Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources
USGS2012

Tectonic relations of carbon dioxide discharges and earthquakes

CO 2 ‐rich springs occur worldwide along major zones of seismicity. They are mostly in young orogenic belts, but some are in areas of rifting continental platforms. Analyses of 13 C content indicate that much of the CO 2 is derived from the mantle and that other important sources are the metamorphism of marine carbonate‐bearing sedimentary rocks and the degradation of organic material. The presence of calc‐silicate minerals, such as pumpellyite in metagraywacke, is evidence of former conversion of carbonate‐bearing rocks into calc‐silicate minerals and release of CO 2 . The CO 2 pressure in fractured rocks of a fault zone reduces the effective normal stress and, if it is sufficiently great, allows the fault to slip. If the pressure were maintained at a sufficiently high level, the fault behavior might be characterized by frequent small earthquakes and aseismic creep such as occur along active segments of the San Andreas system. The presence of CO 2 ‐rich springs may indicate a potentially hazardous seismic region. Monitoring of CO 2 discharges could be useful in earthquake prediction.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Magnetic effects of maghemitization of oceanic crust

Both theoretical considerations and available experimental results indicate that magnetic effects of maghemitization are strongly dependent on the grain size of the originally unoxidized titanomagnetite. Maghemitization of single‐domain titanomagnetite results in a decrease in coercivity, an increase in susceptibility, and a large decrease in Q ratio. Maghemitization of multidomain titanomagnetite results in an increase in coercivity, a decrease in susceptibility, and no large changes in Q ratio. Single‐domain titanomagnetite is probably resistant to the development of a chemical remanent magnetization (CRM), whereas multidomain titanomagnetite can acquire a CRM during maghemitization. The behavior of pseudo‐single‐domain titanomagnetite, which is the main carrier of remanence in submarine extrusive rocks, is investigated by comparing the magnetic properties of the French‐American Mid‐Ocean Undersea Study (FAMOUS) (less than 0.1 m.y. old) and the Leg 37 (3.5 m.y. old) pillow basalts recovered from the Mid‐Atlantic Ridge near 37°N. Combining electron microprobe analyses, Curie temperature measurements, and cell edge determinations, we find that the FAMOUS rocks are already oxidized ( z = 0.38), possibly as a result of some high‐temperature maghemitization during cooling of the magma. Comparison with the more highly oxidized ( z = 0.7) Leg 37 pillow basalts indicates that low‐temperature maghemitization of such rocks does not result in appreciable changes of coercivity and susceptibility, although the Q ratio does decrease and CRM seems to be acquired. Such a CRM could account for the anomalously low magnetic inclinations observed at most of the Leg 37 sites.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Deep volcanic tremor and magma ascent mechanism under Kilauea, Hawaii

Deep harmonic tremor originating at depths around 40 km under Kilauea was studied using records accumulated since 1962 at the Hawaii Volcano Observatory of the U.S. Geological Survey. The deep source of the tremor was determined by onset times and confirmed by the relative amplitude across the island-wide network of seismometers. The period of tremor was conclusively shown to be determined by the source effect and not by the path or station site effect because the period would change considerably in time but maintained uniformity across the seismic net during the tremor episode. The tremor appeared to be primarily composed of P waves. We interpret the observed period and amplitude in terms of the stationary crack model of Aki et al. (1977) and find that the seismic moment rates for deep tremors are considerably larger than those for shallow-tremors suggesting more vigorous transport for the former. We propose a kinematic source model which may be more appropriate for deep tremor. According to this model, a measurable quantity called ‘reduced displacement’ is directly proportional to the rate of magma flow. A systematic search for deep tremor episodes was made for the period from 1962 through 1979, and the amplitude, period, and duration of the tremor were tabulated. We then constructed a cumulative reduced-displacement plot over the 18-year period. The result shows a generally steady process which does not seem to be significantly affected by major eruptions and large earthquakes near the surface. The total magma flow estimated from the reduced displacement is however, one order of magnitude smaller than that estimated by Swanson (1972). It may be that most channels transport magma aseismically, and only those with strong barriers generate tremor.

