Search USGS⌕ Search

SEARCH · Search USGS

Results for “Clays and Clay Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS2012

Mineralogy and geochemistry of a sediment‐hosted hydrothermal sulfide deposit from the Southern Trough of Guaymas Basin, Gulf of California

Samples dredged from a 15‐m‐high hydrothermal mound atop the flat turbidite pond in the Southern Trough of Guaymas Basin consist of pyrrhotite‐rich massive sulfide, barite, barite + calcite, talc, and opaline silica as well as substrate material composed of fossiliferous, clay‐rich ooze. An 11‐m‐long sediment core taken near the dredge site shows increasing hydrothermal alteration with depth; anhydrite‐filled fractures near the base of the core appear to be channels for hydrothermal discharge. Oxidation of the sulfide‐rich samples to an assemblage of geothite, lepidocrocite, and amorphous Fe oxyhydroxide is ubiquitous. Compared to other massive sulfide deposits on sediment‐starved oceanic ridges, the hydrothermal deposit dredged in Guaymas Basin has a high pyrrhotite/pyrite ratio, a low Zn sulfide and combined ore metal (Cu + Zn + Pb + Ag + Cd) content, and a greater abundance of sulfate, carbonate, and silicate phases. Venting hydrothermal solutions are alkaline with moderately high p H; high Ca, Ba, and SiO 2 content; low ƒS 2 and ƒo 2 ; and very low transition metal content. Disequilibrium assemblages of pyrrhotite and sulfate minerals form during rapid mixing of this evolved vent fluid with ambient bottom waters at the discharge site. Talc is formed at a temperature near 270°C by mixing or entrainment of Mg‐rich bottom water or pore fluid with upwelling hydrothermal fluid that is saturated with silica. Calcite may precipitate from the alkaline, Ca‐rich fluid during degassing of CO 2 . The minimum temperature range for sulfide and nonsulfide deposition is approximately 190°–326°C. The composition of hydrothermal deposits, vent solutions, and altered sediment requires that circulating fluids evolve during deep penetration into the basaltic basement complex, further interaction with the organic‐and carbonate‐rich sediment pile, and near‐surface mixing with ambient seawater. Although the stable assemblage albite‐epidote‐clinochlore present at depth in the sediment pile requires very low dissolved Mg and Fe in the altering fluid, the addition of Mg to deeply buried sediment indicates significant recharge of the system by Guaymas Basin bottom water.

Southern Trough of Guaymas Basin↗
USGS2019

Identifying natural and anthropogenic variability of uranium at the well scale, Homestake Superfund site, near Milan, New Mexico, USA

The San Mateo Creek Basin in New Mexico, USA is located within the Grants Mineral Belt-an area with numerous uranium (U) ore deposits, mines, and milling operations. Six monitoring wells set in an alluvial aquifer near the Homestake Mining Co. Superfund site in the lower San Mateo Creek Basin were logged with a suite of borehole geophysical tools including spectral gamma-ray (SGR), vertically profiled with passive samplers for U and selenium (Se) concentrations, and purged sampled for same constituents. The integrated approach allowed for an assessment on the role of heterogeneity (both physical and chemical) in determining U concentrations in groundwater. Uranium, as measured with SGR logging, is ubiquitous in the alluvial aquifer and the underlying Chinle Group. Aqueous U concentrations appear to be inversely related to thorium (Th) concentrations, as measured by the SGR log, indicating the possibility that U is bound in or adsorbed to clays in the aquifer. The stratigraphy of the alluvium likely plays a role in elevated concentrations of aqueous U. Interbedded clay and sand layers allow for the mobilization of U in oxic sandy layers from U adsorbed in sediments in reduced clay layers. The stratigraphy also plays a role in the degree of mixing of groundwater in the formation and well. Mixing can obscure the ability to identify U sources. Mixing is exacerbated by the relatively long screens (> 20 ft long or > 6.1 m) of the monitoring wells.

