Search USGS⌕ Search

SEARCH · Search USGS

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources
USGS2004

Assessment of soil and water contaminants from selected locations in and near the Idaho Army National Guard Orchard Training Area, Ada County, Idaho, 2001-2003

In 2001, the National Guard Bureau and the U.S. Geological Survey began a project to compile hydrogeologic data and determine presence or absence of soil, surface-water, and ground-water contamination at the Idaho Army National Guard Orchard Training Area in southwestern Idaho. Between June 2002 and April 2003, a total of 114 soil, surface-water, ground-water, precipitation, or dust samples were collected from 68 sample sites (65 different locations) in the Orchard Training Area (OTA) or along the vehicle corridor to the OTA. Soil and water samples were analyzed for concentrations of selected total trace metals, major ions, nutrients, explosive compounds, semivolatile organics, and petroleum hydrocarbons. Water samples also were analyzed for concentrations of selected dissolved trace metals and major ions. Distinguishing naturally occurring large concentrations of trace metals, major ions, and nutrients from contamination related to land and water uses at the OTA was difficult. There were no historical analyses for this area to compare with modern data, and although samples were collected from 65 locations in and near the OTA, sampled areas represented only a small part of the complex OTA land-use areas and soil types. For naturally occurring compounds, several assumptions were made?anomalously large concentrations, when tied to known land uses, may indicate presence of contamination; naturally occurring concentrations cannot be separated from contamination concentrations in mid- and lower ranges of data; and smallest concentrations may represent the lowest naturally occurring range of concentrations and (or) the absence of contaminants related to land and water uses. Presence of explosive, semivolatile organic (SVOC), and petroleum hydrocarbon compounds in samples indicates contamination from land and water uses. In areas along the vehicle corridor and major access roads within the OTA, most trace metal, major ion, and nutrient concentrations in soil samples were not in the upper 10th percentile of data, but concentrations of 25 metals, ions, or nutrients were in the upper 10th percentile in a puddle sample near the heavy equipment maneuvering area, MPRC-H. The largest concentrations of tin, ammonia, and nitrite plus nitrate (as nitrogen) in water from the OTA were detected in a sample from this puddle. Petroleum hydrocarbons were the most common contaminant, detected in all soil and surface-water samples. An SVOC, bis (2-ethylhexyl) phthalate, a plasticizer, was detected at a site along the vehicle corridor. In Maneuver Areas within the OTA, many soil samples contained at least one trace metal, major ion, or nutrient in the upper 10th percentile of data, and the largest concentrations of cobalt, iron, mercury, titanium, sodium, ammonia, or total phosphorus were detected in 6 of 13 soil samples outside the Tadpole Lake area. The largest concentrations of aluminum, arsenic, beryllium, nickel, selenium, silver, strontium, thallium, vanadium, chloride, potassium, sulfate, and nitrite plus nitrate were detected in soil samples from the Tadpole Lake area. Water from Tadpole Lake contained the largest total concentrations of 19 trace metals, 4 major ions, and 1 nutrient. Petroleum hydrocarbons were detected in 5 soil samples and water from Tadpole Lake. SVOCs related to combustion of fuel or plasticizers were detected in 1 soil sample. Explosive compounds were detected in 1 precipitation sample.In the Impact Area within the OTA, most soil samples contained at least one trace metal, major ion, or nutrient in the upper 10th percentile of data, and the largest concentrations of barium, chromium, copper, manganese, lead, or orthophosphate were detected in 6 of the 18 soil samples. Petroleum hydrocarbons were detected in 4 soil samples, SVOCs in 6 samples, and explosive compounds in 4 samples. In the mobilization and training equipment site (MATES) compound adjacent to the OTA, all soil and water samples contained at lea

