Search USGS⌕ Search

SEARCH · Search USGS

Results for “Energy & Fuels”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
USGS2022

Pathways of productivity and influences on top consumers in forested streams

Forested stream ecosystems involve complex physical and biotic pathways that can influence fish in numerous ways. Consequently, the responses of fish communities to disturbance can be difficult to understand. In this study, we employed a food web model that links biotic (e.g., physiology, predator–prey interactions) and abiotic (e.g., temperature, sunlight) attributes to address fish responses to changes in stream-riparian ecosystems. We modeled responses to food web dynamics in four streams, using scenarios that included responses to riparian disturbance, climate change, and shifts in top consumers. The two consumers we focused on were coastal cutthroat trout ( Oncorhynchus clarkii clarkii ) and sculpin ( Cottus spp., collectively treated as a functional group) . We found the responses to environmental changes varied by fish species and among streams, and that responses were not independent due to exploitative interspecific competition. Simulations based on long-term data indicated that coastal cutthroat trout were responsive to changes in allochthonous resources including terrestrial detritus and invertebrates, whereas sculpin were more responsive to changes to autochthonous resources that included, periphyton and aquatic invertebrates. These results may be, in part, a consequence of species-specific foraging behavior. Trout have a higher propensity to drift feed and therefore receive a substantial subsidy from terrestrial invertebrates, whereas sculpin feed mostly on aquatic insects on the streambed. Simulations of changes in summer temperature and stream discharge suggest decreased biomass of both fish species because of physiological constraints on invertebrate prey which reduce fish foraging opportunities. Exploitative competition also may be important in fish responses: when one fish taxon was removed, the other showed increased biomass. Although the pattern of simulation results was consistent across the four streams, the magnitude of change varied among streams. Streams with food webs fueled by multiple energy sources may be more resilient to changes to riparian forests and climate. Through application of a systems model, we gained insights into pathways of productivity for fish in forested stream ecosystems that provide understanding of processes that influence fish and streams, as well as implications for management of both.

Forest Ecology and Management↗
USGS2011

Abbreviated bibliography on energy development—A focus on the Rocky Mountain Region

Energy development of all types continues to grow in the Rocky Mountain Region of the western United States. Federal resource managers increasingly need to balance energy demands, effects on the natural landscape and public perceptions towards these issues. To assist in efficient access to valuable information, this abbreviated bibliography provides citations to relevant information for myriad of issues for which resource managers must contend. The bibliography is organized by seven large topics with various sup-topics: broad energy topics (energy crisis, conservation, supply and demand, etc.); energy sources (fossil fuel, nuclear, renewable, etc.); natural landscape effects (climate change, ecosystem, mitigation, restoration, and reclamation, wildlife, water, etc.); human landscape effects (attitudes and perceptions, economics, community effects, health, Native Americans, etc.); research and technology; international research; and, methods and modeling. A large emphasis is placed on the natural and human landscape effects.

Idaho;Montana;Wyoming;Utah;Colorado;New Mexico;Ari↗
USGS2011

Reducing cement's CO 2 footprint

The manufacturing process for Portland cement causes high levels of greenhouse gas emissions. However, environmental impacts can be reduced by using more energy-efficient kilns and replacing fossil energy with alternative fuels. Although carbon capture and new cements with less CO 2 emission are still in the experimental phase, all these innovations can help develop a cleaner cement industry.

Private Sector & Development↗
USGS1971

Banquet speech "Man's conquest of energy, its ecological and human consequences"

The world's energy resources suitable for power production are of two classes: (1) various channels of the continuous energy flux from extraterrestrial sources, and from the earth's interior, and (2) chemical, thermal, and nuclear energy stored in the outer part of the lithosphere and in the oceans. The continuous energy influxes are from: solar radiation, 178,000 × 1012 watts; geothermal energy, 32 × 1012 watts; and tidal energy, 3 × 1012 watts. Of the solar energy influx, the only fraction suitable at present for large-scale power production is the approximately 40,000 × 1012 watts expended in evaporation of water and in atmospheric and oceanic circulation. Of this, the world's potential water power is about 2.9 × 1012 watts. A very small fraction of the solar influx, 40 × 1012 watts, is stored chemically by photosynthesis. A minute fraction of this, stored during the geologic past, is the source of the energy of the fossil fuels, coal and petroleum. Tidal power is capable of large-scale development in a small number of coastal localities with a total potential power of about 64,000 megawatts. Of the sources of stored energy, geothermal energy is the least important. Installed capacity by 1970 is about 1,125 electrical megawatts, and the ultimate potential is estimated at about 60,000 megawatts, with a lifetime of probably less than a century. The largest sources of stored energy, other than nuclear, are the fossil fuels. The initial minable world reserves of coal and lignite are estimated to have been about 7.

