Search USGS⌕ Search

SEARCH · Search USGS

Results for “Scientific Data - Nature”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources

A Geochemical Mass-Balance Method for Base-Flow Separation, Upper Hillsborough River Watershed, West-Central Florida, 2003-2005 and 2009

Geochemical mass-balance (GMB) and conductivity mass-balance (CMB) methods for hydrograph separation were used to determine the contribution of base flow to total stormflow at two sites in the upper Hillsborough River watershed in west-central Florida from 2003-2005 and at one site in 2009. The chemical and isotopic composition of streamflow and precipitation was measured during selected local and frontal low- and high-intensity storm events and compared to the geochemical and isotopic composition of groundwater. Input for the GMB method included cation, anion, and stable isotope concentrations of surface water and groundwater, whereas input for the CMB method included continuous or point-sample measurement of specific conductance. The surface water is a calcium-bicarbonate type water, which closely resembles groundwater geochemically, indicating that much of the surface water in the upper Hillsborough River basin is derived from local groundwater discharge. This discharge into the Hillsborough River at State Road 39 and at Hillsborough River State Park becomes diluted by precipitation and runoff during the wet season, but retains the calcium-bicarbonate characteristics of Upper Floridan aquifer water. Field conditions limited the application of the GMB method to low-intensity storms but the CMB method was applied to both low-intensity and high-intensity storms. The average contribution of base flow to total discharge for all storms ranged from 31 to 100 percent, whereas the contribution of base flow to total discharge during peak discharge periods ranged from less than 10 percent to 100 percent. Although calcium, magnesium, and silica were consistent markers of Upper Floridan aquifer chemistry, their use in calculating base flow by the GMB method was limited because the frequency of point data collected in this study was not sufficient to capture the complete hydrograph from pre-event base-flow to post-event base-flow concentrations. In this study, pre-event water represented somewhat diluted groundwater. Streamflow conductivity integrates the concentrations of the major ions, and the logistics of acquiring specific conductance at frequent time intervals are less complicated than data collection, sample processing, shipment, and analysis of water samples in a laboratory. The acquisition of continuous specific conductance data reduces uncertainty associated with less-frequently collected geochemical point data.

Scientific Investigations Report↗

Evaluation of LiDAR-acquired bathymetric and topographic data accuracy in various hydrogeomorphic settings in the Deadwood and South Fork Boise Rivers, West-Central Idaho, 2007

High-quality elevation data in riverine environments are important for fisheries management applications and the accuracy of such data needs to be determined for its proper application. The Experimental Advanced Airborne Research LiDAR (Light Detection and Ranging)-or EAARL-system was used to obtain topographic and bathymetric data along the Deadwood and South Fork Boise Rivers in west-central Idaho. The EAARL data were post-processed into bare earth and bathymetric raster and point datasets. Concurrently with the EAARL surveys, real-time kinematic global positioning system surveys were made in three areas along each of the rivers to assess the accuracy of the EAARL elevation data in different hydrogeomorphic settings. The accuracies of the EAARL-derived raster elevation values, determined in open, flat terrain, to provide an optimal vertical comparison surface, had root mean square errors ranging from 0.134 to 0.347 m. Accuracies in the elevation values for the stream hydrogeomorphic settings had root mean square errors ranging from 0.251 to 0.782 m. The greater root mean square errors for the latter data are the result of complex hydrogeomorphic environments within the streams, such as submerged aquatic macrophytes and air bubble entrainment; and those along the banks, such as boulders, woody debris, and steep slopes. These complex environments reduce the accuracy of EAARL bathymetric and topographic measurements. Steep banks emphasize the horizontal location discrepancies between the EAARL and ground-survey data and may not be good representations of vertical accuracy. The EAARL point to ground-survey comparisons produced results with slightly higher but similar root mean square errors than those for the EAARL raster to ground-survey comparisons, emphasizing the minimized horizontal offset by using interpolated values from the raster dataset at the exact location of the ground-survey point as opposed to an actual EAARL point within a 1-meter distance. The average error for the wetted stream channel surface areas was -0.5 percent, while the average error for the wetted stream channel volume was -8.3 percent. The volume of the wetted river channel was underestimated by an average of 31 percent in half of the survey areas, and overestimated by an average of 14 percent in the remainder of the survey areas. The EAARL system is an efficient way to obtain topographic and bathymetric data in large areas of remote terrain. The elevation accuracy of the EAARL system varies throughout the area depending upon the hydrogeomorphic setting, preventing the use of a single accuracy value to describe the EAARL system. The elevation accuracy variations should be kept in mind when using the data, such as for hydraulic modeling or aquatic habitat assessments.

