Search USGS⌕ Search

SEARCH · Search USGS

Results for “Geophysics, Geochemistry, Geosystems”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

220 records · Page 4Linked to original sources
USGS2025

Multi-scale geophysical mapping of the brine and bedrock surfaces along the Dolores River, Paradox Valley, Colorado, December 2023

Total dissolved solids derived from salt dome–sourced brine in the underlying alluvial aquifer substantially increase with distance in the reach of the Dolores River that passes through Paradox Valley in southwestern Colorado. The area has been the site of salinity control operations since the 1990s to reduce salt loading to the downstream Colorado River. Previous airborne and ground/water-based electromagnetic (EM) geophysical data have successfully mapped the top of the brine surface, albeit with relatively coarse near-surface resolution and limited spatial coverage. This present December 2023 study used ground-based high-resolution EM and passive seismic (horizontal-to-vertical spectral ratio, HVSR) tools to map in detail the depth and thickness of the brine zone in the alluvial aquifer (top of the brine down to bedrock contact) in areas immediately surrounding the Dolores River where previous airborne EM (AEM) results indicated brine within 10 m of land surface. Results indicate the deepest bedrock is generally associated with the shallowest brine and local depressions in the collapse breccia (caprock to the Paradox Formation salt) may facilitate vertical migration of brine into the alluvial aquifer. Additionally, the ground-based EM mapping corroborated general patterns in depth to brine that were observed in previous AEM results while also revealing additional detail, including suspected focused brine discharge zones to the Dolores River. A river-based survey wherein EM data, channel depth and river water–specific conductance information were collected augmented these findings and indicated specific areas on both the western and eastern sides of the river where focused brine discharge may occur. This study comprises a large-scale, ground- and water-based geophysical mapping effort, including hundreds of HVSR soundings and 100s of kilometres of EM data, which were successfully translated into digital brine and bedrock surfaces that could be incorporated into groundwater modelling efforts, future well siting or other decision-making.

Colorado↗
USGS2024

Editorial: From cold seeps to hydrothermal vents: Geology, chemistry, microbiology, and ecology in marine and coastal environments

This Research Topic compiles contemporary studies on cold seeps, hydrothermal vents, mud volcanoes, and related seafloor features that are associated with focused fluid emissions and the transfer of carbon, other chemical species, and sometimes heat from the geosphere to the ocean. Because these features sometimes tap fluids and gas originating kilometers below the seafloor, they provide an important window into deep processes that are otherwise inaccessible to scientists. At the shallow portion of their journey, migrating fluids nearing the seafloor contribute to a range of unique biological, physical, and chemical processes within the sediments themselves and at the sediment-water interface. Seafloor fluid emissions play a critical role in global biogeochemical cycles, ocean chemistry, and possibly even climate change. Seafloor leakage points often emit hydrocarbon gases (especially methane and CO 2 ) and are sometimes the loci for deposition of seafloor minerals that have economic value. A burgeoning area of research focuses on natural products generated at these features, seeking compounds with potential pharmaceutical or other applications. Multidisciplinary studies have become routine for characterization of seafloor fluid emission sites, attesting to the inseparability of geologic, physical, chemical, and biological processes in these settings. It is increasingly common for researchers to combine in a single research cruise: subbottom imaging and seafloor mapping; porewater and water column geochemistry and gas sampling; sediment retrieval for lithologic, biostratigraphic, and solid phase analyses; and studies of benthic and subseafloor communities at the microbial to macrofaunal scales. This multidisciplinary approach has the advantage of ensuring the spatial and temporal coincidence of surveys and samples, an important factor at highly dynamic seafloor fluid emission sites. In addition, researchers often use remotely operated vehicles (ROVs), autonomous underwater vehicles (AUVs), or human-occupied vehicles (HOVs) to record video of the seafloor, compile photomosaics, collect targeted samples, and survey with high-resolution geophysical near-seafloor systems, providing a degree of detail about seafloor fluid emission sites that is unprecedented compared to most areas of the deep ocean. While rarer, long-term cabled observatories or shorter-term deployments of portable observatories are also used at some loci for seafloor fluid flux and are particularly helpful for capturing temporal variations at these dynamic features. Here we summarize the Research Topic’s contribution to multidisciplinary seafloor emission studies in the categories of cold seeps, mud volcanoes, and hydrothermal vents. Figure 1 shows the geographic distribution of the studies in this Research Topic and key features referred to in this Introduction.

