Search USGS⌕ Search

SEARCH · Search USGS

Results for “Conference Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
USGS1983

Euler-Lagrangian computation for estuarine hydrodynamics

The transport of conservative and suspended matter in fluid flows is a phenomenon of Lagrangian nature because the process is usually convection dominant. Nearly all numerical investigations of such problems use an Eulerian formulation for the convenience that the computational grids are fixed in space and because the vast majority of field data are collected in an Eulerian reference frame. Several examples are given in this paper to illustrate a modeling approach which combines the advantages of both the Eulerian and Lagrangian computational techniques.

Conference Paper↗
USGS2008

A generic analysis of energy use and solvent selection for CO2 separation from post-combustion flue gases

A thermodynamic calculation was performed to determine the theoretical minimum energy used to separate CO2 from a coal combustion flue gas in a typical adsorption-desorption system. Under ideal conditions, the minimum energy required to separate CO2 from post-combustion flue gas and produce pure CO2 at 1 atmospheric pressure was only about 1183 kJ/kg CO2. This amount could double with the addition of the driving forces of mass and heat transfer and the adverse impacts of absorption heat release on adsorption capacity. Thermodynamic analyses were also performed for the aqueous amine-based absorption process. Two CO2 reaction mechanisms, the carbamate formation reaction with primary/secondary amines and the CO2 hydration reaction with tertiary amines, were included in the absorption reaction. The reaction heat, sensible heat, and stripping heat were all important to the total heat requirement. The heat use of an ideal tertiary amine amounted to 2786 kJ/kg, compared to 3211 kJ/kg for an ideal primary amine. The heat usage of an ideal amine was about 20% lower than that of commercially available amines. Optimizing the absorption process configuration could further reduce energy use. This is an abstract of a paper presented at the 2008 AIChE Spring National Meeting (New Orleans, LA 4/6-10/2008).

Conference Paper↗
USGS2007

Multi-scale reservoir modeling as an integrated assessment tool for geo-sequestration in the San Juan Basin

The Southwestern Regional Partnership on CO2 Sequestration conducted an Enhanced Coalbed Methane (ECBM)/Carbon Storage Pilot in the San Juan Basin as part of the ongoing DOE/NETL Carbon Capture and Storage Program. The primary goal of this pilot is to demonstrate the efficacy of using CO2 to enhance coalbed methane recovery particularly near reservoir abandonment pressure while also evaluating the suitability of coal seams for longer-term carbon storage. Basic geologic models of the coal seams were developed from well logs in the area. Production histories from several surrounding CBM wells were shown. To monitor the injection of up to 75,000 ton of CO2 beginning September 2007, seismic surveys and tiltmeter arrays were utilized. Larger-scale geo-hydrodynamic simulations were used to develop a regional model for the fluid dynamics of the northern San Juan Basin. Smaller-scale reservoir simulations, incorporating available laboratory and field data, were used to develop an improved understanding of reservoir dynamics within the specific 640-acre pilot area. Both modeling scales were critical to assessing the suitability of deploying commercial carbon storage programs throughout the basin. Reservoir characterization results on the optimization of total CO2 injection volume, injection rate over time, and how CO2 is expected to disperse after injection are presented. This is an abstract of a paper presented at the 2007 AIChE Annual Meeting (Salt Lake City, UT 11/4-9/2007).

Conference Paper↗
USGS2017

Statistical relative gain calculation for Landsat 8

The Landsat 8 Operational Land Imager (OLI) is an optical multispectral push-broom sensor with a focal plane consisting of over 7000 detectors per spectral band. Each of the individual imaging detectors contributes one column of pixels to an image. Any difference in the response between neighboring detectors may result in a visible stripe or band in the imagery. An accurate estimate of each detector’s relative gain is needed to account for any differences between detector responses. This paper describes a procedure for estimating relative gains which uses normally acquired Earth viewing statistics.

Conference Paper↗
USGS2011

Review of concepts useful for maintaining quality of male reproductive field samples for laboratory study

Investigations into cellular and molecular characteristics of male gametes obtained from fish in natural ecosystems require careful sample handling and shipping in order to minimize artifacts. Maintaining sample integrity engenders confident assessments of ecosystem health, whereby animal condition is often reflected by gamete biomarkers - indicators that respond in measurable ways to changes. A number of our investigations have addressed the hypothesis that biomarkers from fish along a pollution gradient are reflective of site location. Species biology and the selected biological endpoints direct choice of parameters such as: temperature, buffer osmolality, time in transit, fixation, cryoprotectants, protease inhibition, and antibiotic inclusion in extender. This paper will highlight case studies, and outline parameters and thoughts on approaches for use by field and laboratory researchers.

Conference Paper↗
USGS1984

QUANTIFICATION OF IN-SITU GAS HYDRATES WITH WELL LOGS.

This study evaluates in detail the expected theoretical log responses and the actual log responses within one stratigraphically controlled hydrate horizon in six wells spaced throughout the Kuparuk Oil Field. Detailed examination of the neutron porosity and sonic velocity responses within the horizon is included. In addition, the theoretical effect of the presence of hydrates on the neutron porosity and sonic velocity devices has been examined in order to correct for such an effect on the calculation of formation properties such as porosity and hydrate saturation. Also presented in the paper is a technique which allows the conclusive identification of a potential hydrate occurrence.

