Search USGS⌕ Search

SEARCH · Search USGS

Results for “Interfaces”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources

Natural gas geochemistry of sediments drilled on the 2005 Gulf of Mexico JIP cruise

In April and May 2005, cores were acquired and sub-sampled for gases in lease blocks Atwater Valley 13 and 14 and Keathley Canyon 151 during deep subseafloor drilling conducted as part of the JIP study of gas hydrates in the northern Gulf of Mexico. Sample types included sediment headspace gas, free gas derived from sediment gas exsolution, and gas exsolution from controlled degassing of pressurized cores. The gases measured both onboard and in shore-based labs were nitrogen, oxygen, hydrogen sulfide, carbon dioxide, and the hydrocarbons methane through hexane. The presence of seafloor mounds, seismic anomalies, a shallow sulfate-methane interface, and similar gas compositions and isotopic compositions near the seafloor and at depth suggest an upward flux of methane at both sites. Sediment gases at the Atwater Valley sites, where seafloor mounds and adjacent sediments were cored, strongly suggest a microbial source of methane, with very little thermogenic gas input. Sediment gas from all cores contained from about 96 to 99.9% methane, with the balance composed primarily of carbon dioxide. Methane to ethane ratios were greater than 1000, and often over 10,000. Gases from cores at Keathley Canyon were similar to those at Atwater Valley, however, deeper cores from Keathley Canyon contained more ethane, propane, and butane suggesting mixing with minor concentrations thermogenic gas. The isotopic composition of methane, ethane, and carbon dioxide were measured, and ??13C values range from -84.3 to -71.5???, -65.2 to -46.8???, and -23.5 to -3.0???, respectively, all consistent with microbial gas sources, early diagenesis of organic matter and perhaps biodegradation of petroleum. The presence of deep microbial gas at these sites here and elsewhere highlights a potentially significant, predominantly microbial gas source in the northern Gulf of Mexico.

Marine and Petroleum Geology↗

Potential freshening impacts on fines migration and pore-throat clogging during gas hydrate production: 2-D micromodel study with Diatomaceous UBGH2 sediments

The methane gas hydrate stored in natural sediments is considered a potential gas resource. Countries such as China, India, Japan, and Korea are interested in commercializing this resource, and offshore field pilot tests for gas production have been conducted using depressurization methods to destabilize gas hydrate and facilitate the migration of methane to the production well. However, fine-grained sediments (fines), which are present even in coarse-grained, gas hydrate-bearing sediments, can be resuspended in the production fluid, subsequently clogging pore throats in the formation and reducing the overall production efficiency. We conducted laboratory tests to evaluate the suspension and clogging potential of fines collected from the Ulleung Basin, East Sea, Korea during the 2010 Ulleung Basin Gas Hydrate Expedition 2 (UBGH2). Experimental results reveal that diatoms are prevalent in the sediment and largely control the suspension and clogging behavior. Fluid flow experiments in 2D micromodels show clogging occurs even when injecting the minimum sediment concentration (0.1wt% in the fluid) through micromodels with pore-throat widths at the high end of the anticipated range for UBGH2 gas hydrate-bearing sands (100µm). Mobile gas/fluid interfaces forming during gas hydrate dissociation accentuate clogging by concentrating and mobilizing fines. Sedimentation tests show pore-water freshening during dissociation is not anticipated to change the potential for diatoms to become entrained in the pore water flow, even for the observed gas hydrate saturations of ~80%. Muscovite and illite are also significant components of the tested sediment, however, and pore-water freshening increases their potential for resuspension and clogging. Overall, the resuspension and clogging potential of these fine sediments should increase as gas hydrate dissociation progresses in the thin, gas hydrate-bearing sands investigated in the Ulleung Basin.

