Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources

Results of the application of seismic-reflection and electromagnetic techniques for near-surface hydrogeologic and environmental investigations at Fort Bragg, North Carolina

As part of the U.S. Geological Survey's Resource Conservation and Recovery Act, Facilities Investigations at Fort Bragg, North Carolina, selected geophysical techniques were evaluated for their usefulness as assessment tools for determining subsurface geology, delineating the areal extent of potentially contaminated landfill sites, and locating buried objects and debris of potential environmental concern. Two shallow seismic-reflection techniques (compression and shear wave) and two electromagnetic techniques (ground-penetrating radar and terrain conductivity) were evaluated at several sites at the U.S. Army Base. The electromagnetic techniques also were tested for tolerance to cultural noise, such as nearby fences, vehicles, and power lines. For the terrain conductivity tests, two instruments were used--the EM31 and EM34, which have variable depths of exploration. The shallowest reflection event was 70 feet below land surface observed in common-depth point, stacked compression-wave data from 24- and 12-fold shallow-seismic-reflection surveys. Several reflection events consistent with clay-sand interfaces between 70 and 120 feet below land surface, along with basement-saprolite surfaces, were imaged in the 24-fold, common- depth-point stacked data. 12-fold, common-depth-point stacked data set contained considerably more noise than the 24-fold, common-depth-point data, due to reduced shot-to-receiver redundancy. Coherent stacked reflection events were not observed in the 24-fold, common-depth-point stacked shear-wave data because of the partial decoupling of the shear- wave generator from the ground. At one site, ground-penetrating radar effectively delineated a shallow, 2- to 5-foot thick sand unit bounded by thin (less than 1 foot) clay layers. The radar signal was completely attenuated where the overlying and underlying clay units thickened and the sand unit thinned. The pene- tration depth of the radar signal was less than 10 feet below land surface. A slight increase in electromagnetic conductivity across shallow sampling EM31 and EM34 profiles provided corroborative evidence of the shallow, thickening clay units. Plots of raw EM31 and EM34 data provided no direct interpretable information to delineate sand and clay units in the shallow subsurface. At two sites, the ground-penetrating radar effectively delineated the lateral continuity of surficial sand units 5 to 25 feet in thickness and the tops of their underlying clay units. The effective exploration depth of the ground-penetrating radar was limited by the proximity of clay units to the subsurface and their thickness. The ground-penetrating radar delineated the areal extent and depth of cover at a previously unrecognized extension of a trench-like landfill underlying a vehicle salvage yard. Attenuation of the radar signal beneath the landfill cover and the adjacent subsurface clays made these two mediums indistinguishable by ground-penetrating radar; however, EM31 data indicated that the electrical conductivity of the landfill was higher than the subsurface material adjacent to the landfill. The EM31 and EM34 conductivity surveys defined the areal extent of a landfill whose boundaries were inaccurately mapped, and also identified the locations of an old dumpsite and waste incinerator site at another landfill. A follow-up ground-penetrating radar survey of the abandoned dumpsite showed incongruities in some of the shallow radar reflections interpreted as buried refuse dispersed throughout the landfill. The ground-penetrating radar and EM31 effectively delineated a shallow buried fuel-oil tank. Of the three electromagnetic instruments, the ground-penetrating radar with the shielded 100-megahertz antenna was the least affected by cultural noise followed, in order, by the EM31 and EM34. The combination of terrain- conductivity and ground-penetrating radar for the site assessment of the landfill provided a powerful means to identify the areal extent of the landfill, potenti

Water-Resources Investigations Report↗

The relationship of geophysical measurements to engineering and construction parameters in the Straight Creek Tunnel pilot bore, Colorado

Seismic-refraction and electrical-resistivity measurements made along the walls of the Straight Creek Tunnel pilot bore indicate that both a low-velocity and a high-resistivity layer exist in the disturbed rock surrounding the excavation. Seismic measurements were analyzed to obtain the thickness and seismic velocity of rock in the low-velocity layer, the velocity of rock behind the layer and the amplitude of seismic energy received at the detectors. Electrical-resistivity measurements were analyzed to obtain the thickness and electrical resistivity of the high-resistivity layer and the resistivity of rock behind the layer. The electrical resistivity and the seismic velocity of rock at depth, the thickness of rock in the low-velocity layer, and the relative amplitude of seismic energy were correlated against the following parameters, all of which are important in tunnel construction: height of the tension arch, stable vertical rock load, rock quality, rate of construction and cost per foot, percentage of lagging and blocking, set spacing, and type and amount of steel support required, The correlations were statistically meaningful, having correlation coefficients ranging in absolute value from about 0·7 to nearly 1·0. This finding suggests the possibility of predicting parameters of interest in tunnel construction from geophysical measurements made in feeler holes drilled ahead of a working face. Predictions might be based on correlations established either during the early stages of construction or from geophysical surveys in other tunnels of similar design in similar geologic environments.

