Search USGSSearch

SEARCH · Search USGS

Results for “Internal Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

Recommended nomenclature for zeolite minerals: Report of the Subcommittee on Zeolites of the International Mineralogical Association, Commission on New Minerals and Mineral Names

This report embodies recommendations on zeolite nomenclature approved by the International Mineralogical Association Commission on New Minerals and Mineral Names. In a working definition of a zeolite mineral used for this review, structures containing an interrupted containing an interrupted framework of tetrahedra are accepted where other zeolitic properties prevail, and complete substitution by elements other than Si and Al is alloowed. Separate species are recognized in topologically distinctive compositional series in which different extra-framework cations are the most abundant in atomic proportions. To name these, the appropriate chemical symbol is attached by a hyphen to the series name as a suffix, except for the names harmotome, pollucite and wairakite in the phillipsite and analcime series. Differences in space-group symmetry and in order-disorder relationships in zeolites having the same topologically distinctive framework do not in general provide adequate grounds for recognition of separate species. Zeolite species are not to be distinguished solely in Si:Al ratio except for heulandite (Si:Al < 4.0) and clinoptilolite (Si:Al ??? 4.0). Dehydration, partial hydration and over-hydration are not sufficient grounds for the recognition of separate species of zeolites. Use of the term 'ideal formula' should be avoided in referring to a simplified or averaged formula of zeolite. Newly recognized species in compositional series are as follows: brewsterite-Sr, -Ba; chabazite-Ca, -Na, -K; clinoptilolite-K, -Na, -Ca; dechiardite-Ca, -Na; erionite-Na, -K, -Ca,; faujasite-Na, -Ca, -Mg; ferrierite-Mg, -K, -Na; gmelinite-Na, -Ca, -K; heulandite-Ca, -Na, -K, -Sr; levyne-Ca, -Na; paulingite-K, -Ca; phillipsite-Na, -Ca, -K stilbite-Ca, -Na. Key references, type locality, origin of name, chemical data, IZA structure-type symbols, space-group symmetry, unit-cell dimensions, and comments on structure are listed for 13 compositional series, 82 accepted zeolite mineral species, and three of doubtful status. Herschelite, leonhardite, svetlozarite and wellsite are discredited as mineral species names. Obsolete and discredited names are listed.

European Journal of Mineralogy

Data from the 2011 International Piping Plover Census

This report provides results from the 2011 International Census of Piping Plovers ( Charadrius melodus ). Distribution and abundance data for wintering and breeding Piping Plovers are summarized in tabular format. An appendix provides census data for every site surveyed in every state, province, and island. The 2011 winter census resulted in the observation of 3,973 Piping Plovers. Expanded coverage outside of the United States led to the discovery of more than 1,000 Piping Plovers wintering in the Bahamas. The breeding census detected 2,771 birds in Atlantic Canada and the Plains, Prairies, and Great Lakes regions of the United States and Canada. Combining the census count with the U.S. Atlantic &ldquo;window census&rdquo; provides a total minimum estimate of 5,723 breeding birds for the species.

Data Series

Data from the 2006 International Piping Plover Census

This report presents the results of the 2006 International Census of Piping Plovers (Charadrius melodus). Two sets of tabular data are reported: one for distribution and abundance of wintering Piping Plovers, the other for distribution and abundance of breeding Piping Plovers. The winter census resulted in the observation of 3,884 Piping Plovers at 546 sites. The breeding census resulted in the observation of 8,092 adult piping plovers at 1,925 sites. An appendix provides census reports for each location surveyed. This report was prepared to meet an immediate need of the U.S. Fish and Wildlife Service for census data for Piping Plovers.

Data Series

International geomagnetic reference field 1980: a report by IAGA Division I working group.

