SEARCH · Search USGS

Results for “Bulletin of Volcanology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 5Linked to original sources

USGS2026

Efficient physics‐informed ground‐motion simulations with reduced‐order models: CyberShake implications and high‐resolution site terms for southern San Andreas fault earthquakes

Recent advances in Probabilistic Seismic Hazard Analysis (PSHA) leverage physics‐based ground‐motion simulations to estimate seismic hazard, such as the CyberShake project. However, computational costs quickly escalate when performing PSHA for numerous faults or sites and can become prohibitively expensive. To reduce computational demands, CyberShake uses reciprocity and interpolates physics‐informed corrections from simulations conducted at fewer locations, but the accuracy of these interpolations remains poorly quantified. To quantify the interpolation accuracy, we derive high‐resolution, frequency‐dependent site terms for southern California and compare them with interpolated site terms using the CyberShake approach. We accomplish this by performing a set of earthquake point‐source simulations distributed along the nonplanar fault geometry for the southern San Andreas fault (SSAF) extending from Bombay Beach to Lake Hughes. Using SeisSol, we simulate three minutes of viscoelastic seismic wave propagation for these sources and store the horizontal‐component Green’s functions for 480,000 sites. We then use a scientific machine learning approach based on interpolated proper orthogonal decomposition to construct an accurate reduced‐order model of the Green’s functions to efficiently predict effective amplitude spectra (EAS) for finite‐source rupture models of SSAF earthquakes. Using minimum curvature interpolation with tension, as used in CyberShake, we compare the interpolated site terms against our high‐resolution site terms. We identify local discrepancies with EAS differing by up to a factor of approximately three. Furthermore, we identify locations where unexpectedly high or low ground motions are missed when using the interpolated dataset for these earthquakes. We estimate that our approach may be used within CyberShake to reduce the time‐to‐solution by a factor of 336 for the entire earthquake rupture forecast. Our analysis of physics‐based site terms provides more insight into the seismic hazard due to SSAF ruptures and guides future developments by combining high‐performance computing and reduced‐order modeling techniques for PSHA.

California↗

USGS2025

Revisiting an enigma on California's north coast: The Mw6.5 Fickle Hill earthquake of 21 December 1954

Many earthquakes occur along the North Coast of California in the vicinity of the Mendocino Triple Junction (MTJ), where the Pacific, Gorda, and North American (NA) plates meet, and on the adjacent plate boundaries. The MTJ marks the nexus of the Mendocino and San Andreas faults with the Cascadia subduction zone (CSZ). Historically, most large earthquakes around the MTJ have been within the offshore Gorda plate and its subducted portion beneath the NA plate. North of the MTJ, active faults mapped in the NA plate are part of the CSZ fold‐and‐thrust belt. Although some events have been detected in the NA plate, no large historic events have been associated with mapped surface faults. The 21 December 1954 M w 6.5 earthquake in Humboldt County is one possible exception. Using published data from catalogs and articles, unpublished data from Berkeley’s archives, and S ‐ P times interpreted from two U.S. Coast and Geodetic Survey (USCGS) accelerometers, we determine a probability cloud for the earthquake’s hypocenter using NonLinLoc. The highest probability location lies beneath Fickle Hill just east of the city of Arcata, California, at 40.87° N, 124.03° W, and ∼11 km depth. Using P ‐wave polarities from Berkeley stations and the digitized waveforms from the accelerometers, we find that the focal mechanism most consistent with the data indicates thrust movement with strike, dip, and rake of 350°, 10°, and 90°, respectively, at a depth of 14 km. Given the depth uncertainties of both this event and the megathrust, this implies that the earthquake most likely took place on the subduction interface rather than on the mapped faults in the Mad River fault zone that trend 322° and dip to the northeast. The revisited intensity in the epicentral region also supports a location beneath Fickle Hill to the east of the city of Arcata, California.

California, Idaho, Nevada, Oregon, Washington↗

USGS2026

Evidence for organic and igneous carbon sources in the Mesoproterozoic Adirondack Highlands graphite district, New York

