Search USGSSearch

SEARCH · Search USGS

Results for “Landslides”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

74 records · Page 4Linked to original sources

Late Pleistocene kinematics of the Great Southern Puerto Rico Fault Zone, Puerto Rico

Several onshore faults in southern Puerto Rico have recently been recognized as Quaternary active. However, the kinematics of these faults, particularly any lateral component, remain largely unconstrained. It is difficult to characterize low strain‐rate faults, partially due to extensive erosional and anthropogenic landscape modification, steep relief, and frequent landsliding, limiting the preservation of geomorphic features that could serve as recorders of fault motion. Here, we constrain the kinematics along sections of the Great Southern Puerto Rico Fault Zone (GSPRFZ) on the southern coastal plain of Puerto Rico. We integrate ∼1‐m‐resolution light detection and ranging (lidar)‐derived topography, historical air photos, and field mapping to identify a series of ∼50–1200‐m‐long fault scarps and lineaments that trend northwest–southeast and extend for ≥25 km across the southern coastal plain. Fault scarps are primarily south facing, cut across topography, and displace Quaternary deposits and landforms. We document multiple offset geomorphic markers, including channel thalwegs and interfluves formed in deposits previously mapped as Quaternary piedmont alluvial plain. We observe both vertical (south‐side‐down) and right‐lateral meter‐scale displacements, which indicate that the GSPRFZ accommodates right‐lateral oblique motion in the late Pleistocene, consistent with northeast motion of the Puerto Rico and the Virgin Islands microplate away from the Hispaniola block.

Puerto Rico

Participatory engagement to reduce communication gaps

Underserved communities, especially those in coastal areas in Puerto Rico, face significant threats from natural hazards such as hurricanes and rising sea levels. Limited funding hinders the investment in costly mitigation measures, increasing exposure to natural disasters. Providing coastal resources and data products through effective communication mechanisms is fundamental to improving the well-being of these underserved coastal communities. The overall objectives of the pilot effort to engage and connect with underserved coastal communities in Puerto Rico were the following: (1) compile a comprehensive database of the projects and resources relevant to natural hazards in Puerto Rico; (2) foster connections with Puerto Rican interested parties to better understand their priorities regarding coastal hazards and provide them with pertinent U.S. Geological Survey (USGS) resources; and (3) identify knowledge gaps to guide future USGS projects in Puerto Rico. Here we outline our participatory engagement framework and process, along with two specific resources developed with the information collected from this effort. These resources are available in English and Spanish and consist of user-friendly, non-technical information products. Among them are: (1) a website where users can learn about USGS research on landslides, hurricanes, earthquakes, water resources, coastal hazards, tsunamis, and ecosystem hazards and environmental contaminants, and (2) a geonarrative highlighting shoreline changes in Puerto Rico with sections on historical shoreline trends, hurricane impacts, and potential solutions that could help protect communities and mitigate coastal hazards. Continuing participatory engagement in future projects could enhance the accessibility and usability of natural hazards resources within the community.

San Juan

Using the D-Claw software package to model lahars in the Middle Fork Nooksack River drainage and beyond, Mount Baker, Washington

Lahars, or volcanic mudflows, are the most hazardous eruption-related phenomena that will affect communities living along rivers that originate on Mount Baker. In the past 15,000 years, the largest lahars from Mount Baker have affected the Middle Fork Nooksack River drainage and beyond. Here we use the physics-based D-Claw software package to model nine lahar scenarios that are initiated as water-saturated landslides between Sherman Crater and the Roman Wall on the Mount Baker edifice and flow down the Middle Fork Nooksack River. The scenarios range in volume from 1 to 260 million cubic meters and have an initial hydraulic permeability from 10 −12 to 10 −10 meters squared. Model output includes data such as flow depth, velocity, runout distance, area inundated, arrival time, and sediment concentration as well as information that allows scientists to calculate other important hydrologic characteristics such as lahar discharge. These data are important to officials who have the responsibility to plan for, or take mitigation measures against, future Mount Baker lahars. To check the validity of the D-Claw results, we compare the scenarios to known geologic information. We also compare D-Claw results with empirical models that have been used in the past to determine potential inundation areas, runout distances, and arrival times. These comparisons highlight similarities and differences between empirical and physics-based models. We also present D-Claw scenario-based animations to help scientists, officials, and lay people alike to visualize how future lahars could affect communities.

Washington

Using subducting plate motion to constrain Cascadia slab geometry and interface strength

Subduction zones are home to multiple geohazards driven by the evolution of the regional tectonics, including earthquakes, volcanic eruptions and landslides. Past evolution builds the present-day structure of the margin, while the present-day configuration of the system determines the state-of-stress in which individual hazardous events manifest. Regional simulations of subduction zones provide a tool to synthesize the tectonic history of a region and investigate how geologic features lead to variations in the state of stress across the subduction system. However, it is challenging to design regional models that provide a force-balance that is consistent with the large-scale motion of surrounding tectonic plates while also not over-constraining the solution. Here, we present new models for the Cascadia subduction zone that meet these criteria and demonstrate how the motion of the subducting Juan de Fuca plate can be used to determine the along-strike variations in the viscous (long-term) coupling across the plate boundary. All successful models require lower viscous coupling in the northern section of the trench compared to the central and southern sections. However, due to uncertainties in the geometry of the Cascadia slab, we find that there is a trade-off between along-strike variation in viscous coupling and slab shape. Better constraints on the slab shape, and/or use of other observations are needed to resolve this trade-off. The approach presented here provides a framework for further exploring how geologic features in the overriding plate and the properties of the plate boundary region affect the state-of-stress across this and other subduction zones.

