SEARCH · Search USGS

Results for “Journal of Maps”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources

USGS2015

Variations in community exposure to lahar hazards from multiple volcanoes in Washington State (USA)

Understanding how communities are vulnerable to lahar hazards provides critical input for effective design and implementation of volcano hazard preparedness and mitigation strategies. Past vulnerability assessments have focused largely on hazards posed by a single volcano, even though communities and officials in many parts of the world must plan for and contend with hazards associated with multiple volcanoes. To better understand community vulnerability in regions with multiple volcanic threats, we characterize and compare variations in community exposure to lahar hazards associated with five active volcanoes in Washington State, USA—Mount Baker, Glacier Peak, Mount Rainier, Mount Adams and Mount St. Helens—each having the potential to generate catastrophic lahars that could strike communities tens of kilometers downstream. We use geospatial datasets that represent various population indicators (e.g., land cover, residents, employees, tourists) along with mapped lahar-hazard boundaries at each volcano to determine the distributions of populations within communities that occupy lahar-prone areas. We estimate that Washington lahar-hazard zones collectively contain 191,555 residents, 108,719 employees, 433 public venues that attract visitors, and 354 dependent-care facilities that house individuals that will need assistance to evacuate. We find that population exposure varies considerably across the State both in type (e.g., residential, tourist, employee) and distribution of people (e.g., urban to rural). We develop composite lahar-exposure indices to identify communities most at-risk and communities throughout the State who share common issues of vulnerability to lahar-hazards. We find that although lahars are a regional hazard that will impact communities in different ways there are commonalities in community exposure across multiple volcanoes. Results will aid emergency managers, local officials, and the public in educating at-risk populations and developing preparedness, mitigation, and recovery plans within and across communities.

Washington↗

USGS2010

Mapping elevations of tidal wetland restoration sites in San Francisco Bay: Comparing accuracy of aerial lidar with a singlebeam echosounder

The southern edge of San Francisco Bay is surrounded by former salt evaporation ponds, where tidal flow has been restricted since the mid to late 1890s. These ponds are now the focus of a large wetland restoration project, and accurate measurement of current pond bathymetry and adjacent mud flats has been critical to restoration planning. Aerial light detection and ranging (lidar) has become a tool for mapping surface elevations, but its accuracy had rarely been assessed for wetland habitats. We used a singlebeam echosounder system we developed for surveying shallow wetlands to map submerged pond bathymetry in January of 2004 and compared those results with aerial lidar surveys in two ponds that were dry in May of 2004. From those data sets, we compared elevations for 5164 (Pond E9, 154 ha) and 2628 (Pond E14, 69 ha) echosounder and lidar points within a 0.375-m radius of each other (0.750-m diameter lidar spot size). We found that mean elevations of the lidar points were lower than the echosounder results by 5 ?? 0.1 cm in Pond E9 and 2 ?? 0.2 cm in Pond E14. Only a few points (5% in Pond E9, 2% in Pond E14) differed by more than 20 cm, and some of these values may be explained by residual water in the ponds during the lidar survey or elevation changes that occurred between surveys. Our results suggest that aerial lidar may be a very accurate and rapid way to assess terrain elevations for wetland restoration projects. ?? 2010 Coastal Education and Research Foundation.

Journal of Coastal Research↗

USGS2023

Barrier island reconfiguration leads to rapid erosion and relocation of a rural Alaska community

Coastal erosion is one of the foremost hazards that circumpolar communities face. Climate change and warming temperatures are anticipated to accelerate coastal change, increasing risk to coastal communities. Most erosion hazard studies for Alaska communities only consider linear erosion and do not anticipate coastal morphologic changes. This study showcases the possibility and consequence of accelerated erosion by examining a shift from stability to rapid erosion that forced the rural Alaska Native village of Meshik (now Port Heiden) to abandon the original town site and relocate inland. A combination of remote sensing, coastal surveys, and community-based monitoring are used to map coastal morphologic changes and identify erosion drivers. The community’s shoreline was stable until a protective barrier island eroded away. The exposure to open ocean waves, coupled with unconsolidated, low-density sediments, led to rapid erosion rates averaging of 5.8 ± 0.6 m/y from the 1970s to 2020s. The sudden and rapid erosion put great stress on Meshik and resulted in the loss of homes, erosion of a safe boat harbor, and pollution of the beach and bay. Erosion of the barrier island coincided with a period of greater storm activity and sea ice decline, but the exact cause for its erosion could not be determined. Many polar communities are built on or behind barriers and are on easily erodible soils such as sands and thawing permafrost. This study highlights the need to study, monitor, and predict morphologic change and regime shifts that can bring catastrophic impacts to coastal communities.