This study examined the origin of graphite mineralization in the Mesoproterozoic Adirondack Highlands. Flake graphite was mined from the historic mining district around Ticonderoga, New York, USA, from the 1850s to the 1920s. Most of the production and reserves from the district are disseminated graphite from feldspathic quartz schists (e.g., Dixon-American Graphite Co. mine, Faxon property, Flake Graphite Company). Protolith sediments of the schists were deposited in the Trans-Adirondack backarc basin at ca. 1.25 Ga and were metamorphosed to high grade at 1.18–1.15 Ga during the accretionary Shawinigan orogeny and at 1.09–1.02 Ga during the Ottawan phase of the Grenvillian orogeny. Major elements and carbon isotopes of graphite from schists (δ 13 C = −28.1‰ to −5.4‰ relative to Vienna Peedee belemnite) are consistent with derivation from organic carbon in protolith sandstones that devolatilized during metamorphism. Some small mines and prospects in the district mined graphitic calcite marbles and clinopyroxene ± scapolite skarns associated with a pegmatite suite dated by U-Pb in zircon to 1.04–1.01 Ga (e.g., Lead Hill and Crown Point deposits), and rare graphite veins are observed at several deposits. Hydrothermal flake graphite from pegmatites, skarns, and veins are distinct from graphite in schist-hosted deposits and have δ 13 C values that cluster around −7‰ to −5‰, consistent with deposition from igneous CO 2 . Covariation of carbon and oxygen stable isotopes and U-Pb zircon geochronology are not compatible with precipitation from fluids derived from country rock metapelites or marbles. Some graphite districts elsewhere show compelling evidence for remobilization and redeposition of sedimentary-derived carbon as hydrothermal graphite, sometimes as thick veins producing world-class, high-grade deposits. In the Adirondacks, there is evidence for two generations of graphite mineralization with distinct carbon sources: syngenetic graphite with an organic origin in Shawinigan quartz schists and epigenetic graphite with an igneous origin in Ottawan skarns and pegmatites.

New York↗

USGS2025

Near-surface material and topography generate anomalous high-frequency ground motion amplification in Chugiak, Alaska

An ∼3 km long nodal array oriented approximately east–west was deployed in Chugiak, Alaska, by the U.S. Geological Survey during 2021. The array intersects with the permanent NetQuakes station NP.ARTY, where peak ground acceleration (PGA) value of 1.98 g was recorded during the 2018 M w 7.1 Anchorage, Alaska, earthquake, in sharp contrast to the PGA of ∼0.3 g at a site just 4 km to the west. Seismic data for M w 1.8–4.3 aftershocks from the M w 7.1 event recorded by the nodal array confirm the anomalously large ground motions obtained at NP.ARTY as well as similar amplifications at nodes within ∼1 km to the east. Here, we performed 0–10 Hz 3D finite‐difference simulations, including high‐resolution surface topography, to explore the cause of the unexpectedly large amplification. As expected, the simulations computed with a regional 3D tomography velocity model severely underpredict the 0–10 Hz acceleration records at almost all sites. Adding a near‐surface low‐velocity taper to 300 m depth amplifies the accelerations by up to a factor of 5 and enables a reasonable match between the nodal data and simulations at sites to the west of NP.ARTY. However, this model still underpredicts the spectral energy in the area covered by glacial sediments by up to an order of magnitude. The addition of a till layer using a depth‐dependent shear‐wave velocity ( ⁠⁠ V s ) profile along with a homogeneous, 8 m thick low‐velocity layer with V s = 250 m/s representing the kame terraces improves the fit to data to within a factor of 2 at nodes located on top of the glacial sediments. Our study shows that the anomalously large high‐frequency amplification recorded at and near NP.ARTY can be explained by a combination of topographic effects and near‐surface low‐velocity material with amplification effects on the high‐frequency ground motion by up to about 40% and an order of magnitude, respectively.

Alaska↗

USGS2024

Peak streamflow trends and their relation to changes in climate in Illinois, Iowa, Michigan, Minnesota, Missouri, Montana, North Dakota, South Dakota, and Wisconsin

Flood-frequency analysis, also called peak-flow frequency or flood-flow frequency analysis, is essential to water resources management applications including critical structure design and floodplain mapping. Federal guidelines for doing flood-frequency analyses are presented in a U.S. Geological Survey Techniques and Methods report known as Bulletin 17C. A basic assumption within Bulletin 17C is that for drainage basins without major hydrologic alterations, statistical properties of the distribution of annual peak streamflows (peak flows) are stationary; that is, the mean, variance, and skew are constant. The stationarity assumption has been widely accepted within the flood-frequency community; however, a better understanding of long-term climatic persistence and concerns about potential climate change and land-use change has caused a reexamination of the stationarity assumption. This work is part of that reexamination. The stationarity assumption is a concern because flood-frequency analyses that do not incorporate observed trends and abrupt changes may result in a poor representation of the true flood risk. Bulletin 17C does not offer guidance for incorporating nonstationarities when estimating floods, and it describes a need for studies that incorporate changing climate or basin characteristics. In response to this need and a history of concern regarding nonstationarity peak flows in the region, this study was done to assess potential nonstationarity in peak flows in the north-central United States. This report summarizes the methods used to detect hydroclimatic changes in peak-flow data in the study region. Four periods were selected for analysis of peak flow, daily streamflow, and climate data. The periods are (1) a 100-year period, 1921–2020; (2) a 75-year period, 1946–2020; (3) a 50-year period, 1971–2020; and (4) a 30-year period, 1991–2020. The starting point for these analyses was the initial data analysis of peak flow described in Bulletin 17C, which includes plotting the peak flow and checking for autocorrelation, monotonic trends, and changes points. Analyses were added to examine additional features in the data. Results are provided in a U.S. Geological Survey data release. The study limitations are documented for users of the results.

