SEARCH · Search USGS

Results for “International Journal of Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

USGS2020

Seismicity induced by massive wastewater injection near Puerto Gaitán, Colombia

Seven years after the beginning of a massive wastewater injection project in eastern Colombia, local earthquake activity increased significantly. The field operator and the Colombian Geological Survey immediately reinforced the monitoring of the area. Our analysis of the temporal evolution of the seismic and injection data together with our knowledge of the geological parameters of the region indicate that the surge of seismicity is being induced by the re-injection of produced water into the same three producing reservoirs. Earthquake activity began on known faults once disposal rates had reached a threshold of ∼2 × 10 6 m 3 of water per month. The average reservoir pressure had remained constant at 7.6 MPa after several years of production, sustained by a large, active aquifer. Surface injection pressures in the seismically active areas remain below 8.3 MPa, a value large enough to activate some of the faults. Since faults are mapped throughout the region and many do not have seismicity on them, we conclude that the existence of known faults is not the only control on whether earthquakes are generated. Stress conditions of these faults are open to future studies. Earthquakes are primarily found in four clusters, located near faults mapped by the operator. The hypocentres reveal vertical planes with orientations consistent with focal mechanisms of these events. Stress inversion of the focal mechanisms gives a maximum compression in the direction ENE-WSW, which is in agreement with borehole breakout measurements. Since the focal mechanisms of the earthquakes are consistent with the tectonic stress regime, we can conclude that the seismicity is resulting from the activation of critically stressed faults. Slip was progressive and seismic activity reached a peak before declining to few events per month. The decline in seismicity suggests that most of the stress has been relieved on the main faults. The magnitude of a large majority of the recorded earthquakes was lower than 4, as the pore pressure disturbance did not reach the mapped large faults whose activation might have resulted in larger magnitude earthquakes. Our study shows that a good knowledge of the local fault network and conditions of stress is of paramount importance when planning a massive water disposal program. These earthquakes indicate that while faults provide an opportunity to dispose produced water at an economically attractive volume–pressure ratio, the possibility of induced seismicity must also be considered.

Puerto Gaitan↗

USGS2007

Simultaneous determination of thermal conductivity, thermal diffusivity and specific heat in sI methane hydrate

Thermal conductivity, thermal diffusivity and specific heat of sI methane hydrate were measured as functions of temperature and pressure using a needle probe technique. The temperature dependence was measured between −20°C and 17°C at 31.5 MPa. The pressure dependence was measured between 31.5 and 102 MPa at 14.4°C. Only weak temperature and pressure dependencies were observed. Methane hydrate thermal conductivity differs from that of water by less than 10 per cent, too little to provide a sensitive measure of hydrate content in water-saturated systems. Thermal diffusivity of methane hydrate is more than twice that of water, however, and its specific heat is about half that of water. Thus, when drilling into or through hydrate-rich sediment, heat from the borehole can raise the formation temperature more than 20 per cent faster than if the formation's pore space contains only water. Thermal properties of methane hydrate should be considered in safety and economic assessments of hydrate-bearing sediment.

Geophysical Journal International↗

USGS2004

Determination of the relative uptake of ground vs. surface water by Populus deltoides during phytoremediation

The use of plants to remediate polluted groundwater is becoming an attractive alternative to more expensive traditional techniques. In order to adequately assess the effectiveness of the phytoremediation treatment, a clear understanding of water-use habits by the selected plant species is essential. We examined the relative uptake of surface water (i.e., precipitation) vs. groundwater by mature Populus deltoides by applying irrigation water at a rate equivalent to a 5-cm rain event. We used stable isotopes of hydrogen (D) and oxygen (18O) to identify groundwater and surface water (irrigation water) in the xylem sap water. Pretreatment isotopic ratios of both deuterium and 18O, ranked from heaviest to lightest, were irrigation water > groundwater > xylem sap. The discrepancy in preirrigation isotopic signatures between groundwater and xylem sap suggests that in the absence of a surface source of water (i.e., between rain events) there is an unknown amount of water being extracted from sources other than groundwater (i.e., soil surface water). We examined changes in volumetric soil water content (%), total hourly sapflux rates, and trichloroethene (TCE) concentrations. Following the irrigation treatment, volumetric soil water increased by 86% and sapflux increased by as much as 61%. Isotopic signatures of the xylem sap became substantially heavier following irrigation, suggesting that the applied irrigation water was quickly taken up by the plants. TCE concentrations in the xylem sap were diluted by an average of 21% following irrigation; however, dilution was low relative to the increase in sapflux. Our results show that water use by Populus deltoides is variable. Hence, studies addressing phytoremediation effectiveness must account for the relative proportion of surface vs. groundwater uptake.

