Search USGS⌕ Search

SEARCH · Search USGS

Results for “Ring”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
USGS2011

Wave exposure of Corte Madera Marsh, Marin County, California: A field investigation

Tidal wetlands provide valuable habitat, are an important source of primary productivity, and can help to protect the shoreline from erosion by attenuating approaching waves. These functions are threatened by the loss of tidal marshes, whether due to erosion, sea-level rise, or land-use practices. Erosion protection by wetlands is expected to vary geographically, because wave attenuation in marshes depends on vegetation type, density, and height and wave attenuation over mudflats depends on slope and sediment properties. In macrotidal northern European marshes, a 50 percent reduction in wave height within tens of meters of vegetated salt marsh has been observed. This study was designed to evaluate the role of mudflats and marshes in attenuating waves at a site in San Francisco Bay. In prehistoric times, the shoreline of San Francisco Bay was ringed with tidal wetlands, with mudflats at lower elevations and marshes above. Most of the marshes around the Bay emerged 2,000–4,000 years ago, after the rate of sea-level rise slowed to approximately 1 mm/year. Approximately 80 percent of the acreage of tidal marsh and 40 percent of the acreage of tidal mudflats in San Francisco Bay have been lost to filling and draining since 1800. Tidal wetlands are particularly susceptible to impacts from sea-level rise because the vegetation at each elevation is adapted to a specific tidal-inundation regime. The maintenance of suitable marsh-plain elevations depends on a supply of sediment that can keep up with the rate of sea-level rise. Sea-level rise, which according to recent projections may reach 75 to 190 cm by the year 2100, poses a significant threat to wetlands in San Francisco Bay, where landward migration is frequently impossible due to urbanization of the adjacent landscape. In this study, we collected data in Corte Madera Bay and Marsh to determine whether, and to what degree, waves are attenuated as they transit the Bay and, during high tides, the marsh. Corte Madera Bay was selected as a study site because of its exposure to wind waves, as well as its history of shoreline erosion and marsh restoration and monitoring. Data were collected in the winter of 2010, along a cross-shore transect extending from offshore of the subtidal mudflats into the tidal marsh. This study forms part of the Innovative Wetland Adaptation in the Lower Corte Madera Creek Watershed Project initiated by the Bay Conservation and Development Commission (BCDC) ( http://www.bcdc.ca.gov/planning/climate_change/WetlandAdapt.shtml ).

California↗
USGS2011

Summary of November 2010 meeting to evaluate turbidite data for constraining the recurrence parameters of great Cascadia earthquakes for the update of national seismic hazard maps

