Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sensors”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
USGS2016

High spatio-temporal resolution observations of crater-lake temperatures at Kawah Ijen volcano, East Java, Indonesia

The crater lake of Kawah Ijen volcano, East Java, Indonesia, has displayed large and rapid changes in temperature at point locations during periods of unrest, but measurement techniques employed to-date have not resolved how the lake’s thermal regime has evolved over both space and time. We applied a novel approach for mapping and monitoring variations in crater-lake apparent surface (“skin”) temperatures at high spatial (~32 cm) and temporal (every two minutes) resolution at Kawah Ijen on 18 September 2014. We used a ground-based FLIR T650sc camera with digital and thermal infrared (TIR) sensors from the crater rim to collect (1) a set of visible imagery around the crater during the daytime and (2) a time series of co-located visible and TIR imagery at one location from pre-dawn to daytime. We processed daytime visible imagery with the Structure-from-Motion photogrammetric method to create a digital elevation model onto which the time series of TIR imagery was orthorectified and georeferenced. Lake apparent skin temperatures typically ranged from ~21 to 33oC. At two locations, apparent skin temperatures were ~ 4 and 7 oC less than in-situ lake temperature measurements at 1.5 and 5 m depth, respectively. These differences, as well as the large spatio-temporal variations observed in skin temperatures, were likely largely associated with atmospheric effects such as evaporative cooling of the lake surface and infrared absorption by water vapor and SO2. Calculations based on orthorectified TIR imagery thus yielded underestimates of volcanic heat fluxes into the lake, whereas volcanic heat fluxes estimated based on in-situ temperature measurements (68 to 111 MW) were likely more representative of Kawah Ijen in a quiescent state. The ground-based imaging technique should provide a valuable tool to continuously monitor crater-lake temperatures and contribute insight into the spatio-temporal evolution of these temperatures associated with volcanic activity.

Kawah Ijen volcano↗
USGS2019

Overview, chronology, and impacts of the 2016–2017 eruption of Bogoslof volcano, Alaska

The 2016–2017 eruption of Bogoslof volcano, a back-arc shallow submarine volcano in Alaska’s Aleutian arc, began in December 2016 and included 70 explosive events and at least two episodes of subaerial dome building. Because the volcano had no local monitoring stations during the eruption, a combination of distant seismic stations, regional infrasound sensors, lightning detection, a variety of satellite data and observer reports, and a field visit in 2018, were used to recreate the events that occurred during the nine-month eruption. Following precursory seismicity that started in September 2016, the eruption began in December 2016 with a series of explosive events that persisted through mid-March 2017. After a 6-week hiatus, activity resumed on May 17 and lasted through the end of August 2017 and consisted of additional explosions and two short-lived subaerial lava domes that formed in June and August. For most of the eruption, Bogoslof’s vent was submerged in shallow seawater, though during several of the longer events a subaerial edifice grew, and the vent migrated above sea level resulting in more ash-rich volcanic clouds. Eruptive products, geophysical signals, and eruptive style are all broadly consistent with vulcanian activity where slow magma ascent led to repetitive dome or plug formation, overpressurization in the upper conduit, and sudden release during short-lived explosions. Infiltration of seawater may have prohibited large domes from forming especially in the first half of the eruption when explosions were closely spaced in time. The largest four explosions in the sequence occurred after inter-event times of 10 days or more. Three events produced ashfall on nearby communities and mariners east and south of Bogoslof and the eruption resulted in dozens of flight cancelations and flight diversions around the volcano and its ash clouds.

Alaska↗
USGS2020

Constraints on eruption processes and event masses for the 2016–2017 eruption of Bogoslof volcano, Alaska, through evaluation of IASI satellite SO2 masses and complementary datasets