Hawaii↗
USGS2012

Geodetic measurement of crustal deformation on the San Andreas, Hayward, and Calaveras faults near San Francisco, California

Analysis of a geodetic network of 115 lines crossing the San Andreas, Hayward, and Calaveras faults in the vicinity of San Francisco Bay and measured repeatedly between 1970 and 1980 has revealed details about the accommodation of relative plate motion in this area. The most striking result is that the deformation is not uniformly distributed across the area. In the east bay, along the Hayward and Calaveras faults, all motion appears to take place as slip directly on the fault, with no accumulation of strain in the adjacent crust. On both the Calaveras and the Hayward faults the rate obtained for the 1970 to 1980 period agrees with geologic rates spanning a few million years and with creep rates spanning a few decades. The Hayward fault slip rate is 7 ± 1 mm/yr. The Calaveras fault slip rate is 7 ± 1 mm/yr, with perhaps half of this slip distributed across a zone a few kilometers wide, probably as inelastic deformation of weak near‐surface material. The absence of strain accumulation in the east bay is surprising since the Hayward and Calaveras faults have been the site of large earthquakes in the past. A block located east of the Calaveras fault and south of the Las Positas fault has been rotating clockwise at a rate of 0.3 ± 0.1 μrad/yr with very little internal deformation. Along the San Francisco peninsula no detectable slip occurs (less than 1.5 mm/yr) at the surface, but appreciable strain is accumulating. Near fault shear strain rates are 0.6 ± 0.1 μstrain/yr (engineering) with direction N47°W ± 9. The slip rate near the San Andreas fault is 12.2 ± 3.9 mm/yr distributed across a broad zone. The relative motion across the whole region during the period 1970–1980 is 32.1 ± 7.4 mm/yr.

California↗
USGS2012

Application of wave field continuation to the inversion of refraction data

Three examples of the inversion of refraction data by downward continuation illustrate the applicability of the method to field data. The first example is a refraction profile from the Mojave Desert, California. These data are spatially aliased and contain clear evidence of lateral inhomogeneity. The inversion in this case produces a broken image in the slowness‐depth domain due to the lateral inhomogeneity, but a useful average velocity model is still obtained. The second example is a shallow marine reflection profile. Here, the truncation effects due to the finite horizontal aperture of the recording cable produce artifacts in the slowness‐depth domain. The velocity model is, however, distinct from these artifacts, and the presence of strong precritical reflections aids in the inversion. The third example is another shallow marine reflection profile. The inversion of these data illustrate the utilization of constraints provided by multiples as well as primary arrivals.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

The Yellowstone-Snake River Plain seismic profiling experiment: Crustal structure of the Eastern Snake River Plain

Seismic refraction profiles recorded along the eastern Snake River Plain (ESRP) in southeastern Idaho during the 1978 Yellowstone-Snake River Plain cooperative seismic profiling experiment are interpreted to infer the crustal velocity and attenuation (Q-1) structure of the ESRP. Travel-time and synthetic seismogram modeling of a 250 km reversed refraction profile as well as a 100 km detailed profile indicate that the crust of the ESRP is highly anomalous. Approximately 3 to 6 km of volcanic rocks (with some interbedded sediments) overlie an upper-crustal layer (compressional velocity ≅6.1 km/s) which thins southwestward along the ESRP from a thickness of 10 km near Island Park Caldera to 2 to 3 km beneath the central and southwestern portions of the ESRP. An intermediate-velocity (≅6.5 km/s) layer extends from ≅10 to ≅20 km depth. A thick (≅22 km) lower crust of compressional velocity 6.8 km/s, a total crustal thickness of ≅42 km, and a P n velocity of ≅7.9 km/s is observed in the ESRP, similar to the western Snake River Plain and the Rocky Mountains Provinces. High attenuation is evident on the amplitude corrected seismic data due to low-Q values in the volcanic rocks (Q p = 20 to 200) and throughout the crust (Q p = 160 to 300). Based on these characteristics of the crustal structure and volcanic-age progression data, it is suggested that the ESRP has resulted from an intensive period of intrusion of mantle-derived basaltic magma into the upper crust generating explosive silicic volcanism and associated regional uplift and caldera collapse. This activity began about 15 m.y. ago in southwestern Idaho and has migrated northeast to its present position at Yellowstone. Subsequent cooling of the intruded upper crust results in the 6.5 km/s velocity intermediate layer. Crustal subsidence and periodic basaltic volcanism as represented by the ESRP complete the sequence of crustal evolution.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Terranes and suture zones in east central Alaska

