Search USGSSearch

SEARCH · Search USGS

Results for “Clay Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

The geochemistry of loess: Asian and North American deposits compared

Loess is widely distributed over Asia and North America and constitutes one of the most important surficial deposits that serve as terrestrial records of the Quaternary. The oldest Pleistocene loess in China is likely ∼2.6 Ma, thus spanning much or all of the Pleistocene. In North America, most loess is no older than the penultimate glacial period, with the exception of Alaska, where the record may go back to ∼3.0 Ma. On both continents, loess deposits date primarily to glacial periods, and interglacial or interstadial periods are represented by paleosols. Both glacial and non-glacial sources of silts that comprise the bulk of loess deposits are found on both continents. Although loess has been considered to be representative of the average upper continental crust, there are regionally distinctive compositions of loess in both Asia and North America. Loess deposits in Asia from Yakutia, Tajikistan, and China have compositionally distinct major element compositions, due to varying abundances of silicate minerals, carbonate minerals, and clay minerals. In North America, loess in the Mississippi River valley, the Great Plains, and Alaska are also distinguishable with regard to major element composition that reflects highly diverse source sediments. Trace element geochemistry (Sc-Th-Zr and the rare earth elements) also shows regional diversity of loess bodies, in both Asia and North America. On both continents, most loess bodies show significant contributions from later-cycle, altered sedimentary rocks, as opposed to direct derivation from igneous rocks. Further, some loess bodies have detectable contributions from mafic igneous rocks as well as major contributions from average, upper-crustal, felsic rocks. Intercalated paleosols in loess sections show geochemical compositions that differ significantly from the underlying loess parent materials. Ratios of soluble-to-insoluble elements show depletions in paleosols due to chemical weathering losses of calcite, dolomite, plagioclase, mica, apatite, and smectite. In Asia and North America, the last interglacial paleosol is more weathered than equivalent modern soils, which could be due either to a climate that was warmer and more humid, a longer period of pedogenesis, or both. In Asia, early Pleistocene loess and paleosols are both more weathered than those from the middle and late Pleistocene, forming prior to a mid-Pleistocene aridification of Asia from uplift of the Tibetan Plateau. Understanding the geochemistry of loess and paleosols can tell us much about past atmospheric circulation, past temperature and moisture regimes, and even tectonic processes.

Journal of Asian Earth Sciences

Sedimentology, sequence-stratigraphy, and geochemical variations in the Mesoproterozoic Nonesuch Formation, northern Wisconsin, USA

We use core descriptions and portable X-ray fluorescence analyses to identify lithofacies and stratigraphic surfaces for the Mesoproterozoic Nonesuch Formation within the Ashland syncline, Wisconsin. We group lithofacies into facies associations and construct a sequence stratigraphic framework based on lithofacies stacking and stratigraphic surfaces. The fluvial-alluvial facies association (upper Copper Harbor Conglomerate) is overlain across a transgressive surface by the fluctuating-profundal facies association (lower Nonesuch Formation). The fluctuating-profundal facies association comprises a retrogradational sequence set overlain across a maximum flooding surface by an aggradational-progradational sequence set comprising fluctuating-profundal, fluvial-lacustrine, and fluvial-alluvial facies associations (middle Nonesuch through lower Freda Formations). Lithogeochemistry supports sedimentologic and stratigraphic interpretations. Fe/S molar ratios reflect the oxidation state of the lithofacies; values are most depleted above the maximum flooding surface where lithofacies are chemically reduced and are greatest in the chemically oxidized lithofacies. Si/Al and Zr/Al molar ratios reflect the relative abundance of detrital heavy minerals vs. clay minerals; greater values correlate with larger grain size. Vertical facies association stacking records depositional environments that evolved from fluvial and alluvial, to balanced-fill lake, to overfilled lake, and returning to fluvial and alluvial. Elsewhere in the basin, where accommodation was greatest, some volume of fluvial-lacustrine facies is likely present below the transgressive stratigraphic surface. This succession of continental and lake-basin types indicates a predominant tectonic driver of basin evolution. Lithofacies distribution and geochemistry indicate deposition within an asymmetric half-graben bounded on the east by a west-dipping growth fault. While facies assemblages are lacustrine and continental, periodic marine incursions are probable, especially across maximum transgressive surfaces. We demonstrate a sequence-stratigraphic approach may be applied to fine-grained Precambrian sediments using traditional rock description and supporting lithogeochemistry. Identification of a characteristic lithofacies succession in Mesoproterozoic sediments demonstrates fundamental controls commonly interpreted for Phanerozoic lake systems may be extended into the Precambrian. These controls result in a predictable association of lithofacies, with distinct physical, biological, and geochemical properties. This has regional significance for carbon sequestration and the distribution of mineral and hydrocarbon resources and broader significance for addressing Mesoproterozoic paleogeographic reconstructions and questions related to the evolution of terrestrial life.

