Search USGS⌕ Search

SEARCH · Search USGS

Results for “Series in Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
USGS2014

Spectroscopic remote sensing of plant stress at leaf and canopy levels using the chlorophyll 680 nm absorption feature with continuum removal

This paper explores the use of spectral feature analysis to detect plant stress in visible/near infrared wavelengths. A time series of close range leaf and canopy reflectance data of two plant species grown in hydrocarbon-contaminated soil was acquired with a portable spectrometer. The ProSpecTIR-VS airborne imaging spectrometer was used to obtain far range hyperspectral remote sensing data over the field experiment. Parameters describing the chlorophyll 680 nm absorption feature (depth, width, and area) were derived using continuum removal applied to the spectra. A new index, the Plant Stress Detection Index (PSDI), was calculated using continuum-removed values near the chlorophyll feature centre (680 nm) and on the green-edge (560 and 575 nm). Chlorophyll feature’s depth, width and area, the PSDI and a narrow-band normalised difference vegetation index were evaluated for their ability to detect stressed plants. The objective was to analyse how the parameters/indices were affected by increasing degrees of plant stress and to examine their utility as plant stress indicators at the remote sensing level (e.g. airborne sensor). For leaf data, PSDI and the chlorophyll feature area revealed the highest percentage (67–70%) of stressed plants. The PSDI also proved to be the best constraint for detecting the stress in hydrocarbon-impacted plants with field canopy spectra and airborne imaging spectroscopy data. This was particularly true using thresholds based on the ASD canopy data and considering the combination of higher percentage of stressed plants detected (across the thresholds) and fewer false-positives.

Paulinia↗
USGS2016

Spatially explicit rangeland erosion monitoring using high-resolution digital aerial imagery

Nearly all of the ecosystem services supported by rangelands, including production of livestock forage, carbon sequestration, and provisioning of clean water, are negatively impacted by soil erosion. Accordingly, monitoring the severity, spatial extent, and rate of soil erosion is essential for long-term sustainable management. Traditional field-based methods of monitoring erosion (sediment traps, erosion pins, and bridges) can be labor intensive and therefore are generally limited in spatial intensity and/or extent. There is a growing effort to monitor natural resources at broad scales, which is driving the need for new soil erosion monitoring tools. One remote-sensing technique that can be used to monitor soil movement is a time series of digital elevation models (DEMs) created using aerial photogrammetry methods. By geographically coregistering the DEMs and subtracting one surface from the other, an estimate of soil elevation change can be created. Such analysis enables spatially explicit quantification and visualization of net soil movement including erosion, deposition, and redistribution. We constructed DEMs (12-cm ground sampling distance) on the basis of aerial photography immediately before and 1 year after a vegetation removal treatment on a 31-ha Piñon-Juniper woodland in southeastern Utah to evaluate the use of aerial photography in detecting soil surface change. On average, we were able to detect surface elevation change of ± 8−9cm and greater, which was sufficient for the large amount of soil movement exhibited on the study area. Detecting more subtle soil erosion could be achieved using the same technique with higher-resolution imagery from lower-flying aircraft such as unmanned aerial vehicles. DEM differencing and process-focused field methods provided complementary information and a more complete assessment of soil loss and movement than any single technique alone. Photogrammetric DEM differencing could be used as a technique to quantitatively monitor surface change over time relative to management activities.

Utah↗
USGS2017

Prediction of forest canopy and surface fuels from Lidar and satellite time series data in a bark beetle-affected forest

Wildfire behavior depends on the type, quantity, and condition of fuels, and the effect that bark beetle outbreaks have on fuels is a topic of current research and debate. Remote sensing can provide estimates of fuels across landscapes, although few studies have estimated surface fuels from remote sensing data. Here we predicted and mapped field-measured canopy and surface fuels from light detection and ranging (lidar) and Landsat time series explanatory variables via random forest (RF) modeling across a coniferous montane forest in Colorado, USA, which was affected by mountain pine beetles ( Dendroctonus ponderosae Hopkins) approximately six years prior. We examined relationships between mapped fuels and the severity of tree mortality with correlation tests. RF models explained 59%, 48%, 35%, and 70% of the variation in available canopy fuel, canopy bulk density, canopy base height, and canopy height, respectively (percent root-mean-square error (%RMSE) = 12–54%). Surface fuels were predicted less accurately, with models explaining 24%, 28%, 32%, and 30% of the variation in litter and duff, 1 to 100-h, 1000-h, and total surface fuels, respectively (%RMSE = 37–98%). Fuel metrics were negatively correlated with the severity of tree mortality, except canopy base height, which increased with greater tree mortality. Our results showed how bark beetle-caused tree mortality significantly reduced canopy fuels in our study area. We demonstrated that lidar and Landsat time series data contain substantial information about canopy and surface fuels and can be used for large-scale efforts to monitor and map fuel loads for fire behavior modeling at a landscape scale.