East central Alaska, with its 17 terranes, forms a part of the mosaic of allochthonous terranes that join the North American and Siberian plates. These terranes range from continental and continental margin, such as the Tatonduk with its thick well-bedded succession of marine shelf rocks, to seamount, arc, and ocean floor terranes. The Yukon crystalline terrane, the largest described here, is a composite of at least four subterranes juxtaposed across the Tintina fault with the Tatonduk terrane, a northwestern extension of the North American plate in Alaska. Inboard of the Yukon crystalline terrane are packets of closely appressed microterranes separated from the Tatonduk and other terranes belonging to North America by major suture zones. These microterranes lie between North America and the mosaic of accretionary terranes that form the more southerly part of Alaska. The most obviously allochthonous microterranes within the suture zones are the Woodchopper Canyon, an Early Devonian basaltic seamount, and the White Mountains, an Ordovician volcanic arc terrane capped by Silurian and Devonian carbonate bank deposits. The nearest counterpart of these terranes is the Alexander terrane in southeastern Alaska. The Tintina fault of Mesozoic and Cenozoic age, like the Denali fault, primarily follows old suture zones that separate terranes. Strike slip faulting developed after collision in places where further convergence was oblique to the terrane margins. Where terranes met head-on, their leading edges lie along a multiple set of high-angle faults that outline microterranes in accretion zones.

Alaska↗
USGS2012

Post 12 m.y. rotation of southwest Washington

Paleomagnetic field directions from the basalt of Pack Sack Lookout are compared to those from the Pomona Member of the Saddle Mountains Basalt of the Columbia River Basalt Group. The Pomona crops out over a wide region on the Columbia Plateau east of the Cascade Range, and the basalt of Pack Sack Lookout crops out well to the west of the Cascades about 30 to 60 km east of the Washington coast. Our paleomagnetic results support existing geologic and geochemical evidence that both these units are part of a single 12‐m.y.‐old flow that erupted in western Idaho and flowed to the Washington coast. The magnetic data further indicate that southwest Washington has undergone clockwise rotation with respect to the Columbia Plateau and stable North America. The data suggest that both a large‐scale regional rotation of ∼16° and locally complex small‐scale rotations exist, the two being present to different degrees in the eastern and western regions of southwest Washington. The Cascade Range appears to coincide with the tectonic boundary, separating rotated and unrotated regions of Washington state. Rotation of southwest Washington appears to have been associated with the rotation of large pieces of western Oregon and southern Washington, possibly as a result of either a ridge‐push force from the Basin and Range province or shear along the Pacific‐North America plate boundary.

Washington↗
USGS2012

Source parameters of the 1980 Mammoth Lakes, California, earthquake sequence

From the more than 1500 Mammoth Lakes earthquakes recorded on three-component digital seismographs (Spudich et al., 1981), 150 were used in an analysis of the locations, mechanism, and source parameters. A composite fault plane solution of nine earthquakes 3.9 ≤ M ≤ 5.1 defines a right-lateral strike slip mechanism on a steeply dipping nearly east-west plane striking S75°E or left-lateral strike slip on a nearly north-south plane striking N10°E. Vertical cross sections of well-located aftershocks indicate possibly three east-west planes that coincide with the locations of the four largest earthquakes with M L ≥ 6.0. Using the spectral analysis of S waves (Brune, 1970), source parameters for 67 earthquakes were determined. Forty-eight had magnitudes greater than or equal to 3.0. Seismic moments ranged from 9.20×10 18 dyn cm to 2.33×10 24 dyn cm. Earthquakes with seismic moment greater than about 1.0×10 21 dyn cm had nearly constant stress drops (≃ 50 bars); earthquakes with seismic moment less than about 1.0×10 21 dyn cm had stress drops that apparently decrease as seismic moment decreases.