Wisconsin

Diagenesis and interstitial-water chemistry at the Peruvian continental margin; major constituents and strontium isotopes

Two distinct hydrogeochemical regimes currently dominate the Peruvian continental margin. One, in shallower water (150-450 m) shelf to upper-slope regions, is characterized by interstitial waters with strong positive chloride gradients with depth. The maximum measured value of 1043 mM chloride at Site 680 at ITS corresponds to a degree of seawater evaporation of ~2 times. Major ion chemistry and strontioum isotopic composition of the interstitial waters suggest that a subsurface brine that has a marine origin and is of pre-early Miocene "age," profoundly influences the chemistry and diagenesis of this shelf environment. Site 684 at ~9°S must be closest to the source of this brine, which becomes diluted with seawater and/or interstitial water as it flows southward toward Site 686 at ~13°S (and probably beyond) at a rate of approximately 3 to 4 cm/yr, since early Miocene time. The other regime, in deep water (3000-5000 m) middle to lower-slope regions, is characterized by interstitial waters with steep negative and nonsteady-state chloride gradients with depth. The minimum measured value of 454 mM chloride, at Site 683 at ITS, corresponds to —20% dilution of seawater chloride The most probably sources of these low-chloride fluids are gas hydrate dissociation and mineral (particularly clay) dehydration reactions. Fluid advection is consistent with (1) the extent of dilution shown in the chloride profiles, (2) the striking nonsteady-state depth profiles of chlorides at Sites 683 and 688 and of 87Sr/86Sr ratios at Site 685, and (3) the temperatures resulting from an average geothermal gradient of 50°C/km and required for clay mineral dehydration reactions. Strontium isotope data reveal two separate fluid regimes in this slope region: a more northerly one at Sites 683 and 685 that is influenced by fluids with a radiogenic continental strontium signature, and a southerly one at Sites 682 and 688 that is influenced by fluids with a nonradiogenic oceanic signatures. Stratigraphically controlled fluid migration seems to prevail in this margin. Because of its special tectonic setting, Site 679 at ITS is geochemically distinct. The interstitial waters are characterized by seawater chloride concentrations to —200 mbsf and deeper by a significantly lower chloride concentration of about two-thirds of the value in seawater, suggesting mixing with a meteoric water source. Regardless of the hydrogeochemical regime, the chemistry and isotopic compositions of the interstitial waters at all sites are markedly modified by diagenesis, particularly by calcite and dolomite crystallization.

Peruvian Continental Margin

Borehole petrophysical chemostratigraphy of Pennsylvanian black shales in the Kansas subsurface

Pennsylvanian black shales in Kansas have been studied on outcrop for decades as the core unit of the classic Midcontinent cyclothem. These shales appear to be highstand condensed sections in the sequence stratigraphic paradigm. Nuclear log suites provide several petrophysical measurements of rock chemistry that are a useful data source for chemostratigraphic studies of Pennsylvanian black shales in the subsurface. Spectral gamma-ray logs partition natural radioactivity between contributions by U, Th, and K sources. Elevated U contents in black shales can be related to reducing depositional environments, whereas the K and Th contents are indicators of clay-mineral abundance and composition. The photoelectric factor log measurement is a direct function of aggregate atomic number and so is affected by clay-mineral volume, clay-mineral iron content, and other black shale compositional elements. Neutron porosity curves are primarily a response to hydrogen content. Although good quality logs are available for many black shales, borehole washout features invalidate readings from the nuclear contact devices, whereas black shales thinner than tool resolution will be averaged with adjacent beds. Statistical analysis of nuclear log data between black shales in successive cyclothems allows systematic patterns of their chemical and petrophysical properties to be discriminated in both space and time. ?? 2004 Elsevier B.V. All rights reserved.