Colorado↗

The Alaska Mineral Resource Assessment Program: Background information to accompany geologic and mineral-resource maps of the Cordova and Middleton Island quadrangles, southern Alaska

This report summarizes recent results of integrated geological, geochemical, and geophysical field and laboratory studies conducted by the U.S. Geological Survey in the Cordova and Middleton Island 1°x3° quadrangles of coastal southern Alaska. Published open-file reports and maps accompanied by descriptive and interpretative texts, tables, diagrams, and pertinent references provide background information for a mineral-resource assessment of the two quadrangles. Mines in the Cordova and Middleton Island quadrangles produced copper and byproduct gold and silver in the first three decades of the 20th century. The quadrangles may contain potentially significant undiscovered resources of precious and base metals (gold, silver, copper, zinc, and lead) in veins and massive sulfide deposits hosted by Cretaceous and Paleogene sedimentary and volcanic rocks. Resources of manganese also may be present in the Paleogene rocks; uranium resources may be present in Eocene granitic rocks; and placer gold may be present in beach sands near the mouth of the Copper River, in alluvial sands within the canyons of the Copper River, and in smaller alluvial deposits underlain by rocks of the Valdez Group. Significant coal resources are present in the Bering River area, but difficult access and structural complexities have discouraged development. Investigation of numerous oil and gas seeps near Katalla in the eastern part of the area led to the discovery of a small, shallow field from which oil was produced between 1902 and 1933. The field has been inactive since, and subsequent exploration and drilling onshore near Katalla in the 1960's and offshore near Middleton Island on the outer continental shelf in the 1970's and 1980's was not successful.

Alaska↗

The Alaska Mineral Resource Assessment Program: Background information to accompany geologic and mineral-resource maps of the Killik River 1°x3° quadrangle, northern Alaska

This report summarizes results of integrated geological, geochemical, and geophysical field and laboratory studies conducted by the U.S. Geological Survey in the Killik River 1°x3° quadrangle, Brooks Range, northern Alaska. These studies were designed to provide an assessment of the mineral resources of the quadrangle. The geological and geochemical data were the primary sources of information used to assess the mineral-resource potential of the quadrangle. The presence of permissive host rocks and favorable geochemical signatures in stream- and lake-sediment and (or) heavy-mineral-concentrate samples were used to infer the potential for undiscovered resources of minerals in deposits of different types. The Killik River quadrangle may contain undiscovered resources of preciousand base-metals (principally lead, silver, and zinc) in veins and breccias hosted by Devonian and Mississippian clastic sedimentary rocks or in stratiform massive sulfide deposits hosted primarily by Mississippian and Pennsylvanian sedimentary rocks. Resources of barium, phosphate, and manganese may be present in Mississippian to Jurassic sedimentary rocks. Cretaceous fluvial sedimentary rocks in the northern part of the quadrangle are permissive hosts for uranium deposits, as well as for placer deposits of heavy minerals such as gold and chromite; however, geochemical data suggest that the potential for deposits of this type is low. Numerous coal beds are present in the Cretaceous rocks throughout the northern part of the quadrangle, but the limited thickness and lateral extent of most of the beds reduce their resource potential. Although the southern third of the quadrangle has no potential for petroleum resources, there is potential in the northern two-thirds.

Alaska↗

Archive of digital Boomer seismic reflection data collected during USGS Cruise 94CCT02, south-central South Carolina coastal region, August 1994

In August of 1994, the U.S. Geological Survey, in cooperation with Coastal Carolina University, conducted marine geophysical surveys in numerous water bodies adjacent to the south-central South Carolina coastal region. Data were collected aboard the MS Coastal in the Ashley, North Edisto, Wadmalaw, Dawho, South Edisto, and Ashepoo Rivers; the Wappoo, North, Steamboat, Bohicket, and Toogoodoo Creeks; Charleston Harbor; Wadmalaw Sound; Fenwick Cut; and the Atlantic Ocean from offshore Isle of Palms to Kiawah Island. This report serves as an archive of unprocessed digital boomer seismic reflection data, trackline maps, navigation files, GIS information, observers' logbooks, Field Activity Collection System (FACS) logs, and FGDC metadata. Filtered and gained digital images of the seismic profiles are also provided. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry and others, 1975) and may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU). Example SU processing scripts and USGS software for viewing the SEG-Y files (Zihlman, 1992) are also provided.