International Journal of Phytoremediation↗

USGS1999

Sulfur variability and petrology of the Lower Block Coal Member (Pennsylvanian) in Southwest Indiana

The Lower Block Coal Member (Pennsylvanian-Atokan, Westphalian C) is an economic low-to medium-sulfur, low-ash coal resource in the Illinois Basin. Sulfur content is generally low (averaging 1.0%) in the study area, but varies over short distances. Higher sulfur areas occur as isolated pods and epigenetic pyrite increases significantly in the upper third of the selected columns in higher sulfur areas. Sulfur variations cannot be predicted by typical geologic characteristics such as roof lithology, seam thickness, or seam elevation. Petrographic analysis shows that pyrite is generally associated with brighter microlithotypes, except in higher sulfur areas where infilling pyrite forms are associated with inertite. Higher sulfur areas reflect the water chemistry of the paleomire during and shortly after peat accumulation. Locally, abundant pyrofusinite provided additional pore space for pyrite precipitation.The Lower Block Coal Member (Pennsylvanian-Atokan, Westphalian C) is an economic low- to medium-sulfur, low-ash coal resource in the Illinois Basin. Sulfur content is generally low (averaging 1.0%) in the study area, but varies over short distances. Higher sulfur areas occur as isolated pods and epigenetic pyrite increases significantly in the upper third of the selected columns in higher sulfur areas. Sulfur variations cannot be predicted by typical geologic characteristics such as roof lithology, seam thickness, or seam elevation. Petrographic analysis shows that pyrite is generally associated with brighter microlithotypes, except in higher sulfur areas where infilling pyrite forms are associated with inertite. Higher sulfur areas reflect the water chemistry of the paleomire during and shortly after peat accumulation. Locally, abundant pyrofusinite provided additional pore space for pyrite precipitation.

International Journal of Coal Geology↗

USGS2020

Determination of low concentrations of acetochlor in water by automated solid-phase extraction and gas chromatography with mass-selective detection

A sensitive and reliable gas chromatographic/mass spectrometric (GC/MS) method for determining acetochlor in environmental water samples was developed. The method involves automated extraction of the herbicide from a filtered 1 L water sample through a C 18 solid-phase extraction column, elution from the column with hexane-isopropyl alcohol (3 + 1), and concentration of the extract with nitrogen gas. The herbicide is quantitated by capillary/column GC/MS with selected-ion monitoring of 3 characteristic ions. The single-operator method detection limit for reagent water samples is 0.0015 μg/L Mean recoveries ranged from about 92 to 115% for 3 water matrixes fortified at 0.05 and 0.5 μg\L. Average single-operator precision, over the course of 1 week, was better than 5%.

Journal of AOAC International↗

USGS2002

A 1500-year record of climatic and environmental change in Elk Lake, Clearwater County, Minnesota II: Geochemistry, mineralogy, and stable isotopes