Conference Paper↗
USGS1990

Urban hydrology in the desert, Antelope Valley, California

A study of urban hydrology in Antelope Valley includes data collection, analysis of rainfall and runoff frequencies, and comparison of results from various rainfall-runoff models. This paper discusses only parts of the project that include data collection and frequency analyses.

Conference Paper↗
USGS1993

Assessment and prediction of debris-flow hazards

Study of debris-flow geomorphology and initiation mechanism has led to better understanding of debris-flow processes. This paper reviews how this understanding is used in current techniques for assessment and prediction of debris-flow hazards.

Conference Paper↗
USGS2010

Archiving strategy for USGS EROS center and our future direction

The U. S. Geological Survey's Earth Resources Observation and Science Center has the responsibility to acquire, manage, and preserve our Nation's land observations. These records are obtained primarily from airplanes and satellites dating back to the 1930s. The ability to compare landscapes from the past with current information enables change analysis at local and global scales. With new observations added daily, the records management challenges are daunting, involving petabytes of electronic data and tens of thousands of rolls of analog film. This paper focuses upon the appraisal and preservation functions employed to ensure that these records are available for current and future generations.

Conference Paper↗
USGS1988

Calibration of water-velocity meters

The U.S. Geological Survey, Department of the Interior, as part of its responsibility to appraise the quantity of water resources in the United States, maintains facilities for the calibration of water-velocity meters at the Gulf Coast Hydroscience Center's Hydraulic Laboratory Facility, NSTL, Mississippi. These meters are used in hydrologic studies by the Geological Survey, U.S. Army Corps of Engineers, U.S. Department of Energy, state agencies, universities, and others in the public and private sector. This paper describes calibration facilities, types of water-velocity meters calibrated, and calibration standards, methods and results.

Conference Paper↗
USGS1993

Reference surfaces for bridge scour depths

Depth of scour is measured as the vertical distance between scoured channel geometry and a measurement reference surface. A scour depth measurement can have a wide range depending on the method used to establish the reference surface. A consistent method to establish reference surfaces for bridge scour measurements is needed to facilitate transferability of scour data an scour analyses. This paper describes and evaluates techniques for establishing reference surfaces from which local and contraction scour are measured.

Conference Paper↗
USGS2004

Development of a consortium for water security and safety: Planning for an early warning system

The events of September 11, 2001 have raised concerns over the safety and security of the Nation's critical infrastructure including water and waste water systems. In June 2002, the U.S. EPA's Region II Office (New York City), in response to concerns over water security, in collaboration with Rutgers University agreed to establish a Regional Drinking Water Security and Safety Consortium (RDWSSC). Members of the consortium include: Rutgers University's Center for Information Management, Integration and Connectivity (CIMIC), American Water (AW), the Passaic Valley Water Commission (PVWC), the North Jersey District Water Supply Commission (NJDWSC), the N.J. Department of Environmental Protection, the U.S. Geological Survey (USGS), and the U.S. Environmental Protection Agencies, Region II Office. In December of 2002 the consortium members signed a memorandum of understanding (MOU) to pursue activities to enhance regional water security. Development of an early warning system for source and distributed water was identified as being of primary importance by the consortium. In this context, an early warning system (EWS) is an integrated system of monitoring stations located at strategic points in a water utilities source waters or in its distribution system, designed to warn against contaminants that might threaten the health and welfare of drinking water consumers. This paper will discuss the consortium's progress in achieving these important objectives.

Conference Paper↗
USGS2005

Adsorption in single-walled carbon nanotubes by experiments and molecular simulation II: Effect of morphology and temperature on organic adsorption

Hexane adsorption on single-walled carbon nanotube (SWNT) bundles was studied. Hexane adsorption capacities of two purified SWNT samples was gravimetrically determined at isothermal conditions of 25??, 37??, and 50??C for 10-4 < p/po < 0.9, where p/po is hexane vapor pressure relative to its saturation pressure. Simulation of hexane adsorption under similar temperature and pressure conditions were performed on the external and internal sites of nanotube bundles of diameters same as those in experimental samples. The simulations could predict isotherms for a hypothetical scenario where all nanotubes in a sample would be open. This is an abstract of a paper presented at the AIChE Annual Meeting and Fall Showcase (Cincinnati, OH 10/30/2005-11/4/2005).

Conference Paper↗
USGS2003

The Sohagpur Coalfield Project - A collaborative study of potential coking coal resources by the Geological Survey of India and the U.S. Geological Survey

The Geological Survey of India (GSI), Coal Wing, and the U.S. Geological Survey (USGS), Energy Resources Team, conducted a collaborative study of the potential for coking coal resources within the Sohagpur coalfield, Madhya Pradesh, India from 1995 to 2001. The coalfield is located within an extensional basin that contains Permian- and Triassic-age strata of the Gondwana Supergroup (Figs. 1 and 2). The purposes of the study were to perform a synthesis of previous work and. an integrated analysis of the basin of deposition with particular emphasis on the regional stratigraphy and depositional environments of the coal-bearing strata, the geologic structure of the basin, and the geochemistry of the coal in order to understand the geologic controls on the distribution of coking coals within the basin. The results of this study have been published previously (Mukhopadhyay and others, 2001a, b), and this paper provides a general overview of our findings.

