SEARCH · Search USGS

Results for “Coal Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

USGS2005

Geologic map of the Pinedale quadrangle, McKinley County, New Mexico

The 1:24,000-scale geologic map of the Pinedale 7.5' quadrangle lies in the western part of the Grants uranium mineral belt, which was mapped and studied under a cooperative agreement between the USGS and the U.S. Department of Energy. A spectacular panoramic view of the southern half of the Pinedale quadrangle is obtained looking northward from Interstate Highway 40, particularly from the New Mexico State travelers' rest stop near the Shell Oil Company's Ciniza Refinery, 28.5 kilometers (17.8 miles) east of Gallup. A west-trending escarpment, 200 meters high, of massive red sandstone, rises above a broad valley, its continuity broken only by a few deep and picturesque canyons in the western half of the quadrangle. The escarpment is formed by the eolian Entrada Sandstone of Late Jurassic age. The Entrada unconformably overlies the Chinle Formation of Late Triassic age, which occupies the valley below. The Chinle Formation consists of cherty mottled limestone and mudstone of the Owl Rock Member and underlying, poorly consolidated, red to purple fluvial siltstone, mudstone, and sandstone beds of the Petrified Forest Member. The pinyon- and juniper-covered bench that tops the escarpment is underlain by the Todilto Limestone. A quarry operation, located just north of the Indian community of Iyanbito in the southwestern part of the quadrangle, produces crushed limestone aggregate for highway construction and railroad ballast. Beyond the escarpment to the north and rising prominently above it, is the northwest-trending Fallen Timber Ridge. Near the west side of the quadrangle lie the peaks of Midget Mesa, and Mesa Butte, the latter of which has the highest altitude in the area at 2,635 meters (8,030 feet) above sea level. The prominences are capped by buff-colored resistant beds of the Dakota Sandstone of Late Cretaceous age, containing some interbedded coal. These beds unconformably overlie the uranium-bearing Morrison Formation, which consists of red, green, and gray shale, orange feldspathic sandstone, and green tuffaceous mudstone, deposited in ancient lakes, alluvial fans, and rivers during the Upper Jurassic Period. Thick, crossbedded, white beds of the Cow Springs Sandstone, derived from ancient windblown desert sands, underlie the Morrison. In the northern part of the quadrangle, the Dakota Sandstone is overlain by gray Mancos Shale and yellowish-gray Two Wells and Gallup Sandstones that were deposited in Late Cretaceous seas. Unconsolidated deposits of Quaternary age are found throughout the quadrangle in talus, slope wash, fans, valley alluviums, pediments, and as windblown sands in dunes and blanket deposits. The strata conform to the regional dip of about three degrees to north, except where they are down-folded some 200 meters along the Pinedale monocline, whose limbs follow a sinuous west-northwest trend across the northern half of the quadrangle. The monocline is beautifully exposed at Pinedale, where it shows as much as 20 degrees dip on the pine-studded bare rock slope of the Two Wells Sandstone. A north-plunging broad anticline and accompanying syncline is developed in the east-central part of the quadrangle but dies out against the monocline. A minor fault, with barely 3 meters of vertical displacement, extends several kilometers westward across the Todilto Limestone bench. A large landslide mass, 1.5 kilometers long by 0.7 kilometers wide occurs in the Mancos Shale west of Pinedale. Exploration drilling for uranium in the Morrison Formation has been extensive in the quadrangle, particularly north of the monocline, which adjoins the Old Church Rock mine area, west northwest of the quadrangle.

Miscellaneous Field Studies Map↗

USGS2004

Channel-morphology data for the Tongue River and selected tributaries, southeastern Montana, 2001-02

Coal-bed methane exploration and production have begun within the Tongue River watershed in southeastern Montana. The development of coal-bed methane requires production of large volumes of ground water, some of which may be discharged to streams, potentially increasing stream discharge and sediment load. Changes in stream discharge or sediment load may result in changes to channel morphology through changes in erosion and vegetation. These changes might be subtle and difficult to detect without baseline data that indicate stream-channel conditions before extensive coal-bed methane development began. In order to provide this baseline channel-morphology data, the U.S. Geological Survey, in cooperation with the Bureau of Land Management, collected channel-morphology data in 2001-02 to document baseline conditions for several reaches along the Tongue River and selected tributaries. This report presents channel-morphology data for five sites on the mainstem Tongue River and four sites on its tributaries. Bankfull, water-surface, and thalweg elevations, channel sections, and streambed-particle sizes were measured along reaches near streamflow-gaging stations. At each site, the channel was classified using methods described by Rosgen. For six sites, bankfull discharge was determined from the stage- discharge relation at the gage for the stage corresponding to the bankfull elevation. For three sites, the step-backwater computer model HEC-RAS was used to estimate bankfull discharge. Recurrence intervals for the bankfull discharge also were estimated for eight of the nine sites. Channel-morphology data for each site are presented in maps, tables, graphs, and photographs.