Most of the sediment components that have accumulated in Elk Lake, Clearwater County, northwestern Minnesota, over the past 1500 years are authigenic or biogenic (CaCO3, biogenic SiO2, organic matter, iron and manganese oxyhydroxides, and iron phosphate) and are delivered to the sediment-water interface on a seasonal schedule where they are preserved as distinct annual laminae (varves). The annual biogeochemical cycles of these components are causally linked through the 'carbon pump', and are recapitulated in longer-term cycles, most prominently with a periodicity of about 400 years. Organic carbon is fixed in the epilimnion by photosynthetic removal of CO2, which also increases the pH, triggering the precipitation of CaCO3. The respiration and degradation of fixed organic carbon in the hypolimnion consumes dissolved oxygen, produces CO2, and lowers the pH so that the hypolimnion becomes anoxic and undersaturated with respect to CaCO3 during the summer. Some of the CaCO3 produced in the epilimnion is dissolved in the anoxic, lower pH hypolimnion and sediments. The amount of CaCO3 that is ultimately incorporated into the sediments is a function of how much is produced in the epilimnion and how much is consumed in the hypolimnion and the sediments. Iron, manganese, and phosphate accumulate in the anoxic hypolimnion throughout the summer. Sediment-trap studies show that at fall overturn, when iron-, manganese-, and phosphate-rich bottom waters mix with carbonate- and oxygen-rich surface waters, precipitation of iron and manganese oxyhydroxides, iron phosphate, and manganese carbonate begins and continues into the winter months. Detrital clastic material in the sediments of Elk Lake deposited over the last 1500 years is a minor component (<10% by weight) that is mostly wind-borne (eolian). Detailed analyses of the last 1500 years of the Elk Lake sediment record show distinct cycles in eolian clastic variables (e.g. aluminum, sodium, potassium, titanium, and quartz), with a periodicity of about 400 years. The 400-yr cycle in eolian clastic material does not correspond to the 400-yr cycles in redox-sensitive authigenic components, suggesting that the clastic component is responding to external forcing (wind) whereas the authigenic components are responding to internal forcing (productivity), although both may ultimately be forced by climate change. Variations in the oxygen and carbon isotopic composition of CaCO3 are small but appear to reflect small variations in ground water influx that are also driven by external forcing.

Journal of Paleolimnology↗

USGS2008

Stress tolerance in plants via habitat-adapted symbiosis

We demonstrate that native grass species from coastal and geothermal habitats require symbiotic fungal endophytes for salt and heat tolerance, respectively. Symbiotically conferred stress tolerance is a habitat-specific phenomenon with geothermal endophytes conferring heat but not salt tolerance, and coastal endophytes conferring salt but not heat tolerance. The same fungal species isolated from plants in habitats devoid of salt or heat stress did not confer these stress tolerances. Moreover, fungal endophytes from agricultural crops conferred disease resistance and not salt or heat tolerance. We define habitat-specific, symbiotically-conferred stress tolerance as habitat-adapted symbiosis and hypothesize that it is responsible for the establishment of plants in high-stress habitats. The agricultural, coastal and geothermal plant endophytes also colonized tomato (a model eudicot) and conferred disease, salt and heat tolerance, respectively. In addition, the coastal plant endophyte colonized rice (a model monocot) and conferred salt tolerance. These endophytes have a broad host range encompassing both monocots and eudicots. Interestingly, the endophytes also conferred drought tolerance to plants regardless of the habitat of origin. Abiotic stress tolerance correlated either with a decrease in water consumption or reactive oxygen sensitivity/generation but not to increased osmolyte production. The ability of fungal endophytes to confer stress tolerance to plants may provide a novel strategy for mitigating the impacts of global climate change on agricultural and native plant communities.The ISME Journal (2008) 2, 404-416; doi:10.1038/ismej.2007.106; published online 7 February 2008. ?? 2008 International Society for Microbial Ecology All rights reserved.

ISME Journal↗

USGS2019

A meta-analysis of global crop water productivity of three leading world crops (wheat, corn, and rice) in the irrigated areas over three decades

