SEARCH · Search USGS

Results for “Energy and Fuels”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,656 records · Page 4Linked to original sources

USGS2026

Importance of fish in the diet of Adélie penguins across multiple life stages

Over recent decades, the Adélie penguin ( Pygoscelis adeliae ) population has grown across most of its range, the exception being the northern coast of the western Antarctic Peninsula (WAP). In the Ross Sea, the very large Cape Crozier colony grew to reach ~9% of the global population. Demographic factors driving the Cape Crozier trend have yet to be identified. However, low chick fledging mass - a negative influence in the northern WAP where the diet is mostly less-energy-dense krill - is not showing an effect in the Cape Crozier colony. Previously, we hypothesized that Cape Crozier fledglings, and post-breeding adults, must be finding sufficient higher-quality prey once free of the prey-depleted colony foraging area, with subsequent higher survival. Here we explore penguin diet within and outside the colony foraging area using stable isotope analysis (SIA) of feathers: those grown by post-breeding adults outside the foraging area, prior to moult, compared to those of near-fledged chicks raised on meals obtained within the foraging area. Second, we explore whether a major difference occurs between breeding and post-breeding diet of adults from a small, nearby colony (Cape Royds) that exploits a smaller, little-depleted preyscape. Finally, we compare the results to SIA analyses published by others to explore whether the pre-moult diet of Ross Island adults, mostly foraging within the north-eastern Ross Sea, compares with that of adults nesting in the southern WAP (Bellingshausen Sea coast). At the latter, populations are not decreasing, with diet containing an appreciable contribution of fish. The results confirmed that fish contributed greatly to chick diets at both Ross Island colonies (δ 15 N 10.6–11.4). Once adults were released from central-place foraging, SIA levels (δ 15 N 9.7–12.9) were similar to those of the southern WAP. Foraging on energy-dense fish in coastal Antarctic waters could be one reason Adélie penguins are among the most abundant and therefore most ecologically successful penguin species.

Antarctic Science↗

USGS2024

Quality of groundwater used for domestic supply in the eastern Sacramento Valley and adjacent foothills, California

Summary More than 2 million Californians rely on groundwater from privately owned domestic wells for drinking-water supply. This report summarizes a water-quality survey of domestic and small-system drinking-water supply wells in the eastern Sacramento Valley and adjacent foothills where more than 25,000 residents are estimated to use privately owned domestic wells. Study results show that inorganic and organic constituents in groundwater were present above regulatory (maximum contaminant level, MCL) benchmarks for public drinking-water quality in 8 and 3 percent, respectively, of the aquifer area used for domestic drinking-water supply (herein, “domestic groundwater resources”; fig. 1). The only inorganic constituent detected above regulatory benchmarks was arsenic. The only organic constituent exceeding regulatory benchmarks was the fumigant 1,2,3-trichloropropane (1,2,3-TCP). Three additional organic constituents—the disinfection by-product chloroform, the gasoline oxygenate methyl tert -butyl ether (MTBE), and the solvent tetrachloroethene (PCE)—were detected at low concentrations below one-tenth of regulatory benchmarks in 34, 10, and 10 percent of domestic groundwater resources, respectively. Total dissolved solids (TDS), iron, and manganese exceeded non-regulatory aesthetic guidelines for drinking water in 5, 10, and 26 percent of domestic groundwater resources, respectively. Per- and polyfluoroalkyl substances (PFASs) were detected in 29 percent of domestic groundwater resources,with 5 percent exceeding the recently enacted (April 2024) U.S. Environmental Protection Agency MCLs. Total coliform and enterococci bacteria were detected in 13 and 8 percent of domestic groundwater resources, respectively. Redox sensitive constituents in this study included arsenic, manganese, nitrate, and iron. In the lower elevation portions of the eastern Sacramento Valley study area, reducing conditions in groundwater aquifers promote elevated arsenic, iron, and manganese, and conversely lower concentrations of nitrate. The presence of the volatile organic compound (VOC) 1,2,3-TCP was related to its past history in select agricultural land uses (on orchards or vineyards) in the Sacramento Valley; however, unlike in the San Joaquin Valley where orchards and vineyards are more common, its detection frequency was low (only detected in one well in this study). Chloroform was frequently detected in this study at low levels. Chloroform is a disinfection byproduct commonly found in domestic wells treated by shock chlorination. The solvent PCE is among the most frequently detected VOCs in groundwater, which is primarily related to its long history of use and its persistence in groundwater in oxic conditions. The gasoline oxygenate MTBE was a contaminant introduced to groundwater through atmospheric exchange when it was used as a fuel additive to decrease smog inducing emissions from vehicles. Its occurrence in groundwater at low levels is expected and makes it a potentially useful tracer of relatively recent recharge water being withdrawn from wells. The PFASs are anthropogenic chemicals with hundreds of uses, and they have been incorporated into many different products, processes, and applications worldwide. Like MTBE, the occurrence of PFASs in groundwater may be in part due to atmospheric exchange, but there are several other pathways that contribute PFASs to the environment.

