SEARCH · Search USGS

Results for “General Information Product”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources

USGS2022

Groundwater-level monitoring from January 17 to March 3, 2022, Hālawa area, O‘ahu, Hawai‘i

A reported fuel release in November 2021 at the Red Hill Bulk Fuel Storage Facility within the naval reservation at Red Hill led to the shutdown of several production wells in the Hālawa area, O‘ahu, Hawai‘i. Red Hill Shaft—one of the high-capacity production wells that shut down—was reactivated on January 29, 2022. Submersible pressure transducers were deployed at 20 wells in the Hālawa area to measure groundwater levels and evaluate the regional groundwater-level response to the resumption of groundwater withdrawals from Red Hill Shaft. Groundwater levels measured in wells from January 17 to March 3, 2022, ranged between 16 and 20 feet at all sites and generally between 17 and 19 feet at most sites. Average groundwater-level decreases measured in wells 10 days after the January 29, 2022, resumption of withdrawal from Red Hill Shaft ranged from about 0.1 to 0.4 foot. In general, greatest decreases in groundwater levels occurred in wells closest to Red Hill Shaft. The groundwater-level data contain uncertainty because of several potential sources of error associated with (1) the accuracy of the measuring tapes and submersible pressure transducers used, (2) the accuracy of the measuring-point altitude at the top of each well, (3) the stability of the submersible pressure transducers’ suspension depth in each well, (4) well plumbness and alignment, and (5) human error. Because of the potential sources of error, comparability of groundwater-level data may be affected. Some sources of uncertainty, including the accuracy of measuring-point altitudes, can be addressed and lead to improved accuracy and comparability of groundwater levels. Data collected for this study are available in the U.S. Geological Survey National Water Information System database.

Hawaii↗

USGS2012

Fish population and habitat analysis in Buck Creek, Washington, prior to recolonization by anadromous salmonids after the removal of Condit Dam

We assessed the physical and biotic conditions in the part of Buck Creek, Washington, potentially accessible to anadromous fishes. This creek is a major tributary to the White Salmon River upstream of Condit Dam, which was breached in October 2011. Habitat and fish populations were characterized in four stream reaches. Reach breaks were based on stream gradient, water withdrawals, and fish barriers. Buck Creek generally was confined, with a single straight channel and low sinuosity. Boulders and cobble were the dominant stream substrate, with limited gravel available for spawning. Large-cobble riffles were 83 percent of the available fish habitat. Pools, comprising 15 percent of the surface area, mostly were formed by bedrock with little instream cover and low complexity. Instream wood averaged 6—10 pieces per 100 meters, 80 percent of which was less than 50 centimeters in diameter. Water temperature in Buck Creek rarely exceeded 16 degrees Celsius and did so for only 1 day at river kilometer (rkm) 3 and 11 days at rkm 0.2 in late July and early August 2009. The maximum temperature recorded was 17.2 degrees Celsius at rkm 0.2 on August 2, 2009. Minimum summer discharge in Buck Creek was 3.3 cubic feet per second downstream of an irrigation diversion (rkm 3.1) and 7.7 cubic feet per second at its confluence with the White Salmon River. Rainbow trout ( Oncorhynchus mykiss ) was the dominant fish species in all reaches. The abundance of age-1 or older rainbow trout was similar between reaches. However, in 2009 and 2010, the greatest abundance of age-0 rainbow trout (8 fish per meter) was in the most downstream reach. These analyses in Buck Creek are important for understanding the factors that may limit fish abundance and productivity, and they will help identify and prioritize potential restoration actions. The data collected constitute baseline information of pre-dam removal conditions that will allow assessment of changes in fish populations now that Condit Dam has been removed and anadromous fish have an opportunity to recolonize Buck Creek.

Washington↗

USGS1997

Land cover mapping, fire regeneration, and scaling studies in the Canadian boreal forest with 1 km AVHRR and Landsat TM data

A multitemporal 1 km advanced very high resolution radiometer (AVHRR) land cover analysis approach was used as the basis for regional land cover mapping, fire disturbance-regeneration, and multiresolution land cover scaling studies in the boreal forest ecosystem of central Canada. The land cover classification was developed by using regional field observations from ground and low-level aircraft transits to analyze spectral-temporal clusters that were derived from an unsupervised cluster analysis of monthly normalized difference vegetation index (NDVI) image composites (April-September 1992). Quantitative areal proportions of the major boreal forest components were determined for a 821 km ?? 619 km region, ranging from the southern grasslands-boreal forest ecotone to the northern boreal transitional forest. The boreal wetlands (mostly lowland black spruce, tamarack, mosses, fens, and bogs) occupied approximately 33% of the region, while lakes accounted for another 13%. Upland mixed coniferous-deciduous forests represented 23% of the ecosystem. A SW-NE productivity gradient across the region is manifested by three levels of tree stand density for both the boreal wetland conifer and the mixed forest classes, which are generally aligned with isopleths of regional growing degree days. Approximately 30% of the region was directly affected by fire disturbance within the preceding 30-35 years, especially in the Canadian Shield Zone where large fire-regeneration patterns contribute to the heterogeneous boreal landscape. Intercomparisons with land cover classifications derived from 30-m Landsat Thematic Mapper (TM) data provided important insights into the relative accuracy of the 1 km AVHRR land cover classification. Primarily due to the multitemporal NDVI image compositing process, the 1 km AVHRR land cover classes have an effective spatial resolution in the 3-4 km range; therefore fens, bogs, small water bodies, and small patches of dry jack pine cannot be resolved within the wet conifer mosaic. Major differences in the 1-km AVHRR and 30-m Landsat TM-derived land cover classes are most likely due to differences in the spatial resolution of the data sets. In general, the 1 km AVHRR land cover classes are vegetation mosaics consisting of mixed combinations of the Landsat classes. Detailed mapping of the global boreal forest with this approach will benefit from algorithms for cloud screening and to atmospherically correct reflectance data for both aerosol and water vapor effects. We believe that this 1 km AVHRR land cover analysis provides new and useful information for regional water, energy, carbon, and trace gases studies in BOREAS, especially given the significant spatial variability in land cover type and associated biophysical land cover parameters (e.g., albedo, leaf area index, FPAR, and surface roughness). Multiresolution land cover comparisons (30 m, 1 km, and 100 km grid cells) also illustrated how heterogeneous landscape patterns are represented in land cover maps with differing spatial scales and provided insights on the requirements and challenges for parameterizing landscape heterogeneity as part of land surface process research.