IEEE Transactions on Nuclear Science↗
USGS2017

U.S. Geological Survey—Energy and wildlife research annual report for 2017

Introduction Terrestrial and aquatic ecosystems provide valuable services to humans and are a source of clean water, energy, raw materials, and productive soils. The Nation’s food supply is more secure because of wildlife. For example, native pollinators enhance agricultural crops, and insect-eating bats provide pest control services worth billions of dollars to farmers annually. Fish and wildlife are also vital to a vibrant outdoor recreation and tourism industry. Recreational activities, such as hunting, shooting, boating, and angling, generated \$1.1 billion in excise taxes paid to State wildlife agencies in 2017. National parks, wildlife refuges, and monuments accounted for $35 billion in economic output and 318,000 jobs nationwide in 2016. Additional economic benefits are generated from the use and enjoyment of wildlife in State-owned lands and waters. Although the United States is rich in natural resources, human activity continues to place new pressures on fish and wildlife and the habitats they rely on. The United States became the world’s top producer of petroleum and natural gas products in 2012, surpassing Russia’s natural gas production levels in 2009 and Saudi Arabia’s petroleum production in 2013. The U.S. Energy Information Administration projects that the demand for liquid fuel, natural gas, and renewable energy will show strong growth in the next 20 years. Wind energy has demonstrated consistent growth since 2007 with now more than 53,000 wind turbines contributing to power grids in 41 States, Guam, and Puerto Rico. Solar energy has seen rapid growth since 2013 and made up nearly one-third of the total electricity generation additions in 2016. Yet as our Nation works to advance energy security and sustain wildlife, some conflicts have surfaced. Impacts of an expanding energy infrastructure include fragmentation and loss of habitat as well as mortality of birds, bats, fish, and other animals from interactions with energy generation facilities. Because energy development can often occur in wildlife habitats, ecological science can help guide project siting and operational decisions to areas that present the lowest risk to wildlife and energy developers. To address these challenges and make the most of new opportunities, the U.S. Geological Survey is producing innovative science to develop workable solutions that can help sustain wildlife and the habitat they rely upon, while allowing informed development.

Circular↗
USGS2020

Energy development and production in the Great Plains: Implications and restoration opportunities

Energy is an integral part of society. The major US energy sources of fossil fuels (coal, oil, natural gas); biofuels (ethanol); and wind are concentrated in grassland ecosystems of the Great Plains. As energy demand continues to increase, mounting pressures will be placed on North American grassland systems. In this review, we present the ecological effects of energy development and production on grassland systems. We then identify opportunities to mitigate these effects during the planning, construction, and production phases by using informed methodology and improved technology. Primary effects during energy development include small- and large-scale soil disturbance and vegetation removal as small patches of grasslands are used to host oil or gas wells, wind turbine pads, associated roadways, and pipelines or through the conversion of large grassland areas to biofuel croplands. Direct habitat loss or habitat fragmentation can affect wildlife directly through increased mortality or indirectly through reduction in habitat quantity and quality. During energy production, air and water quality can be affected through regular emissions or unplanned spills. Energy development can also affect the economy and health of local communities. During planning, energy development and production effects can be reduced by carefully considering effects on grasslands during siting and even by selecting different energy source types. During construction, effects on soil and plant systems can be minimized by eliminating weed populations before disturbance, salvaging and stockpiling topsoil for future revegetation, and harvesting native local seed for postsite restoration. During energy production operations, noise and road traffic reduction plans and atmospheric monitoring will enable more informed mitigation measures. Continued research on energy development effects and mitigation measures is necessary to establish best management practices beneficial to grassland health while providing needed energy for the United States.

Colorado, Illinois, Indiana, Iowa, Kansas, Minneso↗
USGS2005

Screening of polar components of petroleum products by electrospray ionization mass spectrometry

The polar components of fuels may enable differentiation between fuel types or commercial fuel sources. Screening for these components in the hydrocarbon product is difficult due to their very low concentrations in such a complex matrix. Various commercial fuels from several sources were analyzed by flow injection analysis/electrospray ionization/mass spectrometry without extensive sample preparation, separation, or chromatography. This technique enabled screening for unique polar components at very low concentrations in commercial hydrocarbon products. This analysis was then applied to hydrocarbon samples collected from the subsurface with a different extent of biodegradation or weathering. Although the alkane and isoprenoid portion had begun to biodegrade or weather, the polar components had changed little over time. Because these polar compounds are unique in different fuels, this screening technique can provide source information on hydrocarbons released into the environment.