Scientific Investigations Report↗
USGS1991

Late quaternary geologic framework, north-central Gulf of Mexico

The geologic framework of the north-central Gulf of Mexico shelf is composed of multiple, stacked, delta systems. Shelf and nearshore sedimentary facies were deposited by deltaic progradation, followed by shoreface erosion and submergence. A variety of sedimentary facies has been identified, including prodelta, delta fringe, distributary, lagoonal, barrier island, and shelf sand sheet. This study is based on the interpretation and the synthesis of > 6,700 km of high-resolution seismic profiles, 75 grab samples, and 77 vibracores. The nearshore morphology, shallow stratigraphy, and sediment distribution of the eastern Louisiana shelf are the products of transgressive sedimentary processes reworking the abandoned St. Bernard delta complex. Relatively recent Mississippi delta lobe consists primarily of fine sand, silt, and clay. In the southern portion of the St. Bernard delta complex, asymmetrical sand ridges (>5 m relief) have formed as the result of marine reworking of distributary mouth-bar sands. Silty sediments from the modern Mississippi Birdsfoot delta onlap the St. Bernard delta complex along the southern edge. The distal margin of the St. Bernard complex is distinct and has a sharp contact on the north near the Mississippi Sound barrier island coastline and a late Wisconsinan delta to the south. The Chandeleur Islands and the barrier islands of Mississippi Sound have been formed by a combination of Holocene and Pleistocene fluvial processes, shoreface erosion, and ravinement of the exposed shelf. Sediments underlying the relatively thin Holocene sediment cover are relict fluvial sands, deposited during the late Wisconsinan lowstand. Subsequent relative sea-level rise allowed marine processes to rework and redistribute sediments that formed the nearshore fine-grained facies and the shelf sand sheet.

Conference Paper↗
USGS1989

Morphology and stratigraphy of small barrier-lagoon systems in Maine

The coast of Maine contains over 200 individual barrier-lagoon systems, most quite small, with an aggregate length of nearly 100 km. Although they represent less than 5% of the tidally influenced coastline of Maine, they are widely distributed and occur in a variety of dynamic regimes and physiographic regions. Their morphology and backbarrier stratigraphy are different from better studied coastal plain systems, and provide important clues to the Holocene evolution of the Maine coast. In a study of geomorphic form and backbarrier stratigraphy, inlet processes and Holocene sea-level rise have been identified as the principal controls on coarse-grained barrier stratigraphy. Barriers in Maine are found in five distinct geomorphic forms, identified herein as: barrier spits, pocket barriers, double tombolos, cuspate barriers and looped barriers. The few long sandy beaches in southwestern Maine are mostly barrier spits. The remainder of the barrier types is composed primarily of gravel or mixed sand and gravel. The barriers protect a variety of backbarrier environments: fresh and brackish ponds, lagoons and fresh- and saltwater marshes. The barriers may or may not have inlets. Normal wave action, coarse-grain size and a deeply embayed coast result in barriers with steep, reflective profiles several meters above MHW. Occasional storm events completely wash over the barriers, building steep, lobate gravel fans along their landward margin. Few, if any, extensive storm layers are recognized as extending into the distal backbarrier environments, however. During sea-level rise and landward barrier retreat, this abrupt, storm-generated transition zone inters the backbarrier sediments. Statistical comparisons of barrier morphology, location and backbarrier environment type with backbarrier stratigraphy show that Holocene backbarrier stratigraphy is best predicted by the modern backbarrier environment type. This, in turn, is influenced most by the absence or presence, and long-term stability or instability of a tidal inlet. Geomorphic barrier form and location in coastal geomorphic compartments show little or no correlation with backbarrier stratigraphy. In contrast to previous classifications of barrier-lagoon systems based primarily on sandy, coastal plain examples, in Maine the shape or origin of the backbarrier system is relatively unimportant. The presence or absence of a tidal inlet is of paramount importance in shaping the Holocene stratigraphy of the backbarrier region.

Marine Geology↗
USGS1980

Depositional environments of some Pleistocene coastal terrace deposits, southwestern Oregon - case history of progradational beach and dune sequence.

These deposits comprise a basal gravelly unit and 3 overlying sandy units, each with mud beds, a paleosol, or the modern soil in its uppermost part. The gravelly unit is interpreted as a progradational deposit. The main parts of the sandy units are made up of 1) a crossbedded sand facies, the dominant structure in which is medium-scale crossbedding (interpreted as the product of small eolian dunes), and 2) an irregularly bedded sand facies, which is locally pebbly and is dominated by scour-and-fill structures, interpreted as deposits of interdune ephemeral streams, ephemeral ponds, and wet to dry subaerial flats. The mud beds and paleosols represent times of temporary stabilization of the dune field.- from Author