Journal of Geophysical Research D: Atmospheres↗

USGS2010

The principal rare earth elements deposits of the United States: A summary of domestic deposits and a global perspective

The rare earth elements (REE) are fifteen elements with atomic numbers 57 through 71, from lanthanum to lutetium ('lanthanides'), plus yttrium (39), which is chemically similar to the lanthanide elements and thus typically included with the rare earth elements. Although industrial demand for these elements is relatively small in tonnage terms, they are essential for a diverse and expanding array of high-technology applications. REE-containing magnets, metal alloys for batteries and light-weight structures, and phosphors are essential for many current and emerging alternative energy technologies, such as electric vehicles, energy-efficient lighting, and wind power. REE are also critical for a number of key defense systems and other advanced materials. Section 843 of the National Defense Authorization Act for Fiscal Year 2010, Public Law 111-84, directs the Comptroller General to complete a report on REE materials in the defense supply chain. The Office of Industrial Policy, in collaboration with other U.S. Government agencies, has initiated (in addition to this report) a detailed study of REE. This latter study will assess the Department of Defense's use of REE, as well as the status and security of domestic and global supply chains. That study will also address vulnerabilities in the supply chain and recommend ways to mitigate any potential risks of supply disruption. To help conduct this study, the Office of Industrial Policy asked the U.S. Geological Survey (USGS) to report on domestic REE reserves and resources in a global context. To this end, the enclosed report is the initial USGS contribution to assessing and summarizing the domestic REE resources in a global perspective. In 2009, the Mineral Resources Program of the USGS organized a new project under the title Minerals at Risk and For Emerging Technologies in order to evaluate mineral resource and supply issues of rare metals that are of increasing importance to the national economy. Leaders and members of this project, with the assistance of the USGS National Minerals Information Center, prepared the enclosed USGS report on domestic REE resources. The USGS Mineral Resources Program has investigated domestic and selected foreign REE resources for many decades, and this report summarizes what has been learned from this research. The USGS National Minerals Information Center (formerly Minerals Information Team) has monitored global production, trade, and resources for an equally long period and is the principal source of statistics used in this report. The objective of this study is to provide a nontechnical overview of domestic reserves and resources of REE and possibilities for utilizing those resources. At the present time, the United States obtains its REE raw materials from foreign sources, almost exclusively from China. Import dependence upon a single country raises serious issues of supply security. In a global context, domestic REE resources are modest and of uncertain value; hence, available resources in traditional trading partners (such as Canada and Australia) are of great interest for diversifying sources of supply. This report restates basic geologic facts about REE relevant to assessing security of supply, followed by a review of current United States consumption and imports of REE, current knowledge of domestic resources, and possibilities for future domestic production. Further detail follows in a deposit-by-deposit review of the most significant domestic REE deposits (see index map). Necessary steps to develop domestic resources are discussed in a separate section, leading into a review of current domestic exploration and a discussion of the value of a future national mineral resource assessment of REE. The report also includes an overview of known global REE resources and discusses the reliability of alternative foreign sources of REE.

Scientific Investigations Report↗

USGS2008

GIS Representation of Coal-Bearing Areas in Africa

The African continent contains approximately 5 percent of the world's proven recoverable reserves of coal (World Energy Council, 2007). Energy consumption in Africa is projected to grow at an annual rate of 2.3 percent from 2004 through 2030, while average consumption in first-world nations is expected to rise at 1.4 percent annually (Energy Information Administration, 2007). Coal reserves will undoubtedly continue to be part of Africa's energy portfolio as it grows in the future. A review of academic and industrial literature indicates that 27 nations in Africa contain coal-bearing rock. South Africa accounts for 96 percent of Africa's total proven recoverable coal reserves, ranking it sixth in the world. This report is a digital compilation of information on Africa's coal-bearing geology found in the literature and is intended to be used in small scale spatial investigations in a Geographic Information System (GIS) and as a visual aid for the discussion of Africa's coal resources. Many maps of African coal resources often include points for mine locations or regional scale polygons with generalized borders depicting basin edges. Point locations are detailed but provide no information regarding extent, and generalized polygons do not have sufficient detail. In this dataset, the polygons are representative of the actual coal-bearing lithology both in location and regional extent. Existing U.S. Geological Survey (USGS) digital geology datasets provide the majority of the base geologic polygons. Polygons for the coal-bearing localities were clipped from the base geology that represented the age and extent of the coal deposit as indicated in the literature. Where the 1:5,000,000-scale geology base layer's ages conflicted with those in the publications, polygons were generated directly from the regional African coal maps (1:500,000 scale, approximately) in the published material. In these cases, coal-bearing polygons were clipped to the literature's indicated coal extent, without regard to the underlying geology base or topographic constraints. Indication of the presence of African coal is based on multiple sources. However, the quality of the sources varies and there is often disagreement in the literature. This dataset includes the rank, age, and location of coal in Africa as well as the detailed source information responsible for each coal-bearing polygon. The dataset is not appropriate for use in resource assessments of any kind. Attributes necessary for tasks, such as number of coal seams, thickness of seams, and depth to coal are rarely provided in the literature and accordingly not represented in this data set. Small-scale investigations, representations and display uses are most appropriate for this product. This product is the first to show coal distribution as bounded by actual geologic contacts for the entire African continent. In addition to the spatial component of this dataset, complete references to source material are provided for each polygon, making this product a useful first step resource in African coal research. Greater detail regarding the creation of this dataset as well as the sources used is provided in the metadata file for the Africa_coal.shp file.

