Search USGS⌕ Search

SEARCH · Search USGS

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41Linked to original sources

Green River oil shale—concept of origin extended: An interdisciplinary problem being attacked from both ends

A much fuller understanding of the Green River oil shale and its organic chemistry will emerge when the geologists, paleontologists, organic chemists, biologists, paleolimnologists, and biogeochemists, who are now working on it, integrate their findings with those of the others. We know from the geology, paleontology, and paleolimnology that the biologic progenitors of the organic substance in the Green River oil shale could only have been microscopic algae, and other micro-organisms, that grew and accumulated in the central parts of large, shallow lakes that existed under a subtropical climate. The only nonlacustrine organic components were wind-blown, or water borne, pollens and waxy spores. These, however, made up a large and important part of the organic-rich sediment. The geology of the Green River Formation shows that as the algal and pollen-rich sediment was buried deeper and deeper, progressively more of its pore water and dissolved constituents were expressed. Static pressures may have reached as much as 210 kg cm −2 , and the ambient temperature rose, with depth, to somewhere within the range between 90° and 125° C. Beneath the ancient lakes a tectonically quiescent environment persisted for tens of millions of years after their organic sediments had been deeply buried. The organic material of the Green River oil shale can be divided into three fractions—a small bitumen fraction that is extractable with common organic solvents, a major fraction called koerogen that consists of insoluble pyrobitumens, and a somewhat smaller inert fraction that is neither soluble nor does it yield oil on pyrolysis. As all three fractions originated in the same algal, pollen-rich sediment, an explanation for their marked differences must be sought in their geochemical history or from a study of the modern analogues of their progenitors. The components of the bitumen fraction consisted of “biological markers” that were inherited from the Eocene plants and animals in which they originally formed. Diagenesis has changed these hydrogen-rich compounds, but not enough to obscure their provenance. Kerogen presumably became insoluble because its hydrogen-rich components polymerized. My speculation is that the inert fraction was derived from a polyphenolic substance produced in the original algal ooze by “non-enzymatic browning.” Only three Classes of non-marine algae need be considered as progenitors of the Green River oil shale; the Xanthophyceae, the Chlorophyceae, and the Cyanophyceae. Only the Cyanophyceae (the blue-green algae) meet the biologic and paleontologic requirements to have served as the dominant precursors of the Green River oil shale. Several other oil shales clearly were derived from the Xanthophyceae, specifically Botryococcus. The blue-green algal ooze now forming, and accumulating, in Mud Lake, Florida, has been studied biologically and chemically as a possible present-day analogue of the Green River oil shale precursor. In this small lake we have established the fact that a bacterial inhibitor is produced, which inhibits decay of the algae and thereby permits the accumulation of energy-rich organic compounds. We infer that a similar indigenous inhibitor must have acted in the Eocene lakes to permit them to become the huge energy sinks they were. Studies of the organic chemistry of living blue-green algae show that they contain appreciable percentages of fatty acids, hydrocarbons, and very large percentages of proteins. These promising, energy-rich compounds could serve as source materials for potential conversion into oil shale in the geologic future. Certain marine anaerobic bacteria convert fatty acids into aliphatic hydrocarbons. Fresh-water obligate anaerobes should be investigated to see if they also convert fatty acids into hydrocarbons. The part played by aquatic animals that live in, or on, freshwater algal ooze in synthesizing hydrocarbons has not been investigated, but deserves attention. Pollen grains, of course, must be considered an important precursor of hydrocarbons produced on pyrolysis. They contain far higher percentages of long chain hydrocarbons and alcohols than most plant materials. The major problem ahead is to account for the progressive hydrogenation and subsequent polymerization of the relatively oxygen-rich constituents of algae such as the polysaccharides, amino acids, ammo sugars, and fatty acids into the insoluble pyrobitumens that constitute, particularly, the kerogen fraction of the Green River oil shale.

