Search USGS⌕ Search

SEARCH · Search USGS

Results for “Bulletin Seismological Society America”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources
USGS1985

High-frequency observations and source parameters of microearthquakes recorded at hard-rock sites

We have estimated the source parameters of 53 microearthquakes recorded in July 1983 which were aftershocks of the Miramichi, New Brunswick, earthquake that occurred on 9 January 1982. These events were recorded by local three-component digital seismographs at 400 sps/component from 2-Hz velocity transducers sited directly on glacially scoured crystalline basement outcrop. Hypocentral distances are typically less than 5 km, and the hypocenters and the seven digital seismograph stations established all lie essentially within the boundaries of a granitic pluton that encompasses the faults that ruptured during the main shock and major aftershocks. The P-wave velocity is typically 5 km/sec at the surface and at least 6 km/sec at depths greater than about 1 km.

Miramichi↗
USGS1985

Foreshocks and time-dependent earthquake hazard assessment in southern California

The probability that an earthquake in southern California (M ≧ 3.0) will be followed by an earthquake of larger magnitude within 5 days and 10 km (i.e., will be a foreshock) is 6 ± 0.5 per cent (1 S.D.), and is not significantly dependent on the magnitude of the possible foreshock between M = 3 and M = 5. The probability that an earthquake will be followed by an M ≧ 5.0 main shock, however, increases with magnitude of the foreshock from less than 1 per cent at M ≧ 3 to 6.5 ± 2.5 per cent (1 S.D.) at M ≧ 5. The main shock will most likely occur in the first hour after the foreshock, and the probability that a main shock will occur decreases with elapsed time from the occurrence of the possible foreshock by approximately the inverse of time. Thus, the occurrence of an earthquake of M ≧ 3.0 in southern California increases the earthquake hazard within a small space-time window several orders of magnitude above the normal background level.

California↗
USGS1985

General P, type-I S, and type-II S waves in anelastic solids; inhomogeneous wave fields in low-loss solids

The physical characteristics for general plane-wave radiation fields in an arbitrary linear viscoelastic solid are derived. Expressions for the characteristics of inhomogeneous wave fields, derived in terms of those for homogeneous fields, are utilized to specify the characteristics and a set of reference curves for general P and S wave fields in arbitrary viscoelastic solids as a function of wave inhomogeneity and intrinsic material absorption. The expressions show that an increase in inhomogeneity of the wave fields causes the velocity to decrease, the fractional-energy loss ( Q −1 ) to increase, the deviation of maximum energy flow with respect to phase propagation to increase, and the elliptical particle motions for P and type-I S waves to approach circularity. Q −1 for inhomogeneous type-I S waves is shown to be greater than that for type-II S waves, with the deviation first increasing then decreasing with inhomogeneity. The mean energy densities (kinetic, potential, and total), the mean rate of energy dissipation, the mean energy flux, and Q −1 for inhomogeneous waves are shown to be greater than corresponding characteristics for homogeneous waves, with the deviations increasing as the inhomogeneity is increased for waves of fixed maximum displacement amplitude. For inhomogeneous wave fields in low-loss solids, only the tilt of the particle motion ellipse for P and type-I S waves is independent to first order of the degree of inhomogeneity. Quantitative estimates for the characteristics of inhomogeneous plane body waves in layered low-loss solids are derived and guidelines established for estimating the effect of inhomogeneity on seismic body waves and a Rayleigh-type surface wave in low-loss media.

Bulletin of the Seismological Society of America↗
USGS1985

A general earthquake-observation system (GEOS)

