately 15,800 acre-ft/yr of total recharge in Big Bear Valley. The INFILv3 model was modified for this study to include a perched zone beneath the root zone to better simulate lateral seepage and recharge in the shallow subsurface in mountainous terrain. The climate input used in the INFILv3 model was developed by using daily climate data from 84 National Climatic Data Center stations and published Parameter Regression on Independent Slopes Model (PRISM) average monthly precipitation maps to match the drier average monthly precipitation measured in the Baldwin Lake drainage basin. This model resulted in a good representation of localized rain-shadow effects and calibrated well to measured lake volumes at Big Bear and Baldwin Lakes. The simulated average annual recharge was about 5,480 acre-ft/yr in the Big Bear study area, with about 2,800 acre-ft/yr in the Big Bear Lake surface-water drainage basin and about 2,680 acre-ft/yr in the Baldwin Lake surface-water drainage basin. One spring and eight wells were sampled and analyzed for chemical and isotopic data in 2005 and 2006 to determine if isotopic techniques could be used to assess the sources and ages of groundwater in the Big Bear Valley. This approach showed that the predominant source of recharge to the Big Bear Valley is winter precipitation falling on the surrounding mountains. The tritium and uncorrected carbon-14 ages of samples collected from wells for this study indicated that the groundwater basin contains water of different ages, ranging from modern to about 17,200-years old.The results of these investigations provide an understanding of the lateral and vertical extent of the groundwater basin, the spatial distribution of groundwater recharge, the processes responsible for the recharge, and the source and age of groundwater in the groundwater basin. Although the studies do not provide an understanding of the detailed water-bearing properties necessary to determine the groundwater availability of the basin, they do provide a framework for the future development of a groundwater model that would help to improve the understanding of the potential hydrologic effects of water-management alternatives in Big Bear Valley.

California↗
USGS2003

Geologic map and digital database of the Yucaipa 7.5’ quadrangle, San Bernardino and Riverside Counties, California

Introduction This geologic database of the Yucaipa 7.5' quadrangle was prepared by the Southern California Areal Mapping Project (SCAMP), a regional geologic-mapping project sponsored jointly by the U.S. Geological Survey and the California Geological Survey. The database was developed as a contribution to the National Cooperative Geologic Mapping Program's National Geologic Map Database, and is intended to provide a general geologic setting of the Yucaipa quadrangle. The database and map provide information about earth materials and geologic structures, including faults and folds that have developed in the quadrangle due to complexities in the San Andreas Fault system. The Yucaipa 7.5' quadrangle contains materials and structures that provide unique insight into the Mesozoic and Cenozoic geologic evolution of southern California. Stratigraphic and structural elements include: (1) strands of the San Andreas Fault that bound far-traveled terranes of crystalline and sedimentary rock; (2) Mesozoic crystalline rocks that form lower and upper plates of the regionwide Vincent-Orocopia Thrust system; and (3) late Tertiary and Quaternary sedimentary materials and geologic structures that formed during the last million years or so and that record complex geologic interactions within the San Andreas Fault system. These materials and the structures that deform them provide the geologic framework for investigations of geologic hazards and ground-water recharge and subsurface flow. Geologic information contained in the Yucaipa database is general-purpose data that is applicable to land-related investigations in the earth and biological sciences. The term "generalpurpose" means that all geologic-feature classes have minimal information content adequate to characterize their general geologic characteristics and to interpret their general geologic history. However, no single feature class has enough information to definitively characterize its properties and origin. For this reason the database cannot be used for site-specific geologic evaluations, although it can be used to plan and guide investigations at the site-specific level.