Bogoslof volcano, Alaska, experienced at least 70 explosive eruptions between 12 December 2016 and 31 August 2017. Due to its remote location and limited local monitoring network, this eruption was monitored and characterized primarily using remote geophysical and satellite techniques. SO 2 emissions from Bogoslof were persistently detected by the Infrared Atmospheric Sounding Interferometer (IASI) satellite sensors. Of Bogoslof’s 70 explosive events, 50% produced measurable SO 2 masses ranging from 0.1 to 21.5 kt, with a median and standard deviation of 0.7 ± 4.0 kt SO 2 , respectively. Here, we compare IASI-derived SO 2 masses from Bogoslof events to complementary geophysical datasets to provide insights into eruption source processes, namely the degree of seawater scrubbing of water-soluble SO 2 and variations in magma flux. Correlations with the number of lightning strokes and infrasound energy are expected to indicate magma-flux as a controlling process, while correlations with infrasound frequency index are expected to indicate variations in vent-water content as a controlling factor. These comparisons suggest that the measured SO 2 masses are primarily a function of eruption magnitude (degassed magma mass) and that scrubbing of SO 2 emissions by vent seawater may have exerted a minor effect on the observed SO 2 masses. SO 2 masses were combined with petrologic constraints on melt inclusion and matrix glass S concentrations to calculate degassed magma masses and volumes. The cumulative SO 2 -derived degassed magma mass and estimated volume (dense-rock equivalent) for the full Bogoslof eruption were found to be 2.8 × 10 10 kg and 9.3 × 10 6 m 3 , respectively. When individual event masses are compared against event masses calculated using an empirical plume-height method, a strong correlation is found ( R 2 = 0.83), with better than order-of-magnitude agreement in most cases. These estimates of eruption masses provide useful information on the magnitude, behavior, and associated hazards of the 2016–2017 eruption, and potentially future unrest at Bogoslof volcano.

Alaska↗
USGS2020

Did ice-charging generate volcanic lightning during the 2016–2017 eruption of Bogoslof volcano, Alaska?

The 2016–2017 shallow submarine eruption of Bogoslof volcano in Alaska injected plumes of ash and seawater to maximum heights of ~ 12 km. More than 4550 volcanic lightning strokes were detected by the World Wide Lightning Location Network (WWLLN) and Vaisala’s Global Lightning Dataset (GLD360) over 9 months. Lightning assisted monitoring efforts by confirming ash-producing explosions in near-real time, but only 32 out of the 70 explosive events produced detectable lightning. What led to electrical activity within some of the volcanic plumes, but not others? And why did the lightning intensity wax and wane over the lifetime of individual explosions? We address these questions using multiparametric observations from ground-based lightning sensors, satellite imagery, photographs, acoustic signals, and 1D plume modeling. Detailed time-series of monitoring data show that the plumes did not produce detectable lightning until they rose higher than the atmospheric freezing level (approximated by − 20 °C temperatures). For example, on 28 May 2017 (event 40), the delayed onset of lightning coincides with modeled ice formation in upper levels of the plume. Model results suggest that microphysical conditions inside the plume rivaled those of severe thunderstorms, with liquid water contents > 5 g m −3 and vigorous updrafts > 40 m s −1 in the mixed-phase region where liquid water and ice coexist. Based on these findings, we infer that ‘thunderstorm-style’ collisional ice-charging catalyzed the volcanic lightning. However, charge mechanisms likely operated on a continuum, with silicate collisions dominating electrification in the near-vent region, and ice charging taking over in the upper-level plumes. A key implication of this study is that lightning during the Bogoslof eruption provided a reliable indicator of sustained, ash-rich plumes (and associated hazards) above the atmospheric freezing level.

Alaska↗
USGS2021

Near-real-time volcanic cloud monitoring: Insights into global explosive volcanic eruptive activity through analysis of Volcanic Ash Advisories

Understanding the location, intensity, and likely duration of volcanic hazards is key to reducing risk from volcanic eruptions. Here, we use a novel near-real-time dataset comprising Volcanic Ash Advisories (VAAs) issued over 10 years to investigate global rates and durations of explosive volcanic activity. The VAAs were collected from the nine Volcanic Ash Advisory Centres (VAACs) worldwide. Information extracted allowed analysis of the frequency and type of explosive behaviour, including analysis of key eruption source parameters (ESPs) such as volcanic cloud height and duration. The results reflect changes in the VAA reporting process, data sources, and volcanic activity through time. The data show an increase in the number of VAAs issued since 2015 that cannot be directly correlated to an increase in volcanic activity. Instead, many represent increased observations, including improved capability to detect low- to mid-level volcanic clouds (FL101–FL200, 3–6 km asl), by higher temporal, spatial, and spectral resolution satellite sensors. Comparison of ESP data extracted from the VAAs with the Mastin et al. (J Volcanol Geotherm Res 186:10–21, 2009a ) database shows that traditional assumptions used in the classification of volcanoes could be much simplified for operational use. The analysis highlights the VAA data as an exceptional resource documenting global volcanic activity on timescales that complement more widely used eruption datasets.