The overarching goal of this study was to perform a comprehensive meta-analysis of irrigated agricultural Crop Water Productivity (CWP) of the world’s three leading crops: wheat, corn, and rice based on three decades of remote sensing and non-remote sensing-based studies. Overall, CWP data from 148 crop growing study sites (60 wheat, 43 corn, and 45 rice) spread across the world were gathered from published articles spanning 31 different countries. There was overwhelming evidence of a significant increase in CWP with an increase in latitude for predominately northern hemisphere datasets. For example, corn grown in latitude 40–50° had much higher mean CWP (2.45 kg/m³) compared to mean CWP of corn grown in other latitudes such as 30–40° (1.67 kg/m³) or 20–30° (0.94 kg/m³). The same trend existed for wheat and rice as well. For soils, none of the CWP values, for any of the three crops, were statistically different. However, mean CWP in higher latitudes for the same soil was significantly higher than the mean CWP for the same soil in lower latitudes. This applied for all three crops studied. For wheat, the global CWP categories were low (≤0.75 kg/m³), medium (>0.75 to <1.10 kg/m³), and high CWP (≥1.10 kg/m³). For corn the global CWP categories were low (≤1.25 kg/m³), medium (>1.25 to ≤1.75 kg/m³), and high (>1.75 kg/m³). For rice the global CWP categories were low (≤0.70 kg/m³), medium (>0.70 to ≤1.25 kg/m³), and high (>1.25 kg/m³). USA and China are the only two countries that have consistently high CWP for wheat, corn, and rice. Australia and India have medium CWP for wheat and rice. India’s corn, however, has low CWP. Egypt, Turkey, Netherlands, Mexico, and Israel have high CWP for wheat. Romania, Argentina, and Hungary have high CWP for corn, and Philippines has high CWP for rice. All other countries have either low or medium CWP for all three crops. Based on data in this study, the highest consumers of water for crop production also have the most potential for water savings. These countries are USA, India, and China for wheat; USA, China, and Brazil for corn; India, China, and Pakistan for rice. For example, even just a 10% increase in CWP of wheat grown in India can save 6974 billion liters of water. This is equivalent to creating 6974 lakes each of 100 m³ in volume that leads to many benefits such as acting as ‘water banks’ for lean season, recreation, and numerous ecological services. This study establishes the volume of water that can be saved for each crop in each country when there is an increase in CWP by 10%, 20%, and 30%.

International Journal of Digital Earth↗

USGS2018

Applying recreation ecology science to sustainably manage camping impacts: A classification of camping management strategies

Wilderness and other protected natural areas such as national forests, parks, and refuges are managed to provide high-quality recreational opportunities while preserving natural resource conditions. In managing recreation visitation, land managers could allow visitors to create their own infrastructure of trails and campsites, or they could choose to apply an impact management strategy to provide an infrastructure that includes sustainably designed trails and campsites. Recreation ecology studies have repeatedly demonstrated that informal “visitor-created” trails and campsites are generally not sustainably designed or located (Cole 1981, 1982a, 2013; Marion 2016; Wimpey and Marion 2011). For example, informal trails frequently occur in flat terrain where trail widening and muddiness can be chronic problems, or are fall-aligned (perpendicular to contour lines) in sloping terrain, where they are considerably more vulnerable to soil loss and widening (Marion et al. 2016; Marion and Wimpey 2017). Similarly, visitors are highly attracted to flat terrain near water for camping, where they frequently create substantial numbers of large and unnecessary campsites at densities that threaten visitor solitude, experiential qualities, and natural resources.

International Journal of Wilderness↗

USGS1979

Modeling and optimizing a gas-water reservoir: Enhanced recovery with waterflooding

Accepted practice dictates that waterflooding of gas reservoirs should commence, if ever, only when the reservoir pressure has declined to the minimum production pressure. Analytical proof of this hypothesis has yet to appear in the literature however. This paper considers a model for a gas-water reservoir with a variable production rate and enhanced recovery with waterflooding and, using an initial dynamic programming approach, confirms the above hypothesis. ?? 1979 Plenum Publishing Corporation.

Journal of the International Association for Mathe↗

USGS2014

A review of environmental impacts of salts from produced waters on aquatic resources

Salts are frequently a major constituent of waste waters produced during oil and gas production. These produced waters or brines must be treated and/or disposed and provide a daily challenge for operators and resource managers. Some elements of salts are regulated with water quality criteria established for the protection of aquatic wildlife, e.g. chloride (Cl − ), which has an acute standard of 860 mg/L and a chronic standard of 230 mg/L. However, data for establishing such standards has only recently been studied for other components of produced water, such as bicarbonate (HCO 3 − ), which has acute median lethal concentrations (LC50s) ranging from 699 to > 8000 mg/L and effects on chronic toxicity from 430 to 657 mg/L. While Cl− is an ion of considerable importance in multiple geographical regions, knowledge about the effects of hardness (calcium and magnesium) on its toxicity and about mechanisms of toxicity is not well understood. A multiple-approach design that combines studies of both individuals and populations, conducted both in the laboratory and the field, was used to study toxic effects of bicarbonate (as NaHCO 3 ). This approach allowed interpretations about mechanisms related to growth effects at the individual level that could affect populations in the wild. However, additional mechanistic data for HCO 3 − , related to the interactions of calcium (Ca 2 + ) precipitation at the microenvironment of the gill would dramatically increase the scientific knowledge base about how NaHCO 3 might affect aquatic life. Studies of the effects of mixtures of multiple salts present in produced waters and more chronic effect studies would give a better picture of the overall potential toxicity of these ions. Organic constituents in hydraulic fracturing fluids, flowback waters, etc. are a concern because of their carcinogenic properties and this paper is not meant to minimize the importance of maintaining vigilance with respect to potential organic contamination.

