SEARCH · Search USGS

Results for “Analyst”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

USGS2022

Decision analysis and CO2–Enhanced oil recovery development strategies

This paper analyzes the relationship between actual reservoir conditions and predicted measures of performance of carbon dioxide enhanced oil recovery (CO 2 –EOR) programs. It then shows how CO 2 –EOR operators might maximize the value of their projects by approaching implementation using a “flexible selective” pattern development strategy, where the CO 2 –EOR program patterns are selectively developed based on site-specific reservoir properties. It also analyzes performance measures and economic consequences of utilizing a continuous CO 2 injection strategy intended to maximize CO 2 retention for a defined time period. “Net CO 2 utilization,” calculated as difference between the volumes of CO 2 injected and CO 2 recovered in the production stream divided by the oil produced, is a standard measure of CO 2 –EOR carbon utilization, but it can be a misleading predictor of the actual CO 2 retained in the reservoir. Asset value can be added to a CO 2 –EOR project by recognizing effects of variations in reservoir parameter values and basing incremental development decisions on those data. For policy analysts, the consequences of ignoring geologic variability within a reservoir that is a candidate for CO 2 –EOR will likely be to substantially overestimate predicted adoption of CO 2 –EOR in response to economic incentives. This result holds true whether the CO 2 –EOR program objective is to maximize net value by maximizing oil production or maximize CO 2 storage with oil recovery.

Natural Resources Research↗

USGS1992

The international seismological observing period in Africa

The International Seismological Observing Period (ISOP) is a specific time interval designated for enhanced international cooperation in the collection and dissemination of observatory measurements from the global seismographic network. The primary purpose of the ISOP is to strengthen the international infrastructure that supports current seismological practice and increase the cooperation among nations that operate seismological observatories. Measurements, reported by the existing global network and compiled by agencies such as the International Seismological Centre (ISC), are providing new information about earthquakes and the structure of the Earth of fundamental importance to the Earth sciences. However, these data represent but a small fraction of the information contained in the seismograms. One of the goals of the ISOP is to collect improved sets of data. In particular, the measurement and reporting of later-arriving phases, during a fixed ISOP period, from earthquakes selected for detailed observation by the cooperating stations will be encouraged. The use of advanced, digital instrumentation provides an unprecedented opportunity for enhancing the methods of seismogram interpretation and seismic parameter extraction, by the implementation of digital processing methods at seismic observatories worldwide. It must be ensured that this new information will be available to the entire seismological community. It is believed that this purpose is best served with an ISOP that promotes increased on-site processing at digital stations in Africa and elsewhere. Improvements in seismology require truly international cooperation and the educational aspects of seismological practice form one of the goals of the ISOP. Thus, workshops will be needed in Africa to train analysts in ISOP procedures and to introduce them to modern techniques and applications of the data. Participants will, thus, benefit from theoretical results and practical experience that are of direct relevance to their own work.

Tectonophysics↗

USGS1981

Role of numerical simulation in analysis of ground-water quality problems

The increasing public awareness and concern about the hazards of toxic chemicals contaminating aquifers has created an increased need for predictive capabilities to analyze ground-water contamination problems. Several digital models to simulate the movement and concentration of ground-water contaminants have been documented recently. Most simulate the transport and dispersion of a nonreactive solute, but some include mathematically simple reaction terms to represent decay and sorption processes. For applications to field problems, these solute-transport models impose data requirements that, in general, exceed our practical capabilities to accurately describe the field properties and stresses of the hydraulic and chemical systems. Thus, interpretations based on model analyses must recognize the significance of uncertainties in input data. Models of ground-water systems should be regarded as just one tool among many that can be used in the analysis of a ground-water quality problem. Numerical simulation can help the analyst integrate available data, evaluate conceptual models, test hypotheses pertaining to flow and quality changes, and predict system responses to alternative stresses. The models do not replace field data, but they do offer a feedback mechanism that can help to guide the design of a more effective and more efficient data-collection program.

Science of the Total Environment↗

USGS1985

Results of interlaboratory comparison of fission-track age standards: Fission-track workshop-1984

Five samples were made available as standards for the 1984 Fission Track Workshop held in the summer of 1984 (Rensselaer Polytechnic Institute, Troy, New York). Two zircons, two apatites and a sphene were distributed prior to the meeting to 40 different laboratories. To date, 24 different analysts have reported results. The isotopic ages of the standards ranged from 16.8 to 98.7 Myr. Only the statement that the age of each sample was less than 200 Myr was provided with the set of standards distributed. Consequently, each laboratory was required to use their laboratory's accepted treatment (irradiation level, etching conditions, counting conditions, etc.) for these samples. The results show that some workers have serious problems in achieving accurate age determinations. This emphasizes the need to calibrate experimental techniques and counting procedures against age standards before unknown ages are determined. Any fission-track age determination published or submitted for publication can only be considered reliable if it is supported by evidence of consistent determinations on age standards. Only this can provide the scientific community with the background to build up confidence concerning the validity of the fission-track method. ?? 1985.

