Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Resource Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources
USGS1994

Estimates of monthly streamflow characteristics and dominant-discharge hydrographs for selected sites in the lower Missouri and Little Missouri River basins in Montana

Various streamflow characteristics were estimated for water-reservation purposes for 17 sites in the lower Missouri River Basin and four sites in the Little Missouri River Basin in Montana. The characteristics were mean monthly and annual streamflow and monthly mean streamflow that is exceeded 90, 80, 50, and 20 percent of the time. In addition, dominant-discharge hydrographs were estimated for 10 of the 17 sites in the lower Missouri River Basin and for four sites in the Little Missouri River Basin. Dominant discharge was considered to be equal to the peak discharge having a recurrence interval of two years. Monthly streamflow characteristics generally were based on a common 1937-86 base period. A mixed-station record-extension program was used to estimate missing flow data for streamflow-gaging stations. Two methods were used to estimate characteristics at ungaged sites. One method was based on corre- lating discharge measurements at the estimating site with concurrent discharges at a nearby gaged site. The second method was based on using a drainage-area ratio to transfer characteristics at a gaged site to the estimating site. Dominant discharges for gaged sites were obtained from a previous flood-frequency report or by fitting a log-Pearson Type 3 probability distribution to recorded peak-flow data. A drainage-area-ratio adjustment was used to transfer dominant dis- charges from gaged sites to ungaged sites. Dominant-discharge hydrographs were determined from visual examination of recorded hydrographs having maximum daily discharges that were relatively close to the estimated dominant discharges.

Water-Resources Investigations Report↗
USGS1982

Hydrology of the Beryl-Enterprise area, Escalante Desert, Utah, with emphasis on ground water; With a section on surface water

An investigation of the water resources of the Beryl-Enterprise area, Escalante Desert, Utah (pl. 1), was made during 1976-78 as part of a cooperative program with the Utah Department of Natural Resources, Division of Water Rights. Wells were the most important source of water for all purposes in the Beryl-Enterprise area during 1978, but it has not always been so. For nearly a century after the first settlers arrived in about 1860, streams supplied most of the irrigation water and springs supplied much of the water for domestic and stock use. A few shallow wells were dug by the early settlers for domestic and stock water, but the widespread use of ground water did not start until the 1920's when shallow wells were first dug to supply irrigation water. Ground-water withdrawals from wells, principally for irrigation, have increased nearly every year since the 1920's. The quantity withdrawn from wells surpassed that diverted from surface sources during the mid-1940's and was about eight times that amount during the 1970's. As a result, water levels have declined measurably throughout the area resulting in administrative water-rights problems. The primary purpose of this report is to describe the water resources with emphasis on ground water. The surface-water resources are evaluated only as they pertain to the understanding of the ground-water resources. A secondary purpose is to discuss the extent and effects of the development of ground water in order to provide the hydrologic information needed for the orderly and optimum development of the resource and for the effective administration and adjudication of water rights in the area. The hydrologic data on which this report is based are given in a companion report by Mower (1981).

Utah↗
USGS2001

System and boundary conceptualization in ground-water flow simulation

Ground-water models attempt to represent an actual ground-water system with a mathematical counterpart. The conceptualization of how and where water originates in the ground-water-flow system and how and where it leaves the system is critical to the development of an accurate model. The mathematical representation of these boundaries in the model is important because many hydrologic boundary conditions can be mathematically represented in more than one way. The determination of which mathematical representation of a boundary condition is best usually is dependent upon the objectives of the study. This report focuses on the specific aspect of describing different ways to simulate, in a numerical model, the physical features that act as hydrologic boundaries in an actual ground-water system. The ramifications, benefits, and limitations of each approach are enumerated, and descriptions of the representation of boundaries in models for Long Island, New York, and the Middle Rio Grande Basin, New Mexico, illustrate the application of some of the methods.