International Journal of Coal Geology↗

USGS1987

Relationship between peat geochemistry and depositional environments, Cranberry Island, Maine

The Heath, Great Cranberry Island, Maine, offers a unique locality for studying lateral and vertical relationships between radically different peat types within 1 km 2 . The majority of The Heath is a Sphagnum moss-dominated raised bog. Surrounding the raised bog is a swamp/marsh complex containing grass, sedge, Sphagnum moss, alder, tamarack, and skunk cabbage. Swamp/ marsh-deposited peat occurs both around the margins of The Heath and under Sphagnum -dominated peat, which was deposited within the raised bog. A third peat type, dominated by herbaceous aquatics, is present underlying the swamp/marsh-dominated peat but is not present as a dominant botanical community of The Heath. The three peat types have major differences in petrographic characteristics, ash contents, and associated minerals. Sulfur contents range from a low of 0.19 wt.% (dry) within the raised bog to a high of 4.44 wt% (dry) near the west end of The Heath, where swamp/marsh peat occurring directly behind a storm beach berm has been influenced by marine waters. The presence of major geochemical variations within a 1-km 2 peat deposit suggests the need for in-depth characterization of potential peat resources prior to use.

International Journal of Coal Geology↗

USGS1996

The deethylatrazine/atrazine ratio as an indicator of the onset of the spring flush of herbicides into surface water of the Midwestern United States

The ratio of deethylatrazine to atrazine (DAR) may be used to record the first major runoff of herbicides from non-point-source corn fields to surface water in the Midwestern United States. The DAR dramatically decreases from ∼0.5 to < 0.1 upon application of herbicide and the first major runoff event of a basin. The DAR then gradually increases to values of approximately 0.4–0.6 during the harvest season. Furthermore, the DAR may be used in studies of surface water movement to give a temporal indicator of water moving into reservoirs for possible storage of herbicides. It is hypothesized that deethylatrazine, which accounts for only 6% of the degradation of atrazine, becomes a significant metabolite in surface water (∼ 50% of parent compound) because of its selective removal from soil. This removal process may be an important concept for consideration in studies of herbicide contamination of rivers and reservoirs.

International Journal of Environmental Analytical ↗

USGS2015

U.S. recreational water quality criteria: a vision for the future

This manuscript evaluates the U.S. Recreational Water Quality Criteria (RWQC) of 2012, based upon discussions during a conference held 11–13 March 2013, in Honolulu, Hawaii. The RWQC of 2012 did not meet expectations among the research community because key recommended studies were not completed, new data to assess risks to bathers exposed to non-point sources of fecal indicator bacteria (FIB) were not developed, and the 2012 RWQC did not show marked improvements in strategies for assessing health risks for bathers using all types of recreational waters. The development of the 2012 RWQC was limited in scope because the epidemiologic studies at beach sites were restricted to beaches with point sources of pollution and water samples were monitored for only enterococci. The vision for the future is development of effective RWQC guidelines based on epidemiologic and quantitative microbial risk assessment (QMRA) studies for sewage specific markers, as well as human enteric pathogens so that health risks for bathers at all recreational waters can be determined. The 2012 RWQC introduced a program for states and tribes to develop site-specific water quality criteria, and in theory this approach can be used to address the limitations associated with the measurements of the traditional FIB.