Microprocessor technology has permitted the development of a General Earthquake-Observation System (GEOS) useful for most seismic applications. Central-processing-unit control via robust software of system functions that are isolated on hardware modules permits field adaptability of the system to a wide variety of active and passive seismic experiments and straightforward modification for incorporation of improvements in technology. Various laboratory tests and numerous deployments of a set of the systems in the field have confirmed design goals, including: wide linear dynamic range (16 bit/96 dB); broad bandwidth (36 hr to 600 Hz; greater than 36 hr available); selectable sensor-type (accelerometer, seismometer, dilatometer); selectable channels (1 to 6); selectable record mode (continuous, preset, trigger); large data capacity (1. 4 to 60 Mbytes); selectable time standard (WWVB, master, manual); automatic self-calibration; simple field operation; full capability to adapt system in the field to a wide variety of experiments; low power; portability; and modest costs. System design goals for a microcomputer-controlled system with modular software and hardware components as implemented on the GEOS are presented. The systems have been deployed for 15 experiments, including: studies of near-source strong motion; high-frequency microearthquakes; crustal structure; down-hole wave propagation; teleseismicity; and earth-tidal strains.

Bulletin of the Seismological Society of America↗
USGS1988

The northeastern Ohio earthquake of 31 January 1986: Was it induced?

On 31 January 1986, at 11:46 EST, an earthquake of mb = 5.0 occurred about 40 km east of Cleveland, Ohio, and about 17 km south of the Perry Nuclear Power Plant. The earthquake was felt over a broad area, including 11 states, the District of Columbia, and parts of Ontario, Canada, caused intensity VI-VII at distances of 15 km, and generated relatively high accelerations (0.18 g) of short duration at the Perry plant. Thirteen aftershocks were detected as of 15 April, with six occurring within the first 8 days. Two of the aftershocks were felt. Magnitudes for the aftershocks ranged from about 0.5 to 2.5. Focal depths for all of the earthquakes ranged from 2 to 6 km. Except for one small earthquake, all of the aftershocks occurred in a very tight cluster with a north-northeast orientation. Focal mechanisms of the aftershocks exhibit predominantly oblique right-slip motion on nearly vertical nodal planes oriented N15° to 45°E, with a nearly horizontal P axis north of east.

Ohio↗
USGS1988

Geometry of the Juan de Fuca plate beneath Washington and northern Oregon from seismicity

Earthquake hypocenters within the subducting Juan de Fuca plate beneath Washington and northern Oregon are interpreted as showing that the direction of plate dip changes from northeast beneath the Puget Sound region to east-southeast beneath southwestern Washington. The shallowest hypocenters within the Juan de Fuca plate are between 30- to 40-km depth, and the distribution of these events strikes north-northeast from near the mouth of the Columbia River to the northern Olympic Mountains. The distribution of hypocenters between 40 to 50 km generally strikes parallel with the shallowest events, but shows a significant broadening beneath the eastern Olympic Mountains and Puget Sound. Events with depths greater than 50 km south of the 1965 Seattle earthquake (mb = 6.5) strike north-northeast, approximately parallel with the shallower distributions; however, north of this event, the distribution of these deeper hypocenters strikes northwest. This change in the distribution of earthquake hypocenters reflects an upward arching of the Juan de Fuca plate plate beneath Puget Sound compared with the depth of the plate beneath southwestern Washington. The T axis calculated for the 1949 South Puget Sound earthquake (MS = 7.1) is oriented to the southeast, and the 20° plunge of the T axis is in good agreement with the plate dip angle determined from the earthquake hypocenters. We conclude that the 1949 earthquake resulted at least in part from down-dip tensional forces within the subducting Juan de Fuca plate. One consequence of the change in the direction of plate dip is that volcanic front in Washington is everywhere perpendicular to the dip of the Juan de Fuca plate.

Oregon, Washington↗
USGS1988

Parkfield, California, liquefaction prediction (USA)

The primary purpose of this short note is to formally record the liquefaction prediction (Holzer et al., 1986) made in connection with this predicted earthquake. In addition, this note serves to alert the seismic engineering community to special instrumentation being installed at the prediction site. The instrumentation will consist of 4 downhole accelerometers at depths ranging from 3-30 m, a surface accelerometer, 7 dynamic piezometers distributed in the sand strata between depths of 5 and 15 m, and a network of bench marks for measuring permanent ground deformation.