Techniques of Water-Resources Investigations↗
USGS1969

Hydrologic reconnaissance of Curlew Valley, Utah and Idaho

This report is the fifth in a series of reports prepared by the U. S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Rights, that describe the water resources of selected basins in western Utah. Previously published reports in this series are listed on page 35 and the areas covered by them are shown in figure 1. The purpose of this report is to present available hydrologic data on the Utah part of Curlew Valley, to provide an evaluation of the potential water-resource development of the valley, and to identify needed studies that would help provide an understanding of the valley's water supply.

Idaho, Utah↗
USGS1977

Geochemical and hydrologic data for wells and springs in thermal-spring areas of the Appalachians

Current interest in geothermal potential of thermal-spring areas in the Appalachians enhances the value of data on thermal springs and wells in these areas. This report presents maps showing locations of selected springs and wells and tables of physical and chemical data pertaining to these wells and springs. The chemical tables show compositions of gases (oxygen, nitrogen, argon, methane, carbon dioxide, and helium), isotope contents (tritium, carbon-13, and oxygen-18), trace and minor element chemical data, and concentrations of the major chemical constituents.

Water-Resources Investigations Report↗
USGS1986

Recharge zone of the Edwards aquifer hydrologically associated with Barton springs in the Austin area, Texas

The Edwards aquifer extends in a narrow belt from Bell County in the northeast to Kinney County in the southwest (index map) and provides water for at least nine counties in south-central Texas. Hydrologic boundaries divide the Edwards aquifer in the Austin area for which Barton Springs is the major discharge point. This part of the Edwards aquifer provides the municipal, industrial, domestic, and agricultural water supplies for about 30,000 people in the Austin area (southern Travis and northern Hays counties). Discharge from Barton Springs sustains streamflow at the mouth of Barton Creek and flows into Town Lake. Much of the land use within the outcrop area of the Edwards aquifer near Austin is rapidly changing from natural woodland and grassland to commercial and residential developments. Because urban development can result in a substantial degradation of the quality of water that recharges the aquifer, the extent of the recharge zone of the Edwards aquifer was delineated to provide information to the City of Austin for their use in formulating a plan for protecting and managing groundwater quality. The purpose of this report is to define and delineate the areal extent of the recharge zone of the Edwards aquifer in southern Travis and northern Hays Counties. The areal boundary of the recharge zone was determined by: (1) geologic mapping of the aquifer area; (2) interpretation of aerial photographs; (3) field verification of existing geologic maps; and (4) streamflow-loss studies.