Marine and Petroleum Geology↗

Avian influenza spillover into poultry: Environmental influences and biosecurity protections

With the continued spread of highly pathogenic avian influenza (HPAI), understanding the complex dynamics of virus transfer at the wild – agriculture interface is paramount. Spillover events (i.e., virus transfer from wild birds into poultry) are related to proximity to infected wild bird populations and environmental conditions. By accounting for such dynamics, we can take a combined approach to assess the impacts of biosecurity measures implemented at poultry farms while simultaneously accounting for their local risk levels. We implemented a Bayesian joint-likelihood logistic regression for the Continental U.S. comparing models of spatiotemporal risk according to land use, weather, and predicted waterfowl distributions followed by integrating a farm-level case-control questionnaire dataset focused on identifying trends in HPAI spillover risk associated with a farm's biosecurity practices. We found that estimates of waterfowl abundance, along with mean precipitation and temperature during winter, were most correlated with spatiotemporal HPAI risk. Additionally, we identified multiple biosecurity practices associated with reduced risk to HPAI, where the strongest relationships were related to litter decontamination treatments, vehicle wash stations, and avoiding shared dead-bird disposal sites with other farms. This model broadly guides surveillance of HPAI in wild and domestic populations, identifying when and where we are most likely to see increased instances of the virus while also providing insights into how poultry farms can better protect themselves from risk.

contiguous United States↗

Earthquake lights and the stress-activation of positive hole charge carriers in rocks

Earthquake-related luminous phenomena (also known as earthquake lights) may arise from (1) the stress-activation of positive hole (p-hole) charge carriers in igneous rocks and (2) the accumulation of high charge carrier concentrations at asperities in the crust where the stress rates increase very rapidly as an earthquake approaches. It is proposed that, when a critical charge carrier concentration is reached, the p-holes form a degenerated solid state plasma that can break out of the confined rock volume and propagate as a rapidly expanding charge cloud. Upon reaching the surface the charge cloud causes dielectric breakdown at the air-rock interface, i.e. corona discharges, accompanied by the emission of light and high frequency electromagnetic radiation. ?? 2006 Elsevier Ltd. All rights reserved.

Physics and Chemistry of the Earth↗

Geomechanical response of permafrost-associated hydrate deposits to depressurization-induced gas production

In this simulation study, we analyzed the geomechanical response during depressurization production from two known hydrate-bearing permafrost deposits: the Mallik (Northwest Territories, Canada) deposit and Mount Elbert (Alaska, USA) deposit. Gas was produced from these deposits at constant pressure using horizontal wells placed at the top of a hydrate layer (HL), located at a depth of about 900??m at the Mallik site and 600??m at the Mount Elbert site. The simulation results show that general thermodynamic and geomechanical responses are similar for the two sites, but with substantially higher production and more intensive geomechanical responses at the deeper Mallik deposit. The depressurization-induced dissociation begins at the well bore and then spreads laterally, mainly along the top of the HL. The depressurization results in an increased shear stress within the body of the receding hydrate and causes a vertical compaction of the reservoir. However, its effects are partially mitigated by the relatively stiff permafrost overburden, and compaction of the HL is limited to less than 0.4%. The increased shear stress may lead to shear failure in the hydrate-free zone bounded by the HL overburden and the downward-receding upper dissociation interface. This zone undergoes complete hydrate dissociation, and the cohesive strength of the sediment is low. We determined that the likelihood of shear failure depends on the initial stress state as well as on the geomechanical properties of the reservoir. The Poisson's ratio of the hydrate-bearing formation is a particularly important parameter that determines whether the evolution of the reservoir stresses will increase or decrease the likelihood of shear failure.

Journal of Petroleum Science and Engineering↗

A working environment for digital planetary data processing and mapping using ISIS and GRASS GIS