Wyoming↗

Satellite image atlas of glaciers of the world

U.S. Geological Survey Professional Paper 1386, Satellite Image Atlas of Glaciers of the World, contains 11 chapters designated by the letters A through K. Chapter A provides a comprehensive, yet concise, review of the "State of the Earth's Cryosphere at the Beginning of the 21st Century: Glaciers, Global Snow Cover, Floating Ice, and Permafrost and Periglacial Environments," and a "Map/Poster of the Earth's Dynamic Cryosphere," and a set of eight "Supplemental Cryosphere Notes" about the Earth's Dynamic Cryosphere and the Earth System. The next 10 chapters, B through K, are arranged geographically and present glaciological information from Landsat and other sources of historic and modern data on each of the geographic areas. Chapter B covers Antarctica; Chapter C, Greenland; Chapter D, Iceland; Chapter E, Continental Europe (except for the European part of the former Soviet Union), including the Alps, the Pyrenees, Norway, Sweden, Svalbard (Norway), and Jan Mayen (Norway); Chapter F, Asia, including the European part of the former Soviet Union, China, Afghanistan, Pakistan, India, Nepal, and Bhutan; Chapter G, Turkey, Iran, and Africa; Chapter H, Irian Jaya (Indonesia) and New Zealand; Chapter I, South America; Chapter J, North America (excluding Alaska); and Chapter K, Alaska. Chapters A–D each include map plates.

Professional Paper↗

Geologic map of the Puye Quadrangle, Los Alamos, Rio Arriba, Sandoval, and Santa Fe Counties, New Mexico

The Puye quadrangle covers an area on the eastern flank of the Jemez Mountains, north of Los Alamos and west of Espanola, New Mexico. Most of the quadrangle consists of a dissected plateau that was formed on the resistant caprock of the Bandelier Tuff, which was erupted from the Valles caldera approximately 1 to 2 million years ago. Within the canyons of the east-flowing streams that eroded this volcanic tableland, Miocene and Pliocene fluvial deposits of the Puye Formation and Santa Fe Group are exposed beneath the Bandelier Tuff. These older units preserve sand and gravel that were deposited by streams and debris flows flowing from source areas located mostly north and northeast of the Puye quadrangle. The landscape of the southeastern part of the quadrangle is dominated by the valley of the modern Rio Grande, and by remnants of piedmont-slope and river-terrace deposits that formed during various stages of incision of the Rio Grande drainage on the landscape. Landslide deposits are common along the steep canyon walls where broad tracts of the massive caprock units have slumped toward the canyons on zones of weakness in underlying strata, particularly on silt/clay-rich lacustrine beds within the Puye Formation.

Miscellaneous Field Studies Map↗

The Universal Transverse Mercator (UTM) grid

The most convenient way to identify points on the curved surface of the Earth is with a system of reference lines called parallels of latitude and meridians of longitude. On some maps, the meridians and parallels appear as straight lines. On most modern maps, however, the meridians and parallels appear as curved lines. These differences sre due to the mathematical treatment required to portray a curved surface on a flat surface so that important properties of the map (such as distance and areal accuracy) are shown with minimum distortion. The system used to portray a portion of the round Earth on a flat surface is called a map projection.

Fact Sheet↗

A shifting rift—Geophysical insights into the evolution of Rio Grande rift margins and the Embudo transfer zone near Taos, New Mexico