California↗
USGS2014

Geologic map and upper Paleozoic stratigraphy of the Marble Canyon area, Cottonwood Canyon quadrangle, Death Valley National Park, Inyo County, California

This geologic map and pamphlet focus on the stratigraphy, depositional history, and paleogeographic significance of upper Paleozoic rocks exposed in the Marble Canyon area in Death Valley National Park, California. Bedrock exposed in this area is composed of Mississippian to lower Permian (Cisuralian) marine sedimentary rocks and the Jurassic Hunter Mountain Quartz Monzonite. These units are overlain by Tertiary and Quaternary nonmarine sedimentary deposits that include a previously unrecognized tuff to which we tentatively assign an age of late middle Miocene (~12 Ma) based on tephrochronologic analysis, in addition to the previously recognized Pliocene tuff of Mesquite Spring. Mississippian and Pennsylvanian rocks in the Marble Canyon area represent deposition on the western continental shelf of North America. Mississippian limestone units in the area (Tin Mountain, Stone Canyon, and Santa Rosa Hills Limestones) accumulated on the outer part of a broad carbonate platform that extended southwest across Nevada into east-central California. Carbonate sedimentation was interrupted by a major eustatic sea-level fall that has been interpreted to record the onset of late Paleozoic glaciation in southern Gondwana. Following a brief period of Late Mississippian clastic sedimentation (Indian Springs Formation), a rise in eustatic sea level led to establishment of a new carbonate platform that covered most of the area previously occupied by the Mississippian platform. The Pennsylvanian Bird Spring Formation at Marble Canyon makes up the outer platform component of ten third-order (1 to 5 m.y. duration) stratigraphic sequences recently defined for the regional platform succession. The regional paleogeography was fundamentally changed by major tectonic activity along the continental margin beginning in middle early Permian time. As a result, the Pennsylvanian carbonate shelf at Marble Canyon subsided and was disconformably overlain by lower Permian units (Osborne Canyon and Darwin Canyon Formations) representing part of a deep-water turbidite basin filled primarily by fine-grained siliciclastic sediment derived from cratonal sources to the east. Deformation and sedimentation along the western part of this basin continued into late Permian time. The culminating phase was part of a regionally extensive late Permian thrust system that included the Marble Canyon thrust fault just west of the present map area.

California↗
USGS2018

Framework geologic map and structure sections along the Bartlett Springs fault zone and adjacent area from Round Valley to Wilbur Springs, northern Coast Ranges, California

The geologic map and accompanying report describes the extent, complexity, architecture, and evolution of the Bartlett Springs Fault Zone between Clear Lake and Round Valley, California. This fault zone is the eastern-most known active member of the San Andreas transform margin in northern California. It is of particular interest for its apparent long-lived history as a Miocene and older subduction-margin fault that, more recently, was reactivated as an active, creeping member of the San Andreas Fault system. The northern part of the Bartlett Springs Fault Zone is apparently still influenced by subduction of the Gorda Plate beneath North America, but it also accommodates strike-slip displacement associated with interaction of the Pacific Plate with North America. South of the map area, the Bartlett Springs Fault Zone steps into and merges with active faults of the eastern San Francisco Bay region; to the north of the map area and Round Valley, the fault zone steps into several other fault zones that connect with offshore thrust faults of the Cascadia subduction margin. Adequate understanding of the geologic framework of this fault zone and its relation to crustal structure of the adjacent region is important for purposes of planning and upgrading hydro-electric and other infrastructure in northern California that is directly or indirectly impacted by active faulting.

California↗
USGS2021

Late Holocene slip rate of the Mojave section of the San Andreas Fault near Palmdale, California

The geologic slip rate on the Mojave section of the San Andreas fault is poorly constrained, despite its importance for understanding earthquake hazard, apparent discrepancies between geologic and geodetic slip rates along this fault section, and long‐term fault interactions in southern California. Here, we use surficial geologic mapping, excavations, and radiocarbon and luminescence dating to quantify the displacements and ages of late Holocene landforms offset by the fault at three sites. At the Ranch Center site, the slip rate is determined using the base of a fan marking incision and deflection of an ephemeral channel. At the adjacent Key Slide site, the margin of a landslide deposited on indigenous fire hearths provides a minimum rate. At the X‐12 site, the slip rate is determined from a channel that incised into a broad fan surface, and is deflected and beheaded by the fault. We use maximum–minimum bounds on both the displacement and age of each offset feature to calculate slip rate for each site independently. Overlap of the three independent rate ranges yields a rate of 33–39 mm/yr over the last 3 ka, under the assumption that the sites share a common history, given their proximity. Considered in sequence, site‐level epistemic uncertainties in the data permit but do not require a rate increase since ∼1200 cal B.P. Modest rate changes can be explained by aleatory variability in earthquake timing and magnitude; larger changes could suggest a shared regional variation with the Garlock and other faults. The new late Holocene slip rates are consistent with geodetic model estimates that include a viscoelastic crust and earthquake cycle effects. The geologic slip rates also provide average slip over dozens of earthquake cycles—a key constraint for long‐term earthquake rupture forecasts.