Since the beginning of planetary exploration, mapping has been fundamental to summarize observations returned by scientific missions. Sensor-based mapping has been used to highlight specific features from the planetary surfaces by means of processing. Interpretative mapping makes use of instrumental observations to produce thematic maps that summarize observations of actual data into a specific theme. Geologic maps, for example, are thematic interpretative maps that focus on the representation of materials and processes and their relative timing. The advancements in technology of the last 30 years have allowed us to develop specialized systems where the mapping process can be made entirely in the digital domain. The spread of networked computers on a global scale allowed the rapid propagation of software and digital data such that every researcher can now access digital mapping facilities on his desktop. The efforts to maintain planetary missions data accessible to the scientific community have led to the creation of standardized digital archives that facilitate the access to different datasets by software capable of processing these data from the raw level to the map projected one. Geographic Information Systems (GIS) have been developed to optimize the storage, the analysis, and the retrieval of spatially referenced Earth based environmental geodata; since the last decade these computer programs have become popular among the planetary science community, and recent mission data start to be distributed in formats compatible with these systems. Among all the systems developed for the analysis of planetary and spatially referenced data, we have created a working environment combining two software suites that have similar characteristics in their modular design, their development history, their policy of distribution and their support system. The first, the Integrated Software for Imagers and Spectrometers (ISIS) developed by the United States Geological Survey, represents the state of the art for processing planetary remote sensing data, from the raw unprocessed state to the map projected product. The second, the Geographic Resources Analysis Support System (GRASS) is a Geographic Information System developed by an international team of developers, and one of the core projects promoted by the Open Source Geospatial Foundation (OSGeo). We have worked on enabling the combined use of these software systems throughout the set-up of a common user interface, the unification of the cartographic reference system nomenclature and the minimization of data conversion. Both software packages are distributed with free open source licenses, as well as the source code, scripts and configuration files hereafter presented. In this paper we describe our work done to merge these working environments into a common one, where the user benefits from functionalities of both systems without the need to switch or transfer data from one software suite to the other one. Thereafter we provide an example of its usage in the handling of planetary data and the crafting of a digital geologic map. ?? 2010 Elsevier Ltd. All rights reserved.

Conference Paper↗

Pysochron: A Python-based solution for calculating cosmogenic 26Al/10Be isochron burial ages

Cosmogenic 26 Al/ 10 Be isochron burial dating is a powerful tool for dating sediment burial over the past several million years. By measuring in-situ 26 Al and 10 Be in a suite of samples from the same depth in a buried deposit, it is possible to quantify the inventory of cosmogenic nuclides produced after burial, date the burial of shallow sediments, identify sediment reworking, and calculate paleo-erosion rates. While this approach has been used to date materials around the world for over a decade, few published codes exist for performing 26 Al/ 10 Be isochron calculations. The isochron calculation options that are available typically rely on numerous files and libraries, rendering modification and troubleshooting difficult. Moreover, the widespread use of proprietary programming languages – and their associated addon packages – can place an additional financial burden on an already costly endeavor. Pysochron ( https://code.usgs.gov/recon/pysochron ) provides a solution to these issues. In its base form, it exists as a single script that can be easily modified, upgraded, and shared. Because it was developed in an open-source environment, all required computational packages are available free of charge. A user-friendly interface allows rapid modification of calculation parameters, and an automated commentary on isochron results provides insights and recommendations. Pysochron has been validated with 40 published cosmogenic 26 Al/ 10 Be burial isochrons around the world, with burial ages ranging from ∼5 Ma to ∼180 ka. As such, it is a promising option for members of the cosmogenic nuclide community seeking a straightforward, cost-effective, and flexible solution to isochron burial dating challenges.

Quaternary Geochronology↗

Mass spectrometric U-series dating of the Chaoxian hominin site at Yinshan, eastern China

The fossils of Chaoxian hominin, widely accepted as representing archaic Homo sapiens in eastern China, were recovered from the middle or slightly higher levels of Layer 2 deposits of a collapsed cave at Yinshan, Anhui Province. Results of mass spectrometric U-series dating of intercalated speleothem calcites are presented. Based mainly on four broadly coeval calcite samples, the hominin fossils should be bracketed in the range of 310–360 ka or somewhat older. These ages are much older than the previous estimate at 160–200 ka based on the U-series dating of fossil teeth and bones, and may be cited as supporting evidence for an earlier H. erectus –archaic H. sapiens interface in China.