International Journal of Environmental Research an↗

USGS2011

Millennial precipitation reconstruction for the Jemez Mountains, New Mexico, reveals changing drought signal

Drought is a recurring phenomenon in the American Southwest. Since the frequency and severity of hydrologic droughts and other hydroclimatic events are of critical importance to the ecology and rapidly growing human population of this region, knowledge of long-term natural hydroclimatic variability is valuable for resource managers and policy-makers. An October–June precipitation reconstruction for the period AD 824–2007 was developed from multi-century tree-ring records of Pseudotsuga menziesii (Douglas-fir), Pinus strobiformis (Southwestern white pine) and Pinus ponderosa (Ponderosa pine) for the Jemez Mountains in Northern New Mexico. Calibration and verification statistics for the period 1896–2007 show a high level of skill, and account for a significant portion of the observed variance (>50%) irrespective of which period is used to develop or verify the regression model. Split-sample validation supports our use of a reconstruction model based on the full period of reliable observational data (1896–2007). A recent segment of the reconstruction (2000–2006) emerges as the driest 7-year period sensed by the trees in the entire record. That this period was only moderately dry in precipitation anomaly likely indicates accentuated stress from other factors, such as warmer temperatures. Correlation field maps of actual and reconstructed October–June total precipitation, sea surface temperatures and 500-mb geopotential heights show characteristics that are similar to those indicative of El Niño–Southern Oscillation patterns, particularly with regard to ocean and atmospheric conditions in the equatorial and north Pacific. Our 1184-year reconstruction of hydroclimatic variability provides long-term perspective on current and 20th century wet and dry events in Northern New Mexico, is useful to guide expectations of future variability, aids sustainable water management, provides scenarios for drought planning and as inputs for hydrologic models under a broader range of conditions than those provided by historical climate records.

New Mexico↗

USGS2006

Use of the gamma distribution to represent monthly rainfall in Africa for drought monitoring applications

Evaluating a range of scenarios that accurately reflect precipitation variability is critical for water resource applications. Inputs to these applications can be provided using location- and interval-specific probability distributions. These distributions make it possible to estimate the likelihood of rainfall being within a specified range. In this paper, we demonstrate the feasibility of fitting cell-by-cell probability distributions to grids of monthly interpolated, continent-wide data. Future work will then detail applications of these grids to improved satellite-remote sensing of drought and interpretations of probabilistic climate outlook forum forecasts. The gamma distribution is well suited to these applications because it is fairly familiar to African scientists, and capable of representing a variety of distribution shapes. This study tests the goodness-of-fit using the Kolmogorov–Smirnov (KS) test, and compares these results against another distribution commonly used in rainfall events, the Weibull. The gamma distribution is suitable for roughly 98% of the locations over all months. The techniques and results presented in this study provide a foundation for use of the gamma distribution to generate drivers for various rain-related models. These models are used as decision support tools for the management of water and agricultural resources as well as food reserves by providing decision makers with ways to evaluate the likelihood of various rainfall accumulations and assess different scenarios in Africa.

International Journal of Climatology↗

USGS1990

The geology of selected peat-forming environments in temperate and tropical latitudes

