Quaternary geochronology using combined U-Pb and U-series methods: The opal perspective
No abstract available.
Conference Paper↗
SEARCH · Search USGS
Results for “Quaternary”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Geochronologic and isotope studies of calcite and silica constraining Quaternary unsaturated- and saturated zone hydrologic flux at Yucca Mountain, Nevada, USA
Both unsaturated- and saturated-zone aqueous solutions are capable of precipitating secondary mineral deposits that document the history and origins of past water flux. Calcite and opal occur as thin coatings on open fractures and cavity floors within the thick unsaturated zone at Yucca Mountain. Outermost surfaces of calcite have 14 C ages of between 44,000 and 16,000 radiocarbon years; however, the same surfaces have 230 Th/U ages from 28 ka to more than 500 ka. This discordance, along with negative covariance between conventionally calculated 230 Th/U ages and initial 234 U/ 238 U is best explained by very slow rates of mineral growth where discrete depositional layers are too fine to separate and measure individually. Therefore, isotopic analyses and resulting ages represent mixtures between the deepest and shallowest layers incorporated within a given sub-sample.
Nevada↗
Pliocene-Quaternary geology of northern New Jersey; road log and description of field stops, Sunday June 1, 1997
No abstract available.
New Jersey↗
Quaternary Park — Retrieval of lost satellite images from the late 20th Century
No abstract available.
Conference Paper↗
Ground-water resources of the lower Niobrara River and Ponca Creek basins, Nebraska and South Dakota
This report describes the area in north-central Nebraska and south-central South Dakota drained by Ponca Creek and by the Niobrara River below Valentine, Nebr. The Niobrara River and Ponca Creek are neighboring eastward flowing tributaries of the Missouri River. The Dakota sandstone of Cretaceous age is the oldest formation tapped by wells; the water it yields to wells in small to moderate quantities is rather highly mineralized and very hard; it is unsuitable for irrigation and most domestic uses. Overlying the Dakota, in ascending order, are the following formations of Cretaceous age: the Graneros shale, Greenhorn limestone, Carlile shale, Niobrara formation, and Pierre shale. None of these is a source of water supply. The Niobrara is the oldest formation exposed, cropping out in only the deeper valleys at the eastern end of the area. The Pierre shale, which is exposed much more extensively, crops out in the deeper valleys throughout nearly all the area. Except where the Niobrara River, its major tributaries, and Ponca Creek have cut their valleys into them, the Cretaceous rocks are overlain by semiconsolidated rocks of Tertiary age. Two Tertiary formations, the Brule and the Ogallala, are present in the area. The Brule formation underlies all the western part of the area and is exposed in the valleys of both the Niobrara and Keya Paha Rivers. The Ogallala formation, which overlaps the Brule, forms the upland on both sides of the river and is exposed in many places. The Brule is not a source of water supply, whereas the Ogallala yields small to moderately large quantities of water to many wells on the upland. The water in the Ogallala is of the calcium bicarbonate type and is moderately mineralized and hard. Unconsolidated deposits of Quaternary age mantle the Tertiary rocks throughout nearly all the upland area south of the Niobrara River and in parts of the upland area north of the river. They also floor the Niobrara River valley. Where saturated, these sediments, which consist of stream-deposited sand and gravel and wind-deposited sand, yield small to large amounts of water to wells. The water in the Quaternary deposits is of the calcium bicarbonate type but is less mineralized and softer than that in the Ogallala. The only significant source of recharge to the Dakota sandstone in the report area is underflow from the west. Except for waiter yielded to wells tapping the Dakota, water in the formation is discharged from the area by underflow to the east. In the upland part of the area, the Ogallala formation and the overlying deposits of Quaternary age constitute a single aquifer, water moving from one Into the other without apparent hindrance. This aquifer is recharged principally by the direct infiltration of precipitation but in part also by underflow from the west and south and by seepage from intermittent streams and ponds. Water is discharged from the upland aquifer by outflow through springs or seepage into streams, through the process of evapotranspiration, and by wells when they are pumped. Ground water leaves the report area by underflow where the Quaternary deposits in the valleys of the Niobrara River and Ponca Creek merge with the Quaternary deposits in the Missouri River valley. In places where the Niobrara formation, the Pierre shale, or the Brule formation is at the surface or is mantled by thin deposits of the Ogallala or thin deposits of Quaternary age, only meager amounts of ground water can be obtained unless wells are deep enough to tap the Dakota sandstone. Elsewhere the Ogallala formation and the deposits of Quaternary age generally yield ample water for domestic and stock supplies, and in some places, notably in the vicinity of Ainsworth, they yield enough water for irrigation. Additional large supplies of ground water could be obtained on the upland in the southwestern and west-central parts of the area. The report contains an annotated bibliography of previous publications on the geology and ground-water resources of the area, brief descriptions of the Cretaceous, Tertiary, and Quaternary rocks, a map showing the contour of the water table, logs of test holes and wells not published elsewhere, results of analyses of ground- and surface-water samples, and records of all wells of large discharge and representative wells of small discharge.