California↗

USGS2025

U.S. Geological Survey global seabed mineral resources

The U.S. Geological Survey (USGS) provides science and data on seabed mineral resources and ecosystems, as well as on the potential hazards associated with extraction. The Nation relies on minerals for infrastructure, technology, manufacturing, and energy production. Critical minerals are essential to the economic and national security of the United States and have a supply chain vulnerable to disruption. For decades, USGS scientific innovation has contributed to the delineation of seabed mineral resources, the mechanisms of seabed mineral formation, and the environmental impacts of resource extraction. Since 1962, the USGS has also led scientific inquiries into the potential for deep sea mining. By providing impartial science on seabed minerals and their environmental setting in the deep oceans, the USGS enables decision-makers to evaluate the best practices for mineral resource development.

Fact Sheet↗

USGS2025

Reaction kinetics and accelerant effects of sulfides in early mature hydrocarbon generation using hydrous pyrolysis

Hydrocarbon generation in organic-rich sediments is influenced by the molecular organic composition and relative abundance of associated minerals. Certain mineral-derived elements act as catalysts and reaction intermediaries, facilitating early-stage hydrocarbon formation in potential source rocks. This study investigated the role of sulfur contributed from pyrite as an accelerant in thermal reaction, focusing on its effects on early maturation and consequent hydrocarbon generation from gilsonite (low-sulfur solid petroleum). Hydrous pyrolysis (HP) experiments were conducted on mixtures of gilsonite and pyrite in varying ratios (1:0.1, 1:0.5, 1:1, 1:2, and 1:10 w/w gilsonite:pyrite) at 320, 350, and 370 °C for 72 h. Untreated and thermally altered residues were analyzed using solid bitumen reflectance (BR o , %), total organic carbon (TOC) content, programmed temperature pyrolysis, scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and X-ray diffraction (XRD) to evaluate the potential accelerant role of pyritic sulfur in hydrocarbon formation. The results show HP residues at 320 and 350 °C with greater pyrite concentrations had higher BR o , while reflectance values were similar in the 370 °C residues, regardless of pyrite concentration, suggesting enhanced reaction at lower thermal conditions. Increasing pyrite content systematically decreased hydrogen index (HI) values while increasing the transformation ratio (TR) and production index (PI), indicating enhanced conversion of organic matter to hydrocarbons with increasing pyrite concentrations. Gas yields increased with pyrite addition, particularly at 350 °C, confirming secondary cracking effects. However, gas production stabilized or declined at higher pyrite loadings (1:10), suggesting alternative reaction pathways such as coke formation. Our data indicate the presence of pyrite lowers the activation energy for thermal cracking, shifting peak experimental hydrocarbon generation temperatures downward by 20–30 °C, with the most pronounced accelerant effects observed at moderate pyrite concentrations (1:0.5 and 1:1). The thermodynamic framework reveals that pyrite stability is influenced by experimental conditions, with pyrrhotite formation favored in the presence of gilsonite due to reduced oxygen fugacity. Pyrite transformation to pyrrhotite, as observed through XRD, SEM-EDS, and predicted by thermodynamic data, further supports the accelerant role of S, as pyrrhotite exhibits a higher hydrogen transfer potential, promoting early oil generation. These findings highlight the importance of pyrite in modulating hydrocarbon generation pathways in organic-rich systems.

