Search USGS⌕ Search

SEARCH · Search USGS

Results for “Water Resources Update”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
USGS2013

Evaluation of the groundwater-flow model for the Ohio River alluvial aquifer near Carrollton, Kentucky, updated to conditions in September 2010

The Ohio River alluvial aquifer near Carrollton, Ky., is an important water resource for the cities of Carrollton and Ghent, as well as for several industries in the area. The groundwater of the aquifer is the primary source of drinking water in the region and a highly valued natural resource that attracts various water-dependent industries because of its quantity and quality. This report evaluates the performance of a numerical model of the groundwater-flow system in the Ohio River alluvial aquifer near Carrollton, Ky., published by the U.S. Geological Survey in 1999. The original model simulated conditions in November 1995 and was updated to simulate groundwater conditions estimated for September 2010. The files from the calibrated steady-state model of November 1995 conditions were imported into MODFLOW-2005 to update the model to conditions in September 2010. The model input files modified as part of this update were the well and recharge files. The design of the updated model and other input files are the same as the original model. The ability of the updated model to match hydrologic conditions for September 2010 was evaluated by comparing water levels measured in wells to those computed by the model. Water-level measurements were available for 48 wells in September 2010. Overall, the updated model underestimated the water levels at 36 of the 48 measured wells. The average difference between measured water levels and model-computed water levels was 3.4 feet and the maximum difference was 10.9 feet. The root-mean-square error of the simulation was 4.45 for all 48 measured water levels. The updated steady-state model could be improved by introducing more accurate and site-specific estimates of selected field parameters, refined model geometry, and additional numerical methods. Collection of field data to better estimate hydraulic parameters, together with continued review of available data and information from area well operators, could provide the model with revised estimates of conductance values for the riverbed and valley wall, hydraulic conductivities for the model layer, and target water levels for future simulations. Additional model layers, a redesigned model grid, and revised boundary conditions could provide a better framework for more accurate simulations. Additional numerical methods would identify possible parameter estimates and determine parameter sensitivities.

Kentucky↗
USGS2026

Simulations of Minnesota water budget components using the Soil-Water-Balance model, past (1981-2022) and future (2040-2059 and 2080-2099)

This study presents historical estimates and future projections of net infiltration (potential recharge), actual evapotranspiration (ET), surface runoff, and related water budget components across Minnesota using the USGS Soil Water Balance model, version 2 (SWB). The model was calibrated to streamflow and actual ET observations from 2000–2022, achieving an overall r² of 0.973 with a standard error of 0.002 inches per year (in/yr). Two primary sets of simulations were produced. First, historical water budget components for 1981–2022 were estimated using observed daily PRISM weather data. During this period, Minnesota’s mean annual precipitation was 28.5 in/yr. The calibrated SWB model simulated mean annual actual ET of 21.6 in/yr, mean annual surface runoff of 3.0 in/yr, and mean annual net infiltration of 4.0 in/yr for Minnesota. Second, water budget component projections were simulated for 1995–2014, 2040–59, and 2080–99 using 4 kilometer, dynamically downscaled climate models representing intermediate, high, and very high emissions scenarios. All future climate models showed warming relative to the historical period, leading to consistent responses in temperature‑sensitive components on an annual basis: less snowfall and snowmelt and higher reference ET. Seasonal shifts were also apparent, with most models projecting increases in winter precipitation, actual ET, runoff, and net infiltration, and decreases in summer and fall precipitation, actual ET, and net infiltration relative to the historical period. The accompanying data products are intended for estimating multi-year mean water budget components at spatial scales no smaller than the smallest watershed included in model calibration (about 20 square miles). These updated historical estimates and future projections provide decision relevant information for water resource managers and offer a framework for developing long range projections of water budget variables.

