Search USGS⌕ Search

SEARCH · Search USGS

Results for “Applied Computing and Geosciences.”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,656 records · Page 4Linked to original sources
USGS2024

Remote sensing evapotranspiration in ensemble-based framework to enhance cascade routing and re-infiltration concept in integrated hydrological model applied to support decision making

Integrated hydrological models (IHMs) help characterize the complexity of surface–groundwater interactions. The cascade routing and re-infiltration (CRR) concept, recently applied to a MODFLOW 6 IHM, improved conceptualization and simulation of overland flow processes. The CRR controls the transfer of rejected infiltration and groundwater exfiltration from upslope areas to adjacent downslope areas where that water can be evaporated, re-infiltrated back to subsurface, or discharged to streams as direct runoff. The partitioning between these three components is controlled by uncertain parameters that must be estimated. Thus, by quantifying and reducing those uncertainties, next to uncertainties of the other model parameters (e.g. hydraulic and storage parameters), the reliability of the CRR is improved and the IHM is better suited for decision support modelling, the two key objectives of this work. To this end, the remotely sensed MODIS-ET product was incorporated into the calibration process for complementing traditional hydraulic head and streamflow observations. A total of approximately 150,000 observations guided the calibration of a 13-year MODFLOW 6 IHM simulation of the Sardon catchment (Spain) with daily stress periods. The model input uncertainty was represented by grid-cell-scale parameterization, yielding approximately 500,000 unknown input parameters to be conditioned. The calibration was carried out through an iterative ensemble smoother. Incorporating the MODIS-ET data improved the CRR implementation, and reduced uncertainties associated with other model parameters. Additionally, it significantly reduced the uncertainty associated with net recharge, a critical flux for water management that cannot be directly measured and rather is commonly estimated by IHM simulations.

Sardon catchment↗
USGS2025

3D Converted wave reverse time migration imaging

We describe a newly developed method for recovering high-resolution images of seismic discontinuities, such as subducting slabs, in 3D. Our method makes use of converted S → P or P → S waves observed by dense arrays of seismometers to infer the locations and relative strengths of seismic discontinuities at depth in a target region. Observed direct and converted waves are backpropagated to their times of origin. The time-reversed wavefield is then separated into its constituent P and S components via the Helmholtz decomposition, and those separated wavefields are used to compute imaging functions that characterize the locations and relative strengths of seismic discontinuities. Imaging functions may be designed to use either S → P or P → S waves, so that users can target those arrivals expected to be most dominant in a given dataset. We have previously demonstrated the efficacy of our method in two dimensions, and we now present a 3D implementation of our technique which addresses the significant computational challenges posed by the size of volumetric wavefield data in three dimensions. Through a series of synthetic examples, we demonstrate that our method is capable of recovering the fine scale structure of a subducting slab given realistic station coverage and earthquake sources. We investigate optimal seismic station geometries for our technique and explore image interpretability in regions with poor data coverage. We find that linear station geometries yield more optimal, interpretable imaging functions than collections of small arrays can. We also show that our method can successfully recover bothS → P or P → S images when realistic shear earthquake sources are used, and we explore the additional computational challenges presented by the high frequency content of S waves. Our results demonstrate the potential for our technique to recover high-resolution information about subducting slabs in real-world regions, given that relatively sparse seismic arrays with only approximately 100 stations are capable of recovering interpretable imaging functions from just a few realistic earthquake sources for multiple discontinuities at significant depth in an area of approximately 400~sq~km.