New Mexico↗
USGS1954

First Fourteen Years of Lake Mead

This circular summarizes the results of recent studies of Lake Mead and its environs. Area-capacity tables, prepared on the basis of a hydrographic survey of the lake in 1948-49, show that the capacity of the reservoir was reduced 4.9 percent during the first 14 years after Hoover Dam was completed, but the usable capacity was reduced only 3.2 percent. Practically all of this reduction was caused by accumulation of sediment in the reservoir. Studies of inflow and outflow indicate that the reservoir has a total storage capacity about 12 percent greater than that shown by the area-capacity table, because of 'bank' storage, or ground-water storage in the bottom and sides of the reservoir. Thus the total capacity in 1949 was greater than the quantity shown by the original area-capacity table, even though large quantities of sediment had been deposited in the reservoir during the 14 years. According to computations of the volume and weight of the accumulated sediment, about 2,000 million tons were deposited in the reservoir by the Colorado River in 14 years; this is within 2 percent of the amount calculated from measurements of the suspended sediment carried by the in flowing rivers. It is estimated that the sediment capacity of the reservoir, when filled to the level of the permanent spillway crest, is about 75,000 million tons. The sediment contributed by the Colorado River averages about 45 percent sand and 55 percent silt and clay. If the sediment carried by the river in the years 1926-50 represents the long-term average rate of accumulation in Lake Mead, it will be a century before the sediment at the dam reaches the level of the lowest gates in the intake towers, and more than 4 centuries before the reservoir is filled with sediment to the level of the permanent spillway crest. The rate of sedimentation since the first year of Lake Mead (1935) has been about 20 percent lower, and if that rate continues in the future, the life of the reservoir will be correspondingly greater. Construction of upstream reservoirs to capture some of the inflowing sediment, or transportation of sediment in the outflow through Hoover Dam, would also increase the life of the reservoir. In the first 12 years of Lake Mead, the dissolved mineral matter in the outflowing water was significantly greater than the average in the in flowing water, owing in part to solution of gypsum and rock salt from the bed of the reservoir. Currently the increased dissolved solids in the outflowing water can be accounted for almost entirely by evaporation from the reservoir, which is about 5 fo 7 percent of the annual inflow. The water from Lake Mead is habitually of better quality than that diverted from the river for irrigation prior to regulation by Hoover Dam, because it represents an average of the poor water of low stages and the excellent water from melting snow. Geodetic surveys of the Lake Mead area show that the weight of water has caused subsidence of the earth's crust amounting to about 120 millimeter at Hoover Dam, and an even greater amount in the principal area of storage in the reservoir.

Circular↗
USGS2007

Dust emission from wet and dry playas in the Mojave Desert, USA

The interactions between playa hydrology and playa-surface sediments are important factors that control the type and amount of dust emitted from playas as a result of wind erosion. The production of evaporite minerals during evaporative loss of near-surface ground water results in both the creation and maintenance of several centimeters or more of loose sediment on and near the surfaces of wet playas. Observations that characterize the texture, mineralogic composition and hardness of playa surfaces at Franklin Lake, Soda Lake and West Cronese Lake playas in the Mojave Desert (California), along with imaging of dust emission using automated digital photography, indicate that these kinds of surface sediment are highly susceptible to dust emission. The surfaces of wet playas are dynamic - surface texture and sediment availability to wind erosion change rapidly, primarily in response to fluctuations in water-table depth, rainfall and rates of evaporation. In contrast, dry playas are characterized by ground water at depth. Consequently, dry playas commonly have hard surfaces that produce little or no dust if undisturbed except for transient silt and clay deposited on surfaces by wind and water. Although not the dominant type of global dust, salt-rich dusts from wet playas may be important with respect to radiative properties of dust plumes, atmospheric chemistry, windborne nutrients and human health.

California↗
USGS1994

The effect of a confining unit on the geochemical evolution of ground water in the Upper Floridan aquifer system

In west-central Florida, sections of the Upper Floridan aquifer system range in character from confined to leaky to unconfined. The confining unit is the Hawthorn Formation, a clay-rich sequence. The presence or absence of the Hawthorn Formation affects the geochemical evolution of the ground water in the Upper Floridan aquifer system. Mass-balance and mass-transfer models suggest that, in unconfined areas, the geochemical reactions are dolomite dissolution, ion exchange (Mg for Na, K), sulfate reduction, calcite dissolution, and CO 2 exchange. In the areas in which the Hawthorn Formation is leaky, the evolution of the ground water is accounted for by ion exchange, sulfate reduction, calcite dissolution, and CO 2 exchange. In the confined areas, no ion exchange and only limited sulfate reduction occur, and the chemical character of the ground water is consistent with dolomite and gypsum dissolution, calcite precipitation, and CO 2 ingassing. The Hawthorn Formation acts both as a physical barrier to the transport of CO 2 and organic matter and as a source of ion-exchange sites, but the carbonate-mineral reactions are largely unaffected by the extent of confinement of the Upper Floridan aquifer.

Journal of Hydrology↗
USGS1997

Channel-fill coal beds along the western margin of the Eastern Kentucky Coal Field