Chemical Geology

Surface (sea floor) and near-surface (box cores) sediment mineralogy in Baffin Bay as a key to sediment provenance and ice sheet variations

To better understand the glacial history of the ice sheets surrounding Baffin Bay and to provide information on sediment pathways, samples from 82 seafloor grabs and core tops, and from seven box cores were subjected to quantitative X-ray diffraction weight percent (wt.%) analysis of the <2 mm sediment fraction. The samples were collected between 67°N and 78°N, in water depths of 155 to 2375 m and were retrieved on cruises between A.D. 1964 and 2009. Grain size, magnetic characteristics, and colour reflectance data were also obtained on many of the samples. Twenty-one non-clay and 10 clay mineral species were identified; the average wt.% of the non-clay minerals was 70% and was dominated by quartz, various feldspars, and dolomite, whereas the dominant clay minerals were 1 M illite, biotite, and chlorite. Cluster analysis on principal component scores identified three main mineral groups, which also had strong associations with grain size and sediment magnetic properties. Box cores from the deep central basin (>2000 m) all show an abrupt drop in calcite wt.% (post-5 cal ka BP?) following a major peak in detrital carbonate (mainly dolomite). This dolomite-rich detrital carbonate (DC) event in JR175BC06 is possibly coeval with the Younger Dryas cold event. Four possible glacial-sourced end members were employed in a compositional unmixing algorithm to gain insight into down core changes in sediment provenance at the deep central basin. Estimates of the rates of sediment accumulation in the central basin are only in the range of 2 to 4 cm/cal ka, surprisingly low given the glaciated nature of the surrounding land.

Canadian Journal of Earth Sciences

Mars Science Laboratory CheMin data from the Glen Torridon region and the significance of lake-groundwater interactions in interpreting mineralogy and sedimentary history

The Glen Torridon (GT) region is positioned in terrains with strong clay mineral signatures, as inferred from orbital spectroscopy. The GT campaign confirmed orbital distinctions with in situ measurements by the Mars Science Laboratory rover, Curiosity , and the CheMin X-ray diffraction instrument with of some of the highest clay mineral abundances to date. Additionally, GT is unique because of distinct phase identifications for the first time by CheMin, including: (i) Fe-carbonates, and (ii) a novel peak in the XRD patterns of some GT samples, with an interplanar spacing of at 9.2 Å. Fe-carbonates have been previously suggested from other instruments onboard, but this is the first definitive reporting by CheMin of multiple samples with Fe-carbonate. This new phase has never been observed in Gale crater with the CheMin instrument and may be a new mineral for Mars, but discrete identification still remains enigmatic because no single phase on Earth is able to account the mineralogical, geochemical, and sedimentological constraints in the GT region. Here, we modeled XRD profiles and propose an interstratified clay mineral, specifically greenalite-minnesotaite (G-M), as a reasonable candidate. The coexistence of Fe-carbonate and Fe-rich clay minerals in the GT samples, supports a conceptual model of a lacustrine groundwater mixing environment in the ancient Gale crater lake. Groundwater interaction with percolating lake waters in the sediments is common in terrestrial lacustrine settings, and the diffusion of two distinct water bodies within the subsurface can create a geochemical gradient and unique mineral front in the sediments. Ultimately, the proximity to this mixing zone controlled the secondary minerals preserved in the Jura, Knockfarril Hill, and Glasgow members of the Mt. Sharp group exposed in GT.

Journal of Geophysical Research E: Planets

Experimental alteration of artificial and natural impact melt rock from the Chesapeake Bay impact structure

The alteration or transformation of impact melt rock to clay minerals, particularly smectite, has been recognized in several impact structures (e.g., Ries, Chicxulub, Mj??lnir). We studied the experimental alteration of two natural impact melt rocks from suevite clasts that were recovered from drill cores into the Chesapeake Bay impact structure and two synthetic glasses. These experiments were conducted at hydrothermal temperature (265 ??C) in order to reproduce conditions found in meltbearing deposits in the first thousand years after deposition. The experimental results were compared to geochemical modeling (PHREEQC) of the same alteration and to original mineral assemblages in the natural melt rock samples. In the alteration experiments, clay minerals formed on the surfaces of the melt particles and as fine-grained suspended material. Authigenic expanding clay minerals (saponite and Ca-smectite) and vermiculite/chlorite (clinochlore) were identified in addition to analcime. Ferripyrophyllite was formed in three of four experiments. Comparable minerals were predicted in the PHREEQC modeling. A comparison between the phases formed in our experiments and those in the cores suggests that the natural alteration occurred under hydrothermal conditions similar to those reproduced in the experiment. ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America

Composition and properties of the Pierre Shale and equivalent rocks, northern Great Plains region