Seismica↗
USGS2026

Spatio-temporal modeling for assessing geoenergy resources: A workflow applied to gas in place variation in coal beds

The ability to estimate spatio-temporal changes in hydrocarbon reservoir properties and energy resources within pore volumes is essential for optimizing production, reservoir management, geologic energy storage, and safety in underground mining operations. In coal seams, predicting remaining methane gas-in-place (GIP) is critical for quantifying producible gas and improving mine safety and productivity through effective ventilation planning. Although such changes are commonly evaluated using physics-based numerical simulation models, these approaches often require extensive data, calibration effort, and time. This study presents a spatio-temporal geostatistical modeling approach that bridges the gap between purely spatial models and full numerical simulations. The method is applied to a case study of coal seam degasification in the Mary Lee coal group, Black Warrior Basin, Alabama, USA, to estimate GIP evolution over time within a selected mining district. The analysis uses published data from prior natural gas production history-matching of degasification using vertical wells. Empirical spatial and temporal statistics were calculated for reservoir pressure and water saturation, and spatio-temporal variogram models were fitted to experimental variograms. These models provided the structural basis for spatio-temporal kriging, integrated with spatial estimates of time-invariant parameters (porosity, density, and thickness) to estimate GIP. This approach enabled estimation of GIP changes over time, including periods without data. Boxplots of GIP estimates indicated systematic depletion and decreasing spatial variability, reflecting the impacts of degasification. Comparison with cumulative gas production from empirical well records showed approximately 85% agreement based on a relative similarity metric. Spatio-temporal GIP estimates were also used to estimate methane emissions to longwall ventilation systems and compared with reported emissions from the U.S. EPA Greenhouse Gas Reporting Program, showing similar distributions (≈80%) given data limitations. Overall, this integrated modeling approach provides time-dependent GIP estimates with broader implications for resource assessment applications.

Alabama↗
USGS2026

Efficient physics‐informed ground‐motion simulations with reduced‐order models: CyberShake implications and high‐resolution site terms for southern San Andreas fault earthquakes

Recent advances in Probabilistic Seismic Hazard Analysis (PSHA) leverage physics‐based ground‐motion simulations to estimate seismic hazard, such as the CyberShake project. However, computational costs quickly escalate when performing PSHA for numerous faults or sites and can become prohibitively expensive. To reduce computational demands, CyberShake uses reciprocity and interpolates physics‐informed corrections from simulations conducted at fewer locations, but the accuracy of these interpolations remains poorly quantified. To quantify the interpolation accuracy, we derive high‐resolution, frequency‐dependent site terms for southern California and compare them with interpolated site terms using the CyberShake approach. We accomplish this by performing a set of earthquake point‐source simulations distributed along the nonplanar fault geometry for the southern San Andreas fault (SSAF) extending from Bombay Beach to Lake Hughes. Using SeisSol, we simulate three minutes of viscoelastic seismic wave propagation for these sources and store the horizontal‐component Green’s functions for 480,000 sites. We then use a scientific machine learning approach based on interpolated proper orthogonal decomposition to construct an accurate reduced‐order model of the Green’s functions to efficiently predict effective amplitude spectra (EAS) for finite‐source rupture models of SSAF earthquakes. Using minimum curvature interpolation with tension, as used in CyberShake, we compare the interpolated site terms against our high‐resolution site terms. We identify local discrepancies with EAS differing by up to a factor of approximately three. Furthermore, we identify locations where unexpectedly high or low ground motions are missed when using the interpolated dataset for these earthquakes. We estimate that our approach may be used within CyberShake to reduce the time‐to‐solution by a factor of 336 for the entire earthquake rupture forecast. Our analysis of physics‐based site terms provides more insight into the seismic hazard due to SSAF ruptures and guides future developments by combining high‐performance computing and reduced‐order modeling techniques for PSHA.

