Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sedimentary Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
USGS1989

Geology and water resources of Owens Valley, California

Owens Valley, a long, narrow valley located along the east flank of the Sierra Nevada in east-central California, is the main source of water for the city of Los Angeles. The city diverts most of the surface water in the valley into the Owens River-Los Angeles Aqueduct system, which transports the water more than 200 miles south to areas of distribution and use. Additionally, ground water is pumped or flows from wells to supplement the surface-water diversions to the river-aqueduct system. Pumpage from wells needed to supplement water export has increased since 1970, when a second aqueduct was put into service, and local concerns have been expressed that the increased pumpage may have had a detrimental effect on the environment and the indigenous alkaline scrub and meadow plant communities in the valley. The scrub and meadow communities depend on soil moisture derived from precipitation and the unconfined part of a multilayered aquifer system. This report, which describes the hydrogeology of the aquifer system and the water resources of the valley, is one in a series designed to (1) evaluate the effects that ground-water pumping has on scrub and meadow communities and (2) appraise alternative strategies to mitigate any adverse effects caused by pumping. Two principal topographic features are the surface expression of the geologic framework--the high, prominent mountains on the east and west sides of the valley and the long, narrow intermountain valley floor. The mountains are composed of sedimentary, granitic, and metamorphic rocks, mantled in part by volcanic rocks as well as by glacial, talus, and fluvial deposits. The valley floor is underlain by valley fill that consists of unconsolidated to moderately consolidated alluvial fan, glacial and talus, and fluvial and lacustrine deposits. The valley fill also includes interlayered recent volcanic flows and pyroclastic rocks. The bedrock surface beneath the valley fill is a narrow, steep-sided graben that is structurally separated into the Bishop Basin to the north and the Owens Lake Basin to the south. These two structural basins are separated by (1) a bedrock high that is the upper bedrock block of an east-west normal fault, (2) a horst block of bedrock (the Poverty Hills), and (3) Quaternary basalt flows and cinder cones that intercalate and intrude the sedimentary deposits of the valley fill. The resulting structural separation of the basins allowed separate development of fluvial and lacustrine depositional systems in each basin. Nearly all the ground water in Owens Valley flows through and is stored in the saturated valley fill. The bedrock, which surrounds and underlies the valley fill, is virtually impermeable. Three hydrogeologic units compose the valley-fill aquifer system, a defined subdivision of the ground-water system, and a fourth represents the valley fill below the aquifer system and above the bedrock. The aquifer system is divided into horizontal hydrogeologic units on the basis of either (1) uniform hydrologic characteristics of a specific lithologic layer or (2) distribution of the vertical hydraulic head. Hydrogeologic unit 1 is the upper unit and represents the unconfined part of the system, hydrogeologic unit 2 represents the confining unit (or units), and hydrogeologic unit 3 represents the confined part of the aquifer system. Hydrogeologic unit 4 represents the deep part of the ground-water system and lies below the aquifer system. Hydrogeologic unit 4 transmits or stores much less water than hydrogeologic unit 3 and represents either a moderately consolidated valley fill or a geologic unit in the valley fill defined on the basis of geophysical data. Nearly all the recharge to the aquifer system is from infiltration of runoff from snowmelt and rainfall on the Sierra Nevada. In contrast, little recharge occurs to the system by runoff from the White and Inyo Mountains or from direct precipitation on the valley floor. Ground water flows from the margins of the valley towards the center of the valley; the ground water then flows south to the terminus of the system at Owens (dry) Lake. Ground water flows south from Bishop Basin to Owens Lake Basin through the narrows that constrict the flow opposite Poverty Hills. The aquifer system in the northern half of Owens Lake Basin is divided into east and west halves by the barrier effect caused by the Owens Valley fault. Discharge from the aquifer system is primarily by pumpage and evapotranspiration, and to a lesser extent by flowing wells, springs, underflow, and leakage to the Owens River-Los Angeles aqueduct system. Withdrawals from pumped or flowing wells is the largest component of discharge and accounts for about 50 percent of the outflow from the system. Transpiration by scrub and meadow plant communities, and to a lesser extent by irrigated alfalfa pasture, accounts for about 40 percent of the system's discharge. Natural hydraulic conductivity ranges from less than 400 to about 12,000 feet per day in the basalt flows, the more permeable material in the aquifer system. Where the basalts are fractured by explosives and drilling techniques, actual transmissivities can be greater than 1,000,000 feet squared per day. Hydraulic conductivities in sedimentary deposits of the aquifer system range from less than a few feet per day in lacustrine clays to more than 300 feet per day in gravel stringers and beach deposits in the transition zone between alluvial fan deposits and fluvial and lacustrine deposits. Degree of confinement in the aquifer system generally increases to the south and east in both the Bishop and Owens Lake Basins. The vertical hydraulic gradient across hydrogeologic unit 2 and confining beds in hydrogeologic units 1 and 3 is a function of (1) the asymmetric recharge and hydraulic head created by the dominant recharge from Sierra Nevada runoff and (2) the areal extent and thickness of the confining beds. Although most of the pumpage is from hydrogeologic unit 3, some coincident drawdown has been recorded in nonpumped wells that tap unit 1. Drawdown in hydrogeologic unit 1 is a function of changes in (1) lateral flow through hydrogeologic unit 1, (2) upward flow of ground water through the confining beds, (3) downward leakage of water from hydrogeologic unit 1 to unit 3 through wells, (4) direct withdrawal from well intervals open to hydrogeologic unit 1, and (5) increased evapotranspiration. The water in the aquifer system is generally of excellent quality for public supply and irrigation, with the exception of water stored in thick sequences of lacustrine silts and clays near Owens Lake. The water is principally a calcium bicarbonate type and dissolved-solids concentrations range from approximately 104 to 325 milligrams per liter. Water in the lacustrine sediments of Owens (dry) Lake is a sodium bicarbonate type and dissolved-solids concentrations are about 5,400 milligrams per liter.