We present a detailed example of how a subbasin develops adjacent to a transfer zone in the Rio Grande rift. The Embudo transfer zone in the Rio Grande rift is considered one of the classic examples and has been used as the inspiration for several theoretical models. Despite this attention, the history of its development into a major rift structure is poorly known along its northern extent near Taos, New Mexico. Geologic evidence for all but its young rift history is concealed under Quaternary cover. We focus on understanding the pre-Quaternary evidence that is in the subsurface by integrating diverse pieces of geologic and geophysical information. As a result, we present a substantively new understanding of the tectonic configuration and evolution of the northern extent of the Embudo fault and its adjacent subbasin. We integrate geophysical, borehole, and geologic information to interpret the subsurface configuration of the rift margins formed by the Embudo and Sangre de Cristo faults and the geometry of the subbasin within the Taos embayment. Key features interpreted include (1) an imperfect D-shaped subbasin that slopes to the east and southeast, with the deepest point ∼2 km below the valley floor located northwest of Taos at ∼36° 26′N latitude and 105° 37′W longitude; (2) a concealed Embudo fault system that extends as much as 7 km wider than is mapped at the surface, wherein fault strands disrupt or truncate flows of Pliocene Servilleta Basalt and step down into the subbasin with a minimum of 1.8 km of vertical displacement; and (3) a similar, wider than expected (5–7 km) zone of stepped, west-down normal faults associated with the Sangre de Cristo range front fault. From the geophysical interpretations and subsurface models, we infer relations between faulting and flows of Pliocene Servilleta Basalt and older, buried basaltic rocks that, combined with geologic mapping, suggest a revised rift history involving shifts in the locus of fault activity as the Taos subbasin developed. We speculate that faults related to north-striking grabens at the end of Laramide time formed the first west-down master faults. The Embudo fault may have initiated in early Miocene southwest of the Taos region. Normal-oblique slip on these early fault strands likely transitioned in space and time to dominantly left-lateral slip as the Embudo fault propagated to the northeast. During and shortly after eruption of Servilleta Basalt, proto-Embudo fault strands were active along and parallel to the modern, NE-aligned Rio Pueblo de Taos, ∼4–7 km basinward of the modern, mapped Embudo fault zone. Faults along the northeastern subbasin margin had northwest strikes for most of the period of subbasin formation and were located ∼5–7 km basinward of the modern Sangre de Cristo fault. The locus of fault activity shifted to more northerly striking faults within 2 km of the modern range front sometime after Servilleta volcanism had ceased. The northerly faults may have linked with the northeasterly proto-Embudo faults at this time, concurrent with the development of N-striking Los Cordovas normal faults within the interior of the subbasin. By middle Pleistocene(?) time, the Los Cordovas faults had become inactive, and the linked Embudo–Sangre de Cristo fault system migrated to the south, to the modern range front.

New Mexico↗

Stable isotope evidence for an atmospheric origin of desert nitrate deposits in northern Chile and southern California, U.S.A.

Natural surficial accumulations of nitrate-rich salts in the Atacama Desert, northern Chile, and in the Death Valley region of the Mojave Desert, southern California, are well known, but despite many geologic and geochemical studies, the origins of the nitrates have remained controversial. N and O isotopes in nitrate, and S isotopes in coexisting soluble sulfate, were measured to determine if some proposed N sources could be supported or rejected, and to determine if the isotopic signature of these natural deposits could be used to distinguish them from various types of anthropogenic nitrate contamination that might be found in desert groundwaters. High-grade calich-a-type nitrate deposits from both localities have δ 15 N values that range from −5 to +5‰, but are mostly near 0‰. Values of δ 15 N near 0‰ are consistent with either bulk atmospheric N deposition or microbial N fixation as major sources of the N in the deposits. δ 18 O values of those desert nitrates with δ 15 N near 0‰ range from about +31 to +50‰ (V-SMOW), significantly higher than that of atmospheric O 2 (+23.5‰). Such high values of δ 18 O are considered unlikely to result entirely from nitrification of reduced N, but rather resemble those of modern atmospheric nitrate in precipitation from some other localities. Assuming that limited modern atmospheric isotope data are applicable to the deposits, and allowing for nitrification of co-deposited ammonium, it is estimated that the fraction of the nitrate in the deposits that could be, accounted for isotopically by atmospheric N deposition may be at least 20% and possibly as much as 100%. δ 34 S values are less diagnostic but could also be consistent with atmospheric components in some of the soluble sulfates associated with the deposits. The stable isotope data support the hypothesis that some high-grade caliche-type nitrate-rich salt deposits in some of the Earth's hyperarid deserts represent long-term accumulations of atmospheric deposition (possibly in the order of 104 yr for the Death Valley region, 10 7 yr for the Atacama Desert) in the relative absence of soil leaching or biologic cycling. The combined N and O isotope signature of the nitrate in these deposits is significantly different from those of many other natural and anthropogenic sources of nitrate.