Open-File Report↗

USGS1985

Carboniferous paleogeographic, phytogeographic, and paleoclimatic reconstructions

Two revised paleogeographic reconstructions of the Visean and Westphalian C-D stages are presented based on recent paleomagnetic, phytogeographic, stratigraphic, and tectonic data. These data change the positions of some continental blocks, and allow the definition of several new ones. The most important modifications that have been incorporated in these reconstructions are: (1) a proposed isthmus linking North America and Siberia across the Bering Strait; and (2) the separation of China and Southeast Asia in six major blocks, including South China, North China, Shan Thai-Malaya, Indochina, Qangtang, and Tarim blocks. Evidence is presented that suggests that at least the South China, Shan Thai-Malaya, and Qangtang blocks were derived from the northern margin of Gondwana. Multivariate statistical analysis of phytogeographic data from the middle and late Paleozoic allow definition of a number of different phytogeographic units for four time intervals: (1) the Early Devonian, (2) Tournaisian—early Visean, (3) Visean, and (4) late Visean—early Namurian A. Pre-late Visean—early Namurian A floral assemblages from South China show affinities with northern Gondwana floras suggesting a southerly position and provides additional support for our reconstruction of South China against the northern margin of Gondwana. There is a marked decrease in the diversity of phytogeographic units in the Namurian and younger Carboniferous. This correlates closely with the time of assembly of most of Pangaea. The general pattern of Carboniferous phytogeographic units corresponds well with global distribution of continents shown on our paleogeographic reconstructions. In addition, we have constructed paleoclimatic maps for the two Carboniferous time intervals. These maps stress the distribution of rainfall, as this should be strongly correlated with the floras. There is marked change in the rainfall patterns between the Visean and Westphalian C-D. This change corresponds with the closing of the Appalachian-Ouachita ocean between Laurussia and Gondwana, and reflects the removal of a low-latitude moisture source that probably gave rise to monsoonal conditions along the northern margin of Gondwana in the Visean and earlier times. As well, the presence of a substantial heat source at high elevation in the Late Carboniferous significantly influenced the distribution of climatic belts.

International Journal of Coal Geology↗

USGS2024

Modeled coastal-ocean pathways of land-sourced contaminants in the aftermath of Hurricane Florence

Extreme precipitation during Hurricane Florence, which made landfall in North Carolina in September 2018, led to breaches of hog waste lagoons, coal ash pits, and wastewater facilities. In the weeks following the storm, freshwater discharge carried pollutants, sediment, organic matter, and debris to the coastal ocean, contributing to beach closures, algae blooms, hypoxia, and other ecosystem impacts. Here, the ocean pathways of land-sourced contaminants following Hurricane Florence are investigated using the Regional Ocean Modeling System (ROMS) with a river point source with fixed water properties from a hydrologic model (WRF-Hydro) of the Cape Fear River Basin, North Carolina's largest watershed. Patterns of contaminant transport in the coastal ocean are quantified with a finite duration tracer release based on observed flooding of agricultural and industrial facilities. A suite of synthetic events also was simulated to investigate the sensitivity of the river plume transport pathways to river discharge and wind direction. The simulated Hurricane Florence discharge event led to westward (downcoast) transport of contaminants in a coastal current, along with intermittent storage and release of material in an offshore (bulge) or eastward (upcoast) region near the river mouth, modulated by alternating upwelling and downwelling winds. The river plume patterns led to a delayed onset and long duration of contaminants affecting beaches 100 km to the west, days to weeks after the storm. Maps of the onset and duration of hypothetical water quality hazards for a range of weather conditions may provide guidance to managers on the timing of swimming/shellfishing advisories and water quality sampling.

Journal of Geophysical Research: Oceans↗

USGS1978

Remote-sensing methods for monitoring surface coal mining in the northern Great Plains

Recent studies at a large surface coal mine in southern Montana confirm that remote sensing is both feasible and effective for gathering land-use and environmental data (spatial, dynamic, and seasonal) for large-scale surface mines in the northern Great Plains. The Western Energy Co.'s Rosebud mine near Colstrip, Mont., was selected as a test site because it typifies surface operations in the Powder River Basin of Montana and Wyoming and elsewhere in the northern Great Plains. Several basic interpretive and analytical remote-sensing techniques were used to identify and delineate various categories of surface-mining operations and concurrent stages of reclamation that characterize most, if not all, such mining operations. Color infrared and black-and-white aerial photographs and a black-and-white band 5 Landsat image were used to identify (1) high wall and bench areas, (2) ungraded spoils, (3) graded and recontoured areas, (4) revegetated recontoured areas, (5) natural and impounded surface water, and (6) miscellaneous areas. Over the lifespan of an extensive surface mine, cultural and natural processes and cumulative environmental effects can be monitored by capitalizing on the close correlation between enhanced satellite imagery, infrared and (or) black-and-white aerial photography, standard large-scale topographic maps (such as U.S. Geological Survey 7½-minute quadrangle maps), and results of onsite inspection of mining and reclamation by Federal or State agencies.