Scientific Investigations Report↗

USGS2023

Oligocene–Miocene northward growth of the Tibetan Plateau: Insights from intermontane basins in the West Qinling Belt, NW China

Growth of the Tibetan Plateau, Earth’s broadest and highest elevation collisional system, shapes orographic barriers, reorganizes drainage networks, and influences surface erosion and sediment delivery, whose changes in space and provenance feed back to intracontinental tectonic processes. Studies of interior basins within the northern Tibetan Plateau provide new sediment accumulation, provenance, paleodrainage, and deformation timing data that enable a reconstruction of the far-field tectono-geomorphic evolution of the rising Tibetan Plateau. Along the northern plateau margin, topographic growth in the West Qinling Belt is inferred to have initiated in the Eocene, nearly coeval with the India-Asia collision, as well as in the late Miocene. However, geological knowledge about the intervening period remains at present enigmatic, and the kinematics and dynamics are uncertain. This study presents a multidisciplinary data set from the intermontane Anhua-Huicheng Basin (AHB; Gansu Province, China) to fill this gap. Magnetostratigraphic dating, regional mapping, and sedimentological analysis imply that contractional deformation and thrust-top basin systems formed within the West Qinling Belt in the Oligocene (not later than ca. 24 Ma). A combination of observations including paleocurrent changes, detrital zircon U-Pb age variations, and appearance of growth strata along the Anhua-Huicheng Basin reveal the rapid uplift of the West Qinling Belt at ca. 15 Ma. Sedimentation in the intermontane basins ended after the late Miocene (ca. 8 Ma), when the region experienced intrabasinal deformation, uplift, and erosion with the establishment of an external drainage system. Since the late Miocene, the growth of the West Qinling Belt reached a climax with the lack of substantial contractional deformation in Cenozoic sequences heralding the onset of the modern kinematic regime and attainment of high elevation. Observed transitions in the tectonostratigraphy and paleodrainage define different phases of deformation and plateau-wide shifts in stress reorganization, which led to the northward growth and later lateral expansion of the Tibetan Plateau.

GSA Bulletin↗

USGS2024

Geophysical constraints on continental rejuvenation in central China: Implications for outward growth of the Tibetan Plateau

Continental rejuvenation results from the tectonic reactivation of crustal structures and lithospheric reworking by mantle flow. Geochemical observations and field mapping have traditionally provided the primary evidence for the secular evolution of crustal composition and tectonic processes during continental rejuvenation. Nonetheless, the impact of continental rejuvenation on the observed present-day strain rate and orogenic-scale lithospheric structure has not been well constrained. The pre-existing E-W–trending Central China Orogenic Belt has been overprinted by the N-S–trending Central Longitudinal Seismic Belt and constitutes the intracontinental West Qinling Syntaxis in central China, where the tectonic setting changes eastward from contraction to extension. Combining updated global positioning system data and high-resolution crustal seismic tomography, we reveal a modern continental rejuvenation process within the West Qinling Syntaxis in central China. The northward extrusion of the Tibetan Plateau's weak lithospheric layer (middle-lower crust and lithospheric mantle) of southwestern China relative to the rigid Sichuan Basin/Ordos Block of the eastern West Qinling Syntaxis results in regional dextral shearing that shapes the Central Longitudinal Seismic Belt and defines the eastern Tibetan Plateau margin. The pre-existing E-W–trending Central China Orogenic Belt has been preserved above the brittle-ductile transition zone, and the northward movement of the deep lithospheric layer drives the deformation of the upper crust in the West Qinling Syntaxis. Our results, along with previous studies, suggest the presence of an intracontinental lithospheric interchange structure in central China. The continental rejuvenation of the West Qinling Syntaxis results from a combination of fault reactivation in the upper crust (Stage I, Eocene–Oligocene) and reworking of the deep lithosphere (Stage II, middle–late Miocene) related to the plateau-wide shift in stress accommodation ultimately driven by the redistribution of mass outward from the central Tibetan Plateau. At present, the transition zone between the high- and low-velocity anomalies along the Central Longitudinal Seismic Belt not only shapes the landscape boundary but controls the size and recurrence interval of earthquakes within the West Qinling Syntaxis in central China.