We studied peat in several geologic and climatic settings: (1) a glaciated terrain in cold-temperate Maine and Minnesota, U.S.A.; (2) an island in a temperate maritime climate in the Atlantic Ocean off the coast of Maine, U.S.A., where sea level is rising rapidly and changing the environment of peat accumulation; (3) swamps along the warm-temperate U.S. Atlantic and Gulf Coastal Plains, where sea level has changed often, thus creating sites for accumulation; and (4) in a tropical climate along the coast of Sarawak, Malaysia, and the delta of the Batang Hari River, Sumatra, Indonesia (Figs. 1 and 2). With the exception of the deposits on the Atlantic and Gulf Coastal Plains, most of the deposits described are domed bogs in which peat accumulation continued above the surface of the surrounding soil. The bogs of the U.S. Atlantic and Gulf Coastal Plains have almost level surfaces. All domed bogs are not entirely ombrotrophic (watered only from precipitation); multidomed bogs that rise from irregular or hilly surfaces may be crossed by streams that supply water to the bogs. The geologic processes or organic sedimentation, namely terrestrialization and paludification, are similar in all peat deposits considered here. Differences in geomorphology affecting the quantity and that quality of peat that has ash contents of less than 25%, which are desirable for commercial purposes, depend chiefly on: (1) high humidity, which is favorable to luxuriant growth of peat-forming vegetation; (2) a depositional setting that permits extensive accumulation relatively free from inorganic contamination from sea water and streams and from dust and volcanic ash; and (3) a stable regional water table that controls the rate of decomposition under aerobic conditions and protects the deposit against the ravages of fire. Differences in peat textures are due to the type of vegetation and to the degree of decomposition. The rate of decomposition is largely the result of the amount of oxidation and aerobic microbial activity. Stratigraphic distribution of various textures and amounts of inorganic components within a peat deposit is largely determined by the vertical positions occupied by peat-forming environments, such as pond, marsh, swamp and heath where vegetation accumulated, and the depth to zones of unoxygenated water. Peat also differs in the rate of accumulation. On the basis of carbon-14 dating, an estimated 8 m of peat in the tropical Batang Hari River deposit in Sumatra has been accumulating at the rate of about 1.5 m/1,000 yr, whereas peat in the cold-temperate deposit in Maine has been accumulating at the rate of 0.66 m/1,000 yr. Accumulation rates in domed deposits such as these are affected not only by factors controlling volume of biomass and aerobic decay but also by stream erosion and fires that remove peat. Such disconformities (see Fig. 2) within the deposit may be recognized by sudden vertical changes in degree of decomposition and/or the presence of charcoal. The trace-element content of peat deposits is affected by the environments of their settings. Samples of peat that have an ash content of less than 25% dry weight and that are from small, almost level swamp deposits along the Atlantic Coastal Plain of North Carolina were compared with similar samples from small domed bogs in Maine, a glaciated area. Samples from Nort Carolina, which are from deposits in thick fluvial and nearshore marine sediments far from the bedrock source, are generally higher in Ti, Cr and Pb. The Maine samples from deposits in glacial drift close to the bedrock source contain more Zn, Mn, P, Ca, Na and Fe. The kind and amount of trace elements within the deposits appear to relate largely to depositional setting, to kinds of bedrock source, and to the modes of transportation from source to peat swamp. Trace-element concentrations in the extensive Sumatra peat deposit, which represents a potentially commercial coal bed, are similar to those found in Appalachian coals except for As and Au, which are higher in the former. This similarity most likely implies that geochemical controls on mineral matter controlled the concentrations in both. Most peat deposits found in the world today are not precursors of economic coal beds because they are too local in extent, lack beds of commercial-quality peat greater than 6 m thick, and/or are too far from sea level to be rapidly by marine or marginal marine sediments before destruction by erosion and decomposition. However, the two domed deposits in Sarawak and Sumatra described above are parts of extensive, thick, low-sulfur, fuel-quality peat deposits, which have bases below the levels of rivers on coastal deltas. These are likely to be preserved in their lower part and to become precursors of tropical coal seams of potential economic importance. The lenticular and tabular peat deposits of the Atlantic and Gulf Coastal Plains, which have little chance of survival, have features resembling those in Tertiary peat deposits in alluvial settings of western North America. The quality, shape, and extent of modern and ancient peat deposits are controlled by the same factors - humidity, vegetation type, ground- and surface-water regimes, and physiographic and geologic setting. Thus, a study of modern peat deposits may help in studies of the areal distribution and the thickness and quality of ancient coal beds.

International Journal of Coal Geology↗

USGS2020

Nontuberculous mycobacterial disease and molybdenum in Colorado watersheds

Nontuberculous mycobacteria (NTM) are environmental bacteria that may cause chronic lung disease. Environmental factors that favor NTM growth likely increase the risk of NTM exposure within specific environments. We aimed to identify water-quality constituents (Al, As, Cd, Ca, Cu, Fe, Pb, Mg, Mn, Mo, Ni, K, Se, Na, Zn, and pH) associated with NTM disease across Colorado watersheds. We conducted a geospatial, ecological study, associating data from patients with NTM disease treated at National Jewish Health and water-quality data from the Water Quality Portal. Water-quality constituents associated with disease risk were identified using generalized linear models with Poisson-distributed discrete responses. We observed a highly robust association between molybdenum (Mo) in the source water and disease risk. For every 1- unit increase in the log concentration of molybdenum in the source water, disease risk increased by 17.0%. We also observed a statistically significant association between calcium (Ca) in the source water and disease risk. The risk of NTM varied by watershed and was associated with watershed-specific water-quality constituents. These findings may inform mitigation strategies to decrease the overall risk of exposure.

Colorado↗