California↗
USGS2007

Thermal history of low metamorphic grade Paleoproterozoic sedimentary rocks of the Penokean orogen, Lake Superior region: Evidence for a widespread 1786 Ma overprint based on xenotime geochronology

Paleoproterozoic strata in northern Michigan, Wisconsin, and Minnesota were deposited between 2.3 and 1.75 Ga within the rifted margin and subsequent foreland basin of the Penokean orogen. These strata show evidence for multiple regional metamorphic events previously attributed entirely to the Penokean orogeny (1875-1835 Ma). Metasandstones from the Marquette Range Supergroup and the Animikie, Mille Lacs, and North Range Groups were sampled at multiple localities across Minnesota, Wisconsin and Michigan for metamorphic xenotime suitable for in situ SHRIMP U-Pb geochronology. All samples are from the northern Penokean foreland basin where the metamorphic grade is greenschist to sub-greenschist and the strata are virtually undeformed. Xenotime U-Pb ages in these samples have a bimodal population with means of 1786 ?? 4 Ma (n = 32) and 1861 ?? 10 Ma (n = 9). Xenotime of both ages are contained in metasandstones from the basal Chocolay Group in Michigan and Wisconsin and the Mille Lacs Group and North Range Groups in Minnesota. The older age records a regional low-temperature thermal event that is slightly older than the overlying Menominee Group in Michigan and the Animikie Group in Minnesota and Ontario. This 1861 Ma event coincides with regional uplift that led to the formation of the unconformity between the Menominee Group and the overlying Baraga Group in Michigan; hence xenotime growth must have occurred at shallow burial depths. Younger units from the Menominee and Baraga Groups in Michigan and the Animikie Group in Minnesota, record only the 1786 Ma event. A dominant 1800-1790 Ma metamorphic monazite population that overprints Penokean-interval monazite has been documented within amphibolite- to granulite-facies rocks immediately north of the Niagara Fault Zone within the vicinity of gneiss domes and granitic plutons. In contrast, the 1786 Ma xenotime ages are from low-grade, virtually undeformed rocks 50-150 km from the high-grade zones and thus do not appear to reflect a local thermal imprint. Rather, the geographic extent of the 1786 Ma xenotime growth event suggests that it reflects a basin-wide, subtle thermal pulse. It is proposed that the xenotime ages record widespread subtle heating triggered by renewed subduction along the orogen due to Yavapai-interval convergence. The 1800-1700 Ma Yavapai terrane forms an accretionary belt throughout the central and southwestern U.S. and truncates the southern part of the Penokean orogen in central Wisconsin and southeastern Minnesota, about 200 km south of the sample sites. Alternatively, an 1800-1765 Ma interval of gravitational collapse of overthickened crust of the Penokean orogen immediately north of the Niagara Fault Zone may have driven a northward flow of hydrothermal fluids which subtly but pervasively altered the northern parts of the Penokean foreland and resulted in xenotime growth. ?? 2007 Elsevier B.V. All rights reserved.

Precambrian Research↗
USGS2021

Preliminary geohydrologic assessment of Buenos Aires National Wildlife Refuge, Altar Valley, southeastern Arizona

The Buenos Aires National Wildlife Refuge is located in the southern part of Altar Valley, southwest of Tucson in southeastern Arizona. The primary water-supply well at the Buenos Aires National Wildlife Refuge has experienced a two-decade decrease in groundwater levels in the well, as have other wells in the southern part of Altar Valley. In part to understand this trend, a study was undertaken by the U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service, to summarize what is known about the geohydrologic system on the refuge and analyze groundwater-level trends and precipitation-groundwater correlations. In addition, available data were compiled where possible on the climate, land cover, soils, geology, and hydrology to provide a foundation for future modeling of the system. Altar Valley is a sedimentary basin bounded by a mixture of Paleozoic to Tertiary sedimentary, volcanic, granitic, and metamorphic rocks. The valley fill is undifferentiated Tertiary to Quaternary sediments underlain by middle Miocene to Pliocene rocks that consist of moderately to strongly consolidated conglomerate and sandstone. Surface water, when present in the predominantly ephemeral streams of the valley, flows from south to north. Arivaca Creek has a cienega (or wetland) where groundwater surfaces before it flows as a short perennial reach out of Arivaca Basin. Groundwater maps compiled between 1934 and 2016 showed groundwater flowing from south to north. Before the 1980s, temporal patterns of groundwater levels in wells in Altar Valley varied substantially from one well to another. In the mid-1980s, comparatively high levels of precipitation occurred: the 1980s median value was 15.3 inches, whereas the median for the period of record was 13.2 inches. In addition, apparently corresponding groundwater level increases were seen in nearly all wells studied. After this initial increase, two different groundwater-level trends began to be observed in two spatially distinct sets of wells: in the northern part, groundwater levels were relatively steady, whereas in the southern part, groundwater levels declined from 10 to 20 feet between 1990 and 2019. Annual groundwater pumpage declined substantially in the northern part of the valley beginning in the early 1980s, but it began to increase again in the 1990s. Pumpage in the southern part has remained low and relatively steady compared to the northern part. Although the precise reasons for the declining groundwater levels in the southern part remain unclear, groundwater levels may be affected by factors such as climate cycles, long-term drought, and temperature-induced declines in recharge, resulting in increased evapotranspiration. Preliminary analyses of two wells, one selected from each part of the valley, using linear regression and lag correlation to investigate correlation between annual precipitation and groundwater levels, showed a maximum correlation at a lag of about 17 years in the southern part of the valley and about 25 years in the northern part, indicating that, although variable sources and traveltimes of recharged water may be needed to propagate to each location, the strongest correlation at each well is with precipitation that was recharged 17 and 25 years prior to the groundwater response in that well. Assuming a constant flow of groundwater from the southern to the northern part of the valley, a decrease in recharge is expected to lead to a decrease in aquifer storage. As to the comparatively stable groundwater levels in the northern part, pumpage is still only about one-half what it was in the early 1980s, even though pumpage has increased there since the 1990s. Water levels in most wells in the northern part were drawn down prior to the decrease in pumping in the early 1980s, possibly owing to a combination of pumping and the nearly 20-year midcentury drought that occurred between 1940 and 1960. Water levels were in the process of recovering when the increase in pumping occurred in the 1990s. Because the water levels were recovering (increasing) instead of remaining static, the increased pumping may have only limited the recovery rather than causing a decrease in water levels, as a new quasi-equilibrium state may have been reached. Additional possible causes for the stable groundwater levels include (1) upgradient aquifer transmissivity that was high enough to offset pumping, (2) a low-permeability barrier, such as bedrock or clay, at the north end of the valley that caused groundwater pooling, (3) higher lateral inflow of groundwater in the northern part of the valley, (4) a delay in the effect of storage declines propagating from the south, or (5) some combination thereof.