Yinshan↗

Use of imaging spectroscopy and LIDAR to characterize fuels for fire behavior prediction

To protect ecosystem services and the increasing wildland urban interface in a world with fire, comprehensive maps of wildland fuels are needed to predict fire behavior and effects. Traditionally, fuels have been categorized into a classification scheme whereby a single metric represents vegetation composition and structure, which can then be parameterized based on variable vegetation amount and condition. Remote sensing has been used to extrapolate between known field plots across the landscape, however until recently, those technologies have had limited ability to characterize fuels (e.g., composition, horizontal and vertical connectivity). Using new technologies (imaging spectroscopy and LIDAR), the objectives of this study are to assess: 1) how fuel characteristics observed from remote sensing affect categorical fuel classifications, and 2) how fuel characteristics affect landscape-scale fire behavior (spread rate, areal extent and perimeter). The analysis was conducted over the 2014 California King Fire that burned ~40,000 ha over lands with varying use and history and has unique remote sensing observations from before and after the fire. This analysis compares fuel classifications from a synergistic field, model, and Landsat approach (LANDFIRE) and products derived from the Airborne Visible/Infrared Imaging Spectrometer and LIDAR (MapFUELS). Each classification focuses on different fuel characteristics, which were then used to compare differences in a fire simulation model (CAWFE) and actual fire behavior. The results show that fuel characteristic inputs such as horizontal connectivity or fuel type and vertical structure affect fire spread rate and final fire extent (respectively). These results present the opportunity for future integration of fuel characteristics observed at coarser resolutions (900 m 2 ) into predictions of fire behavior a similar spatial resolutions (as opposed to the current standard based on empirical relationships between fuel and fire behavior at ~12 m 2 resolution).

Remote Sensing Applications: Society and Environme↗

Monitoring gradual ecosystem change using Landsat time series analyses: case studies in selected forest and rangeland ecosystems

The focus of the study was to assess gradual changes occurring throughout a range of natural ecosystems using decadal Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper Plus (ETM +) time series data. Time series data stacks were generated for four study areas: (1) a four scene area dominated by forest and rangeland ecosystems in the southwestern United States, (2) a sagebrush-dominated rangeland in Wyoming, (3) woodland adjacent to prairie in northwestern Nebraska, and (4) a forested area in the White Mountains of New Hampshire. Through analyses of time series data, we found evidence of gradual systematic change in many of the natural vegetation communities in all four areas. Many of the conifer forests in the southwestern US are showing declines related to insects and drought, but very few are showing evidence of improving conditions or increased greenness. Sagebrush communities are showing decreases in greenness related to fire, mining, and probably drought, but very few of these communities are showing evidence of increased greenness or improving conditions. In Nebraska, forest communities are showing local expansion and increased canopy densification in the prairie–woodland interface, and in the White Mountains high elevation understory conifers are showing range increases towards lower elevations. The trends detected are not obvious through casual inspection of the Landsat images. Analyses of time series data using many scenes and covering multiple years are required in order to develop better impressions and representations of the changing ecosystem patterns and trends that are occurring. The approach described in this paper demonstrates that Landsat time series data can be used operationally for assessing gradual ecosystem change across large areas. Local knowledge and available ancillary data are required in order to fully understand the nature of these trends.

Remote Sensing of Environment↗

Quality control and assessment of interpreter consistency of annual land cover reference data in an operational national monitoring program