California↗
USGS2012

Uranium-lead isotopic ages from the Sierra Nevada Batholith, California

This study provides new information on the timing and distribution of Mesozoic magmatic events in the Sierra Nevada batholithic complex chiefly between 36° and 37°N. latitude. U-Pb ages have been determined for 133 zircon and 7 sphene separates from 82 samples of granitoid rocks. Granitoid rocks in this area range in age from 217 to 80 m.y. Triassic intrusions are restricted to the east side of the batholith; Jurassic plutons occur south of the Triassic plutons east of the Sierra Nevada, as isolated masses within the Cretaceous batholith, and in the western foothills of the range; Cretaceous plutons form a continuous belt along the axis of the batholith and occur as isolated masses east of the Sierra Nevada. No granitic intrusions were emplaced for 37 m.y. east of the Sierra Nevada following the end of Jurassic plutonism. However, following emplacement of the eastern Jurassic granitoids, regional extension produced a fracture system at least 350 km long into which the dominantly mafic, calc-alkalic Independence dike swarm was intruded 148 m.y. ago. The dike fractures probably represents a period of regional crustal extension caused by a redistribution of the regional stress pattern accompanying the Nevadan orogeny. Intrusion of Cretaceous granitic plutons began in large volume about 120 m.y. ago in the western Sierra Nevada and migrated steadily eastward for 40 m.y. at a rate of 2.7 mm/y. This slow and constant migration indicates remarkably uniform conditions of subduction with perhaps downward migration of parent magma generation or a slight flattening of the subduction zone. Such steady conditions could be necessary for the production of large batholithic complexes such as the Sierra Nevada. The abrupt termination of plutonism 80 m.y. ago may have resulted from an increased rate of convergence of the American and eastern Pacific plates and dramatic flattening of the subduction zone. U-Pb ages of the Giant Forest-alaskite sequence in Sequoia National Park are all in the range 99±3 m.y., indicating a relatively short period of emplacement and cooling for this nested group of plutons. U-Pb ages of a mafic inclusion and its host granodiorite indicate that both were derived from a common source or that the mafic inclusion was totally equilibrated with the granodioritic magma. Comparison of isotopic ages determined by different methods such as zircon U-Pb, sphene U-Pb, hornblende K-Ar, and biotite K-Ar suggests that zircon U-Pb ages generally approximate the emplacement age of a pluton. However, some plutons probably contain inherited or entrained old zircons, and the zircons of some samples are disturbed by younger thermal and metamorphic events. The ages reported here are consistent with U-Pb age determinations previously made on granitic rocks to the north [Stern et al., 1981], The age distribution of granitic belts determined here is in general agreement with those established by K-Ar dating [Evernden and Kistler, 1970] but does not differentiate the five epochs of plutonism determined in their study.

California↗
USGS2012

Northern East Pacific Rise: Magnetic anomaly and bathymetric framework

The oceanic crust in the eastern Pacific between 7°N and 30°N and east of 127°W contains a fairly complete history of the spreading centers associated with the East Pacific Rise since 25 m.y. B.P. (late Oligocene). In this paper, we have summarized the seafloor spreading magnetic-anomaly data and the bathymetric data that reflect the record of this tectonic history. The well-defined magnetic lineations north of the Clarion fracture zone, in the mouth of the Gulf of California, and on the east flank of the East Pacific Rise (EPR) are carefully examined and used to provide a guide for interpreting the spreading pattern between the Clarion and Clipperton fracture zones, southward of the Rivera fracture zone over the Mathematician Ridge, and over the entire EPR east of the Mathematician Ridge between the Rivera and Siqueiros fracture zones. The bathymetric data provide a trace of the fracture zone pattern in each of the above mentioned areas. The fracture zone bathymetry and the seafloor spreading magnetic lineations on the EPR south of the Rivera fracture zone have a distinctive fanning pattern caused by close poles of rotation and plate boundary reorganizations. All these data provide a good record of the plate reorganizations in the middle Miocene at magnetic anomaly 5 A time (12.5 to 11 m.y. B.P.), in the late Miocene at magnetic anomaly 3′−4 time (6.5 m.y. B.P.), and in the Pliocene at magnetic anomaly 2′−3 time (3.5 m.y. B.P.). Several abandoned spreading centers, including the Mathematician Ridge, were left behind as a result of these reorganizations. The Mathematician Ridge is shown to be a set of ridges and trough whose origin is related to the tectonic activity associated with each of the above mentioned reorganizations since anomaly 5A.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