Energy and Fuels↗
USGS2024

The geographic extent of bird populations affected by renewable-energy development

Bird populations are declining globally. Wind and solar energy can reduce emissions of fossil fuels that drive anthropogenic climate change, yet renewable-energy production represents a potential threat to bird species. Surveys to assess potential effects at renewable-energy facilities are exclusively local, and the geographic extent encompassed by birds killed at these facilities is largely unknown, which creates challenges for minimizing and mitigating the population-level and cumulative effects of these fatalities. We performed geospatial analyses of stable hydrogen isotope data obtained from feathers of 871 individuals of 24 bird species found dead at solar- and wind-energy facilities in California (USA). Most species had individuals with a mix of origins, ranging from 23% to 98% nonlocal. Mean minimum distances to areas of likely origin for nonlocal individuals were as close as 97 to >1250 km, and these minimum distances were larger for species found at solar-energy facilities in deserts than at wind-energy facilities in grasslands (Cohen's d = 6.5). Fatalities were drawn from an estimated 30–100% of species’ desingated ranges, and this percentage was significantly smaller for species with large ranges found at wind facilities (Pearson's r = −0.67). Temporal patterns in the geographic origin of fatalities suggested that migratory movements and nonmigratory movements, such as dispersal and nomadism, influence exposure to fatality risk for these birds. Our results illustrate the power of using stable isotope data to assess the geographic extent of renewable-energy fatalities on birds. As the buildout of renewable-energy facilities continues, accurate assessment of the geographic footprint of wildlife fatalities can be used to inform compensatory mitigation for their population-level and cumulative effects.

Conservation Biology↗
USGS2024

Aligning renewable energy expansion with climate-driven range shifts

Fossil fuel dependence can be reduced, in part, by renewable energy expansion. Increasingly, renewable energy siting seeks to avoid significant impacts on biodiversity but rarely considers how species ranges will shift under climate change. Here we undertake a systematic literature review on the topic and overlay future renewable energy siting maps with the ranges of two threatened species under future climate scenarios to highlight this potential conflict.

Nature Climate Change↗
USGS1974

Water demands for expanding energy development

Water is used in producing energy for mining and reclamation of mined lands, onsite processing, transportation, refining, and conversion of fuels to other forms of energy. In the East, South, Midwest, and along the seacoasts, most water problems are related to pollution rather than to water supply. West of about the 100th meridian, however, runoff is generally less than potential diversions, and energy industries must compete with other water users. Water demands for extraction of coal, oil shale, uranium, and oil and gas are modest, although large quantities of water are used in secondary recovery operations for oil. The only significant use of water for energy transportation, aside from in-stream navigation use, is for slurry lines. Substantial quantities of water are required in the retorting and the disposal of spent oil shale. The conversion of coal to synthetic gas or oil or to electric power and the generation of electric power with nuclear energy require large quantities of water, mostly for cooling. Withdrawals for cooling of thermal-electric plants is by far the largest category of water use in energy industry, totaling about 170 billion gallons (644 million m3) per day in 1970. Water availability will dictate the location and design of energy-conversion facilities, especially in water deficient areas of the West.

Circular↗
USGS2005

An approach toward a combined scheme for the petrographic classification of fly ash: Revision and clarification

Hower and Mastalerz's classification scheme for fly ash is modified to make more widely acceptable. First, proper consideration is given to the potential role of anthracite in the development of isotropic and anisotropic chars. Second, the role of low-reflectance inertinite in producing vesicular chars is noted. It is shown that noncoal chars in the fuel can potentially produce chars that have the potential to stretch the limits of the classification. With care, it is possible to classify certain biomass chars as being distinct from coal-derived chars.

Energy and Fuels↗
USGS2023

Geologic energy storage

Introduction As the United States transitions away from fossil fuels, its economy will rely on more renewable energy. Because current renewable energy sources sometimes produce variable power supplies, it is important to store energy for use when power supply drops below power demand. Battery storage is one method to store power. However, geologic (underground) energy storage may be able to retain vastly greater quantities of energy over much longer durations compared to typical battery storage. Geologic energy storage also has high flexibility; many different types of materials can be used to store chemical, thermal, or mechanical energy in a variety of underground settings. The U.S. Geological Survey (USGS) has the capability to research and assess possible domestic geologic energy storage resources to help prepare the United States for the future of renewable energy.