Nebraska, North Dakota↗
The metal oxide fraction of pelagic sediment in the equatorial North Pacific Ocean: A source of metals in ferromanganese nodules
Pelagic sediment recovered at DOMES Site A in the equatorial North Pacific (151°W, 9° 15′N) consists of a surface homogeneous layer, approximately 10 cm thick, overlying a strongly mottled layer that is lighter in color. The radiolarian composition of both units is Quaternary. In areas where this sediment was only a few centimeters thick, the underlying sediment was early Tertiary. Clay mineralogy and major oxide composition of the two Quaternary sediments are uniform. Their similarity to continental shale suggests that the sediment has a terrigenous source. Clay mineralogy and major oxide composition of the Tertiary sediment also are uniform, although they differ markedly from the Quarternary sediment. In contrast to the major oxides, concentrations of Mn, Co, Cu, and Ni soluble in hydroxylamine hydrochlorideacetic acid are strongly different in the surface and subsurface Quaternary sediment. Mn and Ni exhibit pronounced depletions in the subsurface sediment, Ni slightly more than Mn. Cu is also depleted in the subsurface sediment, but less than Mn. It is also depleted in the subsurface Tertiary sediment, whereas the Mn concentration remains high. Concentration of Co relative to Mn increases into the subsurface Quaternary sediment to a constant Co:Mn ratio of 3 × 10 −2 . The trivalent REE (the REE exclusive of Ce) and Fe exhibit little down-core variation. Distribution of elements in these sediments is closely related to their concentration in associated surface ferromanganese nodules. The nodules are of two distinct types: those from the area where the Quaternary sediment is relatively thick have δ-MnO 2 as the dominant manganese mineral. The ratios of Ni:Mn, Cu:Mn, and Fe:Mn in these nodules approximate the corresponding ratios of the soluble fraction of surface sediment. Todorokite is the dominant mineral of nodules recovered from areas where the Quaternary sediment is thin. Relatively high Cu/Mn, Ni/Mn, and low Fe/Mn ratios of these nodules mirror differences between the soluble fraction of surface and subsurface Quaternary sediment. These compositional trends of sediment and nodules at DOMES Site A reflect a diagenetic origin for the todorokite nodules and a predominantly hydrogenous origin for the δ-MnO 2 nodules.
Geochimica et Cosmochimica Acta↗
Geohydrologic framework of the Snake River plain regional aquifer system, Idaho and eastern Oregon
The Snake River Plain in southern Idaho is a major geologic structure of uncertain origin. Surface geology is generally well defined, but subsurface geology is poorly defined below about 500 feet. Rocks that underlie the plain form the framework for a regional ground-water system that supplies large quantities of water for irrigation and makes the plain nationally important in terms of agricultural production. The 15,600-square-mile Snake River Plain is a grabenlike structure that formed in middle Miocene time. The graben may have been formed by oblique extensional forces resulting from interactions between the North American and Pacific tectonic plates. The oldest known rocks underlying the plain, penetrated in a 14,007-foot-deep test hole northwest of Boise, are of middle Miocene age. Miocene volcanic rocks at the plain's margin that dip toward and underlie the plain were highly faulted and se- verely eroded before the plain was formed. Faults along the margins of the eastern part of the plain are not visible at land surface and have been defined chiefly by geo- physical methods. However, well-defined fault systems bound the western part of the plain. The eastern plain is underlain predominantly by Quaternary basalt of the Snake River Group, which is intercalated with sedimentary rocks along the margins. Basalt crops out or is less than 10 feet below land surface in the central part of the east- ern plain and is usually less than 100 feet below land surface elsewhere. Geophysical data and drillers' logs indicate that Quaternary basalt in the central part of the eastern plain is as much as 5,000 feet thick. A test hole about 10 miles northeast of the Snake River near Wendell provided the first information about deep subsurface stratigraphic relations in that part of the plain. The stratigraphic sequence penetrated in the test hole is similar to