Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sedimentary Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

846 records · Page 47Linked to original sources
USGS1953

Ground-water conditions in the Milwaukee-Waukesha area, Wisconsin

Three major aquifers underlie the Milwaukee-Waukesha area: sandstones of Cambrian and Ordovician age, Niagara dolomite of Silurian age, and sand and gravel deposits of Pleistocene age. The Maquoketa shale of Ordovician age acts as a more or less effective seal between the Pleistocene deposits and Niagara dolomite above and the sandstone aquifer below. Crystalline rocks of pre-Cambrian age form an impermeable basement complex below the Paleozoic sedimentary rocks. The Paleozoic strata dip east at 25 to 30 feet to the mile. There is no evidence that any of the faults and folds known or surmised to be present acts as a barrier to the movement of ground water. The bedrock surface underlying the Milwaukee-Waukesha area is formed by the Niagara dolomite except in northeastern Milwaukee County, where it is dolomite and shale of the Milwaukee formation of Devonian age, and in some of the preglacial valleys where the uppermost bedrock formation is the Maquoketa shale. Unconsolidated deposits of glacial drift cover the surface of the bedrock almost completely. Buried valleys in the bedrock surface contain as much as 150 feet of water-bearing sand and gravel deposits. These deposits, along with the Niagara dolomite, could be developed as sources of water supplemental to that of the sandstone aquifer. The Niagara dolomite is an important aquifer; it yields water from crevices and solution channels. The sandstone aquifer consists of the Galena dolomite, the Platteville limestone, and the St. Peter sandstone of Ordovician age, and the Eau Claire and Mount Simon sandstones of Cambrian age. The St. Peter and Mount Simon are the most productive formations but the others supply some water to wells. Static water levels in the shallow aquifers have not declined to any great extent except in downtown Milwaukee, where a 50-foot-deep cone of depression exists. Static water levels in the sandstone aquifer declined as much as 350 feet in the Milwaukee area from 1880 through 1950. Recharge to the two shallow aquifers occurs locally from precipitation within the area. The major recharge area of the sandstone aquifer lies about 25 miles west of Wauwatosa. Some ground water is recharged to the sandstone aquifer locally by leakage from the Niagara dolomite, mostly through deep uncased wells. Ground water is the source of six municipal supplies and many industrial and commercial supplies in the area. Pumpage from deep wells has increased from about 2.5 mgd in 1900 to about 25 mgd in 1949, of which 6.0 mgd was derived from the shallow aquifers. The total withdrawal from the shallow aquifers, including the 6.0 mgd from the deep wells, was about 19.5 mgd in 1949. Thus the total in 1949 was 38.5 mgd for the area as a whole. Coefficients of transmissibility and storage for the sandstone aquifer were obtained by means of controlled pumping tests at Wauwatosa, Waukesha, Greendale, Town of Lake, and Jefferson. The coefficients were used to calculate the amount of water recharged from the Niagara dolomite to the sandstone aquifer in the area. About 5.5 mgd of the 23 mgd pumped from deep wells in 1950 was supplied locally by leakage from the Niagara dolomite. The coefficients, with corrections for boundaries, were also applied to past records of pumpage to calculate the water-level decline in the sandstone aquifer at Wauwatosa from 1880 through 1950. The calculated decline was 317 feet, and the actual decline was 307 feet. The future water-level decline in the sandstone aquifer at Wauwatosa resulting from estimated future pumping conditions was computed. If the pumpage in the area as ?. whole increases from about 23 mgd in 1950 to about 28 mgd in 1960, the water levels at Wauwatosa will decline as much as 65 feet more by 1960. It is estimated that the available recharge to the sandstone aquifer underlying the Milwaukee-Waukesha area is approximately 60 mgd. It is recommended that new deep wells be located to the west toward the recharge area and that the shallow aquifers be used as auxiliary sources to void excessive lowering of water levels in the sandstone aquifers. Conservation should be practiced by all users of ground water to avoid waste resulting in lower water levels and higher pumping costs.

Wisconsin↗
USGS2006

Hydrostratigraphic characterization of intergranular and secondary porosity in part of the Cambrian sandstone aquifer system of the cratonic interior of North America: Improving predictability of hydrogeologic properties

The Upper Cambrian interval of strata in the cratonic interior of North America has a long history of inconsistent hydrogeologic classification and a reputation for marked and unpredictable variability in hydraulic properties. We employed a hydrostratigraphic approach that requires hydraulic data to be interpreted within the context of a detailed characterization of the distribution of porosity and permeability to arrive at a better understanding of these rocks. As a first step, we constructed a framework of hydrostratigraphic attributes that is a depiction of the spatial distribution of both rock matrix and secondary porosity, independent of hydraulic data such as pumping-test results. The locations of hundreds of borehole geophysical logs and laboratory measurements of rock sample matrix porosity and permeability were mapped on detailed (mostly 1:100,000 or greater), conventional, lithostratigraphic maps. Stratigraphic cross-sections, based on hundreds of natural gamma logs and thousands of water-well records, have provided a markedly improved depiction of the regional distribution of rock matrix hydrostratigraphic components. Borehole, core and outcrop observations of secondary porosity were also tied to detailed stratigraphic sections and interpolated regionally. As a second step, we compiled and conducted a large number of hydraulic tests (e.g., packer tests and borehole flowmeter logs) and analyzed thousands of specific capacity tests (converted to hydraulic conductivity). Interpretation of these data within the context of the hydrostratigraphic attributes allowed us to produce a new hydrogeologic characterization for this stratigraphic interval and gain important insights into geologic controls on hydraulic variability. There are a number of assumptions in herent in most previous hydrogeologic investigations of these strata, such as equivalency of lithostratigraphic and hydrogeologic units and the dominance of intergranular flow in sandstone, that are not consistent with our results. A particularly important outcome of our study is recognition of regionally extensive bedding-plane fracture clusters. Such exceptionally high hydraulic conductivity features dominate the hydraulics of aquifers and confining units in these siliciclastic-dominated strata, including within intervals consisting largely of friable sandstone with high intergranular conductivity. Furthermore, our results provide some measure of fracture predictability, by correlating their abundance and hydraulic importance to specific stratigraphic positions and particular depths of burial beneath younger bedrock. A discrete, consistent stratigraphic interval of fine-grained siliciclastic beds also is apparently resistant to the development of vertically interconnected fractures, making the location of this regionally extensive confining unit predictable. Our more rigorous approach of interpreting typical hydraulic tests as well as relatively new techniques of borehole flowmeter logging, within the context of a hydrostratigraphic framework, results in improved definition of individual aquifers and confining units. It also enables quantification of their hydraulic properties, which leads to improved prediction of groundwater flow paths and time-of-travel. ?? 2005 Elsevier B.V. All rights reserved.

