SEARCH · Search USGS

Results for “Cretaceous Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

USGS2012

Reflections from midcrustal rocks within the Mesozoic subduction complex near the eastern Aleutian Trench

Seismic reflection data collected in 1973 by Western Geophysical Company show that highly reflective rocks make up the midcrust of the convergent margin adjacent to the eastern Aleutian Trench. These rocks form an arch that strikes obliquely across the strongly expressed northeast-southwest structural grain of exposed Mesozoic rocks. In an earlier report we proposed that the deep events mark the location of either the presently subducting plate or the top of underplated rocks. However, the short radius of curvature of this arch precludes the possibility that the deep events indicate the igneous oceanic crust. Instead, the deep reflections could be from underplated rocks that have been arched by the imbrication or underplating of strata below the reflective rocks. High-amplitude water layer and interbed multiples prevent precise connection of shallow and deep geology. For example, the Border Ranges fault, a suture between major tectonostratigraphic terranes, is not revealed on any of our seismic sections. We speculate, however, that one band of reflections that rises toward but does not reach the surface is from the Eagle River thrust fault, which separates Late Cretaceous melange from deformed turbidite sequences of the same age.

Journal of Geophysical Research Solid Earth↗

USGS2007

Cretaceous oblique detachment tectonics in the Fosdick Mountains, Marie Byrd Land, Antarctica

The Fosdick Mountains form an E-W trending migmatite dome in the northern Ford Ranges of Marie Byrd Land, Antarctica. Pervasively folded migmatites derived from lower Paleozoic greywacke and middle Paleozoic plutonic rocks constitute the dome. New field research documents a transition from melt-present to solid-state deformation across the south flank of the dome, and a mylonitic shear zone mapped for 30 km between Mt. Iphigene and Mt Richardson. Kinematic shear sense is dextral normal oblique, with top-to-the-SW and -WSW transport. A U-Pb age of 107 Ma, from a leucosome-filled extensional shear band, provides a meltpresent deformation age, and a U-Pb age of 96 Ma, from a crosscutting granitic dike, gives a lower age limit for deformation. The shear zone, here named the South Fosdick detachment zone, forms the south flank of the migmatite dome and was in part responsible for the exhumation of mid-crustal rocks.

Open-File Report↗

USGS1979

Structure and development of the Southeast Georgia Embayment and northern Blake Plateau: Preliminary analysis

Multichannel seismic reflection profiles from the Southeast Georgia Embayment and northern Blake Plateau show reflectors that have been correlated tentatively with horizons of known age. The top of the Cretaceous extends smoothly seaward beneath the continental shelf and Blake Plateau, unaffected at the present shelf edge. A reflector inferred to correspond approximately to the top of the Jurassic section onlaps and pinches out against rocks below. A widespread smooth reflector probably represents a volcanic layer of Early Jurassic age that underlies only the northwestern part of the research area. A major unconformity beneath the inferred volcanic layer is probably of Late Triassic or Early Jurassic age. This unconformity dips rather smoothly seaward beneath the northern Blake Plateau, but south of a geological boundary near 31°N, it has subsided much more rapidly, and reaches depths of more than 12 km. Development of the continental margin north of the boundary began with rifting and subsidence of continental basement in the Triassic. An episode of volcanism may have been due to stresses associated with a spreading center jump at about 175 million years ago. Jurassic and Cretaceous deposits form an onlapping wedge above the inferred early Jurassic volcanics and Triassic sedimentary rocks. During Cenozoic times, development of Gulf Stream flow caused a radical decrease in sedimentation rates so that a shelf that was much narrower than the Mesozoic shelf was formed by progradation against the inner edge of the stream. South of the 31°N geological boundary, the basement probably is semi-oceanic and reef growth, unlike that in the area to the north, has been very active at the outer edge of the plateau.