Montana↗

USGS1981

Potentially favorable areas for large-yield wells in the Red River Formation and Madison Limestone in parts of Montana, North Dakota, South Dakota, Wyoming, and Nebraska

The need for large quantities of energy has created interest in the Fort Union coal region of the Northern Great Plains. Extensive development of this coal, which may include onsite steam-power generation, gasification, liquefaction, and slurry-pipeline transport of the coal from this region, would place a heavy demand on the region's limited streamflow. Paleozoic rocks that underlie the Fort Union coal region and aquifers in these rocks, including the Red River Formation and the Madison Limestone, might supply, at least on a temporary basis, a significant part of the water required for coal development. The area of study covers approximately 200,000 square miles, and includes eastern Montana, western North Dakota and South Dakota, northeastern Wyoming, and northwestern Nebraska. This report, one of a series in the Madison Limestone study, uses hydrologic and geologic data to outline potentially favorable areas for well construction - that is, areas in which there is a good probability that large-yield wells (more than 500 gallons per minute) can be completed in the Red River Formation and in the Madison Limestone. Potentially favorable areas in terms of aquifer characteristics, for both the Red River Formation and the Madison Limestone, are given a numerical evaluation from 1 to 3 based on the number of the following criteria that are met: (1) the presence of more than 100 feet of relatively porous rock, (2) the presence of more than 100 feet of dolomite, and (3) the presence of known geologic structures which could affect yield. Areas rated 3 are those in which all three criteria are satisfied; areas rated 2 are those in which two criteria are satisfied; and areas rated 1 are those in which only one criterion is satisfied. The criteria selected for this analysis were chosen because they can be recognized and mapped over the entire study area. Local features such as minor structures, solution zones, and rock facies of small extent were not included in this regional evaluation. In addition, water quality was considered in a general way in defining the favorable areas, by excluding areas in which the electrical resistivity of formation water, as calculated from geophysical well logs, was less than 1 ohm-meter. The numerical scales of the Red River Formation and Madison Limestone are summed to show potentially favorable areas for the combined aquifers. Certain additional factors which may be important to a prospective water user were not included in the numerical ranking - these include depths to the two aquifers, calcite saturation, water temperature, total dissolved solids, and piezometric head in relation to land surface. For a complete evaluation, potential users should consider these factors plus local structures, facies, and solution zones in conjunction with the numerical rankings reflecting aquifer characteristics. To facilitate consideration of piezometric head, maps are included in this report showing areas in which the piezometric head falls in certain ranges with respect to land surface.

Montana, Nebraska, North Dakota, South Dakota, Wyo↗

USGS2012

Data resources for the Wyoming Landscape Conservation Initiative (WLCI) Integrated Assessment (IA)

The data contained in this report were compiled, modified, and analyzed for the Wyoming Landscape Conservation Initiative (WLCI) Integrated Assessment (IA). The WLCI is a long-term science based effort to assess and enhance aquatic and terrestrial habitats at a landscape scale in southwest Wyoming while facilitating responsible energy development through local collaboration and partnerships. The IA is an integrated synthesis and analysis of WLCI resource values based on best available data and information collected from multiple agencies and organizations. It is a support tool for landscape-scale conservation planning and evaluation, and a data and analysis resource that can be used for addressing specific management questions. The IA analysis was conducted using a Geographic Information System in a raster (that is, a grid) environment using a cell size of 30 meters. To facilitate the interpretation of the data in a regional context, mean values were summarized and displayed at the subwatershed unit (WLCI subwatersheds were subset from the National Hydrography Dataset, Hydrologic Unit Code 12/Level 6). A dynamic mapping platform, accessed via the WLCI webpage at http://www.wlci.gov is used to display the mapped information, and to access underlying resource values that were combined to produce the final mapped results. The raster data used in the IA are provided here for use by interested parties to conduct additional analyses and can be accessed via the WLCI webpage. This series contains 74 spatial data sets: WLCI subwatersheds (vector) and 73 geotiffs (raster) that are segregated into the major categories of Multicriteria Index (including Resource Index and Condition), Change Agents, and Future Change. The Total Multicriteria Index is composed of the Aquatic Multicriteria Index and the Terrestrial Multicriteria Index. The Aquatic Multicriteria Index is composed of the Aquatic Resource Index and the Aquatic Condition. The Aquatic Resource Index is composed of the following components: Groundwater, Special Management Areas, and Priority Areas. The Aquatic Condition is composed of the following components: Focal Species, Species of Concern, Focal Ecosystems, and Proper Functioning Condition. The Terrestrial Multicriteria Index is composed of the Terrestrial Resource Index and the Terrestrial Condition. The Terrestrial Resource Index is composed of the following components: Special Management Areas, Agriculture, and Priority Areas. The Terrestrial Condition is composed of the following components: Focal Species, Big Game, Species of Concern, Rare Plants, and Focal Ecosystems. The Change Agents are composed the following components: Roads, Energy, Mines, and Urban. The Future Change is composed of the following components: Oil-Gas-Coal, Wind, Minerals, Climate-Temperature, Invasive Species, and Urban.