Journal of Analytical and Applied Pyrolysis↗

USGS2024

The 3D Elevation Program—Supporting Ohio's economy

Introduction High-quality elevation data are proving to be a resource of great economic value in dealing with many important issues in Ohio. Current and accurate high-resolution elevation data support flood risk management, water quantity and quality assessment, precision farming, conservation planning, impervious-surface modeling, forest and other natural resources management, abandoned mine and geologic hazard assessment, karst mapping, and siting of wellhead pads for horizontal drilling. These data also support coastal zone management, traffic safety and preliminary engineering site-selection studies for transportation infrastructure, solar potential and other renewable energy planning, aviation safety, and identification of features of interest or concern such as archaeological sites and orphan oil and gas wells. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features.

Ohio↗

USGS2024

Thermo-hydrologic processes governing supra-permafrost talik dynamics in discontinuous permafrost near Umiujaq (Québec, Canada)

Widespread supra-permafrost talik formation is currently recognized as a critical mechanism that could accelerate permafrost thaw in the Arctic (e.g., Connon et al. 2018; Farquharson et al. 2022). However, the trajectory of permafrost dynamics following talik formation may prove difficult to predict. Physically-based cryohydrogeologic models provide a powerful tool for understanding processes and factors controlling talik dynamics and, ultimately, how permafrost will respond to climate change. Such models are typically used to represent multiple non-linear processes relevant for groundwater systems in cold regions, such as coupled heat and groundwater movement, including freeze-thaw dynamics and the effects on the surface energy balance and the subsurface thermal and hydraulic properties (Lamontagne-Hallé et al. 2020). Though cryohydrogeologic modeling advances have been made in simulating talik dynamics, few applications have been tested against robust long-term hydrometeorological and subsurface observations.

Quebec↗

USGS2024

Ungulate migrations of the Western United States, volume 4

Broadly distributed across the Western United States, ungulates (hooved mammals) play an important role in ecosystem function by affecting vegetation communities and forming the prey base for large carnivores. Additionally, ungulates provide economic benefits to regional communities through tourism and hunting and hold cultural significance for many Tribal communities. Many ungulates migrate seasonally between distinct summer and winter ranges to take advantage of spatially and temporally variable food sources and avoid threats such as predators and deep snow. Increasingly, these migrations are threatened by the growing human footprint and associated subdivisions, energy development, and increased traffic volume. Efforts to study ungulate populations and conserve their migrations received support in recent years from the U.S. Department of the Interior Secretarial Order No. 3362, which provided Federal support for enhancing habitat quality for ungulates across the Western States. In response to Secretarial Order No. 3362, the U.S. Geological Survey (USGS) established the Corridor Mapping Team, a collaboration among USGS and participating State and Federal wildlife management agencies and numerous Tribal Nations. Together, the Corridor Mapping Team maps ungulate migrations throughout the Western United States in the USGS “Ungulate Migrations of the Western United States” report series. This report (volume 4) details migrations and seasonal ranges from 31 new herds throughout nine Western States. Additionally, this report includes updates to two herds published in previous reports. Including this report, the report series has provided the mapped migrations and seasonal ranges of 182 unique herds and has provided a map-based inventory of the documented ungulate migrations across the Western United States for biologists, managers, policy makers, and conservation practitioners. This report also discusses how the mapping efforts associated with the Corridor Mapping Team can be used to guide management and policy regarding renewable energy development and ungulate disease, specifically chronic wasting disease, in the Western United States.