GSA Bulletin↗

USGS2024

Status and performance of the ShakeAlert® earthquake early warning system: 2019-2023

The U.S. Geological Survey (USGS)‐operated ShakeAlert® system is the United States West Coast earthquake early warning system ( Given et al. , 2018 ). In this study we detail ShakeAlert’s performance during some of the largest events seen by the system thus far. Statewide public alerting using ShakeAlert messages was authorized in California in October 2019. Over the next few years, public alerts were expanded into Oregon and then into Washington ( U.S. Geological Survey, 2024 ). ShakeAlert source results are routinely compared to the USGS Comprehensive Catalog (ComCat; Guy et al. , 2015 ; U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which contains the earthquake location and magnitude determined using complete waveform data. M 4.5 and larger is the threshold used for public alerting and was deliberately set below the level where damage is likely to compensate for cases where the system underestimates the magnitude. Between 17 October 2019 and 1 September 2023, the ShakeAlert system created 95 events with maximum magnitude estimates of M ≥4.5, the public alerting threshold. 94 of the 95 events were due to real earthquakes. Seven were categorized “false” per ShakeAlert’s internal definition that there was no matching catalog event within 100 km and 30 s of origin time; however, all but one of these were real earthquakes that were poorly located, primarily because they were at the edges of the seismic network. Three detected events were labeled “missed” because they were very poorly located (>100 km location error). In addition, the system did not produce solutions for four ComCat events M ≥4.5 ( U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which were all at the edge of the alerting and network boundaries. The ShakeAlert system has accurately detected the majority of earthquakes that have occurred within the operational region since completing the public rollout, and alerts from the system have been delivered to millions of cell phone users throughout the West Coast.

California, Oregon, Washington↗

USGS2025

Overview of The SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest earthquake sequence

We present initial findings from the ongoing Community Stress Drop Validation Study to compare spectral stress‐drop estimates for earthquakes in the 2019 Ridgecrest, California, sequence. This study uses a unified dataset to independently estimate earthquake source parameters through various methods. Stress drop, which denotes the change in average shear stress along a fault during earthquake rupture, is a critical parameter in earthquake science, impacting ground motion, rupture simulation, and source physics. Spectral stress drop is commonly derived by fitting the amplitude‐spectrum shape, but estimates can vary substantially across studies for individual earthquakes. Sponsored jointly by the U.S. Geological Survey and the Statewide (previously, Southern) California Earthquake Center our community study aims to elucidate sources of variability and uncertainty in earthquake spectral stress‐drop estimates through quantitative comparison of submitted results from independent analyses. The dataset includes nearly 13,000 earthquakes ranging from M 1 to 7 during a two‐week period of the 2019 Ridgecrest sequence, recorded within a 1° radius. In this article, we report on 56 unique submissions received from 20 different groups, detailing spectral corner frequencies (or source durations), moment magnitudes, and estimated spectral stress drops. Methods employed encompass spectral ratio analysis, spectral decomposition and inversion, finite‐fault modeling, ground‐motion‐based approaches, and combined methods. Initial analysis reveals significant scatter across submitted spectral stress drops spanning over six orders of magnitude. However, we can identify between‐method trends and offsets within the data to mitigate this variability. Averaging submissions for a prioritized subset of 56 events shows reduced variability of spectral stress drop, indicating overall consistency in recovered spectral stress‐drop values.

California↗

USGS2024

Geological context and significance of the clay-sulfate transition region in Mount Sharp, Gale crater, Mars: An integrated assessment based on orbiter and rover data

On Mars, phyllosilicate (“clay”) minerals are often associated with older terrains, and sulfate minerals are associated with younger terrains, and this dichotomy is taken as evidence that Mars’ surface dried up over time. Therefore, in situ investigation of the Mount Sharp strata in Gale crater, which record a shift from dominantly clay-bearing to sulfate-bearing minerals, as seen in visible−near-infrared orbital reflectance spectra, is a key science objective for the Mars Science Laboratory (MSL) Curiosity rover mission. Here, we present regional (orbiter-based) and in situ (rover-based) evidence for a low-angle erosional unconformity that separates the lacustrine and marginal lacustrine deposits of the Carolyn Shoemaker formation from the dominantly eolian deposits of the lower Mirador formation within the orbitally defined clay-sulfate transition region. The up-section record of wetter (Carolyn Shoemaker formation) to drier (lower Mirador formation) depositional conditions is accompanied by distinct changes in diagenesis. Clay minerals occur preferentially within the Carolyn Shoemaker formation and are absent within the lower members of the Mirador formation. At and above the proposed unconformity, strata are characterized by an increase in diagenetic nodules enriched in X-ray amorphous Mg-sulfate. Early clay formation in the Carolyn Shoemaker formation may have created a hydraulic barrier such that later migrating magnesium- and sulfur-rich fluids accumulated preferentially within the lower members of the Mirador formation. The proposed unconformity may have also acted as a fluid conduit to further promote Mg-sulfate nodule formation at the Carolyn Shoemaker−Mirador formation boundary. These results confirm an association of the clay-sulfate transition with the drying of depositional environments, but they also suggest that at least some orbital sulfate signatures within the region are not time-congruent with the environmental signals extracted from primary sedimentology. Our findings highlight that complex interactions among primary depositional environment, erosion, and diagenesis contribute to the transition in clay-sulfate orbital signatures observed in the stratigraphy of Mount Sharp.