California↗
USGS2025

Applying U-Th disequilbrium for dating siliceous sinters

Continental hydrothermal systems are critical avenues for the crustal transport of heat and mass captured for geothermal energy and mineral exploration. Thus, understanding their temporal evolution and longevity is important for resource characterization. Deposits of microlaminated siliceous sinter, common surface expressions of high temperature reservoirs (> 170 °C), have the potential to trace hydrothermal histories. Geothermal reservoirs are often located within uranium-bearing silicic volcanic rock where subsurface fluid-rock interactions extract U into hydrothermal fluids. U incorporated in the surface sinter deposit has the potential to provide a U— Th disequilibrium dating option. We focus on samples from El Tatio geyser field in the Altiplano of northern Chile, the largest geothermal system in the Andes. Our resulting 230 Th/U ages, along with the water and deposit elemental compositions, suggest concentrations of U and Th vary predictably along the sinter apron. While distal facies containing the highest U concentrations (> 50 μg/g) are least affected by detrital Th corrections, they can display suspected open-system behavior. In contrast, more medial facies, where bacterial mats and other porous textures are co mmonly concentrated, have only trace amounts of U (< 0.1 μg/g), which leads to unreliable or geologically improbable dates. Proximal facies tend to date most consistently. By comparing existing 14 C ages with 230 Th/U results, 230 Th/U ages tend to be younger than the 14 C ages, supporting the presence of a 14 C-dead carbon influence. New data confirm that the onset of geothermal activity at El Tatio goes back to the late Pleistocene.

Altiplano, El Tatio geyser field↗
USGS2026

Teach me how to pycap: A high-capacity well decision support tool using analytical solutions in Python

Regulatory agencies in humid temperate environments rely on timely evaluations of streamflow depletion and drawdown to protect aquatic ecosystems and existing water users. Numerical models offer detailed insights, but their complexity and time demands often preclude their practical use in rapid decision-making. We present pycap-dss, an open-source Python package that implements a suite of analytical solutions for estimating streamflow depletion and drawdown. The tool supports superposition of multiple wells and time-varying pumping, enabling cumulative impact assessments in situations with multiple wells and streams. The software is modular and extensible, allowing users to interchange solutions or add new analytical methods. A YAML-based configuration supports batch processing of multiple wells, and an optional AnalysisProject class facilitates integration with regulatory workflows. Rigorous unit and regression testing ensures computational reliability, and continuous integration supports ongoing development. We demonstrate deterministic examples of drawdown where multiple solutions are readily compared and streamflow depletion with multiple wells in the Central Sands region of Wisconsin. We also show the value of Monte Carlo analyses of streamflow depletion in the same Central Sands example, leveraging computational efficiency to evaluate the uncertainty of individual and cumulative streamflow depletion calculations from over 200 high-capacity wells.

Wisconsin↗
USGS2024

Flood-inundation maps for the Cuyahoga River in and near Independence, Ohio, 2024

Digital flood-inundation maps for a 9.9-mile reach of the Cuyahoga River in and near Independence, Ohio, were created by the U.S. Geological Survey (USGS) in cooperation with the Northeast Ohio Regional Sewer District Board of Trustees. Water-surface profiles were computed for the stream reach by using a one-dimensional steady-state step-backwater model. The model was calibrated to the current (2024) stage-streamflow relation (rating curve 43.0) for the USGS streamgage 04208000, Cuyahoga River at Independence, Ohio. The resulting hydraulic model was then used to compute 13 water-surface profiles for water levels (flood stages) ranging from 14.00 to 26.00 feet. The flood stages range from “action stage” to above “major flood stage” as reported by the National Weather Service. The simulated water-surface profiles were then used in combination with a digital elevation model derived from light detection and ranging data to map the inundated areas associated with each flood profile. The flood-inundation maps and the supporting hydraulic model produced by this study can be used by emergency managers and local officials to assess flood mitigation strategies and to define flood hazard areas to protect life and property, to coordinate flood response activities such as evacuations and road closures, and to aid postflood recovery efforts.