Wyoming↗

USGS1980

Geology and mineral resources of the North Absaroka Wilderness and vicinity, Park County, Wyoming, with sections on mineralization of the Sunlight mining region and geology and mineralization of the Cooke City mining district, and a section on aeromagnetic interpretation

SUMMARY The North Absaroka Wilderness is approximately 560 square miles (1,450 km 2 ) of rugged scenic mountainous terrain that adjoins the eastern boundary of Yellowstone National Park in northwestern Wyoming. The area was studied during 1970, 1971, and 1972 by personnel of the U. S. Geological Survey and the U. S. Bureau of Mines to evaluate its mineral-resource potential as required by the Wilderness Act of 1964. This evaluation is based on a search of the literature courthouse and production records, geologic field mapping, field inspection of claims and prospects, analyses of bedrock and stream-sediment samples, and an aeromagnetic survey. The North Absaroka Wilderness is underlain almost entirely by andesitic and basaltic volcanic rocks of Eocene age. These volcanics rest on deformed sedimentary rocks of Paleozoic and, locally, of Mesozoic age that are exposed at places along the northern and eastern edges of the wilderness. Dikes and other igneous intrusive bodies cut both the volcanic and sedimentary rocks. A nearly flat detachment fault, the Heart Mountain fault, and a related steep break-away fault have displaced middle and upper Paleozoic rocks and some of the older part of the volcanic sequence to the southeast. A much greater thickness of volcanic rocks was found to be involved in Heart Mountain faulting than had previously been recognized; however, most of the volcanic rocks and many of the intrusives were emplaced after Heart Mountain faulting. Local folding and high-angle faulting in mid-Eocene time have deformed all but the youngest part of the volcanic sequence in the southeastern part of the wilderness. This deformation is interpreted as the last pulse of Laramide orogeny. The results of this study indicate that the mineral-resource potential of the wilderness is minimal. Bentonite, petroleum, low-quality coal, and localized deposits of uranium and chromite have been produced in the surrounding region from rocks that underlie the volcanic rocks; but such deposits, if present in the wilderness, would be too deeply buried, too small, or too sporadically distributed to be profitably located and exploited. Copper and gold mines and prospects are present on the fringes of the wilderness, but otherwise the area seems to be devoid of economically valuable concentrations of metallic minerals. No surface evidence of geothermal-energy potential was found. Known mineral deposits in the vicinity of the North Absaroka Wilderness are associated with intrusive rocks. From the Cooke City mining district, just north of the wilderness, replacement deposits in Upper Cambrian carbonate rocks may extend a short distance into the north edge of the wilderness, In the Sunlight mining region, an enclave nearly surrounded by the wilderness, mineralization occurs in veins and is disseminated in volcanic and plutonic rocks. Richer concentrations of metallic minerals may occur in carbonate rocks adjacent to intrusive bodies at depth beneath the volcanic rocks in the Sunlight region. A few small intrusive bodies occur in the wilderness, but no significant associated mineralization was detected. Aeromagnetic data indicate that other intrusives not exposed by erosion may occur in the wilderness; however, no significant metamorphism or alteration is evident at the surface to indicate their presence. Although most of the rocks of the wilderness are of igneous origin, they are all so old (Eocene) that it is unlikely that they retain any original heat. The Pleistocene rhyolitic ash-flow tuffs in the southwestern part of the wilderness were erupted from sources in Yellowstone National Park just to the west; however, in the wilderness these tuffs are too thin to contain any residual heat.

Wyoming↗

USGS2020

Understanding and documenting the scientific basis of selenium ecological protection in support of site-specific guidelines development for Lake Koocanusa, Montana, U.S.A., and British Columbia, Canada

Modeling of ecosystems is a part of the U.S. Environmental Protection Agency’s protocol for developing site-specific selenium guidelines for protection of aquatic life. Selenium as an environmental contaminant is known to bioaccumulate and cause reproductive effects in fish and wildlife. Here we apply a modeling methodology—ecosystem-scale selenium modeling—to understand and document the scientific basis for predicting and validating ecological protection for Lake Koocanusa, a transboundary reservoir between Montana and British Columbia. A comprehensive set of site-specific data compiled from public databases (Federal, State, and Provincial) and reports by Teck Coal Ltd., is available in a companion U.S. Geological Survey data release. The tissue guideline used within modeling here to assess protection is the U.S. Environmental Protection Agency’s national selenium guideline for whole-body fish (dry weight); however, other numeric values for a whole-body guideline or other tissue types may be assumed if applicable tissue-to-tissue conversion factors are available. We consider the report assembled here as a working document that presents a model that can effectively address and structure the needs of (1) scientific understanding in representing the lake’s ecosystem and selenium biodynamics and (2) policy and management development during a decision-making process, but it is open to modification and updating as more ecologically detailed data become available. The approach brings together the main concerns involved in selenium toxicity: likelihood of high exposure, inherent species sensitivity, and close connectivity of ecosystem characteristics and behavioral ecology of predators. Detailed site-specific modeling equations are provided to document the linked factors that determine the responses of ecosystems to selenium. A series of scenarios quantifies the implications of choices of site-specific variables including food-web species, bioavailability of particulate material, and partitioning between the dissolved and particulate phases at the base of food webs. A gradient mapping tool applied to Lake Koocanusa provides a precedent for ecosystem-scale modeling of lakes by recognizing the importance of lake strata and hydrodynamics as components of modeling. Data requirements for ecosystem modeling, including ecological and hydrological process information fundamental to the dietary biodynamics of selenium in site-specific food webs, were assessed as a precursor to model validation for Lake Koocanusa. Understanding these relationships is necessary to connect modeling outcomes to reproductive effects and establish boundaries, in the case of Lake Koocanusa, for the influences of dam operation, fish-community viability, and its Clean Water Act impaired 303(d)-listing status on ecosystem function. We find that an assemblage of conditions affects the representation of Lake Koocanusa’s ecosystem within modeling scenarios but that the constructed gradient maps, mechanistic model, and associated bioaccumulation potentials portray and quantify the variables that are determinative to protection of predator species. Ecological and hydrological sorting of compiled individual data points on a site- and species-specific basis helps identify and address model uncertainties. Sources of uncertainty include (1) the scarcity of data for some environmental media compartments across time and locations, (2) the complexity of hydrodynamic conditions that can lead to seasonal ecological disconnects such as in selenium partitioning from water into particulates, and (3) the functional status of Lake Koocanusa’s ecosystem because of cumulative effects of various environmental stresses (for example, fish-community changes, flow regime changes, parasites, gonadal dysfunction, and increasing mining input-selenium concentrations since 1984). To this last point, it is important to determine where Lake Koocanusa is in an impairment-restoration cycle so as not to base protection on survivor bias, the maintenance of a currently degraded ecosystem, or normalized toxicity. In a broader context, one of the overall consequences of revised selenium regulations is that their derivation is now dependent on being able to define and understand the status of the ecosystem on which protection is based.