Alaska↗

USGS2019

Understanding organic matter heterogeneity and maturation rate by Raman spectroscopy

Solid organic matter (OM) in sedimentary rocks produces petroleum and solid bitumen when it undergoes thermal maturation. The solid OM is a ‘geomacromolecule’, usually representing a mixture of various organisms with distinct biogenic origins, and can have high heterogeneity in composition. Programmed pyrolysis is a common method to reveal bulk geochemical characteristics of the dominant OM, while detailed organic petrography is required to reveal information about the biogenic origin of contributing macerals. Despite the advantages of programmed pyrolysis, it cannot provide information about the heterogeneity of chemical compositions present in the individual OM types. Therefore, other analytical techniques such as Raman spectroscopy are necessary. In this study, we compared geochemical characteristics and Raman spectra of two sets of naturally and artificially matured Bakken source rock samples. A continuous Raman spectral map on solid bitumen particles was created from the artificially matured hydrous pyrolysis residues, in particular, to show the systematic chemical modifications in microscale. Spectroscopic data was plotted for both sets against thermal maturity to compare maturation rate/path for these two separate groups. The outcome showed that artificial maturation through hydrous pyrolysis does not follow the same trend as naturally-matured samples although having similar solid bitumen reflectance values (%SBRo). Furthermore, Raman spectroscopy of solid bitumen from artificially matured samples indicated the heterogeneity of OM decreases as maturity increases. This may represent an alteration in chemical structure towards more uniform compounds at higher maturity. This study may emphasize the necessity of using analytical methods such as Raman spectroscopy along with conventional geochemical methods to better reveal the underlying chemical structure of OM. Finally, observation by Raman spectroscopy of chemical alteration of OM during artificial maturation may assist in the proposal of improved pyrolysis protocols to better resemble natural geologic processes.

North Dakota↗

USGS2018

Geochemical and Pb isotopic characterization of soil, groundwater, human hair, and corn samples from the Domizio Flegreo and Agro Aversano area (Campania region, Italy)

A geochemical survey was carried out to investigate metal contamination in the Domizio Littoral and Agro Aversano area (Southern Italy) by means of soil, groundwater, human hair and corn samples. Pb isotope ratios were also determined to identify the sources of metals. Specifically, the investigation focused on topsoils ( n = 1064), groundwater ( n = 26), 25 human hair ( n = 24) and corn samples ( n = 13). Topsoils have been sampled and analysed in a previous study for 53 elements (including potentially harmful ones), and determined by ICP-MS after dissolving with aqua regia. Groundwater was analysed for 72 elements by ICP-MS and by ICP-ES. Samples of human hair were prepared and analysed for 16 elements by ICP-MS. Dried corn collected at several farms were also analysed for 53 elements by ICP-MS. The isotopic ratios of 206 Pb/ 207 Pb and 208 Pb/ 207 Pb in selected topsoil ( n = 24), groundwater ( n = 9), human hair ( n = 9) and corn ( n = 4) samples were analysed from both eluates and residues to investigate possible anthropogenic contamination and geogenic contributions. All data were processed and mapped by ArcGis software to produce interpolated maps and contamination factor maps of potentially harmful elements, in accordance with Italian Environmental Law (Legislative Decree 152/06). Results show that soil sampling sites are characterized by As, Cd, Co, Cr, Cu, Hg, Pb, Se, and Zn contents exceeding the action limits established for residential land use (RAL) and, in some cases, also the action limits for industrial land use (IAL) as established by Legislative Decree 152/06. A map of contamination factors and a map showing the degrees of contamination indicate that the areas in the municipalities of Acerra, Casoria and Giugliano have been affected by considerable anthropogenic-related pollution. To interpret the isotopic data and roughly estimate proportion of Pb from an anthropogenic source we broadly defined possible natural and anthropogenic Pb end-member fields based on literature data. For example, we summarized data for Vesuvius and Campi Flegrei volcanic rocks, gasoline, and aerosol deposits. Lead isotope data show mixing between geogenic and anthropogenic sources. Topsoil, groundwater, human hair and corn samples show a greater contribution from geogenic sources like the Yellow Tuff (from Campi Flegrei) and volcanic rocks from Mt. Vesuvius. Aerosols, fly ash and gasoline (anthropogenic sources) have also been contributors. In detail, 46% of the topsoil residues, 96% of topsoil leachates, 88% of groundwater, 90% of human hair, and 25% of corn samples indicate that > 50% percent of the lead in this area can be ascribed to anthropogenic activity.