Four channel-filling coal beds from the lower part of the Breathitt Formation (lower Middle Pennsylvanian, late Westphalian A) were examined palynologically, petrographically and geochemically to determine the paleoenvironmental conditions under which these peats accumulated. These results were then compared with detailed sedimentological analyses of the strata overlying the coal in the channels to see if any genetic relationship between coal composition and the origin of the overburden could be drawn. All four of the coal beds used in this study are located in the western-most part of the Eastern Kentucky Coal Field and occur at, or near, the Early Pennsylvanian unconformity (0–30 m). Lycospora and Densosporites (and related crassicingulate taxa, e.g. Cristatisporites , Cingulizonates and Radiizonates ) dominate the studied assemblages, with Granulatisporites (and related trilete, sphaerotriangular genera, e.g. Leiotriletes and Lophotriletes ), Laevigatosporites and Schulzospora being common accessory genera. Petrographically, all four coals contain high percentages of vitrinite macerals (avg. 78.6% mineral matter free), moderate amounts of liptinite (or exinite) macerals (avg. 14.9%, mmf) and low percentages of inertinite macerals (avg. 6.5%, mmf). Strata above the coals consist of dark, carbonaceous shales, and heterolithic strata that exhibit varying degrees of bioturbation. Commonly occurring trace fossils include Arenicolites , Monocraterion , Planolites and Skolithos . Although marine-influenced strata, as determined from detailed sedimentology and ichnology (the study of trace fossils), covers all four coal beds, they are not uniformly high in total total sulfur content as might be expected. Rather they are extremely variable, ranging from 1–9% (dry basis) total sulfur. Ash yields are also variable ranging from 6.2–54.3% (dry basis). It is probable that the origin of the very first sediments covering the peat, as well as the amount of brackish water influence during peat accumulation, were important factors in determining the total sulfur content of the resultant coal. Initial sedimentation of fresh water clays and silts may have acted as a barrier to downward percolation/diffusion of sulfate bearing waters, or may have served as a site for sulfide formation, thereby keeping the total sulfur content of the underlying coal low. If initial sedimentation was of brackish or marine origin, as indicated by bioturbated laminae directly above the coal, or if the peat was subject to frequent brackish or marine water influence during accumulation, then sulfide generation might proceed unchecked, resulting in high sulfur coal.

International Journal of Coal Geology↗
USGS1972

Geohydrologic summary of the Pearl River basin, Mississippi and Louisiana

Fresh water in abundance is contained in large artesian reservoirs in sand and gravel deposits of Tertiary and Quaternary ages in the Pearl River basin, a watershed of 8,760 square miles. Shallow, water-table reservoirs occur in Quarternary deposits (Pleistocene and Holocene) that blanket most of the uplands in .the southern half of the basin and that are present in smaller upland areas and along streams elsewhere. The shallow reservoirs contribute substantially to dry-weather flow of the Strong River and Bogue Chitto and of Holiday, Lower Little, Silver, and Whitesand Creeks, among others. About 3 billion acre-feet of ground water is in storage in the fresh-water section, which extends from the surface to depths ranging from about sea level in the extreme northern part of the basin to more than 3,000 feet below sea level in the southern part of the basin. Variations in low flow for different parts of the river basin are closely related to geologic terrane and occurrence of ground water. The upland terrace belt that crosses the south-central part of the basin is underlain by permeable sand and gravel deposits and yields more than 0.20 cubic feet per second per square mile of drainage area to streamflow, whereas the northern part of the basin, underlain by clay, marl, and fine to medium sand, yields less than 0.05 cubic feet per second per square mile of drainage area (based on 7-day Q2 minimum flow computed from records). Overall, the potential surface-water supplies are large. Because water is available at shallow depths, most of the deeper aquifers have not been developed anywhere in the basin. At many places in the south, seven or more aquifers could be developed either by tapping one sand in each well or by screening two or more sands in a single well. Well fields each capable, of producing several million gallons of water a day are feasible nearly anywhere in the Pearl River basin. Water in nearly all the aquifers is of good to excellent quality and requires little or no treatment for most uses. The water is a soft, sodium bicarbonate type and therefore has a low to moderate dissolved-solids content. Mineral content increases generally downdip in an aquifer. Excessive iron, common in shallow aquifers, is objectionable for some water uses. Water from the streams, except in salty tidal reaches, is less mineralized than ground water; in 10 sites the median dissolved-solids content in streamflow was 50 milligrams per liter or less. Moderately intensive ground-water development has been made in the Bogalusa area, Louisiana; at the Mississippi Test Facility, Hancock County, Miss. ; and in the Jackson area, Mississippi. Wells with pumping rates of 500 to 1,000 gallons per minute each are common throughout the Pearl River basin, and some deep wells flow more than 3,000 gallons per minute in the coastal lowland areas. Probably 20 million gallons per day of artesian water flows uncontrolled from wells in the southern part of the basin. Ground-water levels, except in the higher altitudes, are within 60 feet of the surface, and flowing wells are common in the valleys and in the coastal Pine Meadows. Decline of water level is a problem in only a few small areas. Saline water as a resource is available for development from aquifers and streams near the coast and from aquifers at considerable depth in most of the Pearl River basin. Pollution is a problem in oil fields and in reaches of some streams below sewage and other waste-disposal points. The basin estuary contains water of variable quality but has potential for certain water-use developments that will require special planning and management.