Bulletin of Volcanology↗
USGS2021

Volcanic air pollution and human health: Recent advances and future directions

Volcanic air pollution from both explosive and effusive activity can affect large populations as far as thousands of kilometers away from the source, for days to decades or even centuries. Here, we summarize key advances and prospects in the assessment of health hazards, effects, risk, and management. Recent advances include standardized ash assessment methods to characterize the multiple physicochemical characteristics that might influence toxicity; the rise of community-based air quality monitoring networks using low-cost gas and particulate sensors; the development of forecasting methods for ground-level concentrations and associated public advisories; the development of risk and impact assessment methods to explore health consequences of future eruptions; and the development of evidence-based, locally specific measures for health protection. However, it remains problematic that the health effects of many major and sometimes long-duration eruptions near large populations have gone completely unmonitored. Similarly, effects of prolonged degassing on exposed populations have received very little attention relative to explosive eruptions. Furthermore, very few studies have longitudinally followed populations chronically exposed to volcanic emissions; thus, knowledge gaps remain about whether chronic exposures can trigger development of potentially fatal diseases. Instigating such studies will be facilitated by continued co-development of standardized protocols, supporting local study teams and procuring equipment, funding, and ethical permissions. Relationship building between visiting researchers and host country academic, observatory, and agency partners is vital and can, in turn, support the effective communication of health impacts of volcanic air pollution to populations, health practitioners, and emergency managers.

Bulletin of Volcanology↗
USGS2024

From field station to forecast: Managing data at the Alaska Volcano Observatory

The Alaska Volcano Observatory (AVO) uses multidisciplinary data to monitor and study dozens of active and potentially active volcanoes. Here, we provide an overview of internally and externally generated data types, tools and resources used in their management, and challenges faced. Data sources include the following: (1) a multiparameter (seismic, infrasound, GNSS, web cameras) ground-based monitoring network that spans 3000 km and transmits data in real time; (2) a variety of satellite-borne sensors that provide information about surface change and volcanic emissions; (3) geologic and gas field campaigns; and (4) other external data products that provide situation awareness. Each data type requires distinct acquisition, processing, storage, visualization, and archiving approaches. AVO uses a variety of externally and internally developed tools to handle individual data types as well as multidisciplinary volcanological data. A primary tool is the Geologic Database of Information on Volcanoes in Alaska (GeoDIVA), which stores detailed, searchable information on more than 140 volcanoes and over 1000 eruptions and unrest events, including images, eruption descriptions, and geologic station and sample data, metadata, and analyses. It interacts with other internal tools that store monitoring reports and other operational records. Additional data management resources used by AVO assist with alarms and alerts, state-of-health monitoring, and multiparameter visualization. Requirements for 24/7 accessibility, the ever-expanding portfolio of data, and transitioning new tools from development to operations are all challenges faced by AVO and other volcano observatories. AVO strives to meet FAIR data practices and ensure that data are available to national and international community efforts using external repositories as well as those hosted by AVO and its parent institutions.

