Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sensors”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources
USGS2020

Passive seismic survey of sediment thickness, Dasht-e-Nawar basin, eastern Afghanistan

Exploration of water resources is needed for public supply, extraction of mineral resources, and economic development in Afghanistan. Remotely-sensed data are useful for identifying the general nature of surface sediments, however, “boots on the ground” geophysical surveys or drilling programs are needed to quantify the thickness of sediments or aquifers. The nature of such investigations presents a risk to field crews that may prohibit exploration of potentially valuable aquifers or mineral resources. The Dasht-e-Nawar basin, in east-central Afghanistan, contains a 400 km2 playa that includes evaporative mineral deposits, particularly lithium, which has been of interest since the 1970s. However, exploration of the basin, as with many areas of Afghanistan, has been hampered by decades of conflict. In 2014, an investigation of the basin was conducted by the U.S. Department of Defense Task Force for Business and Stability Operations (TFBSO), and their contractor, in cooperation with the U.S. Geological Survey (USGS). For this investigation the USGS compared the results of a rapid passive seismic survey of basin sediment thickness to the results of an independently conducted gravity survey of the same area. Each point measurement for the passive seismic method requires less than 30 minutes in the field by one person. The technique utilizes ambient seismic noise without an external sound source such as required by traditional seismic surveys. Additionally, the technique does not require external sensor arrays, which can be kilometers long for some geophysical techniques. The passive seismic equipment used in this study weighs approximately 1 kilogram and is about 10 cm3 in size. Although relatively new for assessment of sediment thickness, several investigations have found this method to be capable of estimating sediment thicknesses, in the 10’s to 1000 meter range, in settings with unconsolidated sediment over bedrock and a contrast in acoustic impedance. In this investigation, the gravity survey was conducted during a period of 3 weeks by an experienced field crew; required a detailed, centimeter-scale land elevation survey; and required laboratory analyses of sediment and rock densities to interpret the gravity data. In contrast, the passive seismic survey was collected by two inexperienced operators over a period of 8 days and required no additional data to interpret. Due to security restrictions, USGS personnel could not visit the site and the seismic operator was trained immediately prior to the field work. Although the quality of the seismic survey was affected by strong afternoon winds, and by the inexperience of the field operator, the results were fairly comparable to the gravity survey. Similar basin sediment thicknesses and patterns in sediment thickness were identified by both surveys in the basin with an estimated maximum thickness of approximately 170 m. The passive seismic technique required substantially less field resources and time than would be required by other geophysical surveys. Although this method will not be effective in all geologic settings, it may be a valuable assessment tool for use before conducting other, more intensive, geophysical efforts or drilling programs, especially in regions with elevated security risks such as Afghanistan.

Dasht-e-Nawar basin↗
USGS2024

Remote sensing of volcano deformation and surface change

Volcanic unrest and eruptions are associated with surface deformation and landscape change that can be detected, characterized, and tracked via remote sensing measurements. Subsurface processes, including magma accumulation, withdrawal, and transport, can cause displacements at the surface that are best tracked at subaerial volcanoes with interferometric synthetic aperture radar (InSAR) and Global Navigation Satellite System (GNSS) measurements, although non-volcanic activity, like hydrothermal and tectonic sources, can complicate interpretations. Surface change is often associated with the emplacement of volcanic deposits, which modify the landscape and can experience post-emplacement deformation or morphological changes over time. Measurement of surface topography at volcanoes via remote means is a particularly important capability, given the control that topography exerts on many volcanic hazards and the potential for topographic change measurements to provide information about eruption rates. A much broader set of tools is available to investigate surface change at volcanoes, including not only InSAR and GNSS, but also synthetic aperture radar amplitude data, visible imagery, and lidar, acquired from airborne, ground-based, and satellite platforms. These data can also be used to identify instability of volcanic flanks and even have potential for use in detecting airborne ash plumes. Although hidden from traditional airborne and space-based remote sensing, deformation and surface change associated with submarine volcanism can be investigated with pressure sensors and bathymetric measurements—the below-water remote sensing analogs of GNSS and InSAR, respectively.