that in the north wall of the Snake River canyon be- tween Milner and King Hill. In that area, basalt of the Snake River Group thins toward the river and is underlain by sedi- mentary rocks and basalt of the Tertiary and Quaternary Idaho Group. The western plain is underlain mainly by unconsolidated and weakly consolidated Tertiary and Quaternary sedimentary rocks as much as 5,000 feet thick. Basalt also is present in the west- ern plain and is most extensive near Mountain Home. Quaternary basalt of the Snake River Group, which composes much of the Snake River Plain regional aquifer system, is highly transmissive. In the eastern plain, a thick sequence of thin- layered basalt flows yields large volumes of water to wells. Wells open to less than 100 feet of the aquifer yield as much as 7,000 gallons per minute; yields of 2,000 to 3,000 gallons per minute with only a few feet of drawdown are common. Transmissivity commonly exceeds 100,000 feet squared per day and, in places, 1 million feet squared per day. Large springs in the Snake River canyon between Milner and King Hill issue at the contact between highly transmissive pil- low lava and less transmissive underlying rocks. In 1980, ground-water discharge between Milner and King Hill, largely spring flow, averaged about 6,000 cubic feet per second. In the western plain, coarse-grained sedimentary deposits are thickest and transmissivity is highest along the northern mar- gins. The percentage of coarse-grained sedimentary deposits de- creases to the southwest, where lacustrine sedimentary deposits predominate. In most of the eastern plain, the upper part of the ground- water system is unconfined. At depth and in much of the west- ern plain, aquifers are confined. Across most of the plain, Quaternary basalt aquifers overlie aquifers in the Tertiary Idavada Volcanics and Banbury Basalt of the Idaho Group. The older volcanic rocks are typically much less transmissive than the Quaternary basalt. Faults and frac- tures are permeable zones for water storage and conduits for water movement. In places near the margins of the plain, the Idavada Volcanics contains important geothermal aquifers.
Idaho;Oregon↗
The southern Whidbey Island fault: An active structure in the Puget Lowland, Washington
Information from seismic-reflection profiles, outcrops, boreholes, and potential field surveys is used to interpret the structure and history of the southern Whidbey Island fault in the Puget Lowland of western Washington. This northwest-trending fault comprises a broad (as wide as 6–11 km), steep, northeast-dipping zone that includes several splays with inferred strike-slip, reverse, and thrust displacement. Transpressional deformation along the southern Whidbey Island fault is indicated by along-strike variations in structural style and geometry, positive flower structure, local unconformities, out-of-plane displacements, and juxtaposition of correlative sedimentary units with different histories. The southern Whidbey Island fault represents a segment of a boundary between two major crustal blocks. The Cascade block to the northeast is floored by diverse assemblages of pre-Tertiary rocks; the Coast Range block to the southwest is floored by lower Eocene marine basaltic rocks of the Crescent Formation. The fault probably originated during the early Eocene as a dextral strike-slip fault along the eastern side of a continental-margin rift. Bending of the fault and transpressional deformation began during the late middle Eocene and continues to the present. Oblique convergence and clockwise rotation along the continental margin are the inferred driving forces for ongoing deformation. Evidence for Quaternary movement on the southern Whidbey Island fault includes (1) offset and disrupted upper Quaternary strata imaged on seismic-reflection profiles; (2) borehole data that suggests as much as 420 m of structural relief on the Tertiary-Quaternary boundary in the fault zone; (3) several meters of displacement along exposed faults in upper Quaternary sediments; (4) late Quaternary folds with limb dips of as much as ≈9°; (5) large-scale liquefaction features in upper Quaternary sediments within the fault zone; and (6) minor historical seismicity. The southern Whidbey Island fault should be considered capable of generating large earthquakes (M s ≥7) and represents a potential seismic hazard to residents of the Puget Lowland.
