Search USGS⌕ Search

SEARCH · Search USGS

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources
USGS2011

Improved mapping of National Atmospheric Deposition Program wet-deposition in complex terrain using PRISM-gridded data sets

High-elevation regions in the United States lack detailed atmospheric wet-deposition data. The National Atmospheric Deposition Program/National Trends Network (NADP/NTN) measures and reports precipitation amounts and chemical constituent concentration and deposition data for the United States on annual isopleth maps using inverse distance weighted (IDW) interpolation methods. This interpolation for unsampled areas does not account for topographic influences. Therefore, NADP/NTN isopleth maps lack detail and potentially underestimate wet deposition in high-elevation regions. The NADP/NTN wet-deposition maps may be improved using precipitation grids generated by other networks. The Parameter-elevation Regressions on Independent Slopes Model (PRISM) produces digital grids of precipitation estimates from many precipitation-monitoring networks and incorporates influences of topographical and geographical features. Because NADP/NTN ion concentrations do not vary with elevation as much as precipitation depths, PRISM is used with unadjusted NADP/NTN data in this paper to calculate ion wet deposition in complex terrain to yield more accurate and detailed isopleth deposition maps in complex terrain. PRISM precipitation estimates generally exceed NADP/NTN precipitation estimates for coastal and mountainous regions in the western United States. NADP/NTN precipitation estimates generally exceed PRISM precipitation estimates for leeward mountainous regions in Washington, Oregon, and Nevada, where abrupt changes in precipitation depths induced by topography are not depicted by IDW interpolation. PRISM-based deposition estimates for nitrate can exceed NADP/NTN estimates by more than 100% for mountainous regions in the western United States.

Environmental Monitoring and Assessment↗
USGS2000

Airborne laser mapping of Assateague National Seashore Beach

Results are presented from topographic surveys of the Assateague Island National Seashore using an airborne scanning laser altimeter and kinematic Global Positioning System (GPS) technology. The instrument used was the Airborne Topographic Mapper (ATM), developed by the NASA Arctic Ice Mapping (AIM) group from the Goddard Space Flight Center's Wallops Flight Facility. In November, 1995, and again in May, 1996, these topographic surveys were flown as a functionality check prior to conducting missions to measure the elevation of extensive sections of the Greenland Ice Sheet as part of NASA's Global Climate Change program. Differences between overlapping portions of both surveys are compared for quality control. An independent assessment of the accuracy of the ATM survey is provided by comparison to surface surveys which were conducted using standard techniques. The goal of these projects is to make these measurements to an accuracy of ± 10 cm. Differences between the fall 1995 and 1996 surveys provides an assessment of net changes in the beach morphology over an annual cycle.

Maryl↗
USGS1999

Spatial geologic data model for the Gunnison, Grand Mesa, Uncompahgre National Forests mineral resource assessment area, southwestern Colorado and digital data for the Leadville, Montrose, Durango, and Colorado parts of the Grand Junction, Moab, and Cortez 1° x 2° geologic maps

The digital geologic and geographic information system (GIS) data presented here were prepared to aid in Grand Mesa, Uncompahgre, Gunnison National Forest (GMUG) mineral resource assessment Project studies by the U.S. Geological Survey Mineral Resource Program. The goals of the GMUG Project is to provide mineral resource data and an assessment for undiscovered mineral resources in U.S. Forest Service (USFS) and Bureau of Land Management (BLM) lands in southwestern Colorado. The Project area covers a large region in southwestern Colorado that is bounded by latitudes 37o 45’ to 39o 30’ north and longitudes 106o to 109o west. The study area is covered by all or parts of six 1o x2o topographic and quadrangle geologic maps, which include geologic maps for the Leadville (Tweto and others, 1978), Montrose (Tweto and others, 1976), Durango (Steven and others, 1974), Grand Junction (Cashion, 1973), Moab (Williams, 1976), and Cortez (Haynes and others, 1972) quadrangles. These geologic maps were used inasmuch as a complete remapping and compilation effort for this study area was beyond the scope of the Project.