Sedimentary Geology↗
USGS2021

Groundwater hydrology and chemistry of Jamestown Island, Virginia—Potential effects of tides, storm surges, and sea-level rise on archaeological, cultural, and ecological resources

As the site of the first permanent English settlement in North America in 1607, Jamestown Island, Colonial National Historical Park (COLO), Virginia, contains a rich archaeological record that extends from the Paleoindian period (15,000 to 8,000 years ago) through the 20th century. The island is located on the lower James River near the mouth of Chesapeake Bay. Jamestown Island vegetation is dominated by upland forests surrounded by tidal, freshwater-to-oligohaline marshes. Along the Virginia coast, relative sea-level rise was more than 2.5 times the global average during the 20th century. Consequently, the National Park Service (NPS) has identified COLO as one of the 25 national parks most threatened by climate change. Surface waters across the island are hydraulically connected to the laterally continuous Surficial aquifer. The land-surface altitude of the island is low, with two-thirds of the island less than 5 feet (ft) above the North American Vertical Datum of 1988 (NAVD 88). Consequently, sea-level rise, combined with tides and storm surges, threatens the island and its resources as surface-water and groundwater levels rise, saltwater enters the Surficial aquifer, and groundwater chemistry changes. The impact of sea-level rise on the island’s surface-water resources has been well studied, but groundwater effects have been largely ignored. Quantifying the effects of tides, storm surges, and sea-level rise on groundwater levels and chemistry is essential to developing an effective strategy for managing climate-induced changes. The first step in developing a response strategy includes a parkwide general risk assessment for archaeological sites on the island, so that sites can be prioritized for management actions. The U.S. Geological Survey and the NPS began a study in 2015 to develop a long-term groundwater-monitoring program to evaluate this risk and to develop an updated management strategy. The groundwater-monitoring program consists of 45 wells and piezometers in two individual clusters and three transects across the island in different hydrologic and chemical settings. Samples for water quality were collected from the wells and piezometers from October 2015 through September 2018 at variable time intervals. Results of the monitoring identified disparate hydrologic and chemical responses to saltwater intrusion across the island. Specific conductance (an indicator of salinity) of groundwater beneath several marshes responded differently to changes in James River salinity. Groundwater response to changes in James River specific conductance appeared to be controlled by land-surface altitude and slope, differences in lateral and vertical sediment characteristics, distance from surface waters, and the degree of surface water/groundwater connectivity between channels and the aquifer. Groundwater chemistry data from monitoring wells at Black Point, a low-altitude, upland setting, are in contrast with conditions observed in Island House observation wells, a high-altitude, upland setting. Specific conductance (less than 200 microsiemens per centimeter [μS/cm]) and pH (greater than 5.0) of groundwater beneath much of the uplands that characterize the Island House observation wells are typical of groundwater in noncarbonate sedimentary aquifers recharged by precipitation. At Black Point, specific conductance ranged from 2,490 to 15,200 μS/cm, and pH ranged from 3.1 to 6.6 standard units. At the Black Point observation wells, the most saline and dense water was at the water table rather than deeper in the aquifer, causing a density inversion that persisted throughout the study. The density inversion likely resulted from differences in permeability between the shallow clay and fine-grained sands and the deeper coarse-grained sand and gravel. Groundwater with the lowest pH was at the water table. As saline groundwater flows through organic sediment beneath the marshes, bacterial biodegradation of organic matter creates anoxic conditions. Continued biodegradation concomitantly reduces iron-oxide minerals in the sediment and sulfate in saline water. When oxygen is reintroduced into groundwater, iron and sulfur can reoxidize to form sulfuric acid, locally lowering the pH of the water. This report describes the groundwater monitoring network design, rationale for site selection, monitoring approach, and results of monitoring from October 2015 through September 2018. Maps of inundation at selected water-level altitudes are included to identify the risk to archaeological, cultural, and ecological resources. The monitoring results of the hydrology and chemistry data are interpreted, and the different hydrologic and chemical settings are described. The implications of the study results for management decisions are presented, and suggestions for improving the monitoring network are included.

Virginia↗
USGS2016

Mineral thermometry and fluid inclusion studies of the Pea Ridge iron oxide-apatite–rare earth element deposit, Mesoproterozoic St. Francois Mountains Terrane, southeast Missouri, USA

Mineral thermometry and fluid inclusion studies were conducted on variably altered and mineralized samples from the Mesoproterozoic Pea Ridge iron oxide-apatite (IOA)-rare earth element (REE) deposit in order to constrain P-T conditions, fluid chemistry, and the source of salt and volatiles during early magnetite and later REE mineralization. Scanning electron microscopy (SEM)-cathodoluminescence and SEM-backscatter electron images show that quartz and rutile precipitated before, during, and after magnetite and REE mineral growth. Ti-in-quartz and Zr-in-rutile equilibration temperatures range from ≤350° to 750°C in the amphibole, magnetite, hematite, and silicified zones where T increased during magnetite and quartz growth and dropped precipitously after fracturing and brecciation. Late drusy quartz cements within a REE-rich breccia pipe record the lowest T (≤315°–400°C). Liquid-, vapor-rich, and hypersaline (±hematite, calcite) fluid inclusions are common and liquid CO 2 is present locally. Salinities define three populations: saline (10–27 wt % NaCl equiv), hypersaline (34–>60 wt % NaCl equiv), and dilute (0–10 wt % NaCl equiv ). The wide range of eutectic melting temperatures (−67° to −19°C) suggests that saline inclusions trapped variable proportions of a CaCl-MgCl-FeCl-bearing fluid end member and an NaCl-KCl fluid end member. Homogenization temperatures and pressures of these saline inclusions suggest they were trapped when fluids unmixed into brine and vapor at T <350°C, P <15 MPa, and a depth of ~1.5 km. Hypersaline inclusions were trapped at low T and P (~200°C and ~1 MPa) along the V + L + H curve when the system vented to the paleosurface. Data for dilute inclusions in late drusy quartz from the REE-rich breccia pipe are indicative of a boiling epithermal environment. The Na/Cl, Na/K, and Cl/Br ratios of fluid inclusion extracts provide evidence for mixtures of magmatic hydrothermal fluids and evaporated seawater. Extracts from magnetite, hematite, and pyrite plot in the magmatic-hydrothermal field, indicating that Fe was derived from a magmatic source. Their enrichments in Mg and Ca are consistent with a mafic magmatic source. The positive correlation between Na/Mg and Na/Ca ratios may be due to halite saturation or albitization of igneous rocks. Extracts from barite in the REE-rich breccia pipes are enriched in Na and Br and plot near the seawater evaporation trend. He is highly enriched relative to Ne and Ar in fluid inclusion extracts, which precludes air as a source of He. Although the He is mostly of crustal origin, pyrite with a 3 He/ 4 He (R/R A ) of 0.1 contains up to 12% mantle He. Many extracts have low 20 Ne/ 22 Ne ratios due to nucleogenic production of 22 Ne in high F/O minerals such as fluorapatite or F biotite. The arrays of data for 3 He/ 4 He (R/R A ) and 22 Ne/ 20 Ne suggest that volatiles were derived from two sources, a moderate F mafic magma containing mantle He and a high F silicic magma with crustal He. Together with other evidence cited in this report, these data (1) support a magmatic hydrothermal origin for the Mesoproterozoic magnetite-apatite deposit with ore fluids derived from a concealed mafic to intermediate-composition intrusion, (2) suggest that the REE minerals in breccia pipes were either derived from apatite or precipitated in response to decompression and cooling during breccia pipe formation, (3) provide evidence for the influx of basinal brine, magmatic fluids from granitic intrusions, and meteoric water after breccia pipe formation, and (4) show that Pea Ridge was relatively unaffected by the late Paleozoic Mississippi Valley-type (MVT) Pb-Zn system in overlying Cambrian sedimentary rocks.

