Search USGS⌕ Search

SEARCH · Search USGS

Results for “Industrial Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

665 records · Page 37Linked to original sources
USGS1963

Ground-water geology of Bexar County, Texas

The investigation in Bexar County was part of a comprehensive study of a large area in south-central Texas underlain by the Edwards and associated limestones (Comanche Peak and Georgetown) of Cretaceous age. The limestones form an aquifer which supplies water to the city of San Antonio, several military installations, many industrial plants, and many irrigated farms. The geologic formations that yield water to wells in Bexar County are sedimentary rocks of Mesozoic and Cenozoic age. The rocks strike northeastward and dip southeastward toward the Gulf of Mexico. In the northern part of the county, in an erosional remnant of the Edwards Plateau, the rocks are nearly flat and free from faulting. In the central and southern parts of the county, however, the rocks dip gulfward at gentle to moderately steep angles and are extensively faulted in the Balcones and Mexia fault zones. Individual faults or shatter zones were traced as much as 25 miles; the maximum displacement is at least 600 feet. In general, the formations are either monoclinal or slightly folded; in the western part of the county the broad Culebra anticline plunges southwestward. Most of the large-capacity wells in Bexar County draw water from the Edwards and associated limestones, but a few draw from the Glen Rose limestone, the Austin chalk, and surficial sand and gravel. The Hosston formation, Glen Rose limestone, Buda limestone, and Austin chalk, all of Cretaceous age, generally yield small to large supplies of water; the Wilcox group and Carrizo sand of Tertiary age yield moderate supplies and alluvium of Pleistocene and Recent age generally yield small supplies. The Edwards and associated limestones are recharged primarily by groundwater underflow into Bexar County from the west, and secondarily by seepage from streams that cross the outcrop of the aquifer in Bexar County. During the period 1934-47 the recharge to the aquifer in Bexar County is estimated to have averaged between 400,000 and 430,000 acre-feet per year. Discharge from the aquifer takes place by means of wells and springs and by underflow into Comal and Guadalupe Counties on the northeast. During the period 1934-47 the estimated average discharge from wells and springs was about 174,000 acre-feet per year. The discharge by underflow out of the county during the same period is estimated to have averaged between 220,000 and 260,000 acre-feet per year. Probably only a small amount of water moves downdip southeast of San Antonio. The presence of highly mineralized water in that area suggests that the circulation of water is poor because of the low permeability of the aquifer. During the period 1934-56 the discharge from the Edwards and associated limestones greatly exceeded the recharge; consequently, water levels in wells declined. The decline was greatest in the northwestern part of the county, where the water levels in wells dropped as much as 100 feet. The decline was progressively less toward the east, averaging 40 feet along the Bexar-Comal County line. The area of the greatest concentration of discharge, which includes San Antonio and extends to the southwest and northeast, coincides with the area of maximum faulting and maximum recorded yields from wells and is not the area of greatest decline. The ability of the Edwards and associated limestones to transmit and store water in the San Antonio area apparently is so great that the discharge from wells results in much smaller declines of water level than do similar or even smaller discharges in other areas. The water from the Edwards is almost uniformly a calcium bicarbonate water of good quality, although hard. In the southern part of the San Antonio area the water is charged with hydrogen sulfide; farther downdip it becomes highly mineralized.

Water Supply Paper↗
USGS2012

Occurrence of anthropogenic organic compounds and nutrients in source and finished water in the Sioux Falls area, South Dakota, 2009-10