Colorado↗
USGS2020

Mapping forested wetland inundation in the Delmarva Peninsula, USA: Use of deep learning model

The Delmarva Peninsula in the eastern United States is dominated by thousands of small, forested depressional wetlands that are highly sensitive to climate change and climate variability but provide critical ecosystem services. Due to the relatively small size of these depressional wetlands and occurrence under forest canopy cover, it is very challenging to map their inundation status based on existing remote sensing data and traditional classification approaches. In this study, we applied a state-of-the-art deep semantic segmentation network to map forested wetland inundation in the Delmarva region by integrating leaf-off Worldview-3 (WV3) multispectral data with fine resolution light detection and ranging (lidar) intensity and topographic data, including digital elevation model (DEM) and topographic wetness index (TWI). Wetland inundation maps generated from lidar intensity were used for model calibration and validation. The wetland inundation map results were also validated by field polygons and compared to the U.S. Fish and Wildlife Service National Wetlands Inventory (NWI) geospatial dataset and a random forest output from a previous study. Our results demonstrate that our deep learning model can accurately determine inundation status with an overall accuracy of 95% against field data and high overlap with lidar mapped inundation. The integration of topographic metrics in deep learning model can improve classification accuracy in depressional wetlands. This study highlights the great potential of deep learning models to map wetland inundation through use of high resolution optical and lidar remote sensing datasets.

Maryland↗
USGS1982

Landslide overview map of the conterminous United States

The accompanying landslide overview map of the conterminous United States is one of a series of National Environmental Overview Maps that summarize geologic, hydrogeologic, and topographic data essential to the assessment of national environmental problems. The map delineates areas where large numbers of landslides exist and areas which are susceptible to landsliding. It was prepared by evaluating the geologic map of the United States and classifying the geologic units according to high, medium, or low landslide incidence (number) and high, medium, or low susceptibility to landsliding. Rock types, structures, topography, precipitation, landslide type, and landslide incidence are mentioned for each physical subdivision of the United States. The differences in slope stability between the Colorado Plateau, the Appalachian Highlands, the Coast Ranges of California, and the Southern Rocky Mountains are compared in detail, to illustrate the influence of various natural factors on the types of landsliding that occur in regions having different physical conditions. These four mountainous regions are among the most landslide-prone areas in the United States. The Colorado Plateau is a deformed platform where interbedded sedimentary rocks of varied lithologic properties have been gently warped and deeply eroded. The rocks are extensively fractured. Regional fracture systems, joints associated with individual geologic structures, and joints parallel to topographic surfaces, such as cliff faces, greatly influence slope stability. Detached blocks at the edges of mesas, as well as columns, arched recesses, and many natural arches on the Colorado Plateau, were formed wholly or in part by mass movement. In the Appalachian Highlands, earth flows, debris flows, and debris avalanches predominate in weathered bedrock and colluvium. Damaging debris avalanches result when persistent steady rainfall is followed by a sudden heavy downpour. Landsliding in unweathered bedrock is controlled locally by joint systems similar to those on the Colorado Plateau. In some places, outward gravitational movement of valley walls due to stress release has formed anticlines and caused thrusting in the center of valleys. In the Coast Ranges of California, slopes are steep, and rocks are varied and extensively deformed. One of the most slide-prone terrains of the Coast Ranges is the tectonic melange of the Franciscan assemblage, on which huge masses of debris are moving slowly downslope. In southern California, debris flows generated by soil slips are particularly damaging. Similar flows are common in poorly consolidated Tertiary rocks of the central part of the State. Like the debris avalanches of the Appalachian Highlands, the flows form during intense rainfall after previous steady rain. The Southern Rocky Mountains are complex in rock type and climate, so that the landslides there are also complex. Slides range from rock-falls at one extreme to slumps and debris flows at the other. They include ?sackungen,? which are distinguished by ridgetop grabens associated with uphill-facing scarps on ridge sides, both features of gravitational origin. Extensive regional joint patterns have not been recognized, and shallow soil slips are only a minor hazard.

conterminous United States↗
USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗
USGS2014

Analysis of floods, including the tropical storm Irene inundation, of the Ottauquechee River in Woodstock, Bridgewater, and Killington and of Reservoir Brook in Bridgewater and Plymouth, Vermont