This report summarizes a meeting of geologists, marine sedimentologists, geophysicists, and seismologists that was held on November 18–19, 2010 at Oregon State University in Corvallis, Oregon. The overall goal of the meeting was to evaluate observations of turbidite deposits to provide constraints on the recurrence time and rupture extent of great Cascadia subduction zone (CSZ) earthquakes for the next update of the U.S. national seismic hazard maps (NSHM). The meeting was convened at Oregon State University because this is the major center for collecting and evaluating turbidite evidence of great Cascadia earthquakes by Chris Goldfinger and his colleagues. We especially wanted the participants to see some of the numerous deep sea cores this group has collected that contain the turbidite deposits. Great earthquakes on the CSZ pose a major tsunami, ground-shaking, and ground-failure hazard to the Pacific Northwest. Figure 1 shows a map of the Pacific Northwest with a model for the rupture zone of a moment magnitude M w 9.0 earthquake on the CSZ and the ground shaking intensity (in ShakeMap format) expected from such an earthquake, based on empirical ground-motion prediction equations. The damaging effects of such an earthquake would occur over a wide swath of the Pacific Northwest and an accompanying tsunami would likely cause devastation along the Pacifc Northwest coast and possibly cause damage and loss of life in other areas of the Pacific. A magnitude 8 earthquake on the CSZ would cause damaging ground shaking and ground failure over a substantial area and could also generate a destructive tsunami. The recent tragic occurrence of the 2011 M w 9.0 Tohoku-Oki, Japan, earthquake highlights the importance of having accurate estimates of the recurrence times and magnitudes of great earthquakes on subduction zones. For the U.S. national seismic hazard maps, estimating the hazard from the Cascadia subduction zone has been based on coastal paleoseismic evidence of great earthquakes over the past 5,000 years. The instrumental catalog of earthquakes is of little use for constraining the hazard of the CSZ, because there are virtually no recorded earthquakes on most of the plate interface of the CSZ. There are no historical accounts in the past 150 years of large earthquakes on most of the CSZ. Until about 20 years ago, some interpreted this lack of recent and historical earthquakes as an indicator that the subduction zone was slipping aseismically and could not produce a great earthquake. The work of Brian Atwater and others, in the late 1980s and the 1990s (Atwater, 1987, 1992; Atwater and others, 1995; Nelson and others, 1996; Clague, 1997; Atwater and Hemphill-Haley, 1997; Atwater and others, 2004) demonstrated that submerged forests, buried soils, tsunami deposits, and liquefaction along and near the coast were compelling evidence of repeated great Cascadia earthquakes over at least the past 5,000 years. Atwater and Hemphill-Haley (1997) concluded from paleoseismic evidence at Willapa Bay, Washington, that great earthquakes ruptured the CSZ with an average recurrence time of about 500 years. The date of the last great CSZ earthquake, January 26, 1700, was established from historical records of the so-called orphan tsunami in Japan that is inferred to have been produced by this earthquake (Satake and others, 1996, 2003; Atwater and others, 2005) and is consistent with tree-ring data from drowned forests in Washington and Oregon. From modeling the observations of the tsunami, Satake and others (2003) estimated a moment magnitude of about 9.0 for this earthquake. Many other paleoseismic sites have been investigated along the Pacific Northwest coast from Vancouver Island to northern California and show evidence of great CSZ earthquakes. Nelson and others (2006) summarized the dates found from these studies and proposed correlations between sites indicating the extent of rupture for individual events. Dating of inferred tsunami deposits in Bradley Lake, Oregon by Kelsey and others (2005), as well as tsunami and subsidence evidence from Six Rivers, Oregon (Kelsey and others, 2002) and Coquille River (Witter and others, 2003), indicates that there were probably M w 8 ruptures in the southern portion of the CSZ in addition to the M w 9 events that rupture the whole length of the CSZ (Nelson and others, 2006). A parallel development over the past 20 years or more is the use of deep-sea turbidite deposits for identifying and dating great Cascadia earthquakes over the past 10,000 years (Adams, 1990; Goldfinger and others, 2003, 2008, in press; Goldfinger, 2011). Turbidites are sediment deposits in the deep ocean from turbidity currents, which are energetic flows of sediment and water along the continental shelf and slope. Adams (1990), using the counts of turbidites in deep-sea cores off the coast of Oregon and Washington collected and analyzed by Griggs (1969) and Griggs and others (1969), proposed that these turbidites were caused by the shaking of great Cascadia earthquakes. Part of his reasoning was that the number (13) of turbidite deposits that occurred since deposition of the Mazama Ash 7,000 years ago gave a recurrence time of about 500 years, consistent with that derived from the coastal submergence data. Adams (1990) also proposed the “confluence test” which evaluates the number of turbidites for submarine channels that form a confluence. He reported that the number of turbidites in the single downstream channel equaled the number in each of the tributary channels. He reasoned that this indicated that the turbidites in each tributary were simultaneously triggered and were, therefore, caused by a common forcing agent. He concluded that shaking from extended ruptures of great Cascadia earthquakes was the most likely cause of these turbidites. Based on the paleoseismic evidence of past great earthquakes, the hazard from the Cascadia subduction zone was included in the 1996 U.S. NSHM (Frankel and others, 1996), which were the basis for seismic provisions in the 2000 International Building Code. These hazard maps used the paleoseismic studies to constrain the recurrence rate of great CSZ earthquakes. Goldfinger and his colleagues have since collected many more deep ocean cores and done extensive analysis on the turbidite deposits that they identified in the cores (Goldfinger and others, 2003, 2008, in press; Goldfinger, 2011). Using their dating of the sediments and correlation of features in the logs of density and magnetic susceptibility between cores, they developed a detailed chronology of great earthquakes along the CSZ for the past 10,000 years (Goldfinger and others, in press). These correlations consist of attempting to match the peaks and valleys in logs of density and magnetic susceptibility between cores separated, in some cases, by hundreds of kilometers. Based on this work, Goldfinger and others (2003, 2008, in press) proposed that the turbidite evidence indicated the occurrence of great earthquakes (M w 8) that only ruptured the southern portion of the CSZ, as well as earthquakes with about M w 9 that ruptured the entire length of the CSZ. For the southernmost portion of the CSZ, Goldfinger and others (in press) proposed a recurrence time of M w 8 or larger earthquakes of about 230 years. This proposed recurrence time was shorter than the 500 year time that was incorporated in one scenario in the NSHM’s. It is important to note that the hazard maps of 1996 and later also included a scenario or set of scenarios with a shorter recurrence time for M w 8 earthquakes, using rupture zones that are distributed along the length of the CSZ (Frankel and others, 1996; Petersen and others, 2008). Originally, this scenario was meant to correspond to the idea that some of the 500-year averaged ruptures seen in the paleoseismic evidence could have been a series of M w 8 earthquakes that occurred over a short period of time (a few decades), rather than M w 9 earthquakes. Figure 2 shows the logic tree for the CSZ used in the 2008 NSHM’s (Petersen and others, 2008). This logic tree includes whole CSZ rupture earthquakes (M w 8.8–9.2) and partial CSZ rupture earthquakes (M w 8.0–8.7). In this latest version of the NSHM’s, the effective recurrence time of earthquakes on the CSZ with moment magnitudes greater than or equal to 8.0 over the various models is about 270 years (Petersen and others, 2008). This recurrence time applies to the entire CSZ, so that the hazard from great earthquakes was approximately equal along the whole zone, although the hazard estimates taper on the northern and southern ends of the CSZ, because of the way rupture zones of M w 8 earthquakes were distributed along the strike of the CSZ. The NSHM will be updated in 2013, as part of the standard update cycle that corresponds to the update cycle of the national model building codes that are based on the seismic hazard maps. A meeting was necessary to assemble a wide group of experts to hear Dr. Goldfinger explain his methodology for dating and correlating the turbidites and for developing the earthquake chronology. The overall goal of the workshop was to evaluate observations of turbidite deposits to provide constraints on the recurrence times and rupture extents of great Cascadia subduction zone earthquakes for the next update of the NSHM. Before the meeting, participants were supplied with the U.S. Geological Survey (USGS) Professional Paper of Goldfinger and others (in press), as well as material from Brian Atwater and Alan Nelson. The agenda of the meeting was developed by Art Frankel, with assistance from Chris Goldfinger, Brian Atwater, Alan Nelson, Mark Petersen, and Craig Weaver. The meeting was hosted by Chris Goldfinger of Oregon State University. We stress that it is difficult to evaluate in a two-day meeting the large amount of work that Goldfinger and his colleagues have done over the past 15 years or more. This meeting is the first step in a process that develops the inputs to the update of the national maps. The conclusions of this workshop will be discussed and possibly modified at the regional Pacific Northwest workshop for the hazard maps to be held in early 2012. Vetting new research results using informed expert opinion is an integral part of updating the national maps and does not reflect on the veracity of these results.

Cascadia↗
USGS2015

Archiving California’s historical duck nesting data

The U.S. Geological Survey (USGS), in partnership with the California Waterfowl Association (CWA) and other organizations, have compiled large datasets on the nesting ecology and management of dabbling ducks and associated upland nesting birds (Northern Harriers [ Circus cyaneus ], Short-eared Owls [ Asio flammeus ], Ring-necked Pheasants [ Phasianus colchicus ], and American Bitterns [ Botaurus lentiginosus ]) throughout California on Federal Refuges, State Wildlife Areas, and private lands, some participating in State and Federal habitat programs. These datasets encompass several long-term monitoring programs at multiple sites throughout California, and include data from more than 26,000 nests and span nearly 30 years. These historical datasets represent some of the longest term datasets on nesting ducks in North America, if not the world. They are extremely valuable for ongoing waterfowl management and habitat conservation efforts in California, as well as throughout the world. However, without organization and electronic access, these data are an untapped resource and are not being used to the full extent possible. Prior to this project, these datasets were scattered among various agencies and organizations, and original paper nest cards were being stored in cardboard boxes in attics and storage containers that were not suitable for long-term archival storage. In addition, most of these data had not been entered into a computerized database and thus were at high risk for permanent data loss. To protect this irreplaceable dataset, we submitted a series of proposals to obtain funds to complete this data archival project over the past 5 years. The Central Valley Joint Venture, USGS Data Rescue Program, and USGS Ecosystems Mission Area funded this data archival project. In addition, we leveraged other USGS projects on nesting shorebirds, songbirds, and seabirds to use further resources to more fully develop the nest database structure for use on nesting waterfowl. Specifically, this large dataset on ducks was archived by USGS, but the dataset is owned and managed by a consortium of organizations. Therefore, any access and use of this data must occur through the principal investigators, who contributed data and resources to this archival project, as detailed in section, “Data Availability.” With the conclusion of this project, most duck nest data have been entered, but all nest-captured hen data and other breeding waterfowl data that were outside the scope of this project have still not been entered and electronically archived. Maintaining an up-to-date archive will require additional resources to archive and enter the new duck nest data each year in an iterative process. Further, data proofing should be conducted whenever possible, and also should be considered an iterative process as there was sometimes missing data that could not be filled in without more direct knowledge of specific projects. Despite these disclaimers, this duck data archive represents a massive and useful dataset to inform future research and management questions.