Arizona↗
USGS2003

Age constraints on Tarkwaian palaeoplacer and lode-gold formation in the Tarkwa-Damang district, SW Ghana

Two major epigenetic gold-forming events are recorded in the world-class gold province of southwest Ghana. A pre-Tarkwaian event was the source of the world-class Tarkwa palaeoplacers whereas post-Birimian and Tarkwaian deformation, which was related to the Eburnean orogeny, gave rise to the world-class (e.g. Prestea) to giant (e.g. Obuasi) orogenic gold deposits which have made the region famous for more than 2,500 years. A maximum age of 2133 ?? 4 Ma for Tarkwaian sedimentation is provided by 71 of 111 concordant SHRIMP II U Pb dates from detrital zircons in Tarkwaian clastic rocks from Damang and Bippo Bin, northeast of Tarkwa. The overall data distribution broadly overlaps the relatively poorly constrained ages of Birimian volcanism and associated Dixcove-type granitoid emplacement, indicating syntectonic development of the Tarkwaian sedimentary basin. These zircon ages argue against derivation of the palaeoplacer gold from an orogenic gold source related to the compressional phase of an orogeny significantly older than the Eburnean orogeny. Instead, they suggest that the gold source was either orogenic gold lodes related to an earlier compressional phase of a diachronous Eburnean orogeny or ca. 2200-2100 Ma intrusion-related gold lode. The CO2-rich fluid inclusions in associated vein-quartz pebbles are permissive of either source. At the Damang deposit, an epigenetic, orogenic lode-gold system clearly overprinted, and sulphidised low-grade palaeoplacer hematite magnetite gold occurrences in the Banket Series conglomerate within the Tarkwaian sedimentary sequence. Gold mineralisation is demonstrably post-peak metamorphism, as gold-related alteration assemblages overprint metamorphic assemblages in host rocks. In alteration zones surrounding the dominant, subhorizontal auriferous quartz veins, there are rare occurrences of hydrothermal xenotime which give a SHRIMP U Pb age of 2063 ?? 9 Ma for gold mineralisation. The similar structural timing of epigenetic gold mineralisation in Tarkwaian host rocks at Damang to that in mainly Birimian host rocks elsewhere in southwest Ghana, particularly at Obuasi, suggests that 2063 ?? 9 Ma is the best available age estimate for widespread orogenic gold mineralisation in the region. Argon-argon ages of 2029 ?? 4 and 2034 ?? 4 Ma for hydrothermal biotite from auriferous quartz veins appear to represent uplift and cooling of the region below about 300??C, as estimates of the temperature of gold mineralisation are higher, at around 400??C. If peak metamorphism, with temperatures of about 550??C, is assumed to have occurred at about 2100 Ma, the biotite ages, in combination with the xenotime age, suggest a broadly constant uplift rate for the region of about 1 km per 10 million years from about 2100 to 2025 Ma.

Mineralium Deposita↗
USGS1989

Application of the Graphic Correlation method to Pliocene marine sequences

Biostratigraphy — the use of paleontological evidence to establish relative chronologies, forms the cornerstone of many sedimentary geological investigations. Several different approaches to biochronology are available. Traditional interval zones, defined on lowest and/or highest occurrences of selected taxa, are used to place bodies of rock in a relative chronological framework. Fossil datum levels, which are more numerous than zones, are often used as chronohorizons for correlation purposs. The Graphic Correlation method, like interval zonations, synthesizes information from a number of different taxa but does not assume synchrony of any one taxon. A magnetobiostratigraphic model for deep-sea Pliocene sequences has been constructed by graphic correlation of Deep Sea Drilling project cores from the North Atlantic (606), Caribbean Sea (502), South Atlantic (516), Tasman Sea (590), Equatorial Pacific (573) and North Pacific (577). All cores are hydraulic piston cores which contain abundant planktonic foraminifers, calcareous nannofossils and which record many of the magnetic reversals expected in the Pliocene. The model is based on internally consistent paleontologic data gathered by the author. This study demonstrates the advantages of graphic correlation over conventional biostratigraphic procedures. Accurate inter-regional correlations can be made between core sites without resorting to multiple microfossil zonations and without invoking synchrony of fossil events. Important results of this study are: (1) many Pliocene planktonic foraminifer and calcareous nannofossil events are diachronous by more than 0.20 m.y., (2) Globorotalia truncatulinoides first occurs in the Southwest Pacific Ocean, approximately 0.50 m.y. earlier than previously reported, (3) a previously undetected hiatus of short duration (0.38 m.y.) exists just above the Cochiti subchron at DSDP 577A.