Missouri↗
USGS2004

Two stages of deformation and fluid migration in the west-central Brooks Range fold and thrust belt, Northern Alaska

The Brooks Range is a north-directed fold and thrust belt that forms the southern boundary of the North Slope petroleum province in northern Alaska. Field-based studies have long recognized that large-magnitude, thin-skinned folding and thrusting in the Brooks Range occurred during arc-continent collision in the Middle Jurassic to Early Cretaceous (Neocomian). Folds and thrusts, however, also deform middle and Upper Cretaceous strata of the Colville foreland basin and thus record a younger phase of deformation that apatite fission-track data have shown to occur primarily during the early Tertiary (~60 and ~45 Ma). A structural and kinematic model that reconciles these observations is critical to understanding the petroleum system of the Brooks Range fold and thrust belt. New interpretations of outcrop and regional seismic reflection data indicate that from the modern mountain front northward to near the deformation front under the coastal plain, the basal thrust detachment for the orogen is located in the Jurassic and Lower Cretaceous Kingak Shale in the upper part of the regionally extensive, gently south-dipping, north-derived Mississippian to Early Cretaceous Ellesmerian sequence. The frontal part of the orogen lies in middle Cretaceous foreland basin strata and consists of a thin-skinned fold belt at the deformation front and a fully developed passive-roof duplex to the south. Near the mountain front, the orogen is composed of a stacked series of allochthons and thrust duplexes and associated Neocomian syntectonic deposits that are unconformably overlain by proximal foreland basin strata. The foreland basin strata and underlying deformed rocks are truncated by a younger generation of folds and thrusts. Vitrinite reflectance and stable isotope compositions of veins provide evidence of two fluid events in these rocks, including an earlier higher temperature (~250-300&deg;C) event that was buffered by limestone and a younger, lower temperature (~150&deg;C) event that had distinctly lower &delta; 13 C values as a result of oxidation of organic matter and/or methane. Zircon fission-track data from the host rocks of the veins show that the higher temperature fluid event occurred at 160-120 Ma, whereas the lower temperature event probably occurred at about 60-45 Ma. It is proposed that the Brooks Range consists of two superposed contractional orogens that used many of the same mechanically incompetent stratigraphic units (e.g., Kayak Shale, Kingak Shale) as sites of thrust detachment. The older orogen formed in a north-directed arc-continent collisional zone that was active from 160 to 120 Ma. This deformation produced a thin-skinned deformational wedge that is characterized by far-traveled allochthons with relatively low structural relief, because it involved a thin (1-4-km [0.6-2.5-mi]-thick) stratigraphic section. Deeper parts of the deformational wedge are envisioned to have contained relatively high-temperature fluids that presumably migrated from or through limestone-rich source areas in the underlying autochthon or from deeper parts of the orogen. The younger orogen, which formed initially at about 60 Ma and reactivated at 45 Ma, produced a thrust belt and frontal triangle zone with low amounts of shortening and relatively high structural relief, because it involved a structural section 5-10 km (3-6 mi) thick. Fluids associated with this deformation were relatively of lower temperature and suggest that hydrocarbon migration occurred at this time. We conclude that hydrocarbon generation from Triassic and Jurassic source strata and migration into stratigraphic traps occurred primarily by sedimentary burial principally at 100-90 Ma, between the times of the two major episodes of deformation. Subsequent sedimentary burial caused deep stratigraphic traps to become overmature, cracking oil to gas, and initiated some new hydrocarbon generation progressively higher in the section. Structural disruption of the traps in the early Tertiary released sequestered hydrocarbons. The hydrocarbons remigrated into newly formed structural traps, which formed at higher structural levels or were lost to the surface. Because of the generally high maturation of the Colville basin at the time of the deformation and remigration, most of the hydrocarbons available to fill traps were gas.

Alaska↗
USGS1992

Map showing sediment isopachs in the deep-sea basins of the Pacific continental margin, Point Conception to Point Loma

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32&deg; and 49&deg; North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38&deg; latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. index map for I-2089-A See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1992

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Point Conception to Point Loma

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32&deg; and 49&deg; North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38&deg; latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. index map for I-2089-A See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing sediment isopachs in the deep-sea basins of the Pacific continental margin, Cape Mendocino to Point Conception

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32&deg; and 49&deg; North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38&deg; latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Cape Mendocino to Point Conception

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32&deg; and 49&deg; North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38&deg; latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing sediment isopachs in the deep-sea basins of the Pacific Continental Margin, Strait of Juan de Fuca to Cape Mendocino

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32&deg; and 49&deg; North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38&deg; latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1993

Map showing depth to basement in the deep-sea basins of the Pacific continental margin, Strait of Juan de Fuca to Cape Mendocino

The U.S. Geological Survey conducted a series of cruises, EEZSCAN 84 (EEZ-SCAN 84 Scientific Staff, 1986), to collect reconnaissance data on the newly proclaimed Exclusive Economic Zone (EEZ), the area out to 200 nautical miles from the coastline of the United States. The cruises systematically surveyed the entire conterminous United States west coast EEZ using the Geological Long-Range Inclined Asdic (GLORIA) side-scan sonar, a 160-in 3 airgun seismic-reflection profiler, a 3.5-kHz high-resolution seismic-reflection profiler, a 10-kHz echo sounder, and a proton-precession magnetometer. The nominal trackline spacing throughout the survey was 30 km. Derivative maps of sediment thickness (I-2089-A, I-2090-A, I-2091-A) and depth to basement (I-2089-B, I-2090-B, I-2091-B) in the basins of the west coast EEZ were compiled from both the sonar-image dala and the deep-penetration seismic data obtained on these cruises. Only EEZ-SCAN 84 data were used for the map compilations because available data from other cruises in this region are sparsely located, have poor navigational control, or were obtained with seismic systems that were not powerful enough to resolve oceanic basement. For this map series, sediment thickness and depth to basement were determined only in the deep-ocean basin regions because the seismic system used on the EEZ-SCAN 84 cruises could not resolve oceanic basement beneath the thick sediments of the continental slope. All the data used to compile the maps are presented in the "Atlas of the Exclusive Economic Zone, Western Conterminous United States" (EEZ-SCAN 84 Scientific Staff, 1986). Basement Outcrops GLORIA imagery was used to locate areas of basement outcrop throughout the region. Where possible, sediment thickness on and immediately adjacent to basement outcrops was measured from seismic data. Where there was no bathymetric or seismic control, a seamount peak was assumed to have no sediment cover. A pattern is used on the map to indicate all basement outcrops. Data Reduction Acoustic basement in the basins, invariably oceanic Layer 2, was observed on all of the seismic records. One-way traveltime was measured from the sea floor to acoustic basement. Because the trackline spacing of about 30 km is relatively large compared to the data density along track, we chose to measure the sediment thickness every 0.5 hour or at an interval of approximately 7.5 km. Water depth was measured with a 10-kHz profiler. Depth to basement was calculated using the sea surface as the zero datum and adding the corrected water depth (Carter, 1980) to the sediment thickness. Acoustic travel times were converted to depths by first calculating a regression equation from the interval velocity versus depth data of Connard and others (1984). Their data base comprises a compilation of all available Deep Sea Drilling Project data plus wide-angle refraction data, which were collected in Cascadia Basin west of Oregon and represents the best data set available for the United States west coast EEZ. The regression equation was integrated to determine sediment thickness as a function of one-way traveltime . The resulting equation is z = 1400t + 0 .5t 2 where z is sediment thickness in meters, and t is one-way traveltime in seconds. Sediment thicknesses calculated using this equation were compared to values calculated from the general equation of Carlson and others (1986). Values for sediment thickness calculated by the two equations differed by no greater than 10 percent throughout the range of travel times. Bathymetry The bathymetry is from Chase and others (1981). The bathymetric data were compiled from a variety of sources, and data quality is inconsistent. Because of differences in navigational precision and density of coverage, the bathymetric contours of a feature may be at a different location than the corresponding isopleths derived from the EEZ-SCAN 84 data, or a feature may not be indicated on the bathymetry at all. These situations occur because either the feature is poorly located in the bathymetric data set or, especially in the outer EEZ, the bathymetric data are too sparse to have defined the existence of a feature. Acknowledgments Topographic digital data bases were corrected and verified by Christina Lief. Gerald Evenden developed the computer software system MAPGEN, used to compose this map. Reviews, suggestions, and technical contributions from Edward C. Escowitz and Florence Wong and advice about cartographic design from Will Stettner substantially improved the quality of this map. References Cited Carlson, R.L., Gangi, A.F., and Snow, K.R., 1986, Empirical reflection-traveltime/ depth and velocity/depth functions for the deep-sea sediment column: Journal of Geophysical Research, v. 91, no. B8, p. 8249-8266. Carter, D.J.T., 1980, Echo-sounding correction tables: Taunton, United Kingdom, Hydrographic Department, Ministry of Defence, 150 p. Chase, T.E., Wilde, Pat, Normark, W.R, Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32&deg; and 49&deg; North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38&deg; latitude, 2 sheets. Connard, G., Couch, R., Keeling , K., Roy, J., and Troseth, S., 1984, Abyssal plain and continental net-objective sedimentary thicknesses, in Kulm, L.D., and others, eds., Western North America continental margin and adjacent ocean floor off Oregon and Washington, Atlas 1 of Regional Atlas Series, Ocean Margin Drilling Program: Woods Hole, Mass., Marine Science International, sheet 7. EEZ-SCAN 84 Scientific Staff, 1986, Atlas of the Exclusive Economic Zone, Western Conterminous United States: U.S. Geological Survey Miscellaneous Investigations Series I-1792, scale 1:500,000, 152 p. See Also "U.S. Pacific West Coast Field Activities" (Paskevich and others, 2011; http://pubs.usgs.gov/of/2010/1332/htmldocs/pc/pc_overview.html). Paskevich, V.F., Wong, F.L., O?Malley, J.J., Stevenson, A.J., and Gutmacher, C.E., 2011, GLORIA sidescan-sonar imagery for parts of the U.S. Exclusive Economic Zone and adjacent areas: U.S. Geological Survey Open-File Report 2010?1332, available at http://pubs.usgs.gov/of/2010/1332/.