Water-Resources Investigations Report↗
USGS1978

Water resources inventory of Connecticut Part 8: Quinnipiac River basin

The Quinnipiac River basin area in southcentral Connecticut covers 363 square miles, and includes all drainage basins that enter Long Island Sound from the Branford to the Wepawaug Rivers. Its population in 1970 was estimated at 535,000. Precipitation averages 47 inches per year and provides an abundant supply of water. Twenty-one inches returns to the atmosphere as evapotranspiration; the remainder flows directly to streams or percolates to the water table and discharges to Long Island Sound. Small amounts of water are exported from the basin by the New Britain Water Department, and small amounts are imported to the basin by the New Haven Water Company. The amount of water that can be developed at a given place depends upon precipitation, variability of streamflow, hydraulic properties and areal extent of the aquifers, and hydraulic connection between the aquifers and major streams. The quality of the water is determined by the physical environment and the effects of man. Stratified drift is the only aquifer capable of large sustained yields of water to individual wells. Yields of 64 screened wells tapping stratified drift range from 17 to 2,000 gpm (gallons per minute); their median yield is 500 gpm. Till is widespread and generally provides only small amounts of water. Wells in till normally yield only a few hundred gallons of water daily and commonly are inadequate during dry periods. Till is generally used only as an emergency or secondary source of water. Bedrock aquifers underlie the entire report area and include sedimentary, igneous, and metamorphic rock types. These aquifers supply small but reliable quantities of water to wells throughout the basin and are the chief source for many nonurban homes and farms. About 90 percent of the wells tapping bedrock yield at least 2 pgm, and much larger yields are occasionally reported. Maximum well yields of 305 gpm for sedimentary, 75 gpm for igneous, and 200 gpm for metamorphic bedrock have been reported. Water potentially available from stratified drift was estimated on the basis of hydraulic characteristics of the aquifers and evaluation of natural and induced recharge. Long-term yields estimated for 14 favorable areas of stratified drift range from 0.8 to 16.1 mgd (million gallons per day), but detailed verification studies are needed before development. The natural quality of water in the report area is good. The water is generally low in dissolved solid and is soft to moderately hard. Surface water is less mineralized than ground water, especially during high flow when it is primarily surface runoff. A median dissolved-solids concentration of 117 mg/l (milligrams per liter) and a median hardness of 58 mg/l was determined for water samples collected at 20 sites on 16 streams during high flow. A median dissolved-solids concentration of 146 mg/l and a median hardness of 82 mg/l was determined for samples collected at the same sites during low flow. In contrast water from 130 wells had a median dissolved-solids concentration of 188 mg/l and a median hardness of 110 mg/l. Iron and manganese occur in objectionable concentrations in parts of the report area, particularly in water from streams draining swamps and in water from aquifers rich in iron- and manganese-bearing minerals. Concentrations of iron in excess of 0.3 mg/l were found in 40 percent of the high-streamflow samples, 59 percent of the low-streamflow samples and 20 percent of the ground-water samples. Human activities have modified the quality of water in much of the basin. Wide and erratic fluctuations in concentration of dissolved solids in streams, high bacterial content of the Quinnipiac River, and locally high nitrate and chloride concentrations in ground water are evidence of man's influence. Streams, wetlands, and some aquifers along the southern boundary of the basin contain salty water. Overpumping has caused extensive saltwater intrusion in aquifers in the southern and eastern parts of New Haven. The total amount of fresh water used in the area during 1970 is estimated at 35,710 million gallons, or 183 gallons per day per capita. Public water-supply systems met the domestic requirements of about 90 percent of the population; all the systems supplied water that met the drinking water standards of the Connecticut Department of Health.

Connecticut↗
USGS1999

Age, double porosity, and simple reaction modifications for the MOC3D ground-water transport model

This report documents modifications for the MOC3D ground-water transport model to simulate (a) ground-water age transport; (b) double-porosity exchange; and (c) simple but flexible retardation, decay, and zero-order growth reactions. These modifications are incorporated in MOC3D version 3.0. MOC3D simulates the transport of a single solute using the method-of-characteristics numerical procedure. The age of ground water, that is the time since recharge to the saturated zone, can be simulated using the transport model with an additional source term of unit strength, corresponding to the rate of aging. The output concentrations of the model are in this case the ages at all locations in the model. Double porosity generally refers to a separate immobile-water phase within the aquifer that does not contribute to ground-water flow but can affect solute transport through diffusive exchange. The solute mass exchange rate between the flowing water in the aquifer and the immobile-water phase is the product of the concentration difference between the two phases and a linear exchange coefficient. Conceptually, double porosity can approximate the effects of dead-end pores in a granular porous media, or matrix diffusion in a fractured-rock aquifer. Options are provided for decay and zero-order growth reactions within the immobile-water phase. The simple reaction terms here extend the original model, which included decay and retardation. With these extensions, (a) the retardation factor can vary spatially within each model layer, (b) the decay rate coefficient can vary spatially within each model layer and can be different for the dissolved and sorbed phases, and (c) a zero-order growth reaction is added that can vary spatially and can be different in the dissolved and sorbed phases. The decay and growth reaction terms also can change in time to account for changing geochemical conditions during transport. The report includes a description of the theoretical basis of the model, a detailed description of input requirements and output options, and the results of model testing and evaluation. The model tests illustrate use of these modifications and demonstrate that accurate solutions can be obtained for these simple cases. Two test cases have no dispersion, illustrating the suitability of this method-of-characteristics model for simulation of advection-dominated transport in ground water.