Describes the recommendations of the working group, which suggested additions to IGRF because of the cumulative effect of the inevitable uncertainties in the secular variation models which had led to unacceptable inaccuracies in the IGRF by the late 1970's. The recommendations were accepted by the International Association of Geomagnetism and Aeronomy on August 15, 1981 at the 4th Scientific Assembly, Edinburgh. An extended table sets out spherical harmonic coefficients of the IGRF 1980.-R.House

Geophysical Journal of the Royal Astronomical Soci

The Program for Regional and International Shorebird Monitoring (PRISM)

This report describes the "Program for Regional and International Shorebird Monitoring" (PRISM). PRISM is being implemented by a Canada-United States Shorebird Monitoring and Assessment Committee formed in 2001 by the Canadian Shorebird Working Group and the U.S. Shorebird Council. PRISM provides a single blueprint for implementing the shorebird conservation plans recently completed in Canada and the United States. The goals of PRISM are to (1) estimate the size of breeding population of 74 shorebird taxa in North America; (2) describe the distribution, abundance, and habitat relationships for each of these taxa; (3) monitor trends in shorebird population size; (4) monitor shorebird numbers at stopover locations, and; (5) assist local managers in meeting their shorebird conservation goals. PRISM has four main components: arctic and boreal breeding surveys, temperate breeding surveys, temperate non-breeding surveys, and neotropical surveys. Progress on, and action items for, each major component are described. The more important major tasks for immediate action are carrying out the northern surveys, conducting regional analyses to design the program of migration counts, and evaluating aerial photographic surveys for migration and winter counts.

General Technical Report

Assessment of international reference materials for isotope-ratio analysis (IUPAC Technical Report)

Since the early 1950s, the number of international measurement standards for anchoring stable isotope delta scales has mushroomed from 3 to more than 30, expanding to more than 25 chemical elements. With the development of new instrumentation, along with new and improved measurement procedures for studying naturally occurring isotopic abundance variations in natural and technical samples, the number of internationally distributed, secondary isotopic reference materials with a specified delta value has blossomed in the last six decades to more than 150 materials. More than half of these isotopic reference materials were produced for isotope-delta measurements of seven elements: H, Li, B, C, N, O, and S. The number of isotopic reference materials for other, heavier elements has grown considerably over the last decade. Nevertheless, even primary international measurement standards for isotope-delta measurements are still needed for some elements, including Mg, Fe, Te, Sb, Mo, and Ge. It is recommended that authors publish the delta values of internationally distributed, secondary isotopic reference materials that were used for anchoring their measurement results to the respective primary stable isotope scale.

Pure and Applied Chemistry

The materials flow of mercury in the economies of the United States and the world

Although natural sources of mercury exist in the environment, measured data and modeling results indicate that the amount of mercury released into the biosphere has increased since the beginning of the industrial age. Mercury is naturally distributed in the air, water, and soil in minute amounts, and can be mobile within and between these media. Because of these properties and the subsequent impacts on human health, mercury was selected for an initial materials flow study, focusing on the United States in 1990. This study was initiated to provide a current domestic and international analysis. As part of an increased emphasis on materials flow, this report researched changes and identified the associated trends in mercury flows; it also updates statistics through 1996. In addition to domestic flows, the report includes an international section, because all primary mercury-producing mines are currently foreign, 86 percent of the mercury cell sector of the worldwide chlor-alkali industry is outside the United States, there is a large international mercury trade (1,395 t 1 in 1996), and environmental regulations are not uniform or similarly enforced from country to country. Environmental concerns have brought about numerous regulations that have dramatically decreased both the use and the production of mercury since the late 1980?s. Our study indicates that this trend is likely to continue into the future, as the world eliminates the large mercury inventories that have been stockpiled to support prior industrial processes and products.

Circular

International Ocean Discovery Program Expedition 389 preliminary report: Hawaiian drowned reefs