The Pierre Shale and equivalent rocks of Late Cretaceous age consist in the east-central Dakotas of several hundred feet of offshore-marine shale and minor marl; in west-central Montana near the sediment source the equivalents of the Pierre Shale consist of several thousand feet of volcanic-rich and mostly nonmarine sediments; and in the area between, both types of rock are separated by tongues of nearshore-marine siltstone and sandstone that mark three major transgressions of the sea across the area. The major-, minor-, and trace-element composition was determined for 226 samples of these rocks, and the mineralogical composition was determined for 1,350 samples. Slurry pH, Atterberg limits, and grain and bulk densities were determined on some samples. The arithmetic mean, in percent, and standard deviation (in parentheses) of major and minor elements, mostly in shale and siltstone and excluding the 23 chemically analyzed bentonite samples, are as follows: SiO2 60.8 (7.9) Al2O3 14.4 (2.5) Fe2O3 3.4 (1.4) FeO 1.1 (1.2) MgO 2.2 (1.0) CaO 2.7 (0.48) Na2O 1.1 (0.56) K2O 2.4 (0.57) H2O- 3.2 (1.3) H2O+ 4.3 (1.2) TiO2 0.58 (0.12) P2O5 0.14 (0.073) S 0.37 (1.1) F 0.71 (0.15) Cl 0.16 (0.024) CO2 2.1 (7.0) C, organic 0.94 (1.8) The mean and standard deviation of minerals as determined by X-ray methods, excluding bentonite samples, is as follows: clay minerals, 53 (20); quartz, 24 (13); cristobalite, 1 (5); potassium-feldspar, 1 (2); plagioclase, 6 (7); anorthite content from 20 to 40 percent; calcite, 5 (14); dolomite, 4 (7); organic matter, 1 (2); and sparsely scattered gypsum, jarosite, pyrite, zeolites, augite, siderite, and probably minor amounts of hydrated iron-manganese (Fe-Mn) oxides. The mean and standard deviation of the clay-mineral fraction is as follows: mixed-layer illite-smectite, 70 (20); illite, 16 (9); chlorite, 3 (6); and kaolinite, 9 (13). The mixed-layer clay, except in the Montana disturbed belt, is a random interlayering of 20 to 60 percent illite-type layers, about 35 percent beidelite-type layers, and the remainder montmorillonite-type layers; chlorite or vermiculite layers are rare. Most bentonite differs from shale in its small quartz content, rarely more than a few percent, in the more calcic composition and hightemperature thermal state of its plagioclase, and in its rare kaolinite, near absence of chlorite, and lack of illite-either free or mixed layered with smectite. Bentonite commonly consists of more than 90 percent smectite in which montmorillonite is interlayered with a smaller amount of beidellite. The clay-mineral composition of marine rock, including proportions of layers in the dominant illite-smectite, averages about the same as in the nonmarine rock, though in the latter the composition is more variable. The average content of major chemical constituents also is closely similar, partly because the large clay content of fine-grained offshore-marine shale is balanced by the small clay content of nearshore-marine siltstone and sandstone. In addition, the alumina and alkalic elements in an average of 10 percent more clay in marine rock are partly balanced by these constituents in the 5 percent more feldspar in nonmarine rock. Much of the observed regional and stratigraphic variation in maj or constituents is the result of the three major east-west migrations of the depositional sites of nearshore-marine sandstone and siltstone. Dolomite is found almost exclusively in relatively coarse-grained rock, particularly in nearshore-marine siltstone where diagenetic dolomite is expected, but it is found almost as frequently in nonmarine siltstone. Amounts of minor constituents are nearly equal in marine and nonmarine rocks, except that pyrite and consequently sulfur are relatively sparse in nonmarine rock. Average amounts of organic matter found in marine and nonmarine rocks are nearly identical. However, organic matter in nonmarine rock occurs almost entirely in volumetric

North Dakota, South Dakota, Montana

Composition of tidal flat sediments, Willapa Bay, Washington

The purpose of this study was to characterize the modern sediments of sandy tidal flats in Willapa Bay, Washington based on their composition. Generally, clay comprises less than five percent of the sediment. Clay content increases upslope and up-estuary. Principal clay minerals are montmorillanite, illite, and chlorite; two clay mineral suites are present: (1) muddy flat suite with clay containing 44% montmorillonite, and (2) sandy flat suite with clay composition of 88% montmorillonite. Heavy minerals make up approximately four percent of the tidal flat sediment. Distribution of heavy minerals reflect their source with (1) heavy minerals most abundant near the beach on flats to the north where they were eroded out of terrace deposits, and (2) relatively greater heavy mineral concentrations (supplied by the Naselle River) across the entire flat to the south. The composition of the heavy mineral suite is mainly clinopyroxene, orthopyroxene, hornblende, epidote, and opaque minerals. This mineral suite represents several sources including rivers, ocean and ocean beaches, and reworked local Tertiary and Quaternary deposits. Tidal flat sediments are approximately 90% light minerals, mostly quartz. The light fraction also contains small quantities of lithic fragments, pumice, vegetation, and biogenic shell fragments. Tertiary and Quaternary terrace deposits are the major source of most of the light material. Fossils make up less than one percent of the bottom sediment. Two foram assemblages are present: (1) a modern shallow-water assemblage characterized by Trochammina inflata, found mainly in muddy flats near rivers, and (2) a relic deep-water assemblage (Eocene to Cretaceous) characterized by such species as Bathysiphon and Cyclammina found predominantly on the sandy flats. Macrofossils consists of shells of the modern tidal flat mollusc assemblage. Organic sediments were mostly carbon (1%). The highest concentrations of organic carbon are associated with muddy sediments near the Palix River and Pickernell Creek; overall, organic carbon concentration increased up-estuary. C/N ratios are transitional between open marine environments and marsh deposits of estuaries.