Blake Plateau, Southeast Georgia Embayment↗

USGS1996

Equatorial origin for Lower Jurassic radiolarian chert in the Franciscan Complex, San Rafael Mountains, southern California

Lower Jurassic radiolarian chert sampled at two localities in the San Rafael Mountains of southern California (∼20 km north of Santa Barbara) contains four components of remanent magnetization. Components A , B ′, and B are inferred to represent uplift, Miocene volcanism, and subduction/accretion overprint magnetizations, respectively. The fourth component ( C ), isolated between 580° and 680°C, shows a magnetic polarity stratigraphy and is interpreted as a primary magnetization acquired by the chert during, or soon after, deposition. Both sequences are late Pliensbachian to middle Toarcian in age, and an average paleolatitude calculated from all tilt-corrected C components is 1° ± 3° north or south. This result is consistent with deposition of the cherts beneath the equatorial zone of high biologic productivity and is similar to initial paleolatitudes determined for chert blocks in northern California and Mexico. This result supports our model, in which deep-water Franciscan-type cherts were deposited on the Farallon plate as it moved eastward beneath the equatorial productivity high, were accreted to the continental margin at low paleolatitudes, and were subsequently distributed northward by strike-slip faulting associated with movements of the Kula, Farallon, and Pacific plates. Upper Cretaceous turbidites of the Cachuma Formation were sampled at Agua Caliente Canyon to determine a constraining paleolatitude for accretion of the Jurassic chert sequences. These apparently unaltered rocks, however, were found to be completely overprinted by the A component of magnetization. Similar in situ directions and demagnetization behaviors observed in samples of other Upper Cretaceous turbidite sequences in southern and Baja California imply that these rocks might also give unreliable results.

Journal of Geophysical Research B: Solid Earth↗

USGS2021

Exploring basin-scale relations and unsupervised classification to quantify and automate the definition of assessment units in USGS continuous oil and gas resource assessments

The U.S. Geological Survey (USGS) assesses potential for undiscovered, technically recoverable oil and gas resources in priority geologic provinces and quantifies resource volume estimates within subdivisions called assessment units (AUs). AU boundaries are defined by USGS geologists using quantitative and qualitative geologic information. Variables contained in IHS Markit’s well and production databases can quantify and/or function as proxies for many of the qualitative, boundary-defining variables. This research explores a new approach to determine AU boundaries and the potential to automate their definition, using data analytics and machine learning algorithms on key, qualitative variables within the IHS Markit databases. Well and production data from the U.S. onshore Gulf Coast region for the Upper Cretaceous Eagle Ford Group and Austin Chalk are used in this analysis because each is relatively geologically uniform in Texas and both have recently been assessed by the USGS. The Eagle Ford is an example of an in situ continuous oil and gas accumulation, and the overlying Austin Chalk is an example of a combined conventional and continuous resource, sourced from the underlying Eagle Ford. Wellspecific values were extracted or calculated from data in IHS Markit’s well and production databases for depth to top and base of the formations, formation thickness, bottom-hole temperature, temperature gradient, temperature at base of formation, cumulative oil and gas production values, barrels of oil equivalent, oil and gas gravities, mud weights from initial well test, depth pressure ratio, and excess pressure. A raster for each variable was interpolated using the natural neighbor technique from the spatial analyst toolbox in ArcGIS. Rasters were then transformed using minimum-maximum scaling, which rescales the distribution to the range of 0–1. Clustering was completed using the iso cluster unsupervised classification tool on the normalized rasters. Raster cell groupings from two to ten were explored, with initial results demonstrating that four to six classes return the most differentiable groups, with depth to formation, oil gravity, pressure, and temperature variables containing the greatest between-group differences. Modeled clusters have spatial similarities to the geologically defined AUs, with indication that temperature and pressure are the most fundamental to AU definition. Input from geologists will remain crucial for further dividing clusters and defining final AUs, since AUs are defined by both qualitative and quantitative information; however, this research documents promising cluster modeling results for the automation of initial AU definitions.

Louisiana, Mississippi, Texas↗

USGS2009

Geochemical data for samples collected in 2008 near the concealed pebble porphyry Cu-Au-Mo deposit, Southwest Alaska

In the summer of 2007, the U.S. Geological Survey (USGS) began an exploration geochemical research study over the Pebble porphyry copper-gold-molybdenum deposit. This report presents the analytical data collected in 2008. The Pebble deposit is world class in size, and is almost entirely concealed by tundra, glacial deposits, and post-Cretaceous volcanic rocks. The Pebble deposit was chosen for this study because it is concealed by surficial cover rocks, is relatively undisturbed (except for exploration company drill holes), is a large mineral system, and is fairly well-constrained at depth by the drill hole geology and geochemistry. The goals of this study are to 1) determine whether the concealed deposit can be detected with surface samples, 2) better understand the processes of metal migration from the deposit to the surface, and 3) test and develop methods for assessing mineral resources in similar concealed terrains. The analytical data are presented as an integrated Microsoft Access 2003 database and as separate Excel files.