Our understanding of the mechanisms controlling eustatic sea level and global climate changes has been hampered by a lack of appropriate fossil coral records over the last 500 ky, particularly into and out of the glacial periods. This problem was addressed by International Ocean Discovery Program Expedition 389 by drilling a unique succession of Hawaiian drowned coral reefs now at 110–1300 meters below sea level (mbsl). The four objectives are to investigate (1) the timing, rate, and amplitude of sea level variability to examine cryosphere and geophysical processes, including the assessment of abrupt sea level change events; (2) the processes that determine changes in mean and high-frequency (seasonal–interannual) climate variability from times with different boundary conditions (e.g., ice sheet size, p CO 2 , and solar forcing); (3) the response of coral reef systems to abrupt sea level and climate changes; and (4) the variation through space and time of the subsidence and the volcanic evolution of the island. To achieve these objectives, 35 holes at 16 sites ranging 131.9–1241.8 mbsl were drilled during the expedition. A total of 425 m of core was recovered, comprising reef (83%) and volcanic (17%) material. Average core recoveries were 66%, with numerous intervals characterized by very well preserved mixtures of coralgal and microbialite frameworks with recoveries >90%. Some science-critical shallow sites were not drilled due to a failure to secure permits to operate in Hawaiian state waters. Furthermore, apart from one site the target penetration depths were not achieved. Preliminary radiometric dates indicate that the recovered reef deposits are from 488 to 13 ka in age. The Onshore Science Party took place in February 2024. Cores were CT and hyperspectral scanned and described. Standard measurements were made, and samples were taken for postcruise research. Preliminary assessment of the age and quality of the reef and basalt cores suggest that many of the expedition objectives will be met.

Hawaii

Proceedings of the 2024 Asia-Pacific Wildlife Health Workshop—Collaborating against shared threats

Emerging diseases of wildlife origin are increasingly transboundary (they spread rapidly across geographic regions and across continents). In recent years, examples include the rapid spread of African swine fever across Europe and Asia with negative effects on food security, and the near global spread of highly pathogenic avian influenza which has devastated wildlife populations, caused economic harm, and which threatens public health; consequently, international partnerships and networks are essential to facilitate the sharing of information for improved situational awareness and better preparedness and response. In this regard, the U.S. Geological Survey and the Korea National Institute for Wildlife Disease Control and Prevention have had a long-standing partnership to foster scientific collaboration. A key part of the activities has been annual scientific workshops, which commenced in 2016. The 2024 workshop in Hilo, Hawaii, was the most recent in these series of workshops and included participants from across Asia and the Pacific region, including Thailand, Vietnam, China, Republic of Korea, Japan, Australia, Cook Islands, Fiji, and the United States. The goals of the workshop were: to continue to build the wildlife health community of practice in the Asia-Pacific region and expand the participants to agencies and institutions from other countries in the region; and exchange scientific knowledge among the participants to share best practices, create scientific networks, and build capacity in wildlife health science for the Asia-Pacific region. The themes discussed at the workshop included wildlife health risk management, avian Influenza, African swine fever, climate change and emerging diseases, and international cooperation. This report contains the author-submitted abstracts which provide a summary of the presentations and discussions during the workshop. The aim is to share this information to continue to foster international scientific exchange to protect wildlife health, livestock, and public health from the negative impacts of infectious and noninfectious diseases.

Open-File Report

Strain accumulation in western United States

This review is principally concerned with recent geodetic strain measurements in western United States undertaken by the US Geological Survey as part of the earthquake studies program and, as a consequence, is heavily biased toward the author's own publications. Most of the publications reporting crustal-strain measurements in western United States prior to about 1968 have been compiled in one volume (National Geodetic Survey 1973), and more recent work (with complete bibliographies) is summarized in three successive quadrennial reports to the International Union of Geodesy and Geophysics (Meade 1971, Savage 1975, Thatcher 1979b). The following conventions are employed in this paper: Strain, a dimensionless quantity, is reported in units of 10 6 Extension is taken as positive. To distinguish between engineering and tensor shear strain, we denote the former by γ and quote the units as μr ad, whereas the latter is denoted by e and given the units of μ strain. Uncertainties in all cases are quoted as ± one standard deviation.

California

Population and business exposure to twenty scenario earthquakes in the State of Washington

This report documents the results of an initial analysis of population and business exposure to scenario earthquakes in Washington. This analysis was conducted to support the U.S. Geological Survey (USGS) Pacific Northwest Multi-Hazards Demonstration Project (MHDP) and an ongoing collaboration between the State of Washington Emergency Management Division (WEMD) and the USGS on earthquake hazards and vulnerability topics. This report was developed to help WEMD meet internal planning needs. A subsequent report will provide analysis to the community level. The objective of this project was to use scenario ground-motion hazard maps to estimate population and business exposure to twenty Washington earthquakes. In consultation with the USGS Earthquake Hazards Program and the Washington Division of Geology and Natural Resources, the twenty scenario earthquakes were selected by WEMD (fig. 1). Hazard maps were then produced by the USGS and placed in the USGS ShakeMap archive.

