SEARCH · Search USGS

Results for “The Earth Observer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources

USGS2012

Deformation from 1973 to 1987 in the epicentral area of the 1959 Hebgen Lake, Montana, earthquake (Ms = 7.5)

A 40‐km aperture trilateration network centered on the 1959 Hebgen Lake earthquake epicenter has been surveyed in 1973, 1974, 1976, 1978, 1981, 1984, and 1987. The deformation inferred from those surveys is described roughly by a uniaxial, 0.266 ± 0.014 μstrain/yr, N15°E ± 1°extension that is uniform in both time and space. That extension is orthogonal to the strike (N78°W ± 5°) of the 1959 rupture plane inferred from focal mechanism solutions. The absence of strain accumulation in the N75°W direction suggests that the source of deformation must be greatly elongated in that direction. Looked at in greater detail, the deformation is found to be concentrated in the northern part of the network. The zone of concentrated deformation coincides with a part of a well‐defined trend in seismicity that extends at least 100 km N75°W from the Sour Creek resurgent dome in the Yellowstone caldera. Extension perpendicular to that trend is indicated by focal mechanism solutions. Thus, the zone of rifting identified within the Hebgen Lake network apparently extends east southeast to the Yellowstone caldera. About 8 mm/yr extension is observed across a 20‐km width within the zone.

Montana, Wyoming↗

USGS2000

Land-subsidence and ground-water storage monitoring in the Tucson Active Management Area, Arizona

The Tucson Active Management Area (TAMA) comprises two basins--Tucson Basin and Avra Valley. The TAMA has been directed by Arizona ground-water law to attain an annual balance between groundwater withdrawals and recharge by the year 2025. This balance is defined by the statute as "safe yield." Current ground-water withdrawals exceed recharge, resulting in conditions of ground-water overdraft, which causes removal of water from ground-water storage and subsidence of the land surface. Depletion of storage and associated land subsidence will not be halted until all discharge from the system, both natural and human induced, is balanced by recharge. The amount of the ground-water overdraft has been difficult to estimate until recently because it could not be directly measured. Overdraft has been estimated using indirect water-budget methods that rely on uncertain estimates of recharge. As a result, the status of the ground-water budget could not be known with great certainty. Gravity methods offer a means to directly measure ground-water overdraft through measurement of changes in the gravitational field of the Earth that are caused by changes in the amount of water stored in the subsurface. Changes in vertical position also affect the measured gravity value and thus subsidence also must be monitored. The combination of periodic observations of gravity and vertical positions provide direct measures of changes in stored ground water and land subsidence.

Arizona↗

USGS2012

Short-period strain (0.1–105 s): Near-source strain field for an earthquake (ML 3.2) near San Juan Bautista, California

Measurements of dilational earth strain in the frequency band 25–10 −5 Hz have been made on a deep borehole strainmeter installed near the San Andreas fault. These data are used to determine seismic radiation fields during nuclear explosions, teleseisms, local earthquakes, and ground noise during seismically quiet times. Strains of less than 10 −10 on these instruments can be clearly resolved at short periods (< 10 s) and are recorded with wide dynamic range digital recorders. This permits measurement of the static and dynamic strain variations in the near field of local earthquakes. Noise spectra for earth strain referenced to 1 (strain) 2 /Hz show that strain resolution decreases at about 10 dB per decade of frequency from −150 dB at 10 −4 Hz to −223 dB at 10 Hz. Exact expressions are derived to relate the volumetric strain and displacement field for a homogeneous P wave in a general viscoelastic solid as observed on colocated dilatometers and seismometers. A rare near-field recording of strain and seismic velocity was obtained on May 26, 1984, from an earthquake ( M L 3.2) at a hypocentral distance of 3.2 km near the San Andreas fault at San Juan Bautista, California. While the data indicate no precursory strain release at the 5 × 10 −11 strain level, a coseismic strain release of 1.86 nanostrain was observed. This change in strain is consistent with that calculated from a simple dislocation model of the event. Ground displacement spectra, determined from the downhole strain data and instrument-corrected surface seismic data, suggest that source parameters estimated from surface recordings may be contaminated by amplification effects in near-surface low-velocity materials.