Sedimentary Geology↗
USGS2015

Archive of bathymetry data collected at Cape Canaveral, Florida, 2014

Remotely sensed, geographically referenced elevation measurements of the sea floor, acquired by boat- and aircraft-based survey systems, were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida, for the area at Cape Canaveral. The work was conducted as part of a study to describe an updated bathymetric dataset collected in 2014 and compare it to previous data sets. The updated data focus on the bathymetric features and sediment transport pathways that connect the offshore regions to the shoreline and, therefore, are related to the protection of other portions of the coastal environment, such as dunes, that support infrastructure and ecosystems. Cape Canaveral Coastal System (CCCS) is a prominent feature along the Southeast U.S. coastline and is the only large cape south of Cape Fear, North Carolina. Most of the CCCS lies within the Merritt Island National Wildlife Refuge and included within its boundaries are the Cape Canaveral Air Force Station (CCAFS), NASA’s Kennedy Space Center (KSC), and a large portion of Canaveral National Seashore. The actual promontory of the modern cape falls within the jurisdictional boundaries of the CCAFS. Hydrographic survey data were collected August 18-20, 2014 ( USGS Field Activity Number 2014-324-FA ). The study covered a 20 kilometer (km) section of shoreline extending from Port Canaveral, Fla., to the northern end of the KSC property, and from the shoreline to about 2.5 km offshore. Data were acquired using both sound navigation and ranging (sonar) and light detection and ranging (lidar) systems. Two jet skis and a 17-foot (ft) outboard motor boat equipped with the USGS SANDS (System for Accurate Nearshore Depth Surveying) hydrographic system collected precision sonar data. The USGS airborne EAARL-B mapping system flown in a twin engine airplane was used to collect lidar data. The missions were synchronized so that there was temporal and spatial overlap between the sonar and lidar operations. Additional data were collected to evaluate water clarity to verify the ability of lidar to receive bathymetric returns. Both systems used differential Global Positioning System GPS and utilized the National Oceanic and Atmospheric Administration/National Geodetic Survey (NOAA/NGS) Continuously Operating Reference Station (CORS) station located at CCAFS was used as the reference station. This data series serves as an archive of processed single-beam sonar and lidar bathymetry data. Graphical Information System (GIS) data products include XYZ point bathymetry data files, a color coded bathymetry map, and interpolated bathymetry grid surface. Additional information includes an error analysis and formal Federal Geographic Data Committee (FGDC) metadata. For more information about similar projects, please visit the Barrier Island Evolution Web site.

Florida↗
USGS2017

Geologic overview of the Mars Science Laboratory rover mission at the Kimberley, Gale crater, Mars

The Mars Science Laboratory (MSL) Curiosity rover completed a detailed investigation at the Kimberley waypoint within Gale crater from sols 571-634 using its full science instrument payload. From orbital images examined early in the Curiosity mission, the Kimberley region had been identified as a high-priority science target based on its clear stratigraphic relationships in a layered sedimentary sequence that had been exposed by differential erosion. Observations of the stratigraphic sequence at the Kimberley made by Curiosity are consistent with deposition in a prograding, fluvio-deltaic system during the late Noachian to early Hesperian, prior to the existence of most of Mt. Sharp. Geochemical and mineralogic analyses suggest that sediment deposition likely took place under cold conditions with relatively low water-to-rock ratios. Based on elevated K2O abundances throughout the Kimberley formation, an alkali feldspar protolith is likely one of several igneous sources from which the sediments were derived. After deposition, the rocks underwent multiple episodes of diagenetic alteration with different aqueous chemistries and redox conditions, as evidenced by the presence of Ca-sulfate veins, Mn-oxide fracture-fills, and erosion-resistant nodules. More recently, the Kimberley has been subject to significant aeolian abrasion and removal of sediments to create modern topography that slopes away from Mt. Sharp, a process that has continued to the present day.

Journal of Geophysical Research E: Planets↗
USGS1989

The New Madrid earthquakes: An engineering-geologic interpretation of relict liquefaction features

Earthquake-induced sand blows and sand-filled fissures are present in a belt 40 to 60 km. wide that extends from near Charleston, Mo., southward to about 20 km. south of Marked Tree, Ark. This region of earthquake-induced sand blows and other liquefaction-related features is almost exclusively in the St. Francis Basin, an alluvial lowland that typically has a thin (2 to 8 m thick), clay-bearing topstratum underlain by about 30 to 60 m of unconsolidated sand (the substratum). Liquefaction of the substratum sands has made the sand blows. The sand blows and other liquefaction-related features on the ground surface in the St. Francis Basin are almost certainly results of the New Madrid earthquakes of 1811-12. In this report, geologic and engineering properties of the alluvium are used in combination with a map showing the bounds of the liquefaction-related features to locate approximately the epicentral zones for two of the major shocks: the earthquakes of December 16,1811, and February 7,1812. Properties used for the analysis included the Standard Penetration Resistance of the substratum sands, characteristics of the sand's grain size, thickness of the topstratum, and the thickness of the post-Tertiary alluvium. The method of analysis relies largely on the evaluation of the liquefaction potential of the sands. This is done by using the Standard Penetration Test blow counts and by devising a method that uses all possible combinations of liquefaction potential and a realistic relation between attenuation of earthquake accelerations and distance from the epicenter (or more correctly, energy-release center). Two interpreted 1811-12 energy-release centers generally agree well with zones of seismicity defined by modern, small earthquakes. Bounds on accelerations are placed at the limits of sand blows that were generated by the 1811-12 earthquakes in the St. Francis Basin. Conclusions show how the topstratum thickness, sand size of the substratum, and thickness of alluvium affected the distribution of sand blows in the St. Francis Basin.