Cascadia subduction zone

Interplay between tectonics and submarine mass transport deposits in Cortes Basin: New high-resolution geophysics in the Outer California Borderland

The Outer California Borderland (OCB) is an active transform plate boundary offshore Southern California, where the relationship between faulting and submarine mass transport deposits (MTDs) remains poorly understood. Onshore paleoseismic data provide high-resolution earthquake records, whereas marine geophysical data capture longer-term histories. Offshore fault systems pose hazards to infrastructure and dense coastal populations, particularly when linked to submarine landslides. We present new high-resolution geophysical data set (cruise SR2303), including bathymetric and CHIRP sub-bottom data integrated with legacy seismic reflection data and chronostratigraphic constraints from ODP Site 1012 to examine Quaternary MTD recurrence and tectonic controls in the Cortes Basin, OCB. Bathymetry shows deformational features, including slide scarps and previously unmapped fault segments with evidence of Holocene activity. CHIRP profiles reveal 10 stacked MTDs in the East Cortes Basin and 8 in the West Cortes Basin, spanning ∼752 ka with an average recurrence of ∼83.6 ± 1 ka. Acoustic imaging shows 7 MTD intervals coinciding with fault offset increments and fault growth suggesting earthquake-triggered mass wasting. A strong association between MTD occurrences and sea-level extremes also supports glacio-eustatic contribution to slope failure. Stratigraphic correlations suggest quasi-synchronous MTDs across the eastern and western areas, likely triggered by larger eathquakes in the Quaternary. Although the identified MTDs occur relatively far from the Southern California coast, they still pose a potential tsunamigenic hazard requiring further assessment. Moreover, if linked to earthquakes along major strike-slip faults, for example, the Ferrelo fault, the MTDs may provide valuable proxies to constrain rupture scenarios and fault connectivity within the understudied OCB.

California

Patterns and drivers of cliff erosion in Big Sur, California, USA using repeat photogrammetry, 2017–2023

Seacliff erosion in steep terrain poses major risks to transportation and critical infrastructure. In Big Sur, California, USA, seacliff erosion threatens the sustainability of the central coast stretch of California State Route 1, a transportation corridor that is critical to the region's economy. Published cliff retreat rates for the region range from 1 to 40 cm yr −1 , highlighting that high-resolution, process-based studies could enhance understanding of the causes of spatial and temporal variability. We quantified cliff erosion and investigated its drivers along ∼13 km of the Big Sur coastline at week–month timescales during the late fall to early spring wet seasons between January 2017 and June 2023 by analyzing 3D point clouds developed from aerial imagery using four-dimensional structure-from-motion (4D SfM) photogrammetry techniques. We calculated cliff face retreat rates of 2.23 ± 3.06 cm yr −1 (mean ±1 σ ), an order of magnitude lower than long-term estimated rates for the region (which included large deep-seated landslides), but in line with short-term rates reported across California. Change detection imagery comparison, cliff profiles through time, and statistical analysis reveal a cyclical cliff evolution process in which erosion by wave action at the cliff base destabilizes the cliff and primes it for subsequent failure during precipitation events. Although more erosion by volume could be attributed to precipitation-induced increases in soil moisture (784 m 3 km −1 yr −1 ) compared with erosion attributed to wave power (282 m 3 km −1 yr −1 ), our observations underscore the coupled nature of these processes in driving cliff evolution, consistent with established theory and observations.

California

Wavelet Inversion for SliP (WISP): Open-source earthquake slip modeling software

Models of the spatiotemporal evolution of earthquake slip, termed finite-fault models, are a critical component of rapid earthquake and tsunami response, earthquake forecasting, seismic ground-motion estimates, and studies of earthquake kinematics. Here, we detail a newly released finite-fault modeling software, Wavelet Inversion for SliP (WISP), in use at the U.S. Geological Survey’s National Earthquake Information Center (NEIC) and available to the public. WISP version 1.1.0 allows inversion of teleseismic body and surface waves, as well as local strong-motion, static and dynamic Global Navigation Satellite System, and satellite imagery (e.g., Interferometric Synthetic Aperture Radar) observations on single or multiple planar fault segments. The software is used in NEIC rapid response of earthquakes M w ≥ 7, generally resulting in a published model within the first few hours after the event origin time. The rupture location and dimensions are then used as inputs to downstream products to estimate earthquake shaking, predict loss, and model the likelihood of secondary hazards, namely landslides and liquefaction. WISP is also used in research studies to evaluate the characteristics of complex ruptures including multifault ruptures and earthquake doublets, among others. The WISP version 1.1.0 software release is composed of Python-wrapped FORTRAN code to accomplish the inversion procedure. A simple command line interface facilitates ease of use even for those with only a cursory knowledge of Python scripting. WISP version 1.1.0 includes a Jupyter Notebook tutorial demonstrating use of the software for modeling the 2015 M w 8.3 Illapel, Chile, earthquake. In parallel with the tutorial, we demonstrate the typical usage of the WISP software using the M w 8.3 Illapel earthquake example here.