Califonia↗
USGS1988

Vertical seismic profiling of Oroville microearthquakes: Velocity spectra and particle motion as a function of depth

Direct evidence of site distortion of P - and S -wave microearthquake source spectra at Oroville, California, is presented. The data were gathered by placing vertical and three-component seismometers at 90 m intervals in a 500 m borehole through the Cleveland Hill normal fault, on which the 1975, M L = 5.7 Oroville earthquake took place. High-pressure, hydraulic locking mechanisms were used to firmly lock the seismometer packages against the borehole wall. Digital, event-triggering GEOS recorders were used to receive the data. Some 30 seismic events, including 12 microearthquakes, were recorded during the 4 months the seismometers were deployed. By comparing the velocity spectra of microearthquake waves at the different depths, it can be seen that scattering and attenuation in the shallow crust around the borehole dominantly affect high-frequency S waves. Above 15 Hz, the value of the apparent S -wave quality factor, Q as , for the upper 500 m of crust at this site is 9. One feature of this low Q as is a gross difference between S -wave “corner” frequencies observed at ground level and 500 m downhole. For example, the uphole and downhole S -wave corner frequencies for the M coda = 0.4 microearthquake of Julian Day 259 differ by a factor of 2 or more. Low quality factors and depth-dependent corner frequencies were also observed for P waves, but these data are less definitive due to lower signal-to-noise ratios. Based on their three-component particle motions and polarizations, the direct S waves of the microearthquakes appear to be composed of two phases, which have similar amplitudes but different apparent velocities. It is possible that the velocity differences are a result of anisotropy in the underlying rock.

California↗
USGS1988

Failure of self-similarity for large (Mw > 81/4) earthquakes

Compares teleseismic P-wave records for earthquakes in the magnitude range from 6.0-9.5 with synthetics for a self-similar, omega 2 source model and conclude that the energy radiated by very large earthquakes (Mw > 81/4) is not self-similar to that radiated from smaller earthquakes (Mw < 81/4). Furthermore, in the period band from 2 sec to several tens of seconds, it is concluded that large subduction earthquakes have an average spectral decay rate of omega -1.5. This spectral decay rate is consistent with a previously noted tendency of the omega 2 model to overestimate Ms for large earthquakes.

Bulletin of the Seismological Society of America↗
USGS1988

The seismic radiation from composite models of faulting

The failure of an asperity, i.e., the dynamic rupture of a small fault area with finite stress drop surrounded by a broken or weak fault area which has no stress drop but which slips after the asperity fails, is proposed as a model for the rupture process of a subevent in a composite earthquake. The rupture area of the composite earthquake surrounding the subevent is modeled by the weak fault area surrounding the asperity in the subevent model. The resulting seismic moment of the subevent is proportional to the stress drop and the rupture area of the subevent, as well as the radius of the composite earthaquake. By setting the stress drops of the asperity models equal to the dynamic stress drops of the subevents, the composite earthquake can be modeled as the sum of a set of subevents which cover the rupture area of the composite earthquake. The scaling of the high- and low-frequency radiation from composite earthquakes composed of asperities is commensurate with generally observed spectral scaling laws, in contrast to composite earthquakes composed of cracks, or smaller earthquakes. A simple filtering strategy is proposed for filtering the waveforms radiated by cracks to approximate the waveforms radiated by asperities. The P and S waves radiated by an ML = 5.2 earthquake which occurred on 9 May 1983, at Coalinga, California, are simulated using the P and S waves radiated by an ML = 3.6 aftershock. The aftershock waveforms are first filtered to approximate the radiation from asperities with the appropriate rupture areas, and then the waveforms of 12 asperity subevents are summed together to simulate the waveforms and spectra of the composite earthquake.

Bulletin of the Seismological Society of America↗
USGS1988

The Argos seismic data message system

A reliable, inexpensive method for sending limited daily seismic data messages from remote observatories to the National Earthquake Information Center has been developed for use with the Argos satellite system. Data messages are compressed on a microcomputer and passed automatically to a simple transmitter. About 4 hr later, the data are available at the National Earthquake Information Center, where they are decompressed and reformatted into standard telegrams for use in quick epicenter determinations. Epicenter data are available daily to the international scientific community.

