Search USGS⌕ Search

SEARCH · Search USGS

Results for “Analytica Chimica Acta”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

66 records · Page 4Linked to original sources
USGS1976

Determination of lead in rocks by radiometric isotope dilution and substoichiometric extraction

A rapid procedure is described for the determination of lead in rocks by an isotope-dilution substoichiometric method. After the sample has been digested with acid in the presence of 210 Pb tracer, the lead is separated by dithizone extractions. After the lead has been back-extracted into aqueous solution, it is reacted with a substoichiometric amount of EDTA. Excess of unreacted lead is removed by extraction with dithizone in carbon tetrachloride, and the specific activity of the aqueous complex is determined by counting 210 Pb. The standard deviation of the method is less than 10 % for replicate determinations of lead in several U.S. Geological Survey standard rocks. The agreement with literature values indicates that the method is accurate.

Analytica Chimica Acta↗
USGS1965

Solution of rocks and refractory minerals by acids at high temperatures and pressures. Determination of silica after decomposition with hydrofluoric acid

A modified Morey bomb was designed which contains a removable nichromecased 3.5-ml platinium crucible. This bomb is particularly useful for decompositions of refractory samples for micro- and semimicro-analysis. Temperatures of 400–450° and pressures estimated as great as 6000 p.s.i. were maintained in the bomb for periods as long as 24 h. Complete decompositions of rocks, garnet, beryl, chrysoberyl, phenacite, sapphirine, and kyanite were obtained with hydrofluoric acid or a mixture of hydrofluoric and sulfuric acids; the decomposition of chrome refractory was made with hydrochloric acid. Aluminum-rich samples formed difficultly soluble aluminum fluoride precipitates. Because no volatilization losses occur, silica can be determined on sample solutions by a molybdenum-blue procedure using aluminum(III) to complex interfering fluoride.

Analytica Chimica Acta↗
USGS1979

Determination of nanogram amounts of bismuth in rocks by atomic absorption spectrometry with electrothermal atomization

Bismuth concentrations as low as 10 ng g -1 in 100-mg samples of geological materials can be determined by atomic absorption spectrometry with electrothermal atomization. After HF—HClO 4 decomposition of the sample, bismuth is extracted as the iodide into methyl isobutyl ketone and is then stripped with ethylenediaminetetraacetic acid into the aqueous phase. Aliquots of this solution are pipetted into the graphite furnace and dried, charred, and atomized in an automated sequence. Atomic absorbance at the Bi 223.1-nm line provides a measure of the amount of bismuth present. Results are presented for 14 U.S. Geological Survey standard rocks.

Analytica Chimica Acta↗
USGS1979

Determination of arsenic in geological materials by electrothermal atomic-absorption spectrometry after hydride generation

Rock and soil samples are decomposed with HClO 4 —HNO 3 ; after further treatment, arsine is generated and absorbed in a dilute silver nitrate solution. Aliquots of this solution are injected into a carbon rod atomizer. Down to 1 ppm As in samples can be determined and there are no significant interferences, even from chromium in soils. Good results were obtained for geochemical reference samples.

Analytica Chimica Acta↗
USGS1980

Extraction and concentration of phenolic compounds from water and sediment

Continuous liquid-liquid extractors are used to concentrate phenols at the ??g l-1 level from water into dichloromethane; this is followed by Kuderna-Danish evaporative concentration and gas chromatography. The procedure requires 5 h for 18 l of sample water. Overall concentration factors around 1000 are obtained. Overall concentration efficiencies vary from 23.1 to 87.1%. Concentration efficiencies determined by a batch method suitable for sediments range from 18.9 to 73.8%. ?? 1980.

Analytica Chimica Acta↗
USGS1982

Multi-element analysis of manganese nodules by atomic absorption spectrometry without chemical separation

Five manganese nodules, including the USGS reference nodules A-1 and P-1, were analyzed for Co, Cu, Fe, K, Mg, Mn, Na, Ni and Zn without prior chemical separation by using a simultaneous multi-element atomic absorption spectrometer with an air—cetylene flame. The nodules were prepared in three digestion matrices. One of these solutions was measured using sixteen different combinations of burner height and air/acetylene ratios. Results for A-1 and P-1 are compared to recommended values and results for all nodules are compared to those obtained with an inductively coupled plasma. The elements Co, Cu, Fe, K, Mg, Mn, Na, Ni, and Zn are simultaneously determined with a composite recovery for all elements of 100 ± 7%, independent of the digestion matrices, heights in the flame, or flame stoichiometries examined. Individual recoveries for Co, K, and Ni are considerably poorer in two digests than this composite figure, however. The optimum individual recoveries of 100 ± 5% and imprecisions of 1–4%, except for zinc, are obtained when Co, K, Mn, Na and Ni are determined simultaneously in a concentrated digest, and in another analytical sequence, when Cu, Fe, Mg, Mn and Zn are measured simultaneously after dilution. Determination of manganese is equally accurate in the two sequences; its measurement in both assures internal consistency between the two measurement sequences. This approach improves analytical efficiency over that for conventional atomic absorption methods, while minimizing loss of accuracy or precision for individual elements.

Analytica Chimica Acta↗
USGS1982

An improved method for the determination of trace levels of arsenic and antimony in geological materials by automated hydride generation–Atomic absorption spectroscopy

An improved, automated method for the determination of arsenic and antimony in geological materials is described. After digestion of the material in sulfuric, nitric, hydrofluoric and perchloric acids, a hydrochloric acid solution of the sample is automatically mixed with reducing agents, acidified with additional hydrochloric acid, and treated with a sodium tetrahydroborate solution to form arsine and stibine. The hydrides are decomposed in a heated quartz tube in the optical path of an atomic absorption spectrometer. The absorbance peak height for arsenic or antimony is measured. Interferences that exist are minimized to the point where most geological materials including coals, soils, coal ashes, rocks and sediments can be analyzed directly without use of standard additions. The relative standard deviation of the digestion and the instrumental procedure is less than 2% at the 50 μg l -1 As or Sb level. The reagent-blank detection limit is 0.2 μg l -1 As or Sb.