Open-File Report

Environmental presence and persistence of pharmaceuticals: An overview

Emerging contaminants (ECs) in the environment &ndash; that is, chemicals with domestic, municipal, industrial, or agricultural sources that are not commonly monitored but may have the potential for adverse environmental effects &ndash; is a rapidly growing field of research. The use of &ldquo;emerging&rdquo; is not intended to infer that the presence of these compounds in the environment is new. These chemicals have been released into the environment as long as they have been in production or, in the case of hormones and other endogenous compounds, since the rise of animal life. What is emerging is the interest by the scientific and lay communities in the presence of these chemicals in the environment, the analytical capabilities required for detection, and the subtle effects that very small concentrations of these chemicals appear to have on aquatic biota. In December 2006, Environmental Science & Technology devoted an entire special issue (volume 40, number 23) to the topic of ECs, illustrating the increased interest in the subject. Within the EGs, one particular class that has seen a substantial increase in research over the past 10 years is pharmaceuticals and personal-care products (PPCPs). This increased research interest can be demonstrated by several means, including requests for proposals from funding agencies, but the clearest indication of a focused effort to understand the introduction, transformation, and potential health and environmental effects of PPCPs and ECs, in general, is the number of published reports. This increase can be shown by examining six environmental journals that regularly publish PPCP-related papers &ndash; Chemosphere , Environmental Science & Technology , Environmental Toxicology and Chemistry , Science of the Total Environment , Water Research , and Water Science and Technology . In 1998 there were 22 papers published on pharmaceuticals, antibiotics, or drugs in these 6 journals; by 2006, this number increased sixfold to 132 papers (Figure 1.1). This growth can be attributed to a number of factors. The presence of pharmaceuticals in surface-water samples from Europe and the United States was documented in several sentinel papers. These ground-breaking works encouraged other scientists to examine the rivers, streams, lakes, and reservoirs in their regions for such chemicals. In addition, the intense public attention paid to news reports on the environmental detections of these chemicals and possible effects of aquatic life has made this issue visible to the wastewater-treatment, drinking-water treatment, and regulatory communities. This has driven the funding bodies associated with these communities to fund studies or request proposals that address the presence, fate, and effects of PPCPs in aquatic systems. The release of the first comprehensive reconnaissance of pharmaceuticals and other wastewater contaminants in the United States provides an example of the intense media interest in this topic. Within 6 days on online publication of this study, 72 newspapers across the United States had published articles describing the results, either locally written or based on international media syndicate reports. There also was substantial concurrent coverage by local and national radio and television outlets, including the Cable News Network, ABC World News Tonight , and National Public Radio. A substantial fraction of these news stories may be attributable to press releases and media briefings prior to publication. However, the interest by television and print journalists in reporting the results of a peer-reviewed journal article to the general public was motivated by the recognition that describing the presence of PPCPs in water supplies would be of interest to the public. To better convey the results of the study published by Koplin et al. to the public, a separate general-interest fact sheet was published to summarize the important points of the study. Because PPCPs are commonly and widely used by individuals, there is likely a preexisting, personal identification with these compounds that does not occur for the wide range of other organic and inorganic contaminants whose presence in the environment has previously been described. This greater public &ldquo;name recognition&rdquo; makes itself known through the media to the regulatory and technical community and has prompted interest in sponsoring research that defines the composition and concentrations of PPCPs in potential sources and their fate and effects following relase into the environment. Independent of the drivers that potentially fuel the interest in studies of PPCPs, it is clear that PPCP research has grown beyond surface-water studies to examine issues such as: &bull; Presence in other matrices, such as groundwater, landfill leachates, sediments, and biosolids. &bull; Environmental transport and fate in surface water, groundwater, and soils amended with reclaimed water or biosolids. &bull; PPCP source elucidation, such as wastewater treatment plant (WWTP) effluents, confined animal feeding operations (CAFOs), and aquaculture. &bull; Removal during wastewater and drinking-water treatment. &bull; Effects on aquatic ecosystems, terrestrial ecosystems, and human health. The chapters in this book provide an extensive examination of current environmental pharmaceutical research and are divided into three sections: &ldquo;Occurrence and Analysis of Pharmaceuticals in the Environment,&rdquo; &ldquo;Environment Fate and Transformations of Veterinary Pharmaceuticals,&rdquo; and &ldquo;treatment of Pharmaceuticals in Drinking Water and Wastewater.&rdquo; The purpose of this introductory overview chapter is to outline current (2004-2006) knowledge about the presence and concentration of PPCPs as described in the published literature. Previous reviews should be consulted for discussions on pre-2004 publications. Those reviews will provide the reader with a comprehensive introduction to the topic of PPCPs in the environment. This chapter describes the sources of PPCPs and other organic contaminants often associated with human wastewater into the environment, the range of concentrations present in various environmental compartments, and the potential routes of removal/sequestration. An overview of the sources and fate of veterinary pharmaceuticals will be discussed in Chapter 5, &ldquo;Fate and Transport of Veterinary Medicines in the Soil Environment.&rdquo;