Anthropogenic organic compounds (AOCs) in drinking-water sources commonly are derived from municipal, agricultural, and industrial wastewater sources, and are a concern for water-supply managers. A cooperative study between the city of Sioux Falls, S. Dak., and the U.S. Geological Survey was initiated in 2009 to (1) characterize the occurrence of anthropogenic organic compounds in the source waters (groundwater and surface water) to water supplies in the Sioux Falls area, (2) determine if the compounds detected in the source waters also are present in the finished water, and (3) identify probable sources of nitrate in the Big Sioux River Basin and determine if sources change seasonally or under different hydrologic conditions. This report presents analytical results of water-quality samples collected from source waters and finished waters in the Sioux Falls area. The study approach included the collection of water samples from source and finished waters in the Sioux Falls area for the analyses of AOCs, nutrients, and nitrogen and oxygen isotopes in nitrate. Water-quality constituents monitored in this study were chosen to represent a variety of the contaminants known or suspected to occur within the Big Sioux River Basin, including pesticides, pharmaceuticals, sterols, household and industrial products, polycyclic aromatic hydrocarbons, antibiotics, and hormones. A total of 184 AOCs were monitored, of which 40 AOCs had relevant human-health benchmarks. During 11 sampling visits, 45 AOCs (24 percent) were detected in at least one sample of source or finished water, and 13 AOCs were detected in at least 20 percent of all samples. Concentrations of detected AOCs were all less than 1 microgram per liter, except for two AOCs in multiple samples from the Big Sioux River, and one AOC in finished-water samples. Concentrations of AOCs were less than 0.1 microgram per liter in more than 75 percent of the detections. Nutrient concentrations varied seasonally in source-water samples from surface water and groundwater. In the Big Sioux River, nitrite plus nitrate concentrations were typically less than 1 milligram per liter as nitrogen, and reached a maximum of 4.06 milligrams per liter as nitrogen following a June 2010 storm. Nitrite plus nitrate concentrations in groundwater ranged from less than 0.1 to 0.701 milligram per liter as nitrogen. Eight of the AOCs detected have a human-health benchmark that could be used to evaluate the concentrations in a human-health context. Four AOCs had maximum concentrations within an order of magnitude of the benchmark, indicating that additional monitoring of the compound may be warranted. Three herbicides (atrazine, metolachlor, and prometon) and one degradate (deethylatrazine) were detected in finished-water samples as frequently as in source-water samples. The concentrations of herbicides in source water varied by an order of magnitude from the period of peak use (early summer) to the winter months. Groundwater and finished-water concentrations of atrazine were similar for the six sampling dates when groundwater was the only source water used. Upstream wastewater discharges contributed a fairly small percentage of the flow to the Big Sioux River near Sioux Falls, but several AOCs associated with wastewater were frequently detected. The interpretation of all potential sources of nitrogen cannot be accomplished by use of nitrogen and oxygen isotopes in nitrate alone, but provides a qualitative indication that very little nitrate originates from excess fertilizer runoff, and most nitrate originates from municipal wastewater effluent, manure runoff (either from field application or feeding operations), or fertilizers mineralized by processes in the soil.

South Dakota↗
USGS1998

Water-quality assessment of part of the upper Mississippi River basin, Minnesota and Wisconsin— Ground-water quality in an urban part of the Twin Cities Metropolitan area, Minnesota, 1996