Book chapter↗
USGS2025

Monitoring lightning and electrification in volcanic plumes

Detection of the electrical discharges and, more fundamentally, the electrification from volcanic plumes is an emerging capability for volcano monitoring. In addition to being able to detect an explosive eruption, such measurements also provide insight into volcanic processes. Volcanic lightning monitoring can be achieved through varying levels of complexity. At the lowest complexity, an observatory can use low-cost global lightning data sets for eruption detection and characterization, while at the highest complexity local lightning sensors can be installed to improve the level of observational detail and response times. This chapter provides background about volcanic lightning and plume electrification, information concerning the relevant instrumentation to detect lightning and electrified plumes, examples of how lightning can be used to understand eruptive processes, and a guide to implementing volcanic lightning detection into a monitoring scheme.

Book chapter↗
USGS2017

Monitoring protocols: Options, approaches, implementation, benefits

Monitoring and adaptive management are fundamental concepts to rangeland management across land management agencies and embodied as best management practices for private landowners. Historically, rangeland monitoring was limited to determining impacts or maximizing the potential of specific land uses—typically grazing. Over the past several decades, though, the uses of and disturbances to rangelands have increased dramatically against a backdrop of global climate change that adds uncertainty to predictions of future rangeland conditions. Thus, today’s monitoring needs are more complex (or multidimensional) and yet still must be reconciled with the realities of costs to collect requisite data. However, conceptual advances in rangeland ecology and management and changes in natural resource policies and societal values over the past 25 years have facilitated new approaches to monitoring that can support rangeland management’s diverse information needs. Additionally, advances in sensor technologies and remote-sensing techniques have broadened the suite of rangeland attributes that can be monitored and the temporal and spatial scales at which they can be monitored. We review some of the conceptual and technological advancements and provide examples of how they have influenced rangeland monitoring. We then discuss implications of these developments for rangeland management and highlight what we see as challenges and opportunities for implementing effective rangeland monitoring. We conclude with a vision for how monitoring can contribute to rangeland information needs in the future.

Book chapter↗
USGS2018

GNIS-LD: Serving and visualizing the Geographic Names Information System Gazetteer as linked data

In this dataset description paper we introduce the GNIS-LD, an authoritative and public domain Linked Dataset derived from the Geographic Names Information System (GNIS) which was developed by the U.S. Geological Survey (USGS) and the U.S. Board on Geographic Names. GNIS provides data about current, as well as historical, physical, and cultural geographic features in the United States. We describe the dataset, introduce an ontology for geographic feature types, and demonstrate the utility of recent linked geographic data contributions made in conjunction with the development of this resource. Co-reference resolution links to GeoNames.org and DBpedia are provided in the form of owl:sameAs relations. Finally, we point out how the adapted workflow is foundational for complex Digital Line Graph (DLG) data from the USGS National Map and how the GNIS-LD data can be integrated with DLG and other data sources such as sensor observations.

Conference Paper↗
USGS2019

Volcano deformation: Insights into magmatic systems

Volcano geodesy is the branch of geodetic science that deals with the changing shapes of volcanoes, whether large or small, deep-seated or surficial. Together with seismicity and volcanic gas flux, deformation of the ground surface can be a key indicator of subsurface conditions and processes at volcanoes—information that not only improves scientific understanding of magmatic systems but also is useful for assessing volcano hazards and mitigating their potential consequences. To take full advantage of such information requires detailed characterization of the deformation field in space and time. Currently, no single geodetic technique is capable of providing both the high spatial and temporal resolution required. However, important advances have been made recently by combining information from real-time in situ sensors such as continuous GPS, strainmeters, and tiltmeters with repeated campaign-style GPS, microgravity, interferometric synthetic aperture radar (InSAR), lidar, and photogrammetric observations. Continuous real-time data constrain the timing but not necessarily the spatial extent and pattern of deformation, whereas InSAR provides detailed spatial information but only at intervals of several days to weeks. Repeated microgravity surveys, when combined with independent measurements of surface height, are uniquely sensitive to changes in subsurface mass distribution and therefore can be used to distinguish among processes driven by magma, hydrous fluids, or gas. Simultaneous analysis of multiple geodetic datasets, especially when guided by information from global volcano databases and numerical simulations of volcanic processes and products, can provide a statistical basis for outcome prediction and serve as a guide for additional observations. In the foreseeable future, interactions among magmatic, tectonic, and hydrothermal systems will be monitored and modeled at regional scale in real time, enabling new insights into Earth’s subsurface environment.