Alaska↗

USGS2019

Variability in results from mineralogical and organic geochemical interlaboratory testing of U. S. Geological Survey shale reference materials

The expansion of unconventional petroleum resource exploration and production in the United States has led to an increase in source rock characterization efforts, particularly related to bulk organic and mineralogical properties. To support the analytical and research needs of industry and academia, as well as internal work, the U.S. Geological Survey (USGS) has collected and prepared shale geochemical reference materials (GRMs) from several major shale petroleum systems in the U.S. The sources of these materials are the Late Cretaceous Boquillas (lower Eagle Ford-equivalent) Formation (roadcut near Del Rio, TX), Late Cretaceous Mancos Shale (outcrop near Delta, CO), Devonian–Mississippian Woodford Shale (outcrop near Ardmore, OK), Late Cretaceous Niobrara Formation (quarry near Lyons, CO), Middle Devonian Marcellus Shale (creek bed in LeRoy, NY), and Eocene Mahogany zone oil shale of the Green River Formation (oil shale mine near Rifle, CO). Of particular interest in the development of these GRMs has been the examination of variability between laboratories and specific methods or instruments in commonly made measurements, including major- and trace-element concentrations, X-ray diffraction (XRD) mineralogy, total organic carbon (TOC) content, and programmed pyrolysis (PP) parameters. For the component concentrations and parameters we measured, the techniques and instrument types included: (1) elemental analysis by X-ray fluorescence, inductively coupled plasma mass spectrometry, and instrumental neutron activation analysis; (2) XRD mineralogy with various preparatory methods (spray drying or micronizing with or without internal standard); (3) TOC by combustion with infrared detection after carbonate removal or the PP approach; (4) PP by Rock-Eval 2 or more recently developed instruments (Rock-Eval 6, Source Rock Analyzer or SRA, and Hydrocarbon Analyzer With Kinetics or HAWK). Overall, the results showed that the selected shales cover a wide range of source rock organic and mineralogical properties. Major- and trace-element chemistry results showed low heterogeneity consistent with other USGS GRMs. Comparison of TOC results showed coefficients of variation (COV) of around 5% and the most consistent organic geochemical results between different laboratories and methods. Arguably the most relevant PP measurement, S2 or kerogen hydrocarbon-generating potential (mg-HC/g-rock), showed a somewhat wider range of variability than TOC (COV ~10%), but was consistent between the three modern instruments and the industry-standard Rock-Eval 2. Major phase mineralogy (mineral concentrations ≥10 wt. %, organic-free basis) were comparable between laboratories, but variability in minor phase identification and quantification was observed. Utilization of these shale GRMs as quality control samples and testing materials is expected to help support analytical and experimental efforts in the continued development of unconventional petroleum resources.

Colorado, Texas, Oklahoma↗

USGS2012

Tectonic setting of the Yukon-Koyukuk basin and its borderlands, western Alaska

The Yukon-Koyukuk basin of western Alaska is composed of an arcuate belt of Jurassic and Early Cretaceous subduction-related volcanic and plutonic rocks (Koyukuk terrane) flanked by deep subbasins filled with mid-Cretaceous terrigenous sedimentary rocks. The basin is bordered on three sides by metamorphosed Proterozoic and Paleozoic continental rocks (Seward, Arctic Alaska, and Ruby terranes) and is separated from the metamorphic borderlands by a narrow, highly tectonized belt of oceanic crust and mantle rocks (composite Angayucham-Tozitna terrane). The oceanic and mantle rocks, which dip inward beneath the basin and are thrust outward onto the borderlands, are divided into three separate thrust panels: (1) a structurally lowest panel (Slate Creek) composed of phyllite and metagraywacke of probable Devonian age, (2) a middle panel (Narvak) composed of imbricated basalt, chert, and gabbro of Devonian to Early Jurassic age, and (3) a structurally highest panel (Kanuti) composed of gabbro and peridotite of probable Middle and Late Jurassic age. The three thrust panels appear to represent a reversely stacked sequence that progresses from continental slope deposits in the lower panel to cumulus and mantle peridotites in the upper. Metamorphic mineral K-Ar ages from garnet amphibolite on the sole of the upper panel suggest that the upper panel was emplaced on the middle panel in the Middle to Late Jurassic. Subsequent accretion of all three panels to the continental rocks of the borderlands occurred in the latest Jurassic and Early Cretaceous, synchronous with arc volcanism within the basin. Arc volcanism waned and the accretionary phase ended in the middle of Early Cretaceous time. Uplift and erosion of the metamorphic borderlands and the obducted oceanic rocks began in late Early Cretaceous and was accompanied by the rapid filling of two flanking subbasins with turbiditic sediments. In the latest Early Cretaceous and early Late Cretaceous, shallow marine and nonmarine conglomerates were deposited around the margins of the basin, and a prograding delta was built out from the southeast margin of the basin across the turbiditic subbasins and the remnant volcanic arc. In the Late Cretaceous, western Alaska was subjected to strong east-west compression which severely deformed both the Yukon-Koyukuk basin and the borderlands. Several widespread magmatic episodes in the mid- and Late Cretaceous and in early Tertiary transgress the basin boundaries and stitch together the accreted arc and oceanic terranes and the continental borderlands.