Chemical Geology↗

Geologic framework of the 2005 Keathley Canyon gas hydrate research well, northern Gulf of Mexico

The Keathley Canyon sites drilled in 2005 by the Chevron Joint Industry Project are located along the southeastern edge of an intraslope minibasin (Casey basin) in the northern Gulf of Mexico at 1335 m water depth. Around the drill sites, a grid of 2D high-resolution multichannel seismic data designed to image depths down to at least 1000 m sub-bottom reveals 7 unconformities and disconformities that, with the seafloor, bound 7 identifiable seismic stratigraphic units. A major disconformity in the middle of the units stands out for its angular baselapping geometry. From these data, three episodes of sedimentary deposition and deformation are inferred. The oldest episode consists of fine-grained muds deposited during a period of relative stability in the basin (units e, f, and g). Both the BSR and inferred gas hydrate occur within these older units. The gas hydrate occurs in near-vertical fractures. A second episode (units c and d) involved large vertical displacements associated with infilling and ponding of sediment. This second interval corresponds to deposition of intercalated fine and coarse-grained material that was recovered in the drill hole that penetrated the thin edges of the regionally much thicker units. The final episode of deposition (units a and b) occurred during more subdued vertical motions. Hemipelagic drape (unit a) characterizes the modern seafloor. The present-day Casey basin is mostly filled. Its sill is part of a subsiding graben structure that is only 10-20 m shallower than the deepest point in the basin, indicating that gravity-driven transport would mostly bypass the basin. Contemporary faulting along the basin margins has selectively reactivated an older group of faults. The intercalated sand and mud deposits of units c and d are tentatively correlated with Late Pleistocene deposition derived from the western shelf-edge delta/depocenter of the Mississippi River, which was probably most active from 320 ka to 70 ka [Winker, C.D., Booth, J., 2000. Sedimentary dynamics of the salt-dominated continental slope, Gulf of Mexico: integration of observations from the seafloor, near-surface, and deep subsurface. In: Proceedings of the GCSSEPM Foundation 20th Annual Research Conference, Deep-water Reservoirs of the World, pp. 1059-1086]. The presence of sand within the gas hydrate stability zone (in units c and d) is not sufficient to concentrate gas hydrate even though dispersed gas hydrate occurs deeper in the fractured mud/clay-rich sections of units e and f.

Gulf of Mexico↗

Earthquake intensity distributions: a new view

Pioneering work by Nicolas Ambraseys and many collaborators demonstrates both the tremendous value of macroseismic data and the perils of its uncritical assessment. In numerous publications he shows that neglect of original sources and/or failure to appreciate the context of historical accounts, as well as use of unreliable indicators such as landslid- ing to determine intensities, commonly leads to inflated magnitude estimates for historical earthquakes. The U.S. Geological Survey “Did You Feel It?” (DYFI) system, which now collects and systematically interprets thousands of first-hand reports from felt earthquakes, provides the opportunity to explore further the biases associated with traditional intensity distributions determined from written (media or archival) accounts. I briefly summarize and further develop the results of Hough (2013), who shows that traditional intensity distrib- utions imply more dramatic damage patterns than are documented by more spatially rich DYFI data, even when intensities are assigned according to the conservative practices estab- lished by Ambraseys’ work. I further consider the separate intensity–attenuation relations that have been developed to characterize intensities for historical and modern earthquakes in California, using traditionally assigned intensities and DYFI intensities, respectively. The results support the conclusion that traditionally assigned intensity values tend to be inflated by a fundamental bias towards reporting of dramatic rather than representative effects. I introduce an empirical correction-factor approach to correct for these biases. This allows the growing wealth of well-calibrated DYFI data to be used as calibration events in the analysis of historical earthquakes

Bulletin of Earthquake Engineering↗

The Universal Transverse Mercator (UTM) grid

The most convenient way to identify points on the curved surface of the Earth is with a system of reference lines called parallels of latitude and meridians of longitude. On some maps the meridians and parallels appear as straight lines. On most modern maps, however, the meridians and parallels may appear as curved lines. These differences are due to the mathematical treatment required to portray a curved surface on a flat surface so that important properties of the map (such as distance and areal accuracy) are shown with minimum distortion. The system used to portray a portion of the round Earth on a flat surface is called a map projection.