Frontiers in Earth Science↗
USGS1977

A multi-channel digital telemetry system for low frequency geophysical data

An inexpensive general purpose digital telemetry system for collection of low frequency geophysical data from U.S. Geological Survey instruments (eg. tilt, strain, gravity, creep, water level, radon, magnetic field, resistivity, telluric current, temperature, etc.) has been designed and built. This system provides data for a more general interactive data acquisition, retrieval and analysis system. The field stations are self-contained, battery operated and housed in weather proof containers. Each accepts up to 15 analog data inputs in the range of -5 to +5 volts. The dynamic range is 70db. The units transmit information as FSK (Frequency Shift Keyed) tones onto either a phone line or radio link with up to 150 transmitters sharing one line. The average power consumption is 0.06 nR watts where n is the 1 number of input channels transmitted and R is the sample rate in minutes -1 . The central receiver-recorder unit accepts and decodes the FSK tones and converts, formats and records the digital data together with time information and station identification on IBM combatible magnetic tape. The digital data are also converted and recorded in analog form for visual monitoring.

Open-File Report↗
USGS2025

Multi-scale geophysical imaging of a hydrothermal system in Yellowstone National Park, USA

Little is known about the local plumbing systems that fuel Yellowstone’s famous hot springs, geysers and mud pots. A multi-method, multi-scale geophysical investigation was carried out in the Obsidian Pool Thermal Area (OPTA) to: (i) delineate the lateral extent of the hydrothermal area and associated surface features; (ii) estimate the dimensions of the upflow zone and identify its main controlling structures; (iii) assess fluids circulation pathways from depth to surface. Ground and airborne geophysical data were acquired to connect local and regional scales, from shallow to large depths. Maps of surface electrical resistivity show a strong correlation with hydrothermal features. At in-termediate depths, electrical resistivity permits delineating the upper limit of the upflow zone, while Poisson’s ratio highlights differences in subsurface fluid content. Combining these results with surface observations and topographic information, we speculate that differential mixing of hydrothermal and fresh water could explain the wide diversity of features observed at OPTA. Low electrical resistivity observed at large depths also suggest that a vast upflow zone, controlled by rhyolite flows and conjugate faults, underlies the OPTA. We speculate that hydrothermal fluids rise along fractures and reach the surface in topographic lows to form hydrothermal features. Our results show that synoptic, multi-scale geophysical measurements provide a roadmap for understanding where and how geologic heterogeneity, topography, fluid-gas separation, and the mixing of thermal and meteoric waters conspire to produce the wide variety of Yellowstone’s renowned hydrothermal features.

Wyoming↗
USGS2026

Groundwater spatial variability within an atoll island: Assessing shallow aquifer heterogeneity with geophysical and physicochemical measurements

This study examines the spatial variability of shallow groundwater on Dhigelaabadhoo Island using electromagnetic induction surveys, groundwater monitoring, and sediment analyses. The research reveals how variations in island morphology—such as differences in elevation, reef flat width, and sediment composition—affect the spatial distribution of groundwater lenses and the overall aquifer dynamics. Saltwater intrusion is especially pronounced in low elevated areas, with narrow reef flat plate and areas where higher hydraulic conductivity—driven by the presence of coarser sediments—is observed, whereas regions characterized by finer sediments, higher elevation, and wider reef flat plates tend to support more symmetric and less saline groundwater lenses. The geophysical investigations reveal that tidal oscillations alter groundwater movement by markedly changing water levels and conductivity, thereby underscoring the critical need to account for temporal dynamics in atoll coastal aquifer systems and the importance of integrating tidal dynamics into the aquifer zone. The findings highlight the significant role of intrinsic morphological and external hydrodynamic factors in shaping groundwater distribution on atoll islands, offering critical insights for sustainable freshwater resource management.