Washington

Clay mineralogy, fine-grained sediment dispersal, and inferred current patterns, lower Cook Inlet and Kodiak shelf, Alaska

Because lower Cook Inlet and Kodiak shelf are being explored and developed for their petroleum resources, it is essential for environmental reasons to understand the sediment dispersal routes and current patterns. The Susitna River flows into upper Cook Inlet and is the source of clay minerals in Holocene deposits found in western lower Cook Inlet. The Copper River, in the northern Gulf of Alaska, provides clay minerals to the Kodiak shelf and southeastern lower Cook Inlet. In addition, crosion of local bedrock outcrops on the shelf produces some clays that are deposited on the Kodiak shelf. Current patterns can be inferred from the clay-mineral distribution pattern. This is true even if the clay-size fraction is a minor sediment component, and in areas where coarse-grained relict deposits occur. Some potential dangers from offshore petroleum development include: (1) rapid and complete mixing of Cook Inlet waters, (2) adsorption of pollutants by clay deposited in quiet bays, and (3) ion-exchange and adsorption of chemical pollutants on clays that are part of the suspended sediment load in lower Cook Inlet.

Alaska

Quantitative mineralogy of the Yukon River system: Changes with reach and season, and determining sediment provenance

The mineralogy of Yukon River basin sediment has been studied by quantitative X-ray diffraction. Bed, beach, bar, and suspended sediments were analyzed using the RockJock computer program. The bed sediments were collected from the main stem and from selected tributaries during a single trip down river, from Whitehorse to the Yukon River delta, during the summer of 2001. Beach and bar sediments were collected from the confluence region of the Tanana and Yukon Rivers during the summer of 2003. Suspended sediments were collected at three stations on the Yukon River and from a single station on the Tanana River at various times during the summers of 2001 through 2003, with the most complete set of samples collected during the summer of 2002. Changes in mineralogy of Yukon River bed sediments are related to sediment dilution or concentration effects from tributary sediment and to chemical weathering during transport. Carbonate minerals compose about 2 wt% of the bed sediments near Whitehorse, but increase to 14 wt% with the entry of the White River tributary above Dawson. Thereafter, the proportion of carbonate minerals decreases downstream to values of about 1 to 7 wt% near the mouth of the Yukon River. Quartz and feldspar contents of bed sediments vary greatly with the introduction of Pelly River and White River sediments, but thereafter either increase irregularly (quartz from 20 to about 50 wt%) or remain relatively constant (feldspar at about 35 wt%) with distance downstream. Clay mineral content increases irregularly downstream from about 15 to about 30 wt%. The chief clay mineral is chlorite, followed by illite + smectite; there is little to no kaolinite. The total organic carbon content of the bed sediments remains relatively constant with distance for the main stem (generally 1 to 2 wt%, with one exception), but fluctuates for the tributaries (1 to 6 wt%). The mineralogies of the suspended sediments and sediment flow data were used to calculate the amount of mineral dissolution during transport between Eagle and Pilot Station, a distance of over 2000 km. We estimate that approximately 3 wt% of the quartz, 15 wt% of the feldspar (1 wt% of the alkali and 25 wt% of the plagioclase), and 26 wt% of the carbonates (31 wt% of the calcite and 15 wt% of the dolomite) carried by the river dissolve in this reach. The mineralogies of the suspended sediments change with the season. For example, during the summer of 2002 the quartz content varied by 20 wt%, with a minimum in mid-summer. The calcite content varied by a similar amount, and had a maximum corresponding to the quartz minimum. These modes are related to the relative amount of sediment flowing from the White River system, which is relatively poor in quartz, but rich in carbonate minerals. Suspended total clay minerals varied by as much as 25 wt%, with maxima in mid July, and suspended feldspar varied up to 10 wt%. Suspended sediment data from the summers of 2001 and 2003 support the 2002 trends. A calculation technique was developed to determine theproportion of various sediment sources in a mixed sediment by unmixing its quantitative mineralogy. Results from this method indicate that at least three sediment sources can be identified quantitatively with good accuracy. With this technique, sediment mineralogies can be used to calculate the relative flux of sediment from different tributaries, thereby identifying sediment provenance.