Marine Micropaleontology↗
USGS2021

Onshore flow characteristics of the 1755 CE Lisbon tsunami: Linking forward and inverse numerical modeling

The 1755 CE Lisbon earthquake triggered the largest historical tsunami ever impacting the Atlantic coasts of Europe. Despite recent efforts to better understand this event, there are still unanswered questions about the location of its epicenter and whether physical and historical evidences are in agreement. Inverse modeling using tsunami sediments can be applied to quantify onshore flow characteristics. Forward numerical modeling is also a powerful tool capable of simulating tsunami hydrodynamics and the induced sediment transport. This work presents novel results from a combination of inverse and forward modeling to assess tsunami characteristics onshore. The study site is located on the Portuguese southern coast, at the Salgados lowland where inverse modeling was performed using TsuSedMod ( Jaffe and Gelfenbaum, 2007 ) based on data retrieved from sediment samples. Forward modeling, including tsunami generation and propagation, was performed using the FLOW module of Delft3D suite model. Onshore topography was corrected for the 1755 CE scenario based on extensive tsunami sedimentary deposit thickness data. The tsunami source was chosen based on recent results from the authors that pointed to a good correlation between modeled and field tsunami data for the Marques de Pombal Fault (MPF), Horseshoe Fault (HSF) and a hypothetical scenario represented by a simple combination between Gorringe Bank and Horseshoe Fault (Scenario 1 - SC1). Results from inverse model show tsunami onshore average speed varying from 7.3 up to 9.3 m/s and shear velocities from 0.52 up to 0.66 m/s. Forward modeling results show a wide variation according to the seismic source and tsunami onshore velocities can range from around 7 m/s when considering MPF to even an absence of inundation (SC1). The good agreement between both modeling approaches estimating tsunami velocity confirms the potential of numerical modeling coupled with geological records to improve the understanding of historical events.

Marine Geology↗
USGS2015

Update of the Graizer-Kalkan ground-motion prediction equations for shallow crustal continental earthquakes

A ground-motion prediction equation (GMPE) for computing medians and standard deviations of peak ground acceleration and 5-percent damped pseudo spectral acceleration response ordinates of maximum horizontal component of randomly oriented ground motions was developed by Graizer and Kalkan (2007, 2009) to be used for seismic hazard analyses and engineering applications. This GMPE was derived from the greatly expanded Next Generation of Attenuation (NGA)-West1 database. In this study, Graizer and Kalkan’s GMPE is revised to include (1) an anelastic attenuation term as a function of quality factor (Q0) in order to capture regional differences in large-distance attenuation and (2) a new frequency-dependent sedimentary-basin scaling term as a function of depth to the 1.5-km/s shear-wave velocity isosurface to improve ground-motion predictions for sites on deep sedimentary basins. The new model (GK15), developed to be simple, is applicable to the western United States and other regions with shallow continental crust in active tectonic environments and may be used for earthquakes with moment magnitudes 5.0–8.0, distances 0–250 km, average shear-wave velocities 200–1,300 m/s, and spectral periods 0.01–5 s. Directivity effects are not explicitly modeled but are included through the variability of the data. Our aleatory variability model captures inter-event variability, which decreases with magnitude and increases with distance. The mixed-effects residuals analysis shows that the GK15 reveals no trend with respect to the independent parameters. The GK15 is a significant improvement over Graizer and Kalkan (2007, 2009), and provides a demonstrable, reliable description of ground-motion amplitudes recorded from shallow crustal earthquakes in active tectonic regions over a wide range of magnitudes, distances, and site conditions.

Open-File Report↗
USGS2002

Stratigraphy and paleontology of Lower Permian rocks north of Cananea, northern Sonora, Mexico

Lower Permian carbonate and overlying red bed clastic rocks are present in a 2 km2 stratigraphic window in the vicinity of Rancho La Cueva, Santa Cruz sheet (scale 1:50,000), northern Sonora, Mexico. This exposure lies unconformably beneath predominantly intermediate Upper Cretaceous volcanics yielding 40Ar/39Ar ages of 73.4?? 0.18 and 71.1 ?? 0.35 Ma. The lower part of the Permian succession consists of light- to medium-gray colored limestones of the Colina Limestone, with a minimum thickness of 235 m. Sedimentary features suggest shallow water, slightly restricted depositional environments. Although lacking observable fossils for the most part, two intervals of richly fossiliferous, silicified shell beds are present near the base and top of the Colina Limestone. The lower fauna consist mostly of gastropods and bivalves. The presence of a new microdomatid gastropod species. Glyptospira sonorensis n. sp., close to Glytospira arelela Plas, suggests a late Wolfcampian age for this horizon. The upper fauna are predominantly molluscan dominated (gastropods and bivalves), but some brachiopods (productids and the rhynchonellid genus Pontisia) are also present. Gastropod genera include Bellerophon, Warthia, Euomphalus (represented by the species, Euomphalus kaibabensis Chronic), Baylea, Worthenia, Naticopsis, Goniasma, Kinishbia, Cibecuia, and Glyptospira. The gastropods suggest a Leonardian (late Early Permian) age for this horizon, and many of the species have previously been recorded from the Supai Group and Kaibab Formation of northern and central Arizona. The Colina Limestone is conformably overlain by 11.2 m of light-gray lime mudstone and dolostone, assigned here to the Epitaph Dolomite, which in turn is succeeded by 58.8 m of red-colored sandstone and gray lime mudstone, assigned here to the Scherrer Formation. This Lower Permian succession is significant because it further strengthens the stratigraphic ties of southeastern Arizona rocks with those of northern Sonora and confirms the presence of North American cratonal stratigraphy in the northern part of the state of Sonora, Mexico. Published by Elsevier Science Ltd.

