SEARCH · Search USGS

Results for “Sedimentary Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources

USGS2013

Borehole-explosion and air-gun data acquired in the 2011 Salton Seismic Imaging Project (SSIP), southern California: description of the survey

The Imperial and Coachella Valleys are being formed by active plate-tectonic processes. From the Imperial Valley southward into the Gulf of California, plate motions are rifting the continent apart. In the Coachella Valley, the plates are sliding past one another along the San Andreas and related faults (fig. 1). These processes build the stunning landscapes of the region, but also produce damaging earthquakes. Rupture of the southern section of the San Andreas Fault (SAF), from the Coachella Valley to the Mojave Desert, is believed to be the greatest natural hazard that California will face in the near future. With an estimated magnitude between 7.2 and 8.1, such an event would result in violent shaking, loss of life, and disruption of infrastructure (freeways, aqueducts, power, petroleum, and communication lines) that might bring much of southern California to a standstill. As part of the nation’s efforts to avert a catastrophe of this magnitude, a number of projects have been undertaken to more fully understand and mitigate the effects of such an event. The Salton Seismic Imaging Project (SSIP), funded jointly by the National Science Foundation (NSF) and the U.S. Geological Survey (USGS), seeks to understand, through seismic imaging, the structure of the Earth surrounding the SAF, including the sedimentary basins on which cities are built. The principal investigators (PIs) of this collaborative project represent the USGS, Virginia Polytechnic Institute and State University (Virginia Tech), California Institute of Technology (Caltech), Scripps Institution of Oceanography (Scripps), University of Nevada, Reno (UNR), and Stanford University. SSIP will create images of underground structure and sediments in the Imperial and Coachella Valleys and adjacent mountain ranges to investigate the earthquake hazards posed to cities in this area. Importantly, the images will help determine the underground geometry of the SAF, how deep the sediments are, and how fast earthquake energy can travel through the sediments. All of these factors determine how hard the earth will shake during a major earthquake. If we can improve on our understanding of how and where earthquakes will occur, and how strong their resultant shaking will be, then buildings can be designed or retrofitted accordingly in order to resist damage and collapse, and emergency plans can be adequately prepared. In addition, SSIP will investigate the processes of rifting and magmatism in the Salton Trough in order to better understand this important plate-boundary region. The Salton Trough is a unique rift in that subsidence is accompanied by huge influxes of infilling sediment from the Colorado River. Volcanism that accompanies the subsidence here is muted by these influxes of sediment. The Salton Trough, in the central part of the Imperial Valley, is apparently made up of entirely new crust: young sediment in the upper crust and basaltic intrusive rocks in the mid-to-lower crust (Fuis and others, 1984). Similar to the ultrasound and computed tomography (CT) scans performed by the medical industry, seismic imaging is a collection of techniques that enable scientists to obtain a picture of what is underground. The petroleum industry routinely uses these techniques to search for oil and gas at relatively shallow depths; however, the scope of this project demanded that we image as much as 30 km into the Earth’s crust. This project generated and recorded seismic waves, similar to sound waves, which move downward into the Earth and are bent (refracted) or echoed (reflected) back to the surface. SSIP acquired data in a series of intersecting lines that cover key areas of the Salton Trough. The sources of sound waves were detonations (shots) in deep boreholes, designed to create energy equivalent to magnitude 1–2 earthquakes. The study region routinely experiences earthquakes of these magnitudes, but earthquakes are not located in such a way as to permit us to create the detailed images we need for earthquake hazard assessment. Air gun bursts, generated in the Salton Sea along extensions of our onshore seismic lines, also were utilized as sound-wave sources. Temporary deployments of portable land seismometers, as well as ocean-bottom seismometers (OBSs) on the floor of the Salton Sea, recorded the energy from the land shots and air gun bursts. SSIP is similar to the Los Angeles Regional Seismic Experiments of 1994 and 1999 (LARSE I and II, respectively; Murphy and others, 1996; Fuis and others, 2001). The LARSE surveys demonstrated that the USGS and collaborators can safely and effectively conduct seismic imaging surveys in urban and nonurban areas, on lands owned and/or managed by many different types of agencies and entities. Information was produced that could not have been obtained any other way, and this information was key to changing the leading ideas about earthquake hazards at that time in the Los Angeles region. These surveys produced no significant environmental impact or damage to structures, and they did not trigger earthquakes.

California↗

USGS2005

Crystalline-rock ejecta and shocked minerals of the Chesapeake Bay impact structure, USGS-NASA Langley core, Hampton, Virginia, with supplemental constraints on the age of impact

The USGS-NASA Langley corehole at Hampton , Va., was drilled 2000 as the first in a series of new coreholes drilled in the late Eocene Chesapeake Bay impact structure to gain a comprehensive understanding of its three-dimensional character. This understanding is important for assessing ground-water resources in the region, as well as for learning about marine impacts on Earth. We studied crystalline-rock ejecta and shock-metamorphosed minerals from the Langley core to determine what they reveal about the geology of crystalline rocks beneath the Atlantic Coastal Plain and how those rocks were affected by the impact . An unusual polymict diamicton, informally called the Exmore beds (upper Eocene), is 33.8 meters (m; 110.9 feet (ft)) thick and lies at a depth of 269.4 to 235.65 m (884.0 to 773.12 ft) in the core . This matrix-supported sedimentary deposit contains clasts of Tertiary and Cretaceous sediment (ranging up to boulder size) and sparse pebbles of crystalline rock . The matrix consists of muddy sand that contains abundant quartz grains and minor glauconite and potassium feldspar. Significantly, the sandy matrix of the Exmore beds contains sparse quartz grains (0.1 to 0.3 millimeter (0.004 to 0.012 inch) in diameter) that contain multiple sets of intersecting planar deformation features formerly referred to as shock lamellae. As many as five different sets have been observed in some quartz grains. Planar deformation features also occur in quartz grains in reworked crystalline-rock clasts in the Exmore beds. Such grains are clearly of shock-metamorphic origin. The presence of these features indicates that the quartz grains have experienced pressures greater than 6 gigapascals (GPa) and strain rates greater than 10 6 /second. Thus, the shock-metamorphosed quartz grains, although rare, provide clear and convincing evidence that the Exmore beds are of hybrid impact origin. Identification of shocked quartz grains in the Langley core adds to the number of sites in the structure where their presence is confirmed. Most of the clasts of crystalline rock that are in and just below the Exmore beds are rounded, detrital, and typical of coastal plain sediments. However, a few have angular shapes and consist of cataclastically deformed felsite having aphanitic-porphyritic to aphanitic texture and peraluminous rhyolite composition. Three of these clasts contain quartz grains that display two sets of planar deformation features of shock-metamorphic origin. Shock-metamorphosed quartz is an integral part of the cataclastic fabric in these three clasts, indicating that both the fabric and the shocked quartz were produced by the same high-energy impact event. Some felsite clasts have spherulitic textures that may be features either of an impact melt or of preimpact volcanic rocks. A weighted-mean total-fusion 40 Ar/ 39 Ar age of 35.3±0.1 Ma (±lσ) for 19 analyses of 4 North American tektites records the age of the late Eocene Chesapeake Bay impact event.

Chesapeake Bay↗

USGS2026

Guidelines for producing integrated 210Pb and 14C age-models

Accurate reconstructions of past environmental changes are crucial in paleoecological research and require reliable chronologies of sedimentary archives. Establishing robust age-models and obtaining the most appropriate proxies for analysis is a complex scientific endeavor, requiring extensive resources and collaboration among specialists, including radiochronologists. Radiometric dating methods, such as 210 Pb and radiocarbon ( 14 C), are frequently employed to establish chronologies in aquatic sedimentary deposits and peat bogs. In this study, we review key aspects of sampling, analysis, and the principles underlying 210 Pb and 14 C age-models, focusing on methods for developing robust joint chronologies for paleoenvironmental research. Drawing largely from the authors' experiences and group discussions during and after a scientific workshop in 2022, we discuss important considerations for site selection, sampling strategies, and radiometric dating to construct integrated 210 Pb and 14 C age-models. Using expert consensus, this group – called Paleostats – aims to provide a set of best practices for other geochronologists with this methods paper. Among our conclusions, we emphasize the importance of accounting for site-specific factors such as prior information on sedimentation rates to establish appropriate sampling and analytical strategies. The use of appropriate coring devices can minimize disturbance to sediments and ensure the core surface remains intact and preserved until sectioning. Where excess 210 Pb is expected, sectioning at intervals of ≤1 cm provides an adequate sampling resolution for 210 Pb dating. Exceptions are possible, allowing for ~2–3 cm sections in areas with confirmed high sedimentation rates (e.g., > 1 cm yr −1 ). Recovering deeper core sections for 14 C dating with sufficient overlap allows for accounting errors in depth estimates made in the field. Special attention is advised during time intervals where validation proxies, such as the human-made radionuclides 137 Cs or post-bomb 14 C, are expected, and to determine the depth of secular equilibrium between 210 Pb and 226 Ra. Radiocarbon analyses are commonly performed by accelerator mass spectrometry, and age models are constructed mainly using Bayesian statistics with Markov Chain Monte Carlo techniques (e.g., Bacon ). A Bayesian approach ( Plum ) is now available for producing 210 Pb age-models, which infers the 210 Pb ex flux, eliminates the need for selecting an equilibrium depth, and allows dating cores with incomplete 210 Pb ex inventory. Plum offers improved chronologies by integrating raw 210 Pb and 14 C data, and these age-models can be enriched with other dating methodologies, such as identifying tephras and other well-recorded historical events. Harmonized reporting would contribute to making radiometric age-models reproducible, which would benefit from an international effort. Using 210 Pb and 14 C to produce integrated age-models may yield better insights into the interplay between natural and recent anthropogenic forcings on ecosystems. This can enhance our understanding of environmental processes and their impacts on climate change, ultimately supporting science-based assessments and decisions.