American Mineralogist

The influence of oxalate-promoted growth of saponite and talc crystals

The intercalating growth of new silicate layers or metal hydroxide layers in the interlayer space of other clay minerals is known from various mixed-layer clay minerals such as illite-smectite (I-S), chlorite-vermiculite, and mica-vermiculite. In a recent study, the present authors proposed that smectite-group minerals can be synthesized from solution as new 2:1 silicate layers within the low-charge interlayers of rectorite. That study showed how oxalate catalyzes the crystallization of saponite from a silicate gel at low temperatures (60ºC) and ambient pressure. As an extension of this work the aim of the present study was to test the claim that new 2:1 silicate layers can be synthesized as new intercalating layers in the low-charge interlayers of rectorite and whether oxalate could promote such an intercalation synthesis. Two experiments were conducted at 60ºC and atmospheric pressure. First, disodium oxalate solution was added to a suspension of rectorite in order to investigate the effects that oxalate anions have on the structure of rectorite. In a second experiment, silicate gel of saponitic composition (calculated interlayer charge −0.33 eq/O 10 (OH) 2 ) was mixed with a suspension of rectorite and incubated in disodium oxalate solution. The synthesis products were extracted after 3 months and analyzed by X-ray diffraction and high-resolution transmission electron microscopy (HRTEM). The treatment of ultrathin sections with octadecylammonium (n C = 18) cations revealed the presence of 2:1 layer silicates with different interlayer charges that grew from the silicate gel. The oxalate-promoted nucleation of saponite and talc crystallites on the rectorite led to the alteration and ultimately to the destruction of the rectorite structure. The change was documented in HRTEM lattice-fringe images. The crystallization of new 2:1 layer silicates also occurred within the expandable interlayers of rectorite but not as new 2:1 silicate layers parallel to the previous 2:1 silicate layers. Instead, they grew independently of any orientation predetermined by the rectorite crystal substrate and their crystallization was responsible for the destruction of the rectorite structure.

Clays and Clay Minerals

Mineralogic and textural relations in deeply buried rocks of the Simpson Group (Middle Ordovician)--implications in diagenesis and petroleum geology

The mineral composition and petrography of sandstones, shales, carbonates, and intermediate lithologies were determined on 112 core samples of the Middle Ordovician Simpson Group in the Sunray DX Parker No. 1 Mazur well, Grady County, Oklahoma. Core was recovered from present depths of about 15,900-17,200 ft and included all or parts of the Bromide, Tulip Creek, McLish, Oil Creek, and Joins Formations. The bulk-rock mineral composition of Simpson Group rocks is diverse. The mean weighted composition of 50 sandstone samples is 66% quartz, 14% clay, and 18% carbonate, as determined by X-ray powder diffraction (XRD). Some sandstones from the Oil Creek and Tulip Creek Formations contain as much as 96% quartz. These quartz-rich sandstones were cemented early by silica. Feldspar averages 2%; some sandstones from the McLish Formation contain as much as 15% feldspar. Potassium feldspar is commonly more abundant than plagioclase; potassium feldspar overgrowths are found in some of the sandstones. Most of the shales are clay-rich and quartz-poor, averaging about 85% clay minerals, 7% quartz, and 3% feldspar, by weight, as determined by XRD. Carbonate, fluorapatite, and pyrite are present in variable amounts. Such high clay/quartz ratios are not characteristic of shales and suggest that silica has been expelled by diagenetic processes during burial. The main clay mineral in the Simpson Group at these depths is illite, although iron-rich chlorite is locally concentrated in sandstones. Illite typically makes up >90 wt. % of the clay minerals in sandstones and >95 wt. % of those in shale and carbonate. Total clay content, determined from XRD, correlates closely with total gamma-ray intensity from geophysical logs, because illite is the primary potassium-bearing phase in these deeply buried rocks. Therefore, the gamma-ray log is a good indicator of "shaliness" in potential Simpson reservoirs at similar depths. Much of the carbonate was introduced into the sandstones during burial as calcite, dolomite, or ankerite cement. Early iron-free calcite is commonly replaced by iron-bearing calcite, dolomite, or ankerite. Sandstones and carbonate rocks also contain rhombic dolomite. Many of the dolomite rhombs contain overgrowths of ferroan dolomite or ankerite, as evidenced by staining. Ankerite cementation is later and less selective than earlier dolomite and commonly replaces earlier carbonate or silica cements. Dolomite commonly replaces detrital clay and calcite. Spatial and textural relations suggest that the conversion of smectite to illite contributed, in part, to the formation of dolomite and ankerite cements. Scanning electron miscroscopy reveals that much of the diagenetic illite occurs as tabular fibers in pores or as pseudomorphic intergrowths after smectite. Most chlorite in sandstones is authigenic and occurs as a pore-lining cement or as a pseudomorphic replacement after kaolinite. Secondary porosity, formed mainly from the dissolution of intergranular carbonate cements, is best developed in sandstones from the Oil Creek and Tulip Creek Formations.