Book chapter↗
USGS2009

Seismic monitoring to assess performance of structures in near-real time: Recent progress

Earlier papers have described how observed data from classical accelerometers deployed in structures or from differential GPS with high sampling ratios deployed at roofs of tall buildings can be configured to establish seismic health monitoring of structures. In these configurations, drift ratios are the main parametric indicator of damage condition of a structure or component of a structure. Real-time measurement of displacements are acquired either by double integration of accelerometer time-series data, or by directly using GPS. Recorded sensor data is then related to the performance level of a building. Performance-based design method stipulates that for a building the amplitude of relative displacement of the roof of a building (with respect to its base) indicates its performance. Usually, drift ratio is computed using relative displacement between two consecutive floors. When accelerometers are used, determination of displacement is possible by strategically deploying them at a select number of pairs of consecutive floors. For these determinations, software is used to compute displacements and drift ratios in real-time by double integration of accelerometer data. However, GPS-measured relative displacements are limited to being acquired only at the roof with respect to its reference base. Thus, computed drift ratio is the average drift ratio for the whole building. Until recently, the validity of measurements using GPS was limited to long-period structures (T>1 s) because GPS systems readily available were limited to 10–20 samples per seconds (sps) capability. However, presently, up to 50 sps differential GPS systems are available on the market and have been successfully used to monitor drift ratios [1, Panagitou et al. (Seismic Response of ReinForced Concrete Wall Buildings, 2006)], (Restrepo, pers. comm. 2007) – thus enabling future usefulness of GPS to all types of structures. Several levels of threshold drift ratios can be postulated in order to make decisions for inspections and/or occupancy. Experience with data acquired from both accelerometers and GPS deployments indicates that they are reliable and provide pragmatic alternatives to alert the owners and other authorized parties to make informed decisions and select choices for pre-defined actions following significant events. Furthermore, recent adoption of such methods by financial and industrial enterprises is testimony to their viability.

Book chapter↗
USGS2009

Passive seismic monitoring of natural and induced earthquakes: Case studies, future directions and socio-economic relevance

An important discovery in crustal mechanics has been that the Earth’s crust is commonly stressed close to failure, even in tectonically quiet areas. As a result, small natural or man-made perturbations to the local stress field may trigger earthquakes. To understand these processes, Passive Seismic Monitoring (PSM) with seismometer arrays is a widely used technique that has been successfully applied to study seismicity at different magnitude levels ranging from acoustic emissions generated in the laboratory under controlled conditions, to seismicity induced by hydraulic stimulations in geological reservoirs, and up to great earthquakes occurring along plate boundaries. In all these environments the appropriate deployment of seismic sensors, i.e., directly on the rock sample, at the earth’s surface or in boreholes close to the seismic sources allows for the detection and location of brittle failure processes at sufficiently low magnitude-detection threshold and with adequate spatial resolution for further analysis. One principal aim is to develop an improved understanding of the physical processes occurring at the seismic source and their relationship to the host geologic environment. In this paper we review selected case studies and future directions of PSM efforts across a wide range of scales and environments. These include induced failure within small rock samples, hydrocarbon reservoirs, and natural seismicity at convergent and transform plate boundaries. Each example represents a milestone with regard to bridging the gap between laboratory-scale experiments under controlled boundary conditions and large-scale field studies. The common motivation for all studies is to refine the understanding of how earthquakes nucleate, how they proceed and how they interact in space and time. This is of special relevance at the larger end of the magnitude scale, i.e., for large devastating earthquakes due to their severe socio-economic impact.