GSA Bulletin↗

USGS2023

The Saudi Geological Survey-U.S. Geological Survey northern Harrat Rahat project—Styles, rates, causes, and hazards of volcanism near Al Madīnah al Munawwarah, Kingdom of Saudi Arabia

Active volcanic systems pose serious hazards to people and property including inundation and incineration by lava, blanketing by tephra (volcanic ash), exposure to noxious volcanic gases, and damage from shallow earthquakes triggered by ascending molten material (magma). To improve understanding of volcanism and associated seismicity on the western Arabia Plate, the Saudi Geological Survey and the U.S. Geological Survey conducted a multi-year investigation of the northern Harrat Rahat volcanic field adjacent to the city of Al Madīnah al Munawwarah, Kingdom of Saudi Arabia. Project components included creation of a high-resolution digital topographic base; interpretation of eruptive history supported by detailed geologic mapping, paleomagnetism, and abundant high-precision geochronology of volcanic deposits; assessments of eruptive styles and volcanic hazards by physical volcanology; investigation of the origins of magmas in the mantle and of their differentiation in the crust revealed by chemical and isotopic petrology; gravity and magnetotelluric surveys to reveal crustal structures and to search for magma reservoirs; and regional and local seismic tomography and analyses of seismic hazards. Project results are presented in this Professional Paper as chapters written for technical scientific audiences. This initial chapter introduces the project and briefly summarizes results in plain language for readers who have more general backgrounds.

Al Madīnah al Munawwarah↗

USGS2025

The Hardscrabble Creek complex: A newly discovered, mostly buried, Mesoproterozoic mafic-ultramafic pluton in the Wet Mountains, Colorado, USA

The origin of prolific ca. 1.4 Ga ferroan magmatism between the southwestern USA and eastern Canada is enigmatic and has been explained by various models, including extensional, mantle plume, and convergent plate-margin models. Rare mafic plutons are associated with the ferroan plutons, which may help constrain their mantle source and tectonic setting. In the southwestern USA, only two such mafic plutons are known to exist. We present the first evidence for a third, mostly buried, potentially layered, mafic-ultramafic Mesoproterozoic pluton, informally referred to as the Hardscrabble Creek complex, in the central Wet Mountains of Colorado, USA. Recent geophysical data show an elliptical magnetic and gravity high spatially coincident with local gabbroic outcrops. New field and petrographic analyses of these exposed rocks reveal that they consist of ultramafic to mafic cumulates, including orthopyroxenite, olivine norite, norite, and anorthosite. High-precision U-Pb dating of zircon from orthopyroxenite and norite yield weighted mean 206 Pb/ 238 U dates of 1352.36 ± 1.60 Ma and 1352.37 ± 1.71 Ma, respectively. These dates indicate that the complex formed over a narrow timeframe, after the adjacent 1362 ± 7 Ma ferroan San Isabel Granite, and during the waning stages of the regional ca. 1.4 Ga ferroan magmatism. Whole-rock geochemistry and Nd-Sr-Pb isotope compositions of samples from the Hardscrabble Creek complex are similar to those of the San Isabel Granite, suggesting that they were derived from the same or a similar mantle source. The mineral chemistry of the samples is comparable to Proterozoic massif-type anorthosites and related mafic intrusions, indicating that the Hardscrabble Creek complex and San Isabel Granite together represent a rare anorthosite-mangerite-charnockite-granite (AMCG) suite in the southwestern USA. The Hardscrabble Creek complex is unique because it formed ~80 m.y. after the other few mafic plutons in the southwestern USA, and it contains an ultramafic section that is absent from these plutons and rare to the AMCG suite in general. A combination of arc-like whole-rock geochemistry, chondrite uniform reservoir-like Nd-Sr-Pb isotopes, and ocean island basalt (OIB)-like zircon trace element chemistry suggests that the complex was derived from a partial melt of OIB-like mantle and interacted with metasomatically enriched lithospheric mantle. The enriched lithospheric mantle signature, combined with the long ~160 m.y. duration of magmatism in the region, is consistent with a period of protracted convergent tectonism.