Journal of South American Earth Sciences↗
USGS1964

Chemical quality of surface waters and sedimentation in the Saline River basin, Kansas

This report gives the results of an investigation of the sediment and dissolved minerals that are transported by the Saline River and its tributaries. The Saline River basin is in western and central Kansas; it is long and narrow and covers 3,420 square miles of rolling plains, which is broken in some places by escarpments and small areas of badlands. In the western part the uppermost bedrock consists predominantly of calcareous elastic sedimentary rocks of continental origin of Pliocene age and in most places is covered by eolian deposits of Pleistocene and Recent age. In the central part the ex posed bedrock consists predominantly of calcareous marine sedimentary rocks of Late Cretaceous age. In the eastern part the exposed bedrock consists mainly of noncalcareous continental and littoral elastic sedimentary rocks of Early Cretaceous and Permian age. Fluvial deposits are in the valleys, and eolian materials are present over much of the uplands. Average precipitation increases rather uniformly from about 18 inches per year in the west to almost 28 inches per year in the east. Runoff is not affected by irrigation nor regulated by large structures, but it is closely related to precipitation. Average runoff increases from less than 0.2 inch per year in the west to more than 1.5 inches per year in the east. Aquifers of the flood-plain and terrace deposits and of the Cretaceous Dakota Sandstone are the major sources of ground-water accretion to the streams. In the upper reaches of the Saline River, the water is only slightly mineralized; during the period of record the specific conductance near Wakeeney never exceeded 750 micromhos per centimeter. In the lower reaches, however, the water is slightly mineralized during periods of high flow and is highly mineralized during periods of low flow; the specific conductance near Russell exceeded 1,500 micromhos per centimeter more than 80 percent of the time. Near Russell, near Wilson, and at Tescott the water is of the calcium bicarbonate type when the specific conductance is less than about 1,000 micromhos per centimeter, but it is of the sodium chloride type when the specific conductance is more than about 1,500 micromhos per centimeter. The water is off the calcium bicarbonate, sodium bicarbonate, or sodium chloride type when the conductance is between 1,000 and 1,500 micromhos per centimeter. Most of the increase in mineralization of the water is caused by inflow of highly mineralized ground water. The ground-water inflow was estimated to be 22 percent of the total streamflow at Tescott in 1948 and 60 percent in 1952. Mineralization increases and water quality deteriorates progressively downstream along nearly the entire Saline River, especially in the part of the area directly underlain by the Dakota Sandstone between the vicinities of Fairport and Wilson: sodium and chloride are the principal constituents of water contributed by the Dakota. The total percentage of the salt in the Saline River that comes from oil-field brines is considered to be small. The water in the upper Saline River is of good quality for domestic use except that it is hard; the water in the lower Saline River is of poor quality for domestic use because most of the time it is highly mineralized, is hard, and contains high concentrations of chloride and sulfate. In the upper reaches of the river, the water is of good quality for irrigation. In the lower reaches, if the water were impounded in a reservoir, it would be of good quality for irrigation during years of high flow and of very poor quality during years of low flow. The water in the lower reaches is of poor quality for industrial use because it is highly mineralized most of the tinge. Relations of suspended-sediment discharge to water discharge were used with the long-term streamflow duration curves to compute the long-term aver age suspended-sediment discharges and concentrations at five indications. Sediment discharge is closely related to runoff. S

Water Supply Paper↗
USGS1985

Preliminary evaluation of the landsat-4 thematic mapper data for mineral exploration

Landsat-4 Thematic Mapper (TM) data recorded over an arid terrain were analyzed to determine the applicability of using of TM data for identifying and mapping hydrothermally altered, potentially mineralized rocks. Clays, micas, and other minerals bearing the OH anion in specific crystal lattice positions have absorption bands in the 2.2-??m region (TM channel 7, TM7) and commonly lack features in the 1.6-??m region (TM5). Channel ratios TM5/TM7, TM5/TM4, and TM3/TM1 were combined into a color-ratio-composite (CRC) image and used to distinguish hydrothermally altered rocks, unaltered rocks, and vegetation. These distinctions are made possible by using the TM5 and TM7, channels which are not available in the Landsat multispectral scanner (MSS). Digital masking was used to eliminate ambiguities due to water and shadows. However, some ambiguities in identification resulted between altered volcanic rocks and unaltered sedimentary deposits that contained clays, carbonates, and gypsum, and between altered volcanic rocks and volcanic tuffs diagenetically altered to zeolites. However, compared to MSS data, TM data should greatly improve the ability to map hydrothermally altered rocks in arid terrains. ?? 1985.

Advances in Space Research↗
USGS2022

The role of organic matter diversity on the Re-Os systematics of organic-rich sedimentary units: Insights into the controls of isochron age determinations from the lacustrine Green River Formation

The range of 187 Re/ 188 Os values measured from samples of five organic-rich lacustrine mudstones units in the Eocene Green River Formation in the easternmost Uinta Basin covaries with organic matter diversity driven by changing water column conditions. A set of samples from the Douglas Creek Member has the highest pristane/phytane ratio and lowest β-carotane/ n -C 30 ratio compared to overlying units, indicating deposition in an oxic-anoxic environment with low salinity that would have allowed for the accumulation of a diverse assemblage of aquatic organisms. These samples define the broadest 187 Re/ 188 Os range of 1504. In contrast, samples from the R6 and Mahogany zones possess lower pristane/phytane ratios and higher β-carotane/ n -C 30 ratios indicating deposition in a more restricted lacustrine environment with elevated salinities and alkalinities that would have limited aquatic organic matter diversity. The R6 and Mahogany zones have the narrowest range of 187 Re/ 188 Os values measured in this study of 254.9 and 154.6, respectively. As noted by previous workers, these results suggest that organic matter diversity plays a primary role in determining the range of 187 Re/ 188 Os ratios in a sample set, and in turn the uncertainty of Re-Os age determinations from organic-rich sedimentary rocks. The Re-Os data from the R3 zone and R6 zone yield ages of 49.7 ± 3.4 Ma and 42.0 ± 18 Ma, respectively, which are statistically indistinguishable based on 2σ uncertainty from three previously reported Re-Os age determinations and those provided by 40 Ar/ 39 Ar geochronology of interbedded volcanic ash beds. Although the age uncertainty is high, these findings further highlight the importance of Re-Os geochronology in lacustrine basins, particularly those with thick mudstone successions that lack volcanic ash layers, reliable biostratigraphy , or magnetostratigraphic control. In these cases, even ages with large uncertainties can be useful to constrain burial history and thermal history models. Together, the initial 187 Os/ 188 Os ratios of five sets of samples analyzed from the Uinta Basin define the largest Os isotope stratigraphic record from any lacustrine basin compiled to date and record a shift from a value of 1.40 to 1.48 between the R3 and R4 zones in the lower part of the Parachute Creek Member. This small shift may signify a change in the chemical weathering products that entered the lake preserved 20 to 50 m above the contact between the Douglas Creek and the lower Parachute Creek members during a period when the basin transitioned from a shallow lake with mostly open hydrology to an alkaline lake with more frequent basin restrictions.