Fact Sheet↗
USGS1999

Intra- and inter-unit variation in fly ash petrography and mercury adsorption: Examples from a western Kentucky power station

Fly ash was collected from eight mechanical and 10 baghouse hoppers at each of the twin 150-MW wall-fired units in a western Kentucky power station. The fuel burned at that time was a blend of many low-sulfur, high-volatile bituminous Central Appalachian coals. The baghouse ash showed less variation between units than the mechanical hoppers. The mechanical fly ash, coarser than the baghouse ash, showed significant differences in the amount of total carbon and in the ratio of isotropic coke to both total carbon and total coke - the latter excluding inertinite and other unburned, uncoked coal. There was no significant variation in proportions of inorganic fly ash constituents. The inter-unit differences in the amount and forms of mechanical fly ash carbon appear to be related to differences in pulverizer efficiency, leading to greater amounts of coarse coal, therefore unburned carbon, in one of the units. Mercury capture is a function of both the total carbon content and the gas temperature at the point of fly ash separation, mercury content increasing with an increase in carbon for a specific collection system. Mercury adsorption on fly ash carbon increases at lower flue-gas temperatures. Baghouse fly ash, collected at a lower temperature than the higher-carbon mechanically separated fly ash, contains a significantly greater amount of Hg.

Energy and Fuels↗
USGS2020

Nanoscale molecular composition of solid bitumen from the Eagle Ford Group across a natural thermal maturity gradient

Microscopic solid bitumen is a petrographically defined secondary organic matter residue produced during petroleum generation and subsequent oil transformation. The presence of solid bitumen impacts many reservoir properties including porosity, permeability, and hydrocarbon generation and storage, among others. Furthermore, solid bitumen reflectance is an important parameter for assessing the thermal maturity of formations with little to no vitrinite. While the molecular composition of solid bitumen will strongly impact associated parameters such as the development of organic matter porosity, hydrocarbon generation, and optical reflectance, assessing the molecular composition of solid bitumen in situ within shale reservoirs can be challenging due to the small grain sizes (often ≤1 μm in diameter) and the inherent heterogeneity of shale formations. Here we employ the recently developed atomic force microscopy based infrared spectroscopy (AFM-IR) technique to investigate solid bitumen molecular composition in situ within shale samples from the Late Cretaceous Eagle Ford Group. These samples possess sulfur-rich type II kerogens that span a natural thermal maturity gradient from early oil generation to the dry gas window. The application of AFM-IR allows for the rapid collection of thousands of compositional measurements from solid bitumen with ∼50 nm resolution. Our results indicate that (i) solid bitumen from the lower Eagle Ford displays both intra- and intergranular variation in the relative abundance of CH 2 , C═C, and C═O moieties present; (ii) this molecular variation tends to, but does not always, decrease with an increase in thermal maturity; and (iii) the solid bitumen composition between samples, from an atomic ratio perspective, is more similar than analysis of bulk kerogen isolates would indicate. These findings are discussed with perspective toward understanding the impact of thermal stress on the composition of secondary organic matter within the Eagle Ford Shale and highlight the growing awareness that organic matter heterogeneity within petroliferous mudrocks extends down to the nanoscale regime.

Energy and Fuels↗
USGS2022

Permeability measurement and prediction with nuclear magnetic resonance analysis of gas hydrate-bearing sediments recovered from Alaska North Slope 2018 Hydrate-01 Stratigraphic Test Well

Permeability of porous media, such as oil and gas reservoirs, is the crucial material parameter for predicting their hydraulic behavior. A nuclear magnetic resonance (NMR) analyzer is widely used as a powerful tool to predict permeability of various media. NMR T 2 (transverse or spin–spin) relaxation time distribution, which is related to pore size distribution, gives the information to allow calculation of effective (initial) permeability. In this study, we investigate effective, intrinsic (absolute), and relative water and gas permeabilities of hydrate-bearing pressure core samples. These samples were recovered from the Alaska North Slope 2018 Hydrate-01 Stratigraphic Test Well by sidewall pressure coring and then analyzed in a laboratory using both fluid flow test and NMR analyzer. The peak of the NMR T 2 distribution was measured at 10–20 ms using a laboratory NMR analyzer, which compares well with in situ measurements obtained via logging while drilling NMR data for two samples with high gas hydrate saturations ( S h = 76% and 74%). Further, comparison of laboratory NMR T 2 distribution after hydrate dissociation revealed that the hydrate existed in large pore spaces. Effective permeabilities predicted by the Timur-Coates (TC) model and the Schlumberger-Doll-Research (SDR) model, with T 2 cutoff 33 ms, were about an order of magnitude less than the laboratory measured values. Alternative TC model-based calculations with the T 2 cutoff reduced to 10 ms and a newly developed hydraulic radius model better matched the laboratory data. For the analysis of the intrinsic permeabilities, the TC model with a T 2 cutoff of 33 ms and SDR model were greater than the laboratory derived values, while the hydraulic radius model more closely matched the laboratory-derived values. In addition, permeability measurements were also made relative to gas and water under constant three-phase flow (water–gas–hydrate) conditions. After hydrate dissociation, a relative permeability curve was developed for each of the analyzed core samples based on the Corey petrophysical model. The results indicate that the gas permeability changed rapidly at high water saturation around 90%. Thus, we infer that the selection of relative reservoir parameters should focus on the higher water saturation conditions.

