Search USGS⌕ Search

SEARCH · Search USGS

Results for “Information Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41Linked to original sources
USGS1980

Hydrogeologic data for the lower Connecticut River basin, Connecticut

This report contains geologic, ground-water, and miscellaneous data on the quality of surface water collected for a water-resources inventory of the lower Connecticut River basin, Connecticut. The study was made by the U.S. Geological Survey in fiscal cooperation with the Connecticut Department of Environmental Protection. A companion report (Connecticut Water Resources Bulletin No. 31, in preparation) interprets the factual information presented here or otherwise collected for the study.

Connecticut↗
USGS1965

Calculations of upper-mantle velocity from published Soviet earthquake data

The lack of information on mantle velocities and crustal structure of the U.S.S.R. has led to a preliminary examination of published Soviet earthquake bulletins in the hope of deriving useful velocity and structure information from the data they contain. Mantle velocities deduced from earthquake data on several Russian earthquakes are in excellent agreement with results of Soviet deep seismic sounding.

Soviet Union↗
USGS2011

Database for potential hazards from future volcanic eruptions in California

More than 500 volcanic vents have been identified in the State of California. At least 76 of these vents have erupted, some repeatedly, during the past 10,000 yr. Past volcanic activity has ranged in scale and type from small rhyolitic and basaltic eruptions through large catastrophic rhyolitic eruptions. Sooner or later, volcanoes in California will erupt again, and they could have serious impacts on the health and safety of the State's citizens as well as on its economy. This report describes the nature and probable distribution of potentially hazardous volcanic phenomena and their threat to people and property. It includes hazard-zonation maps that show areas relatively likely to be affected by future eruptions in California. This digital release contains information from maps of potential hazards from future volcanic eruptions in the state of California, published as Plate 1 in U.S. Geological Survey Bulletin 1847. The main component of this digital release is a spatial database prepared using geographic information systems (GIS) applications. This release also contains links to files to view or print the map plate, main report text, and accompanying hazard tables from Bulletin 1847. It should be noted that much has been learned about the ages of eruptive events in the State of California since the publication of Bulletin 1847 in 1989. For the most up to date information on the status of California volcanoes, please refer to the U.S. Geological Survey Volcano Hazards Program website.

California↗
USGS2023

MLAAPDE: A machine learning dataset for determining global earthquake source parameters

The Machine Learning Asset Aggregation of the Preliminary Determination of Epicenters (MLAAPDE) dataset is a labeled waveform archive designed to enable rapid development of machine learning (ML) models used in seismic monitoring operations. MLAAPDE consists of more than 5.1 million recordings of 120 s long three‐component broadband waveform data (raw counts) for P , Pn , Pg , S , Sn , and Sg arrivals. The labeled catalog is collected from the U.S. Geological Survey National Earthquake Information Center’s (NEIC) Preliminary Determination of Epicenters bulletin, which includes local to teleseismic observations for earthquakes ∼ M 2.5 and larger. Each arrival in the labeled dataset has been manually reviewed by NEIC staff. An accompanying Python module enables users to develop customized training datasets, which includes different time‐series lengths, distance ranges, sampling rates, and/or phase lists. MLAAPDE is distinct from other publicly available datasets in containing local (14%), regional (36%), and teleseismic (50%) observations, in which local, regional, and teleseismic distance are 0°–3°, 3°–30°, and 30°+, respectively. A recent version of the dataset is publicly available (see Data and Resources ), and user‐specific versions can be generated locally with the accompanying software. MLAAPDE is an NEIC supported, curated, and periodically updated dataset that can contribute to seismological ML research and development.