Arizona, California, Colorado, New Mexico, Nevada,↗

USGS2025

Flow heterogeneity controls dissolution dynamics in topologically complex rocks

Rock dissolution is a common subsurface geochemical reaction affecting pore space properties, crucial for reservoir stimulation, carbon storage, and geothermal energy. Predictive models for dissolution remain limited due to incomplete understanding of the mechanisms involved. We examine the influence of flow, transport, and reaction regimes on mineral dissolution using 29 time-resolved data from 3D rocks. We find that initial pore structure significantly influences the dissolution pattern, with reaction rates up to two orders of magnitude lower than batch conditions, given solute and fluid-solid boundary constraints. Flow unevenness determines the location and rate of dissolution. We propose two models describing expected dissolution patterns and effective reaction rates based on dimensionless metrics for flow, transport, and reaction. Finally, we analyze feedback between evolving flow and pore structure to understand conditions that regulate/reinforce dissolution hotspots. Our findings underscore the major impact of flow arrangement on reaction-front propagation and provide a foundation for controlling dissolution hotspots.

Geophysical Research Letters↗

USGS2025

U.S. Geological Survey—Department of the Interior, Region 11, Alaska—2023–24 biennial science report

Introduction U.S. Geological Survey (USGS) Mission—The USGS national mission is to monitor, analyze, and predict the current and evolving dynamics of complex human and natural Earth-system interactions and to deliver actionable information at scales and timeframes relevant to decision makers. Consistent with the national mission, the USGS in Alaska provides timely and objective scientific information to help address issues and inform management decisions across five interconnected focus areas: Energy and Minerals; Geospatial Mapping; Natural Hazards; Water Quality, Streamflow, and Ice Dynamics; and Ecosystems. The USGS in Alaska consists of approximately 350 scientists and support staff working in 3 Alaska-based science centers. USGS science activities are also initiated by the Cooperative Research Unit and USGS centers outside Alaska. In the last 5 years, USGS research in Alaska has produced many scientific benefits resulting from more than 900 publications. Publications relevant to Alaska can be conveniently searched by keyword through the USGS Publications Warehouse at https://pubs.usgs.gov/.

Alaska↗

USGS2024

Summary of annual repeat magnetotelluric surveys of the Geysers geothermal field

As part of a multi-year project, funded by the California Energy Commission, annual magnetotelluric (MT) surveys have been collected at The Geysers geothermal field in northern California with the goal of measuring temporal changes within the steam field. The repeat surveys started in 2021 and repeated a 2017 survey (Peacock et al., 2020) with further extension to the southern part of the geothermal field. Temporal variations in the MT transfer functions are observed to be spatially coherent and compartmentalized. Mapping residual phase tensor ellipses demonstrates the direction of maximum change is often aligned with existing fracture orientations. Three dimensional inversion of the MT data, using the inversion results from previous years as the starting model, indicates that the steam reservoir has generally become more resistive over time (~10%), suggesting more steam in the field. A few pockets within the steam field have become more electrically conductive over time and are collocated with injection wells, suggesting either more fluid content in those zones, less steam, or more saline fluids.

California↗

USGS2024

Updated three-dimensional temperature maps for the Great Basin, USA

As part of the periodic update of the geothermal energy assessments for the USA (e.g., last update by Williams and others, 2008), a new three-dimensional temperature map has been constructed for the Great Basin, USA. Williams and DeAngelo (2011) identified uncertainty in estimates of conductive heat flow near land surface as the largest contributor to uncertainty in previously published temperature maps. The new temperature maps incorporate new conductive heat flow estimates developed by DeAngelo and others (2023). Predicted temperatures at depth are compared with representative measurements (for conductively dominated conditions), showing good agreement under relatively simple uniform conditions. Inputs included radiogenic heat production for all layers of 1.89 μW/m 3 , effective bulk thermal conductivity of 2.7 W/m/°C for all rocks underlying sedimentary basins, and a previously published (Williams and DeAngelo, 2011) empirically driven estimate of increasing thermal conductivity with depth in sedimentary sequences. The resulting three-dimensional temperature model is published in a USGS data release associated with this manuscript (Burns and others, 2023).