Colorado↗
USGS2017

How similar are forest disturbance maps derived from different Landsat time series algorithms?

Disturbance is a critical ecological process in forested systems, and disturbance maps are important for understanding forest dynamics. Landsat data are a key remote sensing dataset for monitoring forest disturbance and there recently has been major growth in the development of disturbance mapping algorithms. Many of these algorithms take advantage of the high temporal data volume to mine subtle signals in Landsat time series, but as those signals become subtler, they are more likely to be mixed with noise in Landsat data. This study examines the similarity among seven different algorithms in their ability to map the full range of magnitudes of forest disturbance over six different Landsat scenes distributed across the conterminous US. The maps agreed very well in terms of the amount of undisturbed forest over time; however, for the ~30% of forest mapped as disturbed in a given year by at least one algorithm, there was little agreement about which pixels were affected. Algorithms that targeted higher-magnitude disturbances exhibited higher omission errors but lower commission errors than those targeting a broader range of disturbance magnitudes. These results suggest that a user of any given forest disturbance map should understand the map’s strengths and weaknesses (in terms of omission and commission error rates), with respect to the disturbance targets of interest.

Forests↗
USGS2008

Modeling and dynamic monitoring of ecosystem performance in the Yukon River Basin

Central Alaska is ecologically sensitive and experiencing stress in response to marked regional warming. Resource managers would benefit from an improved ability to monitor ecosystem processes in response to climate change, fire, insect damage, and management policies and to predict responses to future climate scenarios. We have developed a method for analyzing ecosystem performance as represented by the growing season integral of normalized difference vegetation index (NDVI), which is a measure of greenness that can be interpreted in terms of plant growth or photosynthetic activity (gross primary productivity). The approach illustrates the status and trends of ecosystem changes and separates the influences of climate and local site conditions from the influences of disturbances and land management. We emphasize the ability to quantify ecosystem processes, not simply changes in land cover, across the entire period of the remote sensing archive (Wylie and others, 2008). The method builds upon remotely sensed measures of vegetation greenness for each growing season. By itself, however, a time series of greenness often reflects annual climate variations in temperature and precipitation. Our method seeks to remove the influence of climate so that changes in underlying ecological conditions are identified and quantified. We define an "expected ecosystem performance" to represent the greenness response expected in a particular year given the climate of that year. We distinguish "performance anomalies" as cases where the ecosystem response is significantly different from the expected ecosystem performance. Maps of the performance anomalies (fig. 1) and trends in the anomalies give valuable information on the ecosystems for land managers and policy makers at a resolution of 1 km to 250 m.

Fact Sheet↗
USGS2018

Mapping forest change using stacked generalization: An ensemble approach

The ever-increasing volume and accessibility of remote sensing data has spawned many alternative approaches for mapping important environmental features and processes. For example, there are several viable but highly varied strategies for using time series of Landsat imagery to detect changes in forest cover. Performance among algorithms varies across complex natural systems, and it is reasonable to ask if aggregating the strengths of an ensemble of classifiers might result in increased overall accuracy. Relatively simple rules have been used in the past to aggregate classifications among remotely sensed maps (e.g. using majority predictions), and in other fields, empirical models have been used to create situationally specific algorithm weights. The latter process, called “stacked generalization” (or “stacking”), typically uses a parametric model for the fusion of algorithm outputs. We tested the performance of several leading forest disturbance detection algorithms against ensembles of the outputs of those same algorithms based upon stacking using both parametric and Random Forests-based fusion rules. Stacking using a Random Forests model cut omission and commission error rates in half in many cases in relation to individual change detection algorithms, and cut error rates by one quarter compared to more conventional parametric stacking. Stacking also offers two auxiliary benefits: alignment of outputs to the precise definitions built into a particular set of empirical calibration data; and, outputs which may be adjusted such that map class totals match independent estimates of change in each year. In general, ensemble predictions improve when new inputs are added that are both informative and uncorrelated with existing ensemble components. As increased use of cloud-based computing makes ensemble mapping methods more accessible, the most useful new algorithms may be those that specialize in providing spectral, temporal, or thematic information not already available through members of existing ensembles.