Oklahoma

Organo-facies and mineral effects on sorption capacity of low-maturity Permian Barakar shales from the Auranga Basin, Jharkhand, India

Shales associated with the Lower Permian (Barakar Formation) sediments of the Auranga Coalfield, India, occur in the immature–early mature stage. The sorption capacity of Barakar shale samples has been studied through high-pressure methane (CH 4 ) adsorption and low-pressure N 2 gas adsorption (LPN 2 GA) methods, supported with proximate analyses, programmed pyrolysis, optical petrography, and with energy-dispersive spectroscopy, X-ray diffraction, and inductively coupled plasma mass spectrometry. The sorption capacity is a function of the organic and inorganic constituents present in the shale samples. The methane sorption capacity (MSC) and Langmuir volume of the shale samples vary from 0.217 to 0.314 and 0.315 to 0.429 mmol/g rock, respectively. The BET-calculated surface area of the studied shales varies from 8.12 to 30.36 m 2 /g. The sorption capacities show the importance of the total organic content (TOC) through weak but positive correlations with MSC ( r 2 = 0.45) and S 1 values (mg hydrocarbons/g rock from programmed pyrolysis; r 2 = 0.40). Moreover, apparent inverse relationships were observed between MSC and clay mineral abundances, suggesting that individual clay mineral types may influence MSC, although more work is needed. The TOC-normalized MSC (MSC*) of shale samples shows a positive trend with quartz plus clay mineral content and ash yield of r 2 = 0.64 for both. In addition, MSC* shows a negative logarithmic relationship with S 1 + S 2 ( r 2 = 0.63) and a positive linear relationship with TOC-normalized total organic matter (TOM*) ( r 2 = 0.88, when 5 low TOM* samples are excluded) indicating complex relationships possibly including bitumen retention in the sample pore spaces. The micropore study of the samples through LPN 2 GA, applying Dubinin–Radushkevich, Dubinin–Astakhov, and density functional theory models, shows the dominance of micro-mesopore concentrations in the shale matrix of ∼2 nm pore diameter. However, these pores might be present as blind or closed pores. The presence of thorium and zirconium is reflective of terrigenous detrital matter, i.e., moderately to strongly recycled sediments. The fluviatile facies of deposited shales in the Auranga Coalfield are noted by the significant presence of kaolinite (32.5–78.3%), which suggests the importance of its effect on the sorption capacity of proximal terrigenous shales.

Jharkhand

Pore networks in continental and marine mudstones: Characteristics and controls on sealing behavior

Mudstone pore networks are strong modifiers of sedimentary basin fluid dynamics and have a critical role in the distribution of hydrocarbons and containment of injected fluids. Using core samples from continental and marine mudstones, we investigate properties of pore types and networks from a variety of geologic environments, together with estimates of capillary breakthrough pressures by mercury intrusion porosimetry. Analysis and interpretation of quantitative and qualitative three-dimensional (3D) observations, obtained by dual focused ion beam–scanning electron microscopy, suggest seven dominant mudstone pore types distinguished by geometry and connectivity. A dominant planar pore type occurs in all investigated mudstones and generally has high coordination numbers (i.e., number of neighboring connected pores). Connected networks of pores of this type contribute to high mercury capillary pressures due to small pore throats at the junctions of connected pores and likely control most matrix transport in these mudstones. Other pore types are related to authigenic (e.g., replacement or pore-lining precipitation) clay minerals and pyrite nodules; pores in clay packets adjacent to larger, more competent clastic grains; pores in organic phases; and stylolitic and microfracture-related pores. Pores within regions of authigenic clay minerals often form small isolated networks (<3 μm). Pores in stringers of organic phases occur as tubular pores or slit- and/or sheet-like pores. These form short, connected lengths in 3D reconstructions, but appear to form networks no larger than a few microns in size. Sealing efficiency of the studied mudstones increases with greater distal depositional environments and greater maximum depth of burial.