Nuclear Tracks and Radiation Measurements (1982)↗

USGS2025

Statistical approaches for modeling correlated grade and tonnage distributions and applications for mineral resource assessments

Correlations between grade and tonnage exist in mineral resource data compiled from published reports, but they are not always addressed during quantitative assessment of undiscovered mineral resources. Failure to account for correlated grade and tonnage distributions can result in geologically unrealistic assessment results. Current software tools simulate univariate ore tonnage and multivariate resource grades of undiscovered deposits independently. As a result, analysts are forced to rely on ad-hoc solutions to minimize the correlation issues by: 1) creating subsets of data with restricted criteria; 2) truncating grade and tonnage distributions; and 3) testing model robustness using exploratory data analysis. While these methods represent pragmatic solutions, the statistical solutions presented here provide additional options to address real correlations in grade and tonnage data used for mineral resource assessments. We present a modified version of the MapMark4 package in R that introduces two alternatives for modeling grade and tonnage distributions, consisting of a multivariate solution that accounts for correlations between ore tonnage and metal grades and an empirical solution that utilizes simple random sampling with replacement to reproduce coupled grades and tonnages from the input data. We present simulations for contained ore and metal for three case studies representing tungsten skarn, komatiite-hosted nickel, and sediment-hosted carbonate amagmatic zinc-lead (Mississippi Valley-type) deposits. Employing the methods presented here yields quantitative mineral resource assessment results that more closely reflect the empirical distributions of grades and tonnages observed in nature and expands the applicability of these tools for ongoing critical mineral resource assessments.

Applied Computing and Geosciences↗

USGS2006

Useful ion yields for Cameca IMS 3f and 6f SIMS: Limits on quantitative analysis

The useful yields (ions detected/atom sputtered) of major and trace elements in NIST 610 glass were measured by secondary ion mass spectrometry (SIMS) using Cameca IMS 3f and 6f instruments. Useful yields of positive ions at maximum transmission range from 10-4 to 0.2 and are negatively correlated with ionization potential. We quantified the decrease in useful yields when applying energy filtering or high mass resolution techniques to remove molecular interferences. The useful yields of selected negative ions (O, S, Au) in magnetite and pyrite were also determined. These data allow the analyst to determine if a particular analysis (trace element contents or isotopic ratio) can be achieved, given the amount of sample available and the conditions of the analysis. ?? 2005 Elsevier B.V. All rights reserved.

Chemical Geology↗

USGS2006

Influence of particle and surface quality on the vitrinite reflectance of dispersed organic matter: Comparative exercise using data from the qualifying system for reflectance analysis working group of ICCP

The development of a qualifying system for reflectance analysis has been the scope of a working group within the International Committee for Coal and Organic Petrology (ICCP) since 1999, when J. Koch presented a system to qualify vitrinite particles according to their size, proximity to bright components and homogeneity of the surface. After some years of work aimed at improving the classification system using photomicrographs, it was decided to run a round robin exercise on microscopy samples. The classification system tested consists of three qualifiers ranging from excellent to low quality vitrinites with an additional option for unsuitable vitrinites. This paper reports on the results obtained by 22 analysts who were asked to measure random reflectance readings on vitrinite particles assigning to each reading a qualifier. Four samples containing different organic matter types and a variety of vitrinite occurrences have been analysed. Results indicated that the reflectance of particles classified as excellent, good or poor compared to the total average reflectance did not show trends to be systematically lower or higher for the four samples analysed. The differences in reflectance between the qualifiers for any given sample were lower than the scatter of vitrinite reflectance among participants. Overall, satisfactory results were obtained in determining the reflectance of vitrinite in the four samples analysed. This was so for samples having abundant and easy to identify vitrinites (higher plant-derived organic matter) as well as for samples with scarce and difficult to identify particles (samples with dominant marine-derived organic matter). The highest discrepancies were found for the organic-rich oil shales where the selection of the vitrinite population to measure proved to be particularly difficult. Special instructions should be provided for the analysis of this sort of samples. The certainty of identification of the vitrinite associated with the vitrinite reflectance values reported has been assessed through a reliability index which takes into account the number of readings and the coefficient of variation. The same statistical approach as that followed in the ICCP vitrinite reflectance accreditation program for single seam coals has been used for data evaluation. The results indicated low to medium dispersion for 17 out of 22 participants. This, combined with data from other sets of comparative analyses over a long period, is considered an encouraging result for the establishment of an accreditation program on vitrinite reflectance measurements in dispersed organic matter. ?? 2006 ICCP.