Water Supply Paper↗
USGS1976

Platinum deposits of the Goodnews Bay district, Alaska

Platinum placers were discovered in 1926 in a small area south of Goodnews Bay, in southwestern Alaska. Beginning in 1927, the placers were worked for 7 years by small-scale mining methods; in later years dragline excavators and a dredge were utilized. These deposits are important, not only because they are of high grade but because they are the only commercial source of platinum metals in the United States. The bedded rocks of this area are sedimentary and volcanic rocks of late Paleozoic(?) age that have been intruded by a variety of ultrabasic rocks. The platinum metals of the placers have been derived from a mass of dunite and related rocks that constitute the bedrock of Red Mountain in the upper valley of the Salmon River. The western headwater tributaries of this stream are the fluvial conduits that have produced all the placers in the valley of the river. The principal placers lie in two pay streaks, one in the valley floor of the Salmon River and the other in an ancient stream channel along the east side of this valley. The stream-channel deposit, called the bench pay streak, was formed in early Pleistocene time; its alluvial materials consist largely of clay derived from an ancient moraine believed to be of Nebraskan age. The valley-floor deposit, called the pay streak of the valley floor, consists of alluvial materials of fluvial and glaciofluvial origin whose ages range from Yarmouth to Holocene. Both channels contain high-grade placers that have yielded a large volume of platinum metals. The platinum metals of these deposits are contained mainly in two alloys intergrown in a pseudoeutectic fabric. The major alloy is mainly platinum, with a small amount of iridium, still smaller amounts of rhodium and palladium, and probably some osmium and ruthenium. The minor alloy is dominantly iridium and osmium with less platinum and still less ruthenium and rhodium. The compositions of these two alloys are somewhat variable but tend to approach constant mean values. A small amount of free gold is recovered with the platinum metals. In addition to these two alloys, minute amounts of five platinum minerals have been identified. The weighted mean percentages of platinum, iridium, osmium, ruthenium, rhodium, palladium, and gold, as mined from 1936 to 1972, are respectively 82.25, 11.32, 2.15, 0.17, 1.30, 0.38, and 2.43. The lodes from which these placers have been derived are, or have been, localized in the Red Mountain ridge, where the principal rocks are dunite and serpentinite. No lodes have been recognized, either because the platinum metals are sparsely distributed or because a large part of the platiniferous rock has been eroded. It is known, however, that the amounts of iridium, osmium, and ruthenium, or of osmiridium, decrease from south to north. Other generalizations regarding the composition and granularity of these metals have been deduced. The size and shape of the platinum lodes may have ranged from diffuse disseminations to high-grade concentrations in small loci. Under certain assumptions, the tenor of platinum metals in the dunite can be roughly approximated. Utilizing two totally different methods of computation, the mean tenor has been estimated to lie between 0.19 and 0.27 grain of platinum metals per cubic yard of dunite, or 0.014 to 0.023 gram per stere. No large low-grade deposits of commercial value are likely to be found, but it is possible that some small high-grade concentrations occur.

Alaska↗
USGS2013

Origin of the Sinai-Negev erg, Egypt and Israel: mineralogical and geochemical evidence for the importance of the Nile and sea level history

The Sinai–Negev erg occupies an area of 13,000 km 2 in the deserts of Egypt and Israel. Aeolian sand of this erg has been proposed to be derived from the Nile Delta, but empirical data supporting this view are lacking. An alternative source sediment is sand from the large Wadi El Arish drainage system in central and northern Sinai. Mineralogy of the Negev and Sinai dunes shows that they are high in quartz, with much smaller amounts of K-feldspar and plagioclase. Both Nile Delta sands and Sinai wadi sands, upstream of the dunes, also have high amounts of quartz relative to K-feldspar and plagioclase. However, Sinai wadi sands have abundant calcite, whereas Nile Delta sands have little or no calcite. Overall, the mineralogical data suggest that the dunes are derived dominantly from the Nile Delta, with Sinai wadi sands being a minor contributor. Geochemical data that proxy for both the light mineral fraction (SiO 2 /10–Al 2 O 3 + Na 2 O + K 2 O–CaO) and heavy mineral fraction (Fe 2 O 3 –MgO–TiO 2 ) also indicate a dominant Nile Delta source for the dunes. Thus, we report here the first empirical evidence that the Sinai–Negev dunes are derived dominantly from the Nile Delta. Linkage of the Sinai–Negev erg to the Nile Delta as a source is consistent with the distribution of OSL ages of Negev dunes in recent studies. Stratigraphic studies show that during the Last Glacial period, when dune incursions in the Sinai–Negev erg began, what is now the Nile Delta area was characterized by a broad, sandy, minimally vegetated plain, with seasonally dry anastomosing channels. Such conditions were ideal for providing a ready source of sand for aeolian transport under what were probably much stronger glacial-age winds. With the post-glacial rise in sea level, the Nile River began to aggrade. Post-glacial sedimentation has been dominated by fine-grained silts and clays. Thus, sea level, along with favorable climatic conditions, emerges as a major influence on the timing of dune activity in the Sinai–Negev erg, through its control on the supply of sand from the Nile Delta. The mineralogy of the Sinai–Negev dunes is also consistent with a proposed hypothesis that these sediments are an important source of loess in Israel.