Earth-Science Reviews↗

USGS2018

Punctuated sediment discharge during early Pliocene birth of the Colorado River: Evidence from regional stratigraphy, sedimentology, and paleontology

The Colorado River in the southwestern U.S. provides an excellent natural laboratory for studying the origins of a continent-scale river system, because deposits that formed prior to and during river initiation are well exposed in the lower river valley and nearby basinal sink. This paper presents a synthesis of regional stratigraphy, sedimentology, and micropaleontology from the southern Bouse Formation and similar-age deposits in the western Salton Trough, which we use to interpret processes that controlled the birth and early evolution of the Colorado River. The southern Bouse Formation is divided into three laterally persistent members: basal carbonate, siliciclastic, and upper bioclastic members. Basal carbonate accumulated in a tide-dominated marine embayment during a rise of relative sea level between ~ 6.3 and 5.4 Ma, prior to arrival of the Colorado River. The transition to green claystone records initial rapid influx of river water and its distal clay wash load into the subtidal marine embayment at ~ 5.4–5.3 Ma. This was followed by rapid southward progradation of the Colorado River delta, establishment of the earliest through-flowing river, and deposition of river-derived turbidites in the western Salton Trough (Wind Caves paleocanyon) between ~ 5.3 and 5.1 Ma. Early delta progradation was followed by regional shut-down of river sand output between ~ 5.1 and 4.8 Ma that resulted in deposition of marine clay in the Salton Trough, retreat of the delta, and re-flooding of the lower river valley by shallow marine water that deposited the Bouse upper bioclastic member. Resumption of sediment discharge at ~ 4.8 Ma drove massive progradation of fluvial-deltaic deposits back down the river valley into the northern Gulf and Salton Trough. These results provide evidence for a discontinuous, start-stop-start history of sand output during initiation of the Colorado River that is not predicted by existing models for this system. The underlying controls on punctuated sediment discharge are assessed by comparing the depositional chronology to the record of global sea-level change. The lower Colorado River Valley and Salton Trough experienced marine transgression during a gradual fall in global sea level between ~ 6.3 and 5.5 Ma, implicating tectonic subsidence as the main driver of latest Miocene relative sea-level rise. A major fall of global sea level at 5.3 Ma outpaced subsidence and drove regional delta progradation, earliest flushing of Colorado River sand into the northern Gulf of California, and erosion of Bouse basal carbonate and siliciclastic members. The lower Colorado River valley was re-flooded by shallow marine waters during smaller changes in global sea level ~ 5.1–4.8 Ma, after the river first ran through it, which requires a mechanism to stop delivery of sand to the lower river valley. We propose that tectonically controlled subsidence along the lower Colorado River, upstream of the southern Bouse study area, temporarily trapped sediment and stopped delivery of sand to the lower river valley and northern Gulf of California for ~ 200–300 kyr. Massive progradation of the fluvial-deltaic system back down the river valley into the Salton Trough starting ~ 4.8–4.5 Ma apparently was driven by a huge increase in sediment discharge that overwhelmed the sediment-storage capacity of sub-basins along the lower river corridor and established the fully integrated river channel network.

Colorado River↗

USGS1995

Hydrogeology of Cibola County, New Mexico

The hydrogeology of Cibola County, New Mexico, was evaluated to determine the occurrence, availability, and quality of ground-water resources. Rocks of Precambrian through Quaternary age are present in Cibola County. Most rocks are sedimentary in origin except for Precambrian igneous and metamorphic rocks exposed in the Zuni Uplift and Tertiary and Quaternary basalts in northern and central parts of the county. The most productive aquifers in the county include (youngest to oldest) Quaternary deposits, sandstones in the Mesaverde Group, the Dakota-Zuni-Bluff aquifer, the Westwater Canyon aquifer, the Todilto- Entrada aquifer, sandstone beds in the Chinle Formation, and the San Andres-Glorieta aquifer. Unconsolidated sand, silt, and gravel form a mantle ranging from a few inches to 150 to 200 feet over much of the bedrock in Cibola County. Well yields range from 5 to 1,110 gallons per minute. Dissolved-solids concentrations of ground water range from 200 to more than 5,200 milligrams per liter. Calcium, magnesium, bicarbonate, and sulfate are the predominant ions in ground water in alluvial material. The Mesaverde Group mainly occurs in three areas of the county. Well yields range from less than 1 to 12 gallons per minute. The predominant ions in water from wells in the Mesaverde Group are calcium, sodium, and bicarbonate. The transition from calcium-predominant to sodium-predominant water in the southwestern part of the county likely is a result of ion exchange. Wells completed in the Dakota-Zuni-Bluff aquifer yield from 1 to 30 gallons per minute. Dissolved-solids concentrations range from 220 to 2,000 milligrams per liter in water from 34 wells in the western part of the county. Predominant ions in the ground water include calcium, sodium, sulfate, and bicarbonate. Calcium predominates in areas where the aquifer is exposed at the surface or is overlain with alluvium. Sandstones in the Chinle Formation yield from 10 to 300 gallons per minute to wells in the Grants-Bluewater area. In the western part of the county, sodium and bicarbonate predominate in water from the Chinle Formation. In the eastern part of the county, water quality is more variable than elsewhere and the predominant constituents include calcium, sodium, sulfate, and chloride. Well yields from the San Andres-Glorieta aquifer in the Grants- Bluewater area are as much as 2,830 gallons per minute, whereas the maximum recorded pumping rate from the aquifer in other areas of the county is 88 gallons per minute. Dissolved-solids concentrations of ground-water range from about 130 to 4,200 milligrams per liter, and the water generally is a calcium bicarbonate sulfate type.

Water-Resources Investigations Report↗

USGS2011

Geological effects and implications of the 2010 tsunami along the central coast of Chile

Geological effects of the 2010 Chilean tsunami were quantified at five near-field sites along a 200 km segment of coast located between the two zones of predominant fault slip. Field measurements, including topography, flow depths, flow directions, scour depths, and deposit thicknesses, provide insights into the processes and morphological changes associated with tsunami inundation and return flow. The superposition of downed trees recorded multiple strong onshore and alongshore flows that arrived at different times and from different directions. The most likely explanation for the diverse directions and timing of coastal inundation combines (1) variable fault rupture and asymmetrical slip displacement of the seafloor away from the epicenter with (2) resonant amplification of coastal edge waves. Other possible contributing factors include local interaction of incoming flow and return flow and delayed wave reflection by the southern coast of Peru. Coastal embayments amplified the maximum inundation distances at two sites (2.4 and 2.6 km, respectively). Tsunami vertical erosion included scour and planation of the land surface, inundation scour around the bases of trees, and channel incision from return flow. Sheets and wedges of sand and gravel were deposited at all of the sites. Locally derived boulders up to 1 m in diameter were transported as much as 400 m inland and deposited as fields of dispersed clasts. The presence of lobate bedforms at one site indicates that at least some of the late-stage sediment transport was as bed load and not as suspended load. Most of the tsunami deposits were less than 25 cm thick. Exceptions were thick deposits near open-ocean river mouths where sediment supply was abundant. Human alterations of the land surface at most of the sites provided opportunities to examine some tsunami effects that otherwise would not have been possible, including flow histories, boulder dispersion, and vegetation controls on deposit thickness.