In the spring of 1996, the Upper Mississippi River Basin Study Unit of the National Water-Quality Assessment Program drilled 30 shallow monitoring wells in a study area characterized by urban residential and commercial land uses. The monitoring wells were installed in sandy river-terrace deposits adjacent to the Mississippi River in Anoka and Hennepin Counties, Minnesota, in areas where urban development primarily occurred during the past 30 years. Analyses of sediments collected during well drilling indicated that at most well sites the aquifer materials had relatively high hydraulic conductivities (ranging from 0.01 to 238 feet per day), and relatively low organic carbon contents (0.10 to 41 grams per kilogram), indicating a high susceptibility to leaching of fertilizers and organic substances used on the land surface. Sediment pH values, which can affect leaching of pesticides, were generally alkaline, ranging from 5.1 to 9.6. Ground-water levels ranged from 2.39 to 23.14 feet below land surface, and indicated that shallow ground water flows primarily toward the Mississippi River. Dissolved-oxygen concentrations in water samples from the wells were generally less than 3 milligrams per liter (mg/L) and specific conductances were generally greater than 600 microsiemens per centimeter. Calcium, magnesium, sodium, bicarbonate, chloride, and sulfate were the primary dissolved constituents in the water samples. Sodium and chloride concentrations were generally greater than commonly reported in the region, probably due to leaching of sodium chloride applied to roads during the winter. Most tracemetal concentrations in ground-water samples were less than 10 micrograms per liter (μg/L), but concentrations of iron and manganese commonly exceeded Secondary Maximum Contaminant Levels set by the U.S. Environmental Protection Agency of 300 and 50 μg/L, respectively. Mineral saturation indices indicated that calcite, dolomite, and gypsum were slightly undersaturated in most water samples, and that quartz, and many oxides and hydroxides of iron and manganese were oversaturated in all of the water samples. Concentrations of nitrate nitrogen, the primary nutrient of concern in ground water, ranged from less than 0.05 to 16 mg/L, with a median concentration of 1.4 mg/L. Dissolved phosphorus concentrations ranged from less than 0.01 to 1.5 mg/L in the water samples, with a median concentration of 0.02 mg/L. Water from one well was oversaturated with respect to hydroxyapatite, a phosphatic mineral used as a fertilizer. Pesticide compounds were detected in water samples from 16 wells, but concentrations of those compounds were less than 1.0 μg/L. Prometon, an herbicide commonly used for right-of-way weed control, was detected in water samples from 10 of the wells. Atrazine, and its metabolite deethylatrazine, were detectable in water samples from 6 and 8 wells, respectively. Atrazine is commonly applied to land planted with corn and is detectable in rainfall and air samples in concentrations of less than 1 ng/L in the urban land use study area. Other detected pesticide compounds, which are used in agriculture, right-of-way weed control, or lawn care included: tebuthiuron, EPTC, p , p '-DDE, metolachlor, simazine, bentazon, and bromacil. Volatile organic compounds were detected in water samples from 26 wells, but the concentrations of most of those compounds were less than 1 μg/L. Carbon disulfide, which may be produced by bacteria in soils, was the most commonly detected volatile organic compound in water samples from the wells. Other detected volatile organic compounds included: methyl chloride, acetone, dichlorofluoromethane, tetrahydrofuran, trichlorofluoromethane, methyl iodide, 1,1-dichloroethane, chloroform, toluene, trichloroethane, trichloroethene, cis -1,2-dichloroethene, methylene chloride, bromodichloromethane, benzene, methylisobutylketone, ethyl ether, and tetrachloroethene. Tritium concentrations, analyzed in water samples from 15 of the 30 wells, indicated that shallow ground water has been recharged since the mid-1950's, and that shallow ground water should be affected by urban development that has taken place over the past 40 years. Land uses in the urban land use study area affected the concentrations of some water-quality constituents. Concentrations of nitrate and chloride, and frequencies of detection of pesticides and of volatile organic compounds, were greater in water samples from the surficial sand and gravel aquifer underlying the urban land use study area than in water samples from similar aquifers from part of the Upper Mississippi River Basin National Water-Quality Assessment study unit. Land uses within 500-meter radii of each well were quantified by digitizing overlays of aerial photographs that were verified and updated in the field. Concentrations of magnesium and sulfate were greater in ground water beneath areas of denser residential development, which may be a natural artifact of better drainage and a deeper water table in those areas. Frequencies of detection of some pesticides and volatile organic compounds were greater in water from wells with greater proportions of industrial and transportation land uses. Ground water in areas with less dense residential development, mostly the more recently-developed areas, tended to have greater concentrations of agricultural herbicides and some nutrients probably a relict of previous agricultural land use.

