SEARCH · Search USGS

Results for “Reviews in Economic Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

USGS2005

Marine mineral resources of Pacific Islands— A review of the Exclusive Economic Zones of islands of U.S. affiliation, excluding the State of Hawaii

The United States Exclusive Economic Zone (EEZ) was established in 1983 and comprises all marine areas within 200 nautical miles (370 kilometers) of the nearest U.S. land. This vast area of 3.38 million square nautical miles (11.6 million square kilometers) is about 20 percent greater than the entire land area of the United States. The resource potential of the vast mineral deposits that occur within the U.S. EEZ is unknown, despite field studies that have taken place during the past 25 years. Since about 1975, information on marine mineral deposits has been obtained by numerous research cruises to the Pacific Ocean by the U.S. Geological Survey (USGS), the U.S. National Oceanic and Atmospheric Administration (NOAA), equivalent government agencies in Germany, Canada, France, Russia, Japan, China, South Korea, Australia, and New Zealand, and by academic researchers from all of these nations. Although most of the cruises by other nations explored areas outside the U.S. EEZ, information gained from those studies can aid in the evaluation of the mineral potential in the U.S. EEZ. However, the global effort remains inadequate to allow for the quantitative evaluation of mineral resources contained within the EEZ of nations or within international regions of the oceans.

Circular↗

USGS2015

Dreissenid mussel research priorities workshop

Currently, dreissenid mussels have yet to be detected in the northwestern part of the United States and western Canada. Infestation of one of the jurisdictions within the mussel-free Pacific Northwest would likely have significant economic, societal and environmental implications for the entire region. Understanding the biology and environmental tolerances of dreissenid mussels, and effectiveness of various management strategies, is key to prevention. On November 4-5, 2015, the Aquatic Bioinvasion Research and Policy Institute and the Center for Lakes and Reservoirs at Portland State University, the US Geological Survey, and the Pacific States Marine Fisheries Commission, convened a Dreissenid Mussel Research Priorities Workshop funded by the Great Northern Landscape Conservation Cooperative. The purpose of the workshop was to review dreissenid research priorities in the 2010 Quagga-Zebra Mussel Action Plan for Western U.S. Waters, reassess those priorities, incorporate new information and emerging trends, and develop priorities to strategically focus research efforts on zebra and quagga mussels in the Pacific Northwest and ensure that future research is focused on the highest priorities. It is important to note that there is some repetition among dreissenid research priority categories (e.g., prevention, detection, control, monitoring, and biology). Workshop participants with research experience in dreissenid mussel biology and management were identified by a literature review. State and federal agency managers were also invited to the workshop to ensure relevancy and practicality of the workshop outcomes. A total of 28 experts (see sidebar) in mussel biology, ecology, and management attended the workshop.

Conference Paper↗

USGS2013

Procedure for calculating estimated ultimate recoveries of Bakken and Three Forks Formations horizontal wells in the Williston Basin

Estimated ultimate recoveries (EURs) are a key component in determining productivity of wells in continuous-type oil and gas reservoirs. EURs form the foundation of a well-performance-based assessment methodology initially developed by the U.S. Geological Survey (USGS; Schmoker, 1999). This methodology was formally reviewed by the American Association of Petroleum Geologists Committee on Resource Evaluation (Curtis and others, 2001). The EUR estimation methodology described in this paper was used in the 2013 USGS assessment of continuous oil resources in the Bakken and Three Forks Formations and incorporates uncertainties that would not normally be included in a basic decline-curve calculation. These uncertainties relate to (1) the mean time before failure of the entire well-production system (excluding economics), (2) the uncertainty of when (and if) a stable hyperbolic-decline profile is revealed in the production data, (3) the particular formation involved, (4) relations between initial production rates and a stable hyperbolic-decline profile, and (5) the final behavior of the decline extrapolation as production becomes more dependent on matrix storage.