Campania region↗

USGS2021

Ensemble species distribution model identifies survey opportunities for at-risk bearded beaksedge (Rhynchospora crinipes) in the southeastern United States

Locating additional occurrences of at-risk species can inform assessments of their status and conservation needs (including potential legal protections). The perennial bearded beaksedge ( Rhynchospora crinipes ) ranges from Mississippi to North Carolina, but known occurrences are limited. Because of the species' apparent rarity, a model to identify areas with suitable habitat conditions for the species will allow conservationists to effectively prioritize and allocate scarce surveying resources. We used known occurrence records, a suite of environmental datasets, and four species distribution modeling techniques (generalized additive, GAM; maximum entropy, MaxEnt; generalized boosted, GBM; and weighted ensemble) to generate maps to inform surveys for R. crinipes . The ensemble approach improved predictive performance (AUC-PR = 0.95) compared to other techniques (individual model AUC-PR ranged from 0.7 to 0.8). We also obtained quantitative insights on the species' habitat relationships, including the likelihood of R. crinipes 's presence near Atlantic white cedar ( Chamaecyparis thyoides ) habitat and floodplains, which is consistent with prior field observations. The ensemble model indicated that 3.6% of the study area could be suitable habitat, but only 0.38% had high suitability. Small stream riparian habitats and Atlantic swamp forests in Alabama, Florida, and Georgia had the highest proportion of suitable areas. Prioritizing surveys in areas with model-indicated high habitat suitability is expected to reveal additional R. crinipes occurrences. We suggest surveying efforts for other at-risk species may benefit from using an ensemble modeling approach to identify and prioritize survey areas and improve ecological knowledge of these species.

Alabama, Florida, Georgia, Mississippi, North Caro↗

USGS2016

Differential uplift and incision of the Yakima River terraces, central Washington State

The fault-related Yakima folds deform Miocene basalts and younger deposits of the Columbia Plateau in central Washington State. Geodesy implies ~2 mm/yr of NNE directed shortening across the folds, but until now the distribution and rates of Quaternary deformation among individual structures has been unclear. South of Ellensburg, Washington, the Yakima River cuts a ~600 m deep canyon across several Yakima folds, preserving gravel-mantled strath terraces that record progressive bedrock incision and related rock uplift. Here we integrate cosmogenic isochron burial dating of the strath terrace gravels with lidar analysis and field mapping to quantify rates of Quaternary differential incision and rock uplift across two folds transected by the Yakima River: Manastash and Umtanum Ridge. Isochron burial ages from in situ produced 26 Al and 10 Be at seven sites across the folds date episodes of strath terrace formation over the past ~2.9 Ma. Average bedrock incision rates across the Manastash (~88 m/Myr) and Umtanum Ridge (~46 m/Myr) anticlines are roughly 4 to 8 times higher than rates in the intervening syncline (~14 m/Myr) and outside the canyon (~10 m/Myr). These contrasting rates demonstrate differential bedrock incision driven by ongoing Quaternary rock uplift across the folds at rates corresponding to ~0.13 and ~0.06 mm/yr shortening across postulated master faults dipping 30 ± 10°S beneath the Manastash and Umtanum Ridge anticlines, respectively. The reported Quaternary shortening across the anticlines accounts for ~10% of the ~2 mm/yr geodetic budget, suggesting that other Yakima structures actively accommodate the remaining contemporary deformation.