Minnesota↗
USGS1973

Ground water in the Eugene-Springfield area, southern Willamette Valley, Oregon

The cities of Eugene and Springfield and their outlying suburban and rural districts constitute an area of rapid population growth where progressively greater volumes of ground water are being required for irrigation and industrial and public supplies. The area is also one of diverse geologic and hydrologic conditions. As used in this report, the Eugene-Springfield area covers about 450 square miles and includes a part of the lower foothills of the Coast and Cascade Ranges and a strip of the main valley plain of the southern Willamette Valley. Volcanic and sedimentary rock units exposed in the foothills range in age from Eocene to Miocene. In the main valley plain the older units are overlain by Pleistocene and Holocene alluvial deposits. Marine-deposited sandstone, siltstone, shale, and mudstone of the older sedimentary units are fine grained and poorly permeable and yield water slowly to wells. The volcanic rocks, primarily of dacitic and andesitic composition, yield small quantities of water that are generally adequate only for domestic use. The alluvial deposits (sand and gravel) of the valley plain (central lowland) contain the most productive aquifers in the area and are considered to be the only ground-water reservoir for which large-scale development of ground-water supplies is feasible. Aquifers in the area are recharged principally by direct infiltration of precipitation. Most of the precipitation, which averages about 4C inches per year, occurs during late autumn and winter. Minimum recharge by infiltration of precipitation to the alluvial aquifers beneath the valley plain is estimated to be about 100,000 acre-feet. Ground water is discharged naturally from the central lowland by seepage and spring flow to small streams, by subsurface outflow to adjacent areas, and by evapotranspiration. Storage capacity of the central lowland in the Eugene-Springfield area is estimated to be about 2.1 million acre-feet in the zone 10-150 feet below land surface. The quantity of ground water available annually from this area is far greater than the 23,000 acre-feet pumped for all uses in 1968. This pumpage was about 23 percent of the perennial yield (100,000 acre-ft), and about 77,000 acre-feet of water was left available for additional withdrawal. If annual withdrawals of water were increased to 100,000 acre-feet per year, the levels in the ground-water reservoir would be lowered. Once new equilibriums are established, increased withdrawals could be accommodated without progressive losses in aquifer storage or excessive losses in flow of the larger streams. Ground water from the alluvial deposits of the valley plain is chemically suitable for irrigation and other uses, as is most of the water obtained from perched-water bodies in the sedimentary and volcanic rocks. However, the mineral content of water from the older sedimentary rocks, particularly from deeper producing zones, is greater than the mineral content of water from the alluvial deposits. Locally, some of the water from the older rocks is too saline for most uses. Increased use of ground water may result in certain problems pertaining to waste-disposal practices, local overdraft of aquifers, well interference, and well construction. Present data are adequate to evaluate some of the factors relating to foreseeable problems but allow only tentative conclusions to be drawn about other factors, which include local direction of flow, rate of ground-water movement, and areas of possible ground-water contamination. Additional information obtained through systematic study will be needed to deal with these problems.

Oregon↗
USGS2004

Vertical gradients in water chemistry and age in the southern High Plains Aquifer, Texas, 2002