Fact Sheet↗

Rates and patterns of late Cenozoic denudation in the northernmost Atlantic Coastal Plain and Piedmont

Topography of a 2800 km2 section of the U.S. Atlantic Coastal Plain and Piedmont is reconstructed at five times from the late Miocene to the Holocene. The reconstructions are based on mapping of fluvial, colluvial, and marginal-marine deposits that are dated by radiocarbon, palynostratigraphy, and correlation to adjacent glacial and marine units. Denudation rates and patterns are calculated by subtracting successive topographies, with 60 m horizontal resolution and 6 m vertical resolution. The overall late Miocene to Holocene denudation rate of 10 m/m.y. is similar to other estimates of long-term denudation in the region. The overall rate resolves spatially into a wide range of local rates, varying from a minimum of ???0.2 m/m.y. on residual uplands to as high as 600 m/m.y. in glacially rerouted stream channels. The distribution of local rates shows that denudation is accomplished by stream incision in response to long-term glacio-eustatic decline, followed by slope retreat into residual uplands from the incised channels. Slope retreat replaces the uplands with pediments and straths. Pediment landforms and sediments, and observation of modern scarps and valley heads, indicate that groundwater seepage from the base of residual uplands is an important mechanism of slope retreat. This process is self-limiting because as the volume of residual upland is reduced, seepage diminishes and slope retreat slows until small residuals undergo little or no further reduction. Thus, relict topography is preserved even as most of the landscape actively erodes.

Geological Society of America Bulletin↗

On the provenance of field reports of the 1886 Charleston, South Carolina, earthquake: A seismo-historical whodunnit

Much of what is known about the effects of the 1886 Charleston, South Carolina, earthquake throughout the epicentral region can be attributed to meticulous field investigations by an individual with training in geology and engineering, Earle Sloan ( Clendenin, 1926 ). In a recent study, Bilham and Hough (2024) undertook a detailed analysis of the effects of the earthquake on railroads in the Charleston region, drawing heavily from Sloan’s reports. This exercise identified several inconsistencies in Sloan’s field reports, including understandable measurement imprecision, inferred data entry mistakes, and transcription errors. The study also begged the question, where was Sloan at the time of the mainshock and over the following week? And to what extent did he draw from secondhand information in compiling his reports? On this question Sloan’s reports were sometimes enigmatic, lending themselves to misinterpretation in contemporaneous as well as modern interpretations. Beyond the details that were germane for, and briefly summarized by, the studies of Bilham and Hough (2023 , 2024) , in this report we don our historical seismologist caps to chronicle Sloan’s activities following the earthquake. We summarize our inferences here for the benefit of future scholars who might attempt to retrace either Sloan’s footsteps or our own. This study also serves to highlight Sloan’s singular contributions to earthquake science, which were never published separately.

South Carolina↗

Marine benthic habitat mapping of Muir Inlet, Glacier Bay National Park and Preserve, Alaska, with an evaluation of the Coastal and Marine Ecological Classification Standard III

Seafloor geology and potential benthic habitats were mapped in Muir Inlet, Glacier Bay National Park and Preserve, Alaska, using multibeam sonar, ground-truth information, and geological interpretations. Muir Inlet is a recently deglaciated fjord that is under the influence of glacial and paraglacial marine processes. High glacially derived sediment and meltwater fluxes, slope instabilities, and variable bathymetry result in a highly dynamic estuarine environment and benthic ecosystem. We characterize the fjord seafloor and potential benthic habitats using the Coastal and Marine Ecological Classification Standard (CMECS) recently developed by the National Oceanic and Atmospheric Administration (NOAA) and NatureServe. Substrates within Muir Inlet are dominated by mud, derived from the high glacial debris flux. Water-column characteristics are derived from a combination of conductivity temperature depth (CTD) measurements and circulation-model results. We also present modern glaciomarine sediment accumulation data from quantitative differential bathymetry. These data show Muir Inlet is divided into two contrasting environments: a dynamic upper fjord and a relatively static lower fjord. The accompanying maps represent the first publicly available high-resolution bathymetric surveys of Muir Inlet. The results of these analyses serve as a test of the CMECS and as a baseline for continued mapping and correlations among seafloor substrate, benthic habitats, and glaciomarine processes.