Digital flood-inundation maps were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers, New York District for a 25-mile reach of the Ottauquechee River and a 2-mile reach of Reservoir Brook in Vermont. The reach of the Ottauquechee River that was studied extends from River Road Bridge in Killington, Vt., to the Taftsville Dam in the village of Taftsville, in the town of Woodstock, Vt., and the reach of Reservoir Brook extends from a location downstream from the Woodward Reservoir in Plymouth, Vt., to its confluence with the Ottauquechee River in Bridgewater, Vt. The inundation maps depict estimates of the areal extent of flooding corresponding to the 1-percent annual exceedance probability (AEP) flood (also referred to as the 100-year flood) and the peak of the tropical storm Irene flood of August 28, 2011, which was greater than the 0.2-percent AEP flood (also referred to as the 500-year flood), as referenced to the USGS Ottauquechee River near West Bridgewater, Vt. streamgage (station 01150900). In addition to the two digital flood inundation maps, flood profiles were created that depict the study reach flood elevation of tropical storm Irene of August 2011 and the 10-, 2-, 1-, and 0.2-percent AEP floods, also known as the 10-, 50-, 100-, and 500-year floods, respectively. The 10-, 2-, 1-, and 0.2-percent AEP flood discharges were determined using annual peak flow data from the USGS Ottauquechee River near West Bridgewater, Vt. streamgage (station 01150900). Flood profiles were computed for the Ottauquechee River and Reservoir Brook by means of a one-dimensional step-backwater model. The model was calibrated using documented high-water marks of the peak of the tropical storm Irene flood of August 2011 as well as stage discharge data as determined for USGS Ottauquechee River near West Bridgewater, Vt. streamgage (station 01150900). The simulated water-surface profiles were combined with a digital elevation model within a geographic information system to delineate the areas flooded during tropical storm Irene and for the 1-percent AEP water-surface profile. The digital elevation model data were derived from light detection and ranging (lidar) data obtained for a 3,281-foot (1,000-meter) corridor along the Ottauquechee River study reach and were augmented with 33-foot (10- meter) contour interval data in the modeled flood-inundation areas outside the lidar corridor. The 33-foot (10-meter) contour interval USGS 15-minute quadrangle topographic digital raster graphics map used to augment lidar data was produced at a scale of 1:24,000. The digital flood inundation maps and flood profiles along with information regarding current stage from USGS streamgages on the Internet provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, as well as for post-flood recovery efforts.

Vermont↗
USGS1995

Mapping the response of riparian vegetation to possible flow reductions in the Snake River, Idaho

This study was initiated to determine the general effects of potential flow reductions in the middle Snake River (Swan Falls Dam downstream to the Idaho-Oregon border) on its riparian vegetation. Considerable water from the river is currently used to irrigate the adjacent Snake River Plain, and increased demand for water in the future is likely. The problem was subdivided into several research components including: field investigation of the existing riparian vegetation and river environment, hydrological modeling to calculate the effects of one flow scenario on hydrological regime, and integration of vegetation and hydrological modeling results with a Geographic Information System (GIs) to map the riverbed, island, and bank conditions under the scenario flow. Field work was conducted in summer 1990. Riparian vegetation along 40 U.S. Geological Survey cross-sections was sampled at approximately 1.25 mile intervals within the 50 mile long study area. Cross-section and flow data were provided by the U.S. Geological. Survey. GIs mapping of land/water cover using ARC/INFO was based on 1987 aerial photographs. Riverbed contour maps were produced by linking cross-section data, topographic contouring software ( anudem ), and GIs. The maps were used to spatially display shallow areas in the channel likely to become vegetated under reduced flow conditions. The scenario would reduce flow by approximately 20% (160 MAF) and lower the river an average of 0.5 ft. The scenario flow could cause a drop in the elevation of the riparian zone comparable to the drop in mean river level and expansion of the lower riparian zone into shallow areas of the channel. The GIs maps showed that the shallow areas of the channel more likely to become vegetated under the scenario flow are located in wide reaches near islands. Some possible ecological consequences of the scenario flow include a greater area of riparian habitat, reduced flow velocity and sedimentation in shallow channels leading to channel deactivation, increased island visitation and nest predation by predatory mammals due to loss of a water barrier between some islands and banks, and larger populations of alien plant species in the new riparian vegetation.