Analytica Chimica Acta↗
USGS1969

Determination of traces of silver in waters by anion exchange and atomic absorption spectrophotometry

A method has been developed for the accurate determination of 0.1–1 μg of silver per liter of water. The method permits stabilization of silver in water without loss to container walls. Optimum conditions have been established for the complete recovery of silver from water with an anion-exchange column, for quantitative elution of silver from the resin, and for measurement of silver by atomic absorption spectrophotometry after chelation with ammonium pyrrolidine dithiocarbamate and extraction of the chelate with MIBK. Silver in the 1–10 μg 1 "> μg1 range can be determined by extraction without pre-concentration on an ion-exchange resin.

Analytica Chimica Acta↗
USGS2002

In situ osmotic analyzer for the year-long continuous determination of Fe in hydrothermal systems

A submersible osmotically pumped analyzer (Fe-OsmoAnalyzer) has been adapted for the long-term continuous high resolution monitoring of iron(II) and (III) in deep-sea hydrothermal vents. Ferrozine is used as the colorimetric reagent. The detection limit for our analyzer is 0.1??M for a 0.7cm pathlength with a linear response up to 50??M. The Fe-OsmoAnalyzer uses periodic injections of standards and blanks to self calibrate and can operate unattended for over a year collecting data every 15min. The Fe-OsmoAnalyzer was field tested during a 6 week test deployment at 900m in Monterey Bay and a year-long deployment at 1100m off the coast of Hawaii. A second year-long deployment in a low temperature hydrothermal vent on the Juan de Fuca Ridge provided high resolution continuous monitoring of Fe and was able to distinguish tidally influenced fluctuations in Fe concentrations. ?? 2002 Elsevier Science B.V. All rights reserved.

Analytica Chimica Acta↗
USGS1999

Cu(II) binding by a pH-fractionated fulvic acid

The relationship between acidity, Cu(II) binding and sorption to XAD resin was examined using Suwannee River fulvic acid (SRFA). The work was based on the hypothesis that fractions of SRFA eluted from an XAD column at various pH's from 1.0 to 12.0 would show systematic variations in acidity and possibly aromaticity which in turn would lead to different Cu(II) binding properties. We measured equilibrium Cu(II) binding to these fractions using Cu2+ ion-selective electrode (ISE) potentiometry at pH 6.0. Several model ligands were also examined, including cyclopentane-1,2,3,4-tetracarboxylic acid (CP-TCA) and tetrahydrofuran-2,3,4,5-tetracarboxylic acid (THF-TCA), the latter binding Cu(II) much more strongly as a consequence of the ether linkage. The SRFA Cu(II) binding properties agreed with previous work at high ionic strength, and binding was enhanced substantially at lower ionic strength, in agreement with Poisson-Boltzmann predictions for small spheres. Determining Cu binding constants (K(i)) by non-linear regression with total ligand concentrations (L(Ti)) taken from previous work, the fractions eluted at varying pH had K(i) similar to the unfractionated SRFA, with a maximum enhancement of 0.50 log units. We conclude that variable-pH elution from XAD does not isolate significantly strong (or weak) Cu(II)-binding components from the SRFA mixture.

Analytica Chimica Acta↗
USGS1999

Simultaneous determination of Ca, Cu, Ni, Zn and Cd binding strengths with fulvic acid fractions by Schubert's method

The equilibrium binding of Ca 2+ , Ni 2+ , Cd 2+ , Cu 2+ and Zn 2+ with unfractionated Suwannee river fulvic acid (SRFA) and an enhanced metal binding subfraction of SRFA was measured using Schubert’s ion-exchange method at pH 6.0 and at an ionic strength ( μ ) of 0.1 (NaNO 3 ). The fractionation and subfractionation were directed towards obtaining an isolate with an elevated metal binding capacity or binding strength as estimated by Cu 2+ potentiometry (ISE). Fractions were obtained by stepwise eluting an XAD-8 column loaded with SRFA with water eluents of pH 1.0 to pH 12.0. Subfractions were obtained by loading the fraction eluted from XAD-8 at pH 5.0 onto a silica gel column and eluting with solvents of increasing polarity. Schuberts ion exchange method was rigorously tested by measuring simultaneously the conditional stability constants ( K ) of citric acid complexed with the five metals at pH 3.5 and 6.0. The log K of SRFA with Ca 2+ , Ni 2+ , Cd 2+ , Cu 2+ and Zn 2+ determined simultaneously at pH 6.0 follow the sequence of Cu 2+ > Cd 2+ > Ni 2+ > Zn 2+ > Ca 2+ while all log K values increased for the enhanced metal binding subfraction and followed a different sequence of Cu 2+ > Cd 2+ > Ca 2+ > Ni 2+ > Zn 2+ . Both fulvic acid samples and citric acid exhibited a 1 : 1 metal to ligand stochiometry under the relatively low metal loading conditions used here. Quantitative 13 C "> 13C nuclear magnetic resonance spectroscopy showed increases in aromaticity and ketone content and decreases in aliphatic carbon for the elevated metal binding fraction while the carboxyl carbon, and elemental nitrogen, phosphorus, and sulfur content did not change. The more polar, elevated metal binding fraction did show a significant increase in molecular weight over the unfractionated SRFA.

Analytica Chimica Acta↗