The U.S. Geological Survey Land Change Monitoring, Assessment and Projection (USGS LCMAP) initiative is working toward a comprehensive capability to characterize land cover and land cover change using dense Landsat time series data. A suite of products including annual land cover maps and annual land cover change maps will be produced using the Landsat 4-8 data record. LCMAP products will initially be created for the conterminous United States (CONUS) and then extended to include Alaska and Hawaii. A critical component of LCMAP is the collection of reference data using the TimeSync tool, a web-based interface for manually interpreting and recording land cover from Landsat data supplemented with fine resolution imagery and other ancillary data. These reference data will be used for area estimation and validation of the LCMAP annual land cover products. Nearly 12,000 LCMAP reference sample pixels have been interpreted and a simple random subsample of these pixels has been interpreted independently by a second analyst (hereafter referred to as "duplicate interpretations"). The annual land cover reference class labels for the 1984-2016 monitoring period obtained from these duplicate interpretations are used to address the following questions: 1) How consistent are the reference class labels among interpreters overall and per class? 2) Does consistency vary by geographic region? 3) Does consistency vary as interpreters gain experience over time; and 4) Does interpreter consistency change with improving availability and quality of imagery from 1984 to 2016? Overall agreement between interpreters was 88%. Class-specific agreement ranged from 46% for Disturbed to 94% for Water, with more prevalent classes (Tree Cover, Grass/Shrub and Cropland) generally having greater agreement than rare classes (Developed, Barren and Wetland). Agreement between interpreters remained approximately the same over the 12-month period during which these interpretations were completed. Increasing availability of Landsat and Google Earth fine resolution data over the 1984 to 2016 monitoring period coincided with increased interpreter consistency for the post-2000 data record. The reference data interpretation and quality assurance protocols implemented for LCMAP demonstrate the technical and practical feasibility of using the Landsat archive and intensive human interpretation to produce national, annual reference land cover data over a 30 year period. Protocols to quantify and enhance interpreter consistency are critical elements to document and ensure quality of these reference data.

Remote Sensing of Environment↗

On-demand global Landsat evapotranspiration product: Development, evaluation, and dissemination

Global actual evapotranspiration (ET) is one of the essential climate variables needed to understand and manage the relationships among food, energy, and water resources. The U.S. Geological Survey Earth Resources Observation and Science (EROS) Center launched a provisional ET product in 2020, offering on-demand, field-scale global coverage derived from Landsat data through the EROS Science Processing Architecture (ESPA) platform. The ESPA interface provides ET data for cloud-free Landsat overpasses starting in 1982 with Landsat 4 through the current Landsat 9. The ET data are delivered as a Provisional Level-3 Science product created using the Operational Simplified Surface Energy Balance (SSEBop) model. Landsat surface temperature and reference ET are the main model drivers along with vegetation index and net radiation for model parameterization. A large volume of Landsat-based ET orders (e.g., over 1,200,000 images from June 2020 through December 2025) around the world indicate increasing awareness and application of the ET data. The ESPA platform enables land and water resource managers and researchers to access a first-order ET product without requiring advanced knowledge of remote sensing technology or evapotranspiration modeling. We present the methodology and workflow of the on-demand Landsat ET product and its performance evaluations over diverse hydro-climatic settings. The product can help estimate field-scale consumptive water use and thus quickly and consistently assess historical water use, allocation, and budget to inform water management under changing environments. Future ET data aggregated to monthly and seasonal time scales are expected to enhance integration with decision-making tools and procedures.

Remote Sensing of Environment↗

Improvement of the R-SWAT-FME framework to support multiple variables and multi-objective functions

Application of numerical models is a common practice in the environmental field for investigation and prediction of natural and anthropogenic processes. However, process knowledge, parameter identifiability, sensitivity, and uncertainty analyses are still a challenge for large and complex mathematical models such as the hydrological/water quality model, Soil and Water Assessment Tool (SWAT). In this study, the previously developed R program language-SWAT-Flexible Modeling Environment (R-SWAT-FME) was improved to support multiple model variables and objectives at multiple time steps (i.e., daily, monthly, and annually). This expansion is significant because there is usually more than one variable (e.g., water, nutrients, and pesticides) of interest for environmental models like SWAT. To further facilitate its easy use, we also simplified its application requirements without compromising its merits, such as the user-friendly interface. To evaluate the performance of the improved framework, we used a case study focusing on both streamflow and nitrate nitrogen in the Upper Iowa River Basin (above Marengo) in the United States. Results indicated that the R-SWAT-FME performs well and is comparable to the built-in auto-calibration tool in multi-objective model calibration. Overall, the enhanced R-SWAT-FME can be useful for the SWAT community, and the methods we used can also be valuable for wrapping potential R packages with other environmental models.