The southern High Plains aquifer is the primary source of water used for domestic, industrial, and irrigation purposes in parts of New Mexico and Texas. Despite the aquifer's importance to the overall economy of the southern High Plains, fundamental ground-water characteristics, such as vertical gradients in water chemistry and age, remain poorly defined. As part of the U.S. Geological Survey's National Water-Quality Assessment Program, water samples from nested, short-screen monitoring wells installed in the southern High Plains aquifer at two locations (Castro and Hale Counties, Texas) were analyzed for field parameters, major ions, nutrients, trace elements, dissolved organic carbon, pesticides, stable and radioactive isotopes, and dissolved gases to evaluate vertical gradients in water chemistry and age in the aquifer. Tritium measurements indicate that recent (post-1953) recharge was present near the water table and that deeper water was recharged before 1953. Concentrations of dissolved oxygen were largest (2.6 to 5.6 milligrams per liter) at the water table and decreased with depth below the water table. The smallest concentrations were less than 0.5 milligram per liter. The largest major-ion concentrations generally were detected at the water table because of the effects of overlying agricultural activities, as indicated by postbomb tritium concentrations and elevated nitrate and pesticide concentrations at the water table. Below the zone of agricultural influence, major-ion concentrations exhibited small increases with depth and distance along flow paths because of rock/water interactions and mixing with water from the underlying aquifer in rocks of Cretaceous age. The concentration increases primarily were accounted for by dissolved sodium, bicarbonate, chloride, and sulfate. Nitrite plus nitrate concentrations at the water table were 2.0 to 6.1 milligrams per liter as nitrogen, and concentrations substantially decreased with depth in the aquifer to a maximum concentration of 0.55 milligram per liter as nitrogen. Dissolved-gas and nitrogen-isotope data from the deep wells in Castro County indicate that denitrification occurred in the aquifer, removing 74 to more than 97 percent of the nitrate originally present in recharge. There was no evidence of denitrification in the deep part of the aquifer in Hale County. After correcting for denitrification effects, the background concentration of nitrate in water recharged before 1953 ranged from 0.4 to 3.2 milligrams per liter as nitrogen, with an average of 1.6 milligrams per liter as nitrogen. The d15N composition of background nitrate at the time of recharge was estimated to range from 9.6 to 12.3 per mil. Mass-balance models indicate that the decreases in dissolved oxygen and nitrate concentrations and small increases in major-ion concentrations along flow paths can be accounted for by small amounts of silicate-mineral and calcite dissolution; SiO2, goethite, and clay-mineral precipitation; organic-carbon and pyrite oxidation; denitrification; and cation exchange. Mass-balance models for some wells also required mixing with water from the underlying aquifer in rocks of Cretaceous age to achieve mole and isotope balances. Carbon mass transfers identified in the models were used to adjust radiocarbon ages of water samples recharged before 1953. Adjusted radiocarbon ages ranged from less than 1,000 to 9,000 carbon-14 years before present. Radiocarbon ages were more sensitive to uncertainties in the carbon-14 content of recharge than uncertainties in carbon mass transfers, leading to 1-sigma uncertainties of about ?2,000 years in the adjusted ages. Despite these relatively large uncertainties in adjusted radiocarbon ages, it appears that deep water in the aquifer was considerably older (at least 1,000 years) than water near the water table. There was essentially no change in ground-water age with depth in deeper parts of the aquifer, indicating that water in that

Texas↗
USGS1932

Ground water supplies of the Camden area, New Jersey

This report is one of several setting forth the results of investigations as to the safe yield of the principal water-bearing formations in certain parts of New Jersey, carried on cooperatively by the New Jersey Department of Conservation and Development and the United States Geological Survey. Other areas in which similar studies have been made are the Atlantic City area; the Asbury Park area; the Runyon area, including the Perth Amboy well field; the area embracing the well fields of the Commonwealth-Water Co., the East Orange Water Department, and other municipalities near the Passaic River in the vicinity of Chatham; and the Garfield Water Department well field and those of several industries in the vicinity of East Paterson. The results of the study in the Camden area are of value for several reasons. The greater part of the water supply of Camden comes from wells in three fields with an estimated capacity of about 30 million gallons a day, distribute1 over a triangular area of less than one square mile. This is one of the largest developments of ground water in so small an area in the United States. During the investigation a number of new wells were drilled in this area, and the type of wells and methods of pumping were changed, and observations were possible that otherwise could seldom be obtained under such favorable circumstances. As a result of the building of the new bridge across the Delaware River between Philadelphia and Camden there has been a considerable increase in population and in consumption of water in the Camden area, and this investigation is valuable in showing the extent to which further development of ground water is possible. The observations on which the report is based were made in the period from July 1, 1923, to the date of writing the report, in the early part of 1928.1 The continuing observations have been confined essentially to the well fields of the Camden Water Department. Certain data in regard to other well fields within a radius of 10 miles of Camden, collected by F. Clark Rule under the direction of the writer in the summer of 1923, and other data obtained from the files of the Department of Conservation and Development are also included in so far as they bear on the problems under consideration. The City of Camden has cooperated heartily through C. P. Sherwood, formerly director of the Department of Streets and Public Improvements, his successor, W. D. Sayrs, Jr., James H. Long, maintenance engineer of the Water Department, and David B. Owen, chief engineer of the Morris pumping station. Much valuable information has been furnished by the Layne-New York Co., which, during the period of the investigation, replaced nearly all the old-type wells of the Camden system with those of the most modern type. The investigation was under the immediate supervision of H. T. Critchlow, then chief of the Division of Waters of the Department of Conservation and Development, and O.E. Meinzer, geologist in charge of the Division of Ground Water of the United States Geological Survey. The late Dr. M. W. Twitchell, assistant State geologist, was consulted on phases relating to the stratigraphy. A number of analyses of water have been made by C. S. Howard, of the United States Geological Survey, and advice in regard to problems arising from the mineral character of the water has been given by W. D. Collins, chemist in charge of the Division of Quality of Water of the same organization. Thanks are also due to those of the other water departments and private well owners in the area who have furnished information.