Washington↗

USGS2018

Three-dimensional geophysical mapping of shallow water saturated altered rocks at Mount Baker, Washington: Implications for slope stability

Water-saturated hydrothermal alteration reduces the strength of volcanic edifices, increasing the potential for catastrophic sector collapses that can lead to far traveled and destructive debris flows. Intense hydrothermal alteration significantly lowers the resistivity and magnetization of volcanic rock and therefore hydrothermally altered rocks can be identified with helicopter electromagnetic and magnetic measurements. Geophysical models constrained by rock properties and geologic mapping show that intensely altered rock is restricted to two small (500 m diameter), >150 m thick regions around Sherman Crater and Dorr Fumarole Field at Mount Baker, Washington. This distribution of alteration contrasts with much thicker and widespread alteration encompassing the summits of Mounts Adams and Rainier prior to the 5600 year old Osceola collapse, which is most likely due to extreme erosion and the limited duration of summit magmatism at Mount Baker. In addition, the models suggest that the upper ~300 m of rock contains water which could help to lubricate potential debris flows. Slope stability modeling incorporating the geophysically modeled distribution of alteration and water indicates that the most likely and largest (~0.1 km 3 ) collapses are from the east side of Sherman Crater. Alteration at Dorr Fumarole Field raises the collapse hazard there, but not significantly because of its lower slope angles. Geochemistry and analogs from other volcanoes suggest a model for the edifice hydrothermal system.

Washington↗

USGS2000

Estimation of wave phase speed and nearshore bathymetry from video imagery

A new remote sensing technique based on video image processing has been developed for the estimation of nearshore bathymetry. The shoreward propagation of waves is measured using pixel intensity time series collected at a cross-shore array of locations using remotely operated video cameras. The incident band is identified, and the cross-spectral matrix is calculated for this band. The cross-shore component of wavenumber is found as the gradient in phase of the first complex empirical orthogonal function of this matrix. Water depth is then inferred from linear wave theory's dispersion relationship. Full bathymetry maps may be measured by collecting data in a large array composed of both cross-shore and longshore lines. Data are collected hourly throughout the day, and a stable, daily estimate of bathymetry is calculated from the median of the hourly estimates. The technique was tested using 30 days of hourly data collected at the SandyDuck experiment in Duck, North Carolina, in October 1997. Errors calculated as the difference between estimated depth and ground truth data show a mean bias of −35 cm (rms error = 91 cm). Expressed as a fraction of the true water depth, the mean percent error was 13% (rms error = 34%). Excluding the region of known wave nonlinearities over the bar crest, the accuracy of the technique improved, and the mean (rms) error was −20 cm (75 cm). Additionally, under low-amplitude swells (wave height H ≤ 1 m), the performance of the technique across the entire profile improved to 6% (29%) of the true water depth with a mean (rms) error of −12 cm (71 cm).

North Carolina↗

USGS2012

Fluvial transport and surface enrichment of arsenic in semi-arid mining regions: examples from the Mojave Desert, California