Colorado↗

USGS2026

Unraveling protracted modification of Archean and Paleoproterozoic crust in central Laurentia, Penokean orogen, with garnet and accessory mineral geochronology and microstructural analysis

Proterozoic metamorphism and deformation of the southern margin of the Superior craton in the Lake Superior region is attributed to the Penokean orogeny (1890−1830 Ma). This model includes a period of crustal inversion in which Archean basement blocks were exhumed through overlying Paleoproterozoic strata, producing the corridor of gneiss domes that parallels the trend of the Penokean orogen across the northern Midcontinent, USA. However, recent geologic mapping and 40 Ar/ 39 Ar geochronology challenge this interpretation, suggesting instead that the gneiss dome structures reflect younger episodes of tectonic activity along the southern margin of Laurentia. In absence of integrated pressure-temperature-time-deformation constraints for these rocks, interpretations are largely limited to their final cooling history, making it difficult to both identify the tectonic forces that shaped the architecture of the Penokean orogenic belt and assess the extent to which later Proterozoic tectonism modified the southern Superior craton. We address this problem with an approach joining thermodynamic modeling, garnet and accessory mineral geochronology, and microstructural analysis for several metamorphic rocks across the gneiss dome corridor. The U-Pb ages of titanite reveal that the Proterozoic geometries of exhumed basement gneiss domes are governed by preexisting Archean structures. Garnet Lu-Hf geochronology constrains the timing of prograde-to-peak metamorphism in the Penokean orogenic belt. Granulite facies metamorphism is related to the final stages of the Penokean orogeny at 1837 Ma and localized in a belt of high-grade rocks near a major Penokean suture. Garnet Lu-Hf ages of samples adjacent to gneiss domes reflect regional metamorphism following the accretionary phase of the Penokean orogeny, between 1825 Ma and 1782 Ma, which we suggest reflects continued crustal thickening related to convergence farther south during this time interval. Combination of garnet microstructures and Sm-Nd ages reflects later exhumation of gneiss domes and buried metasedimentary rocks by ca. 1750 Ma, consistent with previously published 40 Ar/ 39 Ar cooling ages across the region. Reset Lu-Hf and Sm-Nd garnet ages and U-Pb ages of syn-kinematic titanite reflect reactivation of primary Penokean structures during this period of basement uplift. These data document significant modification of the Penokean orogen and the Archean crust of the southern Superior province between 1800 Ma and 1700 Ma. Tectonic activity during this interval coincides with collisional events recognized in western Laurentia, suggesting that the period immediately following the Penokean orogeny may be a broadly important time for crustal growth and modification in proto-North America.

Michigan, Wisconsin↗

USGS2025

ShakeAlert® version 3: Expected performance in large earthquakes

The ShakeAlert earthquake early warning (EEW) system partners along with U.S. Geological Survey (USGS) licensed operators deliver EEW alerts to the public and trigger automated systems when a significant earthquake is expected to impact California, Oregon, or Washington. ShakeAlert’s primary goal is to provide usable warning times before the arrival of damaging shaking. EEW is most likely to achieve this goal in large‐magnitude earthquakes. In recent years, ShakeAlert has gone through a series of upgrades to its underlying scientific algorithms aimed at improved performance during large earthquakes. Version 3 of this software recently went live in the production system and includes improvements to all algorithms. The main seismic algorithms that detect an earthquake and characterize its location, magnitude, and fault rupture orientation are faster than older versions. Other key changes include: using real‐time geodetic data to characterize the magnitude growth in large earthquakes; the introduction of an alert pause procedure to compromise between speed near the epicenter and improved accuracy at larger distances; and the inclusion of a nonergodic site‐response model in the ground‐motion predictions. ShakeAlert has achieved its primary goal of usable warning times before strong shaking at some locations in real‐time operations in recent M 6 earthquakes. Using offline tests, we demonstrate usable warning times are possible for many sites with peak shaking values of modified Mercalli intensity (MMI) 7–8 in M 7+ earthquakes and also for many MMI 8–9 sites in M 8+ earthquakes. ShakeAlert partners use a variety of MMI and magnitude thresholds in deciding when to alert their users within bounds set by the USGS. Our study shows that there is room to raise the magnitude thresholds up to about M 5.5 without adversely affecting performance in large earthquakes. The ground‐motion criteria are more complex owing to a significant drop‐off in warning times between the MMI 4 and 5 levels of predicted shaking. However, widely used ShakeAlert products, such as the MMI 3 and 4 contour products, can provide sufficiently long warning times before strong shaking in moderate‐to‐great earthquakes to enable a range of protective actions.

Bulletin of the Seismological Society of America↗

USGS2024

Introduction and methods of analysis for peak streamflow trends and their relation to changes in climate in Illinois, Iowa, Michigan, Minnesota, Missouri, Montana, North Dakota, South Dakota, and Wisconsin