Central Coast↗

USGS2000

Stable isotope systematics of sulfate minerals

Stable isotope studies of sulfate minerals are especially useful for unraveling the geochemical history of geological systems. All sulfate minerals can yield sulfur and oxygen isotope data. Hydrous sulfate minerals, such as gypsum, also yield oxygen and hydrogen isotope data for the water of hydration, and more complex sulfate minerals, such as alunite and jarosite also yield oxygen and hydrogen isotope data from hydroxyl sites. Applications of stable isotope data can be divided into two broad categories: geothermometry and tracer studies. The equilibrium partitioning of stable isotopes between two substances, such as the isotopes of sulfur between barite and pyrite, is a function of temperature. Studies can also use stable isotopes as a tracer to fingerprint various sources of hydrogen, oxygen, and sulfur, and to identify physical and chemical processes such as evaporation of water, mixing of waters, and reduction of sulfate to sulfide. Studies of sulfate minerals range from low-temperature surficial processes associated with the evaporation of seawater to form evaporite deposits to high-temperature magmatic-hydrothermal processes associated with the formation of base-and precious-metal deposits. Studies have been conducted on scales from submicroscopic chemical processes associated with the weathering of pyrite to global processes affecting the sulfur budget of the oceans. Sulfate isotope studies provide important information to investigations of energy and mineral resources, environmental geochemistry, paleoclimates, oceanography (past and present), sedimentary, igneous, and metamorphic processes, Earth systems, geomicrobiology, and hydrology. One of the most important aspects of understanding and interpreting the stable isotope characteristics of sulfate minerals is the complex interplay between equilibrium and kinetic chemical and isotopic processes. With few exceptions, sulfate minerals are precipitated from water or have extensively interacted with water at some time in their history. Because of this nearly ubiquitous association with water, the kinetics of isotopic exchange reactions among dissolved species and solids are fundamental in dictating the isotopic composition of sulfate minerals. In general, the heavier isotope of sulfur is enriched in the higher oxidation state, such that under equilibrium conditions, sulfate minerals (e.g. barite, anhydrite) are expected to be enriched in the heavy isotope relative to disulfide minerals (e.g. pyrite, marcasite), which in turn are expected to be enriched relative to monosulfide minerals (e.g. pyrrhotite, sphalerite, galena) ( Sakai 1968 , Bachinski 1969 ). The kinetics of isotopic exchange among minerals with sulfur at the same oxidation state, such as sphalerite, and galena, are such that equilibrium is commonly observed. In contrast, isotopic equilibrium for exchange reactions between minerals of different oxidation states depends on factors such as the pH, time and temperature of reaction, the direction of reaction, fluid composition, and the presence or absence of catalysts ( Ohmoto and Lasaga 1982 ). The kinetics of oxygen isotope exchange between dissolved sulfate and water are extremely sluggish. Extrapolation of the high-temperature (100 to 300°C) isotopic exchange kinetic data of Chiba and Sakai (1985) to ambient temperatures suggests that it would take several billions of years for dissolved sulfate and seawater to reach oxygen isotopic equilibrium. In contrast, the residence time of sulfate in the oceans is only 7.9 million years ( Holland 1978 ). However, at higher temperatures (>200°C), oxygen isotopic exchange is sufficiently rapid to permit application of sulfate isotope geothermometry to geothermal systems and hydrothermal mineral deposits. In general, equilibrium prevails at low pH and high temperatures, whereas kinetic factors preclude equilibrium at low temperatures even at low pH. Thus, the sluggish kinetics of sulfur and oxygen isotope exchange reaction at low temperatures impair the use of these isotopes to understand the conditions of formation of sulfate minerals in these environments. However, because of these slow kinetics, the oxygen and sulfur isotopic compositions of sulfate minerals may preserve a record of the sources and processes that initially produced the dissolved sulfate, because the isotope ratios may not re-equilibrate during fluid transport and mineral precipitation. The first part of this chapter is designed to provide the reader with a basic understanding of the principles that form the foundations of stable isotope geochemistry. Next, an overview of analytical methods used to determine the stable isotope composition of sulfate minerals is presented. This overview is followed by a discussion of geochemical processes that determine the stable isotope characteristics of sulfate minerals and related compounds. The chapter then concludes with an examination of the stable isotope systematics of sulfate minerals in a variety of geochemical environments.

Reviews in Mineralogy and Geochemistry↗

USGS1970

The Alaska earthquake, March 27, 1964: Lessons and conclusions

One of the greatest earthquakes of all time struck south-central Alaska on March 27, 1964. Strong motion lasted longer than for most recorded earthquakes, and more land surface was dislocated, vertically and horizontally, than by any known previous temblor. Never before were so many effects on earth processes and on the works of man available for study by scientists and engineers over so great an area. The seismic vibrations, which directly or indirectly caused most of the damage, were but surface manifestations of a great geologic event-the dislocation of a huge segment of the crust along a deeply buried fault whose nature and even exact location are still subjects for speculation. Not only was the land surface tilted by the great tectonic event beneath it, with resultant seismic sea waves that traversed the entire Pacific, but an enormous mass of land and sea floor moved several tens of feet horizontally toward the Gulf of Alaska. Downslope mass movements of rock, earth, and snow were initiated. Subaqueous slides along lake shores and seacoasts, near-horizontal movements of mobilized soil (“landspreading”), and giant translatory slides in sensitive clay did the most damage and provided the most new knowledge as to the origin, mechanics, and possible means of control or avoidance of such movements. The slopes of most of the deltas that slid in 1964, and that produced destructive local waves, are still as steep or steeper than they were before the earthquake and hence would be unstable or metastable in the event of another great earthquake. Rockslide avalanches provided new evidence that such masses may travel on cushions of compressed air, but a widely held theory that glaciers surge after an earthquake has not been substantiated. Innumerable ground fissures, many of them marked by copious emissions of water, caused much damage in towns and along transportation routes. Vibration also consolidated loose granular materials. In some coastal areas, local subsidence was superimposed on regional tectonic subsidence to heighten the flooding damage. Ground and surface waters were measurably affected by the earthquake, not only in Alaska but throughout the world. Expectably, local geologic conditions largely controlled the extent of structural damage, whether caused directly by seismic vibrations or by secondary effects such as those just described. Intensity was greatest in areas underlain by thick saturated unconsolidated deposits, least on indurated bedrock or permanently frozen ground, and intermediate on coarse well-drained gravel, on morainal deposits, or on moderately indurated sedimentary rocks. Local and even regional geology also controlled the distribution and extent of the earthquake's effects on hydrologic systems. In the conterminous United States, for example, seiches in wells and bodies of surface water were controlled by geologic structures of regional dimension. Devastating as the earthquake was, it had many long-term beneficial effects. Many of these were socioeconomic or engineering in nature; others were of scientific value. Much new and corroborative basic geologic and hydrologic information was accumulated in the course of the earthquake studies, and many new or improved investigative techniques were developed. Chief among these, perhaps, were the recognition that lakes can be used as giant tiltmeters, the refinement of methods for measuring land-level changes by observing displacements of barnacles and other sessile organisms, and the relating of hydrology to seismology by worldwide study of hydroseisms in surface-water bodies and in wells. The geologic and hydrologic lessons learned from studies of the Alaska earthquake also lead directly to better definition of the research needed to further our understanding of earthquakes and of how to avoid or lessen the effects of future ones. Research is needed on the origins and mechanisms of earthquakes, on crustal structure, and on the generation of tsunamis and local waves. Better earthquake-hazard maps, based on improved knowledge of regional geology, fault behavior, and earthquake mechanisms, are needed for the entire country. Their preparation will require the close collaboration of engineers, seismologists, and geologists. Geologic maps of all inhabited places in earthquake-prone parts of the country are also needed by city planners and others, because the direct relationship between local geology and potential earthquake damage is now well understood. Improved and enlarged nets of earthquake-sensing instruments, sited in relation to known geology, are needed, as are many more geodetic and hydrographic measurements. Every large earthquake, wherever located, should be regarded as a full-scale laboratory experiment whose study can give scientific and engineering information unobtainable from any other source. Plans must be made before the event to insure staffing, funding, and coordination of effort for the scientific and engineering study of future earthquakes. Advice of earth scientists and engineers should be used in the decision-making processes involved in reconstruction after any future disastrous earthquake, as was done after the Alaska earthquake. The volume closes with a selected bibliography and a comprehensive index to the entire series of U.S. Geological Survey Professional Papers 541-546. This is the last in a series of six reports that the U.S. Geological Survey published on the results of a comprehensive geologic study that began, as a reconnaissance survey, within 24 hours after the March 27, 1964, Magnitude 9.2 Great Alaska Earthquake and extended, as detailed investigations, through several field seasons. The 1964 Great Alaska earthquake was the largest earthquake in the U.S. since 1700. Professional Paper 546, in 1 part, describes Lessons and Conclusions.