Book chapter

A preliminary assessment of the spatial sources of contemporary suspended sediment in the Ohio River basin, United States, using water quality data from the NASQAN programme in a source tracing procedure

Reliable information on catchment scale suspended sediment sources is required to inform the design of management strategies for helping abate the numerous environmental issues associated with enhanced sediment mobilization and off‐site loadings. Since sediment fingerprinting techniques avoid many of the logistical constraints associated with using more traditional indirect measurement methods at catchment scale, such approaches have been increasingly reported in the international literature and typically use data sets collected specifically for sediment source apportionment purposes. There remains scope for investigating the potential for using geochemical data sets assembled by routine monitoring programmes to fingerprint sediment provenance. In the United States, routine water quality samples are collected as part of the US Geological Survey's revised National Stream Quality Accounting Network programme. Accordingly, the geochemistry data generated from these samples over a 10‐year period (1996–2006) were used as the basis for a fingerprinting exercise to assess the key tributary sub‐catchment spatial sources of contemporary suspended sediment transported by the Ohio River. Uncertainty associated with the spatial source estimates was quantified using a Monte Carlo approach in conjunction with mass balance modelling. Relative frequency weighted means were used as an alternative way of summarizing the spatial source contributions, thereby avoiding the need to use confidence limits. The results should be interpreted in the context of the routine, but infrequent nature, of the suspended sediment samples used to assemble geochemistry as a basis for the sourcing exercise. Nonetheless, the study demonstrates how routine monitoring samples can be used to provide some preliminary information on sediment provenance in large drainage basins.

Tennessee, Ohio, West Virginia, Pennsylvania, Indi

Indirect mineral import reliance and provenance

Mineral commodity supply chain analyses rely on international trade data reported by individual countries as quantities of a mineral commodity form imported from (or exported to) a partner. However, export quantities frequently exceed a country’s domestic production, or occur when no production data are reported, suggesting that the trade partner is merely an intermediary in a transshipment. These discrepancies can result in misleading conclusions regarding supply chain vulnerabilities and dependencies. We present a two-stage methodology to reconcile gaps between reported material sources and actual producers. First, we construct trade networks for specific mineral forms, treating production as a type of import to distinguish producing nations from entrepôts. By tracing flows through these networks, we attribute a target country’s imports to original producers via both direct (in a single trade link) and indirect (transferring through intermediaries) pathways. Second, these production-attributed flows are incorporated into multi-stage supply chains to determine the upstream provenance of feedstock for domestic refining and processing. This approach provides a more representative picture of trade reliance. For example, while the United States (U.S.) Geological Survey reports no imports of unwrought antimony metal from Russia in 2022 (U.S. Geological Survey (2025). Mineral Commodity Summaries 2025. 10.3133/mcs2025), our analysis reveals that over 16% of U.S. imports can be traced back to Russian mining through intermediate processing in countries such as China, India, and Vietnam. Additionally, our analysis of the aluminum supply chain shows that while the U.S. is reported as 52% net import reliant on aluminum materials in 2022, it is 100% reliant on foreign bauxite, 7% of which arrived indirectly. This unreported reliance, which is predominantly tied to bauxite mined in Brazil (43%) and Jamaica (28%), highlights our methods ability to capture the supply chain’s dependence on foreign feedstock that may be missing in single-stage trade data.