International Journal of Coal Geology↗

USGS2011

Resolving structural uncertainty in natural resources management using POMDP approaches

In recent years there has been a growing focus on the uncertainties of natural resources management, and the importance of accounting for uncertainty in assessing management effectiveness. This paper focuses on uncertainty in resource management in terms of discrete-state Markov decision processes (MDP) under structural uncertainty and partial observability. It describes the treatment of structural uncertainty with approaches developed for partially observable resource systems. In particular, I show how value iteration for partially observable MDPs (POMDP) can be extended to structurally uncertain MDPs. A key difference between these process classes is that structurally uncertain MDPs require the tracking of system state as well as a probability structure for the structure uncertainty, whereas with POMDPs require only a probability structure for the observation uncertainty. The added complexity of the optimization problem under structural uncertainty is compensated by reduced dimensionality in the search for optimal strategy. A solution algorithm for structurally uncertain processes is outlined for a simple example in conservation biology. By building on the conceptual framework developed for POMDPs, natural resource analysts and decision makers who confront structural uncertainties in natural resources can take advantage of the rapid growth in POMDP methods and approaches, and thereby produce better conservation strategies over a larger class of resource problems.

Ecological Modelling↗

USGS2012

Recent advances in applying decision science to managing national forests

Management of federal public forests to meet sustainability goals and multiple use regulations is an immense challenge. To succeed, we suggest use of formal decision science procedures and tools in the context of structured decision making (SDM). SDM entails four stages: problem structuring (framing the problem and defining objectives and evaluation criteria), problem analysis (defining alternatives, evaluating likely consequences, identifying key uncertainties, and analyzing tradeoffs), decision point (identifying the preferred alternative), and implementation and monitoring the preferred alternative with adaptive management feedbacks. We list a wide array of models, techniques, and tools available for each stage, and provide three case studies of their selected use in National Forest land management and project plans. Successful use of SDM involves participation by decision-makers, analysts, scientists, and stakeholders. We suggest specific areas for training and instituting SDM to foster transparency, rigor, clarity, and inclusiveness in formal decision processes regarding management of national forests.

Forest Ecology and Management↗

USGS2019

Quantitative evaluation of vitrinite reflectance in shale using Raman spectroscopy and multivariate analysis

The current research builds upon a previously published study that demonstrated the combination of Raman spectroscopy coupled with multivariate analysis (MVA) for the prediction of thermal maturity in coal by evaluating the efficacy of this method for the prediction of thermal maturity in shale. MVA techniques eliminate analyst bias in peak-fitting methods by using the full Raman spectrum, and then extricating the important spectral regions for distinguishing samples and building accurate, robust models. Partial least squares (PLS) regression models were developed using Raman spectra and VRo values (0.58–4.59%) for 53 geographically diverse shale chip samples, and 43 shale powder samples. Separate PLS models were built using Raman spectra from shale chips or powders. The calibration sets were validated using approximately one-third of the samples to rigorously assess the predictive accuracy of the models. The root mean standard error of prediction was 0.24 for the shale chip model, and 0.28 for the shale powder model. The coefficients of determination ( R 2 ) for the cross-validated data sets were identical (0.90, chips; 0.90, powders), revealing a strong linearity despite the geographic and age diversity of the samples. This study demonstrates the validity of using PLS models for the prediction of shale VRo from Raman spectra. The MVA method described herein presents a Raman alternative to the VRo industry benchmark for assessing thermal maturity in shale that is not imperiled by the shortcomings and subjectivity of peak-fitting methods.