Arkansas, Missouri, Tennessee↗
USGS1987

Stable isotope compositions of fossil mollusks from southern California: Evidence for a cool last interglacial ocean.

Stable isotope compositions have been determined for modern mullusks and fossil mollusks collected from uplifted marine terraces at three localities in southern California. By using a paleoclimatic model that decouples the temperature and ice-volume signals in ocean water, ocean-water temperatures off southern California are estimated to have been −3.8 °C at ∼85 ka, −3.0 °C at ∼107 ka, and −2.2 °C at ∼125 ka relative to present temperature. These results indicate rather cool conditions during the peak of the last interglacial stage at 125 ka and conflict with results from terrace faunal studies that suggest water temperatures were warm or warmer than at present.

Geology↗
USGS1981

Tonalites in crustal evolution

Tonalites, including trondhjemite as a variety, played three roles through geological time in the generation of Earth’s crust. Before about 2.9 Ga ago they were produced largely by simple partial melting of metabasalt to give the dominant part of Archaean grey gneiss terranes. These terranes are notably bimodal; andesitic rocks are rare. Tonalites played a crucial role in the generation of this protocontinental and oldest crust 3.7- 2.9 Ga ago in that they were the only low-density, high-SiO 2 rocks produced directly from basaltic crust. In the enormous event giving the greenstone-granite terranes, mostly 2.8-2.6 Ga ago, tonalites formed in lesser but still important proportions by partial melting of metabasalt in the lower regions of down-buckled greenstone belts and by remobilization of older grey gneisses. Tectonism in the Archaean (3.9- 2.5 Ga ago) perhaps was controlled by small-cell convection (McKenzie & Weiss 1975). Little or no ophiolite or eclogite formed, and only minor andesite. Plate tectonics of modern type (involving large, rigid plates) commenced in the early Proterozoic. Uniformitarianism thus goes back one-half of the age of the earth. Tonalites compose about 5-10 % of crust generated in Proterozoic and Phanerozoic time at convergent oceanic-continental margins. They occur here as minor to prominent members of the compositionally continuous continental-margin batholiths. A simple model of generation of these batholiths is offered: mantle-derived mafic magma pools in the lower crust above a subduction zone reacts with and incorporates wall-rock components (Bowen 1922), and breaches its roof rocks as an initial diapir. This mantle magma also develops a gradient of partial melting in its wall rocks. This wall-rock melt accretes in the collapsed chamber and moves up the conduit broached by the initial diapir, the higher, less siliceous fractions of melting first, the lower, more siliceous (and further removed) fractions of melting last. The process gives in the optimum case a mafic-to-siliceous sequence of diorite or quartz diorite through tonalite or quartz monzodiorite to granodiorite and granite. The model implies that great masses of cumulate phases and refractory wall rock form the roots of continentalmargin batholiths, and that migmatites overlie that residuum and underlie the batholiths.

Philosophical Transactions of the Royal Society A:↗
USGS2021

Reconnaissance study of the major and trace element content of bauxite deposits in the Arkansas bauxite region, Saline and Pulaski Counties, central Arkansas