California↗

USGS2007

The role of fault zone drilling

The objective of fault-zone drilling projects is to directly study the physical and chemical processes that control deformation and earthquake generation within active fault zones. An enormous amount of field, laboratory, and theoretical work has been directed toward the mechanical and hydrological behavior of faults over the past several decades. Nonetheless, it is currently impossible to differentiate between – or even adequately constrain – the numerous conceptual models of active faults proposed over the years. For this reason, the Earth science community is left in the untenable position of having no generally accepted paradigm for the mechanical behavior of faults at depth. One of the primary causes for this dilemma is the difficulty of either directly observing or inferring physical properties and deformation mechanisms along faults at depth, as well as the need to observe directly key parameters such as the state of stress acting on faults at depth, pore fluid pressure (and its possible variation in space and time), and processes associated with earthquake nucleation and rupture. Today, we know very little about the composition of active faults at depth, their constitutive properties, the state of in situ stress or pore pressure within fault zones, the origin of fault-zone pore fluids, or the nature and significance of time-dependent fault-zone processes.

Book chapter↗

USGS2015

The importance of dunes on a variety of planetary surfaces

Scientists observe aeolian bed forms, or dune-like structures, throughout the solar system in a range of locations, from bodies with only transient atmospheres, such as comets, to places with thick atmospheres, such as Venus and the Earth’s ocean floor. Determining the source of sand and the different dune formations that result are thus important to understanding solar system and planetary evolution.

Eos, Earth and Space Science News↗

USGS1996

Geyser periodicity and the response of geysers to deformation

Numerical simulations of multiphase fluid and heat transport through a porous medium define combinations of rock properties and boundary conditions which lead to geyser‐like periodic discharge. Within the rather narrow range of conditions that allow geyser‐like behavior, eruption frequency and discharge are highly sensitive to the intrinsic permeabilities of the geyser conduit and the surrounding rock matrix, to the relative permeability functions assumed, and to pressure gradients in the matrix. In theory, heat pipes (concomitant upward flow of steam and downward flow of liquid) can exist under similar conditions, but our simulations suggest that the periodic solution is more stable. Simulated time series of geyser discharge are chaotic, but integrated quantities such as eruption frequency and mass discharge per eruption are free of chaos. These results may explain the observed sensitivity of natural geysers to small strains such as those caused by remote earthquakes, if ground motion is sufficient to induce permeability changes. Changes in geyser behavior caused by minor preseismic deformation, periodic surface loading, and Earth tides are more difficult to explain in the context of our current model.

Journal of Geophysical Research B: Solid Earth↗

USGS2006

Long-term eruptive activity at a submarine arc volcano

Three-quarters of the Earth's volcanic activity is submarine, located mostly along the mid-ocean ridges, with the remainder along intraoceanic arcs and hotspots at depths varying from greater than 4,000 m to near the sea surface. Most observations and sampling of submarine eruptions have been indirect, made from surface vessels or made after the fact. We describe here direct observations and sampling of an eruption at a submarine arc volcano named NW Rota-1, located 60 km northwest of the island of Rota (Commonwealth of the Northern Mariana Islands). We observed a pulsating plume permeated with droplets of molten sulphur disgorging volcanic ash and lapilli from a 15-m diameter pit in March 2004 and again in October 2005 near the summit of the volcano at a water depth of 555 m (depth in 2004). A turbid layer found on the flanks of the volcano (in 2004) at depths from 700 m to more than 1,400 m was probably formed by mass-wasting events related to the eruption. Long-term eruptive activity has produced an unusual chemical environment and a very unstable benthic habitat exploited by only a few mobile decapod species. Such conditions are perhaps distinctive of active arc and hotspot volcanoes. ?? 2006 Nature Publishing Group.

Nature↗

USGS1975

Mechanism of Formation of Pillow Lava

Much of the ocean floor is covered by lava of a distinctive character. The lava appears to be made up of closely packed ellipsoidal masses about the size and shape of pillows - hence the term pillow lava. Only within the last few years has the abundance of pillow lava on the ocean floor been fully recognized. Ocean-bottom photographs and dredge samples have shown that the great bulk of new ocean floor created at diverging plate boundaries (such as the Mid-Atlantic Ridge) is composed of pillowed basaltic lava flows. Closeup observations from submarines at depths of 2.7 km in the rift valley of the Mid-Atlantic Ridge have verified that virtually all the lavas erupted at this plate boundary are pillowed. The submarine portions of the great oceanic volcanoes, such as the ridge beneath the Hawaiian Islands, are also known to be built largely of pillow lava, and it is widespread in outcrops of uplifted ancient lava. Pillow lava is probably the most abundant form of volcanic rock on earth, though most of it is hidden beneath the world's oceans and mantled by younger sediments. Most investigators agree that the pillows form when fluid lava chills in contact with water, either when it erupts directly into water (or beneath ice) or when it flows across a shoreline and into a body of water. However, prior to our study, the process of pillow formation had never been directly observed. The recent eruptions of Kilauea Volcano in Hawaii provided an unparalleled opportunity to study the movement and cooling of lava beneath the sea. In June 1969, lava from the new Mauna Ulu vent on the east rift zone of Kilauea spilled into the sea after flowing 12 km down the south flank of the volcano. This pattern was repeated, with lava flowing into the sea for a few weeks each year through 1973. In April 1971 scuba divers for the first time investigated lava flowing underwater and learned that in favorable circumstances the lava could be approached closely. Despite heated water, explosive concussions, vigorous convective currents, and poor visibility due to suspended sediment, valuable observations were made.