Ohio↗
USGS1999

Streamflow, base flow, and ground-water recharge in the Housatonic River basin, western Massachusetts and parts of eastern New York and northwestern Connecticut

Streamflows for selected flow durations from 1 to 99 percent and the August median streamflows were estimated for 11 long-term streamflow-gaging stations in and near the study area. Estimates of streamflow and associated standard errors were determined for selected flow durations from 50 to 99 percent and the August median streamflows for 21 low-flow partial-record stations and for selected flow durations from 1 to 99 percent and the August median streamflows for two partial-record stations and seven short-term discontinued streamflow-gaging stations. Median streamflows per square mile for the 10-, 50-, and 90-percent flow durations and the August median streamflows were 3.90, 1.01, 0.185, and 0.248 cubic feet per second per square mile. Streamflows per square mile at selected flow-duration discharges between 1 and 99 percent at the 41 stations were related to basin characteristics to explain differences in streamflow characteristics. Basin characteristics included basin elevations, extent of stratified-drift deposits, land use, aspect, and underlying bedrock geology types. Most streamflow differences were positively correlated to basin elevation differences, most likely because precipitation increases with elevation, and to stratified-drift deposits, which allow more precipitation to recharge the ground water and to discharge later than do till and bedrock deposits. Mean base flow was computed from continuous records of daily mean discharge at 11 long-term streamflow-gaging stations in and near the study area. Mean annual base flow ranged from 13.4 to 24.5 inches per year. Minimum annual base flow ranged from 45 to 72 percent of mean annual rates at the 11 long-term stations, and the ratio of base flow to streamflow (base-flow index) ranged from 0.55 to 0.80. Base-flow durations between 1 and 99 percent were calculated from streamflow records at the 11 long-term streamflow-gaging stations. Base flow accounted for 45.5 to 85.0 percent of total annual streamflow at the 1- and 99-percent flow durations. Ground-water-recharge rates were computed from continuous records of daily mean discharge at 11 long-term streamflow-gaging stations in and near the study area. Mean annual ground-water-recharge rates ranged from 17.5 to 22.4 inches per year at 10 of the 11 long-term stations. Mean annual ground-water-recharge rates ranged from 2 to 7 inches per year higher than base flow. Minimum annual ground-water-recharge rates ranged from 48 to 72 percent of mean annual ground-water-recharge rates. Mean annual potential ground-water recharge was estimated from monthly climatological data collected at six climatological stations in and near the study area. Mean potential ground-water recharge ranged from about 17.9 to 28.9 inches per year, with a median value of 22.6 inches per year. This median value compares well to that calculated by use of streamflow records at the 11 streamflow-gaging stations (20.0 inches per year). Streamflows per square mile for the 10-, 50-, and 90-percent flow durations at stations in and near the study area were similar to those computed for other unregulated long-term continuous streamflow-gaging stations in central and eastern Massachusetts. Base-flow and ground-water-recharge rates in the study area compared closely to results from other studies in southeastern Massachusetts and Rhode Island, which were based on the same computational methods.

Connecticut, Massachusetts, New York↗
USGS2026

Estimating the importance of floating surface material to the total phosphorus transport in Silver Creek, Wisconsin using Particle Image Velocimetry

Various techniques are used to estimate nutrient delivery in streams that combine flow and water-quality data. However, the transport of surface floating material is difficult to measure, and is therefore typically neglected when stream sampling and in the estimated nutrient delivery. Here, we describe an approach to estimate the amount of material (duckweed ( Lemna genus), filamentous algae, and other macrophyte fragments) and associated nutrients (in this case, phosphorus, P) transported on the surface of Silver Creek, Wisconsin, to determine if this material is an important transport mechanism and if historical P loads were underestimated. This approach includes estimating the transport of surface material using 10 s videos collected every 15 min from a downward-looking camera installed beneath a bridge. The average velocity of the surface material was first determined using Large-Scale Particle Image Velocimetry (LSPIV), which uses short videos to analyze surface particle movement. The amount of surface material in each video was then computed using computer-vision techniques. The P load associated with the transported surface material was then estimated by combining surface velocities, coverage of floating material, and laboratory-measured P content. Surface material transported ~9–11% of the total summer P load and ~4–7% of the annual load in Silver Creek.