Idaho↗

Digital database of microfossil localities in Alameda and Contra Costa Counties, California

The eastern San Francisco Bay region (Contra Costa and Alameda Counties, California) is a geologically complex area divided by faults into a suite of tectonic blocks. Each block contains a unique stratigraphic sequence of Tertiary sediments that in most blocks unconformably overlie Mesozoic sediments. Age and environmental interpretations based on analysis of microfossil assemblages are key factors in interpreting geologic history, structure, and correlation of each block. Much of this data, however, is distributed in unpublished internal reports and memos, and is generally unavailable to the geologic community. In this report the U.S. Geological Survey microfossil data from the Tertiary sediments of Alameda and Contra Costa counties are analyzed and presented in a digital database, which provides a user-friendly summary of the micropaleontologic data, locality information, and biostratigraphic and ecologic interpretations.

California↗

A comment on "bats killed in large numbers at United States wind energy facilities"

Widespread reports of bat fatalities caused by wind turbines have raised concerns about the impacts of wind power development. Reliable estimates of the total number killed and the potential effects on populations are needed, but it is crucial that they be based on sound data. In a recent BioScience article, Hayes (2013) estimated that over 600,000 bats were killed at wind turbines in the United States in 2012. The scientific errors in the analysis are numerous, with the two most serious being that the included sites constituted a convenience sample, not a representative sample, and that the individual site estimates are derived from such different methodologies that they are inherently not comparable. This estimate is almost certainly inaccurate, but whether the actual number is much smaller, much larger, or about the same is uncertain. An accurate estimate of total bat fatality is not currently possible, given the shortcomings of the available data.

BioScience↗

Analysis of changes in water-level dynamics at selected sites in the Florida Everglades

The historical modification and regulation of the hydrologic patterns in the Florida Everglades have resulted in changes in the ecosystem of South Florida and the Florida Everglades. Since the 1970s, substantial focus has been given to the restoration of the Everglades ecosystem. The U.S. Geological Survey through its Greater Everglades Priority Ecosystem Science and National Water-Quality Assessment Programs has been providing scientific information to resource managers to assist in the Everglades restoration efforts. The current investigation included development of a simple method to identify and quantify changes in historical hydrologic behavior within the Everglades that could be used by researchers to identify responses of ecological communities to those changes. Such information then could be used by resource managers to develop appropriate water-management practices within the Everglades to promote restoration. The identification of changes in historical hydrologic behavior within the Everglades was accomplished by analyzing historical time-series water-level data from selected gages in the Everglades using (1) break-point analysis of cumulative Z-scores to identify hydrologic changes and (2) cumulative water-level frequency distribution curves to evaluate the magnitude of those changes. This analytical technique was applied to six long-term water-level gages in the Florida Everglades. The break-point analysis for the concurrent period of record (1978–2011) identified 10 common periods of changes in hydrologic behavior at the selected gages. The water-level responses at each gage for the 10 periods displayed similarity in fluctuation patterns, highlighting the interconnectedness of the Florida Everglades hydrologic system. While the patterns were similar, the analysis also showed that larger fluctuations in water levels between periods occurred in Water Conservation Areas 2 and 3 in contrast to those in Water Conservation Area 1 and the Everglades National Park. Results from the analysis indicate that the cumulative Z-score curve, in conjunction with cumulative water-level frequency distribution curves, can be a useful tool in identifying and quantifying changes in historical hydrologic behavior within the Everglades. In addition to the analysis, a spreadsheet application was developed to assist in applying these techniques to time-series water-level data at gages within the Everglades and is included with this report.