Sinai-negev Erg↗
USGS1941

Geology and ground-water resources of the Lufkin area, Texas

This report covers Angelina County, Texas, of which Lufkin is the county seat, and parts of Nacogdoches and other adjacent counties. The area is underlain by a series of sands, clays, and shales of Eocene age that dip, in general, southward at an angle a little greater than that of the land surface, which also slopes southward, thus creating favorable artesian conditions. The formations cropping out in the area from north to south are the Wilcox group undifferentiated, the Carrizo sand, the Mont Selman formation, consisting of the Reklaw member, the Queen City sand member, and the Weches greensand member, the Sparta sand, the Cook Mountain and Yegua formations, and the Jackson group undifferentiated. Small supplies of potable water may be obtained from shallow wells in the outcrop areas of most of these formations. Only three of the formations appear to be likely to yield large supplies of water to wells, and in these the water is under sufficient artesian pressure in most places to cause wells to flow. The Yegua formation yields large amounts of water to some wells in the vicinity of Lufkin. However, the water is moderately mineralized and is not acceptable for municipal use except after dilution with surface water and treatment to reduce mineralization. Moreover, most of the wells in this formation yield only small quantities of water, which is highly mineralized. The Sparta sand appears to be likely to yield large supplies of water to wells throughout the northern part of Angelina County. The water, however, is moderately to highly mineralized and cannot be used for purposes that require water of good quality. The Carrizo sand promises to yield large quantities of water low in mineralization in northern Angelina County and southern Nacogdoches County. Computations indicate that the present southward flow through the formation is about 2,750,000 gallons a day, but pumping from wells and thus increasing the hydraulic gradient would greatly increase the flow. Considerable amounts of water will also be released from storage in the formation after pumping begins.

Water Supply Paper↗
USGS1970

Chemical indicators of subsurface temperature applied to hot spring waters of Yellowstone National Park, Wyoming, U.S.A.

Under favorable conditions the chemistry of hot springs may give reliable indications of subsurface temperatures and circulation patterns. These chemical indicators can be classified by the type of process involved: Indicator Dominant Process The silica geothermometer Solution-precipitation Alkali ratios Ion exchange Cl/(HCO 3 + CO 3 ) ratio Rock alteration by dissolved CO 2 Relative concentration of Partitioning owing to subsur- volatiles in spring water face boning All these indicators have certain limitations. The silica geothermometer gives results independent of the local mineral suite and gas partial pressures, but may be affected by dilution. Alkali ratios are strongly affected by the local mineral suite and the formation of complex ions. Carbonate-chloride ratios are strongly affected by subsurface P CO2 . The relative concentration of volatiles can be very misleading in high-pressure liquid systems. In Yellowstone National Park most thermal waters issue from hot, shallow aquifers with pressures in excess of hydrostatic by 2 to 6 bars and with large flows (the flow of hot spring water from the Park is greater than 4000 liters per second). These conditions should be ideal for the use of chemical indicators to estimate aquifer temperatures. In five drill holes aquifer temperatures were within 2°C of that predicted from the silica content of nearby hot springs; the temperature level off at a lower value than predicted in only one hole, and in four other holes drilling was terminated before the predicted aquifer temperature was reached. The temperature-Na/K ratio relationship does not follow any published experimental or empirical curve for water-feldspar or water-clay reactions. We suspect that ion exchange reactions involving zeolites in the Yellowstone rocks result in higher Na/K ratios at given temperatures than result from feldspar or clay reactions. Comparison of SiO 2 and Cl/(HCO 3 + CO 3 ) suggest that because of higher subsurface P CO2 in Upper Geyser Basin a given Cl/(HCO 3 + CO 3 ) ratio there means a higher temperature than in Lower Geyser Basin. No correlation was found in Yellowstone Park between the subsurface regions of highest temperature and the relative concentration of volatile components such as boron and ammonia.

Wyoming↗
USGS1983

Origin and character of loesslike silt in unglaciated south-central Yakutia, Siberia, U.S.S.R.

Loesslike silt mantles upland terraces and low plateaus throughout unglaciated south-central Yakutia but is thickest along the south side of the lower Aldan River valley and the east side of the Lena River valley. The silt is probably loess deposited during glacial advances by winds blowing southward from the Verkhoyansk Range and eastward across the broad vegetation-free flood plain of the braided Lena River. The well-sorted uniform tan silt is well displayed along the Aldan and Lena Rivers; the thickest exposure measured, more than 60 m, is on the Tyungyulyu Terrace on the east side of the Lena River. On the west side of the valley, it is 10-25 m thick but thins rapidly to a featheredge west of Yakutsk. Almost all scarps along the south side of the Aldan River are capped by 10-35 m of silt. The texture and mineral composition of the loess like silt are uniform throughout south-central Yakutia, whether it overlies limestone, poorly consolidated sandstone, alluvium, and glacial outwash. All silt samples examined contained a high percentage of quartz and feldspar. The silt stands in sheer cliffs and is massive, with little or no stratification. The origin of the loesslike silt has been ascribed to disintegration in place of country rock by a marine, estuarine, lacustrine, fluvial, residual, or eolian source, or to a combination of these processes. The marine and estuarine hypotheses have never had strong support, but the lacustrine, fluvial, and residual hypotheses have been advanced by many Soviet workers. The most widely accepted explanation of the origin of the upland silt is that it is a combination of lacustrine and alluvial deposits formed on great flood plains and marshy plains. This origin is unlikely, however, because there are no shorelines, wave-cut beaches, deltas, mudcracks, or ripple marks. Neither distinct stratification nor an appreciable amount of clay exists in the silt. Moreover, there is no definite upper boundary to the deposits, as would be expected of lacustrine deposits. The loesslike silt has also been described as a residual deposit formed by the breakdown, by freezing and thawing, of the underlying rocks. The silt bears no chemical, mineralogic, or textural relation to the underlying strata, however, and it is too thick to represent only breakdown of rocks in place. The widespread mantle of uniform loesslike silt is here considered to be windblown, derived from glacial outwash in braided streams and on broad plains, because: (1) it occurs as a surficial mantle; (2) it is lithologically independent of the underlying material; (3) it is stratified indistinctly or not at all, except in retransported material; (4) it is associated with sand dunes; (5) it contains fossils of land animals; (6) its sorting and texture are similar to that of loess and windblown dust from many places elsewhere in the world; (7) its grains are angular and relatively unweathered.