California↗
USGS2023

Geologic and geophysical maps of the Stockton 30’ × 60’ quadrangle, California

This pamphlet and accompanying geologic and geophysical maps are the products of cooperative efforts by the California Geological Survey (CGS) and United States Geological Survey (USGS) to compile a comprehensive, digital representation of the bedrock geology, Quaternary surficial deposits, and potential-field anomalies within the boundaries of the Stockton 30’ × 60’ quadrangle. The Stockton 30’ × 60’ quadrangle covers approximately 4,890 km 2 of Contra Costa, Alameda, San Joaquin, and Stanislaus Counties, California. From the rugged hillsides of the northern Diablo Range in the west to the San Joaquin Valley in the east, the map extends roughly 88 km across growing suburban communities of the eastern San Francisco Bay Area and Livermore Valley, grass-covered ranchlands along eastern slopes of the Diablo Range, and into the low farmlands of the San Joaquin Valley and Sacramento-San Joaquin River Delta (Figure 1). The elevation ranges from near sea level in the Delta to 1,173 meters on Mt. Diablo, the most prominent peak of the San Francisco Bay region.

California↗
USGS1981

Northwest margin of California continental borderland: Marine geology and tectonic evolution

The northwest margin of the California continental borderland consists mainly of two northwest-trending pre-Neogene lithologic belts blanketed by Miocene and younger strata. These belts, which are lithologically and structurally correlated with the Franciscan Complex and Great Valley sequence of northern California, are interpreted to represent facies corresponding to the subduction complex and forearc-basin deposits of a late Mesozoic and Paleogene continental-margin arc-trench system. The outer belt, which forms the acoustic basement underlying the continental slope and Patton Ridge, is characterized by: (1) moderately high compressional velocities (5.1 to 6.2 km/sec), (2) discordant and discontinuous seismic reflectors, and (3) nonfossiliferous and diverse rock types t at range in metamorphic grade from zeolite-bearing arkosic sandstone to blueschist. Landward, the inner Great Valley sequence belt underlies Santa Rosa-Cortes Ridge and Santa Cruz and San Nicolas Basins; in contrast to the outer belt, this belt is characterized by: (1) intermediate compressional velocities (4.5 to 4.6 km/sec), (2) concordant and relatively continuous reflectors, and (3) a thick turbidite sequence of relatively undeformed and unmetamorphosed fossiliferous Cretaceous and Paleogene strata. The inner belt overlies a 6.6-km/sec layer that is probably oceanic crust, a relation consistent with the hypothesis that trapped old oceanic crust underlies the forearc basins along parts of some convergent margins. Well-developed wrench-fault structures in overlying Miocene strata record a transition from Paleogene subduction to Neogene transform faulting. Related events include widespread andesitic to dacitic volcanism and concurrent uplift and erosion of Miocene and older rocks. The proximity of these Miocene silicic volcanic rocks to the paleotrench (< 20 km) is best explained as resulting from passage of the southward-migrating Rivera ridge-fault-trench triple junction along the margin. On the basis of the age of the adjacent sea floor, passage of this triple junction occurred about 17 m.y. ago, a date that corresponds closely to the inception of volcanism and uplift in the northwest margin of the borderland. A widespread unconformity that separates highly deformed lower and lower middle iocene strata from relatively undeformed younger strata is assumed to mark the subsequent onset of wrench faulting. The timing of volcanism and uplift, and of the slightly younger wrenching event, closely matches the plate-tectonic model of Atwater and Molnar if the northwest margin of the borderland is restored to an earlier tectonic setting off Baja California, approximately 260 km southeast of its present position.

California↗