Alaska↗
USGS2021

Sap flow evidence of chilling injury and recovery in mangroves following a spring cold spell

Mangroves are periodically influenced in negative ways by non-freezing temperatures across their global sub-tropical range. However, physiological and morphological evidence of chilling influences to non-freezing chilling events has not been measured in field settings. In this study, we measured sap flow ( J s ) during such a chilling (but non-freezing) event in southern China and documented the reductions in J s and the recovery that ensued. We calculated tree water use (TWU) from J s measurements taken from thermal dissipation sap flow sensors on two mangrove species ( Sonneratia apetala and S. caseolaris ). This chilling event significantly injured the mangrove trees in the form of leaf scorch and massive defoliation. Diurnal variations of stem J s of both species were altered significantly after chilling. On the day of the chilling event, J s of S. caseolaris was reduced from the daily maximum of 44.1 g H 2 O m −2 s −1 to 0 immediately after chilling, which lasted throughout the remainder of the day. In contrast, S. apetala showed a certain low-temperature tolerance, while still maintaining an adequate transpiration rate after chilling, indicative of a more resilient hydraulic transport system to low temperatures. The sap flow data collected revealed substantial evidence for acute water conservation during low-temperature events, perhaps ameliorating low-temperature damage. Hence, the responses of some mangrove species with high sensitivity to low, but non-freezing, temperature (such as S. caseolaris ) may indicate that mangroves possess adaptive whole-tree strategies to cold temperature.

Trees: Structure and Function↗
USGS2015

Suspended-sediment dynamics in the tidal reach of a San Francisco Bay tributary

To better understand suspended-sediment transport in a tidal slough adjacent to a large wetland restoration project, we deployed continuously measuring temperature, salinity, depth, turbidity, and velocity sensors in 2010 at a near-bottom location in Alviso Slough (Alviso, California, USA). Alviso Slough is the downstream reach of the Guadalupe River and flows into the far southern end of San Francisco Bay. River flow is influenced by the Mediterranean climate, with high flows (∼90 m 3 s −1 ) correlated to episodic winter storms and low base flow (∼0.85 m 3 s −1 ) during the summer. Storms and associated runoff have a large influence on sediment flux for brief periods, but the annual peak sediment concentrations in the slough, which occur in April and May, are similar to the rest of this part of the bay and are not directly related to peak discharge events. Strong spring tides promote a large upstream sediment flux as a front associated with the passage of a salt wedge during flood tide. Neap tides do not have flood-directed fronts, but a front seen sometimes during ebb tide appears to be associated with the breakdown of stratification in the slough. During neap tides, stratification likely suppresses sediment transport during weaker flood and ebb tides. The slough is flood dominant during spring tides, and ebb dominant during neap tides. Extreme events in landward (salt wedge) and bayward (rainfall events) suspended-sediment flux account for 5.0 % of the total sediment flux in the slough and only 0.55 % of the samples. The remaining 95 % of the total sediment flux is due to tidal transport, with an imbalance in the daily tidal transport producing net landward flux. Overall, net sediment transport during this study was landward indicating that sediment in the sloughs may not be flushed to the bay and are available for sedimentation in the adjacent marshes and ponds.

California↗
USGS2015

Effect of antecedent-hydrological conditions on rainfall triggering of debris flows in ash-fall pyroclastic mantled slopes of Campania (southern Italy)

Mountainous areas surrounding the Campanian Plain and the Somma-Vesuvius volcano (southern Italy) are among the most risky areas of Italy due to the repeated occurrence of rainfallinduced debris flows along ash-fall pyroclastic soil-mantled slopes. In this geomorphological framework, rainfall patterns, hydrological processes taking place within multi-layered ash-fall pyroclastic deposits and soil antecedent moisture status are the principal factors to be taken into account to assess triggering rainfall conditions and the related hazard. This paper presents the outcomes of an experimental study based on integrated analyses consisting of the reconstruction of physical models of landslides, in situ hydrological monitoring, and hydrological and slope stability modeling, carried out on four representative source areas of debris flows that occurred in May 1998 in the Sarno Mountain Range. The hydrological monitoring was carried out during 2011 using nests of tensiometers and Watermark pressure head sensors and also through a rainfall and air temperature recording station. Time series of measured pressure head were used to calibrate a hydrological numerical model of the pyroclastic soil mantle for 2011, which was re-run for a 12-year period beginning in 2000, given the availability of rainfall and air temperature monitoring data. Such an approach allowed us to reconstruct the regime of pressure head at a daily time scale for a long period, which is representative of about 11 hydrologic years with different meteorological conditions. Based on this simulated time series, average winter and summer hydrological conditions were chosen to carry out hydrological and stability modeling of sample slopes and to identify Intensity- Duration rainfall thresholds by a deterministic approach. Among principal results, the opposing winter and summer antecedent pressure head (soil moisture) conditions were found to exert a significant control on intensity and duration of rainfall triggering events. Going from winter to summer conditions requires a strong increase of intensity and/or duration to induce landslides. The results identify an approach to account for different hazard conditions related to seasonality of hydrological processes inside the ash-fall pyroclastic soil mantle. Moreover, they highlight another important factor of uncertainty that potentially affects rainfall thresholds triggering shallow landslides reconstructed by empirical approaches.