Professional Paper↗
USGS1945

Ground-water resources of the El Paso area, Texas

El Paso, Tex., and Ciudad Juarez, Chihuahua, Mexico, and the industries in -that area draw their water supplies from wells, most of which are from 600 to 800 feet deep. In 1906, the estimated average pumpage there was about 1,000,000 gallons a day, and by 1935 it had increased to 15,400,000 gallons a day. The water-bearing beds, consisting of sand and gravel interbedded wire clay, tie in the deep structural trough known as the Hueco bolson, between the Organ and Franklin Mountains on the west, the Hueco, Finlay, and Malone Mountains on the east, the Tularosa Basin on the north, and the mountain ranges of Mexico on the south. From the gorge above El Paso to that beginning near Fort Quitman, about 90 miles southeast .of El Paso, the Rio Grande has eroded a flat-bottomed, steepwalled valley, 6 to 8 miles wide and 225 to 350 feet deep. No other large drainage channels have been developed on the bolson. The valley is known as the El Paso Valley, and the uneroded upland part of the bolson is called the Mesa. In the lowest parts of the El Paso Valley, the water-table is nearly at the surface. The quality of the underground water in the valley varies greatly both vertically and laterally. To a depth of about 400 to 500 feet it is in general too highly mineralized for municipal use, but between about. 500 and 900 feet good water may be obtained from several beds. In the beds between 500 and 900 feet the water level in wells is in places as. much as 20 feet lower than that in the shallow beds. Beneath the Mesa the water level .varies from about 200 feet beneath the surface, where the ground elevation is least, to about 400 feet. where it is highest. The water beneath the Mesa in general is of satisfactory quality and contains less than 500 parts per million of dissolved solids. Two cones of depression in the water table have been formed by the pumping near El Paso--one m the vicinity of the Mesa well field, the other around the Montana well field in the valley. The water released from storage by the formation of the cone centering in the Mesa field was calculated at 22,000 acre-feet, but the total pumpage was estimated to have been 90,000 acre-feet. Thus, about one-fourth of the total pumpage was taken from storage; the remaining three-fourths and apparently was taken from recharge. About 210,000 acre-feet of water has been pumped from the cone of depression in the El Paso Valley in and near El Paso. The volume of this cone could not be determined because there are artesian conditions in this area. Computations were made of the amount of water that would be recovered from storage if, for a distance of 10 miles north of the Mesa well field, the water level in a series of wells were drawn down the same amount as the present drawdown in the wells in that field. The water that would be recovered from storage in the formation 0f this depression in the ground water surface was calculated at about 130,000 acre-feet, the equivalent of about 70 years' supply at the 1935 rate of pumping.It is, of course, available in addition to the annual recharge. The sudden increase in 1924 in the saltwater content of the water from El Paso well 3 (well 52), in the Montana well field, was shown to be the result of a leak in the casing at a depth of about 127 feet, and the well was successfully repaired during the investigation. However, the chloride content of all of the wells in the field has been increasing gradually. This may indicate that salty water is being pulled in from considerable distances or that the barriers between the fresh-water-bearing beds and the saltwater-bearing beds above-them are not capable of preventing vertical movement of the ground water. The fact that in the valley the static water level in the shallow beds yielding poor water is higher than that in the deeper beds is disquieting, and if the level in the lower beds continues to decline, seepage from the river will eventually force the shallow highly mineralized water

Water Supply Paper↗
USGS2017

Paleobiology of the Sand Beneath the Valders Diamicton at Valders, Wisconsin

Previously undescribed pollen, plant macrofossils, molluscs, and ostracodes were recovered from a 2.5-m-thick glaciolacustrine unit of silty sand and clay at Valders, Wisconsin. The interstadial sediment was deposited about 12,200 14C yr B.P. after retreat of the Green Bay lobe that deposited diamicton of the Horicon Formation, and before advance of the Lake Michigan lobe that deposited the red-brown diamicton of the Valders Member of the Kewaunee Formation. Fluctuations of abundance of Candona subtriangulata, Cytherissa lacustris, and three other species define four ostracode biozones in the lower 1.7 m, suggesting an open lake environment that oscillated in depth and proximity to glacial ice. Pollen is dominated by Picea and Artemisia, but the low percentages of many other types of longdistance origin suggest that the terrestrial vegetation was open and far from the forest border. The upper part of the sediment, a massive sand deposited in either a shallow pond or a sluggish stream, contains a local concentration of plant macrofossils. The interpretation of a cold open environment is supported by the plant macrofossils of more than 20 species, dominated by those of open mineral soils (Arenaria rubella, Cerastium alpinum type, Silene acaulis, Sibbaldia procumbens, Dryas integrifolia, Vaccinium uliginosum var. alpinum, Armeria maritima, etc.) that in North America occur largely in the tundra and open tundra-forest ecotone of northern Canada. Ice-wedge casts occur in the sand. ?? 1998 University of Washington.