The sea slope problem revisited

Discrepancies in sea surface topography based on comparisons between the results of steric leveling and repeated geodetic levelings have identified what is known as the ‘sea slope problem.’ This problem is actually twofold: (1) the sea surface relief based on steric leveling differs significantly from that based on geodetic leveling along several generally north-south coasts, and (2) successively propagated levelings between several widely separated tide stations indicate that the stationary sea slope seemingly has been changing with time, whereas differenced sea level means between these stations indicate that the sea surface relief has remained virtually invariant during the same intervals. Reexamination of the three reported discrepancies between geodetically and sterically determined sea slopes indicates that the Australian example is based on leveling of a quality inappropriate to the comparison. The discrepancy developed along the Atlantic coast of the United States is limited to the reach between Portsmouth–Hampton Roads, Virginia, and Key West, Florida, where the accuracy of steric leveling may be especially vulnerable owing to the dynamic effects of the Gulf Stream. Reconsideration of the example along the Pacific coast of the United States indicates that the various discrepancies are due chiefly to intrasurvey movement and resultant distortion of geodetically defined height differences between tide stations. Agreement between the results of steric and geodetic leveling along tectonically inactive north-south coasts devoid of strong boundary currents is generally good. This observation supports the conclusions (1) that any directionally dependent systematic error in geodetic leveling is measurably insignificant and (2) that where allowance is made for the possible effects of major boundary currents or intrasurvey movement during levelings between tide stations, the sea slope problem tends to vanish.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Wandering terranes in southern Alaska: The Aleutia Microplate and implications for the Bering Sea

Paleomagnetic and geological data suggest that much of southern Alaska is a collage of tectonostratigraphic terranes which originated in Mesozoic time at paleolatitudes far south of their present position. The time of ‘docking’ of the terranes against cratonic Alaska is critical to defining their amalgamated size and extent during their northward motion as well as their role in the evolution of the Bering Sea. One of the largest of the tectonostratigraphic terranes, the Peninsular terrane of south central and southwestern Alaska, extends offshore along the outer Bering Sea continental margin (Beringia). Paleomagnetic data suggest that this terrane has moved northward through all of Cenozoic time, but geologic data imply that the terrane had accreted to Alaska by the end of the Mesozoic. In early Cenozoic time the eastern part of the Aleutian arc appears to have been superimposed on the Peninsular terrane, and postulated northward Cenozoic motion of the terrane would therefore have required northward motion of the arc. Two accretion models, based on docking times for terranes in Alaska, are proposed, and they illustrate that large areas of the abyssal Bering Sea, the Alaska Peninsula, the Aleutian arc, and the Beringian continental margin may be part of a superterrane or microplate called Aleutia (microplate as defined by Beck et al. (1980), i.e., a microplate is a displaced segment of lithosphere that has crustal roots, whereas a superterrane is an amalgamation of terranes which may or may not be rootless). Model A implies that the Aleutian arc developed in situ on the southern edge of Aleutia after the microplate had docked. In model B, the final docking time of the Peninsular terrane is late Cenozoic, which implies that the Aleutia microplate encompasses a mammoth area that includes parts of southern Alaska, the Alaska Peninsula, the southern Beringian margin, the abyssal Bering Sea (Kula plate), and the Aleutian arc. If model A is correct, the docking time of the Peninsular terrane is late Mesozoic or earliest Tertiary. The Aleutia microplate in this model is made up solely of the abyssal Bering Sea (Kula plate), which presumably docked at the same time or slightly after the Peninsular terrane accreted against Alaska. If model B is correct, that is, if the Aleutia collided with nuclear Alaska during the Cenozoic, then a late Cenozoic suture zone, the vestige of a large open sea that must have closed between Aleutia and Alaska, must exist in south central and southwest Alaska. Either evidence for Cenozoic closure and suturing has been obliterated in Alaska or the inferences of Cenozoic terrane motion derived from paleomagnetic data are suspect.