Campania↗
USGS2021

When hazard avoidance is not an option: Lessons learned from monitoring the postdisaster Oso landslide, USA

On 22 March 2014, a massive, catastrophic landslide occurred near Oso, Washington, USA, sweeping more than 1 km across the adjacent valley flats and killing 43 people. For the following 5 weeks, hundreds of workers engaged in an exhaustive search, rescue, and recovery effort directly in the landslide runout path. These workers could not avoid the risks posed by additional large-scale slope collapses. In an effort to ensure worker safety, multiple agencies cooperated to swiftly deploy a monitoring and alerting system consisting of sensors, automated data processing and web-based display, along with defined communication protocols and clear calls to action for emergency management and search personnel. Guided by the principle that an accelerating landslide poses a greater threat than a steadily moving or stationary mass, the system was designed to detect ground motion and vibration using complementary monitoring techniques. Near real-time information was provided by continuous GPS, seismometers/geophones, and extensometers. This information was augmented by repeat-assessment techniques such as terrestrial and aerial laser scanning and time-lapse photography. Fortunately, no major additional landsliding occurred. However, we did detect small headscarp failures as well as slow movement of the remaining landslide mass with the monitoring system. This was an exceptional response situation and the lessons learned are applicable to other landslide disaster crises. They underscore the need for cogent landslide expertise and ready-to-deploy monitoring equipment, the value of using redundant monitoring techniques with distinct goals, the benefit of clearly defined communication protocols, and the importance of continued research into forecasting landslide behavior to allow timely warning.

Washington↗
USGS2004

Dust storms and their impact on ocean and human health: dust in Earth's atmosphere

Satellite imagery has greatly influenced our understanding of dust activity on a global scale. A number of different satellites such as NASA's Earth-Probe Total Ozone Mapping Spectrometer (TOMS) and Se-viewing Field-of-view Sensor (SeaWiFS) acquire daily global-scale data used to produce imagery for monitoring dust storm formation and movement. This global-scale imagery has documented the frequent transmission of dust storm-derived soils through Earth's atmosphere and the magnitude of many of these events. While various research projects have been undertaken to understand this normal planetary process, little has been done to address its impact on ocean and human health. This review will address the ability of dust storms to influence marine microbial population densities and transport of soil-associated toxins and pathogenic microorganisms to marine environments. The implications of dust on ocean and human health in this emerging scientific field will be discussed.

EcoHealth↗
USGS2023

Initial comparison of pollen counting methods using precipitation and ambient air samples and automated artificial intelligence to support national monitoring objectives

Given the endemic nature of pollen throughout the environment, the impact upon human health, and the need for more extensive and better measurements of pollen in the USA, a preliminary project within the National Atmospheric Deposition Program’s (NADP) National Trends Network (NTN) was developed. Pollen was measured in ambient air by several methods and in precipitation wet deposition samples at three monitoring sites in the NTN. A method for counting pollen on filters was developed and provided pollen counts for NADP atmospheric wet-deposition samples and high-volume ambient air samplers (HVAS) for comparison with co-located traditional National Allergy Bureau microscopy samples and a commercially available pollen sensor (PS) counting method during the 2021 pollen season. The goals of this project were to test the potential of available air-monitoring infrastructures to obtain improved spatial measurements of aeroallergens, compare pollen counting results from the various methods, and to determine the suitability of using wet deposition samples for pollen collection. The onset and senescence of pollen seasons for general categories of genera compared favorably for each method at each site, indicating that pollen monitoring using wet-deposition and ambient air sampling filters could provide useful information to inform scientific studies, but not likely for public health objectives. Pollen counts were log transformed for Pearson product moment correlation. Tree pollen counts were correlated at all sites for daily PS data and traditional counting data ( R = 0.69–0.84), but statistical correlations between methods for grass and weed pollen were weak (0.40 < R < 0.60) or considered not correlated ( R < 0.40). Total pollen counts in NADP precipitation samples were correlated with traditional and PS counts at only one of three sites. Pollen counts for the weekly HVAS filter samples were correlated with PS counts for trees ( R = 0.62) and with NAB counts for trees ( R = 0.68) and weeds ( R = 0.72). Correlations in the data between methods suggest that, given further methods development, a variety of techniques could be integrated to expand and enhance existing pollen monitoring networks. Improved ambient air and atmospheric deposition sampling methods specifically targeted for pollen capture and analysis could support the collection of accurate and efficient meaningful aeroallergen data from existing atmospheric monitoring networks.