As a result of extensive gold and silver mining in the Mojave Desert, southern California, mine wastes and tailings containing highly elevated arsenic (As) concentrations remain exposed at a number of former mining sites. Decades of weathering and erosion have contributed to the mobilization of As-enriched tailings, which now contaminate surrounding communities. Fluvial transport plays an intermittent yet important and relatively undocumented role in the migration and dispersal of As-contaminated mine wastes in semi-arid climates. Assessing the contribution of fluvial systems to tailings mobilization is critical in order to assess the distribution and long-term exposure potential of tailings in a mining-impacted environment. Extensive sampling, chemical analysis, and geospatial mapping of dry streambed (wash) sediments, tailings piles, alluvial fans, and rainwater runoff at multiple mine sites have aided the development of a conceptual model to explain the fluvial migration of mine wastes in semi-arid climates. Intense and episodic precipitation events mobilize mine wastes downstream and downslope as a series of discrete pulses, causing dispersion both down and lateral to washes with exponential decay behavior as distance from the source increases. Accordingly a quantitative model of arsenic concentrations in wash sediments, represented as a series of overlapping exponential power-law decay curves, results in the acceptable reproducibility of observed arsenic concentration patterns. Such a model can be transferable to other abandoned mine lands as a predictive tool for monitoring the fate and transport of arsenic and related contaminants in similar settings. Effective remediation of contaminated mine wastes in a semi-arid environment requires addressing concurrent changes in the amounts of potential tailings released through fluvial processes and the transport capacity of a wash.

California↗

USGS2017

Partitioning of pyroclasts between ballistic transport and a convective plume: Kīlauea volcano, 19 March 2008

We describe the discrete ballistic and wind-advected products of a small, but exceptionally well-characterized, explosive eruption of wall-rock-derived pyroclasts from Kīlauea volcano on 19 March 2008 and, for the first time, integrate the size distribution of the two subpopulations to reconstruct the true size distribution of a population of pyroclasts as it exited from the vent. Based on thinning and fining relationships, the wind-advected fraction had a mass of 6.1 × 10 5 kg and a thickness half distance of 110 m, placing it at the bottom end of the magnitude and intensity spectra of pyroclastic falls. The ballistic population was mapped, in the field and by using structure-from-motion techniques, to a diameter of > 10–20 cm over an area of ~0.1 km 2 , with an estimated mass of 1 × 10 5 kg. Initial ejection velocities of 50–80 m/s were estimated from inversion of isopleths. The total grain size distribution was estimated by using a mass partitioning of 98% of wind-advected material and 2% of ballistics, resulting in median and sorting values of −1.7 ϕ and 3.1 ϕ . It is markedly broader than those calculated for the products of magmatic explosive eruptions, because the grain size of 19 March 2008 clast population is unrelated to a volcanic fragmentation event and instead was “inherited” from a population of talus clasts that temporary blocked the vent prior to the eruption. Despite a conspicuous near-field presence, the ballistic subpopulation has only a minor influence on the grain size distribution because of its rapid thinning and fining away from source.

Hawaii↗

USGS1973

Interpretation of depositional environment in the Plympton Formation (Permian), Southern Pequop Mountains, Nevada, from physical stratigraphy and a faunule

Field mapping in the southern part of the Pequop Mountains has shown the presence of a major structural high which has profoundly affected the stratigraphy of Pennsylvanian and Lower Permian beds; lesser effects of this high persisted into the later Permian. Within the Park City Group (Permian), the Plymton Formation, overlying the Kaibab Limestone, is divided informally into five parts. The uppermost Plympton has yielded silicified fossils. The faunule studied is characterized by the scaphopod Plagioglypta and by bellerophontacean and neritacean gastropods, suggestive of a middle Permian age. Specimens are worn, and several lines of evidence suggest that this is a high-energy beach deposit associated with a residual high. The interpretation supplements the field evidence of a hiatus between the Plympton and the overlying Gerster Formation. Other occurrences of elements of the faunule in the equivalent Phosphoria rock complex are noted, but only a few were probably deposited in a high-energy beach environment. A new species of Naticopsis that has the color pattern preserved is named and described.

Nevada↗

USGS2016

Constraining the relative importance of raindrop- and flow-driven sediment transport mechanisms in postwildfire environments and implications for recovery time scales