Open-File Report↗

USGS1996

Comparison of alternative spatial resolutions in the application of a spatially distributed biogeochemical model over complex terrain

Spatially distributed biogeochemical models may be applied over grids at a range of spatial resolutions, however, evaluation of potential errors and loss of information at relatively coarse resolutions is rare. In this study, a georeferenced database at the 1-km spatial resolution was developed to initialize and drive a process-based model (Forest-BGC) of water and carbon balance over a gridded 54976 km2 area covering two river basins in mountainous western Oregon. Corresponding data sets were also prepared at 10-km and 50-km spatial resolutions using commonly employed aggregation schemes. Estimates were made at each grid cell for climate variables including daily solar radiation, air temperature, humidity, and precipitation. The topographic structure, water holding capacity, vegetation type and leaf area index were likewise estimated for initial conditions. The daily time series for the climatic drivers was developed from interpolations of meteorological station data for the water year 1990 (1 October 1989-30 September 1990). Model outputs at the 1-km resolution showed good agreement with observed patterns in runoff and productivity. The ranges for model inputs at the 10-km and 50-km resolutions tended to contract because of the smoothed topography. Estimates for mean evapotranspiration and runoff were relatively insensitive to changing the spatial resolution of the grid whereas estimates of mean annual net primary production varied by 11%. The designation of a vegetation type and leaf area at the 50-km resolution often subsumed significant heterogeneity in vegetation, and this factor accounted for much of the difference in the mean values for the carbon flux variables. Although area wide means for model outputs were generally similar across resolutions, difference maps often revealed large areas of disagreement. Relatively high spatial resolution analyses of biogeochemical cycling are desirable from several perspectives and may be particularly important in the study of the potential impacts of climate change.

Ecological Modelling↗

USGS2014

Mineral resource of the month: vermiculite

Vermiculite comprises a group of hydrated, laminar magnesium-aluminum-iron silicate minerals resembling mica. They are secondary minerals, typically altered biotite, iron-rich phlogopite or other micas or clay-like minerals that are themselves sometimes alteration products of amphibole, chlorite, olivine and pyroxene. Vermiculite deposits are associated with volcanic ultramafic rocks rich in magnesium silicate minerals, and flakes of the mineral range in color from black to shades of brown and yellow. The crystal structure of vermiculite contains water molecules, a property that is critical to its processing for common uses. Using a process called exfoliation-in which vermiculite flakes are heated to 900 degrees Celsius or higher, causing water within the flakes to flash to steam and expand-crude vermiculite ore is processed into particles that are eight to 20 times larger. The resulting lightweight material is chemically inert and fire resistant, with low density and low thermal conductivity. It is also odorless, has high liquid absorption capacity and catalytic properties. Because it is lightweight and thermally insulating, vermiculite is used in general building plasters and concrete products, alone or combined with other lightweight aggregates such as perlite. Special plasters, in which vermiculite is combined with binders like gypsum or portland cement, fillers or other additives, provide fire protection and soundproofing. As insulation, exfoliated vermiculite, sometimes treated with a water repellent, is used to fill pores and cavities in masonry construction and hollow blockwork to enhance acoustic properties, fire rating and insulation performance. Exfoliated vermiculite can also be used to produce refractory and insulation concretes and mortars, and to make high-temperature binders for construction materials, gaskets, specialty papers, textiles and vehicle brake linings. Finer grades of exfoliated vermiculite can be used to produce various shapes of insulation pellets, high-temperature insulation, as a primary component in cementitious coatings, and as a filler in inks, paints, plastics and other materials. Vermiculite can absorb liquids such as fertilizers, herbicides and insecticides, which can then be transported as free-flowing solids. It is used in the fertilizer and pesticide markets because of its ability to act as a bulking agent, carrier and extender. In horticulture, exfoliated vermiculite improves soil aeration and moisture retention, and when mixed with peat or other composted materials, such as pine bark, vermiculite produces a good growing medium for plants. As a soil conditioner, exfoliated vermiculite improves aeration in clay-rich soils and water retention in sandy soils, while reducing the likelihood of compaction, cracking and crusting of the soil. For more information on the commercial use of vermiculite, visit minerals.usgs.gov/minerals/ .

Earth↗

USGS1958

Suggestions to authors of the reports of the United States Geological Survey

Knowledge acquired by the Geological Survey through programs of research and investigations has no value to the public if it remains in office files or in the minds of the scientists and engineers who did the work. The full discharge of the Survey's responsibilities is attained only by making its acquired knowledge available promptly and effectively to all people who will find it of interest and use. And, to insure effectiveness, reports must be not only accurate but so clearly and simply written that they are easy to read and understand. Efforts by the Geological Survey to attain high quality in reports are necessarily group efforts. The largest contribution is made by the author, who has assembled facts, has worked out ideas to explain them, and has a direct personal interest in making the facts and ideas clearly and effectively known. The Geological Survey encourages that interest, recognizing that it is an essential ingredient of the high morale of the members of the Survey. Authors should keep in mind, however, that the Survey has a proprietary interest in all their manuscript reports and as proprietor may dispose of the reports, or require that they be changed before publication, as it sees fit. The Survey generally exercises its proprietary interest only to the extent of seeing that a report is scientifically and technically sound, will reach the proper audience, and will reflect credit on both the Survey and the author. To these ends, each report is reviewed by the author's fellow workers, supervisors, and staff officials, who bring to bear upon it their specialized knowledge, skill, judgement to assure a sound product. In its final form each Survey report is that product of team effort in which many persons do their share -- even though most of them remain anonymous. There is no easy way to prepare reports of high quality, any more than there is an easy means of carrying out research to sure and outstanding conclusions. Each task calls for intensive thinking and for preserving work. The author bears the primary responsibility and correspondingly faces the most difficult task. To aid him is the chief purpose of this volume. The subject matter of this volume is arranged under several principal headings. First, a summary is given of the Survey's publications: the historical basis for them, statistics as to what has been issued in the periods 1879-1957, and a list and description of the several series of reports and maps in which material is being published. Next are outlined successive steps that the author will normally take from the start of a project to his final proofreading of the text and illustrations. Under the third broad heading is brought together much detailed information about the form and content of reports. The fourth part of this volume is devoted to advice on expression -- what to seek and what to avoid. A fifth major part of this volume bears on the most common questions of typographic style that affect Survey publications. The final sections of the volume give instructions for typing manuscript copy and correcting the galley and page proofs; also they include a few useful tables and a discussion of the purpose and content of press releases.