Seismological Research Letters↗
USGS1970

Hydrogeologic data for the lower Housatonic River basin, Connecticut

This report contains hydrologic and geologic data collected for an investigation of the lower Housatonic River basin by the U.S. Geological Survey in financial cooperation with the Connecticut Water Resources Commission. The report also summarizes data that are available in other publications. The towns within the 557 square mile area of the basin in western Connecticut include all of Beacon Falls, Middlebury, Naugatuck, Oxford, Seymour, Thomaston, Waterbury, Watertown, and Woodbury; and parts of Ansonia, Bethany, Bethlehem, Bristol, Burlington, Cheshire, Derby, Easton, Goshen, Narwinton, Litchfield, Milford, Monroe, Morris, New Hartford, Newtown, Norfolk, Orange, Plymouth, Prospect, Roxbury, Shelton, Southbury, Stratford, Torrington, Trumbull, Washington, Winchester, Wolcott, and Woodbridge. The factual information on the following pages was the basis for a companion interpretive report, Connecticut Water Resources Bulletin No. 19 (Wilson, W. E., and others, in preparation, 1970). The basic-data report can be used alone for detailed information needed in planning water resources development at specific sites or it can be used to supplement the interpretive report. Data were collected for this investigation from 1965 to 1967. Water levels measured in wells as part of this investigation were published in Connecticut Water Resources Bulletin No. 7 (Meikle and Baker, 1965) and No. 13 (Meikle, 1967) with water-level data from other wells throughout the State. Publications containing relevant ground-water information are listed on page those concerned with streamflow are on page 5 and those on quality of water, are on page 6. The locations of sites at which data were collected are shown on plate A in the back pocket of this report. Data presented here were collected by the U.S. Geological Survey unless otherwise noted.

Connecticut↗
USGS1906

Record of deep-well drilling for 1905

The present is the second of the series of reports on the collection of deep-well samples, the first of which, covering the period from the beginning of the work July 1, 1904, to December 31, 1904, was published as Bulletin No. 264. This report presents the records of a large number of wells from which more or less complete sets of samples have been secured and placed on file at the Survey, and. also many additional records not represented by samples. The work has been conducted by the eastern section, division of hydrology, the expense being shared with the western section of hydrology and the geologic branch. The writer has continued in charge of the investigations and has been assisted by Messrs. E. F. Lines and Samuel Sanford. The burden of executive details has fallen mainly on Mr. Sanford since his assignment to the work on its relinquishment by Mr. Lines April 1. The methods followed are in most particulars those formulated by Mr. A. C. Veatch on the inauguration of the work in 1904, but to Mr. Sanford is due the credit for materially increasing the usefulness of the work to the driller, especially in furnishing geologic information.

Bulletin↗
USGS1994

Helping the public find information the U.S. Government Information Locator Service (GILS)

As part of the National Information Infrastructure, the U.S. federal government is establishing a Government Information Locator Service (GILS). GILS will identify and describe public information resources throughout the federal government and provide assistance in obtaining the information. It will be decentralized and will supplement other agency and commercial information dissemination mechanisms. The public will use GILS directly or through intermediaries, including the Government Printing Office and the National Technical Information Service, as well as federal depository libraries, other public libraries, and private sector information services. Direct users will have access to a GILS Core accessible on the Internet without charge. Intermediate access may include kiosks, 800 numbers, electronic mail, bulletin boards, FAX, and offline media such as floppy disks, CD-ROM, and printed works. GILS will use network technology and the American National Standards Institute Z39.50 standard for information search and retrieval so that information can be retrieved in a variety of ways. Direct users may have access to many other major federal and nonfederal information resources, linkages to data systems, and electronic delivery of information products. An Office of Management and Budget Bulletin in 1994 will provide implementing guidance to agencies. The National Institute of Standards and Technology will also establish a Federal Information Processing Standard specifying a GILS Profile and its application for agencies establishing information locators.