Dhigelaabadhoo Island↗
USGS2024

Geophysical characterization of an alkaline‑carbonatite complex using gravity and magnetic methods at Magnet Cove, Arkansas, USA

The Magnet Cove alkaline‑carbonatite complex (MCC), located in the Ouachita Mountains of south-central Arkansas in the United States, hosts an extensive variety of rare rock types and critical mineral resources with physical properties (density and magnetization) that contrast significantly with the sedimentary rocks into which they have intruded. Newly acquired ground-based gravity and magnetic data were used to develop two-dimensional and three-dimensional geophysical models of the Cretaceous-aged Magnet Cove intrusive complex. The models reveal that the MCC: (1) widens out at middle crustal depths to as much 22 km across, and may reach a depth of 20 km; (2) has a total volume (exposed and subsurface) that may be over 800 km 3 ; (3) is likely connected at depth to other intrusions in the Arkansas alkaline province; and (4) has a geometry that is aligned with pre-existing structures such as the Reelfoot rift and the Ouachita orogenic belt, some of which were likely structurally controlled by the Precambrian crystalline basement and the continent-ocean transition zone buried beneath the Ouachita orogen. For the first time, the magnetic models of the MCC account for the presence of strong remanent magnetization. This results in a geophysical workflow necessary to accurately interpret magnetic anomalies over the much larger Arkansas alkaline province, its geologic and structural framework, and critical mineral potential.

Arkansas↗
USGS2024

Preliminary ground and airborne-based geophysical mapping and modelling of an active hydrothermal system at Mammoth Lakes, California

Mammoth Lakes, California hosts a productive hydrothermal system within the seismically active south moat of Long Valley Caldera. Surficial evidence of the shallow hydrothermal system includes discrete zones of tree-kill dispersed between Shady Rest Park and the Casa Diablo Geothermal Power Plant (40 MW), as well as east of the power plant. The tree-kill areas are associated with elevated diffuse CO₂ emissions, heated ground, hydrothermal alteration, diffuse soil H₂S emissions, and gas vents. Previous mapping delineates prominent north and northwest trending structures within the south moat along the southwestern edge of the resurgent dome that may accommodate gas and fluid flow at the Shady Rest Park and Basalt Canyon Tree Kill Areas (SRTKA and BCTKA, respectively). Both tree-kill areas are also located along contacts between resurgent rhyolite, mafic lavas, and surficial deposits which may provide additional pathways for gas and fluid migration in the shallow subsurface. Characterizing structure and lithology using geophysical anomalies is critical to determining primary structural controls on the hydrothermal system and the extent of subsurface alteration at these sites. We conducted ground and airborne-based potential field geophysical surveys to map gravity and magnetic anomalies. These anomalies are then used to model subsurface geology, structure, and hydrothermal alteration. Here we present our preliminary geophysical mapping and modelling results at both tree-kill locations. Gravity and magnetic data suggest complex structural intersections are coincident with heated ground and gas emissions at the SRTKA and BCTKA. Hydrothermal systems are often observed or interpreted to exploit fault intersections which can serve as highly permeable pathways for hydrothermal fluid and gas discharge, enabling economic geothermal energy production. Geophysical mapping and modelling are an effective means of investigating such structural complexity at Mammoth Lakes due to the presence of unidentified and concealed structures.

California↗
USGS2025

Synergy between geology and geophysics in graphite mineral resource assessment

Graphite is designated as a critical mineral by the U.S. Government due to its essential role in modern technology and its vulnerability to supply chain disruption. To evaluate domestic graphite resources, the U.S. Geological Survey (USGS) conducted two airborne electromagnetic (AEM) surveys as part of the Earth Mapping Resources Initiative (Earth MRI) over prospective areas in the southern Appalachians of Alabama and the Seward Peninsula of Alaska. These surveys aimed to refine areas of interest by revealing subsurface electrical resistivity patterns indicative of graphite-bearing rocks. The results of the AEM surveys were integrated with existing geological knowledge and supplemented by field observations to assess the likelihood of undiscovered resources in these regions. This multidisciplinary approach combined geophysical techniques with traditional geological methods, enhancing the understanding of graphite potential in areas that may have been previously overlooked. The findings from this initiative are expected to contribute significantly to the ongoing efforts to secure a reliable domestic supply of graphite, thereby reducing import reliance and supporting national interests in mineral resource management.