Report↗

USGS2025

Factors influencing daily nest survival rates of Aleutian terns in the Kodiak Archipelago, Alaska

The Aleutian tern ( Onychoprion aleuticus ) is a species of high conservation concern in Alaska, USA, owing to large declines at known breeding locations since the 1960s. The small population size and ephemeral behavior of this species have limited the collection of basic biological information and hindered the identification of potential drivers of this decline. Significant unknowns include the factors, and their relative importance, influencing nest survival. To investigate these questions, we estimated daily nest survival (DNS) for 148 nests from 5 breeding colonies during 2017 to 2020 in the Kodiak Archipelago, Alaska with 105 monitored using remote cameras. We used the nest survival model in program MARK to estimate DNS rates as a function of colony location, year, within-season time trends, vegetation cover and height, and 6 daily weather covariates. Our top model suggested that DNS rates increased with vegetation height, decreased as the season progressed, and included a significant interaction between year and colony. Average nest success (i.e., percent chance that a nest survived to hatch) over the 22-day incubation period varied by colony but was generally very low, averaging 1.2% (95% CI = 0–11%) in 2017–2018 to 14% (95% CI = 0.1–38%) in 2019–2020 across all colonies. The importance of year in the model suggests that a large-scale annual driver, like food availability, may have played an important role in this species' breeding success. A severe marine heatwave was present in the Gulf of Alaska during 2014–2016 and our results suggest that some effects of this anomalous event, such as reduced prey availability, lingered even after temperatures returned to normal. Additionally, the variation in DNS across colony locations indicated that local factors, such as predation pressure, may also drive significant variation in Aleutian tern productivity. These findings suggest that a combination of local factors and climate change may be important drivers of the >90% decline in Alaska's breeding population of Aleutian terns.

Alaska↗

USGS1979

Summary appraisals of the nation's ground-water resources – Lower Mississippi region

The Lower Mississippi Region comprises an area of 102,400 square miles (265,200 square kilometers). Almost all this area is in the physiographic province known as the Gulf Coastal Plain. Three small areas on the northwest boundary of the region are in the Interior Highlands. The Lower Mississippi Region has an abundance of ground water. The geologic structure in that part of the region within the Coastal Plain is an elongated trough which has been filled with permeable materials, resulting in vast subsurface reservoirs. Except in local areas where continued large withdrawals have caused significant water-level declines, these reservoirs are full. Recharge to the region's aquifers is primarily from rainfall. Annual rainfall in most of the region is well distributed throughout the year and is sufficient to satisfy evapotranspiration requirements and still provide recharge to the aquifers. An estimated 844 billion cubic feet (24 billion cubic meters) of fresh ground water is available for withdrawal annually in the region. Only about one-third of this quantity is being utilized. Therefore, on this basis alone, the region still has much potential for ground-water development. The Coastal Plain aquifers within the Lower Mississippi Region contain large reserves of saltwater in the downdip limits of the aquifers. The quantity of saltwater in the region is several times that of freshwater. As desalinization techniques are developed and as more uses are found for saltwater, this reserve could become an important source of water for the region. At present (1976), the most productive and potentially productive aquifers or aquifer systems in the region are the Mississippi River valley alluvial aquifer of Quaternary age and the Sparta Sand and the Memphis aquifer (Memphis Sand in Tennessee) of Tertiary age. The Sparta Sand and the Memphis aquifer are heavily utilized and have shown significant water-level declines. However, selected well hydrographs indicate that water levels may be stabilizing under present pumping conditions. The Mississippi River valley alluvial aquifer is the most extensive high-yielding aquifer in the region; yields of several thousand gallons per minute may be obtained at depths of less than 200 feet (61 meters). To obtain maximum benefit from the vast quantities of ground water in the region, adequate attention must be given to the effects of proposed development upon the ground-water regime. Knowledge of the geologic structure and hydraulic properties of the aquifer systems is essential to an evaluation of the effects of such development. Some studies have been made in sufficient detail to provide this knowledge, but additional studies are needed. Activities that could cause significant changes in the groundwater regime should be undertaken only after all available information has been considered. Failure to seek out and use such information may result in inefficient development of the groundwater resource and, in some instances, degradation of the quality of the resource. Some changes always result from ground-water development. The possible changes can be grouped into three categories: hydraulic, water quality, and those affecting the physical framework of the aquifers. Generally, they are small in magnitude and areal extent. Because these changes occur below the ground surface, they are unknown to the ground-water user unless they noticeably affect the quantity or quality of water produced or cause obvious physical effects, such as land subsidence. Great advances have been made in hydrologic technology in recent years. Predictive models have been developed that make it possible for the hydroiogist to simulate aquifer responses to proposed development or other stresses. These models would be invaluable tools in progressive water-resources planning and management.