Data Series↗

MRNIDX - Marine Data Index: Database Description, Operation, Retrieval, and Display

A database referencing the location and content of data stored on magnetic medium was designed to assist in the indexing of time-series and spatially dependent marine geophysical data collected or processed by the U. S. Geological Survey. The database was designed and created for input to the Geologic Retrieval and Synopsis Program (GRASP) to allow selective retrievals of information pertaining to location of data, data format, cruise, geographical bounds and collection dates of data. This information is then used to locate the stored data for administrative purposes or further processing. Database utilization is divided into three distinct operations. The first is the inventorying of the data and the updating of the database, the second is the retrieval of information from the database, and the third is the graphic display of the geographical boundaries to which the retrieved information pertains.

Open-File Report↗

Alaska digital aeromagnetic database description

Northwest Geophysical Associates, Inc. (NGA) was contracted by the U.S. Geological Survey (USGS) to construct a database containing original aeromagnotic data (in digital form) from surveys, maps and grids for the State of Alaska from existing public-domain magnetic data. This database facilitates thedetailed study and interpretation of aeromagnetic data along flightline profiles and allows construction of custom grids for selected regions of Alaska. The database is linked to and reflect? the work from the statewide gridded compilation completed under a prior contract. The statewide gridded compilation is also described in Saltus and Simmons (1997) and in Saltus and others (1999). The database area generally covers the on-shore portion of the State of Alaska and the northern Gulf of Alaska excluding the Aleutian Islands. The area extends from 54'N to 72'N latitude and 129'W to 169'W longitude. The database includes the 85 surveys that were included in the previous statewide gridded compilation. Figure (1) shows the extents of the 85 individual data sets included in the statewide grids. NGA subcontracted a significant portion of the work described in this report to Paterson, Grant, and Watson Limited (PGW). Prior work by PGW (described in Meyer and Saltus, 1995 and Meyer and others, 1998) for the interior portion of Alrska (INTAK) is included in this present study. The previous PGW project compiled 25 of the 85 surveys included in the statewide grids. PGW also contributed 10 additional data sets that were not included in either of the prior contracts or the statewide grids. These additional data sets are included in the current project in the interest of making the database as complete as possible. Figure (2) shows the location of the additional data sets.

Alaska↗

Base of principal aquifer for parts of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

Water resources in the North and South Platte River valleys of Nebraska, including the valley of Lodgepole Creek, are critical to the social and economic health of the area, and for the recovery of threatened and endangered species in the Platte River Basin. Groundwater and surface water are heavily used resources, and uses are regulated in the study area. Irrigation is the dominant water use and, in most instances, is supplied by both groundwater and surface-water sources. The U.S. Geological Survey and its partners have collaborated to use airborne geophysical surveys for areas of the North and South Platte River valleys including the valley of Lodgepole Creek in western Nebraska. The objective of the surveys was to map the aquifers and underlying bedrock topography of selected areas to help improve the understanding of groundwater–surface-water relations to guide water-management decisions. This project was a cooperative study involving the North Platte Natural Resources District, the South Platte Natural Resources District, the Twin Platte Natural Resources District, the Conservation and Survey Division of the University of Nebraska-Lincoln, and the Nebraska Environmental Trust. This report presents the interpreted base-of-aquifer surface for part of the area consisting of the North Platte Natural Resources District, the South Platte Natural Resources District, and the Twin Platte Natural Resources District. The interpretations presented herein build on work done by previous researchers from 2008 to 2009 by incorporating additional airborne electromagnetic survey data collected in 2010 and additional test holes from separate, related studies. To make the airborne electromagnetic data useful, numerical inversion was used to convert the measured data into a depth-dependent subsurface resistivity model. An interpretation of the elevation and configuration of the base of aquifer was completed in a geographic information system that provided x, y, and z coordinates. The process of interpretation involved manually picking locations (base-of-aquifer elevations) on the displayed airborne electromagnetic-derived resistivity profile by the project geophysicist, hydrologist, and geologist. These locations, or picks, of the base-of-aquifer elevation (typically the top of the Brule Formation of the White River Group) were then stored in a georeferenced database. The pick was made by comparing the inverted airborne electromagnetic-derived resistivity profile to the lithologic descriptions and borehole geophysical logs from nearby test holes. The database of interpretive picks of the base-of-aquifer elevation was used to create primary input for interpolating the new base-of-aquifer contours. The automatically generated contours were manually adjusted based on the interpreted location of paleovalleys eroded into the base-of-aquifer surface and associated bedrock highs, many of which were unmapped before this study. When contours are overlain by the water-table surface, the saturated thickness of the aquifer can be computed, which allows an estimate of total water in storage. The contours of the base-of-aquifer surface presented in this report may be used as the lower boundary layer in existing and future groundwater-flow models. The integration of geophysical data into the contouring process facilitated a more continuous and spatially comprehensive view of the hydrogeologic framework.