Conference Paper↗
USGS2023

Advancing subsurface investigations beyond the borehole with passive seismic horizontal-to-vertical spectral ratio and electromagnetic geophysical methods at transportation infrastructure sites in New Hampshire

The U.S. Geological Survey (USGS), in cooperation with the New Hampshire Department of Transportation (NHDOT), surveyed transportation infrastructure sites using rapidly deployable geophysical methods to assess benefits added to a comprehensive site characterization with traditional geotechnical techniques. Horizontal-to-vertical spectral-ratio (HVSR) passive-seismic and electromagnetic-induction (EMI) methods were applied at 4 sites including a roadway-stream crossing, roadway-bridge rail-trail crossing, commuter-parking expansion, and a railroad-adjacent river-cutbank slope-failure site. Additionally, ground-penetrating-radar (GPR) was used at the slope-failure site. Typically, subsurface geotechnical properties are determined from boring data; however, borings are often spaced hundreds of feet apart, potentially missing important spatial variability between boreholes. Geotechnical site characterization including geophysical surveys helped provide a more accurate characterization by using continuous or near continuous profiling. Three-component ambient noise measured with HVSR methods were used to determine resonance frequency and estimate sediment thickness. The method works when there is a strong shear-wave acoustic impedance contrast (> 2:1) between sediment and bedrock. Sediment thickness estimates from HVSR measurements were combined with boring data to make detailed maps of the bedrock surface altitude. The bulk electrical conductivity of the subsurface was indirectly measured with EMI methods and was used to identify lithologic variations, shallow bedrock, and conductive groundwater. Ground penetrating radar, which transmits pulses of electromagnetic energy into the subsurface and records the amplitude and timing of reflected signals, was used to identify bedding and changes in lithology or water content. By combining geophysical and boring data analyses, transportation projects produced more spatially comprehensive representations of geotechnical subsurface conditions than would be determined using conventional borings alone.

New Hampshire↗
USGS2025

Borehole geophysical time-series logging to monitor passive ISCO treatment of residual chlorinated-ethenes in a confining bed, NAS Pensacola, Florida

In-situ chemical oxidation (ISCO) is a common method to remediate chlorinated ethene contaminants in groundwater. Monitoring the effectiveness of ISCO can be hindered because of insufficient observations to assess oxidant delivery. Advantageously, potassium permanganate, one type of oxidant, provides the opportunity to use its strong electrical signal as a surrogate to track oxidant delivery using time-series borehole geophysical methods, like electromagnetic (EM) induction logging. Here we report a passive ISCO (P-ISCO) experiment, using potassium permanganate cylinders emplaced in boreholes, at a chlorinated ethene contamination site, Naval Air Station Pensacola, Florida. The contaminants are found primarily at the base of a shallow sandy aquifer in contact with an underlying silty-clay confining bed. We used results of the time-series borehole logging collected between 2017 and 2022 in 4 monitoring wells to track oxidant delivery. The EM-induction logs from the monitoring wells showed an increase in EM response primarily along the contact, likely from pooling of the oxidant, during P-ISCO treatment in 2021. Interestingly, concurrent natural gamma-ray (NGR) logging showed a decrease in NGR response at 3 of the 4 wells possibly from the formation of manganese precipitates coating sediments. The coupling of time-series logging and well-chemistry data allowed for an improved assessment of passive ISCO treatment effectiveness.

Florida↗
USGS2023

Active volcanism on the Arabian Shield—Geology, volcanology, and geophysics of northern Harrat Rahat and vicinity, Kingdom of Saudi Arabia

Active volcanic systems pose serious hazards to people and property including inundation and incineration by lava, blanketing by tephra (volcanic ash), exposure to noxious volcanic gases, and damage from shallow earthquakes triggered by ascending molten material (magma). To improve understanding of volcanism and associated seismicity on the western Arabia Plate, the Saudi Geological Survey and the U.S. Geological Survey conducted a multi-year investigation of the northern Harrat Rahat volcanic field adjacent to the city of Al Madīnah al Munawwarah, Kingdom of Saudi Arabia. Project components included creation of a high-resolution digital topographic base; interpretation of eruptive history supported by detailed geologic mapping, paleomagnetism, and abundant high-precision geochronology of volcanic deposits; assessments of eruptive styles and volcanic hazards by physical volcanology; investigation of the origins of magmas in the mantle and of their differentiation in the crust revealed by chemical and isotopic petrology; gravity and magnetotelluric surveys to reveal crustal structures and to search for magma reservoirs; and regional and local seismic tomography and analyses of seismic hazards. Project results are presented in this Professional Paper as chapters written for technical scientific audiences.