Seismological Research Letters

Timescales of cumulate mobilization and mixing for the 1868 A.D. eruption of Mauna Loa, Island of Hawai‘i

The deadly 1868 A.D. eruption of Mauna Loa’s lower Southwest Rift Zone (Island of Hawai‘i) included a M7.9 earthquake and associated tsunami and landslides, demonstrating the severe hazards posed by Earth’s largest active subaerial volcano. To better understand the relationship between intense seismic activity, dike emplacement, magma storage, transport histories, and mobilization of olivine cumulates at Mauna Loa, we examine compositional zoning of olivine in the 1868 lava flows. Samples range from basalt (< 10% olivine) to picrite (30–40% olivine). The olivine cargo is heterogeneous (Fo 78.2–89.2 ; forsterite = [Mg/(Mg + Fe) × 100]) but dominated by ~ Fo 89 cores that lie above the Fe-Mg equilibrium field of host glasses. Crystal rims < Fo 80 are due to post-eruptive modification in slow cooling lava flows. Minor element compositions fall within the range of other Mauna Loa olivine erupted in the past 200 years. Olivine crystals exhibit both normal and complex Fo zoning patterns that yield timescales of diffusive re-equilibration that range from 3 to 258 days, with 72% of crystals recording 71 days or less. These timescales correspond to magmatic priming of the summit reservoir system ~ 2 months prior to the eruption and the M7.9 earthquake likely facilitated the transport of the crystal-rich summit-derived magmas downrift shortly prior to eruption. If the recently proposed faster Fe-Mg diffusion coefficient is used, timescales instead range from < 1 day to 25 days, with most recording 1 week or less. In this scenario, most of the olivine zoning would have to have been generated after the M7.9 earthquake perturbed the system.

Hawaii

Cascading land surface hazards as a nexus in the Earth system

Earth’s surface is sculpted by numerous processes that move sediment, ranging from gradual and benign to abrupt and catastrophic. Although infrequent, high-magnitude sediment mobilization events can be hazardous to people and infrastructure, leaving topographic imprints on the landscape and remarkable narratives in the historical record. Hazardous events such as fires, storms, and earthquakes accelerate erosion and sediment transport, increasing landscape sensitivity to subsequent perturbations, thus forming a cascading hazard. Although the redistribution of sediment across Earth’s landscape can result in higher risks to vulnerable populations, cascading processes are commonly unaccounted for in hazard assessments. Cascading hazards can occur almost immediately after triggering events, such as coseismic landslides, or over months, years, or even decades after an initial perturbation, such as debris flows after wildfires or flooding in channels alluviated by volcanic debris. Sediment cascades span Earth’s surface, from mountaintops to river valleys, where erosion, deposition, and aggradation can lead to a myriad of hazardous processes, including decreased river conveyance capacity, which increases the likelihood of downstream flooding. An improved understanding of the magnitude, frequency, and persistence of cascading hazards is critical given the rapid changes in the frequency and severity of storms, fires, sea-level change, and cryospheric melting, as well as the expansion of high-population-density urban footprints in regions susceptible to solid Earth hazards. Understanding the full consequences and underlying physics of Earth’s cascading land surface hazards can help minimize future human and economic losses.

California

Site-specific, extended ShakeMaps for earthquake engineering applications

The U.S. Geological Survey (USGS) routinely produces ShakeMaps of shaking intensity across the globe. Due to practical constraints, the number of response spectral periods was limited to three standard periods (0.3, 1.0, and 3.0 sec). We have recently developed the tools that are necessary to expand this functionality to include 22 periods (matching the current U.S. National Seismic Hazard Model periods) as well as the orientation-independent components (e.g., “RotD50”). We refer to ShakeMap products that include these extensions as “extended ShakeMaps.” The added level of complexity motivated us to also develop a user-friendly tool called the “ShakeMap Sampling Tool” (SST) that gives all the estimated shaking metrics for a specific location (or list of locations). Additionally, we develop a web application where users can input locations of interest and view/download the SST results. We further familiarize users with the concept of “Composite ShakeMaps.” For earthquakes sequences such as a mainshock and larger foreshocks and aftershocks, this provides a map of the maximum value of each shaking metric, which is useful for overall loss estimates, the full extent of ground failure triggering potential, and a better portrayal of the repeated shaking levels at a given point for a series of earthquakes. Such a site-specific shaking history facilitates earthquake forensics at building or infrastructure sites for which damage may be of concern, as described in the Disproportionate Damage Earthquake trigger specified in the IEBC (2018, Section 405.2.2) and in developing ATC-145 guidelines (Guidelines for Post-Earthquake Assessment, Repair, and Retrofit of Buildings). The composite ShakeMap can be combined with the SST for a variety of earthquake-hazard applications, such as systematically inferring triggering shaking estimates at specific sites of geotechnical interest for landsliding, liquefaction, and lateral-spreading hazards.