North Dakota;South Dakota;Montana;Wyoming↗

USGS2010

Spatial Databases of Geological, Geophysical, and Mineral Resource Data Relevant to Sandstone-Hosted Copper Deposits in Central Kazakhstan

Central Kazakhstan is host to one of the world's giant sandstone-hosted copper deposits, the Dzhezkazgan deposit, and several similar, smaller deposits. The United Stated Geological Survey (USGS) is assessing the potential for other, undiscovered deposits of this type in the surrounding region of central Kazakhstan. As part of this effort, Syusyura compiled and partially translated an array of mostly unpublished geologic, geophysical, and mineral resource data for this region in digital format from the archives of the former Union of Soviet Socialists Republics (of which Kazakhstan was one of the member republics until its dissolution in 1991), as well as from later archives of the Republic of Kazakhstan or of the Kazakhstan consulting firm Mining Economic Consulting (MEC). These digital data are primarily map-based displays of information that were transmitted either in ESRI ArcGIS, georeferenced format, or non-georeferenced map image files. Box and Wallis reviewed all the data, translated Cyrillic text where necessary, inspected the maps for consistency, georeferenced the unprojected map images, and reorganized the data into the filename and folder structure of this publication.

Open-File Report↗

USGS2021

Economic geology and environmental characteristics of antimony deposits

Antimony is commonly listed as a critical mineral, particularly in the United States and European Union [1]. Its criticality, or supply risk, is derived from a combination of economic vulnerability, disruption potential of supply, and trade exposure [2].Disruption potential relates a country’s ability and willingness to supply a commodity. Commodities for which supply is concentrated in the fewest countries have the greatest potential for supply disruption, trade exposure, and economic vulnerability. In 2018, approximately 61% of the world production of antimony was mined from China, followed by Russia (20%) and Tajikistan (10%) [3] (Fig. 3.1). Several reviews of antimony as a critical mineral have been recently published [4, 5]. The uses of antimony can be divided into three main categories: metal products, non-metal uses, and flame retardants [5]. Most metallic antimony use is inlead-acid batteries. Antimony trioxide (Sb 2 O 3 ) combined with halogenated com-pounds is used as a fire retardant in plastics, fabrics, and other applications. Other non-metallic uses include as a catalyst for plastics, and in the glass industry. Emerging uses include data storage and novel photovoltaic cells. Recycling of batteries represents an important reuse of antimony, but other uses of antimony do not lend themselves to recycling. This chapter describes mineral deposit types that are primary sources of antimony, and environmental effects related to their mining. Antimony can be re-covered as either a primary commodity from some deposits or as a by product commodity from some gold or silver deposits. Environmental risks associated with antimony mining include those related to mining in general, such as the acid-generating potential of solid mine waste, and some issues specific to antimony, as described below.

Book chapter↗

USGS1966

Dawsonite in the green river formation of Colorado

Dawsonite NaAl(OH)2C03 is a rare mineral that occurs in relative abundance over hundreds of square miles in the Piceance Creek Basin of northwestern Colorado, as a rock-forming constituent of the oil shales in the green River Formation. In some specimens it makes up 25 percent by weight of the shale. Containing 35 percent of acid-soluble A1203, it has been viewed as a potential ore of aluminum. The dawsonite extends through 700 feet of continuous section of high-grade oil shale (averaging 25 gallons per ton), which may be as much as 1,500 feet in thickness. Its distribution, areally and stratigraphically, is reviewed; methods for its identification, and for its quantitative determination in the oil shale, with special reference to X-ray diffraction procedures are described; and the geochemistry of dawsonite, as it relates to the origin of the mineral, is considered. The scattered literature on dawsonite is briefly summarized. © 1966 Society of Economic Geologists, Inc..

Colorado↗

USGS1971

Coronadite — Modes of occurrence and origin

The lead manganate, "coronadite," was first recognized at the Coronado mine in the Morenci district, Arizona, by Lindgren in 1903. Several years later, the identity of the mineral was questioned and it was not until 1932 that Orcel recognized it in material from Morocco. Since 1955, the mineral has been recognized at numerous places; in the USSR, east of the Ural Mountains, in several districts in Morocco, England, Australia, and India. In recent years, coronadite had been identified at numerous localities in New Mexico, Arizona, Nevada, and California by the writer and others. At this time, it has been identified at 22 localities, and in the opinion of this writer, it will be found at many more places if it is sought for carefully. Author's review of the known occurrences of coronadite and interpretation of the modes of geologic environment show that the mineral is found in veins and hot spring aprons, where it seems to have been deposited by hydrothermal waters from depth and that it is one of the manganese oxide minerals deposited as sediments. Probably it is more widely found in assemblages of minerals of supergene origin.