Science of the Total Environment↗

Differentiating transpiration from evaporation in seasonal agricultural wetlands and the link to advective fluxes in the root zone

The current state of science and engineering related to analyzing wetlands overlooks the importance of transpiration and risks data misinterpretation. In response, we developed hydrologic and mass budgets for agricultural wetlands using electrical conductivity (EC) as a natural conservative tracer. We developed simple differential equations that quantify evaporation and transpiration rates using flowrates and tracer concentrations atwetland inflows and outflows. We used two ideal reactormodel solutions, a continuous flowstirred tank reactor (CFSTR) and a plug flow reactor (PFR), to bracket real non-ideal systems. From those models, estimated transpiration ranged from 55% (CFSTR) to 74% (PFR) of total evapotranspiration (ET) rates, consistent with published values using standard methods and direct measurements. The PFR model more appropriately represents these nonideal agricultural wetlands in which check ponds are in series. Using a fluxmodel, we also developed an equation delineating the root zone depth at which diffusive dominated fluxes transition to advective dominated fluxes. This relationship is similar to the Peclet number that identifies the dominance of advective or diffusive fluxes in surface and groundwater transport. Using diffusion coefficients for inorganic mercury (Hg) and methylmercury (MeHg) we calculated that during high ET periods typical of summer, advective fluxes dominate root zone transport except in the top millimeters below the sediment–water interface. The transition depth has diel and seasonal trends, tracking those of ET. Neglecting this pathway has profound implications: misallocating loads along different hydrologic pathways; misinterpreting seasonal and diel water quality trends; confounding Fick's First Law calculations when determining diffusion fluxes using pore water concentration data; and misinterpreting biogeochemicalmechanisms affecting dissolved constituent cycling in the root zone. In addition,our understanding of internal root zone cycling of Hg and other dissolved constituents, benthic fluxes, and biological irrigation may be greatly affected.

Science of the Total Environment↗

Porewater dynamics of silver, lead and copper in coastal sediments and implications for benthic metal fluxes

To determine the conditions that lead to a diffusive release of dissolved metals from coastal sediments, porewater profiles of Ag, Cu, and Pb have been collected over seven years at two contrasting coastal sites in Massachusetts, USA. The Hingham Bay (HB) site is a contaminated location in Boston Harbor, while the Massachusetts Bay (MB) site is 11 km offshore and less impacted. At both sites, the biogeochemical cycles include scavenging by Fe-oxyhydroxides and release of dissolved metals when Fe-oxyhydroxides are reduced. Important differences in the metal cycles at the two sites, however, result from different redox conditions. Porewater sulfide and seasonal variation in redox zone depth is observed at HB, but not at MB. In summer, as the conditions become more reducing at HB, trace metals are precipitated as sulfides and are no longer associated with Fe-oxyhydroxides. Sulfide precipitation close to the sediment–water interface limits the trace metal flux in summer and autumn at HB, while in winter, oxidation of the sulfide phases drives high benthic fluxes of Cu and Ag, as oxic conditions return. The annual diffusive flux of Cu at HB is found to be significant and contributes to the higher than expected water column Cu concentrations observed in Boston Harbor. At MB, due to the lower sulfide concentrations, the association of trace metals with Fe-oxyhydroxides occurs throughout the year, leading to more stable fluxes. A surface enrichment of solid phase trace metals was found at MB and is attributed to the persistent scavenging by Fe-oxyhydroxides. This process is important, particularly at sites that are less reducing, because it maintains elevated metal concentrations at the surface despite the effects of bioturbation and sediment accumulation, and because it may increase the persistence of metal contamination in surface sediments.

Massachusetts↗

Holistic assessment of occurrence and fate of metolachlor within environmental compartments of agricultural watersheds