Professional Paper↗
USGS2026

Interplay between tectonics and submarine mass transport deposits in Cortes Basin: New high-resolution geophysics in the Outer California Borderland

The Outer California Borderland (OCB) is an active transform plate boundary offshore Southern California, where the relationship between faulting and submarine mass transport deposits (MTDs) remains poorly understood. Onshore paleoseismic data provide high-resolution earthquake records, whereas marine geophysical data capture longer-term histories. Offshore fault systems pose hazards to infrastructure and dense coastal populations, particularly when linked to submarine landslides. We present new high-resolution geophysical data set (cruise SR2303), including bathymetric and CHIRP sub-bottom data integrated with legacy seismic reflection data and chronostratigraphic constraints from ODP Site 1012 to examine Quaternary MTD recurrence and tectonic controls in the Cortes Basin, OCB. Bathymetry shows deformational features, including slide scarps and previously unmapped fault segments with evidence of Holocene activity. CHIRP profiles reveal 10 stacked MTDs in the East Cortes Basin and 8 in the West Cortes Basin, spanning ∼752 ka with an average recurrence of ∼83.6 ± 1 ka. Acoustic imaging shows 7 MTD intervals coinciding with fault offset increments and fault growth suggesting earthquake-triggered mass wasting. A strong association between MTD occurrences and sea-level extremes also supports glacio-eustatic contribution to slope failure. Stratigraphic correlations suggest quasi-synchronous MTDs across the eastern and western areas, likely triggered by larger eathquakes in the Quaternary. Although the identified MTDs occur relatively far from the Southern California coast, they still pose a potential tsunamigenic hazard requiring further assessment. Moreover, if linked to earthquakes along major strike-slip faults, for example, the Ferrelo fault, the MTDs may provide valuable proxies to constrain rupture scenarios and fault connectivity within the understudied OCB.

California↗
USGS2024

Geophysical modeling of a possible blind geothermal system near Battle Mountain, NV

The northeastern portion of the Reese River basin in north-central Nevada is the focus of detailed geophysical and geological studies as part of the INGENIOUS project, which aims to identify new, commercially viable hidden geothermal systems in the Great Basin region of the western U.S. This location, herein referred to as Argenta Rise, occupies a broad (~15km wide) left-step between major range-front fault systems along the northwestern edge of the Shoshone Range and Argenta Rim, with numerous ENE-striking intra-basin faults presumably accommodating sinistral-normal oblique slip across the step-over. Four discrete regions have been identified within the study area that have favorable structural settings for hosting a blind hydrothermal system. However, with no definitive or extensive surface manifestations of an active hydrothermal system (e.g., geysers, steam vents, sinter, etc.), detailed geophysical studies are necessary to resolve subsurface geology and structure, and identify zones of enhanced structural complexity that may promote hydrothermal fluid flow. Hence, we collected high-resolution gravity, MT, and rock property data (density, magnetic susceptibility), and analyzed the recently acquired GeoDAWN aeromagnetic data to characterize potential geothermal resources in this region. Using the new geophysical datasets, we jointly modeled gravity and magnetic data along a series of intersecting 2D profiles that integrated information from recent, local-scale fault mapping. Rock property measurements performed on outcrops and hand samples throughout the study area constrained the models. The MT data were used to construct a 3D resistivity model that highlights the location of inferred alteration and fluids in the subsurface. Combined MT and potential field results reveal which structures may be most important for controlling hydrothermal fluid migration, as well as which geologic units may host hydrothermal fluids. Our gravity derived depth to basement surface coincides well with the base of shallow conductive anomalies, suggesting hydrothermal fluids may be confined to basin fill sediments and volcanics. This work supports our development of 3D geophysical and geologic models that are focused along the western flank of the northern Shoshone Range and aids the process of selecting sites for temperature gradient drilling.