Arizona, Asturias, California, Chihuahua, Durango,↗

USGS2006

Aqueous geochemical data from the analysis of stream water samples collected in August 2004: Taylor Mountains 1:250,000 scale quadrangle, Alaska

We report on the chemical analysis of water samples collected from the Taylor Mountains 1:250,000 quadrangle. Samples were collected as part of the multi-year U.S. Geological Survey's project -- Geologic and Mineral Deposit Data for Alaskan Economic Development. Data presented here are from water samples collected primarily in the northeastern part of the Taylor Mountains quadrangle. The data include samples taken from the Taylor Mountains C1, C2, D1, D2, and D4 1:63,360 scale quadrangles. The data are being released at this time with minimal interpretation. Site selection was based on a regional sampling strategy that focused on first and second order drainages. Water sampling site selection was based on landscape parameters that included physiography, wetland extent, lithological changes, and the cursory field review of the mineralogy from the pan concentrates. Stream water in the Taylor Mountians quadrangle is dominated by bicarbonate (HCO3-), though in a few samples more than 50% of the anionic charge can be attibuted to sulfate ( SO42-). The major-cation chemistry range from Ca/Mg dominated to a mix of Ca/Mg/Na+K. Good agreement was found between the major cation and anions in the duplicate samples. Many trace elements were at or near the method detection limit in these samples but good agreement was found between duplicate samples for elements with detectable concentrations. Major ion concentrations were below detection in all field blanks and the trace elements concentrations generally were below detection. However, Ta (range 0.9 -.1 ug/L) and Zn (1 to 3.5 ug/L) were detected in all blanks and Ba ( 0.24 ug/L) and Th (0.2 ug/L) were detected in one blank. There was good agreement between dupilicate total- and methyl- mercury and DOC samples; however, total mercury, methyl-mercury and dissolve organic carbon (DOC) were detected in the blank at 2.35 ng/L, 0.07 ng/L and 0.57 mg/L, respectively.

Alaska↗

USGS2025

Methodology and technical input for the 2025 U.S. List of Critical Minerals—Assessing the potential effects of mineral commodity supply chain disruptions on the U.S. economy

The Secretary of the Interior, acting through the Director of the U.S. Geological Survey, is tasked by section 7002 (“Mineral Security”) of title VII (“Critical Minerals”) of the Energy Act of 2020 (Public Law 116–260, December 27, 2020, 116th Congress) with reviewing and revising the methodology used to evaluate mineral commodity supply risk and the U.S. List of Critical Minerals (LCM) no less than every 3 years. Following two previous LCM assessments, this analysis represents the latest technical input for evaluating each mineral commodity’s supply risk and determining their recommended status on the LCM. We evaluated mineral commodity supply risk using two criteria: (1) an economic effects assessment that quantified the potential effects of various trade disruption scenarios on the U.S. economy, and (2) an examination of whether the mineral commodity’s U.S. supply chain relied on a sole domestic producer that represented a single point of failure. For the first criterion, postdisruption equilibrium quantities and prices for each mineral commodity were calculated based on their price elasticities of supply and demand and the availability of excess production capacity for each yearlong foreign trade disruption scenario. Subsequently, a nonlinear optimization routine was used with detailed economic input-output tables to estimate the potential economic effects on the U.S. economy of over 1,200 scenarios for 84 mineral commodities. After accounting for the probability of each scenario’s occurrence, the overall results are presented in terms of changes in U.S. gross domestic product (GDP) by individual industry and the economy overall. The results, which ranged from a net decrease in U.S. GDP of nearly $4.5 billion to a net increase of $33 million, largely reflect U.S. import dependency and world production concentration. Using the Jenks natural breaks optimization method, a statistical classification technique, we categorized the mineral commodities into several classes based on this overall risk quantification. Mineral commodities with annualized probability-weighted net decreases in U.S. GDP greater than $2 million were recommended for inclusion on the LCM. If a mineral commodity did not meet the threshold for inclusion on the LCM under the first criterion, its domestic supply chain was examined under the second criterion, which recommended a mineral commodity for inclusion on the LCM if there was only a single domestic producer. Ultimately, the two criteria resulted in the recommendation of the addition of six mineral commodities (in descending risk order, potash, silicon, copper, silver, rhenium, and lead) to and the removal of two mineral commodities (arsenic and tellurium) from the LCM. By using an economic effects assessment, the results of this analysis provide a prioritization that can also be compared directly against other risk analyses and the cost of various risk mitigation strategies.

Open-File Report↗

USGS2012

Impact-based earthquake alerts with the U.S. Geological Survey's PAGER system: what's next?