Nebraska↗

High-resolution airborne geophysical survey of the Shellmound, Mississippi area

In late February to early March 2018, the U.S. Geological Survey acquired 2,364 line-kilometers (km) of airborne electromagnetic, magnetic, and radiometric data in the Shellmound, Mississippi study area. The purpose of this survey is to contribute high-resolution information about subsurface geologic structure to inform groundwater models, water resource infrastructure studies, and local decision making. The Shellmound region hosts a managed aquifer recharge (MAR) pilot project, developed by the Agricultural Research Service of the U.S. Department of Agriculture. The MAR pilot project is investigating the use of bank filtration along the Tallahatchie River as a source for recharge in areas of significant groundwater decline. Direct injection into the Mississippi River Valley Alluvial aquifer (MRVA) occurs about 3 km from the extraction gallery. Understanding the structure of the aquifer, including both shallow and deep confining units, is important for the success of this pilot MAR study and may be even more important for potential future large-scale MAR projects and groundwater model development efforts.

Mississippi↗

Field-trip guide to the geologic highlights of Newberry Volcano, Oregon

Newberry Volcano and its surrounding lavas cover about 3,000 square kilometers (km 2 ) in central Oregon. This massive, shield-shaped, composite volcano is located in the rear of the Cascades Volcanic Arc, ~60 km east of the Cascade Range crest. The volcano overlaps the northwestern corner of the Basin and Range tectonic province, known locally as the High Lava Plains, and is strongly influenced by the east-west extensional environment. Lava compositions range from basalt to rhyolite. Eruptions began about half a million years ago and built a broad composite edifice that has generated more than one caldera collapse event. At the center of the volcano is the 6- by 8-km caldera, created ~75,000 years ago when a major explosive eruption of compositionally zoned tephra led to caldera collapse, leaving the massive shield shape visible today. The volcano hosts Newberry National Volcanic Monument, which encompasses the caldera and much of the northwest rift zone where mafic eruptions occurred about 7,000 years ago. These young lava flows erupted after the volcano was mantled by the informally named Mazama ash, a blanket of volcanic ash generated by the eruption that created Crater Lake about 7,700 years ago. This field trip guide takes the visitor to a variety of easily accessible geologic sites in Newberry National Volcanic Monument, including the youngest and most spectacular lava flows. The selected sites offer an overview of the geologic story of Newberry Volcano and feature a broad range of lava compositions. Newberry ’ s most recent eruption took place about 1,300 years ago in the center of the caldera and produced tephra and lava of rhyolitic composition. A significant mafic eruptive event occurred about 7,000 years ago along the northwest rift zone. This event produced lavas ranging in composition from basalt to andesite, which erupted over a distance of 35 km from south of the caldera to Lava Butte where erupted lava flowed west to temporarily block the Deschutes River. Because of Newberry Volcano ’ s proximity to populated areas, the presence of hot springs within the caldera, and the long and recent history of eruptive activity (including explosive activity), the U.S. Geological Survey installed monitoring equipment on the volcano. A recent geophysical study indicates the presence of magma at 3 to 5 km beneath the caldera. The writing of this guide was prompted by a field trip to Crater Lake and Newberry Volcano organized in conjunction with the August 2017 IAVCEI quadrennial meeting in Portland, Oregon. Both field trip guides are available online. These two volcanoes were grouped in a single field trip because they are two of the few Cascades volcanoes that have generated calderas and significant related tephra deposits.