Remote Sensing of Environment↗
USGS2019

Validating a time series of annual grass percent cover in the sagebrush ecosystem

We mapped yearly (2000–2016) estimates of annual grass percent cover for much of the sagebrush ecosystem of the western United States using remotely sensed, climate, and geophysical data in regression-tree models. Annual grasses senesce and cure by early summer and then become beds of fine fuel that easily ignite and spread fire through rangeland systems. Our annual maps estimate the extent of these fuels and can serve as a tool to assist land managers and scientists in understanding the ecosystem’s response to weather variations, disturbances, and management. Validating the time series of annual maps is important for determining the usefulness of the data. To validate these maps, we compare Bureau of Land Management Assessment Inventory and Monitoring (AIM) data to mapped estimates and use a leave-one-out spatial assessment technique that is effective for validating maps that cover broad geographical extents. We hypothesize that the time series of annual maps exhibits high spatiotemporal variability because precipitation is highly variable in arid and semiarid environments where sagebrush is native, and invasive annual grasses respond to precipitation. The remotely sensed data that help drive our regression-tree model effectively measures annual grasses’ response to precipitation. The mean absolute error (MAE) rate varied depending on the validation data and technique used for comparison. The AIM plot data and our maps had substantial spatial incongruence, but despite this, the MAE rate for the assessment equaled 12.62%. The leave-one-out accuracy assessment had an MAE of 8.43%. We quantified bias, and bias was more substantial at higher percent cover. These annual maps can help management identify actions that may alleviate the current cycle of invasive grasses because it enables the assessment of the variability of annual grass − percent cover distribution through space and time, as part of dynamic systems rather than static systems.

Rangeland Ecology and Management↗
USGS1974

Shore zone land use and land cover: Central Atlantic Regional Ecological Test Site

Anderson's 1972 United States Geological Survey classification in modified form was applied to the barrier-island coastline within the CARETS region. High-altitude, color-infrared photography of December, 1972, and January, 1973, served as the primary data base in this study. The CARETS shore zone studied was divided into six distinct geographical regions; area percentages for each class in the modified Anderson classification are presented. Similarities and differences between regions are discussed within the framework of man's modification of these landscapes. The results of this study are presented as a series of 19 maps of land-use categories. Recommendations are made for a remote-sensing system for monitoring the CARETS shore zone within the context of the dynamics of the landscapes studied.

Natural Resources Report↗
USGS2000

Estimation of wave phase speed and nearshore bathymetry from video imagery

A new remote sensing technique based on video image processing has been developed for the estimation of nearshore bathymetry. The shoreward propagation of waves is measured using pixel intensity time series collected at a cross-shore array of locations using remotely operated video cameras. The incident band is identified, and the cross-spectral matrix is calculated for this band. The cross-shore component of wavenumber is found as the gradient in phase of the first complex empirical orthogonal function of this matrix. Water depth is then inferred from linear wave theory's dispersion relationship. Full bathymetry maps may be measured by collecting data in a large array composed of both cross-shore and longshore lines. Data are collected hourly throughout the day, and a stable, daily estimate of bathymetry is calculated from the median of the hourly estimates. The technique was tested using 30 days of hourly data collected at the SandyDuck experiment in Duck, North Carolina, in October 1997. Errors calculated as the difference between estimated depth and ground truth data show a mean bias of −35 cm (rms error = 91 cm). Expressed as a fraction of the true water depth, the mean percent error was 13% (rms error = 34%). Excluding the region of known wave nonlinearities over the bar crest, the accuracy of the technique improved, and the mean (rms) error was −20 cm (75 cm). Additionally, under low-amplitude swells (wave height H ≤ 1 m), the performance of the technique across the entire profile improved to 6% (29%) of the true water depth with a mean (rms) error of −12 cm (71 cm).