Colorado, Utah, Wyoming↗
USGS2016

Tomographic Rayleigh-wave group velocities in the Central Valley, California centered on the Sacramento/San Joaquin Delta

If shaking from a local or regional earthquake in the San Francisco Bay region were to rupture levees in the Sacramento/San Joaquin Delta then brackish water from San Francisco Bay would contaminate the water in the Delta: the source of fresh water for about half of California. As a prelude to a full shear-wave velocity model that can be used in computer simulations and further seismic hazard analysis, we report on the use of ambient noise tomography to build a fundamental-mode, Rayleigh-wave group velocity model for the region around the Sacramento/San Joaquin Delta in the western Central Valley, California. Recordings from the vertical component of about 31 stations were processed to compute the spatial distribution of Rayleigh wave group velocities. Complex coherency between pairs of stations were stacked over 8 months to more than a year. Dispersion curves were determined from 4 to about 18 seconds. We calculated average group velocities for each period and inverted for deviations from the average for a matrix of cells that covered the study area. Smoothing using the first difference is applied. Cells of the model were about 5.6 km in either dimension. Checkerboard tests of resolution, which is dependent on station density, suggest that the resolving ability of the array is reasonably good within the middle of the array with resolution between 0.2 and 0.4 degrees. Overall, low velocities in the middle of each image reflect the deeper sedimentary syncline in the Central Valley. In detail, the model shows several centers of low velocity that may be associated with gross geologic features such as faulting along the western margin of the Central Valley, oil and gas reservoirs, and large cross cutting features like the Stockton arch. At shorter periods around 5.5s, the model’s western boundary between low and high velocities closely follows regional fault geometry and the edge of a residual isostatic gravity low. In the eastern part of the valley, the boundaries of the low velocity zone and gravity anomaly are better aligned at longer periods (around 10.5s) suggesting that the eastern edge of the gravity low is associated with deeper structure. There is a strong correspondence between a low in gravity near the Kirby Hills fault and low velocities from the ambient noise tomography. At longer periods, higher velocities creep in from the east and narrow the overall dimension defined by the lower velocities. Overall, there is a strong correspondence between the shape and location of low velocities in the Rayleigh wave velocity images, and geological and geophysical features.

California↗
USGS2016

Continental Shelf Morphology and Stratigraphy Offshore San Onofre, CA: The Interplay Between Rates of Eustatic Change and Sediment Supply

New high-resolution CHIRP seismic data acquired offshore San Onofre, southern California reveal that shelf sediment distribution and thickness are primarily controlled by eustatic sea level rise and sediment supply. Throughout the majority of the study region, a prominent abrasion platform and associated shoreline cutoff are observed in the subsurface from ~ 72 to 53 m below present sea level. These erosional features appear to have formed between Melt Water Pulse 1A and Melt Water Pulse 1B, when the rate of sea-level rise was lower. There are three distinct sedimentary units mapped above a regional angular unconformity interpreted to be the Holocene transgressive surface in the seismic data. Unit I, the deepest unit, is interpreted as a lag deposit that infills a topographic low associated with an abrasion platform. Unit I thins seaward by downlap and pinches out landward against the shoreline cutoff. Unit II is a mid-shelf lag deposit formed from shallower eroded material and thins seaward by downlap and landward by onlap. The youngest, Unit III, is interpreted to represent modern sediment deposition. Faults in the study area do not appear to offset the transgressive surface. The Newport Inglewood/Rose Canyon fault system is active in other regions to the south (e.g., La Jolla) where it offsets the transgressive surface and creates seafloor relief. Several shoals observed along the transgressive surface could record minor deformation due to fault activity in the study area. Nevertheless, our preferred interpretation is that the shoals are regions more resistant to erosion during marine transgression. The Cristianitos fault zone also causes a shoaling of the transgressive surface. This may be from resistant antecedent topography due to an early phase of compression on the fault. The Cristianitos fault zone was previously defined as a down-to-the-north normal fault, but the folding and faulting architecture imaged in the CHIRP data are more consistent with a strike-slip fault with a down-to-the-northwest dip-slip component. A third area of shoaling is observed off of San Mateo and San Onofre creeks. This shoaling has a constructional component and could be a relict delta or beach structure. (C) 2015 Elsevier B.V. All rights reserved.