The Arkansas bauxite district, which comprises about 275 square miles (710 square kilometers) of central Arkansas, produced an order of magnitude more bauxite and alumina than the other bauxite districts in the United States combined. Bauxite was mined in the region continuously from 1898 to 1982. These bauxites are laterite deposits, formed from intensive in-place weathering of the exposed surface of the Granite Mountain pluton, a Late Cretaceous batholith composed mainly of nepheline syenite and lesser amounts of syenite. Nepheline syenite was the aluminum source for the bauxite and clay deposits that blanket the pluton. The early Eocene continental sedimentary rocks that contain and overlie the bauxite deposits indicate that central Arkansas had a warm tropical environment during bauxite formation. Bauxite ores are the principal sources of aluminum. Some of the global bauxite deposits have been found to contain co-occurring metals that have essential applications in modern technologies. For example, bauxite is the largest global source of gallium (Ga), used in semiconductors, which is recovered as a byproduct of processing bauxite to recover alumina. Other critical metal commodities within some bauxites that reportedly have potential for byproduct recovery include niobium (Nb), scandium (Sc), and rare earth elements (REEs). Currently (2021), the United States is wholly dependent on imports for its supplies of bauxite for processing to produce alumina. The United States is also dependent on foreign sources of gallium, niobium, and scandium, as well for most of its domestic requirements of REEs. For these reasons, samples were collected from Arkansas bauxite deposits, associated clays, mill residue wastes (respectively referred to as red muds and black sands), and the parent nepheline syenite to determine their elemental content, with a particular focus on gallium, niobium, scandium, and REEs. Each sample was analyzed for 60 elements; these data and the methods used are published as a U.S. Geological Survey data release. The results indicate that, of the critical metals in bauxites, gallium is a potential byproduct from the central Arkansas bauxite deposits. The highest gallium concentrations occur in the raw bauxite ore, with an average concentration of 76 parts per million (ppm). Gallium partitions with alumina (the product) rather than into mine waste residues. Results indicate an average niobium content of 662 ppm in the Arkansas bauxite ores. Niobium progressively increases in concentration from parent syenite (247 ppm) to clays (315 ppm) and further from bauxite (662 ppm) to processed residues (1,075 ppm). Low concentrations of scandium were found in all samples, averaging 10 ppm or less in the parent rock (syenite), bauxite, clays, and processing residues. Modest concentrations of the light and heavy REEs were found in samples of bauxite ores, bauxitic clays and interbedded clays, syenite, and the residues of ore. The highest REE values were found in processed residues, with average concentrations of 613 ppm total light REEs and 130 ppm total heavy REEs. These concentrations suggest that additional processing to recover REEs is unlikely to be economic in the foreseeable future.

Arkansas↗
USGS1996

USGS response to an urban earthquake, Northridge '94

The urban centers of our Nation provide our people with seemingly unlimited employment, social, and cultural opportunities as a result of the complex interactions of a diverse population embedded in an highly-engineered environment. Catastrophic events in one or more of the natural earth systems which underlie or envelop urban environment can have radical effects on the integrity and survivability of that environment. Earthquakes have for centuries been the source of cataclysmic events on cities throughout the world. Unlike many other earth processes, the effects of major earthquakes transcend all political, social, and geomorphic boundaries and can have decided impact on cities tens to hundreds of kilometers from the epicenter. In modern cities, where buildings, transportation corridors, and lifelines are complexly interrelated, the life, economic, and social vulnerabilities in the face of a major earthquake can be particularly acute. The 1994 Northridge Earthquake was a major test for parts of what many consider the most earthquake-prepared and best-engineered metropolitan region in the United States. While the combined efforts of concerned professionals at all levels of government, academia, and the private sector have produced significant advances in our knowledge of the causes and potential effects of earthquakes, and of ways to reduce their impact, it remains unfortunately true that actual earthquakes provide important opportunities to test those advances in our knowledge. In the hours and days following the Northridge Earthquake, the four Federal member agencies of the National Earthquake Hazards Reduction Program (NEHRP), the Federal Emergency Management Agency (FEMA), the National Institute for Standards and Technology (NIST), the National Science Foundation (NSF), and the United States Geological Survey (USGS) laid out a detailed plan for collecting, analyzing, archiving, and reporting information that would benefit the Nation in future earthquake hazards reduction efforts. Congress provided a special appropriation to FEMA to carry out this plan and FEMA distributed those funds to the four NEHRP agencies. The USGS was responsible for conducting geophysical and geological investigations in support of the NEHRP Post-earthquake Study. For the past 2 years, the USGS has rigorously pursued over 40 tasks focused on the USGS Northridge Earthquake Mission. This document is a summary report of the USGS findings; additional technical reports on specific USGS tasks are appearing in various scientific journals and USGS publications.

California↗
USGS2004

The National Assessment of Shoreline Change: A GIS Compilation of Vector Shorelines and Associated Shoreline Change Data for the U.S. Gulf of Mexico