Water-Resources Investigations Report↗
USGS2000

Shoals and valley plugs in the Hatchie River watershed

Agricultural land use and gully erosion have historically contributed more sediment to the streams of the Hatchie River watershed than those streams can carry. In 1970, the main sedimentation problem in the watershed occurred in the tributary flood plains. This problem motivated channelization projects (U.S. Department of Agriculture, 1970). By the mid-1980's, concern had shifted to sedimentation in the Hatchie River itself where channelized tributaries were understood to contribute much of the sediment. The Soil Conservation Service [Natural Resources Conservation Service (NRCS) since 1996] estimated that 640,000 tons of bedload (sand) accumulates in the Hatchie River each year and identified roughly the eastern two-thirds of the watershed, where loess is thin or absent, as the main source of sand (U.S. Department of Agriculture, 1986a). The U.S. Geological Survey (USGS), in cooperation with the West Tennessee River Basin Authority (WTRBA), conducted a study of sediment accumulation in the Hatchie River and its tributaries. This report identifies the types of tributaries and evaluates sediment, shoal formation, and valley-plug problems. The results presented here may contribute to a better understanding of similar problems in West Tennessee and the rest of the southeastern coastal plain. This information also will help the WTRBA manage sedimentation and erosion problems in the Hatchie River watershed. The source of the Mississippi section of the Hatchie River is in the sand hills southwest of Corinth, Mississippi (fig. 1). This section of the Hatchie River flows northward in an artificial drainage canal, gathering water from tributary streams that also are channelized. The drainage canal ends 2 miles south of the Tennessee State line. The Tennessee section of the Hatchie River winds north and west in a meandering natural channel to the Mississippi River. Although most of the Hatchie River tributaries are also drainage canals, the river's main stem has kept most of its natural character. The Hatchie River flows through a wide valley bottom occupied mostly by riverine wetland. Historically, the valley bottom has supported hardwood forests. Since publication of the first Hatchie River report (U.S. Department of Agriculture, 1970), the channel of the river has become shallower, and flooding has increased (U.S. Department of Agriculture 1986b). These wetter conditions inhibit growth of hardwoods and lead to premature hardwood mortality. The NRCS has predicted that despite efforts to control erosion in the uplands, most of the valley-bottom forest will die. '...swamping may be so prevalent as to change most of the Hatchie River Basin flood plain into a marsh condition, with the only remnants of the present bottomland hardwood timber remaining. (U.S. Department of Agriculture, 1986b). Loss of channel depth has been concentrated in short reaches near tributary mouths. At the mouths of Richland, Porters, Clover, and Muddy Creeks, navigation has become difficult for recreational users (Johnny Carlin, West Tennessee River Basin Authority, oral commun., 1998). As the low-gradient alluvial system of the Hatchie River accumulates sediment, another common outcome has been the formation of valley plugs, areas where 'channels are filled with sediment, and all the additional bedload brought downstream is then spread out over the flood plain until a new channel has been formed' (Happ, 1975). Valley plugs typically form where the slope of a sand-laden tributary decreases downstream, or where the tributary joins its parent stream (Happ and others, 1940; Diehl, 1994, 1997; Smith and Diehl, 2000).

Mississippi, Tennessee↗
USGS1981

Streamflow characteristics of the Hudson Bay and Upper Missouri River Basins, Montana, through 1979

Statistical summaries of streamflow data for selected gaging stations are presented in this report to aid in appraising the hydrology of the Hud son Bay and upper Missouri River basins in Montana. Streamflow records are presented for 122 gaging stations for the period of record of each station. Streamflow-record collection in the Missouri River basin began in 1890 at Fort Benton, Montana. For each streamflow-gaging station selected for this report, a brief description is given for station location, drainage area, period of record, revisions of previously published records, type and history of gages, regulation and diversions, average discharge, and extremes of discharge. These data are followed by tables of monthly and annual mean discharge, flood-frequency data, low-flow and high-flow frequency data, and flow-duration information.