Background : Metolachlor [(RS)-2-Chloro- N -(2-ethyl-6-methyl-phenyl)- N -(1-methoxypropan-2-yl)acetamide] and two degradates (metolachlor ethane-sulfonic acid and metolachlor oxanilic acid) are commonly observed in surface and groundwater. The behavior and fate of these compounds were examined over a 12-year period in seven agricultural watersheds in the United States. They were quantified in air, rain, streams, overland flow, groundwater, soil water, subsurface drain water, and water at the stream/groundwater interface. The compounds were frequently detected in surface and groundwater associated with agricultural areas. A mass budget approach, based on all available data from the study and literature, was used to determine a percentage-wise generalized distribution and fate of applied parent metolachlor in typical agricultural environments. Results : In these watersheds, about 90% of applied metolachlor was taken up by plants or degraded, 10% volatilized, and 0.3% returned as rainfall. One percent was transported to surface water, while an equal amount infiltrated into the unsaturated zone soil water. < 0.02% reached the groundwater. Subsurface flow paths resulted in greater degradation of metolachlor because degradation reactions had more time to proceed. Conclusions : An understanding of the residence times of water in the different environmental compartments, and the important processes affecting metolachlor as it is transported along flowpaths among the environmental compartments allows for a degree of predictability of metolachlor's fate. Degradates with long half-lives can be used (in a limited capacity) as tracers of metolachlor, because of their persistence and widespread occurrence in the environment.

Science of the Total Environment↗

Evaluating the dynamics of groundwater, lakebed transport, nutrient inflow and algal blooms in Upper Klamath Lake, Oregon, USA

Transport of nutrients to lakes can occur via surface-water inflow, atmospheric deposition, groundwater (GW) inflow and benthic processes. Identifying and quantifying within-lake nutrient sources and recycling processes is challenging. Prior studies in hypereutrophic Upper Klamath Lake, Oregon, USA, indicated that ~60% of the early summer phosphorus (P) load to the lake was internal and hypothesized to be lakebed sediment release. Dynamic nutrient transport processes were examined to better characterize the nutrient sources. One-dimensional heat transport models calibrated to observed lakebed temperatures and a cross-sectional GW flow model provided estimates of GW-inflow rates that were greatest in spring and decreased through summer. One-dimensional solute transport models calibrated to observed lakebed pore-water dissolved silica (Si) and dissolved phosphate-phosphorus (DP) concentrations indicated that nutrients were transported from the lakebed by advection, diffusion, and enhanced mixing by benthic organisms and waves, and that DP removal occurred near the lakebed interface. Estimated water, Si, DP and total-phosphorus (TP) budgets indicated that GW contributed 21% of lake water inflow and at least 26, 20 and 16% of total Si, DP and TP inflow, respectively, when conservatively assuming background GW nutrient concentrations. However, lakebed GW (LGW) is enriched in nutrients during flow through lakebed sediment and the estimated GW contribution increased to 29 (33), 49 (67) and 43% (61%) of total Si, DP and TP inflow, respectively, if 20% (50%) of GW inflow to the lake was assumed to have LGW concentrations. Net nutrient inflow to the lake was greatest in spring and coincident with the annual diatom bloom. Inflowing dissolved nutrients appear to be assimilated by diatoms during the spring and become available for the summer Aphanizomenon flos-aquae bloom when the diatoms senesce. Thus, nutrient-enriched GW inflow and nutrient recycling by successive algal blooms must be considered when evaluating internal nutrient loading to lakes.

Oregon↗

PCB exposure is associated with reduction of endosymbionts in riparian spider microbiomes

Microbial communities, including endosymbionts, play diverse and critical roles in host biology and reproduction, but contaminant exposure may cause an imbalance in the microbiome composition with subsequent impacts on host health. Here, we examined whether there was a significant alteration of the microbiome community within two taxa of riparian spiders (Tetragnathidae and Araneidae) from a site with historical polychlorinated biphenyl (PCB) contamination in southern Ontario, Canada. Riparian spiders specialize in the predation of adult aquatic insects and, as such, their contaminant levels closely track those of nearby aquatic ecosystems. DNA from whole spiders from sites with either low or high PCB contamination was extracted, and spider microbiota profiled by partial 16S rRNA gene amplicon sequencing. The most prevalent shift in microbial communities we observed was a large reduction in endosymbionts in spiders at the high PCB site. The abundance of endosymbionts at the high PCB site was 63 % and 98 % lower for tetragnathids and araneids, respectively, than at the low PCB site. Overall, this has potential implications for spider reproductive success and food webs, as riparian spiders are critical gatekeepers of energy and material fluxes at the land-water interface.

Science of the Total Environment↗