Introduction The Coastal and Marine Geology Program of the U.S. Geological Survey has generated a comprehensive database of digital vector shorelines and shoreline change rates for the U.S. Gulf of Mexico. These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Beach erosion is a chronic problem along most open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of shoreline migration. There is also a critical need for shoreline change data that is consistent from one coastal region to another. One purpose of this work is to develop standard repeatable methods for mapping and analyzing shoreline movement so that periodic updates regarding coastal erosion and land loss can be made nationally that are systematic and internally consistent. This data compilation for open-ocean, sandy shorelines of the Gulf of Mexico is the first in a series that will eventually include the Atlantic Coast, Pacific Coast, and parts of Hawaii and Alaska. Short- and long-term shoreline change evaluations are based on merging three historical shorelines with a modern shoreline derived from lidar (light detection and ranging) topographic surveys. Historical shorelines generally represent the following time periods: 1800s, 1920s-1930s, and 1970s. The most recent shoreline is derived from data collected over the period of 1998-2002. Long-term rates of change are calculated by linear regression using all four shorelines. Short-term rates of change are simple end-point rate calculations using the two most recent shorelines. Please refer to our full report on shoreline change in the Gulf of Mexico, National Assessment of Shoreline Change: Part 1, Historical Shoreline Changes and Associated Coastal Land Loss Along the U.S. Gulf of Mexico (USGS Open File Report 2004-1043) for additional information regarding methods and results. Data in this report are organized into data layers by state and are provided as single-point vector datasets with metadata. Vector shorelines may represent a compilation of data from one or more sources and these sources are attributed in the dataset. All data are intended to be GIS-ready inasmuch as the data should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System (GIS). This project employs the Environmental Systems Research Institute's (ESRI) ArcView as its GIS mapping tool and contains several data layers (or themes) that are used to create a geographic view of the margin off the U.S. Gulf of Mexico. These vector data form a basemap comprised of polygon and line themes that include a U.S. coastline (1:80,000), U.S. cities, and state boundaries.

Open-File Report↗
USGS1979

Geology, petrology, and chemistry of the Leadville Dolomite: host for uranium at the Pitch Mine, Saguache County, Colorado

Newly documented uranium ore in the Pitch Mine occurs chiefly in brecciated Mississippian Leadville Dolomite along the Chester reverse fault zone, and to a lesser extent in sandstone, siltstone, and carbonaceous shale of the Pennsylvanian Belden Formation and in Precambrian granitic rocks and schist. Uranium-mineralized zones are generally thicker, more consistent, and of higher grade in dolomite than in other hosts, and roughly 50 percent of the new reserves are in dolomite. Strong physical control by dolomite is evident, as this is the only lithology that is pervasively brecciated within the fault slices that make up the footwall of the reverse fault zone. Other lithologies tend to either remain unbroken or undergo ductile deformation. Chemical controls are subtle and appear to involve chiefly formation of FeS2 as pyrite and marcasite, which accompany uranium. Leadville Dolomite in the area is about 130 m thick and is predominantly nonfossiliferous dolomicrite. In the Pitch Mine, Leadville Dolomite is bound by faults and maximum known thickness is about 17 m. Mud texture, paucity of fossils and other allochems, thin laminations, and probable algal mat structures suggest sedimentation in a tidal-flat (possibly supratidal) environment. Preservation of mud texture and lack of replacement features indicate that dolomitization was an early, prelithification process, as in modern tidal flats, and produced a chemically and texturally uniform rock over tens of meters with relatively few limestone beds surviving. The sedimentary and diagenetic environment of the tidal-flat dolomite, apparently most favorable for uranium deposits, probably obtained over a large area and should consistute an exploration target over a broad area of central Colorado. Carbonate rocks of the Belden Formation, in contrast to those of the Leadville, contain calcite in great excess of dolomite, more than 5 percent silt-size quartz and clay, and abundant fossils and oolites. Belden limestones (sandy micrite and sandy wackestone) probably were deposited in an intertidal or subtidal environment. Very little uranium ore occurs in these rocks. Chemical aspects, such as the iron, sulfur, and organic carbon contents, are very similar to those of Leadville dolomites, and hence seem favorable, but Belden limestones generally are only mildly fractured. The minor-element content of ore-bearing dolomites is generally normal judging from the relatively scarce data yet published for comparable rocks. Elements enriched in ore include iron, sulfur, molybdenum, and lead. One surface expression of ore in dolomite is ocher-colored, leached, porous gossan that is characterized by residual silica and limonite and by high radioactivity but low chemical uranium content.