Montana, British Columbia↗

USGS2002

Influence of rock composition on the geochemistry of stream and spring waters from mountainous watersheds in the Gunnison, Uncompahgre, and Grand Mesa National Forests, Colorado

The ranges of geochemical baselines for stream and spring waters were determined and maps were constructed showing acid-neutralizing capacity and potential release of total dissolved solids for streams and spring waters for watersheds underlain by each of ten different rock composition types in the Gunnison, Uncompahgre, and Grand Mesa National Forests, Colorado (GMUG). Water samples were collected in mountainous headwater watersheds that have comparatively high precipitation and low evapotranspiration rates and that generally lack extensive ground-water reservoirs. Mountainous headwaters react quickly to changes in input of water from rain and melting snow and they are vulnerable to anthropogenic impact. Processes responsible for the control and mobility of elements in the watersheds were investigated. The geochemistry of water from the sampled watersheds in the GMUG, which are underlain by rocks that are relatively unmineralized, is compared to the geochemistry of water from the mineralized Redcloud Peak area. The water with the highest potential for release of total dissolved solids is from watersheds that are underlain by Paleozoic sedimentary rocks; that high potential is caused primarily by gypsum in those rocks. Water that has the highest acid-neutralizing capacity is from watersheds that are underlain by Paleozoic sedimentary rocks. The water from watersheds underlain by the Mancos Shale has the next highest acid-neutralizing capacity. Water that has the lowest acid-neutralizing capacity is from watersheds that are underlain by Tertiary ash-flow tuff. Tertiary sedimentary rocks containing oil shale, the Mesavede Formation containing coal, and the Mancos Shale all contain pyrite with elevated metal contents. In these mountainous head-water areas, water from watersheds underlain by these rock types is only slightly impacted by oxidation of pyrite, and over-all it is of good chemical quality. These geochemical baselines demonstrate the importance of rock composition in determining the types of waters that are in the headwater areas. The comparison of these geochemical baselines to later geochemical base-lines will allow recognition of any significant changes in water quality that may occur in the future.

Colorado↗

USGS1956

Selected annotated bibliography of the geology of uraniferous and radioactive native bituminous substances, exclusive of coals, in the United States

Native bituminous substances are divided into two groups, 1) bitumens and, 2) pyrobitumens. Bitumens are composed principally of hydrocarbons substantially free from oxygenated bodies, are fusible, and are soluble in carbon disulfide. Native bitumens occur in liquid and solid forms. The native liquid bitumens include all petroleums or crude oils. Native solid bitumens include native waxes such as ozocerite, asphalts or petroleum tars, and asphaltites such as gilsonite and grahamite. Pyrobitumens are composed principally of hydrocarbons which may contain oxygenated bodies. They are infusible and are insoluble, or nearly insoluble, in carbon disulfide. Native pyrobitumens are divided into an oxygen-containing group including peats, lignites, and coals, and an essentially oxygen-free, asphaltic group including such substances as wurtzilite, albertite, impsonite, and ingramite. Thucholites, which are carbonaceous substances that may contain uranium, thorium, and rare earths, commonly are considered to be pyrobitumens. Their compositions are variable and may fall into either the oxygen-containing or oxygen-free group. All varieties of native bituminous substances may be associated with mineral matter. The nomenclature of bitumens and pyrobitumens is used very loosely in the literature. This circumstance arises from the difficulty in recognizing many of these substances by visual examination, and because many of them can be identified accurately only by chemical methods. Inasmuch as some of the chemical procedures are time-consuming and satisfactory analytical methods have not been devised for all these substances, geologists generally have not obtained precise identifications but rather have used names that appeared most appropriate to the circumstances. It is expected that future research will show many substances called "asphaltite," "thucholite," etc., to be incorrectly identified. The nomenclature used by the authors of the various references of this bibliography is followed without deviation or further discussion. The stratigraphic nomenclature also is that used by the authors. In this bibliography emphasis is placed on reports dealing with the uranium contents and radioactivity of native bituminous substances rather than on mineralogical and chemical studies of these substances. The distribution of the substances described in the references is shown on the accompanying map. The indicated presence of these substances does not infer that they contain sufficient radioactive elements to constitute ores.