Montana↗
USGS2003

Trends in suspended-sediment concentration at selected stream sites in Kansas, 1970–2002

Knowledge of erosion, transport, and deposition of sediment relative to streams and impoundments is important to those involved directly or indirectly in the development and management of water resources. Monitoring the quantity of sediment in streams and impoundments is important because: (1) sediment may degrade the water quality of streams for such uses as municipal water supply, (2) sediment is detrimental to the health of some species of aquatic animals and plants, and (3) accumulation of sediment in water-supply impoundments decreases the amount of storage and, therefore, water available for users. One of the objectives of the Kansas Water Plan is to reduce the amount of sediment in Kansas streams by 2010. During the last 30 years, millions of dollars have been spent in Kansas watersheds to reduce sediment transport to streams. Because the last evaluation of trends in suspended-sediment concentrations in Kansas was completed in 1985, 14 sediment sampling sites that represent 10 of the 12 major river basins in Kansas were reestablished in 2000. The purpose of this report is to present the results of time-trend analyses at the reestablished sediment data-collection sites for the period of about 1970–2002 and to evaluate changes in the watersheds that may explain the trends. Time-trend tests for 13 of 14 sediment sampling sites in Kansas for the period from about 1970 to 2002 indicated that 3 of the 13 sites tested had statistically significant decreasing suspended-sediment concentrations; however, only 2 sites, Walnut River at Winfield and Elk River at Elk Falls, had trends that were statistically significant at the 0.05 probability level. Increasing suspended-sediment concentrations were indicated at three sites although none were statistically significant at the 0.05 probability level. Samples from five of the six sampling sites located upstream from reservoirs indicated decreasing suspended-sediment concentrations. Watershed impoundments located in the respective river basins may contribute to the decreasing suspended-sediment trends exhibited at most of the sampling sites because the impoundments are designed to trap sediment. Both sites that exhibited statistically significant decreasing suspended-sediment concentrations have a large number of watershed impoundments located in their respective drainage basins. The relation between percentage of the watershed affected by impoundments and trend in suspended-sediment concentration for 11 sites indicated that, as the number of impoundments in the watershed increases, suspended-sediment concentration decreases. Other conservation practices, such as terracing of farm fields and contour farming, also may contribute to the reduced suspended-sediment concentrations if their use has increased during the period of analysis. Regression models were developed for 13 of 14 sediment sampling sites in Kansas and can be used to estimate suspended-sediment concentration if the range in stream discharge for which they were developed is not exceeded and if time trends in suspended-sediment concentrations are not significant. For those sites that had a statistically significant trend in suspended-sediment concentration, a second regression model was developed using samples collected during 2000–02. Past and current studies by the U.S. Geological Survey have shown that regression models can be developed between in-stream measurements of turbidity and laboratory-analyzed sediment samples. Regression models were developed for the relations between discharge and suspended-sediment concentration and turbidity and suspended-sediment concentration for 10 sediment sampling sites using samples collected during 2000–02.

Kansas↗
USGS1988

Water use for aquaculture in Minnesota, 1984

Aquaculture supports a large sportfishing industry in Minnesota. Licensed fish farms that hatch and (or) harvest minnows or gamefish are located throughout the State. The volume of water used in these operations can be expressed as the minimum capacity per pound of fish, total water consumed, total water dedicated to the farming operation, or total water withdrawn. In expressing water dedicated to the farming operation, the total surface area of water bodies dedicated to aquaculture in Minnesota in 1984 was about 141,500 acres, based on interpretation of data reported in license applications. Water withdrawals to fish holding tanks amounted to 0.73 million gallons per day in 1984. Water-use calculations address the possibility of errors in reporting. About 15 percent of the licensees use municipally supplied water for their holding tanks. One thermoelectric powerplant recently began reusing the heated water from its cooling towers to raise catfish. Little change in the number of licensees since 1980 -indicates that aquaculture is a viable segment of the Minnesota economy. Trout farming has grown from 10 farms in 1978, to 23 in 1984; most use dug ponds sustained by ground-water inflow. Withdrawals for aquaculture are nonconsumptive and are small compared to other water-use categories in Minnesota.

Minnesota↗
USGS2003

Chapter A7. Section 7.0. Five-Day Biochemical Oxygen Demand

The presence of a sufficient concentration of dissolved oxygen is critical to maintaining the aquatic life and aesthetic quality of streams and lakes. Determinng how organic matter affects the concentration of dissolved oxygen (DO) in a stream or lake is integral to water-quality management. The decay of organic matter in water is measured as biochemical or chemical oxygen demand. This report describes the field protocols used by U.S. Geological Survey (USGS) personnel to determine the five-day test for biochemical oxygen demand. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters will be announced on the USGS Home Page on the World Wide Web under 'New Publications of the U.S. Geological Survey.'