Kahramanmaraş

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee

Estimated average annualized tsunami losses for the United States

Tsunami hazards are substantial threats to coastal communities across the United States (U.S.) and its territories. U.S. states and territories collaborate through the National Tsunami Hazard Mitigation Program (NTHMP) to develop their own tsunami-hazard information for outreach and evacuation planning. An effort to curate this tsunami-hazard information to support comprehensive risk analysis at the national level has not yet been completed. In support of this effort, the Federal Emergency Management Agency (FEMA) collaborated with the NTHMP, the National Oceanic and Atmospheric Administration (NOAA) and the U.S. Geological Survey (USGS) starting in 2023. This collaboration included the collection and analysis of existing tsunami hazard data and methods in the U.S. Tsunami subject matter experts identified and selected scientifically defensible methods for estimating the risks to buildings and populations in coastal communities. These efforts may support decision making regarding resilience policies, priorities, strategies and funding levels. Tsunamis can be triggered by earthquakes, subaerial or submarine landslides, volcanic eruptions, glacial calving, near-earth objects, weather or other events. These events can cause severe destruction, injuries, and loss of life due to powerful currents and flooding. Tsunamis pose a substantial threat to the western United States and all U.S. territories, as described below. ■ Hawaii is threatened by distant tsunamis due to its central location in the Pacific Ocean basin and has a history of local events. ■ Alaska, particularly the Aleutian Islands, faces local tsunami threats due to proximity to the Alaska-Aleutian Subduction Zone, as well as distant tsunamis from around the Pacific Ocean basin. ■ The western coast of the U.S. is threatened by distant tsunamis from around the Pacific Ocean basin and local source tsunamis from earthquakes generated within the Cascadia Subduction Zone in the Pacific Northwest. ■ American Samoa faces local tsunami threats from earthquakes generated in the nearby Tonga Trench, as well as distant tsunami threats. ■ Guam and the Commonwealth of the Northern Mariana Islands are threatened by local tsunamis from the nearby Mariana Subduction Zone, as well as distant sources from around the Pacific Ocean Basin. ■ Puerto Rico and the United States Virgin Islands are threatened by multiple local and distant tsunami sources, such as the Puerto Rico Trench (PRT), given their location in the complex seismic region of the Caribbean Sea. Several historical events stand out because of their catastrophic impacts. ■ In the Pacific Northwest, the 1700 Cascadia earthquake caused a tsunami that affected coastal Native American communities, though the extent of the damage is not fully documented (Ludwin, et al., 2005). ■ In Puerto Rico, the 1918 earthquake triggered a tsunami that caused $77 million in damage in 2022 dollars and 116 fatalities, primarily along the western coast (Coffman et al., 1982). ■ The 1946 Aleutian Islands earthquake triggered a massive tsunami that devastated Hilo, Hawaii, killing 158 people and resulting in approximately $375 million in damage (adjusted to 2022 dollars) (Fisher et al., 2023). ■ The 1964 Alaska earthquake (M 9.2) generated tsunamis that caused severe destruction in some communities across Alaska, Oregon, and California. This disaster led to a total of 124 fatalities and approximately $2.9 billion in property damage (adjusted to 2022 dollars) (Brocher et al., 2014) (Alaska Science Center, 2024). ■ In American Samoa, a tsunami generated by the 2009 Samoa earthquake (Mw 8.1) caused widespread devastation, resulting in 34 confirmed fatalities (Apatu et al., 2013) and economic losses exceeding $160 million (adjusted to 2022 dollars) (DHS, 2011). More recent events, including the 2010 Chile earthquake, the 2011 Japan earthquake, and the 2022 Tonga volcanic eruption, resulted in millions of dollars in damage to numerous ports and harbors in the U.S. South Pacific territories, Hawaii, and along the west coast of the U.S. (Lynett, et al., 2022) (Wilson, et al., 2013). Since these events, the expansion of the built environment in lowlying areas along the coast has increased the exposure of buildings and people, thereby further escalating community risk from tsunamis. This report provides a comprehensive national assessment of earthquake-generated tsunami risk. It does not include impacts from tsunamis generated by landslides, volcanic eruptions, glacial calving, near-earth objects, weather, or other events. This study is based on the best available hazard data from the U.S. Pacific Coast (California, Oregon and Washington), Alaska, Hawaii, U.S. Pacific Territories (American Samoa, Guam and Commonwealth of the Northern Mariana Islands) and Caribbean Territories (Puerto Rico and United States Virgin Islands). Tsunami risks associated with states along the East Coast, Gulf Coast, and Great Lakes are not included in this study because Hazus 6.1 software (FEMA 2024a) does not currently include the ability to analyze tsunami risk in those states. Once modeling capabilities and tsunami hazard data become available for additional states, FEMA may incorporate these data into future editions of this study.

Alaska, California, Hawaii Oregon, Washington

Plan to coordinate post-earthquake investigations supported by the National Earthquake Hazards Reduction Program (NEHRP)

Introduction This report presents a plan supported by the National Earthquake Hazards Reduction Program (NEHRP) to coordinate domestic and international post-earthquake investigations (herein called “the Plan”). Post-earthquake scientific and engineering investigations are undertaken to capture critical information to understand the causes and impacts of the event, lessons from which can substantially improve the Nation’s resilience after future earthquakes. NEHRP is the Federal Government’s coordinated nationwide program to reduce risks to life and property from earthquakes. The Plan describes the activation and coordination of the four designated NEHRP Agencies in the Federal Government: Federal Emergency Management Agency, National Institute of Standards and Technology, U.S. National Science Foundation, and U.S. Geological Survey (USGS). The Plan also describes coordination between NEHRP Agencies and other organizations that may participate in pre-event and post-earthquake investigations, including non-NEHRP Federal agencies; State, regional, local, Tribal, and territorial agencies; domestic nongovernmental organizations; academic institutions and affiliated organizations; private companies; foreign governmental agencies and nongovernmental organizations; and international organizations. The Plan delineates the coordination of NEHRP post-earthquake scientific and engineering investigations to document the direct, indirect, and cascading physical and societal impacts from fault rupture and ground shaking hazards and from secondary hazards such as landslides, liquefaction, and tsunamis. In addition, the Plan identifies pre-event activities necessary to ensure that post-earthquake investigations are executed effectively. The USGS is the lead NEHRP Agency for activating and coordinating NEHRP post-earthquake investigations and for implementing this Plan. The USGS also leads coordination of the NEHRP Agencies in completing the pre-event activities identified in the Plan. The Plan has new information and supersedes USGS Circular 1242, “The Plan to Coordinate NEHRP Post-Earthquake Investigations,” which was published in 2003. This second-generation Plan was developed with the assistance of the Applied Technology Council (ATC) of Redwood City, California, under USGS contract 140G0121P0309, ATC-155. A 17-member Project Review Panel provided guidance on plan development, and input was solicited from subject matter experts representing key stakeholder groups and from participants at a public workshop.