Mountain watersheds recently burned by wildfire often experience greater amounts of runoff and increased rates of sediment transport relative to similar unburned areas. Given the sedimentation and debris flow threats caused by increases in erosion, more work is needed to better understand the physical mechanisms responsible for the observed increase in sediment transport in burned environments and the time scale over which a heightened geomorphic response can be expected. In this study, we quantified the relative importance of different hillslope erosion mechanisms during two postwildfire rainstorms at a drainage basin in Southern California by combining terrestrial laser scanner-derived maps of topographic change, field measurements, and numerical modeling of overland flow and sediment transport. Numerous debris flows were initiated by runoff at our study area during a long-duration storm of relatively modest intensity. Despite the presence of a well-developed rill network, numerical model results suggest that the majority of eroded hillslope sediment during this long-duration rainstorm was transported by raindrop-induced sediment transport processes, highlighting the importance of raindrop-driven processes in supplying channels with potential debris flow material. We also used the numerical model to explore relationships between postwildfire storm characteristics, vegetation cover, soil infiltration capacity, and the total volume of eroded sediment from a synthetic hillslope for different end-member erosion regimes. This study adds to our understanding of sediment transport in steep, postwildfire landscapes and shows how data from field monitoring can be combined with numerical modeling of sediment transport to isolate the processes leading to increased erosion in burned areas.

California↗

USGS2007

Possible refugia in the Alexander Archipelago of southeastern Alaska during the late Wisconsin glaciation

The interpretation of the extent of late Wisconsin glaciation in southeastern Alaska has varied between geologists and biologists. Maps and reports of the region prepared by geologists commonly indicated that late Wisconsin ice extended as a large uniform front west to the edge of the continental shelf. However, the distribution of plants and animals in the region has led many biologists to suggest that there may have been ice-free areas that served as refugia during the late Wisconsin. Based on analyses of aerial photographs, topographic maps, and bathymetric charts, in conjunction with a review of previous literature and reconnaissance fieldwork throughout the region, this study presents data supporting a limited ice extent in the Alexander Archipelago during the late Wisconsin and identifies possible ice-free areas that may have served as refugia. These areas include (1) the Fairweather Ground, (2) the Herbert Graves Island area, (3) the western coast of southern Baranof Island and adjacent continental shelf, (4) Coronation Island and the adjacent continental shelf, (5) the Warren Island area, (6) the continental shelf from west of Heceta Island to Forrester Island in the south, (7) parts of the west coast of southern Dall Island, and (8) lowland areas in southern Prince of Wales Island. The identification of these possible refugia has bearing on the recolonization of the Alexander Archipelago, as they could have served as centers of biotic dispersal upon regional deglaciation and as stepping stones for early humans with a maritime tradition entering the western hemisphere from Asia. ?? 2007 NRC Canada.

Canadian Journal of Earth Sciences↗

USGS2012

Why the 2002 Denali fault rupture propagated onto the Totschunda fault: implications for fault branching and seismic hazards

The propagation of the rupture of the M w 7.9 Denali fault earthquake from the central Denali fault onto the Totschunda fault has provided a basis for dynamic models of fault branching in which the angle of the regional or local prestress relative to the orientation of the main fault and branch plays a principal role in determining which fault branch is taken. GeoEarthScope LiDAR and paleoseismic data allow us to map the structure of the Denali-Totschunda fault intersection and evaluate controls of fault branching from a geological perspective. LiDAR data reveal the Denali-Totschunda fault intersection is structurally simple with the two faults directly connected. At the branch point, 227.2 km east of the 2002 epicenter, the 2002 rupture diverges southeast to become the Totschunda fault. We use paleoseismic data to propose that differences in the accumulated strain on each fault segment, which express differences in the elapsed time since the most recent event, was one important control of the branching direction. We suggest that data on event history, slip rate, paleo offsets, fault geometry and structure, and connectivity, especially on high slip rate-short recurrence interval faults, can be used to assess the likelihood of branching and its direction. Analysis of the Denali-Totschunda fault intersection has implications for evaluating the potential for a rupture to propagate across other types of fault intersections and for characterizing sources of future large earthquakes.