Alaska↗
USGS2022

Planning and operations of the Hydrate 01 Stratigraphic Test Well, Prudhoe Bay Unit, Alaska North Slope

The National Energy Technology Laboratory, the Japan Oil, Gas and Metals National Corporation, and the U.S. Geological Survey are leading an effort to conduct an extended gas hydrate production test in northern Alaska. The proposed production test required the drilling of an initial stratigraphic test well (STW) to confirm the geologic conditions of the proposed test site. This well was completed in January 2019 in cooperation with the Prudhoe Bay Unit Working Interest Owners. The Prudhoe Bay Unit Hydrate-01 STW was spudded on 10-December-2018. Downhole data acquisition was completed on 25-December-2018, and the rig was released on 01-January-2019. The Hydrate-01 STW was drilled in two sections, including the surface hole that was drilled to a depth of 2248 ft measured depth (MD) (685 m MD) and cased, and the production hole section that was drilled to a depth of 3558 ft MD (1084 m MD) and also cased. A thermally chilled mineral-oil-based mud was used in the main (production) hole section of the well to maintain wellbore stability and quality of the wellbore acquired data. The primary wellbore data were acquired using logging-while-drilling tools. A sidewall pressure core system was also deployed to gather grain size and other data needed for the design of the future production test wells. In addition to confirming the geologic conditions at the test site, the Hydrate-01 STW was designed to serve as a monitoring well during future field operations. Therefore, two sets of fiber-optic cables, each including a bundled distributed acoustic sensor (DAS) and a distributed temperature sensor (DTS), were clamped to the outside of the production casing and cemented in place. In March 2019, the project team acquired three-dimensional (3D) DAS vertical seismic profiling data in the Hydrate-01 STW. Temperature surveys were also acquired with the DTS as deployed in the Hydrate-01 STW during the completion of the well and nearly continuously since March-2019.

Alaska↗
USGS2022

Gas hydrate saturation estimates, gas hydrate occurrence, and reservoir characteristics based on well log data from the hydrate-01 stratigraphic test well, Alaska North Slope

The Hydrate-01 Stratigraphic Test Well was drilled at the Kuparuk 7-11-12 site on the Alaska North Slope in December 2018. Sonic log data provide compressional (P) and shear (S) slowness from which we determine gas hydrate saturation ( S gh ) estimates using effective medium theory. The sonic S gh estimates compare favorably with S gh estimated from resistivity and nuclear magnetic resonance (NMR) logs, showing that gas hydrate occupies up to approximately 90% of the pore space in the target reservoir sands. The informally named B1 sand (2294 feet below mean sea level) shows lower V P / V S ratios than the D1 sand (2770 feet below mean sea level), with the lower part of the B1 sand showing lower V P / V S ratios than the upper part of the B1 sand. This corresponds to a stiffer, or more “cemented”, behavior for the lower B1 sand and less cemented behavior for the D1 sand. This trend could be due to differences in the reservoirs themselves or in the gas hydrate morphology or to both factors. We observe that the presence of gas hydrate in the upper B1 sand has greater impact on hydraulic permeability (measurements suggest a greater difference between intrinsic and effective permeability) than in the D1 sand, possibly related to gas hydrate morphology but more likely due simply to higher gas hydrate saturations in the upper B1 sand. Analyses of S gh relative to porosity, shale fraction, and intrinsic permeability show that reservoir quality (as represented by these three metrics) exerts control on gas hydrate saturation. Grain size and mineralogy data show somewhat smaller grains and better sorting in the D1 reservoir relative to the upper B1 reservoir and smaller grains and greater clay fraction in the lower B1 reservoir relative to the other two reservoir zones. Together, these data suggest that reservoir characteristics play a role in the observed V P / V S patterns, but gas hydrate morphology (possibly varying with saturation) must also be considered.

Alaska↗