In September 2010, the USGS began publicly releasing earthquake alerts for significant earthquakes around the globe based on estimates of potential casualties and economic losses with its Prompt Assessment of Global Earthquakes for Response (PAGER) system. These estimates significantly enhanced the utility of the USGS PAGER system which had been, since 2006, providing estimated population exposures to specific shaking intensities. Quantifying earthquake impacts and communicating estimated losses (and their uncertainties) to the public, the media, humanitarian, and response communities required a new protocol—necessitating the development of an Earthquake Impact Scale—described herein and now deployed with the PAGER system. After two years of PAGER-based impact alerting, we now review operations, hazard calculations, loss models, alerting protocols, and our success rate for recent (2010-2011) events. This review prompts analyses of the strengths, limitations, opportunities, and pressures, allowing clearer definition of future research and development priorities for the PAGER system.

Conference Paper↗

USGS1968

Experimental evidence that fluid inclusions do not leak

The possibility of leakage of fluids into or out of fluid inclusions subjected to large pressure gradients has always been considered a serious problem in the interpretation of inclusion data. As previous experimental evidence on leakage was contradictory, new experiments were performed. Inclusion vapor bubble diameters in twelve quartz crystals (≤ 3 mm; 8 localities), not sawn, ground or polished, were measured. The samples were run at Pa-.o,-4,000 bars, at T u 100°-410° C, for ≤ 17 days total, and remeasured after each run. Similar experiments at ≤ 155° C were made on sphalerite and calcite. Most inclusions in most samples (even those only 5am under the surface in quartz) showed no change in bubble diameter, hence no leakage. A few exceptions, mainly among inclusions homogenizing at T « Tru, had P internal » P internal , hence they ruptured and lost liquid during the 410° C run. From this work and a review of the literature, we conclude that most inclusions have not suffered major leakage. Some previous experiments indicating leakage may be explained by microfractures introduced during sample preparation. The present work does not , however, preclude the possibility of diffusion of small but chemically significant amounts of substances such as hydrogen in or out of inclusions .

Economic Geology↗

USGS2017

Genetic and grade and tonnage models for sandstone-hosted roll-type uranium deposits, Texas Coastal Plain, USA

The coincidence of a number of geologic and climatic factors combined to create conditions favorable for the development of mineable concentrations of uranium hosted by Eocene through Pliocene sandstones in the Texas Coastal Plain. Here 254 uranium occurrences, including 169 deposits, 73 prospects, 6 showings and 4 anomalies, have been identified. About 80 million pounds of U 3 O 8 have been produced and about 60 million pounds of identified producible U 3 O 8 remain in place. The development of economic roll-type uranium deposits requires a source, large-scale transport of uranium in groundwater, and deposition in reducing zones within a sedimentary sequence. The weight of the evidence supports a source from thick sequences of volcanic ash and volcaniclastic sediment derived mostly from the Trans-Pecos volcanic field and Sierra Madre Occidental that lie west of the region. The thickest accumulations of source material were deposited and preserved south and west of the San Marcos arch in the Catahoula Formation. By the early Oligocene, a formerly uniformly subtropical climate along the Gulf Coast transitioned to a zoned climate in which the southwestern portion of Texas Coastal Plain was dry, and the eastern portion humid. The more arid climate in the southwestern area supported weathering of volcanic ash source rocks during pedogenesis and early diagenesis, concentration of uranium in groundwater and movement through host sediments. During the middle Tertiary Era, abundant clastic sediments were deposited in thick sequences by bed-load dominated fluvial systems in long-lived channel complexes that provided transmissive conduits favoring transport of uranium-rich groundwater. Groundwater transported uranium through permeable sandstones that were hydrologically connected with source rocks, commonly across formation boundaries driven by isostatic loading and eustatic sea level changes. Uranium roll fronts formed as a result of the interaction of uranium-rich groundwater with either (1) organic-rich debris adjacent to large long-lived fluvial channels and barrier–bar sequences or (2) extrinsic reductants entrained in formation water or discrete gas that migrated into host units via faults and along the flanks of salt domes and shale diapirs. The southwestern portion of the region, the Rio Grande embayment, contains all the necessary factors required for roll-type uranium deposits. However, the eastern portion of the region, the Houston embayment, is challenged by a humid environment and a lack of source rock and transmissive units, which may combine to preclude the deposition of economic deposits. A grade and tonnage model for the Texas Coastal Plain shows that the Texas deposits represent a lower tonnage subset of roll-type deposits that occur around the world, and required aggregation of production centers into deposits based on geologic interpretation for the purpose of conducting a quantitative mineral resource assessment.