Arizona, California, Idaho, Nevada, Oregon, Utah↗

USGS2024

The impact of source time function complexity on stress drop estimates

Earthquake stress drop—a key parameter for describing the energetics of earthquake rupture—can be estimated in several different, but theoretically equivalent, ways. However, independent estimates for the same earthquakes sometimes differ significantly. We find that earthquake source complexity plays a significant role in why theoretically (for simple rupture models) equivalent methods produce different estimates. We apply time‐ and frequency‐domain methods to estimate stress drops for real earthquakes in the SCARDEC (Seismic source ChAracteristics Retrieved from DEConvolving teleseismic body waves, Vallée and Douet, 2016 ) source time function (STF) database and analyze how rupture complexity drives stress‐drop estimate discrepancies. Specifically, we identify two complexity metrics—Brune relative energy (BRE) and spectral decay—that parameterize an earthquake’s complexity relative to the standard Brune model and strongly correlate with the estimate discrepancies. We find that the observed systematic magnitude–stress‐drop trends may reflect underlying changes in STF complexity, not necessarily trends in actual stress drop. Both the decay and BRE parameters vary systematically with magnitude, but whether this magnitude–complexity relationship is real remains unresolved.

Bulletin of the Seismological Society of America↗

USGS2025

Airborne geophysical efforts for critical mineral systems mapping in the southern Midcontinent, USA

The increasing global demand for critical minerals to support energy and technological advancement has accelerated exploration and research efforts for these essential resources. Since 2019, the United States Geological Survey (USGS) Earth Mapping Resources Initiative (EMRI) has worked to modernize geologic mapping of the Nation to better understand its critical mineral resources. To further this initiative, the USGS has flown a series of high-resolution airborne magnetic and radiometric surveys over large areas of the southern Midcontinent. The surveys cover known critical mineral deposits and areas with the potential to host additional critical minerals based on the presence of one or more overlapping mineral systems. One aspect of EMRI emphasizes close collaboration between the USGS and the Association of American State Geologists, as well as other government and industry partners to leverage geophysical, geological, and geochemical expertise on both regional and local scales. The EMRI high-resolution airborne survey data provide new insights into the geophysical framework of the southern Midcontinent and its critical mineral endowment. Additionally, discoveries made from the data have directed new studies for critical mineral exploration.

southern Midcontinent↗

USGS2024

Recent advances in characterizing the crustal stress field and future applications of stress data: Perspectives from North America

The stress field controls patterns of crustal deformation, including which faults are likeliest to cause earthquakes or transmit fluids. Since the 1950s, maps of maximum horizontal stress ( S Hmax ) orientations have advanced dramatically, and the style of faulting (relative principal stress magnitudes) has recently been mapped in some regions as well. This perspectives paper summarizes developments in characterizing stress orientations and (relative) magnitudes, including new seismic and borehole methods, as well as progress in identifying the causes of stress variations. Despite these advances, adding far more spatiotemporal detail would allow geoscientists to address many of today's key challenges regarding natural hazards, energy development, and geodynamics. In particular, it is critically important to characterize stress heterogeneity at multiple scales while also recognizing the coherent variability of the stress field. The second part of the paper considers how more detailed stress datasets could prove essential to addressing some of the grand questions in geoscience, including deciphering the poorly understood feedbacks between crustal dynamics and surface processes, improving earthquake and eruption forecasts, and determining the origins and shared properties of plate boundaries.