Idaho, Oregon↗
USGS1996

Great Basin geoscience data base

This CD-ROM serves as the archive for 73 digital GIS data set for the Great Basin. The data sets cover Nevada, eastern California, southeastern Oregon, southern Idaho, and western Utah. Some of the data sets are incomplete for the total area. On the CD-ROM, the data are provided in three formats, a prototype Federal Data Exchange standard format, the ESRI PC ARCVIEW1 format for viewing the data, and the ESRI ARC/INFO export format. Extensive documentation is provided to describe the data, the sources, and data enhancements. The following data are provided. One group of coverages comes primarily from 1:2,000,000-scale National Atlas data and can be assembled for use as base maps. These various forms of topographic information. In addition, public land system data sets are provided from the 1:2,500,000-scale Geologic Map of the United States and 1:500,000-scale geologic maps of Nevada, Oregon, and Utah. Geochemical data from the National Uranium Resource Evaluation (NURE) program are provided for most of the Great Basin. Geophysical data are provided for most of the Great Basin, typically gridded data with a spacing of 1 km. The geophysical data sets include aeromagnetics, gravity, radiometric data, and several derivative products. The thematic data sets include geochronology, calderas, pluvial lakes, tectonic extension domains, distribution of pre-Cenozoic terranes, limonite anomalies, Landsat linear features, mineral sites, and Bureau of Land Management exploration and mining permits.

Data Series↗
USGS1996

Controls on surface water chemistry in the upper Merced River basin, Yosemite National Park, California

Surface water draining granitic bedrock in Yosemite National Park exhibits considerable variability in chemical composition, despite the relative homogeneity of bedrock chemistry. Other geological factors, including the jointing and distribution of glacial till, appear to exert strong controls on water composition. Chemical data from three surface water surveys in the upper Merced River basin conducted in August 1981, June 1988 and August 1991 were analysed and compared with mapped geological, hydrological and topographic features to identify the solute sources and processes that control water chemistry within the basin during baseflow. Water at most of the sampling sites was dilute, with alkalinities ranging from 26 to 77 μequiv. l −1 . Alkalinity was much higher in two subcatchments, however, ranging from 51 to 302 μequiv. l −1 . Base cations and silica were also significantly higher in these two catchments than in the rest of the watershed. Concentrations of weathering products in surface water were correlated to the fraction of each subcatchment underlain by surficial material, which is mostly glacial till. Silicate mineral weathering is the dominant control on concentrations of alkalinity, silica and base cations, and ratios of these constituents in surface water reflect the composition of local bedrock. Chloride concentrations in surface water samples varied widely, ranging from <1 to 96 μequiv. l −1 . The annual volume-weighted mean chloride concentration in the Merced River at the Happy Isles gauge from 1968 to 1990 was 26 μequiv. l −1 , which was five times higher than in atmospheric deposition (4–5 μequiv. l −1 ), suggesting that a source of chloride exists within the watershed. Saline groundwater springs, whose locations are probably controlled by vertical jointing in the bedrock, are the most likely source of the chloride. Sulphate concentrations varied much less than most other solutes, ranging from 3 to 14 μequiv. l −1 . Concentrations of sulphate in quarterly samples collected at the watershed outlet also showed relatively little variation, suggesting that sulphate may be regulated to some extent by a within-watershed process, such as sulphate adsorption.

Hydrological Processes↗
USGS2024

Phenology forecasting models for detection and management of invasive annual grasses

Non-native annual grasses can dramatically alter fire frequency and reduce forage quality and biodiversity in the ecosystems they invade. Effective management techniques are needed to reduce these undesirable invasive species and maintain ecosystem services. Well-timed management strategies, such as grazing, that are applied when invasive grasses are active prior to native plants can control invasive species spread and reduce their impact; however, anticipating the timing of key phenological stages that are susceptible to management over vast landscapes is difficult, as the phenology of these species can vary greatly over time and space. To address this challenge, we created range-wide phenology forecasts for two problematic invasive annual grasses: cheatgrass ( Bromus tectorum ), and red brome ( Bromus rubens ). We tested a suite of 18 mechanistic phenology models using observations from monitoring experiments, volunteer science, herbarium records, timelapse camera imagery, and downscaled gridded climate data to identify the models that best predicted the dates of flowering and senescence of the two invasive grass species. We found that the timing of flowering and senescence of cheatgrass and red brome were best predicted by photothermal time models that had been adjusted for topography using gridded continuous heat-insolation load index values. Phenology forecasts based on these models can help managers make decisions about when to schedule management actions such as grazing to reduce undesirable invasive grasses and promote forage production, quality, and biodiversity in grasslands; to predict the timing of greatest fire risk after annual grasses dry out; and to select remote sensing imagery to accurately map invasive grasses across topographic and latitudinal gradients. These phenology models also have the potential to be operationalized for within-season or within-year decision support.