Aerobiologia↗
USGS2017

The concurrent use of novel soil surface microclimate measurements to evaluate CO2 pulses in biocrusted interspaces in a cool desert ecosystem

Carbon cycling associated with biological soil crusts, which occupy interspaces between vascular plants in drylands globally, may be an important part of the coupled climate-carbon cycle of the Earth system. A major challenge to understanding CO 2 fluxes in these systems is that much of the biotic and biogeochemical activity occurs in the upper few mm of the soil surface layer (i.e., the ‘mantle of fertility’), which exhibits highly dynamic and difficult to measure temperature and moisture fluctuations. Here, we report a multi-sensor approach to simultaneously measuring temperature and moisture of this biocrust surface layer (0–2 mm), and the deeper soil profile, concurrent with automated measurement of surface soil CO 2 effluxes. Our results illuminate robust relationships between biocrust water content and field CO 2 pulses that have previously been difficult to detect and explain. All observed CO 2 pulses over the measurement period corresponded to surface wetting events, including when the wetting events did not penetrate into the soil below the biocrust layer (0–2 mm). The variability of temperature and moisture of the biocrust surface layer was much greater than even in the 0–5 cm layer of the soil beneath the biocrust, or deeper in the soil profile. We therefore suggest that coupling surface measurements of biocrust moisture and temperature to automated CO 2 flux measurements may greatly improve our understanding of the climatic sensitivity of carbon cycling in biocrusted interspaces in our study region, and that this method may be globally relevant and applicable.

Biogeochemistry↗
USGS2018

River network saturation concept: factors influencing the balance of biogeochemical supply and demand of river networks

River networks modify material transfer from land to ocean. Understanding the factors regulating this function for different gaseous, dissolved, and particulate constituents is critical to quantify the local and global effects of climate and land use change. We propose the River Network Saturation (RNS) concept as a generalization of how river network regulation of material fluxes declines with increasing flows due to imbalances between supply and demand at network scales. River networks have a tendency to become saturated (supply ≫ demand) under higher flow conditions because supplies increase faster than sink processes. However, the flow thresholds under which saturation occurs depends on a variety of factors, including the inherent process rate for a given constituent and the abundance of lentic waters such as lakes, ponds, reservoirs, and fluvial wetlands within the river network. As supply increases, saturation at network scales is initially limited by previously unmet demand in downstream aquatic ecosystems. The RNS concept describes a general tendency of river network function that can be used to compare the fate of different constituents among river networks. New approaches using nested in situ high-frequency sensors and spatially extensive synoptic techniques offer the potential to test the RNS concept in different settings. Better understanding of when and where river networks saturate for different constituents will allow for the extrapolation of aquatic function to broader spatial scales and therefore provide information on the influence of river function on continental element cycles and help identify policy priorities.