Flood-frequency analysis, also called peak-flow frequency or flood-flow frequency analysis, is essential to water resources management applications including critical structure design and floodplain mapping. Federal guidelines for doing flood-frequency analyses are presented in a U.S. Geological Survey Techniques and Methods Report known as Bulletin 17C. A basic assumption within Bulletin 17C is that for drainage basins without major hydrologic alterations, statistical properties of the distribution of annual peak streamflows (peak flows) are stationary; that is, the mean, variance, and skew are constant. The stationarity assumption has been widely accepted within the flood-frequency community; however, a better understanding of long-term climatic persistence and concerns about potential climate change and land-use change has caused a reexamination of the stationarity assumption. Flood-frequency analyses that do not incorporate observed trends and abrupt changes may result in a poor representation of the true flood risk. Bulletin 17C does not offer guidance for incorporating nonstationarities when estimating floods, and it describes a need for studies that incorporate changing climate or basin characteristics. In response to this need and a history of concern regarding nonstationarity peak flows in the region, this study was done by the U.S. Geological Survey, in cooperation with the Departments of Transportation of Illinois, Iowa, Michigan, Minnesota, Missouri, South Dakota, and Wisconsin; the Montana Department of Natural Resources and Conservation; and the North Dakota Department of Water Resources, to assess potential nonstationarity in peak flows in the north-central United States. This chapter summarizes the methods used to detect hydroclimatic changes in peak-flow data in the study region. A wide range of analyses and statistical approaches are applied to document the primary mechanisms controlling floods and characterize temporal changes in hydroclimatic variables and peak flow. Four periods were selected for analysis of peak flow, daily streamflow, and climate data. The periods are (1) a 100-year period, 1921–2020; (2) a 75-year period, 1946–2020; (3) a 50-year period, 1971–2020; and (4) a 30-year period, 1991–2020. The climate data consist of monthly time series estimates of temperature, precipitation, potential evapotranspiration, actual evapotranspiration, snowfall, soil moisture storage, snow water equivalent, and runoff on a 3.1-mile by 3.1-mile grid for the conterminous United States. Statistical and graphical analyses were used to investigate potential changes in hydrology and climate. The starting point for these analyses was the initial data analysis of peak flow described in Bulletin 17C, which includes plotting the peak flow and checking for autocorrelation, monotonic trends, and changes points. Analyses were added to examine additional features in the data. To examine potential causal drivers of changes, the climate data were analyzed graphically and statistically. Results are provided in a U.S. Geological Survey data release. The study limitations are documented for users of the results.

Iowa, Illinois, Michigan, Missouri, Minnesota, Mon↗

USGS2024

Upper crustal seismic velocity structure of the Hayward fault zone, San Francisco Bay, California, USA: Results from the 2016 East Bay Seismic Experiment (EBSI-16)

We developed Vp, Vs, Vp / Vs ratio, and Poisson’s ratio models of the uppermost crust (<4 km depth) from the eastern San Francisco (SF) Bay (California, USA) to near the Calaveras fault along a 15-km-long, linear profile. Upper crustal velocities are highly variable beneath, west, and well east of the Hayward fault. We observe eight notable features, from west to east: (1) Near San Francisco Bay, there is an ~2-km-wide structure with high Vp / Vs ratios (up to 5) and Poisson’s ratios (up to 0.48) extending from the surface to the base of our model, which we suggest the structure is a near-vertical fault that lies along a straight-line projection between the Silver Creek fault to the south and the Point Richmond fault to the north. The structure may be part of an ~90-km-long fault along the eastern SF Bay. (2) The western East Bay Plain, the lower lying area between the bay and the hills, includes up to 800 m of low-velocity sediments ( Vp ~1600–3000 m/s, Vs ~500 m/s to ~1000 m/s), underlain by higher velocity basement rocks ( Vp ~3000–5800 m/s; Vs ~1000–1500 m/s). (3) Between ~1 km and 3 km east of the Bay shoreline, sediments thin in a series of steps (likely faults) toward the Hayward fault. (4) Between ~3 km west and ~1 km east of the Hayward fault (at the East Chabot fault) at depths greater than 1 km, basement Vp (up to 6000 m/s) and Vs (up to 2800 m/s) are high, and Vp / Vs ratios (<2) and Poisson’s ratios (<0.3) are low, suggesting crystalline rocks. Furthermore, a near-vertical zone of low Vp / Vs ratios and Poisson’s ratios is between near-surface traces of the Hayward and East Chabot faults, likely corresponding to the San Leandro Gabbro of Ponce et al. (2003) . (5) Eastward of the East Chabot fault in the upper 1.5 km, basement Vp (~3000 m/s to ~4200 m/s) and Vs (~1200–2000 m/s) are lower than those west of the fault. (6) In the eastern Hayward/Oakland Hills, there are zones of laterally varying, high- and low-velocity ( Vp ~2500–3000 m/s) Jurassic–Cretaceous and Tertiary sediments in the shallow subsurface that likely extend much deeper than imaged. (7) Seismic energy that propagates westward from sources east of the Hayward fault (HF) appear weaker than energy that propagates eastward from sources west of the HF, suggesting that the HF acts as a partial barrier to shallow seismic energy propagation into the more populated eastern SF Bay area. (8) Unlike many fault zones, it appears that the active trace of the Hayward fault (in our study area) is not cored by a prominent, low-velocity zone relative to rocks to the east and west of the active trace. However, the active trace does mark a prominent change from relatively higher velocities to the west and lower velocities to the east.

