SEARCH · Search USGS

Results for “Elements”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources

USGS1979

Documentation of a finite-element two-layer model for simulation of ground-water flow

This report documents a finite-element model for simulation of ground- water flow in a two-aquifer system where the two aquifers are coupled by a leakage term that represents flow through a confining layer separating the two aquifers. The model was developed by Timothy J. Durbin (U.S. Geological Survey) for use in ground-water investigations in southern California. The documentation assumes that the reader is familiar with the physics of ground-water flow, numerical methods of solving partial-differential equations, and the FORTRAN IV computer language. It was prepared as part of the investigations made by the U.S. Geological Survey in cooperation with the San Bernardino Valley Municipal Water District.

Water-Resources Investigations Report↗

USGS1983

Preliminary plasma spectrometric analyses for selected elements in some geothermal waters from Cerro Prieto, Mexico

As part of a cooperative study with Dr. Alfred Truesdell, water samples collected from geothermal power production wells at Cerro Prieto, Mexico, were analyzed for selected elements by d.c. argon plasma emission spectroscopy. Spectral interferences due to the presence of high concentrations of Ca, Si, Na and K in these water affected the apparent concentration values obtained. These effects were evaluated and correction techniques were developed and applied to the analytical values. Precipitates present in the samples at the time of analysis adversely affected the accuracy, precision and interpretability of the data. (USGS)

Water-Resources Investigations Report↗

USGS1984

AQUIFEM-SALT; a finite-element model for aquifers containing a seawater interface

Described are modifications to AQUIFEM, a finite element areal ground-water flow model for aquifer evaluation. The modified model, AQUIFEM-SALT, simulates an aquifer containing a freshwater body that freely floats on seawater. Parts of the freshwater lens may be confined above and below by less permeable units. Theory, code modifications, and model verification are discussed. A modified input data list is included. This report is intended as a companion to the original AQUIFEM documentation. (USGS)

Water-Resources Investigations Report↗

USGS1984

Finite-element simulation of ground-water flow in the vicinity of Yucca Mountain, Nevada-California

A finite-element model of the groundwater flow system in the vicinity of Yucca Mountain at the Nevada Test Site was developed using parameter estimation techniques. The model simulated steady-state ground-water flow occurring in tuffaceous, volcanic , and carbonate rocks, and alluvial aquifers. Hydraulic gradients in the modeled area range from 0.00001 for carbonate aquifers to 0.19 for barriers in tuffaceous rocks. Three model parameters were used in estimating transmissivity in six zones. Simulated hydraulic-head values range from about 1,200 m near Timber Mountain to about 300 m near Furnace Creek Ranch. Model residuals for simulated versus measured hydraulic heads range from -28.6 to 21.4 m; most are less than +/-7 m, indicating an acceptable representation of the hydrologic system by the model. Sensitivity analyses of the model 's flux boundary condition variables were performed to assess the effect of varying boundary fluxes on the calculation of estimated model transmissivities. Varying the flux variables representing discharge at Franklin Lake and Furnace Creek Ranch has greater effect than varying other flux variables.

California, Nevada↗

USGS1984

A finite-element simulation model for saturated-unsaturated, fluid-density-dependent ground-water flow with energy transport or chemically- reactive single-species solute transport

SUTRA (Saturated-Unsaturated Transport) is a computer program which can be used to simulate the movement of fluid and the transport of either energy or dissolved substances in a subsurface environment. The model employs a two-dimensional hybrid finite-element and integrated-finite-difference method to approximate the governing equations that describe the two interdependent processes that are simulated by SUTRA: (1) fluid density-dependent saturated or unsaturated groundwater flow, and either (2a) transport of a solute in the groundwater, in which the solute may be subject to: equilibrium adsorption on the porous matrix, and both first-order and zero-order production or decay, or, (2b) transport of thermal energy in the groundwater and solid matrix of the aquifer. SUTRA provides, as the primary calculated results, fluid pressures and either solute concentrations or temperatures, as they vary with time, everywhere in the simulated subsurface system. SUTRA may also be used to simulate simpler subsets of the above process. SUTRA may be employed for areal and cross-sectional models of saturated groundwater flow systems, and for cross-sectional models of unsaturated zone flow. Solute transport simulation using SUTRA may be used to simulate natural or man-induced chemical transport, solute sorption, production and decay. SUTRA may be used for simulation of variable density leachate movement, and for cross-sectional simulation of salt-water intrusion in aquifers at near-well or regional scales, with either dispersed or relatively sharp transition zones between fresh water and salt water. SUTRA energy transport simulation may be employed to model thermal regimes in aquifers, subsurface heat conduction, aquifer thermal energy storage systems, geothermal reservoirs, thermal pollution of aquifers, and natural hydrogeologic convection systems. (USGS)