Texas↗

USGS2007

Book review: Geology of gem deposits

Geology of Gem Deposits is the most recent addition to the classic short course volumes published by the Mineralogical Association of Canada. Although not as comprehensive as the title might imply, this volume does contain overview papers devoted (in varying degrees) to the geology of diamond, beryl, corundum, chrysoberyl, tanzanite and tsarvorite, topaz, and jade deposits, as well as gem-bearing pegmatites and colored gemstones of Canada. Individually, most of the chapters provide robust overviews of the gems they cover. However, as presented, these papers do not make a well-organized and cohesive volume. The content, structure, and organization of each of these papers vary significantly. Despite this shortcoming, a number of the chapters cover relevant geologic information, making the book an important contribution for economic geologists interested in the exploration and geology of gem deposits.

Economic Geology↗

USGS2011

Aqueous geochemical data from the analysis of stream-water samples collected in June and August 2008—Taylor Mountains 1:250,000- and Dillingham D-4 1:63,360-scale quadrangles, Alaska

We report on the chemical analysis of water samples collected from the Taylor Mountains 1:250,000- and Dillingham D-4 1:63,360-scale quadrangles, Alaska. Reported parameters include pH, conductivity, water temperature, major cation and anion concentrations, and trace-element concentrations. We collected the samples as part of a multiyear U.S. Geological Survey project entitled "Geologic and Mineral Deposit Data for Alaskan Economic Development." Data presented here are from samples collected in June and August 2008. Minimal interpretation accompanies this data release. This is the fourth release of aqueous geochemical data from this project; data from samples collected in 2004, 2005, and 2006 were published previously. The data in this report augment but do not duplicate or supersede the previous data releases. Site selection was based on a regional sampling strategy that focused on first- and second-order drainages. Water sample sites were selected on the basis of landscape parameters that included physiography, wetland extent, lithological changes, and a cursory field review of mineralogy from pan concentrates. Stream water in the study area is dominated by bicarbonate (HCO 3 - ), although in a few samples more than 50 percent of the anionic charge can be attributed to sulfate (SO 4 2- ). The major-cation chemistry of these samples ranges from Ca 2+ -Mg 2+ dominated to a mix of Ca 2+ -Mg 2+ -Na + +K 2+ . In most cases, analysis of duplicate samples showed good agreement for the major cation and major anions with the exception of the duplicate samples at site 08TA565. At site 08TA565, Ca, Mg, Cl, and CaCO 3 exceeded 25 percent and the concentrations of trace elements As, Fe and Mn also exceeded 25 percent in this duplicate pair. Chloride concentration varied by more than 25 percent in 5 of the 11 duplicated samples. Trace-element concentrations in these samples generally were at or near the detection limit for the method used and, except for Co at site 08TA565, generally good agreement was determined between duplicate samples for elements with detectable concentrations. Major-ion concentrations were below detection limits in all field blanks, and the trace-element concentrations also were generally below detection limits; however, Co, Mn, Na, Zn, Cl, and Hg were detected in one or more field blank samples.

Alaska↗

USGS2020

Hydraulic fracturing induced seismicity

Hydraulic fracturing (HF) is a technique that is used for extracting petroleum resources from impermeable host rocks. In this process, fluid injected under high pressure causes fractures to propagate. This technique has been transformative for the hydrocarbon industry, unlocking otherwise stranded resources; however, environmental concerns make HF controversial. One concern is HF‐induced seismicity, since fluids driven under high pressure also have the potential to reactivate faults. Controversy has inevitably followed these HF‐induced earthquakes, with economic and human losses from ground shaking at one extreme and moratoriums on resource development at the other. Here, we review the state of knowledge of this category of induced seismicity. We first cover essential background information on HF along with an overview of published induced earthquake cases to date. Expanding on this, we synthesize the common themes and interpret the origin of these commonalities, which include recurrent earthquake swarms, proximity to well bore, rapid response to stimulation, and a paucity of reported cases. Next, we discuss the unanswered questions that naturally arise from these commonalities, leading to potential research themes: consistent recognition of cases, proposed triggering mechanisms, geologically susceptible conditions, identification of operational controls, effective mitigation efforts, and science‐informed regulatory management. HF‐induced seismicity provides a unique opportunity to better understand and manage earthquake rupture processes; overall, understanding HF‐induced earthquakes is important in order to avoid extreme reactions in either direction.