California↗
USGS2019

Evaluating legacy effects of hyperabundant white-tailed deer (Odocoileus virginianus) in forested stands of Harriman and Bear Mountain State Parks, New York

Executive Summary White-tailed deer (Odocoileus virginianus) are among the most impactful herbivores in the eastern United States. Legacy forest effects, those accrued from intense herbivory over time, manifest as low seedling regeneration, high cover of plant species that are infrequently browsed by deer, presence or expansion of nonnative or invasive plant species, few herbaceous species, and diminished capacity for recovery. Interfering vegetation (that is, species that increase in cover and density due to avoidance by deer, such as American beech sprouts, Pennsylvania sedge, and hay-scented fern) increase competition for light and hinder recruitment of trees into the forest canopy. The lower Hudson Valley in New York has been heavily browsed by white-tailed deer since the early 20th century. The region has some of the lowest tree regeneration rates in New York State as a result of deer browsing and subsequent increases in interfering vegetation. The U.S. Geological Survey and the State University of New York College of Environmental Science and Forestry studied sites where deer hunting is permitted (case sites) and nearby sites where hunting is currently prohibited (control sites) to assess and identify forest structure and composition differences. Instead of using deer exclosures, which are time-consuming and expensive to install and maintain, we used a case-control study because such studies are well-suited to effects with long latency and rare outcomes. Case-control studies seek to describe the relation between an outcome of interest (in this study, forest understory recovery from chronic herbivory) and forest condition. We inferred recovery by comparing these characteristics on adjacent sites in the lower Hudson Valley with similar forest communities and land uses but different deer population management histories. Case plots were on lands where deer management has taken place annually for several decades. Control plots were on lands where deer populations have not been consistently managed to lowered abundance. We accounted for differences in forest recovery not attributable to deer by first matching case and control plots along several important environmental gradients (slope, aspect, elevation, moisture, canopy openness). By controlling for these gradients, we looked for associations between measured forest conditions and deer herbivory reduction through population management. We surveyed more than 200 plots in upland forest types across case and control sites where we assessed forest condition by estimating density (number per unit area) and composition and cover (percent) of important vegetation constituents in ground, shrub, subcanopy, and canopy layers of the forest. We recorded 37 tree species, 22 shrub species, 57 herbaceous species, and 19 species of grasses and sedges in our plot surveys, including a number of nonnative and invasive plants. We also estimated the ages of a number of common canopy trees by counting rings from cores extracted from individual stems. Effects of more than 100 years of chronic deer browsing manifested in low herbaceous ground cover and little to no tree recruitment (saplings) on lands without deer management. In contrast, sustained deer management resulted in forests with conditions that indicated substantial recovery from chronic herbivory in the ground, shrub, and subcanopy layers. Sites with ongoing deer management exhibited greater ground cover of tree seedlings and herbs and less ground cover of interfering vegetation and nonnative species. The well-developed sub-canopy layer of small trees, saplings, and tall shrubs on sites with deer management indicates a high potential for sapling recruitment to the canopy of the future forest. Of the 25 subcanopy trees sampled on control sites, most were more than 100 years old, indicating little to no regeneration in areas sampled for more than 100 years. The forest canopy, a relic of land uses of bygone days, requires a source of young trees to replace itself as older trees die. Without an abundant layer of young trees in the subcanopy, a forest cannot be sustained over time. Reduction in deer herbivory promotes forest recovery and could benefit Harriman and Bear Mountain State Parks (the control sites for the study), but removal of interfering vegetation may be necessary to mitigate legacy effects where they currently hinder ground layer recovery. To successfully promote a more desirable forest condition that includes elimination of nonnative plant species, promotion of tree recruitment into the forest canopy, and development of diverse and abundant herbaceous cover in ground layer vegetation, future management decisions could include information on herbivory reduction and management of interfering vegetation where necessary.

New York↗
USGS1974

Long term flow of the Truckee River in California and Nevada

The Office of the Solicitor, Department of the Interior, requested the Geological Survey to evaluate the reliability of streamflow records in the Truckee River basin and to determine the long-term average annual runoff. The reliability of streamflow records was evaluated by comparisons between pairs of records at six locations along the Truckee River between Lake Tahoe and Pyramid Lake. The observed or estimated annual runoff near Nixon, Nevada was adjusted for changes in storage, evaporation losses, diversions, and depletions to approximate the inflow into Pyramid Lake under natural conditions. The long-term average annual runoff near Nixon was computed on the basis of streamflow records since 1899. The long-term (124-year) record of precipitation at Sacramento and tree ring information were used to substantiate the conclusion that the average runoff during the 74 years of streamflow record is a reliable measure of the average runoff for a longer period.