Water-Resources Investigations Report↗

USGS1986

A reconnaissance water-quality appraisal of the Fountain Creek alluvial aquifer between Colorado Springs and Pueblo, Colorado, including trace elements and organic constituents

This report describes the hydrology and chemical quality of water in the stream-aquifer system along Fountain Creek and relates groundwater quality to land use, water use, and wastewater discharges. The alluvial aquifer, which is underlain by shale bedrock, is transmissive, extensively pumped, and primarily is recharged by Fountain Creek and irrigation-return flow. Groundwater flows south about 20 ft/day, average residence time is less than 10 yr. Land use primarily is urban in the northern one-third and agricultural in the southern two-thirds of the area. Major ions, boron, iron, lithium, selenium, strontium, and uranium increased in concentration downgradient. The largest concentrations of nitrogen and detergents were in the northern end of the area because of recharge of sewage effluent in Fountain Creek. Other trace elements usually were present in concentrations less than 20 mg/L. Volatile organic compounds were detected in water from 11 of 20 wells sampled. Samples from 4 of the 20 wells were analyzed for semivolatile organics using a closed-loop stripping technique, which detected additional compounds at nanogram/L concentrations. (USGS)

Water-Resources Investigations Report↗

USGS1988

A finite-element model for simulating hydraulic interchange of surface and ground water

A model was developed to be useful for predicting changes in streamflow as a result of groundwater pumping. The stream aquifer model is especially useful for simulating streams that flow intermittently owing to leakage to the aquifer or diversion for irrigation or streams that become perched owing to declining hydraulic head in the aquifer. The model couples the equation of two-dimensional groundwater flow with the kinematic equations of one-dimensional open-channel flow. Darcy 's law for vertical flow through a semipermeable streambed is used to couple the groundwater flow and streamflow equations. The equations of flow are approximated numerically by the finite-element method. A listing of the Fortran program that solves the equations of flow , and a description of data-input formats are given in the report. The program can simulate a variety of hydrologic characteristics including perched streams, streamflow diversions , springs, recharge from irrigated acreage, and evapotranspiration from the water table and phreatophytes. Time-dependent boundary conditions can be simulated. The program can be modified easily to simulate unconfined aquifers and aquifers with variable directions of anisotropy. (USGS)

Water-Resources Investigations Report↗

USGS1994

Assessment of concentrations of trace elements in ground water and soil at the Small-Arms Firing Range, Shaw Air Force Base, South Carolina

Ground-water samples were collected from four shallow water-table aquifer observation wells beneath the Small-Arms Firing Range study area at Shaw Air Force Base. Water-chemistry analyses indicated that total lead concentrations in shallow ground water beneath the study area do not exceed the U.S. Environmental Protection Agency maximum contaminant level established for lead in drinking water (0.05 milligrams per liter). All other trace element total concentrations in ground water beneath the study area were at or below the detection limit of the analytical methodology.

South Carolina↗

USGS1999

Summary of information on synthetic organic compounds and trace elements in tissue of aquatic biota, Clark Fork-Pend Oreille and Spokane River basins, Montana, Idaho, and Washington, 1974-96

As part of the Northern Rockies Intermontane Basins study of the National Water-Quality Assessment Program, data collected between 1974 and 1996 were compiled to describe contaminants in tissue of riverine species. Tissue-contaminant data from 11 monitoring programs and studies representing 28 sites in the study area were summarized. Tissue-contaminant data for most streams generally were lacking. Many studies have focused on and around mining-affected areas on the Clark Fork and Coeur d'Alene Rivers and their major tributaries. DDT and PCBs and their metabolites and congeners were the synthetic organic contaminants most commonly detected in fish tissue. Fish collected from the Spokane River in Washington contained elevated concentrations of PCB arochlors, some of which exceeded guidelines for the protection of human health and predatory wildlife. Tissue samples of fish from the Flathead River watershed contained higher-than-expected concentrations of PCBs, which might have resulted from atmospheric transport. Trace element concentrations in fish and macroinvertebrates collected in and around mining areas were elevated compared with background concentrations. Some cadmium, copper, lead, and mercury concentrations in fish tissue were elevated compared with results from other studies, and some exceeded guidelines. Macroinvertebrates from the Coeur d'Alene River contained higher concentrations of cadmium, lead, and zinc than did macroinvertebrates from other river systems in mining-affected areas. A few sportfish fillet samples, most from the Spokane River in Washington, were collected to assess human health risk. Concentrations of PCBs in these fillets exceeded screening values for the protection of human health. At present, there is no coordinated, long-term fish tissue monitoring program for rivers in the study area, even though contaminants are present in fish at levels considered a threat to human health. Development of a coordinated, centralized national data base for contaminants in fish tissue is needed. The National Water-Quality Assessment Program can provide a framework for other agencies to evaluate tissue contaminants in the Northern Rockies Intermontane Basins study area. As of 1996, there are no fish consumption advisories or fishing restrictions as a result of elevated contaminants on any rivers within the study area.