Techniques of Water-Resources Investigations↗
USGS1997

A Hydrogeologic Map of the Death Valley Region, Nevada and California, Developed Using GIS Techniques

In support of Yucca Mountain site characterization studies, a hydrogeologic framework was developed, and a hydrogeologic map was constructed for the Death Valley region. The region, covering approximately 100,000 km 2 along the Nevada-California border near Las Vegas, is characterized by isolated mountain ranges juxtaposed against broad, alluvium-filled valleys. Geologic conditions are typical of the Basin and Range Province; a variety of sedimentary and igneous intrusive and extrusive rocks have been subjected to both compressional and extensional deformation. The regional ground-water flow system can best be described as a series of connected intermontane basins in which ground-water flow occurs in basin-fill deposits, carbonate rocks, clastic rocks, and volcanic rocks. Previous investigations have developed more site-specific hydrogeologic relationships; however, few have described all the lithologies within the Death Valley regional ground-water flow system. Information required to characterize the hydrogeologic units in the region was obtained from regional geologic maps and reports. Map data were digitized from regional geologic maps and combined into a composite map using a geographic information system. This map was simplified to show 10 laterally extensive hydrogeologic units with distinct hydrologic properties. The hydraulic conductivity values for the hydrogeologic units range over 15 orders of magnitude due to the variability in burial depth and degree of fracturing.

Water-Resources Investigations Report↗
USGS2003

Ground-water conditions and studies in Georgia, 2001

The U.S. Geological Survey (USGS) collects ground-water data and conducts studies to monitor hydrologic conditions, to better define ground-water resources, and address problems related to water supply and water quality. Data collected as part of ground-water studies include geologic, geophysical, hydraulic property, water level, and water quality. A ground-water-level network has been established throughout most of the State of Georgia, and ground-water-quality networks have been established in the cities of Albany, Savannah, and Brunswick and in Camden County, Georgia. Ground-water levels are monitored continuously in a network of wells completed in major aquifers of the State. This network includes 17 wells in the surficial aquifer, 12 wells in the upper and lower Brunswick aquifers, 73 wells in the Upper Floridan aquifer, 10 wells in the Lower Floridan aquifer and underlying units, 12 wells in the Claiborne aquifer, 1 well in the Gordon aquifer, 11 wells in the Clayton aquifer, 11 wells in the Cretaceous aquifer system, 2 wells in Paleozoic-rock aquifers, and 7 wells in crystalline-rock aquifers. In this report, data from these 156 wells were evaluated to determine whether mean-annual ground-water levels were within, below, or above the normal range during 2001, based on summary statistics for the period of record. Information from these summaries indicates that water levels during 2001 were below normal in almost all aquifers monitored, largely reflecting climatic effects from drought and pumping. In addition, water-level hydrographs for selected wells indicate that water levels have declined during the past 5 years (since 1997) in almost all aquifers monitored, with water levels in some wells falling below historical lows. In addition to continuous water-level data, periodic measurements taken in 52 wells in the Camden County-Charlton County area, and 65 wells in the city of Albany-Dougherty County area were used to construct potentiometric-surface maps for the Upper Floridan aquifer. Ground-water quality in the Upper Floridan aquifer is monitored in the cities of Albany, Savannah, and Brunswick and in Camden County; and monitored in the Lower Floridan aquifer in the Savannah and Brunswick areas. In the Albany area since 1998, nitrate concentrations in the Upper Floridan aquifer have increased in 4 of the 11 wells monitored, and in 1 well, concentrations were above the U.S. Environmental Protection Agency's (USEPA) 10 milligrams per liter (mg/L) drinking-water standard. In the Savannah area, chloride concentration in water from four wells in the Upper Floridan aquifer showed no appreciable change during 2001, remaining within the USEPA 250 mg/L drinking-water standard; in seven wells completed in the Lower Floridan aquifer and in underlying zones, the chloride concentration remained above the drinking-water standard, with one well showing an increase over previous years. In the Brunswick area, water samples from 66 wells completed in the Upper or Lower Floridan aquifers were collected during June 2001 and analyzed for chloride. A map showing chloride concentrations in the Upper Floridan aquifer during June 2001 indicates that concentrations remained above USEPA drinking-water standards across a 2-square-mile area. In the north Brunswick area, chloride concentrations in the Upper Floridan aquifer continued to increase, whereas in the south Brunswick area, concentrations continued to decrease. In the Camden County area, chloride concentrations in six wells completed in the Upper Floridan aquifer remained within drinking-water standards. With the exception of one well, concentrations remained the same and were below 40 mg/L. In one well, concentrations showed a sharp decline during 2001, but remained above 130 mg/L. Ongoing studies during 2001 include evaluation of agricultural chemicals in shallow ground water in southwestern Georgia; evaluation of saltwater intrusion and water-level and water-quality m