Arkansas, Kentucky, Louisiana, Mississippi, Missou↗

USGS2005

Water withdrawals for irrigation, municipal, mining, thermoelectric-power, and drainage uses in Arizona outside of active management areas, 1991-2000

Economic development in Arizona is largely influenced by access to adequate water supplies owing to the State's predominantly semiarid to arid climate. Water demand is met by pumping ground water from aquifers or by conveying surface water through a system of reservoirs and canals. Water-withdrawal data provide important information on how water demand affects the State's water resources. Information on water withdrawals also can help planners and managers assess the effectiveness of water-management policies, regulations, and conservation activities. This report includes water-withdrawal data for irrigation, municipal, mining, thermoelectric-power, and drainage uses for 1991-2000, and describes the methods used to collect, compile, and estimate the data. Data are reported for the Arizona Department of Water Resources ground-water basins outside of Active Management Areas. Because of the climate, ground water and surface water are used to irrigate nearly all agricultural fields in Arizona. Irrigation accounted for the largest use of water in the study area during 1991-2000. The amount of water withdrawn for irrigation varies greatly from year to year for some of the basins, primarily because of differences in the consumptive water requirement for different crops and because of changes in irrigated acreage. The population of Arizona increased about 35 percent from 1991 to 2000-from about 3.79 million in 1991 to about 5.13 million in 2000. Correspondingly, water withdrawal for municipal use increased steadily in most of the basins during 1991-2000. Ground-water withdrawals for mining did not show any consistent trends during 1991-2000. Increases and decreases in withdrawals for mining were most likely due to variations in mineral production. Mineral prices and competition from mining in other States and foreign countries probably result in annual increases or decreases in mineral production in Arizona. Between 1991 and 2000, ground-water withdrawals for thermoelectric-power generation generally increased owing to an increase in production of electricity. Ground-water withdrawals for drainage of agricultural lands in the Lower Gila and Yuma Basins varied irregularly from year to year. Annual total water withdrawals are not presented in this report because for some years irrigation values for some of the basins are reported as "less than 1,000 acre-feet," and municipal and mining values for some of the basins are reported as "less than 300 acre-feet."

Arizona↗

USGS2008

Mercury, trace elements and organic constituents in atmospheric fine particulate matter, Shenandoah National Park, Virginia, USA: A combined approach to sampling and analysis

Compliance with U.S. air quality regulatory standards for atmospheric fine particulate matter (PM 2.5 ) is based on meeting average 24 hour (35 μ m −3 ) and yearly (15 μg m −3 ) mass‐per‐unit‐volume limits, regardless of PM 2.5 composition. Whereas this presents a workable regulatory framework, information on particle composition is needed to assess the fate and transport of PM 2.5 and determine potential environmental/human health impacts. To address these important non‐regulatory issues an integrated approach is generally used that includes (1) field sampling of atmospheric particulate matter on filter media, using a size‐limiting cyclone, or with no particle‐size limitation; and (2) chemical extraction of exposed filters and analysis of separate particulate‐bound fractions for total mercury, trace elements and organic constituents, utilising different USGS laboratories optimised for quantitative analysis of these substances. This combination of sampling and analysis allowed for a more detailed interpretation of PM 2.5 sources and potential effects, compared to measurements of PM 2.5 abundance alone. Results obtained using this combined approach are presented for a 2006 air sampling campaign in Shenandoah National Park (Virginia, USA) to assess sources of atmospheric contaminants and their potential impact on air quality in the Park. PM 2.5 was collected at two sampling sites (Big Meadows and Pinnacles) separated by 13.6 km. At both sites, element concentrations in PM 25 were low, consistent with remote or rural locations. However, element/Zr crustal abundance enrichment factors greater than 10, indicating anthropogenic input, were found for Hg, Se, S, Sb, Cd, Pb, Mo, Zn and Cu, listed in decreasing order of enrichment. Principal component analysis showed that four element associations accounted for 84% of the PM 2.5 trace element variation; these associations are interpreted to represent: (1) crustal sources (Al, REE); (2) coal combustion (Se, Sb), (3) metal production and/or mobile sources (Mo, Cd, Pb, Cu, Zn) and (4) a transient marine source (Sr, Mg). Concentrations of Hg in PM 2.5 at background levels in the single pg m −3 were shown by collection and analysis of PM 2.5 on filters and by an automated speciation analyser set up at the Big Meadows air quality site. The speciation unit revealed periodic elevation of reactive gaseous mercury (RGM) that co‐occurred with peaks in SO 2 , indicating an anthropogenic source. GC/MS total ion current chromatograms for the two sites were quite similar indicating that organic signatures were regional in extent and/or that the same compounds were present locally at each site. Calculated carbon preference index values for n ‐alkanes indicated that plant waxes rather than anthropogenic sources, were the dominant alkane source. Polycyclic aromatic hydrocarbons (PAHs) were detected, with a predominance of non‐alkylated, and higher molecular weight PAHs in this fraction, suggestive of a combustion source (fossil fuel or forest fires).

Virginia↗

USGS1985

Selected test-well data from the MX-missile siting study, Tooele, Juab, Millard, Beaver, and Iron Counties, Utah