Trace Elements Investigations↗

USGS2019

Understanding organic matter heterogeneity and maturation rate by Raman spectroscopy

Solid organic matter (OM) in sedimentary rocks produces petroleum and solid bitumen when it undergoes thermal maturation. The solid OM is a ‘geomacromolecule’, usually representing a mixture of various organisms with distinct biogenic origins, and can have high heterogeneity in composition. Programmed pyrolysis is a common method to reveal bulk geochemical characteristics of the dominant OM, while detailed organic petrography is required to reveal information about the biogenic origin of contributing macerals. Despite the advantages of programmed pyrolysis, it cannot provide information about the heterogeneity of chemical compositions present in the individual OM types. Therefore, other analytical techniques such as Raman spectroscopy are necessary. In this study, we compared geochemical characteristics and Raman spectra of two sets of naturally and artificially matured Bakken source rock samples. A continuous Raman spectral map on solid bitumen particles was created from the artificially matured hydrous pyrolysis residues, in particular, to show the systematic chemical modifications in microscale. Spectroscopic data was plotted for both sets against thermal maturity to compare maturation rate/path for these two separate groups. The outcome showed that artificial maturation through hydrous pyrolysis does not follow the same trend as naturally-matured samples although having similar solid bitumen reflectance values (%SBRo). Furthermore, Raman spectroscopy of solid bitumen from artificially matured samples indicated the heterogeneity of OM decreases as maturity increases. This may represent an alteration in chemical structure towards more uniform compounds at higher maturity. This study may emphasize the necessity of using analytical methods such as Raman spectroscopy along with conventional geochemical methods to better reveal the underlying chemical structure of OM. Finally, observation by Raman spectroscopy of chemical alteration of OM during artificial maturation may assist in the proposal of improved pyrolysis protocols to better resemble natural geologic processes.

North Dakota↗

USGS1994

Principal reference section for part of the Eocene Ghazij Formation, Moghal Mine area, Mach coal field, Balochistan, Pakistan

The information presented on this sheet was collected as part of a joint U.S. Geological Survey-Geological Survey of Pakistan program sponsored by the U.S. Agency for International Development. As a project within this program, the coal-bearing Ghazij Formation (Eocene) was investigated in the northeastern part of Balochistan cast and south of the provincial capital of Quetta. Strata exposed in this area range in age from Permian to Holocene and crop out as a belt of folded and thrusted rocks that form a southeast-facing orocline. In this region of Pakistan, the Ghazij can usually be divided into three parts. The lower part is the thickest (probably more than 1,000 m) and consists of gray-weathering calcareous mudrock (shale, mudstone, and impure claystone) and a few tabular bodies of fine-to medium-grained calcareous sandstone. The middle part (27-300 m) consists of gray-weathering calcareous mudrock and tabular to lenticular bodies of fine-to medium-grained calcareous sandstone; beds of carbonaceous shale and coal are common. The upper part (as thick as 533 m) contains reddish-weathering calcareous mudrock that contains scattered lenticular bodies of fine- to medium-grained calcareous sandstone. Fossil plant debris is common in mudrock of the lower and middle parts of the Ghazij, and bivalves and gastropods are common in the middle part; the upper part of the Ghazij is usually unfossiliferous. This three-fold division of the Ghazij is less distinct in the Johan area. Here, the upper part of the formation is clearly identifiable, but rocks below it are poorly exposed and assigning a stratigraphic level that separates the middle and lower parts of the formation is problematic. Below the upper part of the formation is a thick sequence of greenish-gray calcareous mudrock that contains locally abundant plant debris and isolated bodies of brown-weathering sandstone. Rare carbonaceous shale and even rarer coal are present in the upper part of this sequence, and this interval of the formation might correspond to the middle part of the Ghazji exposed in areas to the north. We propose that, in the Johan area, those rocks below the upper part of the formation be referred to as the main body of the Ghazij (for example, main-body Ghazij). Underlying the Ghazij are the carbonate rocks of the Paleocene Dungan Formation (or its equivalent), and overlying the Ghazij are the mostly carbonate rocks of the Eocene Kirthar Formation (or its equivalent). Both contacts can be conformable or unconformable. All of the pre-Neogene rocks in Balochistan are greatly deformed by the collision of India and Asia. The Ghazij is especially susceptible to regional compressional tectonics because it contains a large amount of shale and is sandwiched between two thick carbonate units. As a result, bedding-plane faults and isoclinal folds are common. As part of our study of the Ghazij Formation, five stratigraphic sections were measured: one near Pir Ismail Ziarat, one in the Sor Range, two in the vicinity of Mach, and one near Johan. Each area's section is published separately.