Alaska↗

USGS1997

Reinterpretation of the peninsular Florida Oligocene: An integrated stratigraphic approach

A very thick (> 300 m) nearly continuous Oligocene section exists in southern peninsular Florida, as revealed by lithostratigraphic, biostratigraphic (mollusks and dinocysts), chronostratigraphic (Sr isotopes) and petrographic analyses of twelve cores and two quarries. The Oligocene deposits in the subsurface of southern Florida are the thickest documented in the southeastern U.S., and they also may represent the most complete record of Oligocene deposition in this region. No major unconformities within the Oligocene section are detected in the southern portion of the peninsula; hiatuses at the Eocene-Oligocene boundary, the early Oligocene-late Oligocene boundary, and the late Oligocene-Miocene boundary, are of limited duration if they exist at all. No significant disconformity is recognized between the Suwannee Limestone and the Arcadia Formation in southern Florida. However, on the east coast of Florida a hiatus of more than 12 m.y., spanning from at least the middle of the early Oligocene to early Miocene is present. The Suwannee Limestone was deposited during the early Oligocene. The top of the Suwannee Limestone appears to be diachronous across the platform. The 'Suwannee' Limestone, previously identified incorrectly as a late Oligocene unit, is herein documented to be early Oligocene and is encompassed in the lower Oligocene Suwannee Limestone. An unnamed limestone, found on the east coast of the peninsula is, at least in part, correlative with the Suwannee Limestone. The Arcadia Formation, basal Hawthorn Group, accounts for a large portion of the Oligocene deposition in southern Florida, spanning the interval from the middle of the early Oligocene to at least the early Miocene. Comparisons of the depositional patterns, and the distribution of dolomite and phosphate within the Suwannee Limestone and the Arcadia Formation, suggest fluctuating sea levels and that the paleo-Gulf Stream played a role in determining the nature and extent of Oligocene deposition in peninsular Florida.

Florida↗

USGS1972

Regional and other general factors bearing on evaluation of earthquake and other geologic hazards to coastal communities of southeastern Alaska

The great Alaska earthquake of March 27, 1964, brought into sharp focus the need for engineering geologic studies in seismically active regions. As a result, nine communities in southeastern Alaska were selected for reconnaissance investigations as an integral part of an overall program to evaluate earthquake and other geologic hazards in most of the larger Alaska coastal communities. This report gives background information on the regional and other general factors that bear on these evaluations. Southeastern Alaska, about 525 miles long and averaging about 125 miles in width, consists of a narrow mainland strip and numerous islands. For the most part, it is a region of rugged relief with numerous glaciers capping many of the higher mountainous areas and with long linear fiords forming the inland waterways. A maritime climate prevails with mild winters and cool summers. The southeastern part of the region receives the highest precipitation in the continental United States. Ketchikan, with a population of 6,994 in 1970, is the largest city. Geology and structure of the area are complex. Igneous, metamorphic, and sedimentary rocks crop out and range in age from Paleozoic to Tertiary. Surficial deposits of Pleistocene and Holocene age mantle many areas. All of southeastern Alaska, except probably the highest peaks, was covered by glacier ice advances of late Pleistocene age. Major deglaciation was well advanced by 10,000 years ago--a time which approximately marks the end of the Pleistocene and the beginning of the Holocene. There followed a period of warm climate called the Hypsithermal, which in southeastern Alaska began 7,000-8,000 years ago and ended about 4,800-3,500 years ago. Glaciers in most places receded back of their present positions. The Hypsithermal was followed by an interval (termed Neoglaciation) of cooler climate and resurgence of glacier ice which continues to the present, although most glaciers are now rapidly receding. During the past 10,000 years worldwide sea level has risen about 100 feet, but during the past 4,000 years it has risen only about 10 feet or about 0.03 inch per year. With sea level used as a datum, the amount of sea-level rise must be added to the apparent uplift of land for the time under consideration to determine the actual amount of land uplift. The widespread presence of emergent marine deposits, several hundred feet above sea level, demonstrates that the land in southeastern Alaska has been uplifted since the last major deglaciation. The greatest known has been uplifted since the last major deglaciation. The greatest known uplift is in the vicinity of Juneau where glaciomarine deposits are present 750 feet above present sea level. Part of southeastern Alaska is presently undergoing one of the most rapid rates of uplift of any place in the world. The fastest emergence is occurring in the Glacier Bay area where the land is being uplifted relative to sea level approximately 3.9 cm per year. Most or all of the uplift appears to be due to rebound as a result of deglaciation. Southeastern Alaska lies within the circum-Pacific earthquake belt, one of the world's greatest zones of seismic activity. During historic time, there have been five earthquakes in the region with magnitudes of 8 or greater, three with magnitudes of 7 to 8, eight with magnitudes of 6 to 7, more than 15 with magnitudes of 5 to 6, and about 140 recorded earthquakes with magnitudes smaller than 5 or of unassigned magnitudes. All of the earthquakes with magnitudes 8 or greater, and a large proportion of the others, appear to be related to the active Fairweather- Queen Charlotte Islands fault system or its western extension, the Chugach-St. Elias fault. Earthquake epicenters on the Denali fault system, the other major fault system in southeastern Alaska, are few in comparison. However, because high microearthquake activity has been recorded recently on this system and earthquakes of moderate size have occurred on some of its segments, the Denali fault system probably should not be dismissed as a relict fault system of no current tectonic importance. There are numerous other known faults, as well as lineaments that may be faults of varying degrees of tectonic activity in southeastern Alaska, adjacent Canada, and eastern Alaska. One of these elements is the Totschunda fault system, which connects with the Denali fault system in eastern Alaska; it has been very active during Holocene time but few historical earthquake epicenters appear to be related to it. Both historical seismicity and geologic conditions, such as frequency and recency of faulting, must be considered together to permit an assessment of the future earthquake probability of an area. Data are too few for both factors for an accurate evaluation to be made of earthquake probability in southeastern Alaska. However, information compiled in the form of strain-release and seismic-zone maps permit some generalizations. Thus, it is tentatively concluded that most, if not all, of southeastern Alaska should be placed in seismic zone 3, a zone in which earthquakes of magnitude greater than 6 will occur from time to time and where there may be major damage to manmade structures. Inferred effects from future earthquakes in southeastern Alaska include: (1) surface displacement along faults and other tectonic land-level changes, (2) ground shaking, (3) compaction, (4) liquefaction in cohesionless materials, (5) reaction of sensitive and quick clays, (6) water-sediment ejection and associated subsidence and ground fracturing, (7) earthquake-induced sub aerial slides and slumps, (8) earthquake induced subaqueous slides, (9) effects on glaciers and related features, (10) effects on ground water and stream flow, and (11) tsunamis, seiches, and other abnormal water waves. Because of the reconnaissance nature of our studies in the coastal communities and the sparsity of laboratory data on physical properties of geologic units in each area studied, the inferred effects must be largely empirical and generalized. Therefore, the inferences are based in large part upon the effects of past major earthquakes in Alaska and elsewhere, particularly upon the well-documented effects of the Alaska earthquake of March 27, 1964. Buildings, highways, bridges, tunnels, harbor facilities, pipelines, canals, and other manmade structures may be severely damaged or destroyed by fault displacement or related tectonic land-level changes in southeastern Alaska. Direct damage from fault rupture would be restricted virtually to structures built directly athwart the fault. In California and Nevada, fault rupture almost always accompanies shocks of magnitude 6.5 or greater. The Alaska earthquake of March 27, 1964, and the Chilean earthquake of May 22, 1960, dramatically illustrated the severe adverse effects that can result from uplift or subsidence over a wide area. The variable most responsible for the degree of shaking at any epicentral distance is the type of ground. Generally, shaking is considerably greater in poorly consolidated deposits than in hard bedrock, particularly if the deposits are water saturated. Severe shaking of alluvial deposits and manmade fill, with resultant heavy damage, is well documented from the records of many past earthquakes. Damage commonly has been heavy as a result of ground settlement caused by compaction of loose sediments by shaking during an earthquake. This has been especially true where compaction was accompanied by tectonic downdrop of land, such as occurred during the Chilean earthquake of 1960 and the Alaska earthquake of 1964. Loosely emplaced manmade fill, deltaic deposits, beach deposits, and alluvial deposits may be susceptible to compaction in southeastern Alaska during a severe earthquake. Liquefaction of sand and silt is a fairly common effect of large earthquakes. It was well illustrated at Niigata, Japan, during the earthquake of June 16, 1964, and resulted in extensive damage. When part of a sloping soil mass liquefies, the entire mass can undergo catastrophic failure and can flow as a high-density liquid. In southeastern Alaska, deltaic deposits probably would be most susceptible to liquefaction. Sensitive and quick clays, which lose a considerable part of their strength when shaken, commonly fail during an earthquake and become rapid earthflows. Extensive studies were made of the sensitivity of the Bootlegger Cove Clay at Anchorage because of the marked loss of shear strength and dramatic failures of the deposits during the Alaska earthquake of 1964. If similar sensitive clays are present in some places in southeastern Alaska, they most likely are in some of the emergent fine-grained marine deposits; supporting data to confirm their presence, however, are largely lacking. Records of some 50 major earthquakes show that in at least half of the instances water and sediment have been ejected from surficial deposits Water-sediment ejection and associated subsidence and ground fracturing commonly cause extensive damage to the works of man. Ejecta may fill basements and other low-lying parts of buildings. Agricultural land can be covered with a blanket of infertile soils, and small ponds can be filled or made shallow. In southeastern Alaska these phenomena are most likely to occur on valley floors, deltas, tidal flats, alluvial fans, swamps, and lakeshores. Earthquake-induced sliding on land generally is confined to steep slopes but may take place in fine-grained deposits on moderately to nearly flat surfaces if the deposits are subject to liquefaction. A large rockslide triggered by the Lituya Bay, Alaska, earthquake of July 10, 1958, generated a wave that surged up the opposite wall of the inlet to a record height of 1,740 feet. During the Hebgen Lake, Montana, earthquake of August 17, 1959, a spectacular rockslide plunged into the Madison River canyon, buried 28 people, dammed the river, and created a large lake. Earthquake-records are replete with accounts of sliding of surficial deposits during moderate to large earthquakes. Most or all of the general factors that favor subaerial landsliding are present in southeastern Alaska. Earthquake-induced subaqueous slides can produce adverse effects both nearshore and some distance offshore. Nearshore sliding may progress shoreward and destroy harbor facilities and other structures, commonly with substantial loss of life. Disastrous large submarine slides occurred along the fronts of deltas in Seward and Valdez during the Alaska earthquake of 1964. In similar fashion, the largest submarine slides in southeastern Alaska likely will be triggered along the larger delta fronts. Sliding farther offshore can constitute a threat to navigation because of changes in water depths. Also underwater sliding can break communication cables. Glaciers were not greatly affected by the Alaska earthquake of 1964 despite the fact that about 20 percent of the area that underwent strong shaking is covered by ice. In contrast, the cataclysmic avalanche of ice and rock that fell from a high glacier-covered peak in Peru during the earthquake of May 31, 1970, produced devastating effects downvalley on man and his works in the form of mudflows. Most towns in southeastern Alaska are sufficiently distant from glaciers so as not be to directly affected. Both the Alaska earthquake of 1964 and the Hebgen Lake, Montana, earthquake of 1959 significantly affected ground- and surface-water regimens. Water levels in some wells declined whereas in others flow increased. Some springs discharged at a rate three times as much as normal; flow of others decreased or stopped. Discharge of many streams increased markedly. Most or all of the effects described above could occur in parts of southeastern Alaska during future large earthquakes. Tsunamis, seiches, and other abnormal water waves associated with large earthquakes commonly cause vast property damage and heavy loss of life. Tsunami effects can be devastating to coastal areas as far as many thousands of miles from their generation source. Seiche effects generally are confined to inland bodies of water or to relatively enclosed coastal bodies of water. Abnormal waves generated by submarine sliding or by subaerial sliding into water generally produce only local effects but may be highly devastating. Tsunami waves resulting from the Chilean earthquake of 1960 inflicted extensive damage and loss of life on coastal communities throughout a large part of southern Chile, and significant runups and damage were recorded in many places throughout the Pacific Ocean area. The tsunami waves generated by the Alaska earthquake of 1964 struck with devastating force along a broad stretch of the Alaska coast and produced heavy property damage and loss of life as far away as Crescent City, Calif. Seiche waves generated by that earthquake reached runup heights of 20-30 feet on some lakes in Alaska, and water-level fluctuations were recorded on streams, reservoirs, lakes, and swimming pools in States bordering the Gulf of Mexico. Waves generated by submarine sliding struck violently at a number of places during or immediately after the quake and were the major cause of loss of life and damage to property. Slide-generated waves probably would have a higher destructive potential in southeastern Alaska than either tsunami waves or seiche waves because of their possibly higher local runups and because they can hit the shores almost without warning during or immediately after an earthquake. Nonearthquake-related geologic hazards, although generally far less dramatic than those related to earthquakes, tend to occur so much more frequently or persistently that their aggregate effects can be significant. Three kinds of geologic hazards of this type are discussed: (1) nonearthquake-induced landsliding and subaqueous sliding, (2) flooding, and (3) land uplift. The potential for nonearthquake-triggered landsliding in southeastern Alaska ranges widely from place to place. Past sliding generally furnishes the clue in the prediction of where and in what materials future sliding will occur. Fast-moving rockslides, debris slides, and mudflows can be expected to occur from time to time on steep slopes and be highly destructive to highways, power plants, pipelines, buildings, and other facilities located on a slope or at its base. Present slow downslope movement of talus can be expected to continue at the same general rate unless conditions are changed by man or there are climatic changes. Snow and debris avalanches can be especially hazardous during winter months. Long-inactive landslides may be triggered into renewed activity or new slides may be created by man-induced modifications. Accelerated slope erosion and debris flows may follow large-scale clearing and cutting of timber. Subaqueous sliding can be expected to occur periodically along fronts of deltas and on other oversteepened underwater slopes. Floods have been common in parts of southeastern Alaska because of heavy precipitation and rapid runoff from steep slopes with resulting heavy damage to roads and other facilities. Continued damage can be expected in the future unless more remedial measures are taken. Current uplift of land in southeastern Alaska, although probably not affecting man significantly in a short period of time, may have some adverse long-term effects. These long-term effects should be borne in mind when facilities such as docks and boat harbors are constructed on or near the shore, where there is a critical relation between height of land and water.