Fuel↗

USGS2015

Standardization of reflectance measurements in dispersed organic matter: results of an exercise to improve interlaboratory agreement

Vitrinite reflectance generally is considered the most robust thermal maturity parameter available for application to hydrocarbon exploration and petroleum system evaluation. However, until 2011 there was no standardized methodology available to provide guidelines for vitrinite reflectance measurements in shale. Efforts to correct this deficiency resulted in publication of ASTM D7708: Standard test method for microscopical determination of the reflectance of vitrinite dispersed in sedimentary rocks . In 2012-2013, an interlaboratory exercise was conducted to establish precision limits for the D7708 measurement technique. Six samples, representing a wide variety of shale, were tested in duplicate by 28 analysts in 22 laboratories from 14 countries. Samples ranged from immature to overmature (0.31-1.53% R o ), from organic-lean to organic-rich (1-22 wt.% total organic carbon), and contained Type I (lacustrine), Type II (marine), and Type III (terrestrial) kerogens. Repeatability limits (maximum difference between valid repetitive results from same operator, same conditions) ranged from 0.03-0.11% absolute reflectance, whereas reproducibility limits (maximum difference between valid results obtained on same test material by different operators, different laboratories) ranged from 0.12-0.54% absolute reflectance. Repeatability and reproducibility limits degraded consistently with increasing maturity and decreasing organic content. However, samples with terrestrial kerogens (Type III) fell off this trend, showing improved levels of reproducibility due to higher vitrinite content and improved ease of identification. Operators did not consistently meet the reporting requirements of the test method, indicating that a common reporting template is required to improve data quality. The most difficult problem encountered was the petrographic distinction of solid bitumens and low-reflecting inert macerals from vitrinite when vitrinite occurred with reflectance ranges overlapping the other components. Discussion among participants suggested this problem could not be easily corrected via kerogen concentration or solvent extraction and is related to operator training and background. No statistical difference in mean reflectance was identified between participants reporting bitumen reflectance vs. vitrinite reflectance vs. a mixture of bitumen and vitrinite reflectance values, suggesting empirical conversion schemes should be treated with caution. Analysis of reproducibility limits obtained during this exercise in comparison to reproducibility limits from historical interlaboratory exercises suggests use of a common methodology (D7708) improves interlaboratory precision. Future work will investigate opportunities to improve reproducibility in high maturity, organic-lean shale varieties.

Marine and Petroleum Geology↗

USGS2021

A customized framework for regional classification of conifers using automated feature extraction

Pinyon and juniper expansion into sagebrush ecosystems is one of the major challenges facing land managers in the Great Basin. Effective pinyon and juniper treatment requires maps that accurately and precisely depict tree location and degree of woodland development so managers can target restoration efforts for early stages of pinyon and juniper expansion. However, available remotely sensed layers that cover a regional spatial extent lack the spatial resolution or accuracy to meet this need. Accuracy can be improved using object-based image analysis methods such as automated feature extraction, which has proven successful in accurately classifying land cover at the site-level but to date has yet to be applied to regional extents due to time and computational limitations. Using Feature Analyst™, we implement our framework with 1-m 2 reference imagery provided by National Agricultural Imagery Program to classify conifers across Nevada and northeastern California. Our resulting binary conifer map has an overall accuracy of 86%. We discuss the advantages to accuracy and precision our framework provides compared to other classification methods

Oregon, California, Nevada, Utah↗

USGS2009

Dynamics of national forests assessed using the Landsat record: Case studies in eastern United States

The national forests (NFs) in the United States are protected areas managed for multiple purposes, and therefore are subject to both natural and anthropogenic disturbances. Monitoring forest changes arising from such disturbances and the post-disturbance recovery processes is essential for assessing the conditions of the NFs and the effectiveness of management approaches. In this study, we used time series stacks of Landsat images (LTSS) to evaluate the dynamics of seven NFs in eastern United States, including the De Soto NF, the Talladega NF, the Francis Marion NF, and the Uwharrie NF in southeastern U.S., and the Chequamegon NF, the Hiawatha NF, and the Superior NF in northern U.S. Each LTSS consisted of 12–14 Landsat images acquired for the same location, spanning from 1984 to 2006 with a nominal interval of one image every 2 years. Each LTSS was analyzed using a vegetation change tracker (VCT) algorithm to map forest disturbance. Accuracy assessments of the derived disturbance maps revealed that they had overall accuracy values of about 80%, with most of the disturbance classes having user's accuracies ranging from 70% to 95%. The producer's accuracies were generally lower, with the majority being in the range between 50% and 70%. While this may suggest that the disturbance maps could slightly underestimate disturbances, a more detailed assessment of the omission errors revealed that the majority of the disagreements were due to minor disturbances like thinning or storm damages that were identified by the image analysts but were not captured by the VCT algorithm. The derived disturbance year maps revealed that while each of the seven NFs consisted of 90% or more forest land, significant portions of the forests were disturbed since 1984. Mapped disturbances accounted for about 30%–45% of total land area in the four NFs in southeastern U.S. and about 10%–20% in the three NFs in northern U.S. The disturbance rates were generally higher in the buffer zones surrounding each NF, and varied considerably over time. The time series approach employed in this study represents a new approach for monitoring forest resources using the Landsat or similar satellite data records. The disturbance products derived using this approach were spatially explicit and contained much more temporal details than conventional bi-temporal change products, and likely will be found more useful by many users including ecologists and resources managers. The high disturbance rates found in the southeastern U.S. suggest that this region may have a more significant role in modulating the atmospheric carbon budget than currently recognized.