Ecosphere↗
USGS2025

Assessing flood water infiltration and storage in a restored floodplain

In urban areas, floodplain restoration is gaining prominence as a strategy for restoring the natural functions of floodplain ecosystems and reducing flood risk. This has spurred research into potential interactions between floodwaters, the hyporheic zone, and the floodplain aquifer. An urban restored stream in Wisconsin, USA, was used as a case study to examine four methods to estimate floodplain infiltration and storage during overbank floods. We characterised flood-related infiltration over a 4-year period from 2018 through 2021 by simultaneously and continuously measuring groundwater levels and vertical temperature profiles with stream water levels linked to high-resolution flood inundation maps. High-resolution topographic data helped to quantify surface floodplain storage and the unsaturated soil volume relative to flood stage. Infiltration estimates from the simple methods align well with those from the more complex methods; however, the complex methods provide additional insights about the factors influencing infiltration. Results from all methods indicate that the volume of water that vertically infiltrates during floods is likely small relative to the total volume of the flood, with 0.08%–0.52% of flood water infiltrating into the floodplain, on average. Spatially variable vertical hydraulic gradients, driven by flood depth, groundwater level, and permeability, imply heterogeneous patterns of infiltration across the floodplain. Gradients favourable for infiltration typically occurred during the onset of flooding but, over the study period, were mostly (98% of the time) favourable for groundwater discharge to the channel (non-flood periods). These findings highlight the importance of considering surface-groundwater dynamics, floodplain soils, and unsaturated floodplain volume in defining the benefits of floodplain infiltration for flood attenuation.

Wisconsin↗
USGS1993

Geomorphic observations of rivers in the Oregon Coast Range from a regional reconnaissance perspective

Changes in long profile, gradient, gradient index, pseudo-hypsometric integral, valley incision, and sinuosity fractal dimension for rivers in western Oregon were studied to determine their usefulness in assessing an hypothesis of differential uplift within the Coast Range. All data were gathered from topographic quadrangles and geologic maps, and so the results of this paper are limited to the description of river forms with only limited interpretations. Rivers were naturally divided into three groups, those in the western Coast Range, the eastern Coast Range, and the Klamath and Cascade Ranges, and differences in river morphometry were generalized. Rivers in the western Coast Range had more divergent characteristics, whereas those in the other groups were more similar within each group. For example, long profiles of western Coast Range rivers had diverse forms, but in the other groups, long profiles were similar within the group. Pseudo-hypsometric integrals had a wide scatter in the western Coast Range, but in the other ranges, the pseudo-hypsometric integral was more narrowly defined. Valley entrenchment and high sinuosity were common in the western Coast Range, and were less visible in the eastern Coast Range. These regional generalizations do not hold for the central Coast Range near 44.5°N where the Yaquina and Marys Rivers are located. In the eastern Coast Range, the Marys River is unique in that it has a convex bulge in its long profile, does not have an increasing valley-floor width to valley height ratio downstream, and has a high sinuosity fractal dimension. In the western Coast Range, the Yaquina River is unique in that it has a smoothly decreasing long profile, has a very low pseudo-hypsometric integral, and does not have a decreasing valley-floor width to valley height ratio downstream. There may be many explanations for these observations, but these observations are also consistent with tectonic interpretations that the central western Coast Range is the locus of synclinal tilting and that the entire Oregon coast is experiencing landward tilting and uplift.