Journal of Government Information↗
USGS2001

Confidence intervals for expected moments algorithm flood quantile estimates

Historical and paleoflood information can substantially improve flood frequency estimates if appropriate statistical procedures are properly applied. However, the Federal guidelines for flood frequency analysis, set forth in Bulletin 17B, rely on an inefficient “weighting” procedure that fails to take advantage of historical and paleoflood information. This has led researchers to propose several more efficient alternatives including the Expected Moments Algorithm (EMA), which is attractive because it retains Bulletin 17B's statistical structure (method of moments with the Log Pearson Type 3 distribution) and thus can be easily integrated into flood analyses employing the rest of the Bulletin 17B approach. The practical utility of EMA, however, has been limited because no closed‐form method has been available for quantifying the uncertainty of EMA‐based flood quantile estimates. This paper addresses that concern by providing analytical expressions for the asymptotic variance of EMA flood‐quantile estimators and confidence intervals for flood quantile estimates. Monte Carlo simulations demonstrate the properties of such confidence intervals for sites where a 25‐ to 100‐year streamgage record is augmented by 50 to 150 years of historical information. The experiments show that the confidence intervals, though not exact, should be acceptable for most purposes.

Water Resources Research↗
USGS2009

Comment on "Revisiting the 1872 owens valley, California, earthquake" by Susan E. Hough and Kate Hutton

Bakun (2009) argues that the conclusions of Hough and Hutton (2008) are wrong because the study failed to take into account the Sierra Nevada attenuation model of Bakun (2006). In particular, Bakun (2009) argues that propagation effects can explain the relatively high intensities generated by the 1872 Owens Valley earthquake. Using an intensity attenuation model that attempts to account for attenuation through the Sierra Nevada, Bakun (2006) infers the magnitude estimate (M w 7.4–7.5) that is currently accepted by National Earthquake Information Center (NEIC).

Bulletin of the Seismological Society of America↗
USGS1988

Toward a Federal Land Information System: Experiences and issues

From 1983 to 1987, the U.S. Geological Survey conducted research to develop a national resource data base of Federal lands under the auspices of the Federal Land Information System (FLIS) program. The program's goal was to develop the capability to provide information to national mineral-use policymakers. Prototype spatial data bases containing mineral, land status, and base cartographic data were developed for the Medford, Oreg., area, the State of Alaska, and the Silver City, N. Mex., area. Other accomplishments included (1) the preparation of a digital format for U.S. Geological Survey mineral assessment data and (2) the development of a procedure for integrating parcel-level tabular Alaska land status data into a section-level geographic information system. Overall findings indicated that both vector and raster capabilities are required for a FLIS and that nationwide data availability is a limiting factor in FLIS development. As a result of a 1986 interbureau (U.S. Geological Survey, Bureau of Land Management, and Bureau of Mines) review of the FLIS program, activities were redirected to undertake research on large-area geographic information system techniques. Land use and land cover data generalization strategies were tested, and areafiltering software was found to be the optimum type. In addition, a procedure was developed for transferring tabular land status data of surveyed areas in the contiguous 48 States to spatial data for use in geographic information systems. The U.S. Geological Survey FLIS program, as an administrative unit, ended in 1987, but FLIS-related research on large-area geographic information systems continues.