Scientific Investigations Map↗

Crustal structure and quaternary acceleration of deformation rates in central Washington revealed by stream profile inversion, potential field geophysics, and structural geology of the Yakima folds

Post‐Miocene tectonic uplift along fault‐cored anticlines within central Washington produced the Yakima Fold Province, a region of active NNE‐SSW shortening in the Cascadian backarc. The relative timing and rate of deformation along individual structures is coarsely defined yet imperative for seismic hazard assessment. In this work, we use geomorphic and geophysical mapping, stream profile inversion, and balanced cross‐section methods to constrain fault geometries and slip rates in the Yakima Canyon region. We extract stream profiles from LiDAR data and analytically solve for the rate of relative rock uplift along several active fault‐cored anticlines. To constrain the fault geometries at depth and the long‐term magnitude of deformation, we constructed two line‐balanced cross sections across the folds with forward‐modeled magnetic and gravity anomaly data. Our stream profile results indicate an increase of incision rates in the Pleistocene, and we infer the increase is tectonically controlled. We estimate modern slip rates between 0.4 and 0.6 mm/year accommodated on reverse faults that core the Manastash Ridge, Umtanum Ridge, and Selah Butte anticlines and establish that these faults reactivate and invert older normal faults in basement rocks. Finally, we calculate the time required to accumulate sufficient strain energy for a large magnitude earthquake (M ≥ 7) along individual structures in the Yakima Fold Province. Results show that the Yakima folds likely accommodate large magnitude earthquakes and that it takes several hundred to several thousand years to accumulate sufficient strain energy for an M ≥ 7 earthquake.

Washington↗

Late pleistocene aggradation and degradation of the lower colorado river: Perspectives from the Cottonwood area and other reconnaissance below Boulder Canyon

Where the lower Colorado River traverses the Basin and Range Province below the Grand Canyon, significant late Pleistocene aggradation and subsequent degrada tion of the river are indicated by luminescence, paleomagnetic, and U-series data and stratigraphy. Aggradational, finely bedded reddish mud, clay, and silt are underlain and overlain by cross-bedded to plane-bedded fine sand and silt. That sequence is commonly disconformably overlain by up to 15 m of coarse sand, rounded exotic gravel, and angular, locally derived gravel. Luminescence dates on the fine sediments range from ca. 40 ka to 70 ka, considering collective uncertainties. A section of fine grained sediments over a vertical range of 15 m shows normal polarity magnetization and little apparent secular variation beyond dispersion that can be explained by com paction. Aggradation on large local tributaries such as Las Vegas Wash appears to have been coeval with that of the Colorado River. The upper limits of erosional rem nants of the sequence define a steeper grade above the historical river, and these late Pleistocene deposits are greater than 100 m above the modern river north of 35??N. Ter race gravels inset below the upper limit of the aggradational sequence yield 230Th dates that range from ca. 32 ka to 60 ka and indicate that degradation of the river system in this area closely followed aggradation. The thick sequence of rhythmically bedded mud and silt possibly indicates set tings that were ponded laterally between valley slopes and levees of the aggrading river. Potential driving mechanisms for such aggradation and degradation include sediment-yield response to climate change, drought, fire, vegetation-ecosystem dynam ics, glaciation, paleofloods, groundwater discharge, and building and destruction of natural dams produced by volcanism and landslides. ?? 2008 The Geological Society of America.