Oregon↗

A summary of geologic hazards for proposed OCS oil and gas lease sale 68, southern California

A geophysical survey, consisting of about 6,880 line-km of multisensor, high-resolution, seismic reflection data, was run in 161 of the 221 tracts tentatively selected by the U.S. Department of the Interior for inclusion in the southern California Outer Continental Shelf Oil and Gas Lease Sale 68. Geologic hazards identified in the study area for which stipulations are recommended are active faults, mass transport, steep slopes (>10?), and steep-walled submarine canyons. Geologic hazards whose effects can be mitigated through existing technology and design and are not considered cause for stipulation are shallow faults, buried and filled channels, shallow gas, gas-charged sediments, hydrocarbon seeps, and unstable fan deposits. The Minerals Management Service has recommended that a stipulation be applied to 83 tracts where there is evidence of existing or potential sea-floor instability over a significant portion of the tract. Further data acquisition and analysis on a more detail-ed grid will be required of lessees or operators before drilling will be permitted on leases issued as a result of the sale.

Open-File Report↗

Geophysical and sampling data from the inner continental shelf: Northern Cape Cod Bay, Massachusetts

The U.S. Geological Survey (USGS) and the Massachusetts Office of Coastal Zone Management (CZM) have cooperated to map approximately 480 km2 of the inner continental shelf in northern Cape Cod Bay, MA. This report contains geophysical and sampling data collected by the USGS during five research cruises between 2006 and 2008. The geophysical data include (1) swath bathymetry from interferometric sonar, (2) acoustic backscatter from interferometric and sidescan sonars, and (3) subsurface stratigraphy and structure from seismic-reflection profilers. The seafloor sampling data include sediment samples, photographs, and video tracklines. These spatial data support research on the influence that sea-level change and sediment supply have on coastal evolution and help identify the type, distribution, and quality of subtidal marine habitats within the coastal zone of Massachusetts.

Open-File Report↗

Maps showing distribution of the Middle Cretaceous unconformity in the eastern Gulf of Mexico

Several theories on the origin of the Gulf of Mexico basin have been introduced by various researchers (Beloussov, 1970; Freeland and Dietz, 1971; Malfait and Dinkelman, 1972; Wood and Walper, 1974; Pilger, 1978; Buffler and others, 1980; Dickinson and Coney, 1980; Gose and others, 1980; Schmidt-Effing, 1980; Walper, 1980; Schlager and others, 1984). Although no final agreement has been reached, one prominent geologic feature is generally recognized. The early evolution of the basin ended with a major middle Cretaceous event resulting in a Gulf-wide unconformity referred to as the middle Cretaceous unconformity (MCU). This event represents a major shift from Early Cretaceous shallow-water bank sedimentation to Late Cretaceous deeper water carbonates (Worzel and others, 1973; Mitchum, 1978). Seismic data collected by the U.S. Geological Survey and the University of Texas Marine Science Institute, Galveston Geophysics Laboratory (UTMSI-GGL) were used to map the MCU and its relationship to the deep stratigraphy and structure of the eastern Gulf basin east of long 90° W. In addition, data from the Deep Sea Drilling Project (DSDP) in the southeastern Gulf and along the Campeche Escarpment and dredge samples collected by Schlager and others (1984) from the Florida Escarpment provide an age for the MCU (Cenomanian, 97 m. y. ) and a detailed lithological record. This report emphasizes the salt diapirs, pillows, and ridges in the northeastern Gulf of Mexico because of the profound effect these geologic structures have on the MCU. Salt locations are shown on the isopach of post-MCU sediments (fig. 1). A second map shows pre-middle Cretaceous outcrops terminated by the MCU along the Florida Escarpment, the southeastern Gulf, and the Campeche Escarpment (fig. 2).

Miscellaneous Field Studies Map↗

Airborne electromagnetic and magnetic geophysical survey data of the Yukon Flats and Fort Wainwright areas, central Alaska, June 2010

In June 2010, the U.S. Geological Survey conducted airborne electromagnetic and magnetic surveys of the Yukon Flats and Fort Wainwright study areas in central Alaska. These data were collected to estimate the three-dimensional distribution of permafrost at the time of the survey. These data were also collected to evaluate the effectiveness of these geophysical methods at mapping permafrost geometry and to better define the physical properties of the subsurface in discontinuous permafrost areas. This report releases digital data associated with these surveys. Inverted resistivity depth sections are also provided in this data release, and data processing and inversion methods are discussed.