Alaska↗

USGS1991

Geochemistry of a Tertiary sedimentary phosphate deposit: Baja California Sur, Mexico

The San Gregorio Formation in Baja California Sur, a phosphate-enriched sedimentary unit of late Oligocene to early Miocene age, has been analyzed in two areas (La Purisima and San Hilario) for its chemical composition (major oxides, Cu, Cd, Cr, Co, V, and rare-earth elements - REE) and isotopic composition (??18O and ??13C). A detrital and a marine component were determined from major oxides. The detrital component consists of an unaltered volcanic-ash fraction and a terrigenous clay-silt fraction. The marine component, which accumulated initially as biogenic and hydrogenous material, is now present as opal-A, opal-CT, CaCO3, organic matter, and an authigenic phosphate fraction, mostly pelletal and composed of the carbonate-fluorapatite mineral francolite. The minor elements have been partitioned into these components by assuming a constant composition for the two detrital fractions. The composition of the marine component of minor elements can then be interpreted by assuming that the stoichiometry of the original accumulating organic matter was equal to that of modern plankton. The Cu and Cd contents in the marine component of all rocks require that the seawater-derived fractions of these two metals were supplied to the seafloor solely by organic matter. Enrichments of Cr and V at both sites required an additional marine input. On the basis of their geochemistry in the modern ocean, Cr and V could have precipitated, or been adsorbed, onto settling particles from an O2 minimum zone in which the O2 content was low enough to promote denitrification rather than oxygen respiration. An enrichment of the REE, now within the apatite fraction, resulted from their adsorption onto particulates also in the O2 minimum zone and to the dissolution and alteration of biogenic phases (predominantly silica) within the sediment. Co and Fe2O3 show no enrichment above a detrital contribution. The ??18O-values of apatites from the La Purisima site are heavier than those of apatites from the San Hilario site, whereas the ??13C-values show the opposite trend. One possible interpretation of these variations is that ??18O reflects seawater values and ??13C sediment pore water values. This interpretation suggests that upwelling rates and primary productivity within the water column were greater at La Purisima, an interpretation that is corroborated by a greater abundance of apatite measured in outcrop at La Purisima. The Ce anomalies of the phosphate-enriched samples also differ between the two sites, indicating that they also recorded water masses, similar to the ??18O-values. ?? 1991.