American Scientist↗

USGS2012

Crustal seismicity and the earthquake catalog maximum moment magnitudes (Mcmax) in stable continental regions (SCRs): Correlation with the seismic velocity of the lithosphere

A joint analysis of global seismicity and seismic tomography indicates that the seismic potential of continental intraplate regions is correlated with the seismic properties of the lithosphere. Archean and Early Proterozoic cratons with cold, stable continental lithospheric roots have fewer crustal earthquakes and a lower maximum earthquake catalog moment magnitude ( M cmax ). The geographic distribution of thick lithospheric roots is inferred from the global seismic model S40RTS that displays shear-velocity perturbations (δ V S ) relative to the Preliminary Reference Earth Model (PREM). We compare δ V S at a depth of 175 km with the locations and moment magnitudes ( M w ) of intraplate earthquakes in the crust ( Schulte and Mooney, 2005 ). Many intraplate earthquakes concentrate around the pronounced lateral gradients in lithospheric thickness that surround the cratons and few earthquakes occur within cratonic interiors. Globally, 27% of stable continental lithosphere is underlain by δ V S ≥3.0%, yet only 6.5% of crustal earthquakes with M w >4.5 occur above these regions with thick lithosphere. No earthquakes in our catalog with M w >6 have occurred above mantle lithosphere with δ V S >3.5%, although such lithosphere comprises 19% of stable continental regions. Thus, for cratonic interiors with seismically determined thick lithosphere (1) there is a significant decrease in the number of crustal earthquakes, and (2) the maximum moment magnitude found in the earthquake catalog is M cmax =6.0. We attribute these observations to higher lithospheric strength beneath cratonic interiors due to lower temperatures and dehydration in both the lower crust and the highly depleted lithospheric root.

Earth and Planetary Science Letters↗

USGS2017

Detection of diazotrophy in the acetylene-fermenting anaerobe Pelobacter sp. strain SFB93

Acetylene (C2H2) is a trace constituent of the present Earth's oxidizing atmosphere, reflecting a mixture of terrestrial and marine emissions from anthropogenic, biomass-burning, and unidentified biogenic sources. Fermentation of acetylene was serendipitously discovered during C2H2 block assays of N2O reductase, and Pelobacter acetylenicus was shown to grow on C2H2 via acetylene hydratase (AH). AH is a W-containing, catabolic, low-redox-potential enzyme that, unlike nitrogenase (N2ase), is specific for acetylene. Acetylene fermentation is a rare metabolic process that is well characterized only in P. acetylenicus DSM3246 and DSM3247 and Pelobacter sp. strain SFB93. To better understand the genetic controls for AH activity, we sequenced the genomes of the three acetylene-fermenting Pelobacter strains. Genome assembly and annotation produced three novel genomes containing gene sequences for AH, with two copies being present in SFB93. In addition, gene sequences for all five compulsory genes for iron-molybdenum N2ase were also present in the three genomes, indicating the cooccurrence of two acetylene transformation pathways. Nitrogen fixation growth assays showed that DSM3426 could ferment acetylene in the absence of ammonium, but no ethylene was produced. However, SFB93 degraded acetylene and, in the absence of ammonium, produced ethylene, indicating an active N2ase. Diazotrophic growth was observed under N2 but not in experimental controls incubated under argon. SFB93 exhibits acetylene fermentation and nitrogen fixation, the only known biochemical mechanisms for acetylene transformation. Our results indicate complex interactions between N2ase and AH and suggest novel evolutionary pathways for these relic enzymes from early Earth to modern days.