Geomorphology↗
USGS2012

Geologic implications of topographic, gravity, and aeromagnetic data in the northern Yukon-Koyukuk province and its borderlands, Alaska

The northern Yukon-Koyukuk province is characterized by low elevation and high Bouguer gravity and aeromagnetic anomalies in contrast to the adjacent Brooks Range and Ruby geanticline. Using newly compiled digital topographic, gravity, and aeromagnetic maps, I have divided the province into three geophysical domains. The Koyukuk domain, which is nearly equivalent to the Koyukuk lithotectonic terrane, is a horseshoe-shaped area, open to the south, of low topography, high gravity, and high-amplitude magnetic anomalies caused by an intraoceanic magmatic arc. The Angayucham and Kanuti domains are geophysical subdivisions of the Angayucham lithotectonic terrane that occur along the northern and southeastern margins of the Yukon-Koyukuk province, where oceanic rocks have been thrust over continental rocks of the Brooks Range and Ruby geanticline. Basalt of the Angayucham domain causes strong gravity highs and weak magnetic highs. The Kanuti domain is distinguished from the Angayucham domain by intense magnetic highs caused by cumulus mafic and ultramafic plutonic rocks, abundant ultramafic mantle tectonites, and magnetic syenite and monzonite. Long-wavelength, low-intensity magnetic highs and undulating gravity anomalies indicate an undulating basement surface of varied lithology beneath the Kobuk-Koyukuk and Lower Yukon basins. Modeling of gravity and magnetic anomalies shows that oceanic rocks of the Angayucham and Kanuti domains dip inward beneath the Kobuk-Koyukuk basin. The modeling supports, but does not prove, the hypothesis that the crust of the Kobuk-Koyukuk basin is 32–35 km thick, consisting of a tectonically thickened section of Cretaceous volcanic and sedimentary rocks and older oceanic crust. Plutons of the Brooks Range and the southern Ruby geanticline are nonmagnetic, ilmenite series, S-type granites that cause magnetic lows. Plutons of the northern Ruby geanticline are variable in their magnetic properties and cause both highs and lows. Plutons of both the eastern and western Yukon-Koyukuk province are variable in their magnetic expression but commonly cause magnetic lows in contrast to andesite.

Journal of Geophysical Research Solid Earth↗
USGS2013

Accuracy assessment of a mobile terrestrial lidar survey at Padre Island National Seashore

The higher point density and mobility of terrestrial laser scanning (light detection and ranging (lidar)) is desired when extremely detailed elevation data are needed for mapping vertically orientated complex features such as levees, dunes, and cliffs, or when highly accurate data are needed for monitoring geomorphic changes. Mobile terrestrial lidar scanners have the capability for rapid data collection on a larger spatial scale compared with tripod-based terrestrial lidar, but few studies have examined the accuracy of this relatively new mapping technology. For this reason, we conducted a field test at Padre Island National Seashore of a mobile lidar scanner mounted on a sport utility vehicle and integrated with a position and orientation system. The purpose of the study was to assess the vertical and horizontal accuracy of data collected by the mobile terrestrial lidar system, which is georeferenced to the Universal Transverse Mercator coordinate system and the North American Vertical Datum of 1988. To accomplish the study objectives, independent elevation data were collected by conducting a high-accuracy global positioning system survey to establish the coordinates and elevations of 12 targets spaced throughout the 12 km transect. These independent ground control data were compared to the lidar scanner-derived elevations to quantify the accuracy of the mobile lidar system. The performance of the mobile lidar system was also tested at various vehicle speeds and scan density settings (e.g. field of view and linear point spacing) to estimate the optimal parameters for desired point density. After adjustment of the lever arm parameters, the final point cloud accuracy was 0.060 m (east), 0.095 m (north), and 0.053 m (height). The very high density of the resulting point cloud was sufficient to map fine-scale topographic features, such as the complex shape of the sand dunes.

Texas↗
USGS1989

Geologic analyses of Shuttle Imaging Radar (SIR-B) data of Kilauea Volcano, Hawaii

Analyses of imaging radar data of volcanic terranes on Earth and Venus have emphasized the need for a clearer understanding of how these data can be most effectively used to accomplish important volcanological goals, including the interpretation of eruptive styles and the characterization of the geologic history of volcanic centers. The second Shuttle Imaging Radar experiment (SIR-B) obtained two digital images over the summit caldera and the Southwest Rift Zone of Kilauea Volcano in 1984. Our geologic analyses of these images indicate that SIR-B data are particularly useful for delineating the distribution and surface textural variations of a'a lava flows, for mapping large-scale topographic features with radar-facing slopes, and for identifying an areally extensive pyroclastic deposit. Analyses of the SIR-B data of Kilauea, however, do not permit unambiguous identification of landforms such as pahoehoe lava flows, cinder cones, and fissures. Although separation of low-return units such as pahoehoe lava flows and adjacent pyroclastic ash is not greatly improved using standard image-enhancement techniques, the texture-analysis technique applied here did facilitate discrimination of such smooth-surfaced volcanic deposits. Although analyses of the SIR-B data permit a generally accurate interpretation of the eruptive history of Kilauea, the inability to distinguish low-return pahoehoe flows results in misinterpretation of several aspects of Kilauea volcanism, suggesting that caution should be exercised in the interpretation of SAR data of volcanic terranes.