Chemical Geology↗

USGS2026

Preliminary bedrock geologic map of the Port Henry quadrangle, Essex County, New York, and Addison County, Vermont

Introduction The bedrock geology of the 7.5-minute Port Henry quadrangle consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 Ga (giga-annum). In the Port Henry quadrangle, the AMCG metaigneous rocks (Yhg, Ygb, Yanw) intruded older, mostly metasedimentary rocks of the Grenville Complex during the middle to late Shawinigan orogeny (~1,160–1,150 Ma [mega-annum]). All rocks were subsequently metamorphosed to upper amphibolite to granulite facies conditions during the 1,080–1,050 Ma Ottawan orogeny. New mapping reveals four periods of deformation: (1) D1 produced rarely preserved isoclinal folds in the paragneiss and marble and predates AMCG magmatism. (2) Subsequent D2 deformation produced the dominant gneissic fabric preserved in the rock, recumbent folding, and deformed all the Proterozoic units in the map area. Syn- to late-D2 felsic magmatism resulted in the regionally extensive Lyon Mountain Granite Gneiss, which hosts numerous magnetite ore bodies. (3) Mylonitic extensional shear zones and core complex formation marked the beginning of D3 deformation. Protracted D3 deformation resulted in F3 upright folding, dome and basin formation, pegmatite intrusion, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron-ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. (4) D4 created northeast- and northwest-trending local high-grade ductile shear zones and boudinage, northwest-trending regional kilometer (km)-wide ductile shear zones, and crosscutting granitic pegmatite dikes. The development of the late-stage regional shear zones (D4) was likely due to the continuation of extensional doming and uplift from upper amphibolite facies conditions at the end of the Ottawan orogeny. The majority of iron-ore deposits in the Port Henry and adjacent Witherbee quadrangles are in the hanging wall of these extensional shear zones. In the Port Henry quadrangle, the km-wide Cheney Mountain shear zone is the result of D4 deformation. Kilometer-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. The Paleozoic rocks are part of the Early Cambrian to Late Ordovician carbonate bank on the ancient margin of Laurentia. The approximately 1-km-thick Cambrian to Ordovician stratigraphy records a transition from synrift clastics to passive-margin peritidal carbonate buildups to gradually deeper-water subtidal- to shelf-carbonates during foreland basin development associated with the Taconic orogeny. The Paleozoic rocks are weakly folded and block faulted. Large areas of the Champlain Valley are covered by undifferentiated glacial deposits, some of which contain mapped landslides. The map also shows waste rock piles and tailings from historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondacks, provide a context for historical iron mines in the eastern Adirondacks, and update the stratigraphy of the Champlain Valley in New York and Vermont. This Open-File Report includes a bedrock geologic map; a description of map units; a correlation of map units; and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information.

New York, Vermont↗

USGS1982

Sedimentation and deformation in the Amlia Fracture Zone sector of the Aleutian Trench

A wedge-shaped, landward thickening mass of sedimentary deposits composed chiefly of terrigenous turbidite beds underlies the west-south west-trending Amlia sector (172°20′–173°30′W) of the Aleutian Trench. Pacific oceanic crust dips northward beneath the sector's sedimentary wedge and obliquely underthrusts (30° off normal) the adjacent Aleutian Ridge. The trench floor and subsurface strata dip gently northward toward the base of the inner trench slope. The dip of the trench deposits increases downsection from about 0.2° at the trench floor to as much as 6–7° just above basement. The wedge is typically 2–2.5 km thick, but it is thickest (3.7–4.0 km) near the base of the inner slope overlying the north-trending Amlia Fracture Zone and also east of this structure. Slight undulations and relatively abrupt offsets of the trench floor reflect subsurface and generally west-trending structures within the wedge that are superimposed above ridges and swales in the underlying oceanic basement. The southern or seaward side of some of these structures are bordered by high-angle faults or abrupt flexures. Across these offsets the northern side of the trench floor and underlying wedge is typically upthrown. West-flowing turbidity currents originating along the Alaskan segment of the trench (1200 km to the east) probably formed the greater part of the Amlia wedge during the past 0.5 m.y. The gentle northward or cross-trench inclination of the trench floor and underlying wedge probably reflects regional downbending of the oceanic lithosphere and trench-floor basement faulting and rotation. Much of the undulatory flexuring of the trench wedge can be attributed to differential compaction over buried basement relief. However, abrupt structural offsets attest to basement faulting. Faulting is associated with extensional earthquakes in the upper crust. The west-trending basement offsets are probably normal faults that dip steeply south or antithetic to the north dip of the subducting oceanic crust. Up-to-arc extensional faulting can be attributed to the downbending of the Pacific plate into the Aleutian subduction zone. The rupturing direction and dip is controlled by zones of crustal weakness that parallel north Pacific magnetic anomalies, which were formed south of a late Cretaceous—early Tertiary spreading center (Kula—Pacific Ridge). The strike of these anomalies is fortuitously nearly parallel to the Amlia sector. The up-to-arc fracturing style may locally assist in elevating blocks of trench deposits to form the toe of the trench's landward slope, which is in part underlain by a compressionally thickened accretionary mass of older trench deposits. Compressional structures that can be related to underthrusting are only indistinctly recorded in the turbidite wedge that underlies the trench floor.

Alaska↗

USGS1964

Ground-water resources of the South Platte River Basin in western Adams and southwestern Weld Counties, Colorado

The area described in this report consists of about 970 square miles in western Adams and southwestern Weld Counties in northeastern Colorado. It includes that part of the South Platte River valley between Denver and Kuner, Colo., all of Beebe Draw, and the lower part of the valley of Box Elder Creek. The stream-valley lowlands are separated by rolling uplands. The climate is semiarid, the normal annual precipitation being about 13 inches; thus, irrigation is essential for stable agricultural development. The area contains about 220,000 acres of irrigated land in the stream valleys. Most of the remaining 400,000 acres of land is used for dry farming or grazing because it lacks irrigation water. Most of the lowlands were brought under irrigation with surface water during the early 1900's, and now nearly all the surface water in the area is appropriated for irrigation within and downstream from the area. Because the natural flow of the streams is sometimes less than the demand for water, ground water is used to supplement the surface-water supply. Wells, drilled chiefly since 1930, supply the supplemental water and in some places are the sole supply for irrigation use. Rocks exposed in the area are of sedimentary origin and range in age from Lato Cretaceous to Recent. Those that are consolidated, called 'bedrock' in this report, consist of the Fox Hills sandstone and the Laramie and Arapahoe formations, all of Late Cretaceous age, and the Denver formation and Dawson arkose of Late Cretaceous and Tertiary age. The surface of the bedrock was shaped by ancestral streams, the valleys of which are reflected by the present surface topography. Dune sand, slope wash, and thin upland deposits of Quaternary age mantle the bedrock in the divide areas, and stream deposits ranging in thickness from 0 to about 125 feet partly fill the ancestral valleys. The valley-fill deposits consist of beds and lenses of clay, silt, sand, gravel, cobbles, and boulders. Abundant supplies of ground water for irrigation, municipal, and industrial use are obtained in the principal stream valleys from wells tapping valley-fill deposits beneath the flood plain and bordering terraces. Many domestic and stock wells obtain water from the unconsolidated deposits both on the uplands and in the valleys. The ground water in the valley-fill deposits generally is unconfined but in a few places is under slight artesian pressure. The bedrock formations yield small to moderate supplies of water to municipal, industrial, domestic, and stock wells, but the yields are not sufficient for irrigation. Ground water in the South Platte River valley moves downstream and toward the river and is discharged into the river. The direction of ground-water movement in Beebe Draw and Box Elder Creek valley is nearly parallel to the streams. Beebe Seep, the stream in Beebe Draw, gains water from the groundwater reservoir in some reaches and loses water in others, but Box Elder Creek loses water to the ground-water reservoir throughout its course especially during floods. The shape and slope of the water table are affected chiefly by the permeability of the valley-fill deposits, the location and altitude of the areas of recharge and discharge, and the configuration of the underlying bedrock floor. The depth to water in the South Platte River valley ranges from less than 1 foot beneath the flood plain to as much as 80 feet beneath the terraces. In Beebe Draw the depth to water ranges from less than 1 foot to about 60 feet and in Box Elder Creek valley from about 5 feet to about 40 feet. During the period of record the annual fluctuation of water levels in wells in the area has ranged from 2 to 13 feet. Precipitation within the area and infiltrating water from irrigated tracts, reservoirs, canals, and streams are the principal sources of recharge to the ground-water reservoir; some recharge results from underflow from outside the area. Ground water is discharged by evapotranspiratio

Water Supply Paper↗

USGS2004

Paleozoic sedimentary rocks in the Red Dog Zn-Pb-Ag district and vicinity, western Brooks Range, Alaska: provenance, deposition, and metallogenic significance