Florida↗

A bootstrap method for estimating uncertainty of water quality trends

Estimation of the direction and magnitude of trends in surface water quality remains a problem of great scientific and practical interest. The Weighted Regressions on Time, Discharge, and Season (WRTDS) method was recently introduced as an exploratory data analysis tool to provide flexible and robust estimates of water quality trends. This paper enhances the WRTDS method through the introduction of the WRTDS Bootstrap Test (WBT), an extension of WRTDS that quantifies the uncertainty in WRTDS-estimates of water quality trends and offers various ways to visualize and communicate these uncertainties. Monte Carlo experiments are applied to estimate the Type I error probabilities for this method. WBT is compared to other water-quality trend-testing methods appropriate for data sets of one to three decades in length with sampling frequencies of 6–24 observations per year. The software to conduct the test is in the EGRETci R-package.

Environmental Modelling and Software↗

Assessment of floodplain vulnerability during extreme Mississippi River flood 2011

Regional change in the variability and magnitude of flooding could be a major consequence of future global climate change. Extreme floods have the capacity to rapidly transform landscapes and expose landscape vulnerabilities through highly variable spatial patterns of inundation, erosion, and deposition. We use the historic activation of the Birds Point-New Madrid Floodway during the Mississippi and Ohio River Flooding of 2011 as a scientifically unique stress experiment to analyze indicators of floodplain vulnerability. We use pre- and postflood airborne Light Detection and Ranging data sets to locate erosional and depositional hotspots over the 540 km 2 agricultural Floodway. While riparian vegetation between the river and the main levee breach likely prevented widespread deposition, localized scour and deposition occurred near the levee breaches. Eroded gullies nearly 1 km in length were observed at a low ridge of a relict meander scar of the Mississippi River. Our flow modeling and spatial mapping analysis attributes this vulnerability to a combination of erodible soils, flow acceleration associated with legacy fluvial landforms, and a lack of woody vegetation to anchor soil and enhance flow resistance. Results from this study could guide future mitigation and adaptation measures in cases of extreme flooding.

Cairo, Illinois↗

Effort explores 130 Million years of Antarctic paleoenvironment

Antarctic climate history has been dominated by events and turning points with causes that are poorly understood. To fill the gaps in our knowledges new effort is underway in the international geologic community to acquire and coordinate the circum‐Antarctic geologic data needed to derive and model paleoenvironments of the past 130 m.y. The effort, which focuses principally on using shallow (<100 m) stratigraphic drilling and coring to acquire the geologic data, is being led by the Antarctic Offshore Stratigraphy Project (ANTOSTRAT), a group that works under the aegis of the Scientific Committee on Antarctic Research (SCAR). About 40 scientists from 12 countries met this past summer in Wellington, New Zealand, at an ANTOSTRAT meeting to discuss strategies for implementing the desired paleoenvironmental field and modeling studies. The meeting was held in conjunction with the 8th International Symposium on Antarctic Earth Sciences.

Eos, Transactions, American Geophysical Union↗

Mean squared error, deconstructed

As science becomes increasingly cross-disciplinary and scientific models become increasingly cross-coupled, standardized practices of model evaluation are more important than ever. For normally distributed data, mean squared error (MSE) is ideal as an objective measure of model performance, but it gives little insight into what aspects of model performance are “good” or “bad.” This apparent weakness has led to a myriad of specialized error metrics, which are sometimes aggregated to form a composite score. Such scores are inherently subjective, however, and while their components may be interpretable, the composite itself is not. We contend that, a better approach to model benchmarking and interpretation is to decompose MSE into interpretable components. To demonstrate the versatility of this approach, we outline some fundamental types of decomposition and apply them to predictions at 1,021 streamgages across the conterminous United States from three streamflow models. Through this demonstration, we hope to show that each component in a decomposition represents a distinct concept, like “season” or “variability,” and that simple decompositions can be combined to represent more complex concepts, like “seasonal variability,” creating an expressive language through which to interrogate models and data.

Journal of Advances in Earth Systems Modeling↗

The evolution of geospatial reasoning, analytics, and modeling

The field of geospatial analytics and modeling has a long history coinciding with the physical and cultural evolution of humans. This history is analyzed relative to the four scientific paradigms: (1) empirical analysis through description, (2) theoretical explorations using models and generalizations, (3) simulating complex phenomena and (4) data exploration. Correlations among developments in general science and those of the geospatial sciences are explored. Trends identify areas ripe for growth and improvement in the fourth and current paradigm that has been spawned by the big data explosion, such as exposing the ‘black box’ of GeoAI training and generating big geospatial training datasets. Future research should focus on integrating both theory- and data-driven knowledge discovery.