EarthArXiv↗
USGS2016

Methods for estimating peak-flow frequencies at ungaged sites in Montana based on data through water year 2011: Chapter F in Montana StreamStats

The U.S. Geological Survey (USGS), in cooperation with the Montana Department of Natural Resources and Conservation, completed a study to update methods for estimating peak-flow frequencies at ungaged sites in Montana based on peak-flow data at streamflow-gaging stations through water year 2011. The methods allow estimation of peak-flow frequencies (that is, peak-flow magnitudes, in cubic feet per second, associated with annual exceedance probabilities of 66.7, 50, 42.9, 20, 10, 4, 2, 1, 0.5, and 0.2 percent) at ungaged sites. The annual exceedance probabilities correspond to 1.5-, 2-, 2.33-, 5-, 10-, 25-, 50-, 100-, 200-, and 500-year recurrence intervals, respectively. Regional regression analysis is a primary focus of Chapter F of this Scientific Investigations Report, and regression equations for estimating peak-flow frequencies at ungaged sites in eight hydrologic regions in Montana are presented. The regression equations are based on analysis of peak-flow frequencies and basin characteristics at 537 streamflow-gaging stations in or near Montana and were developed using generalized least squares regression or weighted least squares regression. All of the data used in calculating basin characteristics that were included as explanatory variables in the regression equations were developed for and are available through the USGS StreamStats application (http://water.usgs.gov/osw/streamstats/) for Montana. StreamStats is a Web-based geographic information system application that was created by the USGS to provide users with access to an assortment of analytical tools that are useful for water-resource planning and management. The primary purpose of the Montana StreamStats application is to provide estimates of basin characteristics and streamflow characteristics for user-selected ungaged sites on Montana streams. The regional regression equations presented in this report chapter can be conveniently solved using the Montana StreamStats application. Selected results from this study were compared with results of previous studies. For most hydrologic regions, the regression equations reported for this study had lower mean standard errors of prediction (in percent) than the previously reported regression equations for Montana. The equations presented for this study are considered to be an improvement on the previously reported equations primarily because this study (1) included 13 more years of peak-flow data; (2) included 35 more streamflow-gaging stations than previous studies; (3) used a detailed geographic information system (GIS)-based definition of the regulation status of streamflow-gaging stations, which allowed better determination of the unregulated peak-flow records that are appropriate for use in the regional regression analysis; (4) included advancements in GIS and remote-sensing technologies, which allowed more convenient calculation of basin characteristics and investigation of many more candidate basin characteristics; and (5) included advancements in computational and analytical methods, which allowed more thorough and consistent data analysis. This report chapter also presents other methods for estimating peak-flow frequencies at ungaged sites. Two methods for estimating peak-flow frequencies at ungaged sites located on the same streams as streamflow-gaging stations are described. Additionally, envelope curves relating maximum recorded annual peak flows to contributing drainage area for each of the eight hydrologic regions in Montana are presented and compared to a national envelope curve. In addition to providing general information on characteristics of large peak flows, the regional envelope curves can be used to assess the reasonableness of peak-flow frequency estimates determined using the regression equations.

Montana↗
USGS2010

Model Refinement and Simulation of Groundwater Flow in Clinton, Eaton, and Ingham Counties, Michigan