IMAP↗
USGS1973

Erosional and Depositional Aspects of Hurricane Camille in Virginia, 1969

Probably the worst natural disaster in central Virginia's recorded history was the flood resuiting from an 8-hour deluge of about 28 inches (710 mm) of rain on the night of August 19-20, 1969. This study examines some of the intensive sediment erosion and deposition that resulted from the storm and flood. Most of the 150 people whom the flood killed in this mountainous area died from broken bones and other blunt-force injuries, rather than by drowning. The transport of sediment and other debris by the water therefore was very significant in loss of life and in property damage. Erosion resulted mainly from debris avalanches down the mountain-sides and channel scour along streams and head-water tributaries. Total amounts of sediment yield from certain mountainous areas in Nelson County were about 3.2-4.6 million cubic feet per square mile, probably the equivalent of several thousand years of normal denudation. Characteristics of the debris avalanches were that (1) they usually followed pre-existing depressions on hillsides and occurred on slopes greater than 35 percent, (2) the upslope tip of the avalanche scar tended to be located at the steepest part of the hillside, where the convex slope merged with the concave or planar zone immediately below, (3) hillsides facing north, northeast and east were more susceptible to avalanching than slopes facing other directions, and (4) debris-avalanches caused rapid and devastating surges of water and sediment in the mountain-stream channels. Such surges in some instances temporarily blocked the channel flow upstream. Slightly more than half of the total sediment contributed to the stream system was from erosion of stream channels. Channel erosion was very irregularly distributed; some ravines 10-20 feet wide and 5-10 feet deep were scoured in places which formerly had only a very small channel, whereas other channels only a few hundred yards away experienced little or no channel erosion. By the use of figures for the total amount of sediment removed from a drainage basin and the duration of the storm, estimates were made of the storm-average sediment-transport rate at the mouth of various basins. For drainage basins ranging up to about 1.5 square miles, the estimated storm-average sediment-transport rates varied from practically nothing to as much as 172,000 pounds per second (7.4 million tons per day). The types of sediment deposits were (1) debris-avalanche deposits, rather rare, at the base of hillslopes, (2) mountain-stream channel deposits, usually in scattered sediment patches but locally occurring as large wedge-shaped deposits behind debris dams, (3) alluvial fans, (4) delta-like deposits at the junction of a stream and major highway, where water backed up during the flood due to plugging of a culvert, and (5) accretion deposits on flood plains. The highway deltas and some downstream flood-plain sediments consisted mostly of sand-sized grains, but the other types of deposits usually contained particles ranging from silt or clay to boulders 5-10 feet in diameter. Changes in grain size and in volume of deposition with distance downstream were measured, and sedimentary features of the various types of deposits are described.

Professional Paper↗
USGS1964

Ground-water conditions in the Green Bay area, Wisconsin, 1950-60

The Green Bay area, which includes parts of Brown, Outagamie, and Shawano Counties, has an area of about 525 square miles in eastern Wisconsin at the south end of Green Bay. In 1960, it had a population estimated at 124,000; Green Bay, the largest city in the area, had a population of 62,888. The Green Bay area is underlain by a basement complex of crystalline rocks of Precambrian age. Sedimentary rocks of Cambrian, Ordovician, and Silurian ages overlie the crystalline rocks. These rocks are divided, in ascending order, as follows: The Dresbach Group, Franconia Sandstone, and Trempealeau Formation of Cambrian age; the Prairie du Chien Group, St. Peter Sandstone, Platteville Formation, and Maquoketa Shale of Ordovician age; and the Niagara Dolomite of Silurian age. The Maquoketa Shale and Niagara Dolomite are present only in the eastern part of the area. Unconsolidated deposits, largely of Pleistocene age and glacial origin, overlie the older rocks in most of the area. The rocks of the Dresbach Group, Franconia Sandstone, Trempealeau Formation, Prairie du Chien Group, and St. Peter Sandstone are connected hydraulically and can be considered to form one aquifer, called the sandstone aquifer. The sandstone aquifer is the principal source of ground-water supply in the Green Bay area and is one of the most productive water-bearing units in Wisconsin. All the public water supplies in the area, except the supply for the city of Green Bay, and many of the industrial water supplies are obtained from wells tapping the sandstone aquifer. Rates of discharge of individual wells range from about 200 to 1,000 gallous per minute. The city of Green Bay also obtained its water supply from wells tapping the sandstone aquifer until August 1957, when it began using Lake Michigan as a source of water supply. Several industries also use large quantities of surface water. The Niagara Dolomite, although largely undeveloped, is potentially an important aquifer, in the eastern part of the area. Small amounts of water are obtained from dolomite of the Platteville Formation and from sand and gravel deposits of Pleistocene age. Recharge to the sandstone aquifer in the Green Bay area is derived chiefly from precipitation that infiltrates at or near the outcrop area of the aquifer in northwestern Brown County, eastern Outagamie and Shawano Counties, and southern Oconto County. The amount of recharge is estimated to be at least 30 mgd (million gallons per day). Withdrawals of water from wells tapping the sandstone aquifer in the area began when the first well was drilled in 1886. The withdrawals gradually increased to an average of about 6 mgd in 1940, about 10 mgd in 1950, and about 13 mgd in January-July of 1957, after which time the city of Green Bay discontinued pumping from wells. From August 1957 through 1960, average annual withdrawals of water remained relatively constant at about 5 mgd. Water levels in wells tapping the sandstone aquifer persistently declined until August 1957 as a result of the gradually increasing withdrawals of water. In the area of concentrated ground-water withdrawals in downtown Green Bay, the piezometric surface, which had been about 100 feet above land surface in 1886, was about 340 feet below land surface in 1957. The cessation of pumping by the city of Green Bay in August 1957 resulted in a decrease in withdrawals of ground water from about 13.1 mgd in the first half of 1957 to about 5.3 mgd in the last half and a rapid recovery in water levels. ]n the area of concentrated withdrawals, the piezometric surface had recovered about 300 feet by September 1960. Rises in water levels were recorded throughout the Green Bay area, with the amount of the rise depending on the distance from the Green Bay city wells. In September 1960, water levels appeared to be affected more by local variations in the rates of pumping than by the recovery resulting from 1957 reduction in pumping. Much additional ground water could