Conference Paper↗

3D ground‐motion simulations of Mw 7 earthquakes on the Salt Lake City segment of the Wasatch fault zone: Variability of long‐period (T≥1 s) ground motions and sensitivity to kinematic rupture parameters

We examine the variability of long‐period ( T ≥1 s) earthquake ground motions from 3D simulations of M w 7 earthquakes on the Salt Lake City segment of the Wasatch fault zone, Utah, from a set of 96 rupture models with varying slip distributions, rupture speeds, slip velocities, and hypocenter locations. Earthquake ruptures were prescribed on a 3D fault representation that satisfies geologic constraints and maintained distinct strands for the Warm Springs and for the East Bench and Cottonwood faults. Response spectral accelerations (SA; 1.5–10 s; 5% damping) were measured, and average distance scaling was well fit by a simple functional form that depends on the near‐source intensity level SA 0 ( T ) and a corner distance R c :SA( R , T )=SA 0 ( T )(1+( R / R c )) −1 . Period‐dependent hanging‐wall effects manifested and increased the ground motions by factors of about 2–3, though the effects appeared partially attributable to differences in shallow site response for sites on the hanging wall and footwall of the fault. Comparisons with modern ground‐motion prediction equations (GMPEs) found that the simulated ground motions were generally consistent, except within deep sedimentary basins, where simulated ground motions were greatly underpredicted. Ground‐motion variability exhibited strong lateral variations and, at some sites, exceeded the ground‐motion variability indicated by GMPEs. The effects on the ground motions of changing the values of the five kinematic rupture parameters can largely be explained by three predominant factors: distance to high‐slip subevents, dynamic stress drop, and changes in the contributions from directivity. These results emphasize the need for further characterization of the underlying distributions and covariances of the kinematic rupture parameters used in 3D ground‐motion simulations employed in probabilistic seismic‐hazard analyses.

Utah↗

Multi-elemental analysis of aqueous geochemical samples by quadrupole inductively coupled plasma-mass spectrometry (ICP-MS)

Typically, quadrupole inductively coupled plasma-mass spectrometry (ICP-MS) is used to determine as many as 57 major, minor, and trace elements in aqueous geochemical samples, including natural surface water and groundwater, acid mine drainage water, and extracts or leachates from geological samples. The sample solution is aspirated into the inductively coupled plasma (ICP) which is an electrodeless discharge of ionized argon gas at a temperature of approximately 6,000 degrees Celsius. The elements in the sample solution are subsequently volatilized, atomized, and ionized by the ICP. The ions generated are then focused and introduced into a quadrupole mass filter which only allows one mass to reach the detector at a given moment in time. As the settings of the mass analyzer change, subsequent masses are allowed to impact the detector. Although the typical quadrupole ICP-MS system is a sequential scanning instrument (determining each mass separately), the scan speed of modern instruments is on the order of several thousand masses per second. Consequently, typical total sample analysis times of 2–3 minutes are readily achievable for up to 57 elements.

Open-File Report↗

Geology and geomorphology of Bear Lake Valley and upper Bear River, Utah and Idaho