California↗
USGS1967

Time and space relationships of the taconic allochthon and autochthon

The Taconic rock sequence extends from near Sudbury, Vermont, to near Poughkeepsie, New York, a length of about 150 miles; and from just west of the Green Mountain Range and Berkshire Highlands to the valleys of the Hudson River and Lake Champlain, a width of about 20 miles. The Taconic rocks are now in the axial region of the Middlebury synclinorium and its southward extension. The Taconic sequence consists of about 2000 feet of slate, with subsidiary graywacke, quartzite, and limestone; many of the rock units are turbidites. Fossils from the rocks include forms of Early, Middle, and Late Cambrian and Early and Middle Ordovician age. Evidence of stratigraphic tops derived from the fossils and from primary sedimentary features agrees with structural data and demonstrates that the Taconic rocks are geometrically the highest strata within the Middlebury synclinorium. The underlying rocks of the synclinorium (the synclinorium sequence) are right side up; they also range in age from Early Cambrian to Middle Ordovician but belong to a different sedimentary lithofacies (dominantly carbonate and orthoquartzite). The relation between the Taconic sequence and the synclinorium sequence, therefore, is a baffling problem. Lithostratigraphically, the Taconic sequence falls into three groups: (1) the pre- Normanskill "low Taconic " sequence, occurring in the area between the main Taconic Range and the Hudson River, as far south as Rhinebeck, New York; (2) the Normanskill Shale in the same area, as well as in the area south of Rhinebeck at least as far as Poughkeepsie, New York, and also west of the Hudson River; and (3) the "high Taconic " sequence, occupying the main Taconic Range from Dorset Mountain, Vermont, south to Indian Mountain in Sharon, Connecticut, as well as Mount Greylock in Massachusetts. Rocks of (1) and (2) are fossiliferous, but to date no fossil has been found in (3). Rocks of (1) and that part of (2) areally coextensive with (1) thus are of known age but uncertain three-dimensional geometric configuration, whereas rocks of (3) are of known configuration (in the centers of open synclinoria) but unknown age. Only that part of (2) beyond the areal confines of (1) is both of known age and known configuration; these rocks are in sedimentary contact above the older rocks of the synclinorium sequence and are autochthonous. At the north end of the Taconic sequence in western Vermont, rocks of group (1) are beyond reasonable doubt allochthonous. Because of the southward geometric continuity of the structural elements, all the Taconic rocks of group (1), and that part of group (2) areally coextensive with it, are interpreted as allochthonous. The structure of group (3), the high Taconic sequence, is inferred by topography and by detailed lithostratigraphic matching with rocks of the east Vermont sequence; on this basis, as well as on the basis of the broad lithic similarity with rocks of group (1), rocks of group (3) are concluded to be also allochthonous. A discontinuous polymict conglomerate underlies and surrounds the allochthon on all sides and is interpreted here as a record that dates the imminent arrival of the allochthon at each locality. The conglomerate contains unsorted blocks of rocks of both the Taconic sequence and the synclinorium sequence; the matrix is the autochthonous upper Normanskill Shale or its equivalent. Fossils from the matrix shale date the event as Trenton, probably Sherman Fall in age. The geologic history of the area is reconstructed as follows: The pre-Normanskill Taconic rocks were deposited in the area of the present Precambrian massifs of the Green Mountains-Berkshire Highlands belt between the clastic, eugeosynclinal east Vermont sequence to the east and the miogeosynclinal synclinorium sequence to the west; they constitute the transitional facies between these two belts. Conditions were relatively stable until early Middle Ordovician time , when the Green Mountain- Berkshire Highlands area began to rise and the area of the present Middlebury synclinorium began to subside. Subsidence took place largely by a series of high-angle longitudinal faults that, as a whole, step down to the west. Argillaceous sediments (the Normanskill Shale) began to inundate the former miogeosynclinal area; because the conditions of sedimentation had become similar, the sediments resembled, in facies, the synchronous Taconic rocks that were being deposited to the east. Continued rise of the Green Mountains-Berkshire Highlands area led in middle Trenton time to the decollement of the Cambrian and Ordovician sediments into the area of the present Middlebury synclinorium in a series of giant submarine slides. Sedimentation continued at the receiving site throughout the event; sedimentation may also have persisted on the moving slides. The record is found today in the turbidite-laden shale and graywacke in the upper part of the Normanskill Shale of both the allochthon and the autochthon . Restoration of the allochthonous rocks to the original site of deposition leads to correlations between rocks of the Taconic sequence and of the largely autochthonous east Vermont sequence. The lithic correlation can be carried to the level of individual formations and is confirmed by a few known ages in the east Vermont sequence. Several lines of reasoning lead to a plausible correlation of part of the Cavendish Formation of southeastern Vermont with the oldest part of the Taconic sequence. This correlation leads further to the conclusion that in this area the contacts between the Green Mountain massif and the Cavendish Formation and between the Cavendish and the overlying east Vermont sequence must both be thrust faults of large displacements. This conclusion is in fact inevitable because one of the Taconic thrust slices that extends without interruption between the latitudes corresponding to the gap in the Precambrian massifs has been shown by local structural evidence to be allochthonous; an outside original depositional site must be found for it. The present Taconic allochthon is coextensive with an area of marked negative Bouguer gravity anomaly; the Green Mountains-Berkshire massifs constitute a belt of positive anomaly. It is here proposed that these anomalies resulted from a deepseated transfer of material; subcrustal addition of material caused the rise of the Green Mountains-Berkshire Highlands area, and the concurrent subtraction of material caused subsidence in the Middlebury synclinorium area through a series of faults which were the near-surface expression of an episode of crustal collapse. If this interpretation is correct, then the regional gravity anomaly represents an uncompensated feature that has persisted since Middle Ordovician time .

Special Paper of the Geological Society of America↗
USGS2006

Reconnaissance borehole geophysical, geological, and hydrological data from the proposed hydrodynamic compartments of the Culpeper Basin in Loudoun, Prince William, Culpeper, Orange, and Fairfax Counties, Virginia

The Culpeper basin is part of a much larger system of ancient depressions or troughs, that lie inboard of the Atlantic Coastal Plain, and largely within the Applachian Piedmont Geologic Province of eastern North America, and the transition region with the neighboring Blue Ridge Geologic Province. This basin system formed during an abortive attempt to make a great ocean basin during the Late Triassic and Early Jurassic, and the eroded remnants of the basins record major episodes of sedimentation, igneous intrusion and eruption, and pervasive contact metamorphism. Altogether, some twenty nine basins formed between what is now Nova Scotia and Georgia. Many of these basins are discontinuous along their strike, and have therefore recorded isolated environments for fluvial and lacustrine sedimentation. Several basins (including the Culpeper, Gettysburg, and Newark basins) are fault-bounded on the west, and Mesozoic crustal stretching has produced assymetrical patterns of basin subsidence resulting in a progressive basin deepening to the west, and a virtual onlap relationship with the pre-basin Proterozoic rocks to the east. A result of such a pattern of basin deepening is the development of sequences of sandstones and siltstones that systemmatically increase in dip towards the accomodating western border faults. A second major structural theme in several of the major Mesozoic basins (including the Culpeper) concerns the geometry of igneous intrusion, as discussed below. Froelich (1982, 1985) and Lee and Froelich (1989) discuss the general geology of the Culpeper basin, and Smoot (1989) discusses the sedimentation environments and sedimentary facies of the Mesozoic with respect to fluvial and shallow lacustrine deposition in the Culpeper basin. Ryan and others, 2007a, b, discuss the role of diabase-induced compartmentalization in the Culpeper basin (and other Mesozoic basins), and illustrate (using alteration mineral suites within the diabase and adjacent hornfels, among other evidence) how this process has played a role in organizing the paleo- and contemporary-flow of crustal fluids at local and regional scales. Within this report, the Newark Supergroup nomenclature of Weems and Olsen (1997) is adopted.