Wisconsin↗
USGS2006

Hydrogeologic framework refinement, ground-water flow and storage, water-chemistry analyses, and water-budget components of the Yuma area, southwestern Arizona and southeastern California

The ground-water and surface-water system in the Yuma area in southwestern Arizona and southeastern California is managed intensely to meet water-delivery requirements of customers in the United States, to manage high ground-water levels in the valleys, and to maintain treaty-mandated water-quality and quantity requirements of Mexico. The following components in this report, which were identified to be useful in the development of a ground-water management model, are: (1) refinement of the hydrogeologic framework; (2) updated water-level maps, general ground-water flow patterns, and an estimate of the amount of ground water stored in the mound under Yuma Mesa; (3) review and documentation of the ground-water budget calculated by the Bureau of Reclamation, U.S. Department of the Interior (Reclamation); and (4) water-chemistry characterization to identify the spatial distribution of water quality, information on sources and ages of ground water, and information about the productive-interval depths of the aquifer. A refined three-dimensional digital hydrogeologic framework model includes the following hydrogeologic units from bottom to top: (1) the effective hydrologic basement of the basin aquifer, which includes the Pliocene Bouse Formation, Tertiary volcanic and sedimentary rocks, and pre-Tertiary metamorphic and plutonic rocks; (2) undifferentiated lower units to represent the Pliocene transition zone and wedge zone; (3) coarse-gravel unit; (4) lower, middle, and upper basin fill to represent the upper, fine-grained zone between the top of the coarse-gravel unit and the land surface; and (5) clay A and clay B. Data for the refined model includes digital elevation models, borehole lithology data, geophysical data, and structural data to represent the geometry of the hydrogeologic units. The top surface of the coarse-gravel unit, defined by using borehole and geophysical data, varies similarly to terraces resulting from the down cutting of the Colorado River. Clay A is nearly the same as the previous conceptual hydrogeologic model definition (Olmsted and others, 1973), except for a minor westward extension from the city of Yuma. Clay B is extended to the southerly international boundary and increased in areal extent by about two-thirds of the original extent (Olmsted and others, 1973). The other hydrogeologic units generally are the same as in the previous conceptual hydrogeologic model. Before development, the Colorado and Gila Rivers were the sources of nearly all the ground water in the Yuma area through direct infiltration of water from river channels and annual overbank flooding. After construction of upstream reservoirs and clearing and irrigation of the floodplains, the rivers now act as drains for the ground water. Ground-water levels in most of the Yuma area are higher now than they were in predevelopment time. A general gradient of ground-water flow toward the natural discharge area south of the Yuma area still exists, but many other changes in flow are evident. Ground water in Yuma Valley once flowed away from the Colorado River, but now has a component of flow towards the river and Mexicali Valley. A ground-water mound has formed under Yuma Mesa from long-term surface-water irrigation; about 600,000 to 800,000 acre-ft of water are stored in the mound. Ground-water withdrawals adjacent to the southerly international boundary have resulted in water-level declines in that area. The reviewed and documented water budget includes the following components: (1) recharge in irrigated areas, (2) evapotranspiration by irrigated crops and phreatophytes, (3) ground-water return flow to the Colorado River, and (4) ground-water withdrawals (including those in Mexicali Valley). Recharge components were calculated by subtracting the amount of water used by crops from the amount of water delivered. Evapotranspiration rates were calculated on the basis of established methods, thus were appropriate for input to the ground-water flow model developed by the Bureau of Reclamation (William Greer, hydrologist, Bureau of Reclamation, written commun., 2005). Evapotranspiration by crops and phreatophytes were calculated by using crop coefficient methods and meteorological data. Other methods of calculating evapotranspiration rates by using combinations of satellite imagery and ground-based data could be used for higher spatial and temporal resolution. Ground-water return flow during years of low flow on the Colorado River (1972–82, 1987–92, and 1994–96) averaged 79,000 acre-ft per year. Ground-water withdrawal data for 1970–99 were similar to other estimates made by the U.S. Geological Survey for the Yuma area. New water-chemistry data were collected in 12 wells and 8 canals/drains to characterize spatial patterns in chemical constituents, determine isotopic ages of water, infer possible sources of ground water, and locate the vertical intervals of the aquifer that contribute most water to wells. Depth-dependent samples were collected at one of the wells (YM-10). A large quantity of water-quality data were compiled from Bureau of Reclamation and U.S. Geological Survey records and merged into the U.S. Geological Survey National Water Information System database. New samples were analyzed for major ions, nutrients, stable isotopes of oxygen and hydrogen, tritium ( 3 H), and carbon-14 ( 14 C) (along with C 13 /C 12 ratios). Light values of oxygen-18 ( 18 O) and deuterium ( 2 H, D) in well 242-2 indicate recharge from the Colorado River. Heavy water samples from wells 242-22, CADC, and Mesa del Sol indicate local recharge sources. Tritium data indicate there is young water in wells in the valleys and near the edge of Yuma Mesa, while older water is found far from the Colorado River. 14 C data indicate that water from wells near the southerly international boundary is at least several thousand years old.

Arizona, California↗
USGS1979

Water resources of the southern Powder River area of southeastern Montana

The southern Powder River area comprises about 2,230 square miles in southeastern Montana. Sedimentary rocks beneath this area range in age from Cambrian to Holocene and attain a maximum thickness of about 12,000 feet. Rocks exposed in the study area range in age from Late Cretaceous to Holocene. Water for domestic, stock, and public use in the southern Powder River area is available from the Fox Hills-lower Hell Creek aquifer and the upper part of the Hell Creek Formation, both of Late Cretaceous age, and the Fort Union Formation of Paleocene age. Water for industrial use might be available from the Madison Group of Mississippian age. Where adequate quantities are available, water from the Madison Group is suitable for irrigation. Water from alluvium of Holocene and Pleistocene age along the Powder River is marginally suitable for irrigation, and surface water from the Powder River is suitable for irrigation, except during periods of low flow. The Madison Group is a sequence of carbonate rocks that underlies the entire study area and ranges in thickness from 800 to 1,500 feet. Depth to the top of the group is about 4,000 feet in the southeastern part of the area and as much as 9,000 feet in the southwestern part. Water-supply wells at the Bell Creek oil field in the southeastern part of the study area flow as much as 1,300 gal/min (gallons per minute). Oil-field water from this area contains calcium, magnesium, and sulfate as major ions, and contains less than 1,000 mg/L (milligrams per liter) dissolved solids. The Fox Hills-lower Hell Creek aquifer is predominantly sandstone interbedded in part with sandy shale and siltstone. The aquifer crops out in the eastern part of the study area and dips generally westward beneath the land surface at about 40 to 200 feet per mile. Wells in the Fox Hills-lower Hell Creek aquifer range in depth from 25 feet in the outcrop area to 1,358 feet between the Powder and Little Powder Rivers. Measured well yields range from 3 to 200 gal/min. Many flowing wells along the principal rivers yield as much as 20 gal/min. The water contains calcium, magnesium, and bicarbonate or sulfate as major ions in the outcrop area. Downgradient, sodium and bicarbonate are predominant. The dissolved-solids concentration ranges from 261 to 2,230 mg/L. The upper part of the Hell Creek Formation consists of interbedded shale, siltstone, claystone, and sandstone. Wells in the upper part of the Hell Creek are as deep as 1,045 feet. Flowing wells along the Powder and Little Powder Rivers yield as much as 40 gal/min, but pumped wells generally yield less. The water quality is similar to that of the Fox Hills-lower Hell Creek aquifer. The dissolved-solids concentration ranges from 236 to 1,580 mg/L. The Fort Union Formation consists of interbedded sandstone, siltstone, shale, and coal. The formation crops out in the western three-fourths of the study area and is about 2,100 feet thick in the southwestern part. Wells tapping this unit range in depth from 120 to 1,100 feet. Wells and springs are reported to yield as much as 20 gal/min; many wells flow. The upper part of the formation is a major aquifer west of the Powder River valley. The water contains calcium, magnesium, sodium, bicarbonate, and sulfate as the major ions in most any relative proportion. The dissolved-solids concentration ranges from 541 to 2,160 mg/L. Alluvium is unconsolidated deposits of interbedded clay, silt, sand, and gravel, mostly along the river valleys. Maximum measured thicknesses of these deposits were 62 and 55 feet along the Powder and Little Powder Rivers, respectively. Several irrigation wells drilled in the alluvium along the Powder River have reported yields of as much as 900 gal/min. Water contains calcium, magnesium, and sulfate as major ions. The dissolved-solids concentration of two water samples from the Powder River valley was 1,780 and 2,240 mg/L. The only perennial streams are the Powder and Little Powder Rivers. Based on available streamflow records, the mean-annual discharge of the Powder River at Moorhead, in the southwestern part of the area, is 448 cubic feet per second; discharge varies from 0 to 23,000 cubic feet per second. Mean-annual discharge of the Little Powder River near Broadus, in the north-central part of the area, is 31 cubic feet per second; discharge varies from 0 to 2,440 cubic feet per second. Water from the Powder River normally contains calcium and sulfate as the major ions. Dissolved-solids concentration ranges from 20 to 3,460 mg/L.