Wisconsin↗
USGS2024

Flood-inundation maps for the Cuyahoga River at Jaite, Ohio, 2024

Digital flood-inundation maps for a nearly 6-mile reach of the Cuyahoga River at Jaite, Ohio, were created by the U.S. Geological Survey (USGS) in cooperation with the Northeast Ohio Regional Sewer District Board of Trustees. The maps depict estimates of the extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage 04206425 on the Cuyahoga River at Jaite, Ohio. Water-surface profiles were computed for the stream reach by using a one-dimensional steady-state step-backwater model. The hydraulic model was calibrated to the current USGS streamgage data and then used to compute 15 water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from 6 to 20 feet, which correspond to below “action stage” to “major flood stage” as reported by the National Weather Service. The simulated water-surface profiles were then used with a geographic information system digital elevation model derived from light detection and ranging data to delineate the areas flooded at each stage. These maps, along with current stage data from the USGS streamgage and forecasted high-flow stages from the National Weather Service, can provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Ohio↗
USGS2025

Constraining large magnitude event source and path effects using ground motion simulations

The purpose of this study is to use ground motion simulations to investigate ways in which source and path effects for large magnitude events can be represented in non-ergodic GMMs. While we initially developed computation techniques using CyberShake simulations, the range of magnitudes and source-site combinations is not adequate to replicate what is observed empirically. We therefore designed a new ground motion simulation study, which includes earthquakes with a large range of magnitudes distributed uniformly on a fault plane, and sites covering a large range of rupture distances and azimuths. After running a large suite of simulations (M4-M7), we then develop a non-ergodic GMM with the simulation data. We find that the within-site residuals are dominated by the radiation pattern, rupture directivity, and slip patterns. Next, we modify an existing rupture directivity model to fit and remove the observed radiation pattern and rupture directivity from the residuals. We also minimize the contributions of slip patterns by averaging the within-site residuals among multiple source realizations. Finally, after removing the source effects from the within-site residuals, we compare the path effects computed with different magnitude groups using two approaches. The first approach only considers the small events that have the same shortest path to a site with the large events, while the second approach considers all small events on the fault plane. The results indicate that the path effects of large events cannot be satisfactorily approximated with that of small events using either approach.

Conference Paper↗
USGS2026

Flood-inundation maps for Río Grande De Loíza in and near Caguas, Puerto Rico, 2026

Digital flood-inundation maps for a 2.7-mile reach of Río Grande De Loíza in Caguas, Puerto Rico, were created by the U.S. Geological Survey. Water-surface profiles were computed for the stream reach by using a one-dimensional, steady-state, step-backwater model. The model was calibrated to the current (2025) stage-streamflow relation (rating curve) for the U.S. Geological Survey streamgage 50055000, Río Grande De Loíza, Puerto Rico. The resulting hydraulic model was then used to compute 16 water-surface profiles for water levels (flood stages) ranging from 19.00 to 34.00 feet at the streamgage; these flood stages range from “moderate flood stage” to above “major flood stage” as defined by the National Weather Service. The 34.00-foot stage exceeds the historical maximum peak stage of 33.20 feet, recorded at the streamgage in 1945. The simulated water-surface profiles were used in combination with a digital elevation model derived from light detection and ranging (lidar) data to map the inundated areas associated with each flood profile. The flood-inundation maps and the supporting hydraulic model produced by this study can be used by emergency managers and local officials to assess flood-mitigation strategies and to define flood-hazard areas to help protect life and property, to coordinate flood-response activities such as evacuations and road closures, and to aid post-flood recovery efforts.