Georgia↗
USGS1975

Aquifer tests in the Summit reach of the proposed Cross-Florida Barge Canal near Ocala, Florida

Values for the horizontal and vertical hydraulic conductivity of Floridan aquifer materials are estimated by analyses of specially-designed aquifer tests at three sites along the Summit Pool reach of the proposed Cross-Florida Barge Canal for use in evaluating the exchange of water between the aquifer and the canal. Methods are described that deal with unique boundary conditions and aquifer anisotropy at two sites. Extreme aquifer heterogeneity precluded the determination of aquifer coefficients at one of the sites and probably affected the results of the tests at the other two. Therefore, the calculated aquifer coefficients reported should be regarded only as estimates. Calculated coefficients of horizontal hydraulic conductivity ranged from 0.025 to 3,500 gallons per day per square foot (0.0010 to 143 metres per day) and calculated coefficients of vertical hydraulic conductivity ranged from 0.05 to 23,000 gallons per day per square foot (0.0021 to 943 metres per day). Ratio of horizontal to vertical hydraulic conductivity ranged from 0.09 to 2.9.

Florida↗
USGS1985

Potentiometric surfaces of the coastal plain aquifers of South Carolina prior to development

Characteristics of the Coastal Plains aquifers of South Carolina are being studied as a part of the Regional Aquifer Systems Analysis program of the U.S. Geological Survey. A framework has been developed to best represent the hydrology of the Coastal Plain aquifers by dividing them into a system of five aquifers. This framework includes a surficial aquifer consisting of coastal terrace deposits, a limestone and stratigraphically equivalent sand aquifer of Eocene age, and three sand aquifers of Cretaceous age. This report presents a general description of the aquifer framework, potentiometric maps for the aquifers of Eocene and Cretaceous age prior to development, and a general description of the flow system prior to development. In the lower Coastal Plain, flow in the aquifer of Eocene age is generally perpendicular to the coast but is almost parallel to the coast in the aquifers of Cretaceous age. (USGS)

South Carolina↗
USGS1985

Percentage change in saturated thickness of the High Plains aquifer, west-central Kansas, 1950 to average 1983-85

Continuing studies are being made in west-central Kansas to provide up-to-date information to aid in the management of groundwater for irrigation. This report, prepared in cooperation with the Western Kansas Groundwater Management District No. 1, presents the fifth in a series of studies that uses a statistical technique, called kriging, to produce hydrologic maps that are used as management tools. Kriging is a statistical technique that was used to interpolate water level altitudes at the center of each 1-square-mile section in the study area based on measured water levels at 165 observation wells. These interpolation altitudes (1,859 in all), along with bedrock surface and base year water table altitudes, were used to prepare a geohydrologic map illustrating percentage change in saturated thickness. Saturated thickness, as used in this report, is the thickness of the High Plains aquifer between the groundwater surface indicated by water table altitudes and the bedrock surface. Because irrigation development in west-central Kansas was minimal prior to 1950, the saturated thickness during 1950 represented a nearly static condition in the aquifer. Thus, the effects of irrigation withdrawalson the volume of water in storage could be related to the decrease or percentage change in saturated thickness of the aquifer from 1950 to average saturated thickness during 1983-85.

Kansas↗