Applied and Environmental Microbiology↗

USGS2014

Characterizing riverbed sediment using high-frequency acoustics 1: spectral properties of scattering

Bed-sediment classification using high-frequency hydro-acoustic instruments is challenging when sediments are spatially heterogeneous, which is often the case in rivers. The use of acoustic backscatter to classify sediments is an attractive alternative to analysis of topography because it is potentially sensitive to grain-scale roughness. Here, a new method is presented which uses high-frequency acoustic backscatter from multibeam sonar to classify heterogeneous riverbed sediments by type (sand, gravel,rock) continuously in space and at small spatial resolution. In this, the first of a pair of papers that examine the scattering signatures from a heterogeneous riverbed, methods are presented to construct spatially explicit maps of spectral properties from geo-referenced point clouds of geometrically and radiometrically corrected echoes. Backscatter power spectra are computed to produce scale and amplitude metrics that collectively characterize the length scales of stochastic measures of riverbed scattering, termed ‘stochastic geometries’. Backscatter aggregated over small spatial scales have spectra that obey a power-law. This apparently self-affine behavior could instead arise from morphological- and grain-scale roughnesses over multiple overlapping scales, or riverbed scattering being transitional between Rayleigh and geometric regimes. Relationships exist between stochastic geometries of backscatter and areas of rough and smooth sediments. However, no one parameter can uniquely characterize a particular substrate, nor definitively separate the relative contributions of roughness and acoustic impedance (hardness). Combinations of spectral quantities do, however, have the potential to delineate riverbed sediment patchiness, in a data-driven approach comparing backscatter with bed-sediment observations (which is the subject of part two of this manuscript).

Journal of Geophysical Research F: Earth Surface↗

USGS2012

Sources of shaking and flooding during the Tohoku-Oki earthquake: a mixture of rupture styles

Modeling strong ground motions from great subduction zone earthquakes is one of the great challenges of computational seismology. To separate the rupture characteristics from complexities caused by 3D sub-surface geology requires an extraordinary data set such as provided by the recent Mw9.0 Tohoku-Oki earthquake. Here we combine deterministic inversion and dynamically guided forward simulation methods to model over one thousand high-rate GPS and strong motion observations from 0 to 0.25 Hz across the entire Honshu Island. Our results display distinct styles of rupture with a deeper generic interplate event (~Mw8.5) transitioning to a shallow tsunamigenic earthquake (~Mw9.0) at about 25 km depth in a process driven by a strong dynamic weakening mechanism, possibly thermal pressurization. This source model predicts many important features of the broad set of seismic, geodetic and seafloor observations providing a major advance in our understanding of such great natural hazards.

Earth and Planetary Science Letters↗

USGS2000

High-resolution seismic reflection to delineate shallow gas in Eastern Kansas

Unique amplitude characteristics of shallow gas sands within Pennsylvanian clastic-carbonate dominated sequences are discernible on high-resolution seismic reflection data in eastern Kansas. Upward grading sequences of sand into shale represent a potential gas reservoir with a low-impedence acoustic contrast at the base of the encasing layer. The gas sand and encasing shale, which define the gas reservoir studied here, are part of an erosional incised valley where about 30 m of carbonates and shale have been replaced by sandstone and shale confined to the incised valley. These consolidated geologic settings would normally possess high impedence gas sand reservoirs as defined by abrupt contacts between the gas sand and encasing shale. Based orr core and borehole logs, the gas sand studied here grades from sand into shale in a fashion analogous to that observed in classic low-impedance environments. Amplitude and phase characteristics of high-resolution seismic data across this approximately 400-m wide gas sand are indicative of a low-impedance reservoir. Shot gathers possess classic amplitude with offsett-dependent characteristics which are manifeted on the stacked section as "bright spots." Dominant Frequencies of around 120 Hz allow detection of several reflectors within the 30+ meters of sand/shale that make up this localized gas-rich incised valley fill. The gradational nature of the trapping mechanism observed in this gas reservoir would make detection with conventional seismic reflection methods unlikely.