Quaternary Research↗
USGS1975

Water availability and geology of Hale County, Alabama

Geologic units that underlie and crop out in Hale County include the Tuscaloosa Group, Eutaw Formation, and Selma Group of Late Cretaceous age, and terrace deposits and alluvium of Quaternary age. The Cretaceous units dip southwest about 35 feet per mile and strike northwest. They consist chiefly of deposits of sand, gravel, chalk, and clay. Potential sources of large supplies of ground water are major aquifers in the Coker, Gordo, and Eutaw Formations; expected yields are 1.5 mgd (million gallons per day per well). Aquifers in the Eutaw Formation are the shallowest source of ground water in most of the county. The average annual runoff originating in Hale County is about 17 inches or 0.82 mgd per square mile. The Black Warrior River, largest potential source of surface water in the county, has an average flow of 5,800 mgd at gaging station 2-4660 near Eutaw and a median annual 7-day low flow of 349 mgd. Elliotts, Fivemile, Big Brush, and Big Prairie Creeks also are potential sources of surface water. These creeks have average flows ranging from 35 to 210 mgd and median annual 7-day low flows in excess of 2 mgd at their lower reaches. Water from most streams in the county contains less than 10 mg/l (milligrams per liter) chloride and ranges from soft to hard. The mineral content of water from Big Brush Creek is affected by salty water from a flowing well. Ground water from the major aquifers contains less than 250 mg/l chloride, except in the extreme northwestern and west-central parts of the county, and ranges from soft to very hard. Water from the aquifers generally contains iron in excess of 0.3 mg/l except in the southern part of the county. Water use in Hale County in 1968 was about 3.9 mgd, most of which was ground water. Less than one percent of the potential water resources is being utilized.

Alabama↗
USGS1988

The metal oxide fraction of pelagic sediment in the equatorial North Pacific Ocean: A source of metals in ferromanganese nodules

Pelagic sediment recovered at DOMES Site A in the equatorial North Pacific (151°W, 9° 15′N) consists of a surface homogeneous layer, approximately 10 cm thick, overlying a strongly mottled layer that is lighter in color. The radiolarian composition of both units is Quaternary. In areas where this sediment was only a few centimeters thick, the underlying sediment was early Tertiary. Clay mineralogy and major oxide composition of the two Quaternary sediments are uniform. Their similarity to continental shale suggests that the sediment has a terrigenous source. Clay mineralogy and major oxide composition of the Tertiary sediment also are uniform, although they differ markedly from the Quarternary sediment. In contrast to the major oxides, concentrations of Mn, Co, Cu, and Ni soluble in hydroxylamine hydrochlorideacetic acid are strongly different in the surface and subsurface Quaternary sediment. Mn and Ni exhibit pronounced depletions in the subsurface sediment, Ni slightly more than Mn. Cu is also depleted in the subsurface sediment, but less than Mn. It is also depleted in the subsurface Tertiary sediment, whereas the Mn concentration remains high. Concentration of Co relative to Mn increases into the subsurface Quaternary sediment to a constant Co:Mn ratio of 3 × 10 −2 . The trivalent REE (the REE exclusive of Ce) and Fe exhibit little down-core variation. Distribution of elements in these sediments is closely related to their concentration in associated surface ferromanganese nodules. The nodules are of two distinct types: those from the area where the Quaternary sediment is relatively thick have δ-MnO 2 as the dominant manganese mineral. The ratios of Ni:Mn, Cu:Mn, and Fe:Mn in these nodules approximate the corresponding ratios of the soluble fraction of surface sediment. Todorokite is the dominant mineral of nodules recovered from areas where the Quaternary sediment is thin. Relatively high Cu/Mn, Ni/Mn, and low Fe/Mn ratios of these nodules mirror differences between the soluble fraction of surface and subsurface Quaternary sediment. These compositional trends of sediment and nodules at DOMES Site A reflect a diagenetic origin for the todorokite nodules and a predominantly hydrogenous origin for the δ-MnO 2 nodules.