Bulletin↗
USGS1954

U.S. Geological Survey Trace Elements and related reports through 1953

This report combines and brings up-to-date the information previously given in Trace Elements Investigations Report 325, "Numerical list of U.S. Geological Survey Trace Elements Reports to April 30, 1953," and Trace Elements Investigations Report 301, "Topical index and bibliography of U.S. Geological Survey Trace Elements and related reports." Part I is a numerical list of U.S. Geological Survey Trace Elements Investigations and Memorandum reports. It supersedes TEI-325. This part lists not only reports (followed by a date) that have been transmitted to the U.S. Atomic Energy Commission, but also reports in preparation (followed by an asterisk) for which tentative titles were available on December 31, 1953. Reports that have been published are indicated by the abbreviation of the medium of publication. (See also part II.) Part II is a reference guide to Trace Elements and related reports that are available to the public; this part supersedes Part 2 of the TEI-301 (published as Geological survey Circular 281). These reports are grouped according to the type of publication or release. Abstracts published in Nuclear Science Abstracts are not included in Part II, although certain TEI and TEM reports, the abstracts of which have been published in NSA, are so indicated in Part I. Publications in process on December 31, 1953, are designated by an asterisk. Part III is a finding list of states, areas, and subjects. It is based on information derived mostly from the titles of reports and, where titles are of a general nature, from a cursory review of the reports. This list is not a complete index of the information given in Trace Elements and related reports, but is designed to find subjects of major interest. Because of the numerous entries for Colorado and Utah, information has been listed by counties and, where possible, by subject under these states. Other states have county listings only if a county is included in the title of a report; otherwise, areas may be listed separately under the state. Major subjects are listed separately in the index and also where appropriate under states. Analytical methods and subjects related to analytical research are listed under Analytical Methods and Research, but not separately throughout the index. Most mineralogic studies are included under the heading Mineralogy, but are not necessarily listed according to location. Part IV is a finding list of authors. The words “with” and “and” are used to indicate seniority of authorship. For example, a listing of Jones and Brown indicates that Jones is the senior author. A listing of Jones with Brown indicates that Brown is the senior author. In both parts III and IV all Trace Elements reports are listed, as well as other related reports that have not been issued as Trace Elements reports. The following standard abbreviations have been used: TEI, Trace Elements Investigations report; TEM, Trace Elements Memorandum report; P, Professional Paper; B, Bulletin; C, Circular; J, Journal; OF, open file; TIS, Technical Information Service release; NSA, Nuclear Science Abstracts; QM, Quadrangle Map Series; and OM, Oil and Gas map or Mineral Investigations map or report.

Trace Elements Investigations↗
USGS2008

Compilation of Disruptions to Airports by Volcanic Activity (Version 1.0, 1944-2006)

Volcanic activity has caused significant hazards to numerous airports worldwide, with local to far-ranging effects on travelers and commerce. To more fully characterize the nature and scope of volcanic hazards to airports, we collected data on incidents of airports throughout the world that have been affected by volcanic activity, beginning in 1944 with the first documented instance of damage to modern aircraft and facilities in Naples, Italy, and extending through 2006. Information was gleaned from various sources, including news outlets, volcanological reports (particularly the Smithsonian Institution's Bulletin of the Global Volcanism Network), and previous publications on the topic. This report presents the full compilation of the data collected. For each incident, information about the affected airport and the volcanic source has been compiled as a record in a Microsoft Access database. The database is incomplete in so far as incidents may not have not been reported or documented, but it does present a good sample from diverse parts of the world. Not included are en-route diversions to avoid airborne ash clouds at cruise altitudes. The database has been converted to a Microsoft Excel spreadsheet. To make the PDF version of table 1 in this open-file report resemble the spreadsheet, order the PDF pages as 12, 17, 22; 13, 18, 23; 14, 19, 24; 15, 20, 25; and 16, 21, 26. Analysis of the database reveals that, at a minimum, 101 airports in 28 countries were impacted on 171 occasions from 1944 through 2006 by eruptions at 46 volcanoes. The number of affected airports (101) probably is better constrained than the number of incidents (171) because recurring disruptions at a given airport may have been lumped together or not reported by news agencies, whereas the initial disruption likely is noticed and reported and thus the airport correctly counted.

Open-File Report↗
USGS2004

Log Pearson type 3 quantile estimators with regional skew information and low outlier adjustments

The recently developed expected moments algorithm (EMA) [ Cohn et al. , 1997 ] does as well as maximum likelihood estimations at estimating log‐Pearson type 3 (LP3) flood quantiles using systematic and historical flood information. Needed extensions include use of a regional skewness estimator and its precision to be consistent with Bulletin 17B . Another issue addressed by Bulletin 17B is the treatment of low outliers. A Monte Carlo study compares the performance of Bulletin 17B using the entire sample with and without regional skew with estimators that use regional skew and censor low outliers, including an extended EMA estimator, the conditional probability adjustment (CPA) from Bulletin 17B , and an estimator that uses probability plot regression (PPR) to compute substitute values for low outliers. Estimators that neglect regional skew information do much worse than estimators that use an informative regional skewness estimator. For LP3 data the low outlier rejection procedure generally results in no loss of overall accuracy, and the differences between the MSEs of the estimators that used an informative regional skew are generally modest in the skewness range of real interest. Samples contaminated to model actual flood data demonstrate that estimators which give special treatment to low outliers significantly outperform estimators that make no such adjustment.