Book chapter↗
USGS2010

Real-time seismic monitoring of structures: Data handling and case studies

Within the last decade, advances in the acquisition, processing and transmission of data from real-time seismic monitoring systems has contributed to the growth in the number structures instrumented with such systems. An equally important factor for such growth can be attributed to the demands by stakeholders to find rapid answers to important questions related to the functionality (or “state of health”) of structures during and immediately following a seismic event. Hence, rapid and accurate assessment of the damage condition or performance of a building or a lifeline structure is of paramount importance to stakeholders, including owners, leasers, permanent and/or temporary occupants, users of infrastructures, city officials and rescue teams that are concerned with safety of those in the building, and those that may be affected in nearby buildings and infrastructures. In earlier papers, we described how observed data from sensors deployed in structures can be configured to establish seismic health monitoring of structures. In these configurations, drift ratios are the main parametric indicator of damage condition of a building. The process described for buildings can be applied directly for bridges as well. For bridges, the term, “drift ratio” is not generally used; however, relative displacements of critical elements of a bridge can be construed as such. While real-time data from structural arrays indicate that these methods are reliable and provide requisite information for owners and other parties to make informed decisions and to choose among pre-defined actions following significant events, there are several issues related to data ownership, transmission and archiving. This paper examines the real-time seismic monitoring systems deployed mainly in the United States, with particular attention to data issues – handling, dissemination, storage, and archiving. In most cases, due to the numerous channels involved, the deployments in each one of the real-time structures can be considered to be an individual array. Two detailed cases are described that demonstrate the variability in data ownership and dissemination.

Book chapter↗
USGS2005

Suspended sediment fluxes in a tidal wetland: Measurement, controlling factors, and error analysis

Suspended sediment fluxes to and from tidal wetlands are of increasing concern because of habitat restoration efforts, wetland sustainability as sea level rises, and potential contaminant accumulation. We measured water and sediment fluxes through two channels on Browns Island, at the landward end of San Francisco Bay, United States, to determine the factors that control sediment fluxes on and off the island. In situ instrumentation was deployed between October 10 and November 13, 2003. Acoustic Doppler current profilers and the index velocity method were employed to calculate water fluxes. Suspended sediment concentrations (SSC) were determined with optical sensors and cross-sectional water sampling. All procedures were analyzed for their contribution to total error in the flux measurement. The inability to close the water balance and determination of constituent concentration were identified as the main sources of error; total error was 27% for net sediment flux. The water budget for the island was computed, with an unaccounted input of 0.20 m 3 s −1 (22% of mean inflow), after considering channel flow, change in water storage, evapotranspiration, and precipitation. The net imbalance may be a combination of groundwater seepage, overland flow, and flow through minor channels. Change of island water storage, caused by local variations in water surface elevation, dominated the tidally averaged water flux. These variations were mainly caused by wind and barometric pressure change, which alter regional water levels throughout the Sacramento-San Joaquin River Delta. Peak instantaneous ebb flow was 35% greater than peak flood flow, indicating an ebbdominant system, though dominance varied with the spring-neap cycle. SSC were controlled by wind-wave resuspension adjacent to the island and local tidal currents that mobilized sediment from the channel bed. During neap tides sediment was imported onto the island but during spring tides sediment was exported because the main channel became ebb dominant. Over the 34-d monitoring period 14,000 kg of suspended sediment were imported through the two channels. The water imbalance may affect the sediment balance if the unmeasured water transport pathways are capable of transporting large amounts of sediment. We estimate a maximum of 2,800 kg of sediment may have been exported through unmeasured pathways, giving a minimum ent import of 11,200 kg. Sediment flux measurements provide insight on tidal to fortnightly marsh sedimentation processes, especially in complex systems where sedimentation is spatially and temporally variable.