A groundwater-flow model that was constructed in 1996 of the Saginaw aquifer was refined to better represent the regional hydrologic system in the Tri-County region, which consists of Clinton, Eaton, and Ingham Counties, Michigan. With increasing demand for groundwater, the need to manage withdrawals from the Saginaw aquifer has become more important, and the 1996 model could not adequately address issues of water quality and quantity. An updated model was needed to better address potential effects of drought, locally high water demands, reduction of recharge by impervious surfaces, and issues affecting water quality, such as contaminant sources, on water resources and the selection of pumping rates and locations. The refinement of the groundwater-flow model allows simulations to address these issues of water quantity and quality and provides communities with a tool that will enable them to better plan for expansion and protection of their groundwater-supply systems. Model refinement included representation of the system under steady-state and transient conditions, adjustments to the estimated regional groundwater-recharge rates to account for both temporal and spatial differences, adjustments to the representation and hydraulic characteristics of the glacial deposits and Saginaw Formation, and updates to groundwater-withdrawal rates to reflect changes from the early 1900s to 2005. Simulations included steady-state conditions (in which stresses remained constant and changes in storage were not included) and transient conditions (in which stresses changed in annual and monthly time scales and changes in storage within the system were included). These simulations included investigation of the potential effects of reduced recharge due to impervious areas or to low-rainfall/drought conditions, delineation of contributing areas with recent pumping rates, and optimization of pumping subject to various quantity and quality constraints. Simulation results indicate potential declines in water levels in both the upper glacial aquifer and the upper sandstone bedrock aquifer under steady-state and transient conditions when recharge was reduced by 20 and 50 percent in urban areas. Transient simulations were done to investigate reduced recharge due to low rainfall and increased pumping to meet anticipated future demand with 24 months (2 years) of modified recharge or modified recharge and pumping rates. During these two simulation years, monthly recharge rates were reduced by about 30 percent, and monthly withdrawal rates for Lansing area production wells were increased by 15 percent. The reduction in the amount of water available to recharge the groundwater system affects the upper model layers representing the glacial aquifers more than the deeper bedrock layers. However, with a reduction in recharge and an increase in withdrawals from the bedrock aquifer, water levels in the bedrock layers are affected more than those in the glacial layers. Differences in water levels between simulations with reduced recharge and reduced recharge with increased pumping are greatest in the Lansing area and least away from pumping centers, as expected. Additionally, the increases in pumping rates had minimal effect on most simulated streamflows. Additional simulations included updating the estimated 10-year wellhead-contributing areas for selected Lansing-area wells under 2006-7 pumping conditions. Optimization of groundwater withdrawals with a water-resource management model was done to determine withdrawal rates while minimizing operational costs and to determine withdrawal locations to achieve additional capacity while meeting specified head constraints. In these optimization scenarios, the desired groundwater withdrawals are achieved by simulating managed wells (where pumping rates can be optimized) and unmanaged wells (where pumping rates are not optimized) and by using various combinations of existing and proposed well locations.

Scientific Investigations Report↗
USGS2020

Bathymetric surveys of Morse and Geist Reservoirs in central Indiana made with a multibeam echosounder, 2016, and comparison with previous surveys

The U.S. Geological Survey, in cooperation with Citizens Energy Group, conducted a bathymetric survey of Morse and Geist Reservoirs in central Indiana in April and May of 2016 with a multibeam echosounder. Both reservoirs serve as water supply, flood control, and recreational resources for the city of Indianapolis and the surrounding communities. Morse and Geist Reservoirs were surveyed to create updated bathymetric maps, determine storage capacities (volume) at specified water-surface elevations, and compare current conditions to historical surveys. Bathymetric data were collected using a high-resolution multibeam echosounder, and supplemental data were collected in coves and other shallow areas using an acoustic Doppler current profiler. The data were processed and combined using HYPACK and ArcMap software to develop a triangulated irregular network, a 5-foot gridded bathymetric dataset, a reservoir capacity table, and a bathymetric contour map for each reservoir. The computed volume of Morse Reservoir was 23,136 acre-feet (7.54 billion gallons) with a surface area of 1,439 acres (62.7 million square feet). The computed volume of Geist Reservoir was 21,146 acre-feet (6.89 billion gallons) with a surface area of 1,853 acres (80.7 million square feet). Between 1996 and 2016, lake bottom elevations have increased by a mean of 0.32 feet in Morse Reservoir and 0.27 feet in Geist Reservoir. The data indicate higher sedimentation rates in the upper parts of each reservoir as compared to near the dam and higher sedimentation rates in Morse Reservoir (0.5 inch per year) than in Geist Reservoir (0.2 inch per year). The differences between the current and historical surveys may be due to sedimentation, differences in accuracy between previous surveys, or a combination of both.