Open-File Report↗
USGS2001

Origin of late Quaternary dune fields on the Southern High Plains of Texas and New Mexico

Mostly stabilized late Holocene eolian sands on the Southern High Plains of the United States were studied to determine their origins and to assess whether present dune stability depends more strongly on sediment supply, sediment availability, or transport limitations. Geomorphic, sedimentological, and geochemical trends indicate that late Holocene dunes formed under westerly paleowinds, broadly similar to those of today. Mineralogical and geochemical data indicate that the most likely source for the sands is not the Pecos River valley, but the Pleistocene Blackwater Draw Formation, an older, extensive eolian deposit in the region. These observations suggest that new sand is supplied whenever vegetation cover is diminished to the extent that the Blackwater Draw Formation can be eroded, in agreement with modern observations of wind erosion in the region. We conclude, therefore, that Southern High Plains dunes are stabilized primarily due to a vegetation cover. The dunes are thus sediment-availability limited. This conclusion is consistent with the observation that, in the warmest, driest part of the region (where vegetation cover is minimal), dunes are currently active over a large area. Geochemical data indicate that Southern High Plains dunes are the most mineralogically mature (quartz rich) sands yet studied in the Great Plains, which suggests a long history of eolian activity, either in the dune fields or during deposition of the Blackwater Draw Formation.

New Mexico, Texas↗
USGS2003

Preliminary geologic map of the San Bernardino 30' x 60' quadrangle, California (includes preliminary GIS database)

The San Bernardino 30'x60' quadrangle, southern California, is diagonally bisected by the San Andreas Fault Zone, separating the San Gabriel and San Bernardino Mountains, major elements of California's east-oriented Transverse Ranges Province. Included in the southern part of the quadrangle is the northern part of the Peninsular Ranges Province and the northeastern part of the oil-producing Los Angeles basin. The northern part of the quadrangle includes the southern part of the Mojave Desert Province. Pre-Quaternary rocks within the San Bernardino quadrangle consist of three extensive, well-defined basement rock assemblages, the San Gabriel Mountains, San Bernardino Mountains, and the Peninsular Ranges assemblages, and a fourth assemblage restricted to a narrow block bounded by the active San Andreas Fault and the Mill Creek Fault. Each of these basement rock assemblages is characterized by a relatively unique suite of rocks that was amalgamated by the end of the Cretaceous and (or) early Cenozoic. Some Tertiary sedimentary and volcanic rocks are unique to specific assemblages, and some overlap adjacent assemblages. A few Miocene and Pliocene units cross the boundaries of adjacent assemblages, but are dominant in only one. Tectonic events directly and indirectly related to the San Andreas Fault system have partly dismembered the basement rocks during the Neogene, forming the modern-day physiographic provinces. Rocks of the four basement rock assemblages are divisible into an older suite of Late Cretaceous and older rocks and a younger suite of post-Late Cretaceous rocks. The age span of the older suite varies considerably from assemblage to assemblage, and the point in time that separates the two suites varies slightly. In the Peninsular Ranges, the older rocks were formed from the Paleozoic to the end of Late Cretaceous plutonism, and in the Transverse Ranges over a longer period of time extending from the Proterozoic to metamorphism at the end of the Cretaceous. Within the Peninsular Ranges a profound diachronous unconformity marks the pre-Late Cretaceous-post-Late Cretaceous subdivision, but within the Transverse Ranges the division appears to be slightly younger, perhaps coinciding with the end of the Cretaceous or extending into the early Cenozoic. Initial docking of Peninsular Ranges rocks with Transverse Ranges rocks appears to have occurred at the terminus of plutonism within the Peninsular Ranges. During the Paleogene there was apparently discontinuous but widespread deposition on the basement rocks and little tectonic disruption of the amalgamated older rocks. Dismemberment of these Paleogene and older rocks by strike-slip, thrust, and reverse faulting began in the Neogene and is ongoing. The Peninsular Ranges basement rock assemblage is made up of the Peninsular Ranges batholith and a variety of metasedimentary rocks. Most of the plutonic rocks of the batholith are granodiorite and tonalite in composition; primary foliation is common, mainly in the eastern part. Tertiary sedimentary rocks of the Los Angeles Basin crop out in the Puente and San Jose Hills along with the spatially associated Glendora Volcanics; both units span the boundary between the Peninsular Ranges and San Gabriel Mountains basement rock assemblages. The San Gabriel Mountains basement rock assemblage includes two discrete areas, the high standing San Gabriel Mountains and the relatively low San Bernardino basin east of the San Jacinto Fault. The basement rock assemblage is characterized by a unique suite of rocks that include anorthosite, Proterozoic and Paleozoic gneiss and schist, the Triassic