Montana↗
USGS2004

Holocene reef accretion: southwest Molokai, Hawaii, U.S.A.

Two reef systems off south Molokai, Hale O Lono and Hikauhi (separated by only 10 km), show strong and fundamental differences in modern ecosystem structure and Holocene accretion history that reflect the influence of wave-induced near-bed shear stresses on reef development in Hawaii. Both sites are exposed to similar impacts from south, Kona, and trade-wind swell. However, the Hale O Lono site is exposed to north swell and the Hikuahi site is not. As a result, the reef at Hale O Lono records no late Holocene net accretion while the reef at Hikauhi records consistent and robust accretion over late Holocene time. Analysis and dating of 24 cores from Hale O Lono and Hikauhi reveal the presence of five major lithofacies that reflect paleo-environmental conditions. In order of decreasing depositional energy they are: (1) coral-algal bindstone; (2) mixed skeletal rudstone; (3) massive coral framestone; (4) unconsolidated floatstone; and (5) branching coral framestone-bafflestone. At Hale O Lono, 10 cores document a backstepping reef ranging from ∼ 8,100 cal yr BP (offshore) to ∼ 4,800 cal yr BP (nearshore). A depauperate community of modern coral diminishes shoreward and seaward of ∼ 15 m depth due to wave energy, disrupted recruitment activities, and physical abrasion. Evidence suggests a change from conditions conducive to accretion during the early Holocene to conditions detrimental to accretion in the late Holocene. Reef structure at Hikauhi, reconstructed from 14 cores, reveals a thick, rapidly accreting and young reef (maximum age ∼ 900 cal yr BP). Living coral cover on this reef increases seaward with distance from the reef crest but terminates at a depth of ∼ 20 m where the reef ends in a large sand field. The primary limitation on vertical reef growth is accommodation space under wave base, not recruitment activities or energy conditions. Interpretations of cored lithofacies suggest that modern reef growth on the southwest corner of Molokai, and by extension across Hawaii in general, is controlled by wave-induced near-bed shear stress related to refracted North Pacific swell. Holocene accretion patterns here also reflect the long-term influence of wave-induced near-bed shear stress from north swell during late Holocene time. This finding is consistent with other studies (e.g., Grigg 1998; Cabioch et al. 1999) that reflect the dominance of swell energy and sea level in controlling modern and late Holocene accretion elsewhere in Hawaii and across the Pacific and Indian oceans. Notably, however, this result is refined and clarified for Hawaii in the hypothesis of Rooney et al. (2003) stating that enhancement of the El Niño Southern Oscillation beginning approximately 5000 years ago led to increased north swell energy and signaled the end to net accretion along exposed coastlines in Hawaii. The exposure of Hale O Lono to north swell and the age of sea floor there (ca. 4,800 cal yr BP), coupled with the lack of north swell incidence at Hikauhi and the continuous accretion that has occurred there over the last millennium, strongly supports the ENSO reef hypothesis as outlined by Rooney et al. (2003). Other factors controlling Holocene reef accretion at the study site are relative sea-level position and rate of rise, and wave sheltering by Laau Point. Habitat suitable for reef accretion on the southwest shore of Molokai has shrunk throughout the Holocene.

Hawai'i↗
USGS1992

Hydrogeology of the Cambrian-Ordovician aquifer system in the northern Midwest, United States with a section on ground-water quality