Journal of Geophysical Research Solid Earth↗

USGS1974

Chemical variations across the Alaska-Aleutian Range batholith

A study of 79 chemical analyses of plutonic rocks in the northern part of the Alaska-Aleutian Range batholith shows that K 2 O and SiO 2 in Late Cretaceous and Tertiary rocks decrease toward the Pacific margin and that Al 2 O 3 and CaO increase. Plots for Fe 2 O 3 , FeO, MgO, and TiO 2 suggest a possible increase toward the Pacific margin; Na 2 O, H 2 O+, and MnO show no significant trends across the batholith. Oxide trends for groups of plutons in the western and eastern parts of the batholith in general are opposite that of the groups combined. For the Jurassic plutonic rocks, K 2 O may decrease toward the Pacific margin; other oxides show considerable scatter, and meaningful trends are not readily apparent. The oxide trends across the batholith are similar to trends across the central Sierra Nevada batholith of California, with the exception of SiO 2 and A1 2 O 3 , which show no significant changes. In the Coast Range batholith of British Columbia, potassium also increases away from the Pacific margin. The increase in K 2 O toward the continent in the Alaska-Aleutian Range batholith is similar to that found across Quaternary volcanic island arcs, where K 2 O content increases directly with increasing depth to inclined seismic zones. This increase suggests that generation of magma may have taken place along, or above, a paleoseismic zone. Geologic evidence supports such a model for the Jurassic plutonic rocks, which represent the roots of an early Mesozoic magmatic arc that probably formed above a descending oceanic plate. However, the hypothesis that magma for Late Cretaceous and Tertiary plutonic rocks was generated along seismic zones does not fit available geologic evidence, and an anatectic model cannot be ruled out.

Alaska↗

USGS1901

Twenty-First Annual report of the Director of the United States Geological Survey, 1899-1900: Part VII - Texas

Area treated. —The Black and Grand prairies of Texas and southern Indian Territory comprise about 50,000 square miles (see Pl. LXV, in pocket)—an area equal to that of fifty of the quadrangles mapped and described by the United States Geological Survey in its Geologic Atlas of the United States. The accompanying general geologic map (Pl. LXVI, in pocket) is a condensed presentation of the geology usually shown on that number of atlas sheets as published in folio form. Most of these quadrangles have been studied by the writer and his former assistants. Sources of data. —An entirely satisfactory presentation of these results is still impossible by reason of the lack of adequate maps. The topographic maps of the United States Geological Survey, which cover 24 of the 50 units of area, were made in the earlier years of the Survey and with a contour interval insufficient for the expression of the geology. For the remaining portion of the area it was necessary to use as a base the Land Office maps of the State of Texas. The conclusions herein presented, often condensed in a short paragraph, are founded upon a large amount of paleontologic, stratigraphic, and topographic data. The results, so far as they refer to the Black and Grand prairies, are the outcome of studies made by the writer since 1882, sometimes independently, sometimes with the assistance of the United States Geological Survey, and during two years in connection with the Texas Geological Survey. In times past he has been assisted in this work by his former students, C. C. McCulloch, now captain, U. S. A.; Messrs. Wilson T. Davidson and L. T. Dashiel; Mr. Joseph A. Taff, now of the United States Geological Survey; Dr. J. W. Stone, Mr. N. F. Drake, and Mr. G. H. Ragsdale. Inasmuch as the details which these gentlemem worked out were problems of the writer's suggestion, he has incorporated them into this paper, and here acknowledges indebtedness therefor. Upon the writer's retirement from the Texas Survey, Mr. Taff continued the work of mapping the region. He published two reports, which have been freely used and which have been of great assistance in the preparation of this paper. Importance of paleontology. —In addition to the collection of the data which appear in the text and illustrations, much paleontologic research has been necessary in order to classify the formations. Paleontology is the most reliable guide in determining the position of any bed in the geologic series with a view to ascertaining the depth, from any particular portion of the surface, of the underground waters in the Cretaceous regions of Texas. If a few species of fossils, such as can be found in any locality, be sent to one familiar with the sequence of the beds, he can predict within a few feet the depth below the surface of any particular water-bearing stratum in the series. It was a labor of years to disentangle the preexisting confusion concerning the occurrence and succession of these fossils and their bearings upon the determination and definition of the strata. Their further consideration has been left to Mr. T. W. Stanton, who, it is presumed, will make final publication of the descriptions and the scientific results. This is not a final and complete report. Detailed field work is desirable in many localities. Chemical analyses of water and illustrations of typical scenery should be more complete, but these were not obtainable with the means and time at the writer's disposal. When appreciation of geologic investigation shall have been awakened in Texas and the region under discussion shall have been studied more closely by resident students, in the manner now common in other parts of the United States, the data here presented will be largely increased and refined, and the conclusions will doubtless be correspondingly amended and rectified.