North Carolina↗
USGS2019

Remote sensing as the foundation for high-resolution United States landscape projections – The Land Change Monitoring, assessment, and projection (LCMAP) initiative

The Land Change Monitoring, Assessment, and Projection (LCMAP) initiative uses temporally dense Landsat data and time series analyses to characterize landscape change in the United States from 1985 to present. LCMAP will be used to explain how past, present, and future landscape change affects society and natural systems. Here, we describe a modeling framework for producing high-resolution (spatial and thematic) landscape projections at a national scale, using a unique parcel-based modeling framework. The methodology was tested by modeling 11 land use scenarios and 3 climate realizations for the U.S. Great Plains. Results demonstrate 1) an ability to balance competing land-use demands from quite variable, complex scenarios, 2) urban growth that matches theoretical future patterns, 3) the value of remote sensing data sources for model parameterization and for deriving landscape parcels, and 4) a pragmatic approach that facilitates the development of high thematic- and spatial-resolution projections at a national scale.

Environmental Modelling and Software↗
USGS2008

Ocean wavenumber estimation from wave-resolving time series imagery

We review several approaches that have been used to estimate ocean surface gravity wavenumbers from wave-resolving remotely sensed image sequences. Two fundamentally different approaches that utilize these data exist. A power spectral density approach identifies wavenumbers where image intensity variance is maximized. Alternatively, a cross-spectral correlation approach identifies wavenumbers where intensity coherence is maximized. We develop a solution to the latter approach based on a tomographic analysis that utilizes a nonlinear inverse method. The solution is tolerant to noise and other forms of sampling deficiency and can be applied to arbitrary sampling patterns, as well as to full-frame imagery. The solution includes error predictions that can be used for data retrieval quality control and for evaluating sample designs. A quantitative analysis of the intrinsic resolution of the method indicates that the cross-spectral correlation fitting improves resolution by a factor of about ten times as compared to the power spectral density fitting approach. The resolution analysis also provides a rule of thumb for nearshore bathymetry retrievals-short-scale cross-shore patterns may be resolved if they are about ten times longer than the average water depth over the pattern. This guidance can be applied to sample design to constrain both the sensor array (image resolution) and the analysis array (tomographic resolution). ?? 2008 IEEE.

IEEE Transactions on Geoscience and Remote Sensing↗
USGS2017

Remote measurement of river discharge using thermal particle image velocimetry (PIV) and various sources of bathymetric information

Although river discharge is a fundamental hydrologic quantity, conventional methods of streamgaging are impractical, expensive, and potentially dangerous in remote locations. This study evaluated the potential for measuring discharge via various forms of remote sensing, primarily thermal imaging of flow velocities but also spectrally-based depth retrieval from passive optical image data. We acquired thermal image time series from bridges spanning five streams in Alaska and observed strong agreement between velocities measured in situ and those inferred by Particle Image Velocimetry (PIV), which quantified advection of thermal features by the flow. The resulting surface velocities were converted to depth-averaged velocities by applying site-specific, calibrated velocity indices. Field spectra from three clear-flowing streams provided strong relationships between depth and reflectance, suggesting that, under favorable conditions, spectrally-based bathymetric mapping could complement thermal PIV in a hybrid approach to remote sensing of river discharge; this strategy would not be applicable to larger, more turbid rivers, however. A more flexible and efficient alternative might involve inferring depth from thermal data based on relationships between depth and integral length scales of turbulent fluctuations in temperature, captured as variations in image brightness. We observed moderately strong correlations for a site-aggregated data set that reduced station-to-station variability but encompassed a broad range of depths. Discharges calculated using thermal PIV-derived velocities were within 15% of in situ measurements when combined with depths measured directly in the field or estimated from field spectra and within 40% when the depth information also was derived from thermal images. The results of this initial, proof-of-concept investigation suggest that remote sensing techniques could facilitate measurement of river discharge.