Water Resources Research↗
USGS2008

GAP Analysis Bulletin Number 15

The Mission of the Gap Analysis Project (GAP) <http://gapanalysis.nbii.gov> is to promote conservation by providing broad geographic information on biological diversity to resource managers, planners, and policy makers who can use the information to make informed decisions. As part of the National Biological Information Infrastructure (NBII) <http://www.nbii.gov>?a collaborative program to provide increased access to data and information on the nation?s biological resources--GAP data and analytical tools have been used in hundreds of applications: from basic research to comprehensive state wildlife plans; from educational projects in schools to ecoregional assessments of biodiversity. The challenge: keeping common species common means protecting them BEFORE they become threatened. To do this on a state or regional basis requires key information such as land cover descriptions, predicted distribution maps for native animals, and an assessment of the level of protection currently given to those plants and animals. GAP works cooperatively with Federal, state, and local natural resource professionals and academics to provide this kind of information. GAP activities focus on the creation of state and regional databases and maps that depict patterns of land management, land cover, and biodiversity. These data can be used to identify ?gaps? in conservation--instances where an animal or plant community is not adequately represented on the existing network of conservation lands. GAP is administered through the U.S. Geological Survey. Through building partnerships among disparate groups, GAP hopes to foster the kind of collaboration that is needed to address conservation issues on a broad scale. For more information, contact: John Mosesso National GAP Director 703-648-4079 Kevin Gergely National GAP Operations Manager 208-885-3565

GAP Bulletin↗
USGS2008

Canadian groundwater inventory: Regional hydrogeological characterization of the south-central part of the maritimes basin

The Maritimes Groundwater Initiative (MGWI) is a large, integrated, regional hydrogeological study focusing on a representative area of the Maritimes Basin in eastern Canada. The study area covers a land surface of 10 500 km 2 , of which 9 400 km 2 are underlain by sedimentary rocks. This sedimentary bedrock is composed of a sequence of discontinuous strata of highly variable hydraulic properties, and is generally overlain by a thin layer of glacial till(mostly 4-8 m thick, but can reach 20 m). Depending on the area, 46 to 100% of the population relieson groundwater for water supply, either from municipal wells or from private residential wells. The main objectives of this project were to improve the general understanding of groundwater-flow dynamics and to provide baseline information and tools for a regional groundwater-resource assessment. This bulletin presents the current state of understanding of this hydrogeological system, along with the methodology used to characterize and analyze its distinct behaviour at three different scales. This regional bedrock aquifer system contains confined and unconfined zones, and each of its lenticular permeable strata extends only a few kilometres. Preferential groundwater recharge occurs where sandy till is present. The mean annual recharge rate to the bedrock is estimated to range between 130 and 165 mm/a. Several geological formations of this basin provide good aquifers, with hydraulic conductivity in the range 5x10 -6 to 10 -4 m/s. Based on results of numerical flow modelling, faults were interpreted to have a key role in the regional flow. Pumping-test results revealed that the fractured aquifers can locally be very heterogeneous and anisotropic, but behave similarly to porous media. Work performed at the local scale indicated that most water-producing fractures seem to be subhorizontal and generally oriented in a northeasterly direction, in agreement with regional structures and pumping-test results. Almost all residential wells are shallow (about 20 m) open holes that are cased only through the surficial sediments.