Nevada↗
USGS1976

Non-radiometric borehole geophysical detection of geochemical halos surrounding sedimentary uranium deposits

Roll-type uranium deposits are formed by the concentration of uranium by ground water in geochemical cells. Non-uranium minerals having different solubilities may be deposited ahead of or behind the uranium minerals, forming halos that surround the ore. In addition, oxidizing and reducing environmental conditions may cause zones of mineral alteration to develop beyond the limits of the uranium deposit. Certain physical property anomalies that are commonly associated with halos can be detected by relatively fast and inexpensive borehole geophysical measurements made either in individual holes, or between two adjacent holes. Borehole measurements that have been found to be useful include electrical resistivity, induced polarization, and magnetic susceptibility. Electrical resistivity is increased by the presence of calcite and other cementing minerals that sometimes create permeability barriers in the neighborhood of uranium deposits. Induced polarization (IP) response is increased by sulfide and clay minerals that are commonly found in anomalous concentrations near roll-type deposits. Magnetic susceptibility is usually decreased by the oxidation of magnetite to hematite or limonite in the zone of chemical alteration that is left as a trail behind roll fronts. Borehole measurements of electrical resistivity, induced polarization and magnetic susceptibility were made in the vicinity of a uranium roll-type deposit in south Texas. Results indicate that mineral halos can be detected by borehole measurements made. in wide-spaced drill holes, and that the total amount of drilling needed to find a deposit can be reduced substantially by this exploration approach.

Open-File Report↗
USGS2024

Geophysical characterization of mine influenced groundwater and surface water in the Mayflower section of the Animas River, Bonita Peak Mining District, Silverton Colorado

This report details findings from geophysical investigations to identify possible groundwater - surface water interactions near the Mayflower Section of the Animas River in Silverton, Colorado. The Mayflower Section is a mine influenced Superfund Site in Colorado. This investigation utilized electromagnetic induction (EM or EMI), magnetic, and fiber optic distributed temperature system (FODTS) geophysical methods to measure the bulk earth electrical conductivity, magnetic susceptibility, and temperature of specific surveyed volumes of the earth near the Mayflower Section of the Animas River. These physical parameters are used to understand the groundwater – surface water interactions, which can guide decision makers in their assessment of mine-impacted surface water. This report details the results from characterization and monitoring technologies to provide high data density and continuous monitoring of bulk earth electrical conductivity and temperature in the Mayflower section of the Animas River to identify zones of groundwater – surface water interactions and potential metal loading from mine influenced water. The investigation separated right and left bank characterization for each method and indicates more groundwater is entering from the right bank than the left bank and these predominantly right bank discharges potentially contain metal-rich water compared to the left bank. Results also indicate mineral veins facilitate preferential groundwater discharge to the river due to possible jointing, fractures, and permeability differences sometimes occurring along veins relative to host rock. For example, Boulder Gulch is likely groundwater dominated and may be receive water impacted by Mayflower Impoundments #1 and #2. Additionally, the beaver ponds near Blair Gulch may influence groundwater discharge and Mayflower Impoundment #4 is possibly impacting groundwater and surface water and may be connected to the wetlands to the west of the impoundment. These data could be further analyzed for smaller spatial scale analysis within areas of interest. The identification of these locations along sections of the river likely impacted by mine influenced groundwater potentially entering the Animas River and can be used by site investigators, decision makers, and stakeholders in mitigation decisions and strategies.

Colorado↗
USGS2025

Airborne geophysical analysis to decipher salinization for coastal Louisiana

Coastal Louisiana is known for saltwater intrusion that threatens wetlands, aquifers, and rivers. However, the extent of saltwater intrusion is not well understood. This study develops an innovative framework with airborne electromagnetic (AEM) data to map chloride concentration distributions for wetlands in the Mississippi River deltaic plain and Chenier plain as well as for the Mississippi River Valley alluvial aquifer (MRVA) and Chicot aquifer. Moreover, the framework maps chloride concentrations along the Mississippi River and Atchafalaya River. Key components in the framework include the establishment of resistivity-to-chloride concentration transformation, 3D resistivity architecture building through geostatistics, and the employment of a lithologic model. The transformation functions correlate AEM resistivity data with porewater salinity measurements and groundwater and river chloride samples. The results show that AEM data reliably infers soil water chloride concentrations and correlates well with the distribution of various marsh types. AEM data reveals extensive saltwater presence at depth and near the coast, originating from salt domes and the Gulf of Mexico, respectively. The saltwater upconing pattern in the Chicot aquifer is likely due to excessive groundwater withdrawals. The AEM data also confirms a distinct tongue of saltwater intruding into the Atchafalaya Basin from the Gulf. The AEM data helps to identify faults that are obscured or eroded at the surface, which appear as leaky barriers in the subsurface where dramatic changes in chloride concentration are apparent. Finally, this study uses the AEM data to infer the presence of an extensive seawater wedge in the Mississippi River and Atchafalaya River.

Louisiana↗