Journal of Hydrology↗
USGS2022

Satellite remote sensing of crop water use across the Missouri River Basin for 1986–2018 period

Understanding historical crop water use (CWU) dynamics is important to improve land and water management. In this study, well-validated (coefficient of determination = 0.91, percent bias = 4%, and percent root mean square error = 11.8%) Landsat-based actual evapotranspiration (ETa) time-series estimations were used to (1) assess summer season CWU (CWU-Su) dynamics, (2) investigate CWU-Su trends over the study period (1986–2018; 33 years) at the regional- and pixel-scales, and (3) attribute CWU-Su driving factors across Missouri River Basin. Spatial variability of the ETa estimations along with the observed bimodal probability density distribution of ETa highlighted a strong relation between land cover and water uses across the basin. The bimodal distribution of ETa also indicated the presence of two major landcovers in the basin. The drier foothill regions in northwestern Missouri River Basin, dominated by grassland/shrubland, showed lower ETa (< 500 mm/year), whereas cropland dominated regions in lower semi-humid basin and forested subbasins exhibited higher ETa (> 600 mm/year). The CWU-Su anomalies revealed the vulnerability of the basin to year-to-year weather conditions. The CWU-Su trend analysis revealed a significant positive trend (p < 0.1) at the regional-scale affecting 30% of basin’s cropland pixels. The cropland pixels under positive CWU-Su trend were found to be clustered in the eastern and central Missouri River Basin as a result of the combined effect of increased crop production area, increased crop yields, crop practice shifts to higher biomass crops, and increased irrigated land. The effect of improved irrigation and water management practices on reducing CWU-Su was observed in western Missouri River Basin, which had a stable major crop throughout the study period. Overall, the study highlights the usefulness of Landsat imagery and remote sensing-based ETa modeling approaches in generating historical time-series ETa maps over a wide range of elevation, vegetation, and climate.

Missouri River Basin↗
USGS2010

The Martian surface

The past four years have been particularly fruitful for Martian research as the enormous volumes of data collected during the Viking mission became readily available to the general science community, and as reformatting of the remote sensing data into cartographic products made the data more useable. The 1:5,000,000‐scale map series is complete, and 1:2,000,000‐scale controlled mosaics of the entire planet are nearing completion. In addition 1:500,000‐scale mosaics have been prepared of about thirty local areas. A uniform scale, digital imaging data base is in preparation (Batson, 1986), and the infrared data have been reformatted to make it more accessible to the general user (Martin and Kieffer, 1985).

Reviews of Geophysics↗
USGS2022

River bathymetry retrieval from Landsat-9 images based on neural networks and comparison to SuperDove and Sentinel-2

The Landsat mission has kept an eye on our planet, including water bodies, for 50 years. With the launch of Landsat-9 and its onboard Operational Land Imager 2 (OLI-2) in September 2021, more subtle variations in brightness (14-bit dynamic range) can be captured than previous sensors in the Landsat series (e.g., 12-bit Landsat-8). The enhanced radiometric resolution of OLI-2 appeals to the aquatic remote sensing community because the instrument might be capable of resolving smaller differences in water-leaving radiance. This study evaluates the potential to map river bathymetry from Landsat-9 imagery. We employ a neural network (NN)-based regression model for bathymetry retrieval and compare the results with optimal band ratio analysis (OBRA). The effect of Landsat-9 pan-sharpening on depth retrieval is also examined. In addition, we perform an intersensor comparison with Sentinel-2 and newly available 8-band SuperDoves from the PlanetScope constellation. Depth retrieval results from the Colorado and Potomac Rivers imply that Landsat-9 provided more accurate bathymetry across a range of depths up to 20 m, particularly when pan-sharpened. Downsampling the SuperDove data improved bathymetry retrieval due to enhanced signal-to-noise ratio, most notably in deep waters (maximum detectable depth increased from ∼15 to ∼20 m). Similarly, the enhanced spectral resolution of 8-band SuperDoves improved depth retrieval relative to 4-band Doves. The NN-based model outperformed OBRA by incorporating more spectral information.