California↗
USGS2000

Origin of Amazon mudbanks along the northeastern coast of South America

Seismic profiles, sediment cores, and water column measurements were collected along the northeastern coast of Brazil to examine the origin of mudbanks in the Amazon coastal mud belt. These 10-60-km-long, shore-attached features previously had been observed to migrate along the 1200 km coast of the Guianas in response to wave forcing. CHIRP (3.5 kHz) seismic profiles of the shoreface and inner shelf located two mudbanks updrift of the previous eastern limit in French Guiana. 210Pb geochronology shows that these two banks are migrating to the northwest over a relict mud surface in 5-20 m water depth. The mudbanks are 3-4 m thick and are translating over a modern shoreface mud wedge deposited by previous mudbank passage in < 5 m water depth. Initial mudbank development is taking place on the intertidal and shallow subtidal mudflats at Cabo Cassipore, associated with an alongshore-accreting clinoform feature. Sediment trapping in this area is controlled by the nearshore presence of strong water column stratification produced by the enormous Amazon freshwater discharge on the shelf and by proximity to the Cassipore River estuary. Seasonal and decadal periods of sediment supply and starvation in this area likely are controlled by variations in northwest trade wind intensity. (C) 2000 Elsevier Science B.V.

Marine Geology↗
USGS2009

Climate in the dry central Andes over geologic, millenial, and interannual timescales

Over the last eight years, we have developed several paleoenvironmental records from a broad geographic region spanning the Altiplano in Bolivia (18°S–22°S) and continuing south along the western Andean flank to ca. 26°S. These records include: cosmogenic nuclide concentrations in surface deposits, dated nitrate paleosoils, lake levels, groundwater levels from wetland deposits, and plant macrofossils from urine-encrusted rodent middens. Arid environments are often uniquely sensitive to climate perturbations, and there is evidence of significant changes in precipitation on the western flank of the central Andes and the adjacent Altiplano. In contrast, the Atacama Desert of northern Chile is hyperarid over many millions of years. This uniquely prolonged arid climate requires the isolation of the Atacama from the Amazon Basin, a situation that has existed for more than 10 million years and that resulted from the uplift of the Andes and/or formation of the Altiplano plateau. New evidence from multiple terrestrial cosmogenic nuclides, however, suggests that overall aridity is occasionally punctuated by rare rainfall events that likely originate from the Pacific. East of the hyperarid zone, climate history from multiple proxies reveals alternating wet and dry intervals where changes in precipitation originating from the Atlantic may exceed 50%. An analysis of Pleistocene climate records across the region allows reconstruction of the spatial and temporal components of climate change. These Pleistocene wet events span the modern transition between two modes of interannual precipitation variability, and regional climate history for the Central Andean Pluvial Event (CAPE; ca. 18–8 ka) points toward similar drivers of modern interannual and past millennial-scale climate variability. The north-northeast mode of climate variability is linked to El Niño–Southern Oscillation (ENSO) variability, and the southeast mode is linked to aridity in the Chaco region of Argentina.

Andes↗
USGS2023

Groundwater flow model investigation of the vulnerability of water resources at Chaco Culture National Historical Park related to unconventional oil and gas development

Chaco Culture National Historical Park (CCNHP), located in northwestern New Mexico, protects the greatest concentration of Chacoan historical sites in the American Southwest. Geologically, CCNHP is located within the San Juan structural basin, which consists in part of complex Cretaceous stratigraphy and hosts a variety of energy resources. As part of a larger study to investigate the vulnerability of water resources at CCNHP related to oil and natural gas extraction activities, a MODFLOW groundwater model of the Mancos Shale and Gallup Sandstone units was created by the U.S. Geological Survey, as a part of a cooperative study with the National Park Service, to assess advective groundwater flow paths and traveltimes. The model determined that groundwater flow directions currently trend from south-southeast to north-northwest within the vicinity of CCNHP, groundwater traveltime through the Gallup Sandstone ranges from thousands to tens of thousands of years, and traveltime through the Mancos Shale may range from millions to tens of millions of years. The capture zone of the main CCNHP well (referred to as the “Chaco well”) extends to the south-southeast and ranges in width from approximately 1 to 12 miles, depending on pumping rate. Eighteen inactive hydrocarbon related wells are located within the capture zone and within 10 kilometers of the Chaco well. Given model estimates of traveltimes of groundwater in the Gallup Sandstone aquifer, advective groundwater transport to the Chaco well would take approximately 430 years from the nearest inactive hydrocarbon related wells. Differencing of historical and modern-day potentiometric surfaces of the Gallup Sandstone indicate a drop in groundwater levels between 34 and 96 feet within the CCNHP boundaries. Hydraulic fracturing, simulated as increased hydraulic conductivity zones, decreased groundwater traveltimes (from millions to thousands of years) and acted as permeable pathways from the Mancos Shale to the Gallup Sandstone.

Arizona, New Mexico↗