Indiana↗
USGS2012

Planned updates and refinements to the Central Valley hydrologic model with an emphasis on improving the simulation of land subsidence in the San Joaquin Valley

California's Central Valley has been one of the most productive agricultural regions in the world for more than 50 years. To better understand the groundwater availability in the valley, the U.S. Geological Survey (USGS) developed the Central Valley hydrologic model (CVHM). Because of recent water-level declines and renewed subsidence, the CVHM is being updated to better simulate the geohydrologic system. The CVHM updates and refinements can be grouped into two general categories: (1) model code changes and (2) data updates. The CVHM updates and refinements will require that the model be recalibrated. The updated CVHM will provide a detailed transient analysis of changes in groundwater availability and flow paths in relation to climatic variability, urbanization, stream flow, and changes in irrigated agricultural practices and crops. The updated CVHM is particularly focused on more accurately simulating the locations and magnitudes of land subsidence. The intent of the updated CVHM is to help scientists better understand the availability and sustainability of water resources and the interaction of groundwater levels with land subsidence.

California↗
USGS1994

U. S. Geological Survey Federal-State Cooperative Water-Resources Program Fiscal Year 1993

The Federal-State Cooperative Program is a part- nership between the U.S. Geological Survey and State and local agencies. It provides a balanced approach to the study and resolution of water- related problems and to acquiring hydrologic data. The principal program objectives are to: (1) collect, on a systematic basis, data needed for the continuing determination and evaluation of the quantity, quality, and use of the Nation's water resources, and (2) appraise the availa- bility and the physical, chemical, and biological characteristics of surface and ground water through analytical and interpretive investi- gations. During fiscal year 1993, hydrologic data collection, interpretive investigations, and research were conducted by Geological Survey personnel in offices in every State, Puerto Rico, and in several territories in cooperation with about 1,100 local, State, and regional agencies. In fiscal year 1993, Federal funding of $63.5 million was matched by cooperating agencies, which also provided almost $23 million unmatched for a total program of about $150 million. This amounted to nearly 40 percent of the total funds for Geological Survey water- resources activities. This report presents examples of current (1993) investigations. It also provides updated information on Cooperative Program investigations related to agricultural activities.

Open-File Report↗
USGS1995

U.S. Geological Survey Federal-State Cooperative Water-Resources Program fiscal year 1994

The Federal-State Cooperative Program is a major U.S. Geological Survey (USGS) activity for the collection, analysis, and reporting of information on the quantity, quality, and use of the Nation's water resources. The fundamental characteristic of the program is that most of the work is undertaken by the USGS through joint-funding agreements, with State, regional, and local agencies providing at least one-half the funds. The main objectives of the program are (1) to collect, on a systematic basis, data needed for the continuing determination and evaluation of the quantity, quality, and use of the Nation's water resources; and (2) to appraise the availability and the physical, chemical, and biological characteristics of surface and ground water through data analysis and interpretive water-resources investigations and research. During fiscal year (FY)1994, Cooperative Program activities were underway in offices in every State, Puerto Rico, and several territories in concert with about 1,100 cooperating agencies. In FY 1994, Federal funding of $63.5 million was matched by cooperating agencies, which also provided more than $25 million unmatched for a total program of about $152 million. This amounted to nearly 40 percent of the total funds for the USGS's water-resources activities. This report presents examples of FY 1994 investigations, as well as updated information on hydrologic data collection activities.