Circular

Streams, springs, and volcanic lakes for volcano monitoring

Introduction Volcanic unrest can trigger appreciable change to surface waters such as streams, springs, and volcanic lakes. Magma degassing produces gases and soluble salts that are absorbed into groundwater that feeds streams and lakes. As magma ascends, the amount of heat and degassing will increase, and so will any related geochemical and thermal signal. Subsurface magma movement can cause pressurization that alters hydrostatic head and may induce groundwater discharge. Fluid-pressure changes have been linked to distal volcano-tectonic earthquakes (White and McCausland, 2016; Coulon and others, 2017) and phreatic eruptions (for example, Yamaoka and others, 2016). Clearly, changes in groundwater and surface waters are both indicators of unrest and clues to how and where magma is rising toward the surface. Where possible, it is prudent to incorporate real-time hydrologic data into multiparameter monitoring of restless volcanoes. Hydrologic dynamics can also be tracked by changes in groundwater levels that are commonly measured in shallow boreholes (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume, on boreholes; Hurwitz and Lowenstern, 2024). Although inferred to be common, relatively few volcano-hydrology anomalies are well documented, and many are essentially anecdotal (Newhall and others, 2001), reflecting the fact that high-resolution time series remain rare. Extreme examples include the 2008 eruption of Nevado del Huila, Colombia, where relatively minor phreatomagmatic eruptions were accompanied by expulsion of as much as 300 million cubic meters of groundwater from fissures high on the volcano (Worni and others, 2011), generating large lahars. Substantial decreases in flow rate from springs about 8 kilometers from the summit of Mayon Volcano, Philippines, have been noted before most eruptions in the 20th century (Newhall and others, 2001). Stream monitoring at Redoubt Volcano in 2009 allowed Werner and others (2012) to recognize that groundwater was unable to absorb (or scrub) the high flux of volcanic gas and that a high CO 2 /SO 2 precursor signal had been evident for 5 months prior to the eruption. A key to better interpreting hydrologic anomalies—or even identifying them—is therefore obtaining adequate baseline data. Most hydrologic monitoring at U.S. volcanoes has been accomplished by intermittent sampling surveys with annual or less frequent sampling (for example, https://hotspringchem.wr.usgs.gov/index.php ). More frequent sampling, however, generally is needed to establish reliable baselines. A recent hydrologic and hydrothermal monitoring experiment at 25 sites and 10 of the 12 level 4 (very high threat) volcanoes in the U.S. portion of the Cascade Range demonstrated that there is sufficient temporal variability in hydrothermal fluxes, even during quiescent periods, that one-time measurements will commonly have limited interpretive value (Crankshaw and others, 2018). Thus, surveys are best augmented with data from streamgages (for example, Evans and others, 2004; Bergfeld and others, 2008). Streamflow (water discharge) data allow measured temperature and specific conductance to be converted to heat and solute mass fluxes, which could be insightful parameters for detecting anomalous activity (McCleskey and others, 2012). At the Yellowstone Caldera, long-term monitoring of river solutes has allowed calculation of the chloride flux, a proxy for heat discharge (Hurwitz and others, 2007; McCleskey and others, 2016) from the subsurface magma. This is readily accomplished because data from streamgages are continuously recorded and archived by the U.S. Geological Survey (USGS) National Water Information System (NWIS) (USGS, 2024). Similar studies on stratovolcanoes or shield volcanoes would be scientifically useful, and yet are logistically challenging, requiring streamgages on numerous radial drainages complemented by either frequent manual sampling or numerous deployments of equipment to measure water temperature and specific conductance as a proxy for water chemistry. Another challenge is that some volcanic areas, especially shield volcanoes, are characterized by near-surface porous rocks and soils, such that surface streams are rare and replaced by distant, dilute large-volume springs with only a trace of any original volcanically sourced water (Manga, 2001; Hurwitz and others, 2021). Volcanic lakes are worthy of special attention for monitoring efforts, as their temperature and composition can provide evidence of increased flux of volatile-rich fluids from below. Quantifying changes in volatile and heat release from magma can be simpler in lakes than for volcanoes with radial drainages and no major lakes. Moreover, volcanic lakes pose a range of hazards themselves, including phreatomagmatic eruptions, debris flows, flank collapse, tsunamis, and toxic gas release (Mastin and Witter, 2000; Delmelle and others, 2015; Manville, 2015; Rouwet and others, 2015)—hazards that have historically been responsible for substantial loss of life at many volcanoes worldwide (Manville, 2015). Catastrophic CO 2 release at Lake Nyos, Cameroon, in 1986 suffocated about 1,750 people and about 3,500 livestock and was probably triggered by a large landslide into the gas-saturated lake (Kling and others, 1987; Evans and others, 1993). Gas-charged