The Compass: Earth Science Journal of Sigma Gamma ↗

USGS2018

Drought and land-cover conditions in the Great Plains

Land–atmosphere interactions play a critical role in the Earth system, and a better understanding of these interactions could improve weather and climate models. The interaction among drought, vegetation productivity, and land cover is of particular significance. In a semiarid environment, such as the U.S. Great Plains, droughts can have a large influence on the productivity of agriculture and grasslands, with serious environmental and economic impacts. Here, we used the vegetation drought response index (VegDRI) drought indicator to investigate the response of vegetation to weather and climate for land-cover types in the Great Plains in the United States from 1989 to 2012. We found that analysis that focused on land-cover types within ecoregion divisions provided substantially more and land-cover-based detail on the timing and intensity of drought than did summarizing across the entire Great Plains region. In the northern Great Plains, VegDRI measured more frequent drought impacts on vegetation in the western ecoregions than in the eastern ecoregions. Across the ecoregions of the Great Plains, drought impacts on vegetation were more commonly found in grassland than in cropland. For example, in the “Northwestern Great Plains” ecoregion (which encompasses areas of Montana, Wyoming, North Dakota, South Dakota, and Nebraska), grassland and nonirrigated cropland were observed in VegDRI to have historical fractional drought coverages in the growing season of 17% and 11%, respectively.

Great Plains↗

USGS2023

Predicting climate change impacts on poikilotherms using physiologically guided species abundance models

Poikilothermic animals comprise most species on Earth and are especially sensitive to changes in environmental temperatures. Species conservation in a changing climate relies upon predictions of species responses to future conditions, yet predicting species responses to climate change when temperatures exceed the bounds of observed data is fraught with challenges. We present a physiologically guided abundance (PGA) model that combines observations of species abundance and environmental conditions with laboratory-derived data on the physiological response of poikilotherms to temperature to predict species geographical distributions and abundance in response to climate change. The model incorporates uncertainty in laboratory-derived thermal response curves and provides estimates of thermal habitat suitability and extinction probability based on site-specific conditions. We show that temperature-driven changes in distributions, local extinction, and abundance of cold, cool, and warm-adapted species vary substantially when physiological information is incorporated. Notably, cold-adapted species were predicted by the PGA model to be extirpated in 61% of locations that they currently inhabit, while extirpation was never predicted by a correlative niche model. Failure to account for species-specific physiological constraints could lead to unrealistic predictions under a warming climate, including underestimates of local extirpation for cold-adapted species near the edges of their climate niche space and overoptimistic predictions of warm-adapted species.

Minnesota↗

USGS2020

Installation and performance of the Albuquerque Seismological Laboratory small-aperture posthole array

The Global Seismographic Network (GSN) has been used extensively by seismologists to characterize large earthquakes and image deep earth structure. Although the network’s original design goals have been met, the seismological community has suggested that the incorporation of small-aperture seismic arrays at select sites may improve performance of the network and enable new observations. As a pilot study for this concept, we have created a 500 m aperture, nine-element broadband seismic array around the GSN station ANMO (Albuquerque, New Mexico) at the U.S. Geological Survey Albuquerque Seismological Laboratory (ASL). The array was formed by supplementing the secondary borehole seismometer (90 m depth) at ANMO with eight additional 2.6 m posthole sites. Each station’s seismometer was oriented using a fiber optic gyroscope to within 2.0° of north. Data quality, particularly on the vertical components, is excellent with median power levels closely tracking the secondary sensor at ANMO at frequencies lower than 1 Hz. Horizontal component data are more variable at low frequencies (< 0:02 Hz), with the type of installation and local geography appearing to strongly influence the amount of tilt-induced noise. Throughout the article, we pose several fundamental questions related to the variability and precision of seismic wavefield measurements that we seek to address with data from this array. In addition, we calculate the array response and show a few examples of using the array to obtain back azimuths of a local event and a continuous narrowband noise source. The apparent velocity of the event across the array is then used to infer the local P-wave velocity at the ASL. Near real-time data collected from the array along with collocated meteorological, magnetic, and infrasound data are freely available in near-real time from the Incorporated Research Institutions for Seismology Data Management Center.

New Mexico↗

USGS2000

Pore fluid pressure, apparent friction, and Coulomb failure

Many recent studies of stress-triggered seismicity rely on a fault failure model with a single free parameter, the apparent coefficient of friction, presumed to be a material constant with possible values 0 ≤ μ′ ≤ 1. These studies may present a misleading view of fault strength and the role of pore fluid pressure in earthquake failure. The parameter μ′ is intended to incorporate the effects of both friction and pore pressure, but is a material constant only if changes in pore fluid pressure induced by changes in stress are proportional to the normal stress change across the potential failure plane. Although specific models of fault zones permit such a relation, neither is it known that fault zones within the Earth behave this way, nor is this behavior expected in all cases. In contrast, for an isotropic homogeneous poroelastic model the pore pressure changes are proportional to changes in mean stress, μ′ is not a material constant, and −∞ ≤ μ′ ≤ +∞. Analysis of the change in Coulomb failure stress for tectonically loaded reverse and strike-slip faults shows considerable differences between these two pore pressure models, suggesting that such models might be distinguished from one another using observations of triggered seismicity (e.g., aftershocks). We conclude that using the constant apparent friction model exclusively in studies of Coulomb failure stress is unwise and could lead to significant errors in estimated stress change and seismic hazard.