Bulletin of the Seismological Society of America↗
USGS1988

Inversion for slip distribution using teleseismic P waveforms: North Palm Springs, Borah Peak, and Michoacan earthquakes

We have inverted the teleseismic P waveforms recorded by stations of the Global Digital Seismograph Network for the 8 July 1986 North Palm Springs, California, the 28 October 1983 Borah Peak, Idaho, and the 19 September 1985 Michoacan, Mexico, earthquakes to recover the distribution of slip on each of the faults using a point-by-point inversion method with smoothing and positivity constraints. In the inversion procedure, a fault plane with fixed strike and dip is placed in the region of the earthquake hypocenter and divided into a large number of subfaults. Rupture is assumed to propagate at a constant velocity away from the hypocenter, and synthetic ground motions for pure strike-slip and dip-slip dislocations are calculated at the teleseismic stations for each subfault. The observed seismograms are then inverted to obtain the distribution of strike-slip and dip-slip displacement for the earthquake.

California↗
USGS1988

Effects of three-dimensional velocity structure on the seismicity of the 1984 Morgan Hill, California, aftershock sequence

A three-dimensional velocity model for the area surrounding the 24 April 1984 Morgan Hill earthquake has been developed by simultaneously inverting local earthquake and refraction arrival-time data. This velocity model corresponds well to the surface geology of the region, predominantly showing a low-velocity region associated with the sedimentary sequence to the southwest of the Madrone Springs fault. This low-velocity sequence extends to a depth of approximately 5 km. Previously constructed geologic cross-sections for this region had suggested that these sediments extended to a depth of less than 2 km. Relocation of 2,179 hypocenters with the three-dimensional velocity model did not show great differences when compared to locations done with a one-dimensional velocity model with station corrections. In both cases, the Calaveras fault is steep but has a noticeable dip to the northeast and the seismicity does not intersect the surface along the trace of the Calaveras fault in the southern half of the rupture zone. The greatest differences between the two sets of locations was that the locations using the three-dimensional velocity model were deeper, and fewer earthquakes were located within the low-velocity region. The focal mechanisms were also determined for 946 earthquakes using both the one-dimensional and three-dimensional earth models. Both earth models yield similar focal mechanisms for these earthquakes.

California↗
USGS1988

Aftershock patterns and main shock faulting

We have compared aftershock patterns following several moderate to large earthquakes with the corresponding distributions of coseismic slip obtained from previous analyses of the recorded strong ground motion and teleseismic waveforms. Well-located aftershock hypocenters are projected onto the main shock fault plane, and their positions are examined relative to the zones of coseismic displacement indicated by the estimated distributions of main shock slip. We also examine the aftershock focal mechanisms, when these data are available, in an attempt to identify possible patterns of secondary faulting within the aftershock zone.

California↗
USGS1988

Crustal velocities near Coalinga, California, modeled from a combined earthquake/explosion refraction profile

Crustal velocity structure for the region near Coalinga, California, has been derived from both earthquake and explosion seismic phase data recorded along a NW-SE seismic-refraction profile on the western flank of the Great Valley east of the Diablo Range. Comparison of the two data sets reveals P-wave phases in common which can be correlated with changes in the velocity structure below the earthquake hypocenters. In addition, the earthquake records reveal secondary phases at station ranges of less than 20 km that could be the result of S- to P-wave conversions at velocity interfaces above the earthquake hypocenters. Two-dimensional ray-trace modeling of the P-wave travel times resulted in a P-wave velocity model for the western flank of the Great Valley comprised of: (a) a 7- to 9-km-thick section of sedimentary strata with velocities similar to those found elsewhere in the Great Valley (1.6 to 5.2 km/sec); (b) a middle crust extending to about 14 km depth with velocities comparable to those reported for the Franciscan assemblage in the Diablo Range (5.6 to 5.9 km/sec); and (c) a 13- to 14-km-thick lower crust with velocities similar to those reported beneath the Diablo Range and the Great Valley (6.5 to 7.30 km/sec). This lower crust may have been derived from subducted oceanic crust that was thickened by accretionary underplating or crustal shortening.

California↗