Puerto Rico↗
USGS2024

Reference 1D seismic velocity models for volcano monitoring and imaging: Methods, models, and applications

Seismic velocity models of the crust are an integral part of earthquake monitoring systems at volcanoes. 1D models that vary only in depth are typically used for real‐time hypocenter determination and serve as critical reference models for detailed 3D imaging studies and geomechanical modeling. Such models are usually computed using seismic tomographic methods that rely on P ‐ and S ‐wave arrival‐time picks from numerous earthquakes recorded at receivers around the volcano. Traditional linearized tomographic methods that jointly invert for source locations, velocity structure, and station corrections depend critically on having reasonable starting values for the unknown parameters, are susceptible to local misfit minima and divergence, and often do not provide adequate uncertainty information. These issues are often exacerbated by sparse seismic networks, inadequate distributions of seismicity, and/or poor data quality common at volcanoes. In contrast, modern probabilistic global search methods avoid these issues only at the cost of increased computation time. In this article, we review both approaches and present example applications and comparisons at several volcanoes in the United States, including Mount Hood (Oregon), Mount St. Helens (Washington), the Island of Hawai’i, and Mount Cleveland (Alaska). We provide guidance on the proper usage of these methods as relevant to challenges specific to volcano monitoring and imaging. Finally, we survey‐published 1D P ‐wave velocity models from around the world and use them to derive a generic stratovolcano velocity model, which serves as a useful reference model for comparison and when local velocity information is sparse.

Seismological Research Letters↗
USGS2025

Quantitative mineral resource assessment of lithium pegmatite deposits in the Appalachian Orogen, USA

Lithium is classified as a U.S. critical mineral commodity, and its demand is projected to drastically increase through 2040, driven by electric vehicle production and energy storage applications (IEA 2021).Most global lithium production is not in the United States increasing vulnerability to a supply disruption. The U.S. Geological Survey is actively assessing domestic lithium deposits including lithium-bearing pegmatites in the Appalachian orogen. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical, and mineral occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. Estimates were then integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was used to estimate the amount of potentially recoverable undiscovered resources. Preliminary computations for the northern Appalachians, including application of the economic filter to the median recoverable contained resource, yields 900,000 metric tons of Li 2 O that correspond to enough Li 2 O to replace 127 years of import reliance at the current rate (7,100 t Li 2 O/yr; USGS, 2025). For the southern Appalachians, preliminary computations yielded 1,430,000 metric tons of Li 2 O, which corresponds to 201 years of import reliance.

Alabama, Connecticut, Delaware, Georgia, Maine, Ma↗
USGS2025

Flood-inundation maps for Río de la Plata in and near Comerío, Puerto Rico, 2025

Digital flood-inundation maps for a 3.1-mile reach of Río de la Plata in and near Comerío, Puerto Rico, were created by the U.S. Geological Survey (USGS). Water-surface profiles were computed for the stream reach by using a one-dimensional steady-state step-backwater model. The model was calibrated to the current (2025) stage-streamflow relation (rating curve 11.0) for the USGS streamgage 50043800, Río de la Plata at Comerío, Puerto Rico. The resulting hydraulic model was then used to compute 16 water-surface profiles for water levels (flood stages) ranging from 10.00 to 40.00 feet at the streamgage and ranging from “action stage” to above “major flood stage” as reported by the National Weather Service. The 40.00-foot stage was selected because it exceeds the peak stage of 34.86 ft recorded during Hurricane Maria at the USGS streamgage 50043800, Río de Plata at Comerío, Puerto Rico. The simulated water-surface profiles were then used in combination with a digital elevation model derived from light detection and ranging data to map the inundated areas associated with each flood profile. The flood-inundation maps and the supporting hydraulic model produced by this study can be used by emergency managers and local officials to assess flood mitigation strategies and to define flood hazard areas to help protect life and property, to coordinate flood response activities such as evacuations and road closures, and to aid post-flood recovery efforts.