Book chapter↗

Consequences of land use and land cover change

The U.S. Geological Survey (USGS) Climate and Land Use Change Mission Area is one of seven USGS mission areas that focuses on making substantial scientific "...contributions to understanding how Earth systems interact, respond to, and cause global change". Using satellite and other remotely sensed data, USGS scientists monitor patterns of land cover change over space and time at regional, national, and global scales. These data are analyzed to understand the causes and consequences of changing land cover, such as economic impacts, effects on water quality and availability, the spread of invasive species, habitats and biodiversity, carbon fluctuations, and climate variability. USGS scientists are among the leaders in the study of land cover, which is a term that generally refers to the vegetation and artificial structures that cover the land surface. Examples of land cover include forests, grasslands, wetlands, water, crops, and buildings. Land use involves human activities that take place on the land. For example, "grass" is a land cover, whereas pasture and recreational parks are land uses that produce a cover of grass.

Fact Sheet↗

Scientific communications: Re-Os sulfide (bornite, chalcopyrite, and pyrite) systematics of the carbonate-hosted copper deposits at ruby creek, southern brooks range, Alaska

New Re-Os data for chalcopyrite, bornite, and pyrite from the carbonate-hosted Cu deposit at Ruby Creek (Bornite), Alaska, show extremely high Re abundances (hundreds of ppb, low ppm) and contain essentially no common Os. The Re-Os data provide the first absolute ages of ore formation for the carbonate-hosted Ruby Creek Cu-(Co) deposit and demonstrate that the Re-Os systematics of pyrite, chalcopyrite, and bornite are unaffected by greenschist metamorphism. The Re-Os data show that the main phase of Cu mineralization pre dominantly occurred at 384 ?? 4.2 Ma, with an earlier phase possibly at ???400 Ma. The Re-Os data are consistent with the observed paragenetic sequence and coincide with zircon U-Pb ages from igneous rocks within the Ambler metallogenic belt, some of which are spatially and genetically associated with regional volcanogenic massive sulfide deposits. The latter may suggest a temporal link between regional magmatism and hydrothermal mineralization in the Ambler district. The utility of bornite and chalcopyrite, in addition to pyrite, contributes to a new understanding of Re-Os geochronology and permits a refinement of the genetic model for the Ruby Creek deposit. ?? 2009 Society of Economices Geologists, Inc.

Economic Geology↗

Erosion monitoring along the Coosa River below Logan Martin Dam near Vincent, Alabama, using terrestrial light detection and ranging (T-LiDAR) technology

Alabama Power operates a series of dams on the Coosa River in east central Alabama. These dams form six reservoirs that provide power generation, flood control, recreation, economic opportunity, and fish and wildlife habitats to the region. The Logan Martin Reservoir is located approximately 45 kilometers east of Birmingham and borders Saint Clair and Talladega Counties. Discharges below the reservoir are controlled by power generation at Logan Martin Dam, and there has been an ongoing concern about the stability of the streambanks downstream of the dam. The U.S. Geological Survey, in cooperation with Alabama Power conducted a scientific investigation of the geomorphic conditions of a 115-meter length of streambank along the Coosa River by using tripod-mounted terrestrial light detection and ranging technology. Two surveys were conducted before and after the winter flood season of 2010 to determine the extent and magnitude of geomorphic change. A comparison of the terrestrial light detection and ranging datasets indicated that approximately 40 cubic meters of material had been eroded from the upstream section of the study area. The terrestrial light detection and ranging data included in this report consist of electronic point cloud files containing several million georeferenced data points, as well as a surface model measuring changes between scans.

Alabama↗

Second Projet de Renforcement Institutionnel du Secteur Minier de la République Islamique de Mauritanie (PRISM-II) Phase V

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗

Geologic map of Mauritania (phase V, deliverables 51a, 51b, and 51c)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗

Structure map of Mauritania (phase V, deliverables 52a and 52b)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗

Crystalline basement map of Mauritania derived from filtered aeromagnetic data (deliverable 54_1), Aeromagnetic and geological structure map of Mauritania (phase V, deliverable 54_2), Maximum depth to basement map of Mauritania derived from Euler analysis of Aeromagnetic data (phase V, deliverable 54_3), and color composite image of radioelement data (added value)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