Idaho, Montana, Washington↗

USGS2000

Analysis of nutrients, selected inorganic constituents, and trace elements in water from Illinois community-supply wells, 1984–91

The lower Illinois River Basin (LIRB) study unit is part of the National Water-Quality Assessment program that includes studies of most major aquifer systems in the United States. Retrospective water-quality data from community-supply wells in the LIRB and in the rest of Illinois are grouped by aquifer and depth interval. Concentrations of selected chemical constituents in water samples from community-supply wells within the LIRB vary with aquifer and depth of well. Ranked data for 16 selected trace elements and nutrients are compared by aquifer, depth interval, and between the LIRB and the rest of Illinois using nonparametric statistical analyses. For all wells, median concentrations of nitrate and nitrite (as Nitrogen) are highest in water samples from the Quaternary aquifer at well depths less than 100 ft; ammonia concentrations (as Nitrogen), however, are highest in samples from well depths greater than 200 ft. Chloride and sulfate concentrations are higher in samples from the older bedrock aquifers. Arsenic, lead, sulfate, and zinc concentrations are appreciably different between samples from the LIRB and samples from the rest of Illinois for ground water from the Quaternary aquifer. Arsenic concentration is highest in the deep Quaternary aquifer. Chromium, cyanide, lead, and mercury are not frequently detected in water samples from community-supply wells in Illinois.

Illinois↗

USGS1984

A Galerkin finite-element flow model to predict the transient response of a radially symmetric aquifer

A computer program developed to evaluate radial flow of ground water, such as at a pumping well, recharge basin, or injection well, is capable of simulating anisotropic, inhomogenous, confined, or pseudo-unconfined (constant saturated thickness) conditions. Results compare well with those calculated from published analytical and model solutions. The program is based on the Galerkin finite-element technique. A sample model run is presented to illustrate the use of the program; supplementary material provides the program listing as well as a sample problem data set and output. From the text and other material presented, one can use the program to predict drawdowns from pumping and ground-water buildups from recharge in a radially symmetric ground-water system.

Water Supply Paper↗

USGS2005

Composition and trace element content of coal in Taiwan

To investigate the trace element contents of local coal, four coal samples were collected from operating mines in NW Taiwan. Detailed petrographic and chemical characterization analyses were then conducted. Analytical results indicate that (1) the samples were high volatile bituminous coal in rank with ash content ranging from 4.2 to 14.4% and with moisture content ranging from 2.7 to 4.6%; (2) the macerals were mostly composed of vitrinite with vitrinite reflectance less than 0.8%; (3) the sample of Wukeng mine has the highest Fe 2 O 3 (29.5%), Tl (54.8 ppm), Zn (140 ppm), and As (697 ppm) contents in ash and Hg (2.3 ppm) in the coal. If used properly, these coals should not present health hazards.

Terrestrial, Atmospheric and Oceanic Sciences↗

USGS2024

Influence of organic matter thermal maturity on rare earth element distribution: A study of Middle Devonian black shales from the Appalachian Basin, USA