Comerio↗
USGS2026

Ground motions from finite faults with unknown geometry

Earthquake emergency response and loss modeling require accurate models of ground‐motion intensity metrics (IMs), such as those produced by ShakeMap. In the critical minutes and hours after an earthquake, however, knowledge of the earthquake source geometry limits the accuracy of these models, especially in areas where seismic instrumentation is insufficient to constrain the shaking intensity pattern. Previous attempts to overcome this limitation have centered on computing the mean distance metrics from a suite of assumed source geometries. That approach is inadequate with modern ground‐motion models (GMMs) because they typically include terms for the hanging wall effect, depth to top of rupture, and other nonlinear terms. Such approaches also propagate the distance uncertainty through the GMMs and may not properly allocate the additional uncertainty into the between‐ and within‐event components. Here we present Finite‐Fault SIMulation with Mixed Effects Regression (FFSIMMER), a method to address these limitations by computing IM distributions from a suite of rupture realizations that fully accounts for all geometry‐related GMM terms and allows for the separation of the between‐ and within‐event components of the total uncertainty. The accuracy of this method is limited by the available constraints on the source parameters. To address this, FFSIMMER can incorporate constraints based on knowledge of the source, such as the approximate strike and dip based on knowledge of the plate tectonics and focal mechanism of the earthquake. We demonstrate the improvement in accuracy that can be achieved with the 2025 M 7.7 Mandalay, Burma (Myanmar), earthquake by incorporating constraints on the range of plausible source parameters.

Bulletin of the Seismological Society of America↗
USGS1995

Methods for estimating the magnitude and frequency of peak discharges of rural, unregulated streams in Virginia

Methods are presented for estimating the peak discharges of rural, unregulated streams in Virginia. A Pearson Type III distribution is fitted to the logarithms of the unregulated annual peak-discharge records from 363 stream-gaging stations in Virginia to estimate the peak discharge at these stations for recurrence intervals of 2 to 500 years. Peak-discharge characteristics for 284 unregulated stations are divided into eight regions based on physiographic province, and regressed on basin characteristics, including drainage area, main channel length, main channel slope, mean basin elevation, percentage of forest cover, mean annual precipitation, and maximum rainfall intensity. Regression equations for each region are computed by use of the generalized least-squares method, which accounts for spatial and temporal correlation between nearby gaging stations. This regression technique weights the significance of each station to the regional equation based on the length of records collected at each cation, the correlation between annual peak discharges among the stations, and the standard deviation of the annual peak discharge for each station. Drainage area proved to be the only significant explanatory variable in four regions, while other regions have as many as three significant variables. Standard errors of the regression equations range from 30 to 80 percent. Alternate equations using drainage area only are provided for the five regions with more than one significant explanatory variable. Methods and sample computations are provided to estimate peak discharges at gaged and engaged sites in Virginia for recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years, and to adjust the regression estimates for sites on gaged streams where nearby gaging-station records are available.

Virginia↗
USGS2024

Revision of ModelMuse to support the use of PEST software with MODFLOW and SUTRA models

Executive Summary ModelMuse is a graphical user interface for several groundwater modeling programs. ModelMuse was updated to generate the input files for the parameter estimation software suite PEST. The software is used with MODFLOW or SUTRA models to run PEST-based parameter estimation and display the updated model inputs after parameter estimation. The PEST input files can also be used with the PEST++ version 5 software suite. Parameter estimation typically requires defining the parameters being adjusted during calibration and observations for assessing calibration quality. After a parameter is defined in ModelMuse, it can be applied to all or part of a model dataset. Pilot points—a parameterization device that facilitates higher levels of parameterization—can be used to assign spatially variable distributions of model inputs. Parameters can be applied to temporally varying features, such as boundary conditions, by either applying them to all the values in a series in one step or by applying separate parameters to individual members of a series. ModelMuse allows the definition of many observation types from various model output files. For MODFLOW 6 and SUTRA models, new options were added to ModelMuse to allow it to display the changed input after parameter estimation is complete. For MODFLOW–2005 and MODFLOW–NWT models, ModelMuse can import an entire model for visualization. An example illustrates the use of PEST with a MODFLOW 6 model in ModelMuse.

Techniques and Methods↗