Reviews of Geophysics↗

USGS2002

Prioritizing High-Temperature Geothermal Resources in Utah

The Utah Geological Survey and the Utah Energy Office recently released geothermal resource information for Utah as a "digital atlas." We are now expanding this project to include economic analyses of selected geothermal sites and previously unavailable resource information. The enhancements to the digital atlas will include new resource, demographic, regulatory, economic, and other information to allow analyses of economic factors for comparing and ranking geothermal resource sites in Utah for potential electric power development. New resource information includes temperature gradient and fluid chemistry data, which was previously proprietary. Economic analyses are based upon a project evaluation model to assess capital and operating expenses for a variety of geothermal powerplant configuration scenarios. A review of legal and institutional issues regarding geothermal development coupled with water development will also be included.

Conference Paper↗

USGS2006

Aqueous geochemical data from the analysis of stream-water samples collected in June and July 2005 — Taylor Mountains 1:250,000 scale quadrangle, Alaska

We report on the chemical analysis of water samples collected from the Taylor Mountains 1:250,000-scale quadrangle. Parameters for which data are reported include pH, conductivity, water temperature, major cation and anion concentrations, trace-element concentrations, and dissolved organic-carbon concentrations. Samples were collected as part of a multiyear U.S. Geological Survey project "Geologic and Mineral Deposit Data for Alaskan Economic Development." Data presented here are from samples collected in June and July of 2005. The data are being released at this time with minimal interpretation. This is the second release of aqueous geochemical data from this project; 2004 aqueous geochemical data were published previously ( Wang and others, 2006 ). The data in this report augment but do not duplicate or supersede the previous data release. Site selection was based on a regional sampling strategy that focused on first- and second-order drainages. Water sample site selection was based on landscape parameters that included physiography, wetland extent, lithological changes, and a cursory field review of mineralogy from pan concentrates. Stream water in the Taylor Mountians quadrangle is dominated by bicarbonate (HCO 3- ), though in a few samples more than 50 percent of the anionic charge can be attributed to sulfate (SO 4 2- ). The major-cation chemistry ranges from Ca 2+ /Mg 2+ dominated to a mix of Ca 2+ /Mg 2+ /Na + +K + . In general, good agreement was found between the major cations and anions in the duplicate samples. Many trace elements in these samples were at or near the analytical method detection limit, but good agreement was found between duplicate samples for elements with detectable concentrations. With the exception of a total mercury concentration of 0.33 ng/L detected in a field blank, field blank major-ion and trace-elements concentrations were below detection.

Alaska↗

USGS2011

Aqueous geochemical data from the analysis of stream-water samples collected in June and July 2006 — Taylor Mountains 1:250,000-scale quadrangle, Alaska

We report on the chemical analysis of water samples collected from the Taylor Mountains 1:250,000-scale quadrangle, Alaska. Parameters for which data are reported include pH, conductivity, water temperature, major cation and anion concentrations, trace-element concentrations, and dissolved organic-carbon concentrations. Samples were collected as part of a multiyear U.S. Geological Survey project entitled ?Geologic and Mineral Deposit Data for Alaskan Economic Development.? Data presented here are from samples collected in June and July 2006. The data are being released at this time with minimal interpretation. This is the third release of aqueous geochemical data from this project; aqueous geochemical data from samples collected in 2004 and 2005 were published previously. The data in this report augment but do not duplicate or supersede the previous data release. Site selection was based on a regional sampling strategy that focused on first- and second-order drainages. Water sample site selection was based on landscape parameters that included physiography, wetland extent, lithological changes, and a cursory field review of mineralogy from pan concentrates. Stream water in the Taylor Mountains quadrangle is dominated by bicarbonate (HCO3-), although in a few samples more than 50 percent of the anionic charge can be attributed to sulfate (SO42-). The major-cation chemistry ranges from Ca2+/Mg2+ dominated to a mix of Ca2+/Mg2+/Na++K+. Generally, good agreement was found between the major cations and anions in the duplicate samples. Many trace elements in these samples were at or near the analytical method detection limit, but good agreement was found between duplicate samples for elements with detectable concentrations. All field blank major-ion and trace-element concentrations were below detection.

Alaska↗