Geochemical analyses of Paleozoic sedimentary rocks in the western Brooks Range reveal a complex evolutionary history for strata surrounding the large Zn-Pb-Ag deposits of the Red Dog district. Data for major elements, trace elements, and rare earth elements (REE) were obtained on 220 samples of unaltered and unmineralized siliciclastic rocks from the Upper Devonian-Lower Mississippian Endicott Group (Hunt Fork Shale, Noatak Sandstone, Kanayut Conglomerate, Kayak Shale), the overlying Carboniferous Lisburne Group (Kuna Formation, unnamed drowned shelf facies), and the Pennsylvanian-Permian Siksikpuk Formation. Major base metal sulfide deposits of the region are present only in the Kuna Formation, which in the Red Dog district comprises siliceous black shale and black chert, minor limestone (calcareous radiolarite), and sparse lithic turbidite and bedded siliceous rock. Gray and rare black shales of the Kayak Shale and common black shales of the Kuna Formation are anomalously low in iron (avg Fe/Ti = 6.25 and 6.34, respectively) relative to other Paleozoic shales in the region (9.58-10.6) and to average shales worldwide (10.1-10.5). In contrast, the bedded siliceous rocks contain appreciable hematite (avg Fe/Ti = 35.0) and high U/Ti and REE/Ti ratios that are interpreted to reflect low amounts of detrital material and a major Fe-rich eolian component. Geochemical data (e.g., MnO <0.01 wt %; avg Cr = 317 ppm), sizes of framboidal pyrite grains, and limited bioturbation suggest anoxic and denitrifying depositional conditions for most black shales of the Kuna Formation; low Mo/Ti ratios argue against euxinic (sulfate-reducing) conditions. Organic-rich black shales of the Kuna Formation with up to 8.4 wt percent C organic and gray to black shales of the Kayak Shale with up to 4.1 wt percent C organic typically have only sparse pyrite (<1 wt % S) and very low iron-limited S/C ratios (mostly <0.2). Immobile element plots (e.g., Th-Zr/10-Sc) suggest that source terranes for all of the formations were dominated by one or more felsic-rich continental arcs; a small proportion of recycled sediments is present locally. A minor mafic igneous component also occurs in several shales of the Kuna and Siksikpuk Formations. High average values for the chemical index of alteration [Al 2 O 3 /(Al 2 O 3 + CaO + Na 2 O + K 2 O)] ∞ 100 for shales of the Endicott Group (76.4-81.5) imply moderate to intense chemical weathering in source areas of these sediments. A lower average for black shales of the Kuna Formation (73.7) does not require such weathering. Textural and geochemical data record the effects of diagenetic and/or hydrothermal fluid flow in some of the Paleozoic rocks. Mobility of P, F, U, and light REE is documented in black shales of the Kuna Formation by phosphate replacements of carbonate clasts and of matrix material surrounding the clasts. A relatively low average Ce/Ce* value of 0.73 for P-poor black shales of the Kuna Formation ( < 0.05 wt % P 2 O 5 ) and a similar Ce/Ce* value of 0.78 for a siderite concretion in Kayak Shale suggest that these diagenetic fluids were oxidizing. Many shales of the Kuna Formation have high (K 2 O ∞ 100)/(K 2 O + Al 2 O 3 ) ratios of 21.0 to 23.0, which contrast with low ratios of generally <18.0 for shales of the underlying Endicott Group. The high ratios in shales of the Kuna Formation reflect preferential reaction of smectite to illite during the Jurassic-Cretaceous Brookian orogeny, owing to high silica activities in pore fluids that were generated by the dissolution of abundant biogenic silica. The distribution and composition of Paleozoic strata in the western Brooks Range may have played a fundamental role in Zn-Pb mineralization of the Red Dog district. In our model, deposition and early lithification of biogenic chert and bedded siliceous rocks in the upper part of the Kuna Formation served as a regional hydrologic seal, acting as a cap rock to heat and hydrothermal fluids during Late Mississippian base-metal mineralization. Equally important was the iron-poor composition of black shales of the Kuna Formation (i.e., low Fe/Ti ratios), which limited synsedimentary pyrite formation in precursor sediments, resulting in significant H 2 S production in pore waters through the interaction of aqueous sulfate with abundant organic matter. This H 2 S may have been critical to the subsurface deposition of the huge quantities of Zn and Pb in the district. On the basis of this model, we propose that low Fe/Ti and S/C ratios in black shale sequences are potential basin-scale exploration guides for giant sediment-hosted, stratiform Zn-Pb-Ag deposits.

Alaska↗

USGS1978

The marine geology of the eastern Santa Barbara Channel, with particular emphasis on the ground water basins offshore from the Oxnard Plain, Southern California

Marine geophysical investigations provide new data concerning the stratigraphy, tectonic and sedimentary history, and the ground water geology of the southeastern Santa Barbara Channel region. The offshore stratigraphy identified in seismic reflection profiles includes a succession of Neogene to Quaternary strata. The middle Miocene Conejo volcanics form an acoustical basement and the overlying late Cenozoic sedimentary rocks attain a thickness greater than 2,500 m. These sedimentary deposits fill a structurally controlled, physiographic and depositional depression called the Ventura Basin. Structure consists generally of a gently folded, east-trending Tertiary synclinorium bordered on the north by a regional thrust fault and on the south by a steep asymmetrical anticlinal ridge. Most structures show evidence of north-south compression that occurred during early Pleistocene time. Three well-defined unconformities represent widespread erosion in late Miocene, early to middle Pleistocene, and late Pleistocene time. The boundaries of Miocene, Pliocene, and lower Pleistocene strata continue uninterrupted eastward along the southern part of Santa Barbara basin to Hueneme Canyon, where they turn northeast and can be traced to the coast near Port Hueneme. These limits probably represent the south edge of the Santa Barbara basin during Pliocene and Pleistocene time. Fresh water-bearing materials of the Oxnard plain are unconsolidated Quaternary sediment laid down on more consolidated Tertiary rocks. Offshore, the total fresh water-bearing materials distinguished in the seismic reflection profiles attain a thickness of about 356 m and have an areal extent of over 760 km2. Strata that contain the offshore continuation of the five major on-land aquifers (Grimes Canyon, Fox Canyon, Hueneme, Mugu, and Oxnard aquifers) are identified in the seismic reflection profiles. These strata make up the two offshore ground-water basins, the Mound and Oxnard plain ground-water basins, which are separated by the east-west trending Oak Ridge fault. Possible entrance areas for salt water intrusion into fresh water aquifers are found along the walls of the submarine canyons and along the northern slopes of Santa Barbara and Santa Monica basins. Hueneme and Mugu aquifers are probably exposed locally in all five submarine canyons of the Oxnard offshore area and may also crop out along the upper northern slope of Santa Monica basin. In all of these areas, salt water readily intrudes the aquifers. A salinity-temperature-depth study made in April, 1971, does not indicate any great dilution of surface ocean water by fresh water that could be 'leaking' from the exposed aquifers along the walls of Hueneme Canyon and the landward slope of Santa Barbara Channel. Earthquakes in the vicinity of the Oxnard plain suggest that the region is seismically active. Epicenters are widely dispersed over the region. No distinct trend or alignment of earthquake epicenters occurs near the trace of any of the faults, although many epicenters are scattered around the Oak Ridge zone of deformation in the northern part of the region. The largest magnitude earthquake recorded in the area was a magnitude 5.7 that occurred on February 21, 1973, offshore of Point Mugu, south of the Oxnard plain.