Mineral Economics

Minimum requirements for publishing hydrogen, carbon, nitrogen, oxygen and sulfur stable-isotope delta results (IUPAC Technical Report)

Stable hydrogen, carbon, nitrogen, oxygen and sulfur (HCNOS) isotope compositions expressed as isotope-delta values are typically reported relative to international standards such as Vienna Standard Mean Ocean Water (VSMOW), Vienna Peedee belemnite (VPDB) or Vienna Cañon Diablo Troilite (VCDT). These international standards are chosen by convention and the calibration methods used to realise them in practice undergo occasional changes. To ensure longevity and reusability of published data, a comprehensive description of (1) analytical procedure, (2) traceability, (3) data processing, and (4) uncertainty evaluation is required. Following earlier International Union of Pure and Applied Chemistry documents on terminology and notations, this paper proposes minimum requirements for publishing HCNOS stable-isotope delta results. Each of the requirements are presented with illustrative examples.

Pure and Applied Chemistry

National Assessment of Shoreline Change: Part 1, Historical Shoreline Changes and Associated Coastal Land Loss Along the U.S. Gulf of Mexico

EXECUTIVE SUMMARY Beach erosion is a chronic problem along most open-ocean shores of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information regarding past and present trends and rates of shoreline movement. There is also a need for a comprehensive analysis of shoreline movement that is consistent from one coastal region to another. To meet these national needs, the U.S. Geological Survey is conducting an analysis of historical shoreline changes along open-ocean sandy shores of the conterminous United States and parts of Hawaii and Alaska. One purpose of this work is to develop standard repeatable methods for mapping and analyzing shoreline movement so that periodic updates regarding coastal erosion and land loss can be made nationally that are systematic and internally consistent. This report on states bordering the Gulf of Mexico (Florida, Alabama, Mississippi, Louisiana, and Texas) represents the first in a series that will eventually include the Atlantic Coast, Pacific Coast, and parts of Hawaii and Alaska. The report summarizes the methods of analysis, interprets the results, provides explanations regarding the historical and present trends and rates of change, and describes how different coastal communities are responding to coastal erosion. Shoreline change evaluations are based on comparing three historical shorelines with a recent shoreline derived from lidar (Light Detection and Ranging) topographic surveys. The historical shorelines generally represent the following periods: 1800s, 1920s-1930s, and 1970s, whereas the lidar shoreline is 1998-2002. Long-term rates of change are calculated using all four shorelines (1800s to lidar shoreline), whereas short-term rates of change are calculated for the most recent period (1970s to lidar shoreline). The historical rates of change presented in this report represent past conditions and therefore are not intended for predicting future shoreline positions or rates of change. Rates of erosion for the Gulf of Mexico region are generally highest in Louisiana along barrier island and headland shores associated with the Mississippi delta. Erosion is also rapid along some barrier islands and headlands in Texas, and barrier islands in Mississippi are migrating laterally. Highest rates of erosion in Florida are generally localized around tidal inlets. The most stable Gulf beaches are along the west coast of Florida where low wave energy and frequent beach nourishment minimize erosion. Some beach segments in Texas have accreted as a result of net longshore drift convergence, and around tidal inlets that have been stabilized by long jetties. Seawalls and riprap revetments were constructed in all the Gulf Coast states as initial community responses to long-term beach erosion. Although some states, such as Florida, still permit shoreline stabilization structures, beach nourishment has become the preferred method of mitigating long-term erosion.

Open-File Report