Balochistan↗

USGS1994

Principal reference section for part of the Eocene Ghazij Formation, Sarawan River area, Johan coal field, Balochistan, Pakistan

Balochistan↗

USGS2022

Pore systems and organic petrology of cretaceous Mowry and Niobrara source-rock reservoirs, Powder River Basin, Wyoming, USA

The Powder River Basin (PRB) is a world-class oil province, in large part thanks to contributions from premier source rocks, Cretaceous Mowry and Niobrara shales. Both formations are also unconventional reservoirs. A critical aspect of evaluating production potential and finding sweet spots is the nature of the pore systems in these fine-grained source-rock reservoirs. Variation by stratigraphic interval is important for selecting optimum target zones for horizontal wells. Understanding variation in pore type, size, and connectivity and relationships with mineralogy and fabric help in determining prospectivity in different parts of the basin. Deciphering controls on pore-system development helps predict intervals and locations of optimum reservoir quality. Imaging of Niobrara and Mowry samples from a range of thermal maturities provided observations and data on pore systems, organic matter (OM) types and associations with mineralogy and fabric, wettability, and microporosity associated with both diagenetic and detrital clays. Imaging techniques included scanning electron microscopy, organic petrography and correlative scanning electron microscopy, and mapping of mineralogy through energy dispersive spectroscopy. Mean solid bitumen (BR o ) and vitrinite reflectance (VR o ) values indicate all samples are in the oil window with values ranging from 0.52 to 1.15%. Organic fluorescence is prominent in amorphous OM, solid bitumen and some vitrinite in the early oil window. The fluorescence is extinguished at higher thermal maturity. Carbonate pellets (in Niobrara) mainly contain migrated solid bitumen and residual live oil and little or no terrigenous OM (vitrinite and inertinite). However, terrigenous OM is common in siliceous/argillaceous laminae in both formations, where it occurs with amorphous OM, some of which has converted in situ to a solid bitumen petroleum residue. One key finding is the widespread presence of migrated OM at very early oil window maturity. Distribution of such OM and associated wettability alteration is fabric-controlled, at all levels of thermal maturity studied. Clay morphology and abundance and supporting rigid mineral grain framework strongly influence pore development, preservation, and connectivity in both formations. Carbonate content is a good proxy for reservoir quality in Niobrara intervals due to association of porous solid bitumen with calcareous fecal pellets. High recrystallized microquartz content is associated with the best reservoir intervals in the Mowry.

Wyoming↗

USGS2011

Hydrogeology and simulation of groundwater flow in the Arbuckle-Simpson aquifer, south-central Oklahoma

The Arbuckle-Simpson aquifer in south-central Oklahoma provides water for public supply, farms, mining, wildlife conservation, recreation, and the scenic beauty of springs, streams, and waterfalls. Proposed development of water supplies from the aquifer led to concerns that large-scale withdrawals of water would cause decreased flow in rivers and springs, which in turn could result in the loss of water supplies, recreational opportunities, and aquatic habitat. The Oklahoma Water Resources Board, in collaboration with the Bureau of Reclamation, the U.S. Geological Survey, Oklahoma State University, and the University of Oklahoma, studied the aquifer to provide the Oklahoma Water Resources Board the scientific information needed to determine the volume of water that could be withdrawn while protecting springs and streams. The U.S. Geological Survey, in coopertion with the Oklahoma Water Resources Board, did a study to describe the hydrogeology and simulation of groundwater flow of the aquifer. The outcrop of the Arbuckle-Simpson aquifer covers an area of about 520 square miles in Carter, Coal, Johnston, Murray, and Pontotoc Counties. Three subdivisions of the aquifer outcrop were designated for this study: the eastern, central, and western Arbuckle-Simpson aquifer. This study emphasized the eastern Arbuckle-Simpson aquifer because it is the largest part of the aquifer by area and volume; most groundwater withdrawals are from the eastern Arbuckle-Simpson aquifer; and the largest (by flow) streams and springs sourced from the aquifer are on the eastern Arbuckle-Simpson aquifer. The aquifer lies in an uplifted area commonly referred to as the Arbuckle Mountains, which is characterized by great thicknesses of mostly carbonate rocks, uplifts, folded structures, and large fault displacements. The Arbuckle-Simpson aquifer is contained in three major rock units of Late Cambrian to Middle Ordovician age: the Timbered Hills, Arbuckle, and Simpson Groups. The aquifer is underlain by low-permeability Cambrian and Proterozoic igneous and metamorphic rocks, and is confined above by younger sedimentary rocks of various ages in areas where the top of the aquifer dips below the surface. The major part of the Arbuckle-Simpson aquifer is the Arbuckle Group, which consists of as much as 6,700 feet of limestone in the western Arbuckle-Simpson aquifer, but which thins to an estimated 3,000 feet of predominantly dolostone in the eastern Arbuckle-Simpson aquifer. Water is obtained from cavities, solution channels, fractures, and intercrystalline porosity in the limestone and dolostone. The overlying Simpson Group, consisting of sandstones, shales, and limestones, is as much as 2,300 feet thick in the western Arbuckle-Simpson aquifer, but generally is less than 1,000 feet thick in the eastern aquifer. Water in the Simpson Group is stored primarily in pore spaces between the sand grains in the sandstones. A digital, three-dimensional geologic framework model was constructed to define the geometric relations of fault blocks and subsurface rock units across complex fault zones of the eastern Arbuckle-Simpson aquifer. Geologic data for the model were obtained from 126 drill holes; stratigraphic contacts and faults defined from a digitized version of the surface geologic map; and fault geometry, stratigraphic thickness, and information compiled from geologic and hydrogeologic reports and maps. Groundwater in the aquifer moves from areas of high head (altitude) to areas of low head along streams and springs. The potentiometric surface in the eastern Arbuckle-Simpson aquifer generally slopes from a topographic high from northwest to the southeast, indicating that regional groundwater flow is predominantly toward the southeast. Freshwater is known to extend beyond the aquifer outcrop near the City of Sulphur, Oklahoma, and Chickasaw National Recreation Area, where groundwater flows west from the outcrop of the eastern Arbuckle-Simpson aquifer and becomes confin