Washington↗
Ground water east of Jackson Lake, Grand Teton National Park, Wyoming
The project area, which lies east of and adjacent to Jackson Lake is on the downthrown eastern block of the Teton fault, a normal fault that trends northward along the west edge of Jackson Lake. Rocks of pre-Cretaceous age are deeply buried beneath this area. Sedimentary rocks of Cretaceous age and sedimentary and volcanic rocks of Tertiary age, which have an aggregate thickness of about 30,000 feet, are exposed in the northern and eastern parts of the area. Along most of the east side of Jackson Lake, unconsolidated glacial and interglacial deposits of Quaternary age overlie the rocks of Cretaceous and Tertiary age. The unconsolidated deposits were penetrated by test drilling to a depth of 206 feet, but the maximum thickness is probably much greater. Test wells were drilled in five localities to evaluate the deposits of Quaternary age as possible sources of ground water for National Park Service facilities. In the Pilgrim Creek valley, test wells were capable of yielding 200 gpm (gallons per minute); properly constructed production wells could obtain much greater yields. Test wells at Lizard Point and Jackson Lake Campgrounds yielded more than 100 gpm, and a test well near the confluence of the Buffalo Fork and Snake rivers yielded 30 gpm. A test hole drilled in the NW1/4 sec. 36, T. 46 N., R. 115 W., was dry at 200 feet. Unconsolidated deposits of Quaternary age are the most promising source of additional ground water. Because of the extreme range in grain size and sorting, these deposits vary greatly in permeability. Their saturated thickness ranges from 0 to more than 130 feet and changes seasonally; variations of as much as 36 feet were measured (1961-62) in the Pilgrim Creek valley. In most localities where deposits of Quaternary age are ,present, small to moderate ground-water supplies can be developed; larger ground-water supplies can be developed in parts of the Pilgrim Creek valley. One well taps the Bivouac Formation of Late Pliocene or Pleistocene age, but no other wells are known to tap rocks of possible pre-Quaternary age. The Harebell Formation and Bacon Ridge Sandstone of Late Cretaceous age and the Bivouac Formation offer the best possibilities for development of additional water supplies from the consolidated rocks. Chemical analyses of water samples from 11 wells in the deposits of Quaternary age and 1 well in the Bivouac Formation indicate that the water is of generally good quality for drinking and most other purposes. Water from one well tapping lacustrine(?) sand had a dissolved-solids content of 321 ppm (parts per million); all other samples had from 87 to 145 ppm.
Wyoming↗
Evaluation of the location and recency of faulting near prospective surface facilities in Midway Valley, Nye County, Nevada
Evaluation of surface faulting that may pose a hazard to prospective surface facilities is an important element of the tectonic studies for the potential Yucca Mountain high-level radioactive waste repository in southwestern Nevada. For this purpose, a program of detailed geologic mapping and trenching was done to obtain surface and near-surface geologic data that are essential for determining the location and recency of faults at a prospective surface-facilities site located east of Exile Hill in Midway Valley, near the eastern base of Yucca Mountain. The dominant tectonic features in the Midway Valley area are the north- to northeast-trending, west-dipping normal faults that bound the Midway Valley structural block-the Bow Ridge fault on the west side of Exile Hill and the Paint-brush Canyon fault on the east side of the valley. Trenching of Quaternary sediments has exposed evidence of displacements, which demonstrate that these block-bounding faults repeatedly ruptured the surface during the middle to late Quaternary. Geologic mapping, subsurface borehole and geophysical data, and the results of trenching activities indicate the presence of north- to northeast-trending faults and northwest-trending faults in Tertiary volcanic rocks beneath alluvial and colluvial sediments near the prospective surface-facilities site. North to northeast-trending faults include the Exile Hill fault along the eastern base of Exile Hill and faults to the east beneath the surficial deposits of Midway Valley. These faults have no geomorphic expression, but two north- to northeast-trending zones of fractures exposed in excavated profiles of middle to late Pleistocene deposits at the prospective surface-facilities site appear to be associated with these faults. Northwest-trending faults include the West Portal and East Portal faults, but no disruption of Quaternary deposits by these faults is evident. The western zone of fractures is associated with the Exile Hill fault. The eastern zone of fractures is within Quaternary alluvial sediments, but no bedrock was encountered in trenches and soil pits in this part of the prospective surface facilities site; thus, the direct association of this zone with one or more bedrock faults is uncertain. No displacement of lithologic contacts and soil horizons could be detected in the fractured Quaternary deposits. The results of these investigations imply the absence of any appreciable late Quaternary faulting activity at the prospective surface-facilities site.