New Jersey↗
USGS1970

Study and interpretation of the chemical characteristics of natural water

The chemical composition of natural water is derived from many different sources of solutes, including gases and aerosols from the atmosphere, weathering and erosion of rocks and soil, solution or precipitation reactions occurring below the land surface, and cultural effects resulting from activities of man. Some of the processes of solution or precipitation of minerals can be closely evaluated by means of principles of chemical equilibrium including the law of mass action and the Nernst equation. Other processes are irreversible and require consideration of reaction mechanisms and rates. The chemical composition of the crustal rocks of the earth and the composition of the ocean and the atmosphere are significant in evaluating sources of solutes in natural fresh water. The ways in which solutes are taken up or precipitated and the amounts present in solution are influenced by many environmental factors, especially climate, structure and position: of rock strata, and biochemical effects associated with life cycles of plants and animals, both microscopic and macroscopic. Taken all together and in application with the further influence of the general circulation of all water in the hydrologic cycle, the chemical principles and environmental factors form a basis for the developing science of natural-water chemistry. Fundamental data used in the determination of water quality are obtained by the chemical analysis of water samples in the laboratory or onsite sensing of chemical properties in the field. Sampling is complicated by changes in composition of moving water and the effects of particulate suspended material. Most of the constituents determined are reported in gravimetric units, usually milligrams per liter or milliequivalents per liter. More than 60 constituents and properties are included in water analyses frequently enough to provide a basis for consideration of the sources from which each is generally derived, most probable forms of elements and ions in solution, solubility controls, expected concentration ranges and other chemical factors. Concentrations of elements that are commonly present in amounts less than a few tens of micrograms per liter cannot always be easily explained, but present information suggests many are controlled by solubility of hydroxide or carbonate or by sorption on solid particles. Chemical analyses may be grouped and statistically evaluated by averages, frequency distributions, or ion correlations to summarize large volumes of data. Graphing of analyses or of groups of analyses aids in showing chemical relationships among waters, probable sources of solutes, areal water-quality regimen, and water-resources evaluation. Graphs may show water type based on chemical composition, relationships among ions, or groups of ions in individual waters or many waters considered simultaneously. The relationships of water quality to hydrologic parameters, such as stream discharge rate or ground-water flow patterns, can be shown by mathematical equations, graphs, and maps. About 75 water analyses selected from the literature are tabulated to illustrate the relationships described, and some of these, along with many others that are not tabulated, are also utilized in demonstrating graphing and mapping techniques. Relationships of water composition to source rock type are illustrated by graphs of some of the tabulated analyses. Activities of man may modify water composition extensively through direct effects of pollution and indirect results of water development, such as intrusion of sea water in ground-water aquifiers. Water-quality standards for domestic, agricultural, and industrial use have been published by various agencies. Irrigation project requirements for water quality are particularly intricate. Fundamental knowledge of processes that control natural water composition is required for rational management of water quality.