Open-File Report↗
USGS2019

Updating estimates of low-streamflow statistics to account for possible trends

Accurate estimators of streamflow statistics are critical to the design, planning, and management of water resources. Given increasing evidence of trends in low-streamflow, new approaches to estimating low-streamflow statistics are needed. Here we investigate simple approaches to select a recent subset of the low-flow record to update the commonly used statistic of 7 Q 10, the annual minimum 7-day streamflow exceeded in 9 out of 10 years on average. Informed by low-streamflow records at 174 US Geological Survey streamgages, Monte Carlo simulation experiments evaluate competing approaches. We find that a strategy which estimates 7 Q 10 using the most recent 30 years of record when a trend is detected, reduces error and bias in 7 Q 10 estimators compared to use of the full record. This simple rule-based approach has potential as the basis for a framework for updating frequency-based statistics in the context of possible trends.

Hydrologic Sciences Journal↗
USGS2017

Brackish groundwater and its potential to augment freshwater supplies

Secure, reliable, and sustainable water resources are fundamental to the Nation’s food production, energy independence, and ecological and human health and well-being. Indications are that at any given time, water resources are under stress in selected parts of the country. The large-scale development of groundwater resources has caused declines in the amount of groundwater in storage and declines in discharges to surface water bodies (Reilly and others, 2008). Water supply in some regions, particularly in arid and semiarid regions, is not adequate to meet demand, and severe drought intensifies the stresses affecting water resources (National Drought Mitigation Center, the U.S. Department of Agriculture, and the National Oceanic and Atmospheric Association, 2015). If these drought conditions continue, water shortages could adversely affect the human condition and threaten environmental flows necessary to maintain ecosystem health. In support of the national census of water resources, the U.S. Geological Survey (USGS) completed the national brackish groundwater assessment to provide updated information about brackish groundwater as a potential resource to augment or replace freshwater supplies (Stanton and others, 2017). Study objectives were to consolidate available data into a comprehensive database of brackish groundwater resources in the United States and to produce a summary report highlighting the distribution, physical and chemical characteristics, and use of brackish groundwater resources. This assessment was authorized by section 9507 of the Omnibus Public Land Management Act of 2009 (42 U.S.C. 10367), passed by Congress in March 2009. Before this assessment, the last national brackish groundwater compilation was completed in the mid-1960s (Feth, 1965). Since that time, substantially more hydrologic and geochemical data have been collected and now can be used to improve the understanding of the Nation’s brackish groundwater resources.

Fact Sheet↗
USGS2015

Assessment of aquifer properties, evapotranspiration, and the effects of ditching in the Stoney Brook watershed, Fond du Lac Reservation, Minnesota, 2006-9