Geological Society, London, Special Publications↗

USGS2025

Modeling interconnected minerals markets with multicommodity supply curves: Examining the copper-cobalt-nickel system

Demand for many of the metals used in the energy transition is expected to grow rapidly. Many of these are by-products, often considered critical because their production responds weakly to prices and is instead tied to the economics of the host mineral. We present a model of prices and production for jointly produced commodities that accounts for interconnectivity between host and by-product markets at the mine level. We demonstrate this method using the copper–cobalt–nickel system, in which approximately 99% of cobalt is a by-product of copper or nickel mining. Our results show that the model more accurately captures the economic benefits of diversified mine outputs than previous approaches. Furthermore, changes in demand drivers for any two commodities produce non-linear effects on production and price. We challenge the prior best-practice assumption that cobalt cannot impact the copper or nickel markets. Recognizing the importance of both copper and cobalt for future electrification, we emphasize that incentivizing the copper industry to reduce cobalt supply risks could inadvertently undermine copper supply.

Nature Communications↗

USGS2025

Introduction to the special section on improving measurements of earthquake source parameters

Earthquake source parameters such as magnitude, seismic moment, source dimension, stress drop, and radiated energy are fundamental to understanding earthquake physics, and are also key ingredients in earthquake ground‐motion modeling, rupture simulation, and statistical seismology. However, the uncertainties in these parameters estimated from the radiated seismic wavefield are large due to variability in approaches, including site and attenuation characterizations, and so estimates for an individual earthquake made by different studies can vary greatly. Estimating spectral source parameters remains a popular topic, due to a combination of their intrinsic importance and their apparent ease of measurement, but also a controversial one, due to many sources of variability and large uncertainty. The available methods coupled with necessary parameter choices and assumptions in the analysis make it challenging for researchers to apply methods or understand the reliability in results or reported source parameters. This Special Section on Improving Measurements of Earthquake Source Parameters showcasing comparisons between methods and studies seeks to alleviate some of these difficulties to help the community identify the important components and trade‐offs of decomposing recorded seismograms into their source, path, and site components.

Bulletin of the Seismological Society of America↗

USGS2024

The SCEC/USGS community stress drop validation study using the 2019 Ridgecrest earthquake sequence

We introduce a community stress drop validation study using the 2019 Ridgecrest, California, earthquake sequence, in which researchers are invited to use a common dataset to independently estimate comparable measurements using a variety of methods. Stress drop is the change in average shear stress on a fault during earthquake rupture, and as such is a key parameter in many ground motion, rupture simulation, and source physics problems in earthquake science. Spectral stress drop is commonly estimated by fitting the shape of the radiated energy spectrum, yet estimates for an individual earthquake made by different studies can vary hugely. In this community study, sponsored jointly by the U. S. Geological Survey and Southern/Statewide California Earthquake Center, we seek to understand the sources of variability and uncertainty in earthquake stress drop through quantitative comparison of submitted stress drops. The publicly available dataset consists of nearly 13,000 earthquakes of M1 to 7 from two weeks of the 2019 Ridgecrest sequence recorded on stations within 1-degree. As a community study, findings are shared through workshops and meetings and all are invited to join at any time, at any interest level.

Seismica↗

USGS2026

A three-dimensional geologic framework model of the northern Great Plains region of Montana, North Dakota, South Dakota, and Wyoming, USA

This report presents a new three-dimensional geologic framework model (GFM) of the northern Great Plains region, encompassing parts of Montana, North Dakota, South Dakota, and Wyoming. The model provides a regionally consistent, geographic information system (GIS)-ready representation of Phanerozoic sedimentary strata, major fault systems, and Precambrian basement geometry across two sedimentary basins and adjacent uplifts. More than 300,000 geologic and geophysical data inputs were synthesized to model 41 stratigraphic horizons and 47 faults, yielding an internally coherent, sealed-volume interpretation of the subsurface. The modeling workflow developed for this study demonstrates an efficient and scalable approach for constructing basin-to regional-scale GFMs in geologically complex and data-variable settings. Although model fidelity varies with data density and quality, the resulting geometry is broadly consistent with 1:500,000-scale geologic mapping and highlights areas where additional geologic study is most needed. The three-dimensional GFM provides a foundational framework to support groundwater, energy, and mineral resource assessments, and offers a transferable methodology for potential future U.S. Geological Survey efforts to build large-area subsurface models in underexplored regions of the United States.

Montana, North Dakota, South Dakota, Wyoming↗