California↗
USGS2006

Biofouling and the continuous monitoring of underwater light from a seagrass perspective

For more than a decade, inexpensive electronic instruments have made continuous underwater light monitoring an integral part of many seagrass studies. Although biofouling, if not controlled, compromises the utility of the record. A year-long assessment of the time course of sensor fouling, in the Laguna Madre of Texas established that light transmitted through the fouling layer after 2 wk of exposure exceeded 90% except for a 6–8 wk period in May and June. On that basis, a 2-wk interval was chosen for routine servicing. Subsequent monitoring proved this choice to be grossly in error. The period of sub-90% transmittance after 2 wk extended to 4–6 mo annually over the next 3 yr. Fouling was strongly correlated with temperature, ambient light, and year. Since an algal bloom of 7-yr duration finally waned during this study, increased ambient light seemed most likely to explain increased fouling later in the study. The explanatory value of light was less than temperature or year in multiple regression, requiring some other explanation of the date effect than change in ambient light. Allelopathic and suspension-feeding depressant effects of the brown tide are offered as the most likely cause of unusually low fouling in the first year. Biofouling was so unpredictable and rapid in this study that at least weekly maintenance would be required to assure reliability of the light monitoring record.

Texas↗
USGS2014

Laboratory generated M -6 earthquakes

We consider whether mm-scale earthquake-like seismic events generated in laboratory experiments are consistent with our understanding of the physics of larger earthquakes. This work focuses on a population of 48 very small shocks that are foreshocks and aftershocks of stick–slip events occurring on a 2.0 m by 0.4 m simulated strike-slip fault cut through a large granite sample. Unlike the larger stick–slip events that rupture the entirety of the simulated fault, the small foreshocks and aftershocks are contained events whose properties are controlled by the rigidity of the surrounding granite blocks rather than characteristics of the experimental apparatus. The large size of the experimental apparatus, high fidelity sensors, rigorous treatment of wave propagation effects, and in situ system calibration separates this study from traditional acoustic emission analyses and allows these sources to be studied with as much rigor as larger natural earthquakes. The tiny events have short (3–6 μs) rise times and are well modeled by simple double couple focal mechanisms that are consistent with left-lateral slip occurring on a mm-scale patch of the precut fault surface. The repeatability of the experiments indicates that they are the result of frictional processes on the simulated fault surface rather than grain crushing or fracture of fresh rock. Our waveform analysis shows no significant differences (other than size) between the M -7 to M -5.5 earthquakes reported here and larger natural earthquakes. Their source characteristics such as stress drop (1–10 MPa) appear to be entirely consistent with earthquake scaling laws derived for larger earthquakes.

Pure and Applied Geophysics↗
USGS2002

The National Vegetation Classification Standard applied to the remote sensing classification of two semiarid environments

The National Vegetation Classification Standard (NVCS) was implemented at two US National Park Service (NPS) sites in Texas, the Padre Island National Seashore (PINS) and the Lake Meredith National Recreation Area (LM-NRA), to provide information for NPS oil and gas management plans. Because NVCS landcover classifications did not exist for these two areas prior to this study, we created landcover classes, through intensive ground and aerial reconnaissance, that characterized the general landscape features and at the same time complied with NVCS guidelines. The created landcover classes were useful for the resource management and were conducive to classification with optical remote sensing systems, such as the Landsat Thematic Mapper (TM). In the LMNRA, topographic elevation data were added to the TM data to reduce confusion between cliff, high plains, and forest classes. Classification accuracies (kappa statistics) of 89.9% (0.89) and 88.2% (0.87) in PINS and LMNRA, respectively, verified that the two NPS landholdings were adequately mapped with TM data. Improved sensor systems with higher spectral and spatial resolutions will ultimately refine the broad classes defined in this classification; however, the landcover classifications created in this study have already provided valuable information for the management of both NPS lands. Habitat information provided by the classifications has aided in the placement of inventory and monitoring plots, has assisted oil and gas operators by providing information on sensitive habitats, and has allowed park managers to better use resources when fighting wildland fires and in protecting visitors and the infrastructure of NPS lands.