Texas↗

USGS2016

Geologic setting of the West Flank, a FORGE site adjacent to the Coso geothermal field

The West Flank FORGE (Frontier Observatory for Research in Geothermal Energy) site is located immediately west and outside of the Coso geothermal field, eastern California. Coso is a fluid-dominated, high temperature geothermal system that has been producing power continuously since 1987. The reservoir is composed of highly faulted, fractured and hydrothermally altered Cretaceous and Jurassic plutonic basement rocks. The heat source is a shallow, silicic magma chamber associated with overlying, Quaternary rhyolites and basalts of the Coso volcanic field. Over 30 years of development drilling and associated investigations demonstrates that several well-defined boundaries exist at Coso beyond which there is no commercial, hydrothermal geothermal potential. The West Flank is just west of one of these boundaries and it meets all required FORGE temperature (175-225˚C), host rock (crystalline rock), and depth (1.5-4.0 km) criteria. It has been hypothesized that the Coso volcanic field exists within a right-releasing step-over between two NW-striking, dextral fault systems. Two distinct fault populations yield high permeability drilling targets in the geothermal field. The first population contains WNW-trending with antithetical, NE-trending strike-slip faults and the second includes N- to NNE-trending normal faults. The West Flank appears to be separated from the geothermal field by one such northerly trending fault bounded by a felsic dike swarm. The West Flank’s 83-11 well suggests that the West Flank is comprised of weakly altered, leucogranite and diorites typical of the Jurassic to Cretaceous basement. The stress field in the West Flank has been rotated to 81˚ in contrast to the minimum principal stress orientations within the geothermal field which range from 103˚ to 108˚. Limited drilling, geophysics and other data sets are being assessed and synthesized to develop a working, 3d conceptual geologic model of the West Flank for FORGE.

California↗

USGS2001

The Cretaceous-Tertiary boundary interval in Badlands National Park, South Dakota

A marine K-T boundary interval has been identified throughout the Badlands National Park region of South Dakota. Data from marine sediments suggest that deposits from two asteroid impacts (one close, one far away) may be preserved in the Badlands. These impact-generated deposits may represent late Maestrichtian events or possibly the terminal K-T event. Interpretation is supported by paleontological correlation, sequence stratigraphy, magnetostratigraphy, and strontium isotope geochronology. This research is founded on nearly a decade of NPS approved field work in Badlands National Park and a foundation of previously published data and interpretations. The K-T boundary occurs within or near the base of a stratigraphic interval referred to as the "Interior Zone." We interpret the stratigraphy of the Interior Zone as a series of distinct, recognizable lithologic members and units from oldest to youngest, an upper weathered interval of the Elk Butte Member of the Pierre Shale (early late Maestrichtian), a complete (albeit condensed) interval of Fox Hill Formation, a pedogenically altered K-T Boundary "Disturbed Zone," and a generally unresolved sequence of marine to marginal marine units ranging in age from possibly latest Maestrichtian to late Paleocene (the "Yellow Mounds"), that underlie a basal red clay unit (the late Eocene overbank channel facies of the Chamberlain Pass Formation at the base of the White River Group). Within this sequence is a series of unconformities that all display some degree of subaerial weathering and erosion. The dating of marine fossils above and below these unconformities are in line with generally accepted global sea-level changes recognized for the late Campanian through early Eocene. Within the greater framework of regional geology, these findings support that the Western Interior Seaway and subsequent Cannonball Seaway were dependently linked to the changing base-level controlled by sea-level of the global ocean through the Gulf of Mexico and possibly the Arctic Ocean. The variation of facies preserved in Late Cretaceous strata in the Badlands National Park area were in part controlled by local or regional tectonic blocks that were either rising or sinking contemporaneous with deposition.