Open-File Report↗

Geophysical logging and thermal imaging near the Hemphill Road TCE National Priorities List Superfund site near Gastonia, North Carolina

Borehole geophysical logs and thermal imaging data were collected by the U.S. Geological Survey near the Hemphill Road TCE (trichloroethylene) National Priorities List Superfund site near Gastonia, North Carolina, during August 2014 through February 2015. In an effort to assist the U.S. Environmental Protection Agency in the development of a conceptual groundwater model for the assessment of current contaminant distribution and future migration of contaminants, surface geological mapping and borehole geophysical log and thermal imaging data collection, which included the delineation of more than 600 subsurface features (primarily fracture orientations), was completed in five open borehole wells and two private supply bedrock wells. In addition, areas of possible groundwater discharge within a nearby creek downgradient of the study site were determined based on temperature differences between the stream and bank seepage using thermal imagery.

North Carolina↗

Preliminary ground and airborne-based geophysical mapping and modelling of an active hydrothermal system at Mammoth Lakes, California

Mammoth Lakes, California hosts a productive hydrothermal system within the seismically active south moat of Long Valley Caldera. Surficial evidence of the shallow hydrothermal system includes discrete zones of tree-kill dispersed between Shady Rest Park and the Casa Diablo Geothermal Power Plant (40 MW), as well as east of the power plant. The tree-kill areas are associated with elevated diffuse CO₂ emissions, heated ground, hydrothermal alteration, diffuse soil H₂S emissions, and gas vents. Previous mapping delineates prominent north and northwest trending structures within the south moat along the southwestern edge of the resurgent dome that may accommodate gas and fluid flow at the Shady Rest Park and Basalt Canyon Tree Kill Areas (SRTKA and BCTKA, respectively). Both tree-kill areas are also located along contacts between resurgent rhyolite, mafic lavas, and surficial deposits which may provide additional pathways for gas and fluid migration in the shallow subsurface. Characterizing structure and lithology using geophysical anomalies is critical to determining primary structural controls on the hydrothermal system and the extent of subsurface alteration at these sites. We conducted ground and airborne-based potential field geophysical surveys to map gravity and magnetic anomalies. These anomalies are then used to model subsurface geology, structure, and hydrothermal alteration. Here we present our preliminary geophysical mapping and modelling results at both tree-kill locations. Gravity and magnetic data suggest complex structural intersections are coincident with heated ground and gas emissions at the SRTKA and BCTKA. Hydrothermal systems are often observed or interpreted to exploit fault intersections which can serve as highly permeable pathways for hydrothermal fluid and gas discharge, enabling economic geothermal energy production. Geophysical mapping and modelling are an effective means of investigating such structural complexity at Mammoth Lakes due to the presence of unidentified and concealed structures.

California↗

Characterization of subsurface stratigraphy along the lower American River floodplain using electrical resistivity, Sacramento, California, 2011

In July 2011, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, completed a geophysical survey using electrical resistivity along an approximately 6-mile reach of the lower American River in Sacramento, California, to map near-surface lithological variations. This survey is a part of a manifold and comprehensive study of river-flow dynamics and geologic boundary-property knowledge necessary to estimate scour potential and levee erosion risk. Data were acquired on the left (south or west) bank between river mile 5 and 10.7 as well as a short section on the right bank from river mile 5.4 to 6. Thirteen direct-current resistivity profiles and approximately 8.3 miles of capacitively coupled resisistivity data were acquired along accessible areas of the floodplain between the levee and river bank. Capacitively coupled resistivity was used as a reconnaissance tool, because it allowed for greater spatial coverage of data but with lower resolution and depth of investigation than the DC resistivity method. The study area contains Pleistocene-age alluvial deposits, dominated by gravels, sands, silts, and clays, that vary in both lateral extent and depth. Several generations of lithologic logs were used to help interpret resistivity variations observed in the resistivity models.

California↗

The recovery of ground‐water levels in Nebraska in 1935

A program of water‐level measurements in about 350 wells scattered throughout Nebraska was begun in 1934 by the United States Geological Survey in cooperation with the Conservation and Survey Division of the University of Nebraska (see L. K. Wenzel, A state‐wide program of periodic measurements of ground‐water level in Nebraska, Trans. Amer. Geophys. Union, 16th annual meeting, pp. 495–498, 1935). Included in this program were about 60 wells in the Platte River Valley on which periodic measurements were started in 1930. Observations on the 350 wells were continued in 1935 at about monthly intervals and the measurements collected are now being prepared for publication as a paper of the Nebraska Geological Survey.

Eos, Transactions, American Geophysical Union↗