This report contains well data collected from 1979 to 1983 in a part of the Great Basin in western Utah (fig. 1). The area is characterized by a series of generally north-trending mountain ranges separated by alluviumfilled basins that are partially filled with sedimentary deposits eroded from the adjacent mountains and lacustrine sediments deposited by Lake Bonneville. Most of the intermountain basins are elongated in the northward direction, but some are almost equidimensional. This report was prepared as part of the Great Basin Regional AquiferSystem Analysis (RASA) program. The report is intended to make well data from the MX-missile siting study readily available to water-resource managers and the general public. It includes well data obtained in areas for which little or no such data have been published previously. Well-drilling and well-completion data were compiled by Ertec, Inc. (formerly Fugro National, Inc.) under contract with the U. S. Air Force. Those data along with aquifer test data, geophysical logs, and drillers1 or geologists1 logs were obtained from Ertec, Inc. under an agreement with the U.S. Air Force. The authors thank the officials of both Ertec, Inc. and the U.S. Air Force for their helpful cooperation. The U.S. Geological Survey obtained accurate locations of the test wells (pi. 1) and accurate water-level measurements in those wells (table 1). Chemical analyses of water samples collected from several of the test wells drilled in the Sevier Desert have been published in a report by Enright and Holmes (1982, table 5). Test drilling for the MX-missile siting study consisted of two parts, the verification phase and the water-resources phase. The verification jhase was designed to obtain information necessary for the design and construction of the MX-basing system. Numerous small diameter wells were bored with depths ranging from 92 to 205 feet. Two-inch diameter JVC casing with the bottom 20 feet perforated was installed in each borehole. The water-resources phase was designed to determine ground-water availibility and to estimate the effects of ground-water withdrawals required for the construction of the MX-basing system. Six large-diameter production test wells were drilled along with associated small-diameter observation wells. Depths ranged from 310 to 1,399 feet. Lithologic logs for selected production test wells or associated observation wells are listed in table 2. Geophysical logs and aquifer test data are available in the files of the U. S. Geological Survey, as indicated in table 1.

Utah↗

USGS2021

Hydrogeologic framework, water levels, and selected contaminant concentrations at Valmont TCE Superfund Site, Luzerne County, Pennsylvania, 2020

The Valmont TCE Superfund Site, Luzerne County, Pennsylvania is underlain by fractured and folded sandstones and shales of the Pottsville and Mauch Chunk Formations, which form a fractured-rock aquifer recharged locally by precipitation. Industrial activities at the former Chromatex Plant resulted in trichloroethene (TCE) contamination of groundwater at and near the facility, which was identified in 1987 and led to listing as a Superfund site by the U.S. Environmental Protection Agency (EPA) in 1989. To address the problem of TCE concentrations in nearby residential wells that exceed the maximum contaminant level (MCL) of 5 micrograms per liter (μg/L), alternate water supplies were provided. A 2015 review of initial characterization and subsequent remediation by the EPA identified the need for an updated understanding of the complex hydrogeology and the conceptual site model. Additional contaminants present in groundwater at the site include some other volatile organic compounds (VOCs) and per- and polyfluoroalkyl substances (PFAS), predominantly consisting of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) present in concentrations that exceeded the EPA Health Advisory (HA) level of 5 nanograms per liter (ng/L) for combined PFOA and PFOS. In response to a request from the EPA in 2019, the U.S. Geological Survey (USGS) prepared cross sections and maps to provide more information about the hydrogeologic framework at and near the site and assist in improving the conceptual site model using water level and contaminant data collected by the EPA in 2020. The cross sections present lithologic correlations from available geophysical logs collected in wells from 2002 to 2014; they show alternating intervals of relatively elevated and reduced natural gamma activity that correspond to changes in lithology, with water-bearing zones and well screens commonly located at lithologic contacts, sometimes near thin coal seams. Water-bearing zones commonly are associated with fractures at or near lithologic contacts but also may be associated with fractures at or near apparent faulting. Recent (March 2020) water-level data shown on cross sections and maps indicate large downward vertical gradients and apparent radial gradients laterally to the northeast, northwest, and southwest that generally following topography. Recent (February to March 2020) data for TCE groundwater concentration shown on cross sections and maps indicate the highest TCE concentrations (greater than 3,000 μg/L and as much as 75,000 μg/L) and combined PFOA and PFOS concentrations (greater than 1,000 ng/L and up to at least 2,350 ng/L) are from shallow (less than 60 feet [ft] below land surface [bls]) and intermediate depth (60 to 100 ft bls) wells near the center of the former Chromatex Plant. TCE and PFAS (as combined PFOA and PFOS) contamination is present at greater depths, as much as 304 ft bls, as evidenced by samples collected from one well (a reconstructed former production well) near the plant, that contained concentrations of about 240 μg/L and 508 ng/L, respectively. The 2020 data also indicate that TCE and PFAS concentrations which exceed drinking-water MCL or HA levels are present in groundwater depths of less than 200 ft in an area that extends predominantly in a northeast direction from the former Chromatex Plant, and is apparently influenced by hydraulic gradients, lithology, and geologic structure.

Pennsylvania↗

USGS2024

Wind River Subbasin Restoration Annual Report of USGS Activities January 2021 through December 2022