Alaska↗

USGS2024

Detrital zircons and the magmatic history of Viti Levu, Fiji

We integrate the existing detrital zircon data from multiple modern river sediment samples on Viti Levu, Fiji, with the most current available geological and topographic mapping of the respective river drainage basins to compare detrital populations with potential bedrock sources. The temporal and spatial variations in zircon geochemistry supplement what is known from igneous rocks and confirm the petrological differences between plutonic and volcanic rocks from the Eocene to early Oligocene (Yavuna age, >30 Ma), middle Oligocene to middle Miocene (Wainimala age, 30–12.5 Ma), late Miocene (Colo age, 12.5–6.5 Ma) and latest Miocene (Namosi age, 6.5–5 Ma). The >30 Ma Yavuna-age zircons are restricted to areas that drain the previously mapped Yavuna Group. The 30–12.5 Ma zircons are found across central Viti Levu from west to east, and the 30–15 Ma zircons have distinctively low U/Yb and high Dy/Yb ratios. They are the best radiometric evidence of widespread early to middle Miocene arc magmatism in Fiji that was relatively U-poor. Peak deconvolution of the Colo age zircons from individual basins suggests the following ages for undated or poorly dated plutons from central Viti Levu. The large Mavuvu pluton is probably composed of multiple intrusions in the 12–10 Ma range, the Waiqa pluton is probably ca 10 Ma, and the Noikoro pluton is probably ca 9 Ma. There are zircons from unknown plutonic or volcanic sources between 8 and 7 Ma in western Viti Levu that have distinct Eu/Eu* ratios. We attribute the highest U/Yb ratios in some Colo age zircons to crustal anatexis. Namosi-age zircons are abundant in the Medrausucu Group and can be found scattered across Viti Levu.

Viti Levu↗

USGS1982

Dynamic ice-wallow relief of northern Alaska's nearshore

Contour maps with 0.5-m depth interval were prepared for a small area seaward of Reindeer Island, a barrier island in the Beaufort Sea, Alaska, by repeated surveys with very accurate navigation and very close trackline spacing. The maps reveal numerous closed depressions and mounds about 50 to 100 m in diameter and 2 to 3 m in relief, presumably related to grounded ice floes common in the area year round. Some of the features were obliterated over the course of three seasons while new ones formed. Although the depressions resemble kettles, they are formed by very different mechanisms. We believe that these bedforms represent erosion and deposition caused by: a) intensified flow around stationary ice floes serving as obstacles and b) pulsating currents generated by vertical oscillations or rocking motions of grounded floes in a seaway. Because sediment transport occurs around the ice, not where it directly touches the sea floor, the depressions are much larger than the base of the acting floes. Ice-wallow bedforms, although not found everywhere, are characteristic of arctic nearshore regions with non-cohesive sediments, and most likely occur in other ice-stressed coastal environments in differing degrees. The bedforms studied here are highly active and must be considered in planning nearshore construction activities.

Journal of Sedimentary Petrology↗

USGS1974

Stratiform chromitite at Campo Formoso, Bahia, Brazil

Serpentinized ultramafic rocks of pre-Minas age (Precambrian) crop out in an elongate belt 1 km wide and 15 km long on the west side of the Serra de Jacobina near Campo Formoso, Brazil. The original stratiform ultramafic body has been so metamorphosed, faulted, and eroded that only narrow dismembered segments occur along the thrust-faulted west side of the Serra de Jacobina. The most economically important segment is that near Campo Formoso where chromitite layers can be followed for about 8 km near the base of the intrusion. Three to five chromitite layers of minable thicknesses have been mapped, the thickest being 1.4 to 1.8 m. The aggregate thickness of chromitite is about 5 m and the average grade is about 43.5 percent Cr 2 0 3 . The Cr:Fe ratio ranges from 1.6:1 in weathered friable chromite to 3:1 in massive unweathered chromitite; in cleaned chromite concentrates the ratio is as much as 3.3:1. Estimates of indicated chromite ore reserves range from 16 to 20 million metric tons, of which only an estimated 6 million tons can profitably be mined. Factors preventing full exploitation of the chromite include (1) the local presence of as much as 7 m of overlying colluvium, (2) the extremely faulted character of the chromitite layers, (3) the presence of an overlying quartzite thrust plate very near the line of chromitite outcrops, and (4) the steep dips of the chromitite layers, 15° to 40° along the Pedrinhas-Limoeiro trends and 50° to 65° along the Cascabulhos trend.

Bahia↗