California, Nevada↗
USGS1979

Preliminary report on Tertiary volcanism and uranium mineralization in the Thomas Range and northern Drum Mountains, Juab County, Utah

The Thomas Range and northern Drum Mountains have a history of volcanism, faulting, and mineralization that began about 42 m.y. ago. Volcanic activity and mineralization in the area can be divided into three stages according to the time-related occurrence of rock types, trace element associations, and chemical nature of mineralization. Volcanic activity switched abruptly from rhyodacite-quartz latite (42-39 m.y. ago) to rhyolite (38-32 m.y. ago) to alkali rhyolite stages (21 and 6-7 m.y. ago); these stages correspond to periods of chalcophile and siderophile metal mineralization, no mineralization, and lithophile metal mineralization, respectively. Angular unconformities record episodes of cauldron collapse and block faulting between the stages of volcanic activity and mineralization. The youngest angular unconformity formed between 21 and 7 m.y. ago during basin-and-range faulting. Early rhyodacite-quartz latite volcanism from composite volcanoes and fissures produced flows, breccias, and ash-flow tuff of the Drum Mountains Rhyodacite and Mt. Laird Tuff. Eruption of the Mt. Laird Tuff about 39 m.y. ago from an area north of Joy townsite was accompanied by collapse of the Thomas caldera. Part of the roof of the magma chamber did not collapse, or the magma was resurgent, as is indicated by porphyry dikes and plugs in the Drum Mountains. Chalcophile and siderophile metal mineralization, including copper, gold, and manganese, accompanied early volcanism. The middle stage of volcanic activity was characterized by explosive eruption of rhyolitic ash-flow tuffs and collapse of the Dugway Valley cauldron. Eruption of the Joy Tuff 38 m.y. ago was accompanied by subsidence of this cauldron and followed by collapse and sliding of Paleozoic rocks from the west wall of the cauldron. Landslides in The Dell were covered by the Dell Tuff, erupted 32 m.y. ago from an unknown source to the east. An ash-flow of the Needles Range Formation was erupted 30-31 m.y. ago, probably from a distant source outside the volcanic field. The rhyolitic stage of volcanism was barren of mineralization. The last stage of volcanism was contemporaneous with basin-and-range faulting and was characterized by explosive eruption of ash and pumice, forming stratified tuff, and by quiet eruption of alkali rhyolite as viscous flows and domes. The first episode of alkali rhyolite volcanism deposited the beryllium tuff and porphyritic rhyolite members of the Spor Mountain Formation 21 m.y. ago. After a period of block faulting, the stratified tuff and alkali rhyolite of the Topaz Mountain Rhyolite were erupted 6-7 m.y. ago along faults and fault intersections. Erosion of Spor Mountain may have provided abundant dolomite detritus to the beryllium tuff member. The alkali rhyolite of both formations is fluorine-rich, as is evident from abundant topaz, and contains anomalous amounts of lithophile metals. Alkali rhyolite volcanism was accompanied by lithophile metal mineralization which deposited fluorite, beryllium, and uranium. The structure of the area is dominated by the Thomas caldera, and the younger Dugway Valley cauldron, which is nested within the Thomas caldera; the Thomas caldera is surrounded by a rim of Paleozoic rocks at Spor Mountain and Paleozoic to Precambrian rocks in the Drum Mountains. The Joy fault and Dell fault system mark the ring fracture zone of the Thomas caldera. These structural features began to form about 39 m.y. ago during eruption of the Mt. Laird Tuff and cauldon subsidence. The Dugway Valley cauldron sank along a series of step-like normal faults southeast of Topaz Mountain in response to collapse of the magma chamber of the Joy Tuff. The caldera structure was modified by block faulting between 21 and 7 m.y. ago, the time of widespread extensional faulting in the basin-and-range province. Vents erupted alkali rhyolite 6-7 m.y. ago along basin-and-range faults. Uranium mineralization was associated with the stage of alkali rhyolite volcanism, extensional basin-and-range faulting, and lithophile metal mineralization; it occurred at least 11 m.y. after the end of the caldera cycle. Uranium, derived from alkali rhyolite magma, was concentrated in trace amounts by magmatic fluids and in potentially economic amounts by hydrothermal fluids and ground water. Hydrothermal fluids deposited uraniferous fluorite as pipes in carbonate rocks of Paleozoic age on Spor Mountain and uranium-bearing disseminated deposits of fluorite and beryllium in the beryllium tuff member of the Spor Mountain Formation. Uranium of hydrothermal origin is dispersed in fluorite and opal. Uranium in fluorite may be tetravalent(?) but that in opal is probably hexavalent; no primary minerals of tetravalent uranium are known to occur. Ground waters have concentrated significant ores of hexavalent uranium minerals in the beryllium tuff member of the Spor Mountain Formation at the Yellow Chief Mine, and are probably also responsible for widespread low concentrations (0.0X percent) of uranium that occur separately from beryllium ore in the beryllium tuff member. More deposits of the Yellow Chief type may occur in down-faulted sections of beryllium tuff beneath the Thomas Range. The ground water ores show no evidence of a reducing environment; instead, precipitation of hexavalent uranium minerals occurred by evaporation, decline in concentration of complexing ions such as carbonate, or some other mechanism. Reducing environments for hydrothermal deposits must be sought around rhyolite vents and in a hypothesized pluton of alkali rhyolite composition beneath Spor Mountain; for ground-water deposits, reducing environments may occur in basin fill such as that of the Dugway Valley cauldron.

Utah↗
USGS1979

Titaniferous magnetite in the layered intrusive complex at Lakathah, Kingdom of Saudi Arabia

The Lakathah layered intrusive complex about 90 km east of Qunfudhah contains significant resources of low-grade titanium-bearing rock. The complex is about 10 km in diameter and consists of three principal units: an outer syenite ring, an intermediate diorite-gabbro zone, and a central pyroxenite-hornblendite core. The principal mineralization zone is in the ultramafic core of the complex. The titanium is mainly in titaniferous magnetite, but some is in ilmenite intergrown with magnetite and in the titanium-bearing hornblende, kaersutite. The titaniferous magnetite is in concordant lenses and veinlets and is disseminated throughout the host rock. The lenses and veins range from a few centimeters to 3 m in width and are as much as 50 m long. The layered disseminated bodies contain as much as 25 percent magnetite. Exploratory drilling showed that an area 500 by 1000 m contains titaniferous rock averaging about 6.2 percent TiO2. This mineralized zone contains about 175,000,000 tons per 100 m depth. Material of this grade is not commercial at this time, but may be a future resource. Alluvial deposits along the Red Sea near Al Qunfudhah should be tested for possible deposits of titaniferous sand.