Nevada↗
Geology and ground-water resources of the northern part of the Ranegras Plain area, Yuma County, Arizona
The Ranegras Plain area is part of the Basin and Range province in west-central Arizona. The report discusses rocks of pre-Cambrian, pre-Cambrian (?), Paleozoic (?), Mesozoic (?), Cretaceous (?), Cretaceous and Tertiary, Tertiary (?), Quaternary (?), and Quaternary age. All the Paleozoic (?) and Cretaceous (?) rocks and parts of the Mesozoic (?),Cretaceous and Tertiary, and Tertiary (?) rocks have been mapped as a unit because they are so intensely faulted that detailed mapping was not practical. Rocks older than Quaternary form the mountain ranges bordering the Ranegras Plain. Quaternary alluvium underlies the broad, gently sloping valley floor to depths of generally a few hundred feet, locally more. Well logs indicate that the underlying Tertiary (?) alluvium exceeds 1,100 feet in thickness. The structure of the area is controlled by faulting typical of the Basin and Range province, but the major faults are covered by alluvium and are inferred from topographic features. Ground water occurs in Quaternary and Tertiary (?) alluvium and the best aquifers are in sand and gravel of the Quaternary alluvium. Ground-water movement is, in general, to the northwest. Recharge to the aquifers is predominantly from stream flow resulting from heavy rains. There is also minor or unevaluated recharge from underflow from Butler Valley to the east, andsince 1948seepage from irrigation. Discharge is by pumping and by natural processes of underflow and evapotranspiration. In addition to small domestic and stock wells, only two irrigation wells, in the vicinity of Utting, are in use. No accurate data on pumpage are available. The safe yield from the ground-water reservoir may be less than 5,000 acre-feet and probably does not exceed 10,000 to 15,000 acre-feet per year. The quality of ground water ranges from permissible to unsuitable for irrigation purposes. The fluoride content is generally too high for the water to be considered satisfactory for use by young children.
Open-File Report↗
Geology, hydrology, and water quality in the Fresno area, California
The Fresno area comprises about 1.400 square miles lying west of the foothills of the Sierra Nevada and east of the trough of the San Joaquin Valley. The rainfall averages less than 10 inches per year causing agricultural development to depend mainly on surface-water deliveries and ground-water pumpage. Surface-water deliveries and ground-water pumpage, however, vary considerably from year to year. For example, in agricultural year 1958 (April 1, 1958-March 31, 1959) surface-water deliveries were about 1,340,000 acre-feet and agricultural ground-water pumpage was about 1,740,000 acre-feet, but in agricultural year 1960 deliveries were only about 560,000 acre-feet and pumpage was about 2,520,000 acre-feet. Alluvial fans are the dominant geomorphic features in the area. Small alluvial fans have been formed near the foothills by the deposits from the numerous intermittent streams that lie both north and south of the Kings River. Thicker and much more extensive alluvial fans have been formed under most of the area by deposits from the San Joaquin and Kings Rivers. Geologic units in the area consist of consolidated rocks and unconsolidated deposits. In turn, consolidated rocks consist of basement complex of pre-Tertiary age and marine and continental sedimentary rocks of Cretaceous and Tertiary age. Unconsolidated deposits are of both Tertiary and Quaternary age. Most of the geologic units dip gently southwestward approximately paralleling the back slope of the Sierra Nevada. Although some of these geologic units are faulted, especially in the deep subsurface, faulting has not affected the occurrence and movement of fresh ground water. The basement complex crops out along the eastern border of the area and yields only small amounts of water to wells; the marine and continental sedimentary rocks do not crop out in the area and do not yield any water to wells. The unconsolidated deposits are divided into an older series of Tertiary and Quaternary age, and a younger series of Quaternary age. The continental deposits of Tertiary and Quaternary age crop out beneath the extreme southeastern part of the area and yield small amounts of water to wells, and the deposits of Quaternary age crop out over most of the area and yield more than 90 percent of the water pumped from wells. The deposits of Quaternary age in turn are divided into older alluvium, lacustrine and marsh deposits, younger alluvium, flood-basin deposits. and sand dunes. The older alluvium is by far the most important aquifer in the Fresno area. It consists of intercalated lenses of clay, silt, silty and sandy clay, clayey and silty sand, sand, gravel, cobbles, and boulders, and in general it is fine grained near the trough of the valley and beneath the alluvial fans of intermittent streams. In the older alluvium, yields to wells range from less than 20 gpm (gallons per minute) to more than 3,000 gpm. The