The Cambrian-Ordovician aquifer system contains the most extensive and continuous aquifers in the northern Midwest of the United States. It is the source of water for many municipalities, industries, and rural water users. Since the beginning of ground-water development from the aquifer system in the late 1800's, hydraulic heads have declined hundreds of feet in the heavily pumped Chicago-Milwaukee area and somewhat less in other metropolitan areas. The U.S. Geological Survey has completed a regional assessment of this aquifer system within a 161,000-square-mile area encompassing northern Illinois, northwestern Indiana, Iowa, southeastern Minnesota, northern Missouri, and Wisconsin. Consolidated sedimentary rocks in the northern Midwest range in age from Precambrian to Cretaceous and crop out in generally concentric, arcuate patterns, dipping away from structural highs (arches) on the Precambrian basement in northern Minnesota and Wisconsin toward structural lows (basins) to the south and east. The sedimentary bedrock is generally overlain by a veneer of glacial drift. Thickness of the sedimentary sequence increases to about 5,000 feet in the Forest City basin of southwestern Iowa and to about 14,000 and more than 15,000 feet in the Illinois and Michigan basins, respectively. Cambrian and Ordovician age rocks, mainly marine sandstone and carbonate rocks, compose much of the sedimentary sequence and form the Cambrian-Ordovician aquifer system. The aquifer system lies on the Precambrian basement, regarded as a regional confining unit. Six hydrogeologic units are defined; they are arranged as alternating pairs of an aquifer and an overlying confining. unit. The units are named using the predominant geologic nomenclature of the upper Mississippi Valley, which includes most of the study area. In the southern quarter of the area, the hydrogeologic units consist of equivalent formations of the Ozark area (mostly carbonate rocks). The uppermost part of the aquifer system is the Maquoketa confining unit, which consists of the Maquoketa Shale and the underlying dolomite and shale of the Galena Dolomite and the Decorah, Platteville, and Glenwood Formations. The underlying St. Peter-Prairie du Chien-Jordan aquifer is an important source of ground water in the western part of the area in Iowa and Minnesota, where the uniform Jordan Sandstone is hydraulically connected to overlying fractured dolomite of the Prairie du Chien Group. The unit is less important in the eastern part of Wisconsin and Illinois because the Jordan Sandstone is absent and the Prairie du Chien Group is thin or absent due to pre-St. Peter Sandstone erosion. Equivalent rocks in northern Missouri-the Roubidoux Formation and the Gasconade and Eminence Dolomites-are mainly carbonate rocks that are somewhat permeable and contain some sandstone. The St. Lawrence and Franconia Formations underlying the St. Peter-Prairie du Chien-Jordan aquifer consist generally of silty and shaly, fine-grained, poorly sorted, and dolomitic sandstones that restrict vertical movement of ground water and form a regional confining unit. In the southern and eastern parts of the area, the Potosi and Derby-Doerun Dolomites and the upper part of the Davis Formation are the equivalent rocks (mainly carbonate rocks). In the east-central part of the area in Illinois and Wisconsin, the Ironton-Galesville aquifer forms the most important aquifer of the Cambrian-Ordovician aquifer system, contributing about one-third of the yield from wells in the aquifer system in the Chicago area. The aquifer terminates to the west, south, and east, where the sandstones grade into less permeable carbonate rocks in central Iowa, central Illinois, and northwestern Indiana, respectively. The underlying Eau Claire Formation and its partial equivalent to the southwest, the Bonneterre Formation, form an important confining unit above the Mount Simon aquifer throughout much of the study area. Siltstone and shale are fairly common in the upper part of the Eau Claire Formation but less so in its northernmost extent in Wisconsin. Dolomite content increases southward and westward, where a middle dolomite facies grades laterally into the Bonneterre in Missouri, southwestern Minnesota, extreme south-central Wisconsin, and possibly in western Iowa. The basal unit in the Cambrian-Ordovician aquifer system, the Mount Simon aquifer, is present throughout the study area, except where it is absent over local highs of the Precambrian basement. It consists primarily of the Mount Simon Sandstone in the north and its equivalent in northern Missouri, the Lamotte Sandstone. The underlying Hinckley Sandstone of Precambrian age is included in Minnesota, as is the overlying Elmhurst Sandstone Member of the Eau Claire Formation in northern Illinois. The aquifer increases greatly in thickness and the water is progressively more saline away from the northern structural highs toward the basins. Much of the movement and discharge of ground water in the northern Midwest occurs in local, unconfined, shallow flow systems within a few miles of points of recharge. The rest of the water is semiconfined or confined in intermediate or regional flow systems within the bedrock, where flow is deeper, slower, and traverses much longer distances from recharge areas to discharge areas. The major areas of recharge to regional confined flow are in northwestern Iowa, southeastern Minnesota, western, southern, and eastern Wisconsin, and northern Illinois. Although the rate of flow is small, significant recharge to the Cambrian-Ordovician aquifer system also occurs as leakage through the Maquoketa confining unit, where the vertical hydraulic gradient is downward. Ground water in much of the confined aquifer system moves laterally from recharge areas toward the major river valleys and Lake Michigan or down dip toward the structural basins. The longest flow paths extend as much as 400 miles from northwestern Iowa southeast toward the Illinois basin or to the Mississippi River and Missouri River valleys near their confluence. Other major confined flow is from eastern Wisconsin toward the Michigan basin and southward flow from northeastern Illinois toward the Illinois basin. Regional ground-water discharge from the aquifer system is mainly diffuse upward leakage from confined aquifers along flow paths toward the structural basins. Very saline water around and brines within the basins restrict regional flow into the basins, forcing ground water to discharge upward. Water in intermediate flow systems discharges upward to the major river valleys. Original heads of more than 100 feet above land surface were recorded in the aquifer system near Lake Michigan in eastern Wisconsin and at Dubuque, Iowa, along the Mississippi River. The Cambrian-Ordovician aquifer system was developed rapidly in the late 1800's after the first deep well was drilled in Chicago in 1864. Many flowing wells were not controlled, which caused water levels in deep wells to decline, and many no longer flowed by the early 1900's. Heads in the aquifers have declined very little in most of the recharge or unconfined areas since ground-water withdrawal began, but major declines have occurred in confined areas. The largest declines in head are at Chicago, Illinois, Milwaukee and Green Bay, Wisconsin, and Mason City, Iowa, where the aquifer system is confined by the Maquoketa confining unit. The composite head in the aquifer system declined more than 900 feet in the deepest cones of depression in the Chicago area from 1864 to 1980 and about 375 feet in the cone at Milwaukee from 1880 to 1980. More than 200 feet of decline has occurred at Mason City. The head declined as much as 440 feet in Green Bay from 1886 to 1957, when the city discontinued use of its deep wells and began using water from Lake Michigan. The largest centers of pumping are in the Chicago and Twin Cities (Minneapolis-St. Paul, Minnesota) metropolitan areas about 180 million gallons per day each in 1980. Pumpage exceeded 10 million gallons per day in only a few other areas in 1980. Ground water in the Cambrian-Ordovician aquifer system in the northern Midwest is characterized by an extreme range of mineralization, but its quality in most of the area is good. The major cations are calcium, magnesium, and sodium, and the major anions are bicarbonate, sulfate, and chloride. Sodium, sulfate, and chloride distributions are closely related to the distribution pattern of dissolved solids but not in the same proportion. Dissolved-solids concentration is generally less than 1,000 milligrams per liter in the recharge areas of Wisconsin, southern Minnesota, northeastern Iowa, and north-central Illinois where the aquifer system crops out or subcrops beneath glacial drift. Ground water there is the Ca-Mg-HC03 type, derived from and identical to that in the overlying glacial drift. In northwestern Iowa and southwestern Minnesota, the water in both the glacial drift and the Cambrian-Ordovician aquifer system is a Ca-Na-S04HC03 type, derived from oxidation of pyrite in the overlying Cretaceous Dakota Formation. Transition to higher dissolved solids in the confined areas commonly is accompanied by increased sulfate concentration and&middot; the occurrence of Ca-Na-S04-type water. Salinity of the ground water increases progressively toward the .basins, where dissolved solids exceed 200,000 milligrams per liter. Saline water is present in the Mount Simon aquifer near Lake Michigan in eastern Wisconsin and northeastern Illinois but occurs in successively younger rocks to the east and south as they dip toward the basins. Similarly, salinity increases down dip in Iowa to the southwest and south; however, regional ground-water flow in Iowa is from northwest to southeast. Much of the ground water in the confined aquifer system is isotopically depleted in 0180 and OD with respect to modern precipitation-an indication that the water originated as precipitation in a much colder climate than the present and probably was derived from recharge of glacial meltwater. On the basis of o34S values for sulfur in sulfate, it is believed that isostatic loading from glacial ice over the Michigan basin reversed the hydraulic gradient to trend westward, opposite from the present gradient, causing saline water in the Michigan basin to discharge westward through the present recharge areas. Natural water-quality problems in the Cambrian-Ordovician aquifer system are mainly the high dissolved-solids concentrations and associated high concentrations of sulfate and chloride, which limit the use of the water for municipal and domestic purposes in much of the confined aquifer system in central and southern Illinois, Indiana, southern and western Iowa, and northern Missouri. Another concern is that radium activity exceeds normal background concentrations of a few picocuries per liter in much of the confined aquifer system in eastern Wisconsin, northeastern Illinois, and central Iowa. Other common problems are high hardness and locally excessive concentrations of iron and hydrogen sulfide.