Open-File Report↗
USGS1979

Geology, geochronology, and potential volcanic hazards in the Lava Ridge-Hells Half Acre area, eastern Snake River Plain, Idaho

The evaluation of volcanic hazards for the proposed Safety Test Reactor Facility (STF) at the Argonne National Laboratory-West (ANLW) site, Idaho National Engineering Laboratory (INEL), Idaho, involves an analysis of the geology of the Lava Ridge-Hells Half Acre area and of K-At age determinations on lava flows in cored drill holes. The ANLW site at INEL lies in a shallow topographic depression bounded on the east and south by volcanic rift zones that are the locus of past shield-type basalt volcanism and by rhyolite domes erupted along the ring fracture of an inferred rhyolite caldera. The K-At age data indicate that the ANLW site has been flooded by basalt lava flows at irregular intervals from perhaps a few thousand years to as much as 300,000-400,000 years, with an average recurrence interval between flows of approximately 80,000-100,000 years. At least five major lava flows have covered the ANLW site within the past 500,000 years.

Idaho↗
USGS1983

Geophysical and geologic studies in southern Mecklenburg County and vicinity, North Carolina and South Carolina

Geophysical methods consisting of gravity, aeromagnetics and aeroradioactivity have been applied to part of the Charlotte and Carolina slate belts in southern Mecklenburg County and vicinity to help interpret geology, lithology and structure. High aeroradioactivity is associated with potassium-rich granitic plutons, muscovite-rich gneisses, schists, and metavolcanic rocks; positive gravity and magnetic anomalies are associated with gabbro plutons; and negative gravity anomalies are associated with granitic plutons. At the west side of the slate belt, the Tillery phyllite is interpreted as having undergone progressive metamorphism. The underlying Uwharrie Formation extends into the Charlotte belt where it is mapped as metavolcanic rocks. Gravity models of the Carolina slate belt indicate that it is a synform containing a wedge of metasedimentary and volcanoclastic rock on plutonic basement. The basement is exposed in the adjacent Charlotte belt antiform. The northern Charlotte belt contains mainly plutonic rocks which have been divided into 3 supergroups of plutons based upon chemistry, mineralogy, texture, and age. They are: 1. Old Plutonic supergroup - plutons 545-490 m.y. that are medium to coarse-grained tonalite, quartz diorite, and granodiorites. 2. Concord-Salisbury supergroup -- plutons 426-350 m.y. which form sheet-like intrusions of differentiated gabbro; local volcanic centers with ring complexes 13 km in diameter that suggest magma chambers 0 - 8 km deep; smaller bodies of diorite, monzonite, and syenite; and small Salisbury type granodiorites. 3. Landis supergroup -- plutons 350-280 m.y. that are usually very coarse-grained, porphyritic, 'big feldspar,' potassium-rich granites. The Mecklenburg-Weddington gabbro complex of the Concord-Salisbury supergroup, the largest feature in the study area, contains three large gabbro plutons. The gabbro intruded old Plutonic complex rocks and could-have produced the metamorphic reaction K-feldspar + sillimanite quartz + muscovite reflected in the mineral assemblage of adjacent felsic metavolcanic rocks. Gravity models indicate a lopolith 3.5- to 4.5-km thick with a 2 km sill extending to the northeast. Positive magnetic and gravity anomalies suggest the lopolith is. connected with the Concord gabbro complex to the northeast. The sheet-like intrusions of Concord-Salisbury group gabbros, forming the core of the composite 5atholith, have medium-grained Salisbury type granodiorite above, and coarser-grained Landis granite below. The position of the supergroups as presently exposed may be a function of level of erosion versus level of emplacement. The plutons in the composite batholith span 200 m.y. according to current age data and are arranged with the oldest at the top and the youngest at the bottom. However, Rb-Sr and K-At ages in the Piedmont are more likely to reflect age of crustal uplift than the age of metamorphism or intrusion. The Charlotte belt composite batholith, therefore, may very well be the result of a shorter single tectonic event or process.

North Carolina, South Carolina↗
USGS1984

An evaluation of the applicability of the telluric-electric and audio-magnetotelluric methods to mineral assessment on the Arabian Shield, Kingdom of Saudi Arabia

Feasibility studies of two electromagnetic methods were made in selected areas of the Jabal Hibshi (1:250,000) quadrangle, 26F, in the Kingdom of Saudi Arabia in March of 1983. The methods tested were the natural source-field telluricelectric and audio-magnetotelluric methods developed and extensively used in recent years by the U.S. Geological Survey in some of its domestic programs related to geothermal and mineral resource assessment. Results from limited studies in the Meshaheed district, the Jabal as Silsilah ring complex, and across a portion of the Raha fault zone clearly demonstrate the appropriateness of these sub-regional scale, reconnaissance-type studies to mineral resource assessment. The favorable results obtained are largely attributed to distinctive and large contrasts in the electrical resistivity of the major rock types encountered. It appears that the predominant controlling factor governing the rock resistivities is the amount of contained clay minerals. Accordingly, unaltered (specifically, non-argillic) igneous and metamorphic rocks have very high resistivities; metasedimentary rocks of the Murdama group that contain several percent clay minerals have intermediate values of resistivity; and highly altered rocks, containing abundant clay minerals, have very low values of resistivity. Water-filled fracture porosity may be a secondary, but important, factor in some settings. However, influences from variations in interstitial or intercrystalline, water-filled porosity are probably small because these types of porosity are generally low. It is reasonable to expect similar results in other areas within the Arabian Shield.