springs in Soda Bay within Clear Lake (California) have caused almost a dozen deaths to bathers in the past hundred years (ABC News, 2000). A 2005 example of lake overturn and abundant gas release was documented at Mount Chiginagak in Alaska (Schaefer and others, 2008) but did not result in any human casualties. Although thermally stratified lakes, which promote trapping of exsolved magmatic gas, tend to develop in tropical regions, the phenomenon can also arise where salinity creates meromixis (a condition in which a lake does not mix completely), as occurs in Mono Lake, California (Jellison and Melack, 1993; Jellison and others, 1998). If magma erupts or flows into a lake, the interaction between hot magma and cold water can be explosive (Mastin and others, 2004; Zimanowski and others, 2015) and substantially expand the area affected by the eruption. Another hazard is the breaching of crater rims by landslides triggered by volcanic and (or) seismic activity. Under some circumstances, substantial volumes of water can be displaced, leading to large floods and lahars. Late Holocene lake flooding from Aniakchak Crater in the Alaska Peninsula (Waythomas, 2022) and from Paulina Lake in Newberry Crater, Oregon (Chitwood and Jensen, 2000), caused by the failure of outlet sills, testify to the substantial hazards at lake-filled calderas. Several volcanic systems in the United States host lakes known to receive heat and gas from underlying magma. These lakes vary widely in area, depth, and chemical composition. Lakes are present at level 4 volcanoes, including Crater Lake and Newberry Volcano in Oregon; Yellowstone Caldera in Wyoming; Long Valley Caldera, Clear Lake volcanic field, Medicine Lake, and Salton Buttes in California; and Aniakchak Crater, Mount Katmai, Fisher Caldera, Mount Okmok, and Kaguyak Crater, among others, in Alaska. A water lake was present in Halemaʻumaʻu, the crater of Kīlauea, Hawai‘i (fig. F1), from October 2019 to December 2020. Level 3 volcanoes with lakes include Mono Lake volcanic field (Calif.), Mount Bachelor (Ore.), Ukinrek Maars and Mount Chiginagak (Alaska), and Soda Lake (Nevada). In addition, there are lakes at many levels 1 and 2 volcanoes. In the United States, there are no strongly acidic lakes that receive abundant input of magmatic gas, such as those found at Mount Ruapehu (New Zealand), Ijen and Kelud (Indonesia), and Poás (Costa Rica). Nevertheless, many contain fluids that provide clues to magmatic processes below. Since publication of a previous report on recommended instrumentation for volcano monitoring (Moran and others, 2008), continuous hydrologic monitoring has become increasingly feasible. However, changes in water pressure, temperature, and chemistry remain, in general, poorly studied phenomena at volcanoes (Sparks, 2003; National Academies of Sciences, Engineering, and Medicine, 2017). Recent efforts by the USGS have included the temporary study of Cascade Range volcanoes, which included frequent (15 minute to hourly) temporal sampling of temperature, depth, and conductivity (Crankshaw and others, 2018; Ingebritsen and Evans, 2019). At Yellowstone Caldera, many streamgages have now added thermistors and specific conductance sensors, allowing estimation of time-dependent chloride flux as a proxy for variations in subsurface heat flux (McCleskey and others, 2012, 2016). Efforts to better understand lakes have also accelerated, with bathymetric mapping and sampling carried out at several locations in the United States. Especially thorough work was done at Yellowstone Lake thanks to the Hydrothermal Dynamics of Yellowstone Lake (HD-YLAKE, https://hdylake.org ) project, funded primarily by the National Science Foundation. In addition to geophysical surveys and recovery of cores and other samples, HD-YLAKE investigations included remotely operated vehicle (ROV) investigations of hydrothermal vents on the lake floor (fig. F2). Data collected by the ROV provided a better understanding of the thermal and chemical influx from lake-bottom hydrothermal systems (Sohn and others, 2017). In this chapter, we focus on detecting changes in the chemistry, temperature, discharge, or water levels of streams, springs, and lakes that can be caused by seismicity, volumetric strains, or increases in gas flux associated with ascending magma. There is unavoidable overlap with other chapters of this report. Samples of water and gas can also be obtained in boreholes ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–K, 5 p., https://doi.org/10.3133/sir20245062k. ">chapter K , this volume; Hurwitz and Lowenstern, 2024), both shallow and deep. Gas monitoring ( of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–E, 11 p., https://doi.org/10.3133/sir20245062e.">chapter E , this volume; Lewicki and others, 2024) relies in part on samples from springs and wells, particularly where measurable gas plumes are absent. Water acts as a trigger and lubricant for landslides and sediment-rich floods, and so hydrology has obvious relevance for lahar monitoring, as discussed in of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–H, 6 p., https://doi.org/10.3133/sir20245062h. ">chapter H (this volume; Thelen and others, 2024). Shared situational awareness among scientists engaged in geophysical, gas, and hydrologic monitoring will improve overall understanding of the volcanic hazard.