Remote Sensing of Environment↗

USGS2015

A global reference database from very high resolution commercial satellite data and methodology for application to Landsat derived 30 m continuous field tree cover data

The methodology for selection, creation, and application of a global remote sensing validation dataset using high resolution commercial satellite data is presented. High resolution data are obtained for a stratified random sample of 500 primary sampling units (5 km × 5 km sample blocks), where the stratification based on Köppen climate classes is used to distribute the sample globally among biomes. The high resolution data are classified to categorical land cover maps using an analyst mediated classification workflow. Our initial application of these data is to evaluate a global 30 m Landsat-derived, continuous field tree cover product. For this application, the categorical reference classification produced at 2 m resolution is converted to percent tree cover per 30 m pixel (secondary sampling unit)for comparison to Landsat-derived estimates of tree cover. We provide example results (based on a subsample of 25 sample blocks in South America) illustrating basic analyses of agreement that can be produced from these reference data. Commercial high resolution data availability and data quality are shown to provide a viable means of validating continuous field tree cover. When completed, the reference classifications for the full sample of 500 blocks will be released for public use.

Remote Sensing of Environment↗

USGS2020

Quality control and assessment of interpreter consistency of annual land cover reference data in an operational national monitoring program

The U.S. Geological Survey Land Change Monitoring, Assessment and Projection (USGS LCMAP) initiative is working toward a comprehensive capability to characterize land cover and land cover change using dense Landsat time series data. A suite of products including annual land cover maps and annual land cover change maps will be produced using the Landsat 4-8 data record. LCMAP products will initially be created for the conterminous United States (CONUS) and then extended to include Alaska and Hawaii. A critical component of LCMAP is the collection of reference data using the TimeSync tool, a web-based interface for manually interpreting and recording land cover from Landsat data supplemented with fine resolution imagery and other ancillary data. These reference data will be used for area estimation and validation of the LCMAP annual land cover products. Nearly 12,000 LCMAP reference sample pixels have been interpreted and a simple random subsample of these pixels has been interpreted independently by a second analyst (hereafter referred to as "duplicate interpretations"). The annual land cover reference class labels for the 1984-2016 monitoring period obtained from these duplicate interpretations are used to address the following questions: 1) How consistent are the reference class labels among interpreters overall and per class? 2) Does consistency vary by geographic region? 3) Does consistency vary as interpreters gain experience over time; and 4) Does interpreter consistency change with improving availability and quality of imagery from 1984 to 2016? Overall agreement between interpreters was 88%. Class-specific agreement ranged from 46% for Disturbed to 94% for Water, with more prevalent classes (Tree Cover, Grass/Shrub and Cropland) generally having greater agreement than rare classes (Developed, Barren and Wetland). Agreement between interpreters remained approximately the same over the 12-month period during which these interpretations were completed. Increasing availability of Landsat and Google Earth fine resolution data over the 1984 to 2016 monitoring period coincided with increased interpreter consistency for the post-2000 data record. The reference data interpretation and quality assurance protocols implemented for LCMAP demonstrate the technical and practical feasibility of using the Landsat archive and intensive human interpretation to produce national, annual reference land cover data over a 30 year period. Protocols to quantify and enhance interpreter consistency are critical elements to document and ensure quality of these reference data.