South Dakota↗

USGS2014

40 Ar/ 39 Ar geochronological constraints on the formation of the Dayingezhuang gold deposit: New implications for timing and duration of hydrothermal activity in the Jiaodong gold province, China

China's largest gold resource is located in the highly endowed northwestern part of the Jiaodong gold province. Most gold deposits in this area are associated with the NE- to NNE-trending shear zones on the margins of the 130–126 Ma Guojialing granite. These deposits collectively formed at ca. 120 ± 5 Ma during rapid uplift of the granite. The Dayingezhuang deposit is a large (> 120 t Au) orogenic gold deposit in the same area, but located along the eastern margin of the Late Jurassic Linglong Metamorphic Core Complex. New 40 Ar/ 39 Ar geochronology on hydrothermal sericite and muscovite from the Dayingezhuang deposit indicate the gold event is related to evolution of the core complex at 130 ± 4 Ma and is the earliest important gold event that is well-documented in the province. The Dayingezhuang deposit occurs along the Linglong detachment fault, which defines the eastern edge of the ca. 160–150 Ma Linglong granite–granodiorite massif. The anatectic rocks of the massif were rapidly uplifted, at rates of at least 1 km/m.y. from depths of 25–30 km, to form the metamorphic core complex. The detachment fault, with Precambrian metamorphic basement rocks in the hangingwall and the Linglong granitoids and migmatites in the footwall, is characterized by early mylonitization and a local brittle overprinting in the footwall. Gold is associated with quartz–sericite–pyrite–K-feldspar altered footwall cataclasites at the southernmost area of the brittle deformation along the detachment fault. Our results indicate that there were two successive, yet distinct gold-forming tectonic episodes in northwestern Jiaodong. One event first reactivated the detachment fault along the edge of the Linglong massif between 134 and 126 Ma, and then a second reactivated the shears along the margins of the Guojialing granite. Both events may relate to a component of northwest compression after a middle Early Cretaceous shift from regional NW–SE extension to a NE–SW extensional regime.

Gondwana Research↗

USGS1978

Significance of age relations above and below upper jurassic ophiolite in the Geysers-Clear Lake region, California

In The Geysers-Clear Lake area of northern California, a fragmented Upper Jurassic ophiolite overlain depositionally by the Great Valley sequence is juxtaposed over deformed and metomorphosed rocks of the Franciscan assemblage along the Coast Range thrust. The basal strata of the Great Valley sequence consist of thick breccias of mafic clasts, identical in composition to the upper part of the ophiolite. These breccias and their contact relations suggest that more than 1 km of the upper part of the ophiolite was locally eroded in early Tithonian time. On the basis of their radiolarian faunas, cherts in the Franciscan assemblage below the ophiolite range in age from Late Jurassic (early Tithonian) to Late Cretaceous (early Cenomanian). Of particular significance is an individual chert body (= The Geysers chert) of this age range. The early Cenomanian radiolarians, except for two occurrences associated with pelagic limestone, are significantly younger than those previously reported from the Franciscan assemblage. The existence of a sequence of Late Jurassic to Late Cretaceous radiolarian chert places critical constraints on subduction models for emplacement of the Franciscan assemblage beneath the Coast Range ophiolite and Great Valley sequence in The Geysers-Clear Lake area. From early Tithonian to post-early Cenomanian time, the Franciscan assemblage received pelagic sedimentation far from any site of subduction. By other data, blueschist metamorphism of subducted Franciscan strata also occurred during this time. The radiolarian data from The Geysers area permit a correlation with Upper Cretaceous pelagic limestones in the Laytonville area northwest of The Geysers and also imply that the Great Valley sequence was never depositionally in contact with the Franciscan assemblage.