Alaska↗
USGS2012

Earthquakes in the Orozco transform zone: seismicity, source mechanisms, and tectonics

As part of the Rivera Ocean Seismic Experiment, a network of ocean bottom seismometers and hydrophones was deployed in order to determine the seismic characteristics of the Orozco transform fault in the central eastern Pacific. We present hypocentral locations and source mechanisms for 70 earthquakes recorded by this network. All epicenters are within the transform region of the Orozco Fracture Zone and clearly delineate the active plate boundary. About half of the epicenters define a narrow line of activity parallel to the spreading direction and situated along a deep topographic trough that forms the northern boundary of the transform zone (region 1). Most focal depths for these events are very shallow, within 4 km of the seafloor; several well-determined focal depths, however, are as great as 7 km. No shallowing of seismic activity is observed as the rise-transform intersection is approached; to the contrary, the deepest events are within 10 km of the intersection. First motion polarities for most of the earthquakes in region 1 are compatible with right-lateral strike slip faulting along a nearly vertical plane, striking parallel to the spreading direction. Another zone of activity is observed in the central part of the transform (region 2). The apparent horizontal and vertical distribution of activity in this region is more scattered than in the first, and the first motion radiation patterns of these events do not appear to be compatible with any known fault mechanism. Pronounced lateral variations in crustal velocity structure are indicated for the transform region from refraction data and measurements of wave propagation directions. The effect of this lateral heterogeneity on hypocenters and fault plane solutions is evaluated by tracing rays through a three-dimensional velocity grid. While findings for events in region 1 are not significantly affected, in region 2, epicentral mislocations of up to 10 km and azimuthal deflections of up to 45° may result from assuming a laterally homogeneous velocity structure. When corrected for the effects of lateral heterogeneity, the epicenters and fault plane solutions for earthquakes in region 2 are compatible with predominantly normal faulting along a topographic trough trending NW–SE; the focal depths, however, are poorly constrained. These results suggest an en echelon spreading center or leaky transform regime in the central transform region.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Precision of geodolite surveys: A reply to Jackson and Cheng

Jackson and Cheng have suggested that the changes in areal dilatation measured in Geodolite surveys by the U.S. Geological Survey may be simply an artifact of the measuring system. Although systematic error could conceivably account for the observed excursions in dilatation, we maintain that the specific criticisms by Jackson and Cheng are incorrect: the excursions in dilatation cannot be attributed to the offset correction nor to proportional error associated with temperature. The absence of both errors is demonstrated by using data that are particularly sensitive to the two effects.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Experimental deformation of polycrystalline H2O ice at high pressure and low temperature: Preliminary results

Interest in the mechanical properties of water ice under the conditions in which it exists in the outer solar system has motivated the development and use of a new high‐pressure, low‐temperature triaxial deformation apparatus. Constant displacement rate tests on 70 samples of pure polycrystalline water ice have been performed at temperatures 77≤≤258 K, confining pressures 0.1≤≤350 MPa, and strain rates 3.5×10≤ ≤3.5×10 s. In most cases, the ice polymorph tested was ice . Both brittle and ductile behavior have been observed. Brittle behavior of ice, promoted by lower pressure, lower temperature, and higher strain rate, is analogous to that in rocks, with the important exception that brittle fracture strength becomes independent of confining pressure above 50 MPa pressure and the fracture angle is approximately 45° to the loading direction (i.e., the coefficient of internal friction is approximately zero). Ductile flow, the predominant behavior in our tests at ≥195 K, follows a law of form = σ exp (−*/) (σ is stress; is the gas constant; , * are material constants). Three sets of material constants are required to fit the data, with changes in sets (or mechanisms) occurring near 243 K and 195 K. The value of remains near 4 throughout the measured ductile field, but * drops from 91 to 61 to 31 /mole as temperature decreases. The maximum brittle strength measured was 171 MPa; the maximum ductile strength measured was 91 MPa. At confining pressures near the phase transition pressure of ice → ice II, the ductile strength is observed to drop dramatically. Some overlap with previous work occurs at higher temperatures and lower pressures. Agreement with present work is generally good, both quantitatively in the values of and *, and qualitatively in the mechanism of deformation. Although the ductile strengths measured here are somewhat higher than expected on the basis of extrapolations of previous work, the low value of * at <195 K indicates that the ice layer on icy bodies in the solar system is much weaker than has generally been predicted.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