We sampled juvenile wild Steelhead Trout Oncorhynchus mykiss in headwater streams of the Wind River, WA, to characterize population attributes and investigate life-history metrics, particularly migratory patterns, and early life-stage survival. We used passive integrated transponder (PIT) tagging and a series of instream PIT-tag interrogation systems (PTISs) to track juveniles and adults. The Wind River subbasin is considered a wild Steelhead refuge by Washington Department of Fish and Wildlife (WDFW). No hatchery Steelhead Trout have been released in the Wind River subbasin since 1997, and hatchery adults are estimated at less than one percent of spawners in most years. Over twenty years of Steelhead Trout status and trend monitoring and research in the subbasin is contributing to understanding of population response to numerous restoration actions in the subbasin, including removal of Hemlock Dam from Trout Creek in 2009, which had an outdated adult ladder and contributed to increased water temperatures reducing performance of juvenile Steelhead Trout. Data from our study, and companion work by Washington Department of Fish and Wildlife, are contributing to Bonneville Power Administrations (BPA) Research, Monitoring, and Evaluation (RM&E) Program Strategy of Fish Population Status Monitoring (https://www.cbfish.org/ProgramStrategy.mvc/Index). Specifically, this work addresses the sub-strategies of 1) Assessing the Status and Trends of Diversity of Natural Origin Fish Populations and Uncertainties Research regarding differing life histories of a wild Steelhead Trout population, 2) Assessing the Status and Trend of Adult Natural Origin Fish Populations, and 3) Monitoring and Evaluating the Effectiveness of Tributary Habitat Actions Relative to Environmental, Physical, or Biological Performance Objectives. During summer and fall 2021 and 2022, we PIT-tagged 1,889 and 1,391 Steelhead parr (age-0 and age-1), respectively, in the Trout Creek and upper Wind River watersheds. Age-0 parr were at lower densities in 2022 than many years due to a poor return of adult Steelhead spawners in 2022. Steelhead Trout parr were recaptured and detected through repeat headwater sampling, smolt trap operations, and instream PTISs and Columbia River PIT-tag detection infrastructure. We maintained, and upgraded in 2022, a series of six instream PTISs to monitor movement of tagged Steelhead Trout parr, smolts, and adults, providing data to population assessments, and life-cycle research and modeling. We continue to improve our PTISs in the Wind River subbasin. The improvements in siting and addition of grid power to the upper Wind River PTIS (site code WRU, rkm 27.6) during 2016 and 2017, and the addition of the Mine Reach site (site code MIN, rkm 36.0) have much improved PIT-tagged fish monitoring in the upper Wind River watershed. The paired PTIS design in the upper Wind River watershed (sites WRU and MIN) matches that in the Trout Creek watershed (sites TRC, rkm 2.0; and TC4, rkm 11.5) and will allow comparisons of Steelhead Trout population metrics between the two watersheds as response to Hemlock Dam removal continues and future restoration efforts occur in Trout Creek. During summer 2022, we upgraded three PTISs with new transceivers and new or reconfigured antennas. We replaced the Biomark 1001 Multiplexing Transceivers with Biomark MTS IS1001 Master Controller and individual IS1001 Transceivers at WRU, TRC (Trout Creek, rkm 2.0), and TC4 (Trout Creek at 43 Road Bridge, rkm 11.5). These new transceivers and antennas will improve detection performance due to increased read range and decreased susceptibility to noise. We also installed an additional IS1001 Transceiver and 11-foot antenna at WRA in summer 2021 to increase cross-channel and water column coverage. Detection data from PIT-tagged adult Steelhead Trout at PTISs allow assessment of adult escapement to tributary watersheds within the Wind River subbasin. Adult Steelhead Trout detection efficiency estimates at our primary PTIS in Trout Creek have been greater than 99 percent during six of the past eight years and have exceeded 97% at our primary PTIS in the Wind River during seven of the past eight years. Adult escapement estimates to tributary watersheds are helping us evaluate the efficacy of the 2009 removal of Hemlock Dam from rkm 2.0 of Trout Creek. The dam had potential negative effects on Steelhead Trout populations in Trout Creek due to hydrologic impairment, increased temperatures, and adult passage issues. Hemlock Dam was laddered for adult passage, but not to modern standards, which likely resulted in avoidance by some adult Steelhead Trout. Detections at the instream PTISs have demonstrated trends of age-0 and age-1 parr emigration from natal areas during summer and fall, in addition to the expected movement of parr and smolts in spring. We have estimated that from 15 to 51% of parr tagged as age-0 fish in headwater areas make downstream migrations at age 1 for additional rearing. Downstream movement occurs primarily during spring but also in fall. We have estimated that up to 27% of Steelhead Trout parr, tagged as age-1 fish, make downstream migrations during fall. Fall migration of age-1 parr has been more common in the upper Wind River watershed than the Trout Creek watershed. These findings raise questions about where parr most successfully rear and whether migrations are density- or habitat-quality driven. Broader monitoring programs would give a more comprehensive understanding of juvenile Steelhead Trout production and rearing and contributions to adult recruitment from varied rearing strategies. Repeat sampling at consistent locations in the subbasin has enabled assessment of juvenile Steelhead Trout growth patterns. Growth rates (relative change in weight) of age-0 PIT-tagged parr during summer were similar across the subbasin, though slightly lower in the Trout Creek watershed. The greatest summer growth rate was in the mainstem of the Wind River (rkm 37 and 41). Summer growth rates were lower for age-1 parr in the Trout Creek watershed than the upper Wind River watershed. Yearly relative growth was similar across the subbasin for both age-0 and age-1 tagged parr. Lower Layout Creek had the highest yearly growth rate of parr from age-0 to age-1. Mainstem Wind River (rkm 37) had the highest yearly growth rate of parr from age-1 to age-2. Non-native Brook Trout Salvelinus fontinalis are present in the subbasin, chiefly the Trout Creek watershed, and repeat sampling provides an index of their prevalence. Mean percent-of-catch that is Brook Trout, at four sample sites in Trout Creek, has declined from the period 1998 2003 to the period 2011 2022. Percent-of-catch and number of Brook Trout at the Trout Creek sites from 2011 through 2022 has generally declined, though both metrics have been somewhat variable. Evaluation and planning of habitat restoration efforts are critical to ensure efficient use of money and resources. Assessing Steelhead Trout life history variation in the Wind River subbasin will inform research and tracking of many populations and help inform habitat restoration and water allocation planning. Movement of Steelhead Trout parr from natal areas to other rearing areas raises questions regarding juvenile abundance, origin, and habitat use within watersheds. Improved PTISs and focused PIT-tagging of age-0 and age-1 Steelhead Trout parr allow investigation of such questions. Increasingly detailed viable salmonid population information, such as that provided by PIT-tagging and instream PTIS networks like those in the Wind River, can provide data to inform fisheries policy and management and understand life-history strategies and limiting factors. Such efforts also enable assessment of long-term effects of habitat restoration actions such as the removal of Hemlock Dam on Trout Creek, and the proposed Stage-0 restoration effort for upper Trout Creek, which would be a large-scale effort to reset sections of stream within their floodplain, restoring connectivity and interaction with surrounding landscape.