Open-File Report↗
USGS1998

Geology and mineral resources of the Lake Valley area, Sierra County, New Mexico

At the request of the Bureau of Land Management, the U.S. Geological Survey assessed the Lake Valley Area of Critical Environmental Concern (ACEC), which includes the historic Lake Valley townsite and silver-manganese mining district, for undiscovered mineral resources. The Lake Valley ACEC is along the southeastern margin of the Black Range of western Sierra County, New Mexico. The Black Range contains eleven mining districts from which silver, lead, zinc, manganese, copper, gold, and tin have been recovered. As part of the study, an area of over 75 square mi (195 square km) in the area of the Lake Valley ACEC was mapped to understand ore controls and to assess mineral-resource potential. Lake Valley mining district is in Mississippian Lake Valley Formation carbonate rocks, but much of the surrounding terrane consists of volcanic rocks on the southeastern edge of the Emory cauldron which formed about 34.9 Ma. Volcanic rocks are part of the Mogollon-Datil volcanic province which include flows, breccias, ash-flow tuffs, and intrusive rhyolites. The Lake Valley mining district is located about 20 mi (32 km) south of the Late Cretaceous Laramide copper-gold porphyry intrusion at Hillsboro. It is also located at the western boundary of the Rio Grande rift basin.The Lake Valey fault is the major structural feature of the study area. Geological and geophysical data suggest the fault is composed of two segments: a southern, northwest-striking segment that may have a pre-Tertiary history and a northerly-striking segment that is part of the Emory cauldron ring fracture. The mining district is bounded by the southern, northwest-striking segment of the fault which may have up to 800 ft (240m) of normal offset. Deposit types identified in the Black Range, and for which we assess mineral potential, are Laramide porphyry, Laramide skarns, Laramide veins, gold placer, carbonate-hosted, volcanic-epithermal, and rhyolite tin; no Rio Grande Rift baritefluorite-galena deposits are known, but they are included in the assessment. The most likely deposits to be discovered in the Lake Valley district are carbonate-hosted silver-manganese deposits. These deposits could be deposited by hydrothermal fluids or be related to intrusion of Oligocene rhyolite or Laramide porphyry. An aeromagnetic high south of the district probably reflects a small felsic intrusion of unknown age. We assess the Lake Valley ACEC as having low to moderate potential for undiscovered carbonate-hosted deposits associated with volcanic rocks or Laramide porphyry plutons, and low potential for gold placer and rhyolite tin deposits.

New Mexico↗
USGS2001

Stratigraphic section and selected semiquantitative chemistry, Meade Peak phosphatic shale member of Permian Phosphoria Formation, central part of Rasmussen Ridge, Caribou County, Idaho

The U.S. Geological Survey (USGS) has studied the Permian Phosphoria Formation in southeastern Idaho and the entire Western U.S. Phosphate Field throughout much of the twentieth century. In response to a request by the U.S. Bureau of Land Management, a new series of resource, geological, and geoenvironmental studies was undertaken by the USGS in 1998. To accomplish these studies, the USGS has formed cooperative research relationships with two Federal agencies, the Bureau of Land Management and the U.S. Forest Service, tasked with land management and resource conservation on public lands; and with five private companies currently leasing or developing phosphate resources in southeastern Idaho. The companies are Agrium U.S. Inc. (Rasmussen Ridge mine) , Astaris LLC (Dry Valley mine), Rhodia Inc. (Wooley Valley mine, inactive), J.R. Simplot Company (Smoky Canyon mine), and Monsanto Co. (Enoch Valley mine). Some of the mineralogical research associated with this project is supported through a cooperative agreement with the Department of Geology and Geological Enginee ring, University of Idaho. Present studies consist of integrated, multidisciplinary research directed toward (1) resource and reserve estimations of phosphate in selected 7.5-minute quadrangles; (2) elemental residence, mineralogical and petrochemical characteristics; (3) mobilization and reaction pathways, transport, and fate of potentially toxic elements associated with the occurrence, development, and societal use of phosphate; (4) geophysical signatures; and (5) improving the understanding of deposit origin. Because raw data acquired during the project will require time to interpret, the data are released in open-file reports for prompt availability to other workers. Open-file reports associated with this series of studies are submitted to each of the Federal and industry cooperators for comment; however, the USGS is solely responsible for the data contained in the reports.

Idaho↗
USGS1999

Gravity and magnetic study of the Pahute Mesa and Oasis Valley region, Nye County, Nevada

Regional gravity and aeromagnetic maps reveal the existence of deep basins underlying much of the southwestern Nevada volcanic field, approximately 150 km northwest of Las Vegas. These maps also indicate the presence of prominent features (geophysical lineaments) within and beneath the basin fill. Detailed gravity surveys were conducted in order to characterize the nature of the basin boundaries, delineate additional subsurface features, and evaluate their possible influence on the movement of ground-water. Geophysical modeling of gravity and aeromagnetic data indicates that many of the features may be related to processes of caldera formation. Collapse of the various calderas within the volcanic field resulted in dense basement rocks occurring at greater depths within caldera boundaries. Modeling indicates that collapse occurred along faults that are arcuate and steeply dipping. There are indications that the basement in the western Pahute Mesa - Oasis Valley region consists predominantly of granitic and/or fine-grained siliceous sedimentary rocks that may be less permeable to groundwater flow than the predominantly fractured carbonate rock basement to the east and southeast of the study area. The northeast-trending Thirsty Canyon lineament, expressed on gravity and basin thickness maps, separates dense volcanic rocks on the northwest from less dense intracaldera accumulations in the Silent Canyon and Timber Mountain caldera complexes. The source of the lineament is an approximately 2-km wide ring fracture system with step-like differential displacements, perhaps localized on a pre-existing northeast-trending Basin and Range fault. Due to vertical offsets, the Thirsty Canyon fault zone probably juxtaposes rock types of different permeability and, thus, it may act as a barrier to ground-water flow and deflect flow from Pahute Mesa along its flanks toward Oasis Valley. Within the Thirsty Canyon fault zone, highly fractured rocks may serve also as a conduit, depending upon the degree of alteration and its effect on porosity and permeability. In the Oasis Valley region, other structures that may influence ground-water flow include the western and southern boundaries of the Oasis Valley basin, where the basement abruptly shallows.

Nevada↗
USGS1999

An interpretation of the 1997 airborne electromagnetic (AEM) survey, Fort Huachuca vicinity, Cochise County, Arizona