lacustrine and marsh deposits occur only in the subsurface in the western part of the area. Consisting mostly of silt and clay, they are virtually impermeable and thus restrict the vertical movement of water. These deposits from oldest to youngest are designated the E-clay, the C-clay, and the A-clay. The E-clay is the thickest and most extensive of all the lacustrine and marsh deposits. Because the clays tend to confine ground water in the Fresno area, five water bodies are recognized. These are the unconfined water body, the shallow water body, the confined water body below the A-clay, the confined water body below the C-clay, and the confined water body below the E-clay. The unconfined water body underlies most of the Fresno area. The shallow and confined water bodies underlie parts of the extreme western part of the area. There, heads in successively underlying water bodies are less than those in overlying water bodies, indicating that some ground water moves slowly downward through the clays. From agricultural years 1957 to 1962, outflow in the area exceeded inflow. As a result, for this period, the Fresno area had a net deficit of about 2,890,000 acre-feet. This deficit was made up for mostly by a decline in ground water stored. Water levels in all water bodies have been declining over the years, yet when streamflow and canal deliveries are large they show a general rise. The general movement of ground water in the Fresno area is toward the southwest, although pumping depressions near Fresno and near the western part of the area, cause ground water to move northward, southward, and westward toward them.
California↗
Evaluating earthquake hazards in the Los Angeles region— An earth-science perspective
Potentially destructive earthquakes are inevitable in the Los Angeles region of California, but hazards prediction can provide a basis for reducing damage and loss. This volume identifies the principal geologically controlled earthquake hazards of the region (surface faulting, strong shaking, ground failure, and tsunamis), summarizes methods for characterizing their extent and severity, and suggests opportunities for their reduction. Two systems of active faults generate earthquakes in the Los Angeles region: northwest-trending, chiefly horizontal-slip faults, such as the San Andreas, and west-trending, chiefly vertical-slip faults, such as those of the Transverse Ranges. Faults in these two systems have produced more than 40 damaging earthquakes since 1800. Ninety-five faults have slipped in late Quaternary time (approximately the past 750,000 yr) and are judged capable of generating future moderate to large earthquakes and displacing the ground surface. Average rates of late Quaternary slip or separation along these faults provide an index of their relative activity. The San Andreas and San Jacinto faults have slip rates measured in tens of millimeters per year, but most other faults have rates of about 1 mm/yr or less. Intermediate rates of as much as 6 mm/yr characterize a belt of Transverse Ranges faults that extends from near Santa Barbara to near San Bernardino. The dimensions of late Quaternary faults provide a basis for estimating the maximum sizes of likely future earthquakes in the Los Angeles region: moment magnitude .(M) 8 for the San Andreas, M 7 for the other northwest-trending elements of that fault system, and M 7.5 for the Transverse Ranges faults. Geologic and seismologic evidence along these faults, however, suggests that, for planning and designing noncritical facilities, appropriate sizes would be M 8 for the San Andreas, M 7 for the San Jacinto, M 6.5 for other northwest-trending faults, and M 6.5 to 7 for the Transverse Ranges faults. The geologic and seismologic record indicates that parts of the San Andreas and San Jacinto faults have generated major earthquakes having recurrence intervals of several tens to a few hundred years. In contrast, the geologic evidence at points along other active faults suggests recurrence intervals measured in many hundreds to several thousands of years. The distribution and character of late Quaternary surface faulting permit estimation of the likely location, style, and amount of future surface displacements. An extensive body of geologic and geotechnical information is used to evaluate areal differences in future levels of shaking. Bedrock and alluvial deposits are differentiated according to the physical properties that control shaking response; maps of these properties are prepared by analyzing existing geologic and soils maps, the geomorphology of surficial units, and. geotechnical data obtained from boreholes. The shear-wave velocities of near-surface geologic units must be estimated for some methods of evaluating shaking potential. Regional-scale maps of highly generalized shearwave velocity groups, based on the age and texture of exposed geologic units and on a simple two-dimensional model of Quaternary sediment distribution, provide a first approximation of the areal variability in shaking response. More accurate depictions of near-surface shear-wave velocity useful for predicting ground-motion parameters take into account the thickness of the Quaternary deposits, vertical variations in sediment .type, and the correlation of shear-wave velocity with standard penetration resistance of different sediments. A map of the upper Santa Ana River basin showing shear-wave velocities to depths equal to one-quarter wavelength of a 1-s shear wave demonstrates the three-dimensional mapping procedure. Four methods for predicting the distribution and strength of shaking from future earthquakes are presented. These techniques use different measures of strong-motion