California↗

USGS2017

Field-trip guide to Mount Hood, Oregon, highlighting eruptive history and hazards

This guidebook describes stops of interest for a geological field trip around Mount Hood volcano. It was developed for the 2017 International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly in Portland, Oregon. The intent of this guidebook and accompanying contributions is to provide an overview of Mount Hood, including its chief geologic processes, magmatic system, eruptive history, local tectonics, and hazards, by visiting a variety of readily accessible localities. We also describe coeval, largely monogenetic, volcanoes in the region. Accompanying the field-trip guidebook are separately authored contributions that discuss in detail the Mount Hood magmatic system and its products and behavior (Kent and Koleszar, this volume); Mount Hood earthquakes and their relation to regional tectonics and the volcanic system (Thelen and Moran, this volume); and young surface faults cutting the broader Mount Hood area whose extent has come to light after acquisition of regional light detection and ranging coverage (Madin and others, this volume). The trip makes an approximately 175-mile (280-kilometer) clockwise loop around Mount Hood, starting and ending in Portland. The route heads east on Interstate 84 through the Columbia River Gorge National Scenic Area. The guidebook points out only a few conspicuous features of note in the gorge, but many other guides to the gorge are available. The route continues south on the Mount Hood National Scenic Byway on Oregon Route 35 following Hood River, and returns to Portland on U.S. Highway 26 following Sandy River. The route traverses rocks as old as the early Miocene Eagle Creek Formation and overlying Columbia River Basalt Group of middle Miocene age, but chiefly lava flows and clastic products of arc volcanism of late Miocene to Holocene age.

Oregon↗

USGS2024

Timing and geometry of the Chemehuevi Formation reveal a late Pleistocene sediment pulse into the Lower Colorado River

The Chemehuevi Formation is a distinctive 50−150-m-thick wedge-shaped Pleistocene sedimentary unit deposited by the Colorado River. It lines the perimeters of the river’s floodplains and bedrock canyons for more than 600 km between the mouth of the Grand Canyon and the delta region in the Gulf of California. The formation is composed of a basal tan to light-yellowish-brown and pale-orange mud-dominated facies overlain and interbedded by a light-yellow-brown sand-dominated facies. The unit is one of two extensively exposed aggradational packages in the Lower Colorado River corridor, in addition to a series of other smaller alluvial terrace deposits. The Chemehuevi Formation appears to represent the response of a fully integrated Colorado River system to a significant perturbation, in contrast to the Bullhead Alluvium, which is likely a unique result of Pliocene river integration. The aggradation of the Chemehuevi Formation in the Lower Colorado River corridor may be similarly due to a unique event in the Colorado River system, or it may instead be a well-preserved sedimentary sequence recording typical behavior of the Colorado River below the Grand Canyon in the late Pleistocene. As such, multiple causal mechanisms have been proposed, but no study to date has conclusively explained the Chemehuevi Formation. To help resolve its timing, duration, and origin, we applied post-infrared infrared stimulated luminescence, carbonate U-Th series, and zircon sensitive high-resolution ion microprobe U-Th series geochronology to determine the ages of key exposures of the unit over a wide spatial area. These new data demonstrate that the Chemehuevi Formation was deposited ca. 110−90 ka. The depositional ages collectively overlap, suggesting that deposition occurred rapidly relative to the resolution of the geochronometers. The new depositional timing coincides with a shift from glacial to interglacial conditions after the marine isotope stage 5-6 transition. This observation is consistent with a climate-induced sediment pulse as a causal mechanism, yet correlations with similar deposits in the Colorado River headwaters or in neighboring catchments appear elusive. Potentially, climate transitions between glacial and interglacial periods induced a sediment pulse from hillslopes of the Colorado River system that resulted in the Chemehuevi Formation. An alternative or additional explanation is that the Chemehuevi Formation represents release of lava dam−impounded sediment in the Grand Canyon. The surface geometry of the Chemehuevi Formation projects upstream to the approximate location of lava dams, and the largest possible lava dam impoundment (the Upper Prospect dam) is comparable in volume to the formation. The lava dam hypothesis appears to be a possible explanation for the Chemehuevi Formation. However, tying deposition to a specific lava dam or series of lava dams remains challenging due to discrepancies in timing and volume. The combined effects of a series of lava dams may have led to the Chemehuevi Formation, as the last Pleistocene lava dam eruption coincides with the onset of deposition. Alternatively, the formation may result from the combined effects of both regional climate transitions and the lava dams that created a transient reservoir to compound a climate transition−driven sediment pulse. The geochronologic data presented here do not allow us to distinguish between the lava dam or climate transition hypotheses but will need to be reconciled with any future proposed depositional model.

Arizona, California, Nevada↗