The U.S. Geological Survey, in cooperation with the Fond du Lac Band of Lake Superior Chippewa, assessed hydraulic properties of geologic material, recharge, and evapotranspiration, and the effects of ditching on the groundwater resources in the Stoney Brook watershed in the Fond du Lac Reservation. Geologic, groundwater, and surface-water data were collected during 2006–9 to estimate hydrologic properties in the watershed. Streamflow and groundwater levels in the shallow glacial deposits in the Stoney Brook watershed were analyzed to estimate groundwater-flow directions, groundwater recharge, and evapotranspiration within the watershed and to assess the effect of ditches on surrounding groundwater resources. Groundwater, streamflow, and precipitation data collected during the study (2006–9) can be used to update the U.S. Department of Agriculture’s Natural Resource Conservation Service and Fond du Lac Resource Management Division surface-water models, which are used to evaluate the effect of proposed adjustments to the ditching system on streamflow on wild rice production and aquatic habitats. Specific yields calculated from the well water levels ranged from 0.11 to 0.40, and hydraulic conductivities determined from water levels measured during well slug tests ranged from 1 to 7 feet per day. The values for specific yields were similar to values obtained in other studies done in glacial materials of similar composition in Minnesota. The higher hydraulic conductivity estimate (7 feet per day) was similar to lower hydraulic conductivities estimated in another hydrologic study conducted in Carlton County, Minnesota. The installation of drainage ditches in the Stoney Brook watershed has reduced water levels in lakes connected to the ditch system, and has locally reduced groundwater levels in shallow groundwater adjacent to the ditches and lakes. Differences in near-ditch groundwater hydrographs relative to far-ditch groundwater hydrographs indicate that the effect of the ditches on groundwater is only localized to near-ditch areas. These hydrograph differences resulted in large differences between recharge estimated at wells near and far from ditches. In this study, recharge estimated at wells within 50 feet of a ditch was influenced by ditch-water levels. Annual groundwater recharge estimates from water levels and streamflows during 2006–9 ranged from 0.36 to 34.8 inches, and varied with climate, geology, and well location relative to ditches. The higher recharge estimates were determined from analysis of groundwater levels in wells near the ditches because the shallow groundwater in these wells received both infiltration from ditches and areal groundwater recharge from precipitation. The water-table fluctuation method using a manual groundwater recession approach for wells far from ditches provided the best estimates of areal groundwater recharge to the shallow glacial aquifer because water levels in these wells were not affected by water infiltrating from ditches (bank storage). For wells more than 400 feet from ditches, mean annual areal groundwater recharge estimates using the manual groundwater recession approach for wells screened mostly in outwash sands during 2007, 2008, and 2009 ranged from 4.47 to 18.6 inches (wells 5, 7, 13, 14 and 15), and ranged from 0.43 to 2.85 inches for wells screened mostly in clayey sand or sandy clay (wells 9 and 16). Recharge estimates at wells far from ditches were similar to basinwide recharge estimates from streamflow. Daily fluctuations in water levels in two wells indicated that the evapotranspiration extinction depth in the Stoney Brook watershed is approximately 4.6 to 6 feet below the land surface. A polynomial regression fit of the daily evapotranspiration rates during 2006–9 for well 1 produced a total evapotranspiration estimate of 16.1 inches from June 26 to October 6 for every year. Evapotranspiration estimated from daily water-level fluctuations in wells near ditches is relatively high. The ditch-water surface allowed for relatively high evaporation compared to the land surface, which, with a good hydraulic connection to surrounding groundwater, resulted in relatively high fluctuations in daily groundwater levels near ditches, resulting in high evapotranspiration estimates.

Minnesota↗
USGS1965

Reevaluation of the ground-water resources of Tooele Valley, Utah

This study of the geohydrology of Tooele Valley, Utah, was made by the U.S. Geological Survey in cooperation with the Utah State Engineer during the period 1958-63. The purpose of the study was to update an earlier investigation of ground water in Tooele Valley made by the Geological Survey during 1940-42 (Thomas, 1946). The construction of approximately 256 wells in the valley since 1940, many of which are large-diameter pumped wells drilled since 1950, made available new data on water levels, well discharge, and chemical quality for interpretation of ground-water conditions. New data also were available on spring discharge, streamflow, aquifer characteristics, and geologic, geophysical, and climatic conditions. The earlier report by Thomas (1946) was freely used during the preparation of this report.

Utah↗
USGS2019

A revised continuous surface elevation model for modeling

A digital elevation model (DEM) is an essential component of any hydrodynamic model. The Delta Modeling Section (Section) has maintained a database of bathymetry soundings and levee surveys for decades and published a 10-meter (10m) DEM for the San Francisco Bay and Sacramento-San Joaquin Delta (Delta) (California Department of Water Resources 2012). In collaboration with the U.S. Geological Survey (USGS) Pacific Coastal and Marine Science Center, the California Department of Water Resources (DWR) has continued to upgrade these DEMs based on newer survey data and improved interpolation methodologies. An updated San Francisco Bay-Delta bathymetric/topographic digital elevation model was published by the USGS (Fregoso, Wang, Ateljevich, and Jaffe 2017). Both DWR and USGS continue to work on the elevation models for several reasons. First, high-resolution multibeam bathymetry data continues to become available. A good portion of the newer collections are performed at locations where bathymetry data is lacking, or of poor quality, or where model sensitivity to bathymetry is known to be high, so the effort has a high return on investment. Recent high-resolution multibeam datasets easily support the development of accurate 2-meter (2m) DEMs, although shallow water, turbidity, vegetation, and the gap between the multibeam data and terrestrial data from light detection and ranging (LiDAR) remain vexing issues that fuel development of enhanced techniques. In some locations, migration toward 2m resolution models is motivated by geographical structure even where there has been little improvement in the underlying data. DEMs at 10m resolution are insufficient to adequately describe small-scale terrain features, such as levee crests or the main conveyance channel through a narrow reach, such as Middle River. As a result, elevation modelers have traditionally needed to perform feature enforcement for 10m DEMs, but not for the Section’s 2m DEMs which do resolve these features (California Department of Resources 2012). There are several other problems associated with a coarse target resolution, including reduced conveyance and rough contours where channels run oblique to the elevation model. In places where the topography demands a finer elevation model, the Section and others have adopted improved interpolation techniques for single-beam data to produce reasonable 2m DEMs that preserve features on appropriate scales.