Scientific Investigations Report

Refining the earthquake history of south-central Alaska through lake records

The Alaska–Aleutian subduction zone (AASZ) is one of the world's most seismically active plate boundaries and the source of the 1964 M w 9.2 Great Alaska earthquake–the second largest instrumentally recorded earthquake in the world. Understanding the nature and frequency of such earthquakes is necessary for seismic and tsunami hazard assessment, but instrumental and historical records that span less than 150 years are too short to allow a statistically reliable analysis of earthquake recurrence times. This calls for studies of evidence of past earthquakes, extending the earthquake catalog further back in time. Subduction-zone paleoseismology in south-central Alaska is predominantly based on coastal evidence of land-level changes and tsunamis generated by megathrust earthquakes and preserved in the geological record. A complementary approach is lacustrine paleoseismology, which is still a relatively young discipline in Alaska. However, globally, lake basins are well-established high-resolution and continuous recorders of paleoseismic activity along subduction zones, relying on the identification of underwater landslide deposits and turbidites generated by seismic shaking. As a result, lake basins not only register ground shaking from megathrust earthquakes, but also from intraslab and crustal earthquakes, which are typically not accompanied by significant land-level changes. In this review paper, we combine coastal and lacustrine paleoseismology approaches to refine the south-central Alaskan earthquake history by comparing the paleoseismic records from two lakes (i.e., Eklutna Lake, located in the Chugach Mountain Range, and Skilak Lake, situated on the Kenai Peninsula) with the coastal and crustal earthquake catalog in Alaska. The resulting age ranges of all known megathrust earthquakes involving the Alaskan megathrust between the Kodiak and Prince William Sound (PWS) sections are more precise and accurate for the last 1.3 kyrs BP than the previously published age ranges from coastal records. As a result, this study supports the following key conclusions: (1) The 1964 CE earthquake was an exceptionally strong and unique event in the last 2000 years, rupturing the PWS, Kenai, Barren Islands, and Kodiak sections simultaneously. (2) The high-resolution and seasonal markings of the varved lake records now disentangle for the first time closely timed earthquakes, which was not possible based on the coastal evidence alone. (3) No persistent megathrust rupture boundaries exist. So, the possibility of a full rupture of the entire eastern AASZ, from PWS to Semidi cannot be excluded. (4) The rupture pattern in the eastern AASZ reveals superimposed cycles of multi-asperity ruptures (1964 earthquake) and clustered complementary partial ruptures, or rupture cascades. (5) The PWS section hosts the largest asperity in the eastern AASZ. (6) The shaking record of megathrust earthquakes indicates a time-dependent (quasiperiodic) behavior for the study area, but the observation of complementary clusters means that the hazards will not drop to zero but instead may even increase for a neighboring section. (7) The time-independent behavior of intraplate earthquakes implies that the intraslab hazard did not decrease following the 2016 and 2018 earthquakes. This study utilizes an integrated approach for subduction zone paleoseismology as a solution for unraveling recurrence and rupture patterns in Alaska, which can be applied worldwide.

Alaska

USGS—An Unparalleled Scientific Asset

The U.S. Geological Survey (USGS) delivers information critical to powering our economy, managing our natural resources, and keeping Americans safe and healthy. 1 Mapping the Nation $21B Geologic maps save users an estimated 15% in annual costs: a value of between $14B and $21B. $25.6B in annual value to users of imagery from Landsat satellites, which were codeveloped by NASA and the USGS and operated through their lifespans by the USGS. $13.5B in annual benefits is generated by the USGS's 3D Elevation Program. Securing America’s Energy Independence 44% USGS-identified undiscovered geothermal energy is equal to 44% of current U.S. electricity generation. 29.4B barrels of oil and 391.6 trillion cubic feet of gas in recoverable resources are available on U.S. public lands based on USGS assessments. Protecting Americans’ Health and Safety $424B in recent wildland fire damages highlight the need for USGS fire science, which supports efforts to protect communities and reduce risk. USGS earthquake, volcano, landslide, and coastal hazard monitoring and information save lives and minimize costs; for example, $2.8M can be saved because of USGS enhanced information about a Mauna Loa eruption. $4.5B is the estimated cost of annual flooding. Through a network of over 11,885 streamgages, the USGS supports public safety and enables forecasts, early warning systems, and management actions that protect lives and property. Supporting National Security $3.1B The USGS identified a $3.1B risk to the American economy if China restricts gallium imports. This is one example underscoring the importance of the USGS mapping critical minerals, investigating supply chains, and producing the Nation’s critical minerals list. Enhancing Our Lands and Waters $21B in estimated annual costs results from invasive species. The USGS’s invasive species research informs approaches used to reduce their effects on agriculture, water infrastructure, disease transmission, fisheries, and outdoor recreation. USGS innovations support early warnings for harmful algal blooms—over $2M in yearly benefits are provided to Kansas alone. $45B USGS science informs the management of big game (such as deer and elk). The big-game hunting industry contributes $45B to the U.S. economy. Fostering American Prosperity $4.1T Mineral commodities are necessary for the $4.1T in value added to the GDP by major industries that consume processed mineral materials and employ 1 million workers. Because of this, USGS data on mineral supply, demand, and trade are highly valued. 45,000 metric tons Rare earths power the growing technology economy, including cell phones, electric vehicles, and medical devices. For over 70 years, USGS work has supported the discovery of rare earth resources in California’s Mountain Pass area, which produced 45,000 metric tons of rare earth concentrates in 2024—over 11% of the global supply. Guarding American Food Security $70.2B USGS science informs early warning systems and management strategies to mitigate disease outbreaks in agriculture—critical research on highly pathogenic avian influenza, for example, helps safeguard the $70B value in poultry and egg production. $11.8B USGS groundwater tools are vital for agriculture; for example, in the Mississippi Alluvial Plain, 65% of farming relies on groundwater to support its $11.8B annual industry. 1 Values throughout are given in billions (B), millions (M), and trillions (T) of U.S. dollars. GDP is “Gross Domestic Product.” Percentages are shown as %.