Bulletin of the Geological Survey of Canada↗
USGS1964

Studies of pre-Selma Cretaceous core samples from the outcrop area in western Alabama

In 1954 four core holes were drilled in the pre-Selma Cretaceous strata of the Alabama Coastal Plain in order to get unweathered samples within a few miles of the outcrops. During the next few years several specialists studied the cores, and their reports are published as consecutive parts of this bulletin. Watson H. Monroe, who spent many years studying the Coastal Plain strata in Alabama and Mississippi, conceived and supervised the drilling and planned the later studies. His earlier published report (W. H. Monroe, 1955, Cores of pre-Selma Cretaceous rocks in the outcrop area in western Alabama: Gulf Coast Geol. Societies Trans., v. 5, p. 11-37) contains a brief description of the stratigraphy, together with logs and other information regarding the core holes, and he has provided the introductory chapter to this bulletin. Richard E. Bergenback studied the petrology of the cores, which included finding the distribution of grain sizes, determining the mineralogy of the grains and the matrix of the sediments, and having X-Ray identifications made of the clay minerals. Norman F. Sohl studied the mollusks and other large fossils obtained from the cores and compared them with other faunal suites collected in Alaban1a and Texas. Esther R. Applin studied the sparse microfauna, comparing it with faunas obtained from deep wells downdip in Georgia, Alabama, and Mississippi and with outcrop samples fron1 Texas, and has described a new species of Foraminifera. Estella B. Leopold and Helen M. Pakiser obtained a large pollen and spore assemblage by digesting carbonaceous layers of some of the cores in acid; this flora includes much new material, which is not described here. The Bergenback, Sohl, and Applin reports discuss the probable environment in which the sediments accumulated. Louis C. Conant, who spent several years studying and mapping these sediments, has written a summary chapter integrating some of the surface and subsurface information. Quarter-cuts of the cores belonging to the U.S. National Museum have been deposited on indefinite loan with the Alabama Geological Survey at University, Ala., and with the Shell Oil Co. at Jackson, Miss. They are available there for inspection and study.

Bulletin↗
USGS2018

Methods for peak-flow frequency analysis and reporting for streamgages in or near Montana based on data through water year 2015

This report documents the methods for peak-flow frequency (hereinafter “frequency”) analysis and reporting for streamgages in and near Montana following implementation of the Bulletin 17C guidelines. The methods are used to provide estimates of peak-flow quantiles for 50-, 42.9-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent annual exceedance probabilities for selected streamgages operated by the U.S. Geological Survey Wyoming-Montana Water Science Center (WY–MT WSC). These annual exceedance probabilities correspond to 2-, 2.33-, 5-, 10-, 25-, 50-, 100-, 200-, and 500-year recurrence intervals, respectively. Standard procedures specific to the WY–MT WSC for implementing the Bulletin 17C guidelines include (1) the use of the Expected Moments Algorithm analysis for fitting the log-Pearson Type III distribution, incorporating historical information where applicable; (2) the use of weighted skew coefficients (based on weighting at-site station skew coefficients with generalized skew coefficients from the Bulletin 17B national skew map); and (3) the use of the Multiple Grubbs-Beck Test for identifying potentially influential low flows. For some streamgages, the peak-flow records are not well represented by the standard procedures and require user-specified adjustments informed by hydrologic judgement. The specific characteristics of peak-flow records addressed by the informed-user adjustments include (1) regulated peak-flow records, (2) atypical upper-tail peak-flow records, and (3) atypical lower-tail peak-flow records. In all cases, the informed-user adjustments use the Expected Moments Algorithm fit of the log-Pearson Type III distribution using the at-site station skew coefficient, a manual potentially influential low flow threshold, or both. Appropriate methods can be applied to at-site frequency estimates to provide improved representation of long-term hydroclimatic conditions. The methods for improving at-site frequency estimates by weighting with regional regression equations and by Maintenance of Variance Extension Type III record extension are described. Frequency analyses were conducted for 99 example streamgages to indicate various aspects of the frequency- analysis methods described in this report. The frequency analyses and results for the example streamgages are presented in a separate data release associated with this report consisting of tables and graphical plots that are structured to include information concerning the interpretive decisions involved in the frequency analyses. Further, the separate data release includes the input files to the PeakFQ program, version 7.1, including the peak-flow data file and the analysis specification file that were used in the peak-flow frequency analyses. Peak-flow frequencies are also reported in separate data releases for selected streamgages in the Beaverhead River and Clark Fork Basins and also for selected streamgages in the Ruby, Jefferson, and Madison River Basins.

Montana↗