Executive Summary -- In March of 1997, an airborne electromagnetic (AEM) survey of the Fort Huachuca Military Reservation and immediate surrounds (location map, http://geopubs.wr.usgs.gov/open-file/of99-007-b/index.jpg) was conducted. This survey was sponsored by the U.S. Army and contracted through the Geologic Division of the U.S. Geological Survey (USGS). Data were gathered by Geoterrex-Dighem Ltd. of Ottawa, Canada. The survey aircraft is surrounded by a coil through which a large current pulse is passed. This pulse induces currents in the Earth which are recorded by a set of three mutually perpendicular coils towed in a 'bird' about 100 m behind and below the aircraft. The bird also records the Earth's magnetic field. The system samples the Earth response to the electromagnetic pulse about every 16 m along the aircraft flight path. For this survey, the bulk of the flightpaths were spaced about 400 m apart and oriented in a northeast-southwest direction extending from bedrock over the Huachuca Mountains to bedrock over the Tombstone Hills. A preliminary report on the unprocessed data collected in the field was delivered to the U.S. Army by USGS in July 1997 (USGS Open-File Report 97?457). The final data were delivered in March, 1998 by the contractor to USGS and thence to the U.S. Army. The present report represents the final interpretive report from USGS. The objectives of the survey were to: 1) define the structure of the San Pedro basin in the Sierra Vista-Fort Huachuca-Huachuca City area, including the depth and shape of the basin, and to delineate large faults that may be active within the basin fill and therefore important in the hydrologic regime; 2) define near surface and subsurface areas that contain a large volume fraction of silt and clay in the basin fill and which both reduce the volume of available storage for water and reduce the permeability of the aquifer; and 3) to evaluate the use of the time domain electromagnetic method in the southwest desert setting as a means of mapping depth to water. Chapter one, written by M.E. Gettings, reports the results of the analysis of the aeromagnetic anomaly data. Depths to magnetic rocks computed from these data are in good agreement with depths from gravity anomaly models (Gettings and Houser, in prep.) and confirm and refine the location of the bedrock highs which reach to within 200 m of the surface in several parts of the study area. The highly faulted and generally shallow character of the basin within the study area deduced from the gravity studies is also evident in the aeromagnetic data. The caldera ring fault delimiting the buried structural southwest edge of the Tombstone caldera is expressed in the magnetic data and deeper intrusives extending outside the caldera to the southwest are inferred. Several magnetic bodies occur at shallow depths within the Precambrian granite of the Huachuca Mountains along the eastern foothills of the mountains. These are inferred to be Tertiary intrusives but remain to be confirmed by field work if any of their uppermost dikes or apotheses are exposed. Faults delineating the east-west trending bedrock high beneath the city of Sierra Vista appear to be shallow and should be investigated for surface expressions. Chapter two, written by Jeff Wynn, analyzes and interprets the conductivity depth transforms (CDTs) and provides a general evaluation of the data quality. He concludes that there is a good general correlation between the uppermost conductor seen in the CDTs and water table depth in many cases. Detailed comparisons between the ground-based vertical electric soundings (VES) and the CDTs are reported in this chapter. The two sets of data compare well in general for most sounding sites where the VES data are not noisy.

Arizona↗
USGS1978

The hydrothermal system of Long Valley Caldera, California

Long Valley caldera, an elliptical depression covering 450 km 2 on the eastern front of the Sierra Nevada in east-central California, contains a hot-water convection system with numerous hot springs and measured and estimated aquifer temperatures at depths of 180?C to 280?C. In this study we have synthesized the results of previous geologic, geophysical, geochemical, and hydrologic investigations of the Long Valley area to develop a generalized conceptual and mathematical model which describes the gross features of heat and fluid flow in the hydrothermal system. Cenozoic volcanism in the Long Valley region began about 3.2 m.y. (million years) ago and has continued intermittently until the present time. The major event that resulted in the formation of the Long Valley caldera took place about 0.7 m.y. ago with the eruption of 600 km 3 or more of Bishop Tuff of Pleistocene age, a rhyolitic ash flow, and subsequent collapse of the roof of the magma chamber along one or more steeply inclined ring fractures. Subsequent intracaldera volcanism and uplift of the west-central part of the caldera floor formed a subcircular resurgent dome about 10 km in diameter surrounded by a moat containing rhyolitic, rhyodacitic, and basaltic rocks ranging in age from 0.5 to 0.05 m.y. On the basis of gravity and seismic studies, we estimate an aver- age thickness of fill of 2.4 km above the precaldera granitic and metamorphic basement rocks. A continuous layer of densely welded Bishop Tuff overlies the basement rocks, with an average thickness of 1.4 km; the fill above the welded Bishop Tuff consists of intercalated volcanic flows and tuffs and fluvial and lacustrine deposits. Assuming the average grain density of the fill is between 2.45 and 2.65 g/cm 3 , we calculate the average bulk porosity of the total fill as from 0.11 to 0.21. Comparison of published values of porosity of the welded Bishop Tuff exposed southeast of the caldera with calculated values indicates average bulk porosity for the welded tuff (including fracture porosity) from 0.05 to 0.10. Because of its continuity and depth and the likelihood of significant fracture permeability in the more competent rocks such as the welded tuff, our model of the hydrothermal system assumes that the Bishop Tuff provides the principal hot-water reservoir. However, because very little direct information exists from drill holes below 300 m, this assumption must be considered tentative. Long Valley caldera is drained by the Owens River and several tributaries which flow into Lake Crowley in the southeast end of the caldera. Streamflow and springflow measurements for water years 1964-74 indicate a total inflow to Lake Crowley of about 10,900 L/s. In contrast, the total discharge of hot water from the hydrothermal reservoir is about 300 L/s. For modeling purposes, the ground-water system is considered as comprising a shallow subsystem in the fill above the densely welded Bishop Tuff containing relatively cold ground water, and a deep subsystem or hydrothermal reservoir in the welded tuff containing relatively hot ground water. Hydrologic, isotopic, and thermal data indicate that recharge to the hydrothermal reservoir occurs in the upper Owens River drainage basin along the western periphery of the caldera. Temperature profiles in a 2.11- km-deep test well drilled by private industry in the southeastern part of the caldera suggest that an additional flux of relatively cool ground water recharges the deep subsystem around the northeast rim. Flow in the shallow ground-water subsystem is neglected in the model except in recharge areas and along Hot Creek gorge, where approximately 80 percent of the hot-water discharge from the hydrothermal reservoir moves upward along faults toward springs in the gorge. Heat-flow data from the Long Valley region indicate that the resurgent dome overlies a residual magma chamber more circular in plan than the original magma chamber that supplied the Bishop Tuff

California↗
USGS1982

Tertiary volcanic rocks and uranium in the Thomas Range and northern Drum Mountains, Juab County, Utah