Iowa, Illinois, Indiana, Michigan, Minnesota, Miss↗
USGS1946

Geology and ground-water resources of the island of Hawaii

Hawaii, the largest island in the Hawaiian group, is 93 miles long, 76 miles wide, and covers 4,030 square miles. Mauna Loa Volcano is 13,680 feet high and Mauna Kea is 13,784 feet high. Plate 1 shows the geology, wells, springs, and water-development tunnels. Plate 2 is a map and description of points of geologic interest along the main highways. Plate 3 (same sheet as plate 2) shows highways and points of geologic interest in Hawaii National Park area. The volcanic terms used in the report are defined. Hawaii was built by five volcanoes. All the rocks are volcanic, except for minor amounts of sedimentary rock derived from them. Mauna Loa and Kilauea volcanoes erupt often; Hualalai Volcano last erupted in 1801; Mauna Kea has had Recent but no historic eruptions; Kohala Mountain has long been extinct. Kohala Mountain constitutes the northern end of the island. It is built largely of rocks of the Pololu volcanic series which are dominantly olivine basalt with a few thin intercalated beds of vitric basaltic ash. After the eruption of this series, Kohala Volcano was deeply eroded on the windward (northeastern) side, and a deep soil formed on its other slopes. Later, oligoclase andesite and trachyte lava flows, named the Hawi volcanic series, were erupted. They rest on soil at the top of the Pololu series, and lie in the valleys cut into the Pololu lavas on the windward slope. Both the Pololu and Hawi volcanics were erupted from three rift zones trending N. 35&deg; W., S. 65&deg; E., and S. 50&deg; W. from the summit of the mountain. The rift zones are marked at the surface by rows or cinder cones, and beneath the surface by innumerable dikes. A caldera occupied the summit of the mountain at the beginning of the eruption of the Hawi lavas, and for a time confined the flows. It was gradually filled and the lava escaped northeastward into the large valleys. Some of the caldera faults can still be traced. A shallow graben indents the summit now. South of Kohala Mountain lies the much larger volcano of Mauna Kea. The early rocks of Mauna Kea constitute the Hamakua volcanic series. The lower member of this series consists chiefly of olivine basalt flows with intercalated thin beds of vitric basaltic ash. The olivine basalt of the lower member changes gradationally into the upper member, in which basalt and olivine basalt arc still abundant, but andesite also is present. Lavas of the upper member interfinger with Hawi lavas of Kohala Mountain. The Hamakua volcanic series is mantled with Pahala ash 5 to 20 feet thick, above which lie the rocks of the Laupahoehoe volcanic series. Locally the two series are separated by erosional unconformity, The Laupahoehoe lavas are dominantly andesite. The andesites erupted after the last glacial epoch are mapped separately on plate 1. The Laupahoehoe volcanic series, and probably also the Hamakua volcanic series, were erupted principally from three rift zones, trending west, northeast and south-southeast from the summit of the mountain. The upper slopes are studded with many large cinder cones, lying principally along the rift zones. Late in its geologic history, Mauna Kea was capped by a small glacier, presumably contemporaneous with the Wisconsin stage of glaciation in North America, which left conspicuous terminal, lateral, and ground moraines. Deposits exposed in canyons on the southern slope, formerly believed to be of glacial origin, are now believed to be volcanic explosion breccias. The main bulk of Hualalai Volcano is built of basalts of the Hualalai volcanic series. One flow of andesite has been found. The cinder and spatter cones lie principally along three rift zones which trend northwest, north, and southeast from the summit. On the northern slope of Hualalai Volcano lies the large trachyte pumice cone of Puu Waawaa, and its thick flow of trachyte. These are grouped together as the Waawaa volcanics. They are partly buried by later basalts from both Hualalai and Mauna Loa. The last eruption of Hualalai Volcano, in 1800&ndash;1801, produced olivine basalt. The earliest exposed rocks of Mauna Loa comprise the Ninole volcanic series. Several beds of altered vitric ash are intercalated with the lavas. Following eruption of the Ninole series, a long period or quiescence occurred, during which deep amphitheater-headed valleys were cut. This was followed by the eruption of the Kahuku volcanic series, consisting mostly of lavas with some thin beds of ash. The Rahuku series is overlain by the Pahala ash, which overlies also the Hilina volcanic series on Kilauea, the Hamakua volcanic series on Mauna Kea, and the Hawi volcanic series on Kohala, providing a rough datum for correlation of the lavas of the four mountains. Deposition of the Pahala ash was followed on Mauna Loa by eruption of the Kau volcanic series, which has continued until the present time. The historic and flaws of the Kau series are mapped separately on plate 1. The historic eruptions and volcanic activity of Mauna Loa are briefly described. The western and southern slopes of Mauna Loa are cut by normal faults along which the lower flanks of the mountain have slipped seaward. The Kau volcanic series and presumably also the Kahuku and Ninole volcanic series were erupted principally from vents along two rift zones which extend northeast and southwest from the summit caldera. The lavas of all three series are preponderantly olivine basalt. Many of the lavas contain small amounts of hypersthene. The Pahala ash on the northeastern and eastern slopes of Mauna Loa was derived largely from Mauna Kea. West and south of Kilauea Caldera, however, it was derived principally from Kilauea. Minor amounts were contributed by eruptions of Mauna Loa. It is a vitric basaltic ash, now generally altered to palagonite. The earliest exposed lavas and thin intercalated ash beds of Kilauea Volcano comprise the Hilina volcanic series. These are capped by the Pahala ash, which in turn, is overlain by the lavas and thin ash beds of the Puna volcanic series. The volcanics of both series were erupted along two rift zones, one extending southwestward from Kilauea Caldera, and the other extending southeastward for 5 miles and then bending sharply east by north. The lavas of both series are very largely olivine basalt. A few flows contain hypersthene. Augite phenocrysts are common in Mauna Loa lavas, but rare in those of Kilauea, indicating that crystallization has not progressed as far in the magma chamber of Kilauea Volcano as in that of Mauna Loa. Eruption of the Puna volcanic series has continued until the present time, the historic flows being separated from the prehistoric ones on plate 1. The historic eruptions and volcanic activity of Kilauea are briefly described. Kilauea Volcano originated on the southern slope of Mauna Loa where faults intersected the Eastern Fundamental Fissure of the Hawaiian Archipelago. The southern flank of Kilauea is cut by normal faults, along which the southern part is sliding seaward. The volcanoes of the island of Hawaii are believed to have started their activity in the Tertiary period. The great erosional period which followed deposition of the Pololu and Ninole volcanic series is placed near the end of the Pliocene. The Hilina and Hamakua volcanic series were probably erupted in the late Pliocene and earlier Pleistocene. The Hawi volcanic series and the Waawaa volcanics are probably early or middle Pleistocene in age. The main period of deposition of the Pahala ash was probably late in the middle Pleistocene or early in the upper Pleistocene. The Laupahoehoe volcanic series is late Pleistocene and Recent in age, most of the flows antedating the Wisconsin glaciation. The Hualalai volcanic series probably extends from Tertiary to historic time, and the Kau and Puna volcanic series from late Pleistocene to the present. A chapter is devoted to the petrography of the rocks in which are listed all reliable chemical rock analyses. The rocks of the island are highly permeable. Most of the rainfall sinks quickly into the ground. Perennial streams are present only on the windward slopes of Kohala Mountain and Mauna Kea. Most of the water sinks rapidly to the basal water table, where it floats on salt water according to the Ghyben-Herzberg principle. Basal water escapes in springs at or near sea level all along the coast. Only a very small proportion of it is recovered in wells. Along the windward coasts the basal water is of good quality and large supplies await development. Along the leeward coasts most of the basal water is brackish. In Kohala Mountain, much water is perched on ash beds in the Pololu volcanic series and on ash and soil at the base of the Hawi volcanic series. It escapes in perched springs in the big valleys and along the windward sea cliff and is recovered in tunnels. Along the windward slope of Mauna Keu, small amounts of water are perched by ash beds and dense lava flows in the Hamakua volcanic series. Small perched springs issue from these structures and water is recovered by tunnels. In the Kau District ash beds perch considerable water, which is recovered by many tunnels. On the southern slope of Mauna Kea small springs are perched by beds of hill wash. Dikes in the rift zones are relatively impermeable, but enclose masses of permeable rock. Water is confined at high level in the interdike compartments in Kohala Mountain, and probably in the other volcanoes. It escapes in high-level springs in the deep valleys on Kohala Mountain; some of it is recovered by tunnels. It is estimated that an average of about 13,085 million gallons of water a day falls as rain over the whole island. Of this only about 2.5 percent is visibly discharged from wells, tunnels, and springs. Large supplies of basal groundwater await development. Projects for development of additional water for the city of Hilo and the Kona District are described. Chemical analyses of water, water supplies of towns and villages, descriptions of wells, springs, and tunnels, and discharge records of numerous springs and tunnels are given in tabulated form.

Hawaii↗