Remote Sensing of Environment↗

USGS2021

Validation of the U.S. Geological Survey’s Land Change Monitoring, Assessment and Projection (LCMAP) collection 1.0 annual land cover products 1985–2017

The U.S. Geological Survey Land Change Monitoring, Assessment and Projection (USGS LCMAP) has released a suite of annual land cover and land cover change products for the conterminous United States (CONUS). The accuracy of these products was assessed using an independently collected land cover reference sample dataset produced by analysts interpreting Landsat data, high-resolution aerial photographs, and other ancillary data. The reference sample of nearly 25,000 pixels and the accompanying 33-year time series of annual land cover reference labels allowed for a comprehensive assessment of accuracy of the LCMAP land cover and land cover change products. Overall accuracy (± standard error) for the per-pixel assessment across all years for the eight land cover classes was 82.5% (±0.2%). Overall accuracy was consistent year-to-year within a range of 1.5% but varied regionally with lower accuracy in the eastern United States. User’s accuracy (UA) and producer’s accuracy (PA) for CONUS ranged from the higher accuracies of Water (UA=96%, PA=93%) and Tree Cover (UA=90%, PA=83%) to the lower accuracies of Wetland (UA=69%, PA=74%) and Barren (UA=43%, PA=57%). For a binary change / no change classification, UA of change was 13% (±0.5%) and PA was 16% (±0.6%) for CONUS when agreement was defined as a match by the exact year of change. UA and PA improved to 28% and 34% when agreement was defined as the change being detected by the map and reference data within a ±2-year window. Change accuracy was higher in the eastern United States compared to the western US. UA was 49% (±0.3) and PA was 54% (±0.3) for the footprint of change (defined as the area experiencing at least one land cover change from 1985–2017). For class-specific loss and gain when agreement was defined as an exact year match, UA and PA were generally below 30%, with Tree Cover loss being the most accurately mapped change (UA=25%, PA=31%). These accuracy results provide users with information to assess the suitability of LCMAP data and information to guide future research for improving LCMAP products, particularly focusing on the challenges of accurately mapping annual land cover change.

Remote Sensing of Environment↗

USGS2002

Statewide land cover derived from multiseasonal Landsat TM data: A retrospective of the WISCLAND project

Landsat Thematic Mapper (TM) data were the basis in production of a statewide land cover data set for Wisconsin, undertaken in partnership with U.S. Geological Survey's (USGS) Gap Analysis Program (GAP). The data set contained seven classes comparable to Anderson Level I and 24 classes comparable to Anderson Level II/III. Twelve scenes of dual-date TM data were processed with methods that included principal components analysis, stratification into spectrally consistent units, separate classification of upland, wetland, and urban areas, and a hybrid supervised/unsupervised classification called "guided clustering." The final data had overall accuracies of 94% for Anderson Level I upland classes, 77% for Level II/III upland classes, and 84% for Level II/III wetland classes. Classification accuracies for deciduous and coniferous forest were 95% and 93%, respectively, and forest species' overall accuracies ranged from 70% to 84%. Limited availability of acceptable imagery necessitated use of an early May date in a majority of scene pairs, perhaps contributing to lower accuracy for upland deciduous forest species. The mixed deciduous/coniferous forest class had the lowest accuracy, most likely due to distinctly classifying a purely mixed class. Mixed forest signatures containing oak were often confused with pure oak. Guided clustering was seen as an efficient classification method, especially at the tree species level, although its success relied in part on image dates, accurate ground troth, and some analyst intervention. ?? 2002 Elsevier Science Inc. All rights reserved.

Remote Sensing of Environment↗

USGS1997

An interactive program for computer-aided map design, display, and query: EMAPKGS2

EMAPKGS2 is a user-friendly, PC-based electronic mapping tool for use in hydrogeologic exploration and appraisal. EMAPKGS2 allows the analyst to construct maps interactively from data stored in a relational database, perform point-oriented spatial queries such as locating all wells within a specified radius, perform geographic overlays, and export the data to other programs for further analysis. EMAPKGS2 runs under Microsoft?? Windows??? 3.1 and compatible operating systems. EMAPKGS2 is a public domain program available from the Kansas Geological Survey. EMAPKGS2 is the centerpiece of WHEAT, the Windows-based Hydrogeologic Exploration and Appraisal Toolkit, a suite of user-friendly Microsoft?? Windows??? programs for natural resource exploration and management. The principal goals in development of WHEAT have been ease of use, hardware independence, low cost, and end-user extensibility. WHEAT'S native data format is a Microsoft?? Access?? database. WHEAT stores a feature's geographic coordinates as attributes so they can be accessed easily by the user. The WHEAT programs are designed to be used in conjunction with other Microsoft?? Windows??? software to allow the natural resource scientist to perform work easily and effectively. WHEAT and EMAPKGS have been used at several of Kansas' Groundwater Management Districts and the Kansas Geological Survey on groundwater management operations, groundwater modeling projects, and geologic exploration projects. ?? 1997 Elsevier Science Ltd.

Computers & Geosciences↗