Geosphere

An evaluation of the applicability of the telluric-electric and audio-magnetotelluric methods to mineral assessment on the Arabian Shield, Kingdom of Saudi Arabia

Feasibility studies of two electromagnetic methods were made in selected areas of the Jabal Hibshi (1:250,000) quadrangle, 26F, in the Kingdom of Saudi Arabia in March of 1983. The methods tested were the natural source-field telluricelectric and audio-magnetotelluric methods developed and extensively used in recent years by the U.S. Geological Survey in some of its domestic programs related to geothermal and mineral resource assessment. Results from limited studies in the Meshaheed district, the Jabal as Silsilah ring complex, and across a portion of the Raha fault zone clearly demonstrate the appropriateness of these sub-regional scale, reconnaissance-type studies to mineral resource assessment. The favorable results obtained are largely attributed to distinctive and large contrasts in the electrical resistivity of the major rock types encountered. It appears that the predominant controlling factor governing the rock resistivities is the amount of contained clay minerals. Accordingly, unaltered (specifically, non-argillic) igneous and metamorphic rocks have very high resistivities; metasedimentary rocks of the Murdama group that contain several percent clay minerals have intermediate values of resistivity; and highly altered rocks, containing abundant clay minerals, have very low values of resistivity. Water-filled fracture porosity may be a secondary, but important, factor in some settings. However, influences from variations in interstitial or intercrystalline, water-filled porosity are probably small because these types of porosity are generally low. It is reasonable to expect similar results in other areas within the Arabian Shield.

Open-File Report

Reduction of structural Fe(III) in nontronite by methanogen Methanosarcina barkeri

Clay minerals and methanogens are ubiquitous and co-exist in anoxic environments, yet it is unclear whether methanogens are able to reduce structural Fe(III) in clay minerals. In this study, the ability of methanogen Methanosarcina barkeri to reduce structural Fe(III) in iron-rich smectite (nontronite NAu-2) and the relationship between iron reduction and methanogenesis were investigated. Bioreduction experiments were conducted in growth medium using three types of substrate: H 2 /CO 2 , methanol, and acetate. Time course methane production and hydrogen consumption were measured by gas chromatography. M. barkeri was able to reduce structural Fe(III) in NAu-2 with H 2 /CO 2 and methanol as substrate, but not with acetate. The extent of bioreduction, as measured by the 1,10-phenanthroline method, was 7–13% with H 2 /CO 2 as substrate, depending on nontronite concentration (5–10 g/L). The extent was higher when methanol was used as a substrate, reaching 25–33%. Methanogenesis was inhibited by Fe(III) reduction in the H 2 /CO 2 culture, but enhanced when methanol was used. High charge smectite and biogenic silica formed as a result of bioreduction. Our results suggest that methanogens may play an important role in biogeochemical cycling of iron in clay minerals and may have important implications for the global methane budget.

Geochimica et Cosmochimica Acta

Authigenic mineral texture in submarine 1979 basalt drill core, Surtsey volcano, Iceland

Micrometer-scale maps of authigenic microstructures in submarine basaltic tuff specimens from a 1979 Surtsey volcano, Iceland, drill core acquired 15 years after eruptions terminated provide fresh perspectives for deciphering the initial alteration of oceanic basalt in a low temperature hydrothermal system. A novel investigative approach integrates synchrotron source X-ray microdiffraction (µXRD), X-ray microfluoresence (µXRF), micro-computed tomography (µCT), and scanning transmission electron microscopy (S/TEM) coupled with Raman spectroscopy to create finely resolved spatial frameworks that record a continuum of alteration in glass and olivine. Micro-analytical maps of vesicular and fractured lapilli in specimens from 157.1, 137.9, and 102.6 m depth, and borehole temperatures of 83, 93.9 and 141.3 °C measured in 1980, respectively, record the production of nanocrystalline clay mineral, zeolites, and Al-tobermorite in diverse microenvironments. Nanocrystalline clay mineral (nontronite) and zeolite (amicite) texture in linear microstructures have concentrically-oriented crystallographic preferred orientation. Raman spectra indicating degraded organic carbonaceous matter are associated with nanocrystalline clay mineral in 10–25 nm, sub-circular nanoscale cavities in altered glass at 137.9 m depth and in a concentrically-layered, crystallographically-oriented linear microstructure in altered olivine at 102.6 m. These features have little resemblance to previously described alteration features in basalt. Irregular alteration fronts between fresh and altered glass at 157.1 depth, however, show a resemblance to microchannels in older basalts. The integrated analyses describe the complex organization of previously unrecognized mineral textures in very young basalt and provide a foundational mineralogical reference for longitudinal, time-lapse characterizations of palagonitized basalt in oceanic environments.

Geochemistry, Geophysics, Geosystems