Journal of Selected Topics in Applied Earth Observ↗
USGS2014

Mapping current and potential distribution of non-native Prosopis juliflora in the Afar region of Ethiopia

We used correlative models with species occurrence points, Moderate Resolution Imaging Spectroradiometer (MODIS) vegetation indices, and topo-climatic predictors to map the current distribution and potential habitat of invasive Prosopis juliflora in Afar, Ethiopia. Time-series of MODIS Enhanced Vegetation Indices (EVI) and Normalized Difference Vegetation Indices (NDVI) with 250 m2 spatial resolution were selected as remote sensing predictors for mapping distributions, while WorldClim bioclimatic products and generated topographic variables from the Shuttle Radar Topography Mission product (SRTM) were used to predict potential infestations. We ran Maxent models using non-correlated variables and the 143 species-occurrence points. Maxent generated probability surfaces were converted into binary maps using the 10-percentile logistic threshold values. Performances of models were evaluated using area under the receiver-operating characteristic (ROC) curve (AUC). Our results indicate that the extent of P. juliflora invasion is approximately 3,605 km 2 in the Afar region (AUC = 0.94), while the potential habitat for future infestations is 5,024 km 2 (AUC = 0.95). Our analyses demonstrate that time-series of MODIS vegetation indices and species occurrence points can be used with Maxent modeling software to map the current distribution of P. juliflora, while topo-climatic variables are good predictors of potential habitat in Ethiopia. Our results can quantify current and future infestations, and inform management and policy decisions for containing P. juliflora . Our methods can also be replicated for managing invasive species in other East African countries.

PLoS ONE↗
USGS2025

Assessing gap-filled Landsat land surface temperature time-series data using different observational datasets

Landsat Analysis Ready Data (ARD)-based time-series present challenges in monitoring surface urban heat islands (SUHI) due to rapid changes in land surface temperature (LST) compared to cloud-free satellite observations. This research investigates the use of a spatiotemporal gap-filling model as a feasible and cost-effective solution to produce Landsat time-series LST products with both high spatial resolution and temporal frequency. The study identified and filled Landsat ARD thermal times-series data gaps due to missing data, cloud and shadow effects, and data quality. The accuracy of Landsat gap-filled products was assessed using randomly selected clear observations of Landsat and uncertainty products from the gap-filling model and was evaluated using various existing temperature datasets, including climate data from NOAA Global Historical Climate Network station observations, Daily Surface Weather and Climatological Summaries (DAYMET), and LST including MODIS, VIIRS and ECOSTRESS. The result suggests that the gap-filled Landsat LST has significant correlations with existing datasets including field observation and remote sensing data derived from other sensors that have similar monthly and seasonal variation patterns. The uncertainty maps show spatial distributions of uncertainty for gap-filled pixels that have high or low uncertainties. The Landsat gap-filled time-series datasets can be used to measure annual, seasonal, or even monthly landscape thermal conditions, which are useful for SUHI and relevant research, and to perform multi-decade time-series LST change analysis under climate change conditions.

International Journal of Remote Sensing↗
USGS2026

Quantifying post-fire live tree presence and spatial variation using Sentinel-2 time series

Accurate mapping of post-fire surviving trees is important for tracking forest recovery and prioritizing land management decisions. Satellite-based remote sensing is an effective method to assess post-fire forest conditions. Traditionally, differenced satellite-derived burn severity indices are computed by differencing one year pre- and post-fire spectral reflectance values. Differenced burn severity indices are useful for quantifying and mapping the magnitude of ecological change, but their application to detecting and mapping post-fire live trees may not be as appropriate, particularly for delayed tree mortality. Delayed tree mortality (“delayed mortality”) is a phenomenon where trees that initially survive fire then die over an extended period (between one and five years), and it can be challenging to measure and predict. In this study, we demonstrate the potential of mapping delayed mortality using readily available remotely sensed imagery alone. We used random forest models to detect post-fire live trees using 10-m resolution Sentinel-2 data at one-, three-, and five-years post-fire for four fires in the southern Sierra Nevada, California, USA. Using imagery from the National Agriculture Imagery Program (NAIP; 60-cm resolution), we manually classified live tree presence in 6000 Sentinel-2 pixels (500 pixels for each fire-year combination) to calibrate and validate models. Sentinel-2 based model accuracies ranged from 65 % to 86 % with F-scores ranging from 0.52 to 0.86, and their predictions of live pixel area were on average 44 % lower than inferred from more traditional indices such as relative differenced normalized burn ratio (RdNBR). This work represents a promising first step in using freely available post-fire spectral reflectance imagery to detect live trees over an extended period to support post-fire management.

California↗