Geochimica et Cosmochimica Acta↗
USGS2004

Mineral, Energy, and Fertilizer Resources of the North Coast of Peru: Perspective from the Santa Rita B Archaeological Site

The Santa Rita B archaeological site is in the Chao Valley, approximately 65 km southeast of Trujillo, northern Peru. Location of Santa Rita B at the emergence of several drainages from the Andean cordillera is an important factor in the almost continuous occupation of the site over the past 3,000 years. Mineral resources are abundant throughout the Andes; however, the north coast of Peru was an important center for pre-Columbian mining, metallurgy, and craftsmanship. Success of the Chavin, Moche, Chimu, and other north coast cultures is directly related to the availability and exploitation of mineral and energy resources that include: gold (?silver), as electrum, mainly from placers, and copper from local oxide and carbonate occurrences and from sulfides related to copper porphyry occurrences in the cordillera. An alloy of these three metals is referred to as tumbaga, which is the primary material for Andean metalcraft. Anthracite was used for mirrors by north coast cultures and is available near Rio Chicama, Rio Santa, and east of Santa Rita B. These outcrops are a part of the Alto Chicama, Peru's largest coalfield, which extends from Rio Chicama, in the north, for 200 km southward to Rio Santa. Charcoal from the algorrobo tree and llama dung are considered to be the common pre-Columbian energy sources for cooking and metalwork; however, availability and the higher heat content of anthracite indicate that it was used in metallurgical applications. Bitumen is available from petroleum seeps near Talara, north of the study area, and may have been used as glue or as cement. Hematite, goethite, limonite, and manganese oxides from clay-altered volcanic rock may have provided color and material for ceramics. Guano from the Islas Gua?apes, Chinchas, and Ballestas was used as fertilizer for cotton and other crops.

Open-File Report↗
USGS2006

Hydrogeomorphic Classification of Wetlands on Mt. Desert Island, Maine, Including Hydrologic Susceptibility Factors for Wetlands in Acadia National Park

The U.S. Geological Survey, in cooperation with the National Park Service, developed a hydrogeomorphic (HGM) classification system for wetlands greater than 0.4 hectares (ha) on Mt. Desert Island, Maine, and applied this classification using map-scale data to more than 1,200 mapped wetland units on the island. In addition, two hydrologic susceptibility factors were defined for a subset of these wetlands, using 11 variables derived from landscape-scale characteristics of the catchment areas of these wetlands. The hydrologic susceptibility factors, one related to the potential hydrologic pathways for contaminants and the other to the susceptibility of wetlands to disruptions in water supply from projected future changes in climate, were used to indicate which wetlands (greater than 1 ha) in Acadia National Park (ANP) may warrant further investigation or monitoring. The HGM classification system consists of 13 categories: Riverine-Upper Perennial, Riverine-Nonperennial, Riverine- Tidal, Depressional-Closed, Depressional-Semiclosed, Depressional-Open, Depressional-No Ground-Water Input, Mineral Soil Flat, Organic Soil Flat, Tidal Fringe, Lacustrine Fringe, Slope, and Hilltop/Upper Hillslope. A dichotomous key was developed to aid in the classification of wetlands. The National Wetland Inventory maps produced by the U.S. Fish and Wildlife Service provided the wetland mapping units used for this classification. On the basis of topographic map information and geographic information system (GIS) layers at a scale of 1:24,000 or larger, 1,202 wetland units were assigned a preliminary HGM classification. Two of the 13 HGM classes (Riverine-Tidal and Depressional-No Ground-Water Input) were not assigned to any wetlands because criteria for determining those classes are not available at that map scale, and must be determined by more site-specific information. Of the 1,202 wetland polygons classified, which cover 1,830 ha in ANP, 327 were classified as Slope, 258 were Depressional (Open, Semiclosed, and Closed), 231 were Riverine (Upper Perennial and Nonperennial), 210 were Soil Flat (Mineral and Organic), 68 were Lacustrine Fringe, 51 were Tidal Fringe, 22 were Hilltop/Upper Hillslope, and another 35 were small open water bodies. Most small, isolated wetlands classified on the island are Slope wetlands. The least common, Hilltop/Upper Hillslope wetlands, only occur on a few hilltops and shoulders of hills and mountains. Large wetland complexes generally consist of groups of Depressional wetlands and Mineral Soil Flat or Organic Soil Flat wetlands, often with fringing Slope wetlands at their edges and Riverine wetlands near streams flowing through them. The two analyses of wetland hydrologic susceptibility on Mt. Desert Island were applied to 186 wetlands located partially or entirely within ANP. These analyses were conducted using individually mapped catchments for each wetland. The 186 wetlands were aggregated from the original 1,202 mapped wetland polygons on the basis of their HGM classes. Landscape-level hydrologic, geomorphic, and soil variables were defined for the catchments of the wetlands, and transformed into scaled scores from 0 to 10 for each variable. The variables included area of the wetland, area of the catchment, area of the wetland divided by the area of the catchment, the average topographic slope of the catchment, the amount of the catchment where bedrock crops out with no soil cover or excessively thin soil cover, the amount of storage (in lakes and wetlands) in the catchment, the topographic relief of the catchment, the amount of clay-rich soil in the catchment, the amount of manmade impervious surface, whether the wetland had a stream inflow, and whether the wetland had a hydraulic connection to a lake or estuary. These data were determined using a GIS and data layers mapped at a scale of 1:24,000 or larger. These landscape variables were combined in different ways for the two hydrologic susceptibility fact

Scientific Investigations Report↗