The Thomas Range and northern Drum Mountains have a history of volcanism, faulting, and mineralization that began about 42 m.y. (million years) ago. Volcanic activity and mineralization in the area can be divided into three stages according to the time-related occurrence of rock types, trace-element associations, and chemical composition of mineral deposits. Compositions of volcanic rocks changed abruptly from rhyodacite-quartz latite (42-39 m.y. ago) to rhyolite (38-32 m.y. ago) to alkali rhyolite (21 and 6-7 m.y. ago); these stages correspond to periods of chalcophile and siderophile metal mineralization, no mineralization(?), and lithophile metal mineralization, respectively. Angular unconformities record episodes of cauldron collapse and block faulting between the stages of volcanic activity and mineralization. The youngest angular unconformity formed between 21 and 7 m.y. ago during basin-and-range faulting. Early rhyodacite-quartz latite volcanism from composite volcanoes and fissures produced flows, breccias, and ash-flow tuff of the Drum Mountains Rhyodacite and Mt. Laird Tuff. Eruption of the Mt. Laird Tuff about 39 m.y. ago from an area north of Joy townsite was accompanied by collapse of the Thomas caldera. Part of the roof of the magma chamber did not collapse, or the magma was resurgent, as is indicated by porphyry dikes and plugs in the Drum Mountains. Chalcophile and siderophile metal mineralization, resulting in deposits of copper, gold, and manganese, accompanied early volcanism. Te middle stage of volcanic activity was characterized by explosive eruption of rhyolitic ash-flow tuffs and collapse of the Dugway Valley cauldron. Eruption of the Joy Tuff 38 m.y. ago was accompanied by subsidence of this cauldron and was followed by collapse and sliding of Paleozoic rocks from the west wall of the cauldron. Landslides in The Dell were covered by the Dell Tuff, erupted 32 m.y. ago from an unknown source to the east. An ash flow of the Needles Range(?) Formation was erupted 30-31 m.y. ago from an unknown source. Mineralization probably did not occur during the rhyolitic stage of volcanism. The last stage of volcanism was contemporaneous with basin-and-range faulting and was characterized by explosive eruption of ash and pumice, forming stratified tuff, and by quiet eruption of alkali rhyolite as viscous flows and domes. The first episode of alkali rhyolite volcanism deposited the beryllium tuff and porphyritic rhyolite members of the Spor Mountain Formation 21 m.y. ago. After a period of block faulting, the stratified tuff and alkali rhyolite of the Topaz Mountain Rhyolite were erupted 6-7 m.y. ago along faults and fault intersections. Erosion of Spor Mountain, as well as explosive eruptions through dolomite, provided abundant dolomite detritus to the beryllium tuff member. The alkali rhyolite of both formations is fluorine rich, as is evident from abundant topaz, and contains anomalous amounts of lithophile metals. Alkali rhyolite volcanism was accompanied by lithophile metal mineralization which deposited fluorite, beryllium, and uranium. The structure of the area is dominated by the Thomas caldera and the younger Dugway Valley cauldron, which is nested within the Thomas caldera; the Thomas caldera is surrounded by a rim of Paleozoic rocks at Spor Mountain and Paleozoic to Precambrian rocks in the Drum Mountains. The Joy fault and Dell fault system mark the ring-fracture zone of the Thomas caldera. These structural features began to form about 39 m.y. ago during eruption of the Mt. Laird Tuff and caldera subsidence. The Dugway Valley cauldron sank along a series of steplike normal faults southeast of Topaz Mountain in response to collapse of the magma chamber of the Joy Tuff. Caldera structure was modified by block faulting between 21 and 7 m.y. ago, the time of widespread extensional faulting in the Basin and Range Province. Vents erupted alkali rhyolite 6-7 m.y. ago along basin-and-range faults.

Professional Paper↗
USGS2005

Metallogenesis and tectonics of the Russian Far East, Alaska, and the Canadian Cordillera

The Proterozoic and Phanerozoic metallogenic and tectonic evolution of the Russian Far East, Alaska, and the Canadian Cordillera is recorded in the cratons, craton margins, and orogenic collages of the Circum-North Pacific mountain belts that separate the North Pacific from the eastern North Asian and western North American Cratons. The collages consist of tectonostratigraphic terranes and contained metallogenic belts, which are composed of fragments of igneous arcs, accretionary-wedge and subduction-zone complexes, passive continental margins, and cratons. The terranes are overlapped by continental-margin-arc and sedimentary-basin assemblages and contained metallogenic belts. The metallogenic and geologic history of terranes, overlap assemblages, cratons, and craton margins has been complicated by postaccretion dismemberment and translation during strike-slip faulting that occurred subparallel to continental margins. Seven processes overlapping in time were responsible for most of metallogenic and geologic complexities of the region (1) In the Early and Middle Proterozoic, marine sedimentary basins developed on major cratons and were the loci for ironstone (Superior Fe) deposits and sediment-hosted Cu deposits that occur along both the North Asia Craton and North American Craton Margin. (2) In the Late Proterozoic, Late Devonian, and Early Carboniferous, major periods of rifting occurred along the ancestral margins of present-day Northeast Asia and northwestern North America. The rifting resulted in fragmentation of each continent, and formation of cratonal and passive continental-margin terranes that eventually migrated and accreted to other sites along the evolving margins of the original or adjacent continents. The rifting also resulted in formation of various massive-sulfide metallogenic belts. (3) From about the late Paleozoic through the mid-Cretaceous, a succession of island arcs and contained igneous-arc-related metallogenic belts and tectonically paired subduction zones formed near continental margins. (4) From about mainly the mid-Cretaceous through the present, a succession of continental-margin igneous arcs (some extending offshore into island arcs) and contained metallogenic belts, and tectonically paired subduction zones formed along the continental margins. (5) From about the Jurassic to the present, oblique convergence and rotations caused orogen-parallel sinistral, and then dextral displacements within the plate margins of the Northeast Asian and North American Cratons. The oblique convergences and rotations resulted in the fragmentation, displacement, and duplication of formerly more continuous arcs, subduction zones, passive continental margins, and contained metallogenic belts. These fragments were subsequently accreted along the margins of the expanding continental margins. (6) From the Early Jurassic through Tertiary, movement of the upper continental plates toward subduction zones resulted in strong plate coupling and accretion of the former island arcs, subduction zones, and contained metallogenic belts to continental margins. In this region, the multiple arc accretions were accompanied and followed by crustal thickening, anatexis, metamorphism, formation of collision-related metallogenic belts, and uplift; this resulted in the substantial growth of the North Asian and North American continents. (7) In the middle and late Cenozoic, oblique to orthogonal convergence of the Pacific Plate with present-day Alaska and Northeast Asia resulted in formation of the present ring of volcanoes and contained metallogenic belts around the Circum-North Pacific. Oblique convergence between the Pacific Plate and Alaska also resulted in major dextral-slip faulting in interior and southern Alaska and along the western part of the Aleutian- Wrangell arc. Associated with dextral-slip faulting was crustal extrusion of terranes from western Alaska into the Bering Sea.

Professional Paper↗