A seismic refraction survey of the Imperial Valley Region, California

The U.S. Geological Survey conducted an extensive seismic refraction survey in the Imperial Valley region of California in 1979. The Imperial Valley is located in the Salton Trough, an active rift between the Pacific and North American plates. Forty shots fired at seven shot points were recorded by 100 portable seismic instruments at typical spacing of 0.5–1 km. More than 1300 recording locations were occupied, and more than 3000 usable seismograms were obtained. We analyzed five profiles using a standard ray‐tracing program, constructed a contour map of reduced travel times from our most widely recorded shot point, and modeled an existing gravity profile across the Salton Trough. Results are itemized: (1) All models have in common a sedimentary layer ( V p = 1.8–5.0 km/s), a “transition zone” ( V p = 5.0–5.65 km/s), a basement ( V p = 5.65 km/s in the Imperial Valley, 5.9 km/s on the bordering mesas), and subbasement ( V p = 7.2 km/s). (2) The sedimentary layer ranges in thickness along the axis of the Salton Trough from 3.7 km (Salton Sea) to 4.8 km (U.S.‐Mexican border). On the bordering mesas it is quite variable in thickness. (3) The “transition” zone is about 1 km thick in most places. In the Imperial Valley there are no marked velocity discontinuities in this zone between the sedimentary layer and basement. On the bordering mesas, however, there is a discontinuity at the top of this zone. (4) There are apparently two types of basement. On the bordering mesas, basement is crystalline igneous and metamorphic rocks. In the Imperial Valley, basement is mostly lower‐greenshist‐facies sedimentary rocks, based primarily on the smooth transition in character from sediment to basement arrivals, the low value of basement velocity, and the fact that deep (4 km) wells in the valley penetrate only the upper part of the known Cenozoic stratigraphic column for the Salton Trough. (5) The subbasement, or intermediate crustal layer, ranges in depth along the axis of the Salton Trough from 16 km (Salton Sea) to 10 km (U.S.‐Mexican border). Gravity modeling requires that this layer deepen and/or pinch out beneath the bordering mesas and mountain ranges. Based on its high velocity and the presence of intrusive basaltic rocks in the sedimentary section in the Imperial Valley, the subbasement is thought to be a mafic intrusive complex similar to oceanic middle crust. (6) Several structures are seen that affect basement, transition zone, and deeper parts of the sedimentary layer. They include a scarp along the Imperial fault, as much as 1 km down to the northeast, and a scarp passing roughly along the topographic boundary between the Imperial Valley and the bordering mesa to the west, as much as 3½ km down to the east. We interpret the latter scarp to be the suture, or rift boundary, between the older crystalline basement on the mesa and the younger metasedimentary basement in the Imperial Valley. (7) On a contour map of reduced travel time from our most widely recorded shot point, subtle patches of early arrivals among otherwise late arrivals in the central Imperial Valley correlate well with known geothermal resource areas having reservoir temperatures of more than 150°C. Apparently the Salton Trough is a location where new crust is being generated. As the rift opens, mafic intrusive rocks fill it from below as sedimentary rocks fill it from above. Rifting and intrusion produce high heat flow that metamorphoses the sedimentary rocks to shallow depth (metasedimentary basement in the Imperial Valley) and thus consolidates the new crust.

California↗
USGS2012

Regional deformation near Palmdale, California, 1973-1983 (USA)

The Tehachapi trilateration network spans the intersection of the San Andreas and Garlock faults in southern California in the “Big Bend” region of the San Andreas fault. Analysis of data from 1973–1983 shows strain differences between the northwest and southeast regions of the network and slip at depth on both faults. The Palmdale network, spanning the San Andreas fault entirely within the Tehachapi network, showed increases of about 1 μstrain in both east‐west and north‐south extension in late 1979. The Tehachapi strains also jumped at this time, but the magnitude of the increase was only about one third that of Palmdale. The principal strain rates for Tehachapi over the time interval 1973–1983 are μstrain/yr and μstrain/yr, with the 1 axis directed N76°E. Strains were also computed for two subregions. The principal strain rates for the southeast Tehachapi region are μstrain/yr and μStrain/yr, with the 1 axis directed N73°E. This result differs significantly from the principal strain rates at Palmdale ( μstrain/yr, μstrain/yr, with the 1 axis directed N71°E). For the northwest Tehachapi region, μstrain/yr and μstrain/yr, with the 1 axis directed N93°E.

California↗