General Information Product

Geologic map and structure sections along the southern part of the Bartlett Springs Fault Zone and adjacent areas from Cache Creek to Lake Berryessa, northern Coast Ranges, California

Introduction Located in the Coast Ranges of northern California, the Bartlett Springs Fault Zone is the easternmost fault in the San Andreas Fault system in northern California. The fault is a right-lateral, strike-slip structure considered capable of producing an earthquake of moment magnitude 7. The purpose of this mapping is to better characterize the geology and earthquake hazards associated with the southern part of the Bartlett Springs Fault Zone and to help identify any evidence of active uplift on the faults bounding the Coast Ranges. Although the area immediately surrounding the Bartlett Springs Fault Zone is sparsely populated, its southern segment presents a potential seismic hazard to northern California communities as far away as the San Francisco Bay region and Sacramento. There are also nearby water resources, mineral resources, and public lands used for public recreation. The Coast Ranges of northern California are a series of northwest-southeast-oriented mountain ranges and valleys located north of the San Francisco Bay region, between the Pacific Ocean to the west and the Sacramento Valley to the east. The region has rugged terrain, high mountain peaks that reach more than 2,400 meters above sea level, isolated and narrow valley bottoms on which most human settlements are located, and large drainage systems that tend to follow the northwest-southeast-oriented topographic grain. The physiographic character of the region is shaped by its bedrock geology, deformational history, and active faulting. The basement rocks of the northern Coast Ranges consist of the Franciscan Complex and the Great Valley complex, the latter of which consists of two informal units, the Coast Range ophiolite and the Great Valley sequence. The Franciscan Complex and the Great Valley complex are in structural contact along the Coast Range Fault, a regional-scale structure and fundamental crustal boundary. The Franciscan Complex and the Great Valley complex are superposed by active, northwest-southeast-striking strike-slip faults that are associated with seismicity swarms. These active strike-slip faults can produce moderate to large earthquakes that have moment magnitudes of 7–8. In places, these active structures bound large ranges and valleys, suggesting that much of the modern topographic expression is the result of active deformation processes. This report contains new 1:24,000-scale geologic mapping along the southern part of the Bartlett Springs Fault Zone between Clear Lake and Lake Berryessa. The map area spans 738 square kilometers in northern Napa County, southern Lake County, and parts of Yolo and Colusa Counties. The south and east borders of the map are 90 kilometers north of San Francisco and 70 kilometers west of Sacramento, respectively. The map area is within the Knoxville mining district, which has a history of mercury and gold mining dating back to the mid-19th century. The two main towns in the region, Lower Lake and Clearlake, California, are west-northwest of the map area. Approximately 71,000 people live in the cities and rural communities located within a 40-kilometer radius of the center of the map area. The bedrock geology, cross sections, and structural data presented herein are critical for evaluating the long-term evolution of the Bartlett Springs Fault Zone. This work will supplement studies on local seismic hazards, liquefaction potential, landslide hazards, earthquake geology, natural resources, groundwater resources, engineering geology, and tectonic history by providing the background information for site-specific investigations on these subjects.

California

Preliminary bedrock geologic map of the Port Henry quadrangle, Essex County, New York, and Addison County, Vermont

Introduction The bedrock geology of the 7.5-minute Port Henry quadrangle consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 Ga (giga-annum). In the Port Henry quadrangle, the AMCG metaigneous rocks (Yhg, Ygb, Yanw) intruded older, mostly metasedimentary rocks of the Grenville Complex during the middle to late Shawinigan orogeny (~1,160–1,150 Ma [mega-annum]). All rocks were subsequently metamorphosed to upper amphibolite to granulite facies conditions during the 1,080–1,050 Ma Ottawan orogeny. New mapping reveals four periods of deformation: (1) D1 produced rarely preserved isoclinal folds in the paragneiss and marble and predates AMCG magmatism. (2) Subsequent D2 deformation produced the dominant gneissic fabric preserved in the rock, recumbent folding, and deformed all the Proterozoic units in the map area. Syn- to late-D2 felsic magmatism resulted in the regionally extensive Lyon Mountain Granite Gneiss, which hosts numerous magnetite ore bodies. (3) Mylonitic extensional shear zones and core complex formation marked the beginning of D3 deformation. Protracted D3 deformation resulted in F3 upright folding, dome and basin formation, pegmatite intrusion, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron-ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. (4) D4 created northeast- and northwest-trending local high-grade ductile shear zones and boudinage, northwest-trending regional kilometer (km)-wide ductile shear zones, and crosscutting granitic pegmatite dikes. The development of the late-stage regional shear zones (D4) was likely due to the continuation of extensional doming and uplift from upper amphibolite facies conditions at the end of the Ottawan orogeny. The majority of iron-ore deposits in the Port Henry and adjacent Witherbee quadrangles are in the hanging wall of these extensional shear zones. In the Port Henry quadrangle, the km-wide Cheney Mountain shear zone is the result of D4 deformation. Kilometer-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. The Paleozoic rocks are part of the Early Cambrian to Late Ordovician carbonate bank on the ancient margin of Laurentia. The approximately 1-km-thick Cambrian to Ordovician stratigraphy records a transition from synrift clastics to passive-margin peritidal carbonate buildups to gradually deeper-water subtidal- to shelf-carbonates during foreland basin development associated with the Taconic orogeny. The Paleozoic rocks are weakly folded and block faulted. Large areas of the Champlain Valley are covered by undifferentiated glacial deposits, some of which contain mapped landslides. The map also shows waste rock piles and tailings from historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondacks, provide a context for historical iron mines in the eastern Adirondacks, and update the stratigraphy of the Champlain Valley in New York and Vermont. This Open-File Report includes a bedrock geologic map; a description of map units; a correlation of map units; and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information.

New York, Vermont