California↗
USGS2020

Statistical methods in water resources

This text began as a collection of class notes for a course on applied statistical methods for hydrologists taught at the U.S. Geological Survey (USGS) National Training Center. Course material was formalized and organized into a textbook, first published in 1992 by Elsevier as part of their Studies in Environmental Science series. In 2002, the work was made available online as a USGS report. The text has now been updated as a USGS Techniques and Methods Report. It is intended to be a text in applied statistics for hydrology, environmental science, environmental engineering, geology, or biology that addresses distinctive features of environmental data. For example, water resources data tend to have many variables with a lower bound of zero, tend to be more skewed than data from many other disciplines, commonly contain censored data (less than values), and assumptions that the data are normally distributed are not appropriate. Computer-intensive methods (bootstrapping and permutation tests) now improve upon and replace the dependence on t-intervals, t-tests, and analysis of variance. A new chapter on sampling design addresses questions such as “How many observations do I need?” The chapter also presents distribution-free methods to help plan sampling efforts. The trends chapter has been updated to include the WRTDS (Weighted Regressions on Time, Discharge, and Season) method for analysis of water-quality data. This new version contains updated graphics and updated guidance on the use of statistical techniques. The text utilizes R, a programming language and open-source software environment, for all exercises and most graphics, and the R code used to generate figures and examples is provided for download.

Techniques and Methods↗
USGS2004

Simulation of ground-water flow in the Vevay Township area, Ingham County, Michigan