Environmental Management↗
USGS2020

Effects of a temperature rise on melatonin and thyroid hormones during smoltification of Atlantic salmon, Salmo salar

Smoltification prepares juvenile Atlantic salmon ( Salmo salar ) for downstream migration. Dramatic changes characterize this crucial event in the salmon’s life cycle, including increased gill Na + /K + -ATPase activity (NKA) and plasma hormone levels. The triggering of smoltification relies on photoperiod and is modulated by temperature. Both provide reliable information, to which fish have adapted for thousands of years, that allows deciphering daily and calendar time. Here we studied the impact of different photoperiod (natural, sustained winter solstice) and temperature (natural, ~ + 4° C) combinations, on gill NKA, plasma free triiodothyronine (T3) and thyroxine (T4), and melatonin (MEL; the time-keeping hormone), throughout smoltification. We also studied the impact of temperature history on pineal gland MEL production in vitro. The spring increase in gill NKA was less pronounced in smolts kept under sustained winter photoperiod and/or elevated temperature. Plasma thyroid hormone levels displayed day–night variations, which were affected by elevated temperature, either independently from photoperiod (decrease in T3 levels) or under natural photoperiod exclusively (increase in T4 nocturnal levels). Nocturnal MEL secretion was potentiated by the elevated temperature, which also altered the MEL profile under sustained winter photoperiod. Temperature also affected pineal MEL production in vitro, a response that depended on previous environmental acclimation of the organ. The results support the view that the salmon pineal is a photoperiod and temperature sensor, highlight the complexity of the interaction of these environmental factors on the endocrine system of S. salar , and indicate that climate change might compromise salmon’s time “deciphering” during smoltification, downstream migration and seawater residence.

Journal of Comparative Physiology B: Biochemical, ↗
USGS2017

Habitat degradation affects the summer activity of polar bears

Understanding behavioral responses of species to environmental change is critical to forecasting population-level effects. Although climate change is significantly impacting species’ distributions, few studies have examined associated changes in behavior. Polar bear ( Ursus maritimus ) subpopulations have varied in their near-term responses to sea ice decline. We examined behavioral responses of two adjacent subpopulations to changes in habitat availability during the annual sea ice minimum using activity data. Location and activity sensor data collected from 1989 to 2014 for 202 adult female polar bears in the Southern Beaufort Sea (SB) and Chukchi Sea (CS) subpopulations were used to compare activity in three habitat types varying in prey availability: (1) land; (2) ice over shallow, biologically productive waters; and (3) ice over deeper, less productive waters. Bears varied activity across and within habitats with the highest activity at 50–75% sea ice concentration over shallow waters. On land, SB bears exhibited variable but relatively high activity associated with the use of subsistence-harvested bowhead whale carcasses, whereas CS bears exhibited low activity consistent with minimal feeding. Both subpopulations had fewer observations in their preferred shallow-water sea ice habitats in recent years, corresponding with declines in availability of this substrate. The substantially higher use of marginal habitats by SB bears is an additional mechanism potentially explaining why this subpopulation has experienced negative effects of sea ice loss compared to the still-productive CS subpopulation. Variability in activity among, and within, habitats suggests that bears alter their behavior in response to habitat conditions, presumably in an attempt to balance prey availability with energy costs.

Oecologia↗
USGS2017

What to eat in a warming world: do increased temperatures necessitate hazardous duty pay?

Contemporary climate change affects nearly all biomes, causing shifts in animal distributions and resource availability. Changes in resource selection may allow individuals to offset climatic stress, thereby providing a mechanism for persistence amidst warming conditions. Whereas the role of predation risk in food choice has been studied broadly, the extent to which individuals respond to thermoregulatory risk by changing resource preferences is unclear. We addressed whether individuals compensated for temperature-related reductions in foraging time by altering forage preferences, using the American pika ( Ochotona princeps ) as a model species. We tested two hypotheses: (1) food-quality hypothesis—individuals exposed to temperature extremes should select higher-quality vegetation in return for accepting a physiologically riskier feeding situation; and (2) food-availability hypothesis—individuals exposed to temperature extremes should prioritize foraging quickly, thereby decreasing selection for higher-quality food. We quantified the composition and quality (% moisture, % nitrogen, and fiber content) of available and harvested vegetation, and deployed a network of temperature sensors to measure in situ conditions for 30 individuals, during July–Sept., 2015. Individuals exposed to more extreme daytime temperatures showed increased selection for high-nitrogen and for low-fiber vegetation, demonstrating strong support for the food-quality hypothesis. By contrast, pikas that experienced warmer conditions did not reduce selection for any of the three vegetation-quality metrics, as predicted by the food-availability hypothesis. By shifting resource-selection patterns, temperature-limited animals may be able to proximately buffer some of the negative effects associated with rapidly warming environments, provided that sufficient resources remain on the landscape.