Journal of Geophysical Research B: Solid Earth↗

USGS1980

Water-level monitoring along San Andreas and San Jacinto faults, southern California, during fiscal year 1980

Beginning in October 1976, a program of water-level monitoring of abandoned water wells was initiated in the Palmdale area with the purpose of identifying possible water-level changes premonitory to a major earthquake on the San Andreas fault. In October 1977, the program was extended southeastward along the rift zone to the Valyermo area. In November 1977, the monitoring of water wells along the San Jacinto fault was initiated with the expectation of experiencing a moderate size earthquake while monitoring was in progress. Currently over thirty wells are being monitored. Eleven wells are monitored continuously with Stevens Type F recorders, two of which have been modified to operate with the Caltech Remote Observatory Support Systems (TIMS). The remaining wells are probed weekly, or in some cases semi-weekly or daily, by volunteers. We are endeavoring to improve the volunteer program by increasing the frequency of measurements and simplifying the procedure to minimize measurement errors. Weekly water-level data are displayed on computer-generated hydrographs for each well. Rainfall and earthquakes are plotted on the graphs for direct comparison with water levels. The hydrographs are updated and reviewed weekly. Weekly hydrographs are also prepared from recorder charts on two wells maintained by W. R. Moyle, Jr., of the U.S. Geological Survey, Water Resources Division Office, Laguna Niguel, California. A M5.5 earthquake occurred on 25 February 1980, between the Buck Ridge and San Jacinto strands of the San Jacinto fault zone, about 8 miles east-southeast of Anza. This is the largest earthquake which has occurred on the faults within our monitoring network. The Stevens recorder chart for well number 11S/6E-3N4 located in Borrego Valley about 20 miles southeast of the epicenter indicates that, during a period of about four hours on 21 February, the water level rose 1.5 to 1.6 feet and returned to its prior level. This is one of the most remarkable short-term water-level fluctuations observed during our monitoring program; it occurred about 88 hours prior to the earthquake. This well has been monitored since October 1977 and has had a Stevens recorder since October 1978. Long-term water levels have been remarkably steady compared to those in other wells we are monitoring. This well shows a strong response to earth tides. The Stevens record on a second well in Borrego Valley (11S/6E-1C1) showed a much smaller (0.1 foot) spike in water level at the same time as the spike in well number 11S/6E-3N4. Other continuously recording wells in Anza and Ocotillo Wells showed no identifiable water-level anomalies. The two wells in Borrego Valley which showed possible strain-induced water-level spikes appear to be more sensitive to earth tides than wells in the same area which did not show spikes in water level. We cannot conceive of any nontectonic cause for the spike on the Stevens record of well 11S/6E3N4. A creep event on the Coyote Creek fault about four miles from the well is one possibility. Because the spikes in the two wells in Borrego Valley are unique for the long-term record of these wells, they may represent precursors to the 25 February earthquake. Local seismic activity was also recorded in water levels of the two wells in Borrego Springs with continuous water-level recorders. One well showed peculiar high frequency water-level fluctuations from 22 July to 21 August 1980; since then the record has appeared normal. Several wells in the Palmdale-Valyermo area have shown peculiar changes in water level within the past year or so. The long-term hydrograph of well number 5N/12W-4H1 shows the most unusual behavior. The well showed no response to the 1977 and very heavy 1978 rainstorms, yet began to rise in early 1979 and continued to rise through the dry season of 1979. By comparison, most wells show a more normal seasonal response to rainfall. Eight wells in the Palmdale-Valyermo area have shown water-level changes which are different than would have been predicted from the previous history of water-level changes and seasonal rainfall. A longer period of observation is required to determine whether the changes are anomalous. Changes in the strain pattern and other geophysical phenomena have also been observed in southern California during about the same period as the water-level changes. If the water-level changes are the result of tectonic strain, the mechanism and significance are unknown. However, it is interesting that five of the eight wells with possibly anomalous water-level changes have been identified as good strain meters based on their response to earth tides. Six wells showing an unexpected rise in water level are located west of the earthquake swarm which occurred in 1976-1977 (McNally et al, 1978), whereas the two which show water levels lower than would have been predicted are located east of the earthquake swarm.

California↗