California↗

USGS2010

Ground-water flow related to streamflow and water quality

A ground-water flow system in southwestern Minnesota illustrates water movement between geologic units and between the land surface and the subsurface. The flow patterns indicate numerous zones of ground-water recharge and discharge controlled by topography, varying thicknesses of geologic units, variation in permeabilities, and the configuration of the basement rock surface. Variations in streamflow along a reach of the Yellow Medicine River agree with the subsurface flow system. Increases and decreases in runoff per square mile correspond, apparently, to ground-water discharge and recharge zones. Ground-water quality variations between calcium sulfate waters typical of the Quaternary drift and sodium chloride waters typical of the Cretaceous rocks are caused by mixing of the two water types. The zones of mixing are in agreement with ground-water flow patterns along the hydrologic section.

Water Resources Research↗

USGS1976

A geochemical study of oil in metalliferous veins, Idarado Mine, San Juan Mountains, Colorado

A tarry, benzene-soluble material is present in metal-rich veins in the Idarado mine, Ouray County, Colo., in an area not known to have petroleum resources. The material was compared chemically, spectometrically, and chromatographically with oils from four fields in the nearby Paradox basin. Each of these oil fields contains reservoir rocks equivalent to rock units known to extend beneath volcanic rocks near the mine. Carbon and sulfur isotope data and gas chromatographic data indicate a similarity between the oil from the nearby Sierra field and the oil from the mine. Thus, it seems both geologically and chemically possible that oil in the mine originated in Cretaceous sediments. Variations in the composition of oil from the mine and differences between the mine oil and Sierra oil, notably in the distributions of hydrocarbons, are attributed to bacterial degradation.

Colorado↗

USGS2008

Aeromagnetic evidence for a buried Early Cretaceous magmatic arc, northeast Japan

Positive aeromagnetic anomalies, recent drilling, and models constructed from these data delineate the plutonic roots of the Early Cretaceous Kitakami magmatic arc in northeast Japan. Buried plutons, mostly offshore, produce belts of positive magnetic anomalies. These anomalies and magnetotelluric data suggest that the plutons form a batholith 70–120 km wide, nearly 800 km long, and 10–15 km thick. The batholith may mark the location of the main Kitakami arc. Most of the exposed Kitakami plutons are 2–20 km in diameter; some are 3 km thick. The small plutons line up along NW trending faults; some may have been satellite vents that tapped into the magma supply of the main arc. The batholithic roots of the main arc now compose almost half of the modern Japan forearc basement. Steep magnetic gradients, offset anomalies, and basin stratigraphy portray extensive faulting of the Kitakami batholith during oblique subduction in the Late Cretaceous and rifting in the Miocene. The eastern boundary of the Kitakami batholith lies between 90 and 140 km west of the modern trench, much closer than the 300-km distance between the active arc and trench. The Early Cretaceous forearc basin and accretionary prism may underlie the modern forearc basin east of the batholith, but clear evidence is lacking. Much of the Early Cretaceous margin, including most of its forearc therefore is missing. How the material was removed is unknown: it could have been strike-slip faulted, eroded by subduction-related processes, or both.

Journal of Geophysical Research B: Solid Earth↗

USGS2016

Assessment of canyon wall failure process from multibeam bathymetry and Remotely Operated Vehicle (ROV) observations, U.S. Atlantic continental margin

Over the last few years, canyons along the northern U.S. Atlantic continental margin have been the focus of intensive research examining canyon evolution, submarine geohazards, benthic ecology and deep-sea coral habitat. New high-resolution multibeam bathymetry and Remotely Operated Vehicle (ROV) dives in the major shelf-breaching and minor slope canyons, provided the opportunity to investigate the size of, and processes responsible for, canyon wall failures. The canyons cut through thick Late Cretaceous to Recent mixed siliciclastic and carbonate-rich lithologies which impart a primary control on the style of failures observed. Broad-scale canyon morphology across much of the margin can be correlated to the exposed lithology. Near vertical walls, sedimented benches, talus slopes, and canyon floor debris aprons were present in most canyons. The extent of these features depends on canyon wall cohesion and level of internal fracturing, and resistance to biological and chemical erosion. Evidence of brittle failure over different spatial and temporal scales, physical abrasion by downslope moving flows, and bioerosion, in the form of burrows and surficial scrape marks provide insight into the modification processes active in these canyons. The presence of sessile fauna, including long-lived, slow growing corals and sponges, on canyon walls, especially those affected by failure provide a critical, but as yet, poorly understood chronological record of geologic processes within these systems.

Book chapter↗