Scientific Investigations Report↗

USGS1994

Principal reference section for part of the Eocene Ghazij Formation, Gishtari Nala area, Mach coal field, Balochistan, Pakistan

The information presented on this sheet was collected as part of a joint U.S. Geological Survey-Geological Survey of Pakistan program sponsored by the U.S. Agency for International Development. As a project within this program, the coal-bearing Ghazij Formation (Eocene) was investigated in the northeastern part of Balochistan east and south of the provincial capital of Quetta. Strata exposed in this area range in age from Permian to Holocene and crop out as a belt of folded and thrusted rocks that form a southeast-facing orocline. In this region of Pakistan, the Ghazij can usually be divided into three parts. The lower part is the thickest (probably more than 1,000 m) and consists of gray-weathering calcareous mudrock (shale, mudstone, and impure claystone) and a few tabular bodies of fine-to medium-grained calcareous sandstone. The middle part (27-300 m) consists of gray-weathering calcareous mudrock and tabular to lenticular bodies of fine- to medium-grained calcareous sandstone; beds of carbonaceous shale and coal are common (in the Mach area, the middle part of the formation also contains numerous individual beds of muddy limestone). The upper part (as thick as 533 m) contains reddish-weathering calcareous mudrock that contains scattered lenticular bodies of fine-to medium-grained calcareous sandstone. Fossil plant debris is common in mudrock of the lower and middle parts of the Ghazij and bivalves and gastropods are common in the middle part of the formation; the upper part of the Ghazij is usually unfossiliferous. Underlying the Ghazij are the carbonate rocks of the Paleocene Dungan Formation (or its equivalent), and overlying the Ghazij are the mostly carbonate rocks of the Eocene Kirthar Formation (or its equivalent). Both contacts can be conformable or unconformable. All of the pre-Neogene rocks in Balochistan are greatly deformed by the collision of India and Asia. The Ghazij is especially susceptible to regional compressional tectonics because it contains large amounts of shale and is sandwiched between two thick carbonate units. As a result, bedding-plane faults and isoclinal folds are very common. As part of our study of the Ghazij Formation, five stratigraphic sections were measured: one near Pir Ismail Ziarat, one in the Sor Range, two in the vicinity of Mach, and one near Johan. Each area's section is published separately.

Balochistan↗

USGS2020

A two-stage step-wise framework for fast optimization of well placement in coalbed methane reservoirs

Coalbed methane (CBM) has emerged as a clean energy resource in the global energy mix, especially in countries such as Australia, China, India and the USA. The economical and successful development of CBM requires a thorough evaluation and optimization of well placement prior to field-scale exploitation. This paper presents a two-stage, step-wise optimization framework to obtain the optimal placement of wells for large-scale development of CBM reservoirs. In the first stage, an optimal uniform well pattern is obtained by optimizing well pattern description parameters with the particle swarm optimization (PSO) algorithm. Subsequently, the location and status (active/inactive) of each well are perturbed and optimized within the patterns through the integration of the generalized pattern search (GPS) algorithm and a quality map (QM) representing the production potential. This framework was tested in a synthetic anthracite CBM reservoir in the Qinshui basin (with high gas content and low permeability) and a real field high volatile bituminous reservoir in the Illinois basin (with low gas content and high permeability). The results show that: (i) significant variations in the net present value (NPV) exist with respect to different uniform well patterns (even for cases where the total number of wells are identical), the optima of which can be efficiently determined by the PSO within 100 numerical simulation runs; (ii) the optimization of well perturbations by the GPS results in a more noticeable improvement in NPVs for the synthetic (12.3%) than for the real field model (4.6%); (iii) for the low permeable synthetic model with narrow optimal well spacings (320 m × 200 m), the contribution of the optimization of well perturbation to the NPV increment is heavily dependent on the uniform well placement solution; (iv) for the high permeable real field model with large optimal well spacings (1300 m × 1300 m), the initial uniform well placement has a very minor effect on the subsequent well perturbation solutions in terms of NPV; (v) the proposed framework significantly outperforms the conventional well-by-well concatenation procedure in terms of computational efficiency, robustness and optimal criteria set for production potential.

International Journal of Coal Geology↗