This study focuses on understanding the association of rare earth elements (REE; lanthanides + yttrium + scandium) with organic matter from the Middle Devonian black shales of the Appalachian Basin. Developing a better understanding of the role of organic matter (OM) and thermal maturity in REE partitioning may help improve current geochemical models of REE enrichment in a wide range of black shales. We studied relationships between whole rock REE content and total organic carbon (TOC) and compared the correlations with a suite of global oil shales that contain TOC as high as 60 wt.%. The sequential leaching of the Appalachian shale samples was conducted to evaluate the REE content associated with carbonates, Fe–Mn oxyhydroxides, sulfides, and organics. Finally, the residue from the leaching experiment was analyzed to assess the mineralogical changes and REE extraction efficiency. Our results show that heavier REE (HREE) have a positive correlation with TOC in our Appalachian core samples. However, data from the global oil shales display an opposite trend. We propose that although TOC controls REE enrichment, thermal maturation likely plays a critical role in HREE partitioning into refractory organic phases, such as pyrobitumen. The REE inventory from a core in the Appalachian Basin shows that (1) the total REE ranges between 180 and 270 ppm and the OM-rich samples tend to contain more REE than the calcareous shales; (2) there is a relatively higher abundance of middle REE (MREE) to HREE than lighter REE (LREE); (3) there is a disproportionate increase in Y and Tb with TOC likely due to the rocks being over-mature; and (4) the REE extraction demonstrates that although the OM has higher HREE concentration, the organic leachates contain more LREE, suggesting it is more challenging to extract HREE from OM than using traditional leaching techniques.

Middle Devonian Appalachian Basin↗

USGS2024

Tungsten skarn quantitative mineral resource assessment and gold, rare earth elements, graphite, and uranium qualitative assessments of the Kuldjuktau and Auminzatau Ranges, in the central Kyzylkum region, Uzbekistan

A new quantitative mineral resource assessment for tungsten skarn was conducted for the Auminzatau and Kuldjuktau mountain ranges in Central Uzbekistan, along with qualitative assessments of orogenic gold, rare earth elements (REEs), amorphous graphite, and uranium. By integrating a variety of geological, geochemical, geophysical, and remote sensing data sets, estimates of undiscovered tungsten skarn deposits in permissive tracts are combined with grade and tonnage distributions of known deposits to generate probabilistic estimates of undiscovered resources. Undiscovered deposits in Auminzatau are estimated to contain median resources of 98 thousand metric tons (kt) of WO 3 with a 70 percent (%) probability of at least 28 kt and a 10% probability of at least 468 kt, of which 16 kt to 293 kt may be economic to extract. In Kuldjuktau, the undiscovered deposits are estimated to contain median resources of 27 kt of WO 3 with a 60% probability of at least 12 kt and a 10% probability of at least 208 kt, of which 5 kt to 132 kt may be economic to extract. Our results suggest that the Auminzatau–Kuldjuktau Mountains area is highly prospective for additional discovery of significant Au and U resources and has low prospectivity for discovery of significant REE and graphite resources.

Minerals↗

USGS2016

Marine phosphorites as potential resources for heavy rare earth elements and yttrium

Marine phosphorites are known to concentrate rare earth elements and yttrium (REY) during early diagenetic formation. Much of the REY data available are decades old and incomplete, and there has not been a systematic study of REY distributions in marine phosphorite deposits that formed over a range of oceanic environments. Consequently, we initiated this study to determine if marine phosphorite deposits found in the global ocean host REY concentrations of high enough grade to be of economic interest. This paper addresses continental-margin (CM) and open-ocean seamount phosphorites. All 75 samples analyzed are composed predominantly of carbonate fluorapatite and minor detrital and authigenic minerals. CM phosphorites have low total REY contents (mean 161 ppm) and high heavy REY (HREY) complements (mean 49%), while seamount phosphorites have 4–6 times higher individual REY contents (except for Ce, which is subequal; mean ΣREY 727 ppm), and very high HREY complements (mean 60%). The predominant causes of higher concentrations and larger HREY complements in seamount phosphorites compared to CM phosphorites are age, changes in seawater REY concentrations over time, water depth of formation, changes in pH and complexing ligands, and differences in organic carbon content in the depositional environments. Potential ore deposits with high HREY complements, like the marine phosphorites analyzed here, could help supply the HREY needed for high-tech and green-tech applications without creating an oversupply of the LREY.

Minerals↗

USGS2011

Fluid sources and metallogenesis in the Blackbird Co-Cu-Au-Bi-Y-REE district, Idaho, U.S.A.: Insights from major-element and boron isotopic compositions of tourmaline