California↗
Hydrogeologic framework of the Wood River Valley aquifer system, south-central Idaho
The Wood River Valley contains most of the population of Blaine County and the cities of Sun Valley, Ketchum, Hailey, and Bellevue. This mountain valley is underlain by the alluvial Wood River Valley aquifer system, which consists primarily of a single unconfined aquifer that underlies the entire valley, an underlying confined aquifer that is present only in the southernmost valley, and the confining unit that separates them. The entire population of the area depends on groundwater for domestic supply, either from domestic or municipal-supply wells, and rapid population growth since the 1970s has caused concern about the long-term sustainability of the groundwater resource. As part of an ongoing U.S. Geological Survey effort to characterize the groundwater resources of the Wood River Valley, this report describes the hydrogeologic framework of the Wood River Valley aquifer system. Although most of the Wood River Valley aquifer system is composed of Quaternary-age sediments and basalts of the Wood River Valley and its tributaries, older igneous, sedimentary, or metamorphic rocks that underlie these Quaternary deposits also are used for water supply. It is unclear to what extent these rocks are hydraulically connected to the main part of Wood River Valley aquifer system and thus whether they constitute separate aquifers. Paleozoic sedimentary rocks in and near the study area that produce water to wells and springs are the Phi Kappa and Trail Creek Formations (Ordovician and Silurian), the Milligen Formation (Devonian), and the Sun Valley Group including the Wood River Formation (Pennsylvanian-Permian) and the Dollarhide Formation (Permian). These sedimentary rocks are intruded by granitic rocks of the Late Cretaceous Idaho batholith. Eocene Challis Volcanic Group rocks overlie all of the older rocks (except where removed by erosion). Miocene Idavada Volcanics are found in the southern part of the study area. Most of these rocks have been folded, faulted, and metamorphosed to some degree, thus rock types and their relationships vary over distance. Quaternary-age sediment and basalt compose the primary source of groundwater in the Wood River Valley aquifer system. These Quaternary deposits can be divided into three units: a coarse-grained sand and gravel unit, a fine-grained silt and clay unit, and a single basalt unit. The fine- and coarse-grained units were primarily deposited as alluvium derived from glaciation in the surrounding mountains and upper reaches of tributary canyons. The basalt unit is found in the southeastern Bellevue fan area and is composed of two flows of different ages. Most of the groundwater produced from the Wood River Valley aquifer system is from the coarse-grained deposits. The altitude of the pre-Quaternary bedrock surface in the Wood River Valley was compiled from about 1,000 well-driller reports for boreholes drilled to bedrock and about 70 Horizontal-to-Vertical Spectral Ratio (HVSR) ambient-noise measurements. The bedrock surface generally mimics the land surface by decreasing down tributary canyons and the main valley from north to south; it ranges from more than 6,700 feet in Baker Creek to less than 4,600 feet in the central Bellevue fan. Most of the south-central portion of the Bellevue fan is underlain by an apparent topographically closed area on the bedrock surface that appears to drain to the southwest towards Stanton Crossing. Quaternary sediment thickness ranges from less than a foot on main and tributary valley margins to about 350 feet in the central Bellevue fan. Hydraulic conductivity for 81 wells in the study area was estimated from well-performance tests reported on well-driller reports. Estimated hydraulic conductivity for 79 wells completed in alluvium ranges from 1,900 feet per day (ft/d) along Warm Springs Creek to less than 1 ft/d in upper Croy Canyon. A well completed in bedrock had an estimated hydraulic conductivity value of 10 ft/d, one well completed in basalt had a value of 50 ft/d, and three wells completed in the confined system had values ranging from 32 to 52 ft/d. Subsurface outflow of groundwater from the Wood River Valley aquifer system into the eastern Snake River Plain aquifer was estimated to be 4,000 acre-feet per year. Groundwater outflow beneath Stanton Crossing to the Camas Prairie was estimated to be 300 acre-feet per year.
Idaho↗