Water Supply Paper↗
USGS1959

Study and interpretation of the chemical characteristics of natural water

The chemical composition of natural water is derived from many different sources of solutes, including gases and aerosols from the atmosphere, weathering and erosion of rocks and soil, solution or precipitation reactions occurring below the land surface, and cultural effects resulting from activities of man. Some of the processes of solution or precipitation of minerals can be closely evaluated by means of principles of chemical equilibrium including the law of mass action and the Nernst equation. Other processes are irreversible and require consideration of reaction mechanisms and rates. The chemical composition of the crustal rocks of the earth and the composition of the ocean and the atmosphere are significant in evaluating sources of solutes in natural fresh water. The ways in which solutes are taken up or precipitated and the amounts present in solution are influenced by many environmental factors, especially climate, structure and position: of rock strata, and biochemical effects associated with life cycles of plants and animals, both microscopic and macroscopic. Taken all together and in application with the further influence of the general circulation of all water in the hydrologic cycle, the chemical principles and environmental factors form a basis for the developing science of natural-water chemistry. Fundamental data used in the determination of water quality are obtained by the chemical analysis of water samples in the laboratory or onsite sensing of chemical properties in the field. Sampling is complicated by changes in composition of moving water and the effects of particulate suspended material. Most of the constituents determined are reported in gravimetric units, usually milligrams per liter or milliequivalents per liter. More than 60 constituents and properties are included in water analyses frequently enough to provide a basis for consideration of the sources from which each is generally derived, most probable forms of elements and ions in solution, solubility controls, expected concentration ranges and other chemical factors. Concentrations of elements that are commonly present in amounts less than a few tens of micrograms per liter cannot always be easily explained, but present information suggests many are controlled by solubility of hydroxide or carbonate or by sorption on solid particles. Chemical analyses may be grouped and statistically evaluated by averages, frequency distributions, or ion correlations to summarize large volumes of data. Graphing of analyses or of groups of analyses aids in showing chemical relationships among waters, probable sources of solutes, areal water-quality regimen, and water-resources evaluation. Graphs may show water type based on chemical composition, relationships among ions, or groups of ions in individual waters or many waters considered simultaneously. The relationships of water quality to hydrologic parameters, such as stream discharge rate or ground-water flow patterns, can be shown by mathematical equations, graphs, and maps. About 75 water analyses selected from the literature are tabulated to illustrate the relationships described, and some of these, along with many others that are not tabulated, are also utilized in demonstrating graphing and mapping techniques. Relationships of water composition to source rock type are illustrated by graphs of some of the tabulated analyses. Activities of man may modify water composition extensively through direct effects of pollution and indirect results of water development, such as intrusion of sea water in ground-water aquifiers. Water-quality standards for domestic, agricultural, and industrial use have been published by various agencies. Irrigation project requirements for water quality are particularly intricate. Fundamental knowledge of processes that control natural water composition is required for rational management of water quality.