Report↗

USGS1982

Thermal regime of permafrost at Prudhoe Bay, Alaska

Temperature measurements through permafrost in the oil field at Prudhoe Bay, Alaska, combined with laboratory measurements of the thermal conductivity of drill cuttings permit an evaluation of in situ thermal properties and an understanding of the general factors that control the geothermal regime. A sharp contrast in temperature gradient at ~600 m represents a contrast in thermal conductivity caused by the downward change from interstitial ice to interstitial water at the base of permafrost under near steady-state conditions. Interpretation of the gradient contrast in terms of a simple model for the conductivity of an aggregate yields the mean ice content and thermal conductivities for the frozen and thawed sections (8.1 and 4.7 mcal/cm sec ?C, respectively). These results yield a heat flow of ~1.3 HFU which is similar to other values on the Alaskan Arctic Coast; the anomalously deep permafrost is a result of the anomalously high conductivity of the siliceous ice-rich sediments. Curvature in the upper 160 m of the temperature profiles represents a warming of ~1.8?C of the mean surface temperature, and a net accumulation of 5-6 kcal/cm 2 by the solid earth surface during the last 100 years or so. Rising sea level and thawing sea cliffs probably caused the shoreline to advance tens of kilometers in the last 20,000 years, inundating a portion of the continental shelf that is presently the target of intensive oil exploration. A simple conduction model suggests that this recently inundated region is underlain by near-melting ice-rich permafrost to depths of 300-500 m; its presence is important to seismic interpretations in oil exploration and to engineering considerations in oil production. With confirmation of the permafrost configuration by offshore drilling, heat-conduction models can yield reliable new information on the chronology of arctic shorelines.

Open-File Report↗

USGS2017

Natural resource inventory and monitoring for Ulaan Taiga Specially Protected Areas—An assessment of needs and opportunities in northern Mongolia

Between 1997 and 2011, Mongolia established three specially protected areas in the north-central part of the country to protect various high-value resources. These areas are jointly referred to as the Ulaan Taiga Specially Protected Areas. In accordance with the goals of the draft general management plan, this report identifies options for initiating an inventory and monitoring program for the three protected areas. Together, the three areas comprise over 1.5 million hectares of mountainous terrain west of Lake Hovsgol and bordering the Darkhad Valley. The area supports numerous rare ungulates, endangered fish, and over 40 species of threatened plants. Illegal mining, illegal logging, and poaching pose the most immediate threats to resources. As a first step, a review of published literature would inform natural resource management at the Ulaan Taiga Specially Protected Areas because it would inform other inventories. Vegetation classification and mapping also would inform other inventory efforts because the process incorporates geographic analysis to identify environmental gradients, fine-scale sampling that captures species composition and structure, and landscape-scale results that represent the variety and extent of habitats for various organisms. Mapping using satellite imagery reduces the cost per hectare. Following a determination of existing knowledge, field surveys of vertebrates and vascular plants would serve to build species lists and fill in gaps in existing knowledge. For abiotic resources, a focus on monitoring air quality, evaluating and monitoring water quality, and assembling and storing weather data would provide information for correlating resource response status with changing environmental conditions. Finally, we identify datasets that, if incorporated into a geographic information system, would inform resource management. They include political boundaries, infrastructure, topography, surficial geology, hydrology, fire history, and soils. In terms of tracking high-value resources, vegetation monitoring at the plot scale would provide a basis for detecting change in such characteristics as plant species composition, vegetation structure, and productivity that are associated with landscape-scale factors such as climate change or biotic interactions. Continued population monitoring of rare ungulates, particularly argali or wild sheep ( Ovis ammon ), would provide information on how populations are responding to natural and anthropogenic stressors. Siberian taimen ( Hucho taimen ) also is an important monitoring target given ongoing threats of poaching and climate change.

Ulaan Taiga Specially Protected Areas↗

USGS2015

Geologic map of Alaska

Summary This map and associated digital databases are the result of compilation and interpretation of published and unpublished 1:250,000-scale and limited 1:500,000- to 1:63,360-scale maps. Covering the entire state of Alaska, it reflects more than a century of work by a host of geologists and almost two decades of compilation work. There are two versions of the map: a detailed digital version, and a simplified, “generalized” map for print. The map units described in the accompanying pamphlet reflect those of the detailed digital map. At the end of each unit description, the generalized map unit for that unit is listed. Compilation of this map began in September 1996, using available 1:250,000-scale data to compile and release a regional map of central Alaska (Wilson and others, 1998). An ongoing iterative process was used to describe and correlate individual geologic units to produce the units for this statewide map and its interim products—a series of regional geologic map compilations—which were released as the process continued (in the references cited in the pamphlet that are shown with an *). As additional geologic data were acquired, previously released data, correlations, and interpretations were updated as needed. Compilation of this map was complex, because the original source maps were made by different generations of geologists, mapping with very different ideas. Several of the older maps were completed before the concepts of accreted (suspect) terranes or even plate tectonics existed. On the other hand, some of the more recent maps were so governed by terrane analysis that conventional stratigraphic nomenclature was not used or is obscured. We adopted a traditional stratigraphic approach and avoided use of the sometimes controversial and commonly inconsistently defined or applied terrane terminology. Our decision to adopt a traditional approach is evident in a map that emphasizes the age and lithology of map units, rather than differences among fault-bounded packages of rocks. We did our best to resolve conflicting interpretations and map data from the regional compilations and from the individual source maps in areas where regional compilations had not been produced. We made every effort to preserve the original geologic map information, incorporating, where available, new data, but we were careful to not overinterpret the geologic data. Yet even our willingness to make interpretations and revisions did not enable us in some areas to resolve mapping conflicts or to reconcile different mapping styles. Therefore, there are several areas on the map where map units are separated by “quadrangle boundary faults.” More data and fieldwork may allow resolution of these conflicts. This Alaska compilation is unique in that it is integrated with a rich database of information provided in the spatial datasets and standalone attribute databases. Within the spatial files every line and polygon is attributed to its original source; the references to these sources are contained in related tables, as well as in stand-alone tables. Additional attributes include typical lithology, geologic setting, and age range for the map units. Also included are tables of radiometric ages.

Alaska↗