Conference Paper↗
USGS2013

Oak woodlands and forests fire consortium: A regional view of fire science sharing

The Joint Fire Science Program established 14 regional fire science knowledge exchange consortia to improve the delivery of fire science information and communication among fire managers and researchers. Consortia were developed regionally to ensure that fire science information is tailored to meet regional needs. In this paper, emphasis was placed on the Oak Woodlands and Forests Fire Consortium to provide an inside view of how one regional consortium is organized and its experiences in sharing fire science through various social media, conference, and workshop-based fire science events.

Conference Paper↗
USGS2012

Digital floodplain mapping and an analysis of errors involved

Mapping floodplain boundaries using geographical information system (GIS) and digital elevation models (DEMs) was completed in a recent study. However convenient this method may appear at first, the resulting maps potentially can have unaccounted errors. Mapping the floodplain using GIS is faster than mapping manually, and digital mapping is expected to be more common in the future. When mapping is done manually, the experience and judgment of the engineer or geographer completing the mapping and the contour resolution of the surface topography are critical in determining the flood-plain and floodway boundaries between cross sections. When mapping is done digitally, discrepancies can result from the use of the computing algorithm and digital topographic datasets. Understanding the possible sources of error and how the error accumulates through these processes is necessary for the validation of automated digital mapping. This study will evaluate the procedure of floodplain mapping using GIS and a 3 m by 3 m resolution DEM with a focus on the accumulated errors involved in the process. Within the GIS environment of this mapping method, the procedural steps of most interest, initially, include: (1) the accurate spatial representation of the stream centerline and cross sections, (2) properly using a triangulated irregular network (TIN) model for the flood elevations of the studied cross sections, the interpolated elevations between them and the extrapolated flood elevations beyond the cross sections, and (3) the comparison of the flood elevation TIN with the ground elevation DEM, from which the appropriate inundation boundaries are delineated. The study area involved is of relatively low topographic relief; thereby, making it representative of common suburban development and a prime setting for the need of accurately mapped floodplains. This paper emphasizes the impacts of integrating supplemental digital terrain data between cross sections on floodplain delineation. ?? 2007 ASCE.

Conference Paper↗
USGS2012

Trends in live-bed pier scour at selected bridges in South Carolina

The U.S. Geological Survey, in cooperation with the South Carolina Department of Transportation, used ground-penetrating radar to collect measurements of live-bed pier scour at 78 bridges in the Piedmont and Coastal Plain physiographic provinces of South Carolina. The 141 measurements of live-bed pier-scour depth ranged from 0.5 to 5.1 meters. Using hydraulic data estimated with a one-dimensional flow model, predicted live-bed scour depths were computed with scour equations from the Hydraulic Engineering Circular 18 and compared with measured scour. This comparison indicated that predicted pier-scour depths generally exceeded the measured pier-scour depths. At times, predicted pier-scour depths were excessive with overpredictions as large as 7.0 meters. Relations in the live-bed pier-scour data also were investigated, leading to the development of an envelope curve for assessing the upper-bound of live-bed pier scour using pier width as the primary explanatory variable. The envelope curve developed with the field data has limitations, but it can be used as a supplementary tool for assessing the potential for live-bed pier scour in South Carolina. This paper will present findings related to the field investigation of live-bed pier scour. A companion paper presents findings related to live-bed contraction scour that was studied during the same field investigation.

South Carolina↗
USGS2016

Radiometric calibration updates to the Landsat collection

The Landsat Project is planning to implement a new collection management strategy for Landsat products generated at the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center. The goal of the initiative is to identify a collection of consistently geolocated and radiometrically calibrated images across the entire Landsat archive that is readily suitable for time-series analyses. In order to perform an accurate land change analysis, the data from all Landsat sensors must be on the same radiometric scale. Landsat 7 Enhanced Thematic Mapper Plus (ETM+) is calibrated to a radiance standard and all previous sensors are cross-calibrated to its radiometric scale. Landsat 8 Operational Land Imager (OLI) is calibrated to both radiance and reflectance standards independently. The Landsat 8 OLI reflectance calibration is considered to be most accurate. To improve radiometric calibration accuracy of historical data, Landsat 1-7 sensors also need to be cross-calibrated to the OLI reflectance scale. Results of that effort, as well as other calibration updates including the absolute and relative radiometric calibration and saturated pixel replacement for Landsat 8 OLI and absolute calibration for Landsat 4 and 5 Thematic Mappers (TM), will be implemented into Landsat products during the archive reprocessing campaign planned within the new collection management strategy. This paper reports on the planned radiometric calibration updates to the solar reflective bands of the new Landsat collection.

Conference Paper↗