Ground water is the primary source of water for domestic, public-supply, and industrial use within the Tri-County region that includes Clinton, Eaton, and Ingham Counties in Michigan. Because of the importance of this ground-water resource, numerous communities, including the city of Mason in Ingham County, have begun local Wellhead Protection Programs. In these programs, communities protect their groundwater resource by identifying the areas that contribute water to production wells and potential sources of contamination, and by developing methods to manage and minimize threats to the water supply. In addition, some communities in Michigan are concerned about water availability, particularly in areas experiencing water-level declines in the vicinity of quarry dewatering operations. In areas where Wellhead Protection Programs are implemented and there are potential threats to the water supply, residents and communities need adequate information to protect the water supply. In 1996, a regional ground-water-flow model was developed by the U.S. Geological Survey to simulate ground-water flow in Clinton, Eaton, and Ingham Counties. This model was developed primarily to simulate the bedrock ground-waterflow system; ground-water flow in the unconsolidated glacial sediments was simulated to support analysis of flow in the underlying bedrock Saginaw aquifer. Since its development in 1996, regional model simulations have been conducted to address protection concerns and water availability questions of local water-resources managers. As a result of these continuing model simulations, additional hydrogeologic data have been acquired in the Tri-County region that has improved the characterization of the simulated ground-water-flow system and improved the model calibration. A major benefit of these updates and refinements is that the regional Tri-County model continues to be a useful tool that improves the understanding of the ground-water-flow system in the Tri-County region, provides local water-resources managers with a means to answer ground-water protection and availability questions, and serves as an example that can be applied in other areas of the state. A refined version of the 1996 Tri-County regional ground-water-flow model, developed in 1997, was modified with local hydrogeologic information in the Vevay Township area in Michigan. This model, updated in 2003 for this study, was used to simulate ground-water flow to address groundwater protection and availability questions in Vevay Township. The 2003 model included refinement of glacial and bedrock hydraulic characteristics, better representation of the degree of connection between the glacial deposits and the underlying Saginaw aquifer, and refinement of the model cell size. The 2003 model was used to simulate regional groundwater flow, to delineate areas contributing recharge and zones of contribution to production wells in the city of Mason, and to simulate the effects of present and possible future withdrawals. The areal extent of the 10- and 40-year areas contributing recharge and the zones of contribution for the city of Mason's production wells encompass about 2.3 and 6.2 square miles, respectively. Simulation results, where withdrawals for quarry operations were represented by one well pumping at 1.6 million gallons per day, indicate that water levels would decline slightly over 1 foot approximately 2 miles from the quarry in the glacial deposits and in the Saginaw aquifer. With a reduction of the local riverbed conductance or removal of local river model cells representing Mud Creek, water-level declines would extend further west of Mud Creek and further to the north, east, and south of the simulated quarry. Simulation results indicate that water withdrawn for quarry dewatering operations would decrease ground-water recharge to nearby Mud Creek, would increase ground-water discharge from Mud Creek, and that local water levels would be lowered as a result.

Michigan↗
USGS1980

Geohydrology of southwestern Kansas

Southwestern Kansas is one of the principal areas of ground-water development for irrigation in the State, and many reports are available concerning ground-water conditions in the area. The purposes of this investigation were to consolidate and update data, to determine the extent and effects of irrigation development on the ground-water resource, to determine the chemical quality of the ground water in relation to irrigation use, to describe the general operation of the hydrologic system, and to identify problem areas where intensive quantitative studies will be needed by State and local agencies for planning and management of the resource. This study began in 1972 as part of a cooperative program of ground-water investigations between the Kansas Geological Survey and the U.S. Geological Survey. Support in this study was provided by the Division of Water Resources of the Kansas State Board of Agriculture and the Division of Environment of the Kansas Department of Health and Environment.

Kansas↗
USGS1984

Analysis of the effects of proposed pumping from the principal artesian aquifer, Savannah, Georgia area

A two-dimensional finite-difference model of the principal artesian aquifer in the Savannah, Georgia, area, originally developed by Counts and Krause (1976), has been expanded and refined. The model was updated and the grid redesigned to provide more current and accurate detail for ground-water resources management alternatives. Improvements in the definition of the flow system were made possible by the acquisition of additional data in the area and by recently completed regional models that include the area. The model was initially calibrated by using the estimated predevelopment potentiometric surface of 1880. The flow system under predevelopment conditions was sluggish and only 100 cubic feet per second (65 million gallons per day) flowed through the model area. It was then tested for acceptance by using the May 1980 potentiometric surface and corresponding pumping stress of approximately 85 million gallons per day in the Savannah, Georgia-Hilton Head Island, South Carolina, area. The flow through the system under 1980 conditions was about 390 cubic feet per second (250 million gallons per day) and the vertical inflow from the overlying surficial aquifer more than doubled due to formerly rejected recharge that now flows vertically into the aquifer. Calibration was accurate + or - 10 feet. The absolute error per node was 3.4 feet. A hypothetical 25-percent increase in pumpage over the entire area was used to represent a gradual growth in commercial and municipal pumpage over the next 20 to 30 years. The increase produced a maximum decline of 30 feet below the existing water level of 135 feet below sea level at the center of the cone of depression in Savannah, and a 5-foot decline at a radius of 20 miles from the center of the cone of depression. (USGS)

Georgia↗