Biogeochemistry↗
USGS2017

Methodological considerations of terrestrial laser scanning for vegetation monitoring in the sagebrush steppe

Terrestrial laser scanning (TLS) provides fast collection of high-definition structural information, making it a valuable field instrument to many monitoring applications. A weakness of TLS collections, especially in vegetation, is the occurrence of unsampled regions in point clouds where the sensor’s line-of-sight is blocked by intervening material. This problem, referred to as occlusion, may be mitigated by scanning target areas from several positions, increasing the chance that any given area will fall within the scanner’s line-of-sight from at least one position. Because TLS collections are often employed in remote regions where the scope of sampling is limited by logistical factors such as time and battery power, it is important to design field protocols which maximize efficiency and support increased quantity and quality of the data collected. This study informs researchers and practitioners seeking to optimize TLS sampling methods for vegetation monitoring in dryland ecosystems through three analyses. First, we quantify the 2D extent of occluded regions based on the range from single scan positions. Second, we measure the efficacy of additional scan positions on the reduction of 2D occluded regions (area) using progressive configurations of scan positions in 1 ha plots. Third, we test the reproducibility of 3D sampling yielded by a 5-scan/ha sampling methodology using redundant sets of scans. Analyses were performed using measurements at analysis scales of 5 to 50 cm across the 1-ha plots, and we considered plots in grass and shrub-dominated communities separately. In grass-dominated plots, a center-scan configuration and 5 cm pixel size sampled at least 90% of the area up to 18 m away from the scanner. In shrub-dominated plots, sampling at least 90% of the area was only achieved within a distance of 12 m. We found that 3 and 5 scans/ha are needed to sample at least ~ 70% of the total area (1 ha) in the grass and shrub-dominated plots, respectively, using 5 cm pixels to measure sampling presence-absence. The reproducibility of 3D sampling provided by a 5 position scan layout across 1-ha plots was 50% (shrub) and 70% (grass) using a 5-cm voxel size, whereas at the 50-cm voxel scale, reproducibility of sampling was nearly 100% for all plot types. Future studies applying TLS in similar dryland environments for vegetation monitoring may use our results as a guide to efficiently achieve sampling coverage and reproducibility in datasets.

Idaho↗
USGS2020

Exploring the potential value of satellite remote sensing to monitor chlorophyll-a for U.S. lakes and reservoirs

Assessment of chlorophyll-a, an algal pigment, typically measured by field and laboratory in situ analyses, is used to estimate algal abundance and trophic status in lakes and reservoirs. In situ-based monitoring programs can be expensive, may not be spatially, and temporally comprehensive and results may not be available in the timeframe needed to make some management decisions, but can be more accurate, precise, and specific than remotely sensed measures. Satellite remotely sensed chlorophyll-a offers the potential for more geographically and temporally dense data collection to support estimates when used to augment or substitute for in situ measures. In this study, we compare available chlorophyll-a data from in situ and satellite imagery measures at the national scale and perform a cost analysis of these different monitoring approaches. The annual potential avoided costs associated with increasing the availability of remotely sensed chlorophyll-a values were estimated to range between $5.7 and $316 million depending upon the satellite program used and the timeframe considered. We also compared sociodemographic characteristics of the regions (both public and private lands) covered by both remote sensing and in situ data to check for any systematic differences across areas that have monitoring data. This analysis underscores the importance of continued support for both field-based in situ monitoring and satellite sensor programs that provide complementary information to water quality managers, given increased challenges associated with eutrophication, nuisance, and harmful algal bloom events.

Environmental Monitoring and Assessment↗
USGS2014

Uncertainty estimates in broadband seismometer sensitivities using microseisms

The midband sensitivity of a seismic instrument is one of the fundamental parameters used in published station metadata. Any errors in this value can compromise amplitude estimates in otherwise high-quality data. To estimate an upper bound in the uncertainty of the midband sensitivity for modern broadband instruments, we compare daily microseism (4- to 8-s period) amplitude ratios between the vertical components of colocated broadband sensors across the IRIS/USGS (network code IU) seismic network. We find that the mean of the 145,972 daily ratios used between 2002 and 2013 is 0.9895 with a standard deviation of 0.0231. This suggests that the ratio between instruments shows a small bias and considerable scatter. We also find that these ratios follow a standard normal distribution ( R 2 &thinsp;=&thinsp;0.95442), which suggests that the midband sensitivity of an instrument has an error of no greater than &plusmn;6 % with a 99 % confidence interval. This gives an upper bound on the precision to which we know the sensitivity of a fielded instrument.

Journal of Seismology↗