Hawaii↗
USGS2023

Construction and modification of debris-flow alluvial fans as captured in the geomorphic and sedimentary record: Examples from the western Sangre de Cristo Mountains, south-central Colorado

Debris-flow alluvial fans are iconic features of dynamic landscapes and are hypothesized to record tectonic and climatic change. Here, we highlight their complex formation and evolution through an exemplary suite of Quaternary debris-flow alluvial fans emanating from the western range front of the Sangre de Cristo Mountains in south-central Colorado, USA. To evaluate the constructive and modifying processes that produce fan form and the associated sedimentary signatures, we applied a combined geomorphologic and sedimentologic approach using sedimentary facies analysis, soils mapping, high-resolution topographic data, and luminescence geochronology to document timing of fan construction and modification. We explored two subsets of fans in the study area: a southern set sourced from the extensively glaciated drainages of the Blanca Peak massif, and a northern set from the unglaciated drainages south of Great Sand Dunes National Park. Both sets of fans have: (1) active and successively abandoned surfaces that show evolving degradation of primary features through modification by secondary processes, (2) associated facies that display distinct characteristics representative of primary depositional and secondary modifying sedimentary processes, and (3) evidence of primary debris flow with subsequent modification by secondary processes. We found that surface geomorphology and facies assemblages in exposed alluvial-fan deposits represent sediment transport processes on both active and abandoned lobes. The link between fan surface morphologies and the sedimentary facies of their deposits provides a basis for an evolutionary process–based interpretation of debris-flow alluvial-fan geomorphology and provides a better understanding of complexities in buried paleosurfaces (intraformational progressive unconformities), surficial deformation, and landform development as recorded in debris-flow fan deposits in the sedimentary record.

Colorado↗
USGS2019

Effects of Cenozoic subduction along the outboard margin of the Northern Cordillera: Derived from e-book on the Northern Cordillera (Alaska and Western Canada) and adjacent marine areas

This article describes the regional effects of Cenozoic subduction along the outboard margin of the Northern Cordillera (Alaska, USA, and Western Canada), and thereby acquaints the reader with several chapters of the e-book Dynamic Geology of the Northern Cordillera (Alaska, Western Canada, and Adjacent Marine Areas) . This article and the e-book are written for earth-science students and teachers. The level of writing for the article and the source e-book is that of popular science magazines, and readers are encouraged to share this article with students and laypersons. The main thrust of the article is to present and describe a suite of ten regional topographic, bathymetric, and geologic maps, and two figures portraying deep-crustal sections that illustrate the regional effects of Cenozoic subduction along the outboard margin of the North American Cordillera. The regional maps and cross sections are described in a way that a teacher might describe a map to students. Cenozoic subduction along the margin of the Northern Cordillera resulted in the formation of the following: (1) underthrusting of terranes and oceanic lithosphere beneath Southern Alaska; (2) landscapes, including narrow continental shelves along Southern and Southeastern Alaska and Western Canada (the Canadian Cordillera) and continental-margin mountain ranges, including the Alaska Peninsula, Chugach Range, Saint Elias Mountains, and Cascade Mountains; (3) sedimentary basins; (4) an array of active continental strike-slip and thrust faults (inboard of subduction zones); (5) earthquake belts related to subduction of terranes and oceanic plates; (6) active volcanoes, including continental-margin arcs (the Aleutian, Wrangell, and Cascade Arcs) linked to subduction zones, and interior volcanic belts related to strike-slip faulting or to hot spots; (7) lode and placer mineral deposits related to continental margin arcs or subduction of oceanic ridges; (8) hot springs related to continental-margin arcs; (9) plate movements as recorded from GPS measurements; and (10) underthrusting of terranes and oceanic lithosphere beneath the Northern Cordillera.

Alaska, British Columbia, Idaho, Montana, Washingt↗