California↗

USGS1942

General geology and ground-water resources of the island of Maui, Hawaii

Maui, the second largest island in the Hawaiian group, is 48 miles long, 26 miles wide, and covers 728 square miles. The principal town is Wailuku. Sugar cane and pineapples are the principal crops. Water is used chiefly for irrigating cane. The purpose of the investigation was to study the geology and the ground-water resources of the island. Maui was built by two volcanoes. East Maui or Haleakala Volcano is 10,025 feet high and famous for its so-called crater, which is a section of Hawaii National Park. Evidence is given to show that it is the head of two amphitheater-headed valleys in which numerous secondary eruptions have occurred and that it is not a crater, caldera, or eroded caldera. West Maui is a deeply dissected volcano 5,788 feet high. The flat Isthmus connecting the two volcanoes was made by lavas from East Maui banking against the West Maui Mountains. Plate 1 shows the geology, wells, springs, and water-development tunnels. Plate 2 is a map and description of points of geologic interest along the main highways. Volcanic terms used in the report are briefly defined. A synopsis of the climate is included and a record of the annual rainfall at all stations is given also. Puu Kukui, on West Maui, has an average annual rainfall of 389 inches and it lies just six miles from Olowalu where only 2 inches of rain fell in 1928, the lowest ever recorded in the Hawaiian Islands. The second rainiest place in the Territory is Kuhiwa Gulch on East Maui where 523 inches fell during 1937. Rainfall averages 2,360 million gallons daily on East Maui and 580 on West Maui. Ground water at the point of use in months of low rainfall is worth about $120 per million gallons, which makes most undeveloped supplies valuable. The oldest rocks on East Maui are the very permeable primitive Honomanu basalts, which were extruded probably in Pliocene and early Pleistocene time from three rift zones. These rocks form a dome about 8,000 feet high and extend an unknown distance below sea level. Covering this dome are the Kula volcanics, extruded probably in early and middle Pleistocene time, and characterized by andesites, andesitic basalts, and picritic basalts. They are 2.000 feet thick on the summit and 50 to 200 feet thick at the periphery. They contain a sufficient number of interbedded soils, thin vitric tuff beds, and lava-filled valleys in their upper part to give rise to valuable perched springs in wet areas. The Kula lavas accumulated during a waning volcanic phase which was followed by a quiescence long enough for the erosion of deep amphitheater-headed valleys in the east or wet half of the mountain. Volcanic activity was renewed in middle (?) to late Pleistocene time and continued until Recent time, during which the Hana volcanic series was laid down. The last lava flow was erupted about 1750. The Hana lavas comprise andesitic, picritic, and olivine basalts. They veneered large areas of the east and south slopes, partly filled the deep amphitheater-headed valleys, and deeply buried the smaller valleys in the eastern half of the mountain. The Hana rocks are exceedingly permeable and much rain sinks into them. The oldest rocks on West Maui are the very permeable primitive Wailuku basalts, which were extruded probably in Pliocene and early Pleistocene time from two rifts and from many radial fissures. The basalts form a dome about 5,600 feet high and extend an unknown distance below sea level. Iao Valley is the eroded caldera of this dome. Forming an incomplete veneer over the dome are the Honolua soda trachytes and oligoclase andesites. They were extruded in late Pliocene (?) or early Pleistocene time, chiefly from bulbous domes. The clinker beds carry some water but the rocks are generally too dense to be good aquifers. During early (?) Pleistocene the West Maui volcano was cut by deep amphitheater-headed valleys and then all of Maui was deeply submerged. Four scattered eruptions occurred on West Maui in middle (?) and late Pleistocene time. The cones and lavas cover only small areas and are called the Lahaina volcanic series. The sedimentary rocks of both East and West Maui are chiefly late Quaternary and comprise fans, landslide debris, delta deposits, and valley fills, mostly of poorly permeable and poorly assorted bouldery alluvium. They are overlain on the Isthmus by extensive calcareous dunes of three ages. A mud flow more than 300 feet thick is exposed in Kaupo Valley. During the fluctuations of the ocean in the Pleistocene, the island was emerged and submerged several times. Calcareous fossiliferous marine conglomerates deposited during this period are found up to an altitude of 250 feet on West Maui. The Homomanu, Wailuku, and Kula lavas are the chief aquifers. They supply 28 irrigation wells which yield an average of 170 million gallons a day of basal water. These wells are mine-like shafts with infiltration tunnels and are called Maui-type wells. Well 16 yields 40,000,000 gallons daily with a 22-foot drawdown, which is the largest amount yielded by any well in the Hawaiian Islands. The largest spring (no. 26) on the island is artesian. It yields 10,400,000 gallons daily and issues from Kula lavas near Nahiku. West Maui has numerous perennial streams supplied by springs from a dike complex. Twenty-three tunnels in West Maui recover 20.5 million gallons a day of high-level water, mostly from this dike complex. East Maui has few perennial streams in proportion to its size, and they are chiefly small due to the water sheds being underlain with permeable lavas. Forty tunnels recover 6 million gallons a day of high-level water in East Maui and all from structures other than dikes. It is estimated that about 100 million gallons a day of basal water wastes into the sea from West Maui and about 700 million gallons a day from East Maui. A number of sites are described where wells could be sunk to recover this water. Sites are also described where tunnels could be driven to recover high-level supplies. The hydrology of East and West Maui is conspicuously different in many respects, mainly because of the difference in the stage of dissection, the extensive veneer of very permeable Hann lavas on East Maui, and the comparatively small area of the Lahaina lavas of similar age on West Maui. The only thermal water known in the Hawaiian Islands, except on the active volcano of Kilauea, is in a well in West Maui. The Nahiku area has been mapped and studied in detail. The upper part of the Honomanu volcanic series, exposed in the sea cliffs, in petrographic character is transitional into the overlying Kula lavas, Kula and Hana time were characterized by a long succession of valley-cutting episodes, each valley being filled by lava erupted from the east rift zone. The lavas include olivine basalts, picritic basalts, and basaltic andesites, In the Nahiku area basal ground water occurs largely in the Honomanu basalts. Perched water occurs in many of the later lavas, generally following the axes of buried valleys. The members which perch the water are mostly ashy soil beds, although an unusually extensive, thick layer of much decomposed clinker also appears to be a supporting member. Most of the water travels through the basal clinker members of aa lavas. Artesian water is encountered in the upper, transitional part of the Honomanu volcanic series. The aquifer is permeable porphyritic pahoehoe; the confining members are relatively impermeable nonporphyritic aa. The lavas of East Maui are described according to stratigraphic groups. The oldest or Honomanu lavas are olivine basalts like the primitive lavas in other Hawaiian volcanoes. The later or Kula and Hana lavas include basalts, basaltic andesites, andesites, and picritic basalts. The normative nepheline of analyzed East Maui lavas has not been identified in the mode. The degree of differentiation is inversely proportional to the frequency of eruptions. The lavas of West Maui volcano are divided into the Wailuku volcanic series, consisting largely of olivine basalts with less abundant olivine-poor basalts, hypersthene basalts, and picritic basalts; the Honolua volcanic series, consisting of oligoclase andesites and soda trachytes; and the Lahaina volcanic series, consisting of nepheline basanite and picritic basalts. Coarse-grained gabbros intrude the Wailuku lavas. Differentiation was undoubtedly partly by crystal settling, but the alkali curves of the variation diagram suggest that volatile transfer was of some importance.

Hawaii↗

USGS1963

Ground-water geology of Bexar County, Texas

The investigation in Bexar County was part of a comprehensive study of a large area in south-central Texas underlain by the Edwards and associated limestones (Comanche Peak and Georgetown) of Cretaceous age. The limestones form an aquifer which supplies water to the city of San Antonio, several military installations, many industrial plants, and many irrigated farms. The geologic formations that yield water to wells in Bexar County are sedimentary rocks of Mesozoic and Cenozoic age. The rocks strike northeastward and dip southeastward toward the Gulf of Mexico. In the northern part of the county, in an erosional remnant of the Edwards Plateau, the rocks are nearly flat and free from faulting. In the central and southern parts of the county, however, the rocks dip gulfward at gentle to moderately steep angles and are extensively faulted in the Balcones and Mexia fault zones. Individual faults or shatter zones were traced as much as 25 miles; the maximum displacement is at least 600 feet. In general, the formations are either monoclinal or slightly folded; in the western part of the county the broad Culebra anticline plunges southwestward. Most of the large-capacity wells in Bexar County draw water from the Edwards and associated limestones, but a few draw from the Glen Rose limestone, the Austin chalk, and surficial sand and gravel. The Hosston formation, Glen Rose limestone, Buda limestone, and Austin chalk, all of Cretaceous age, generally yield small to large supplies of water; the Wilcox group and Carrizo sand of Tertiary age yield moderate supplies and alluvium of Pleistocene and Recent age generally yield small supplies. The Edwards and associated limestones are recharged primarily by groundwater underflow into Bexar County from the west, and secondarily by seepage from streams that cross the outcrop of the aquifer in Bexar County. During the period 1934-47 the recharge to the aquifer in Bexar County is estimated to have averaged between 400,000 and 430,000 acre-feet per year. Discharge from the aquifer takes place by means of wells and springs and by underflow into Comal and Guadalupe Counties on the northeast. During the period 1934-47 the estimated average discharge from wells and springs was about 174,000 acre-feet per year. The discharge by underflow out of the county during the same period is estimated to have averaged between 220,000 and 260,000 acre-feet per year. Probably only a small amount of water moves downdip southeast of San Antonio. The presence of highly mineralized water in that area suggests that the circulation of water is poor because of the low permeability of the aquifer. During the period 1934-56 the discharge from the Edwards and associated limestones greatly exceeded the recharge; consequently, water levels in wells declined. The decline was greatest in the northwestern part of the county, where the water levels in wells dropped as much as 100 feet. The decline was progressively less toward the east, averaging 40 feet along the Bexar-Comal County line. The area of the greatest concentration of discharge, which includes San Antonio and extends to the southwest and northeast, coincides with the area of maximum faulting and maximum recorded yields from wells and is not the area of greatest decline. The ability of the Edwards and associated limestones to transmit and store water in the San Antonio area apparently is so great that the discharge from wells results in much smaller declines of water level than do similar or even smaller discharges in other areas. The water from the Edwards is almost uniformly a calcium bicarbonate water of good quality, although hard. In the southern part of the San Antonio area the water is charged with hydrogen sulfide; farther downdip it becomes highly mineralized.

Water Supply Paper↗