Oecologia↗
USGS2006

Seismo-acoustic signals associated with degassing explosions recorded at Shishaldin Volcano, Alaska, 2003-2004

In summer 2003, a Chaparral Model 2 microphone was deployed at Shishaldin Volcano, Aleutian Islands, Alaska. The pressure sensor was co-located with a short-period seismometer on the volcano’s north flank at a distance of 6.62 km from the active summit vent. The seismo-acoustic data exhibit a correlation between impulsive acoustic signals (1–2 Pa) and long-period (LP, 1–2 Hz) earthquakes. Since it last erupted in 1999, Shishaldin has been characterized by sustained seismicity consisting of many hundreds to two thousand LP events per day. The activity is accompanied by up to ∼200 m high discrete gas puffs exiting the small summit vent, but no significant eruptive activity has been confirmed. The acoustic waveforms possess similarity throughout the data set (July 2003–November 2004) indicating a repetitive source mechanism. The simplicity of the acoustic waveforms, the impulsive onsets with relatively short (∼10–20 s) gradually decaying codas and the waveform similarities suggest that the acoustic pulses are generated at the fluid–air interface within an open-vent system. SO 2 measurements have revealed a low SO 2 flux, suggesting a hydrothermal system with magmatic gases leaking through. This hypothesis is supported by the steady-state nature of Shishaldin’s volcanic system since 1999. Time delays between the seismic LP and infrasound onsets were acquired from a representative day of seismo-acoustic data. A simple model was used to estimate source depths. The short seismo-acoustic delay times have revealed that the seismic and acoustic sources are co-located at a depth of 240±200 m below the crater rim. This shallow depth is confirmed by resonance of the upper portion of the open conduit, which produces standing waves with f =0.3 Hz in the acoustic waveform codas. The infrasound data has allowed us to relate Shishaldin’s LP earthquakes to degassing explosions, created by gas volume ruptures from a fluid–air interface.

Alaska↗
USGS2014

Identifying hazards associated with lava deltas

Lava deltas, formed where lava enters the ocean and builds a shelf of new land extending from the coastline, represent a significant local hazard, especially on populated ocean island volcanoes. Such structures are unstable and prone to collapse—events that are often accompanied by small explosions that can deposit boulders and cobbles hundreds of meters inland. Explosions that coincide with collapses of the East Lae ‘Apuki lava delta at Kīlauea Volcano, Hawai‘i, during 2005–2007 followed an evolutionary progression mirroring that of the delta itself. A collapse that occurred when the lava–ocean entry was active was associated with a blast of lithic blocks and dispersal of spatter and fine, glassy tephra. Shortly after delta growth ceased, a collapse exposed hot rock to cold ocean water, resulting in an explosion composed entirely of lithic blocks and lapilli. Further collapse of the delta after several months of inactivity, by which time it had cooled significantly, resulted in no recognizable explosion deposit. Seaward displacement and subsidence of the coastline immediately inland of the delta was measured by both satellite and ground-based sensors and occurred at rates of several centimeters per month even after the lava–ocean entry had ceased. The anomalous deformation ended only after complete collapse of the delta. Monitoring of ground deformation may therefore provide an indication of the potential for delta collapse, while the hazard associated with collapse can be inferred from the level of activity, or the time since the last activity, on the delta.

Bulletin of Volcanology↗