Bear Lake, on the Idaho-Utah border, lies in a fault-bounded valley through which the Bear River flows en route to the Great Salt Lake. Surficial deposits in the Bear Lake drainage basin provide a geologic context for interpretation of cores from Bear Lake deposits. In addition to groundwater discharge, Bear Lake received water and sediment from its own small drainage basin and sometimes from the Bear River and its glaciated headwaters. The lake basin interacts with the river in complex ways that are modulated by climatically induced lake-level changes, by the distribution of active Quaternary faults, and by the migration of the river across its fluvial fan north of the present lake. The upper Bear River flows northward for ???150 km from its headwaters in the northwestern Uinta Mountains, generally following the strike of regional Laramide and late Cenozoic structures. These structures likely also control the flow paths of groundwater that feeds Bear Lake, and groundwater-fed streams are the largest source of water when the lake is isolated from the Bear River. The present configuration of the Bear River with respect to Bear Lake Valley may not have been established until the late Pliocene. The absence of Uinta Range-derived quartzites in fluvial gravel on the crest of the Bear Lake Plateau east of Bear Lake suggests that the present headwaters were not part of the drainage basin in the late Tertiary. Newly mapped glacial deposits in the Bear River Range west of Bear Lake indicate several advances of valley glaciers that were probably coeval with glaciations in the Uinta Mountains. Much of the meltwater from these glaciers may have reached Bear Lake via groundwater pathways through infiltration in the karst terrain of the Bear River Range. At times during the Pleistocene, the Bear River flowed into Bear Lake and water level rose to the valley threshold at Nounan narrows. This threshold has been modified by aggradation, downcutting, and tectonics. Maximum lake levels have decreased from as high as 1830 m to 1806 m above sea level since the early Pleistocene due to episodic downcutting by the Bear River. The oldest exposed lacustrine sediments in Bear Lake Valley are probably of Pliocene age. Several high-lake phases during the early and middle Pleistocene were separated by episodes of fluvial incision. Threshold incision was not constant, however, because lake highstands of as much as 8 m above bedrock threshold level resulted from aggradation and possibly landsliding at least twice during the late-middle and late Pleistocene. Abandoned stream channels within the low-lying, fault-bounded region between Bear Lake and the modern Bear River show that Bear River progressively shifted northward during the Holocene. Several factors including faulting, location of the fluvial fan, and channel migration across the fluvial fan probably interacted to produce these changes in channel position. Late Quaternary slip rates on the east Bear Lake fault zone are estimated by using the water-level history of Bear Lake, assuming little or no displacement on dated deposits on the west side of the valley. Uplifted lacustrine deposits representing Pliocene to middle Pleistocene highstands of Bear Lake on the footwall block of the east Bear Lake fault zone provide dramatic evidence of long-term slip. Slip rates during the late Pleistocene increased from north to south along the east Bear Lake fault zone, consistent with the tectonic geomorphology. In addition, slip rates on the southern section of the fault zone have apparently decreased over the past 50 k.y. Copyright ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗

Mesozoic California and the underflow of Pacific mantle

The Mesozoic evolution of California is interpreted as dominated by the underflow of oceanic mantle beneath the continental margin. Underflow during part of Late Cretaceous time of more than 2000 km of the eastern Pacific plate seems required by the marine magnetic data. Correspondingly, varied oceanic environments—abyssal hill, island arc, trench, oceanic crust, and upper mantle, perhaps also continental rise and abyssal plain—appear to be represented in the eugeosynclinal terranes of California. The rock juxtapositions accord with the concept that these materials were scraped off against the continent as the oceanic plate slid beneath it along Mesozoic Benioff seismic zones, which are now seen as serpentine belts separating profoundly different rock assemblages. The chaotic Franciscan Formation of coastal California consists of deep-ocean Late Jurassic to Late Cretaceous sedimentary, volcanic, crustal, and mantle materials. As open-ocean abyssal oozes and the oceanic crust beneath them were swept into the Benioff-zone trench at the continental margin, they were covered by terrigenous clastic sediments, and the entire complex was carried beneath the correlative continental-shelf and continental-slope deposits (Great Valley sequence) and the older Mesozoic complexes. The other eugeosynclinal terranes of California can be interpreted, albeit with less confidence, in similar terms of underflow of Pacific mantle. In the Klamath Mountains and northern Sierra Nevada, for example, Ordovician and Silurian ocean-floor materials, overlain by or juxtaposed against an Upper Silurian to Permian island arc, were swept in first to the continent, along with a large fragment of oceanic crust and mantle and another fragment of an old orogenic belt. This debris was followed by Permian and Triassic ocean-floor deposits. Late Triassic and Jurassic volcanic products from stocks and batholiths forming in the welded complexes lapped across both landward and oceanward sides of the region. Reversal of Cenozoic extension, strike-slip faulting, and volcanic crustal growth in the western United States reveals a Cretaceous tectonic pattern strikingly like the modern pattern of the Andes, so the paleotectonic setting of North America can be inferred from the South American present. The Mesozoic batholiths of North America, like the late Cenozoic volcanic belt of the central Andes, are products of the same rapid motion of oceanic plates that carried oceanic sediments against the continent to form eugeosynclinal terranes. Magmas generated in the Benioff zones formed the batholiths and the volcanic fields which initially capped them.

California↗