Virginia↗
USGS2026

Postglacial ecosystem development of a hydrothermal landscape in Yellowstone National Park

The Yellowstone geo-ecosystem has been the subject of much research, but the ecological history of the Yellowstone Plateau volcanic field and its iconic geyser basins is less known. In this investigation, paleoenvironmental analyses of sediment cores from lakes in Lower Geyser Basin were compared with regional records and paleoclimate model simulations to reconstruct the vegetation, wildfire, limnology, hydrothermal dynamics, and climate drivers since deglaciation, 15,000 to 14,000 years ago. Pollen data from Lower Geyser Basin lakes reveal the strong influence of infertile rhyolitic soils on vegetation history: an initial late-glacial steppe was replaced by lodgepole pine forest from 12.8 to 11.0 ka, with little change in forest composition or cover thereafter despite changing climate. This stability contrasts with the more dynamic vegetation response on nonrhyolite substrates in the Yellowstone region where nutrient and moisture availability is greater. Highest wildfire activity and low lake nutrient levels in Lower Geyser Basin occurred from 12 to 4 ka, when summers were substantially warmer and drier and fire-inducing vapor pressure deficits were 29 to 56% higher. The hydrothermal history, inferred from sedimentary arsenic and cesium abundances, was spatially and temporally variable but lake-forming hydrothermal events align with periods of abundant moisture. Thus, long-term changes in wildfire, limnology, and, to some extent, hydrothermal activity were governed by insolation-driven climate variations, whereas the vegetation response was muted and constrained by geologic processes. These findings suggest that warmer, drier conditions in the future could result in less hydrothermal activity yet little change in forest cover across the Yellowstone Plateau volcanic field despite more wildfires.

Idaho, Montana, Wyoming↗
USGS2000

Stratigraphy, correlation, depositional setting, and geophysical characteristics of the Oligocene Snowshoe Mountain Tuff and Creede Formation in two cored boreholes

Core descriptions and geophysical logs from two boreholes (CCM-1 and CCM-2) in the Oligocene Snowshoe Mountain Tuff and Creede Formation, south-central Colorado, are used to interpret sedimentary and volcanic facies associations and their physical properties. The seven facies association include a mixed sequence of intracaldera ash-flow tuffs and breccias, alluvial and lake margin deposits, and tuffaceous lake beds. These deposits represent volcanic units related to caldera collapse and emplacement of the Snowshoe Mountain Tuff, and sediments and pyroclastic material deposited in the newly formed caldera basin, Early sedimentation is interpreted to have been rapid, and to have occurred in volcaniclastic fan environments at CCM-1 and in a variery of volcaniclastic fan, braided stream shallow lacustrine, and mudflat environments at CCM-2. After an initial period of lake-level rise, suspension settling, turbidite, and debris-flow sedimentation occurred in lacustrine slope and basin environments below wave base. Carbonate sedimentation was initially sporadic, but more continuous in the latter part of the recorded lake history (after the H fallout tuff). Sublacustrine-fan deposition occurred at CCM-1 after a pronounced lake-level fall and subsequent rise that preceded the H tuff. Variations in density, neutron, gamma-ray, sonic, and electrical properties of deposits penetrated oin the two holes reflect variations in lithology, porosity, and alteration. Trends in the geophysical properties of the lacustrine strata are linked to downhole changes in authigenic mineralology and a decrease in porosity interpreted to have resulted primarily from diagenesis. Lithological and geophysical characteristics provide a basis for correlation of the cores; however, mineralogical methods of correlation are hampered by the degree of diagenesis and alteration.

Colorado↗
USGS2014

Distinguishing seawater from geologic brine in saline coastal groundwater using radium-226; an example from the Sabkha of the UAE

Sabkhat (Salt flats) are common geographic features of low-lying marine coastal areas that develop under hyper-arid climatic conditions. They are characterized by the presence of highly concentrated saline solutions and evaporitic minerals, and have been cited in the geologic literature as present-day representations of hyper-arid regional paleohydrogeology, paleoclimatology, coastal processes, and sedimentation in the geologic record. It is therefore important that a correct understanding of the origin and development of these features be achieved. Knowledge of the source of solutes is an important first step in understanding these features. Historically, two theories have been advanced as to the main source of solutes in sabkha brines: an early concept entailing seawater as the obvious source, and a more recent and dynamic theory involving ascending geologic brine forced upward into the base of the sabkha by a regional hydraulic gradient in the underlying formations. Ra-226 could uniquely distinguish between these sources under certain circumstances, as it is typically present at elevated activity of hundreds to thousands of Bq/m 3 (Becquerels per cubic meter) in subsurface formation brines; at exceedingly low activities in open ocean and coastal water; and not significantly supplied to water from recently formed marine sedimentary framework material. The coastal marine sabkha of the Emirate of Abu Dhabi was used to test this hypothesis. The distribution of Ra-226 in 70 samples of sabkha brine (mean: 700 Bq/m 3 ), 7 samples of underlying deeper formation brine (mean: 3416 Bq/m 3 ), the estimated value of seawater (< 16 Bq/m 3 ) and an estimate of supply from sabkha sedimentary framework grains (<~6 Bq/m 3 ) provide the first direct evidence that ascending geologic brine contributes significantly to the solutes of this sabkha system.

Abu Dhabi↗