Tourmaline is a widespread mineral in the Mesoproterozoic Blackbird Co–Cu–Au–Bi–Y–REE district, Idaho, where it occurs in both mineralized zones and wallrocks. We report here major-element and B-isotope compositions of tourmaline from stratabound sulfide deposits and their metasedimentary wallrocks, from mineralized and barren pipes of tourmaline breccia, from late barren quartz veins, and from Mesoproterozoic granite. The tourmalines are aluminous, intermediate in the schorl–dravite series, with Fe/(Fe + Mg) values of 0.30 to 0.85, and 10 to 50% X -site vacancies. Compositional zoning is prominent only in tourmaline from breccias and quartz veins; crystal rims are enriched in Mg, Ca and Ti, and depleted in Fe and Al relative to cores. The chemical composition of tourmaline does not correlate with the presence or absence of mineralization. The δ 11 B values fall into two groups. Isotopically light tourmaline (−21.7 to −7.6‰) occurs in unmineralized samples from wallrocks, late quartz veins and Mesoproterozoic granite, whereas heavy tourmaline (−6.9 to +3.2‰) is spatially associated with mineralization (stratabound and breccia-hosted), and is also found in barren breccia. At an inferred temperature of 300°C, boron in the hydrothermal fluid associated with mineralization had δ 11 B values of −3 to +7‰. The high end of this range indicates a marine source of the boron. A likely scenario involves leaching of boron principally from marine carbonate beds or B-bearing evaporites in Mesoproterozoic strata of the region. The δ 11 B values of the isotopically light tourmaline in the sulfide deposits are attributed to recrystallization during Cretaceous metamorphism, superimposed on a light boron component derived from footwall siliciclastic sediments ( e.g. , marine clays) during Mesoproterozoic mineralization, and possibly a minor component of light boron from a magmatic–hydrothermal fluid. The metal association of Bi–Be–Y–REE in the Blackbird ores suggests some magmatic input, but involvement of granite-derived fluids cannot be conclusively established from the present database.

Canadian Mineralogist↗

USGS2020

Coordination of planetary coordinate system recommendations by the IAU Working Group on Cartographic Coordinates and Rotational Elements–2020 status and future

Our goal is to request input from the lunar and planetary community regarding issues of planetary coordinate systems and cartography standards. We begin with an overview of the work of the International Astronomical Union Working Group on Cartographic Coordinates and Rotational Elements. We briefly describe the operations and membership of the Working Group, some of the various uses of the recommendations it makes, our most recent (2018) published report and the recommendations therein, and the outlook for our next such report. We then consider several issues and questions regarding the future of the Working Group and regarding planetary cartography and planetary data spatial infrastructure in general. This includes possible near-term projects, how we and others might collect and consider community input and includes some ideas regarding possible outcomes or future work that will need to be addressed by the Working Group or other organizations.

Conference Paper↗

USGS2023

A recently discovered trachyte-hosted rare earth element-niobium-zirconium occurrence in northern Maine, USA

Reported here are geological, geophysical, mineralogical, and geochemical data on a previously unknown trachyte-hosted rare earth element (REE)-Nb-Zr occurrence at Pennington Mountain in northern Maine, USA. This occurrence was newly discovered by a regional multiparameter, airborne radiometric survey that revealed anomalously high equivalent Th (eTh) and U (eU), confirmed by a detailed ground radiometric survey and by portable X-Ray fluorescence (pXRF) and whole-rock analyses of representative rock samples. The mineralized area occurs within an elongate trachyte body (~1.2 km 2 ) that intrudes Ordovician volcanic rocks. Geologic constraints suggest that the trachyte is also Ordovician in age. The eastern lobe (~900 × ~400 m) of the trachyte is pervasively brecciated with a matrix containing seams, lenses, and veinlets composed mainly of potassium feldspar, albite, and fine-grained zircon and monazite. Barite is locally abundant. Minor minerals within the matrix include columbite, bastnäsite, euxenite, chlorite, pyrite, sphalerite, and magnetite. The pXRF analyses of 22 samples (App. Table A1) collected from the eastern lobe demonstrate that this entire part of the trachyte is highly mineralized. Whole-rock geochemical analyses for samples from the eastern lobe document high average contents of Zr (1.17 wt %), Nb (1,656 ppm), Ba (3,132 ppm), Y (1,140 ppm), Hf (324 ppm), Ta (122 ppm), Th (124 ppm), U (36.5 ppm), Zn (689 ppm), and Sn (106 ppm). Among light REE, the highest average concentrations are shown by La (763 ppm) and Ce (1,479 ppm). For heavy REE (HREE), Dy and Er are the most abundant on average (167 and 114 ppm, respectively). No HREE-rich minerals such as xenotime have been identified; the HREE may reside chiefly in monazite and bastnäsite, and within the fine-grained zircon. Very strong positive correlations (R 2 ) of 0.92 to 0.98 exist between Th and Zr, Nb, Y, Ce, Yb, and Sn, indicating that the radiometric data for eTh are valid proxies for concentrations of these metals in the mineralized rocks.

Maine↗