Water Supply Paper↗
USGS1985

Study and interpretation of the chemical characteristics of natural water

The chemical composition of natural water is derived from many different sources of solutes, including gases and aerosols from the atmosphere, weathering and erosion of rocks and soil, solution or precipitation reactions occurring below the land surface, and cultural effects resulting from human activities. Broad interrelationships among these processes and their effects can be discerned by application of principles of chemical thermodynamics. Some of the processes of solution or precipitation of minerals can be closely evaluated by means of principles of chemical equilibrium, including the law of mass action and the Nernst equation. Other processes are irreversible and require consideration of reaction mechanisms and rates. The chemical composition of the crustal rocks of the Earth and the composition of the ocean and the atmosphere are significant in evaluating sources of solutes in natural freshwater. The ways in which solutes are taken up or precipitated and the amounts present in solution are influenced by many environmental factors, especially climate, structure and position of rock strata, and biochemical effects associated with life cycles of plants and animals, both microscopic and macroscopic. Taken together and in application with the further influence of the general circulation of all water in the hydrologic cycle, the chemical principles and environmental factors form a basis for the developing science of natural-water chemistry. Fundamental data used in the determination of water quality are obtained by the chemical analysis of water samples in the laboratory or onsite sensing of chemical properties in the field. Sampling is complicated by changes in the composition of moving water and by the effects of particulate suspended material. Some constituents are unstable and require onsite determination or sample preservation. Most of the constituents determined are reported in gravimetric units, usually milligrams per liter or milliequivalents per liter. More than 60 constituents and properties are included in water analyses frequently enough to provide a basis for consideration of the sources from which each is generally derived, the most probable forms of elements and ions in solution, solubilitycontrols, expected concentration ranges, and other chemical factors. Mechanisms that control concentrations of elements commonly present in amounts less than a few tens of micrograms per liter cannot always be easily ascertained, but present information suggests that many are controlled by solubility of their hydroxides or carbonates or by sorption on solid particles. Many dissolved organic compounds can now be specifically determined. Chemical analyses may be grouped and statistically evaluated by means, medians, frequency distributions, or ion correlations to summarize large volumes of data. Graphing of analyses or of groups of analyses aids in showing chemical relationships among water, probable sources of solutes, areal water-quality regimen, temporal and spatial variation, and water-resources evaluation. Graphs may show water type based on chemical composition, relationships among ions, or groups of ions in individual waters or many waters considered simultaneously. The relationships of water quality to hydrogeologic characteristics, such as stream discharge rate or ground-water flow patterns, can be shown by mathematical equations, graphs, and maps. About 80 water analyses selected from the literature are tabulated to illustrate the relationships described, and some of these, along with many others that are not tabulated, are also used in demonstrating graphing and mapping techniques. Relationships of water composition to source rock type are illustrated by graphs of some of the tabulated analyses. Human activities may modify water composition extensively through direct effects of pollution and indirect results of water development, such as intrusion of seawater in groundwater aquifers. Water-quality standards for domestic, agricultural, and industrial use have been published by various agencies. Irrigation project requirements for water quality are particularly intricate. Fundamental knowledge of processes that control natural-water composition is required for rational management of water quality.

Water Supply Paper↗
USGS2004

Chapter 21 Western phosphate field - Depositional and economic deposit models

The Western Phosphate Field (WPF), composed of Permian marine sedimentary strata that cover over 300,000 km 2 in the middle Rocky Mountains of Idaho, Montana, Utah, and Wyoming in the United States, contains vast resources of phosphate mined for fertilizer and a range of other industrial applications. The richest deposits of phosphate in the WPF occur in the Meade Peak Phosphatic Shale Member of the Phosphoria Formation in southeast Idaho. Phosphate is an essential and even limiting nutrient of algal production, which occurs at the bottom of the marine food web in the oceanic photic zone. The high concentrations of phosphate and trace elements in the Phosphoria Formation reflect a low accumulation rate of diluting phases, such as terrigenous siliciclastic debris and carbonate, rather than an unusually high level of primary productivity at the time of deposition. Indeed, the mean rate of accumulation of PO 4 3 required a continuous flux of PO 4 3 into the basin and the photic zone of the water column, but only at a moderate level. This flux was maintained by upwelling of nutrient-rich seawater, imported at depth from the open ocean. Although only a fraction of the organic matter that hosted the PO 4 3 and other nutrients (NO 3 , Cd, Cu, Mo, Ni, and Zn) actually escaped oxidation in the water column, their rate of accu- mulation on the sea floor defined the basin hydrography. Rates of accumulation of Cr, U, V, and rare-earth elements by precipitation and adsorp- tion reactions identify redox conditions in the bottom water as having been denitrifying, maintained by a balance between the rate of oxidation of organic matter settling through the water column and the flux of open-ocean seawater at depth. Atmospheric mixing maintained oxygen respiration in the uppermost several tens of meters of the water column. This hydrography and seawater chemistry are present in several sedimentary envi- ronments in the ocean today. In the WPF, there is an estimated surface mineable reserve base and subeconomic resource of 7.6 billion mt, at an average grade of 24% P 2 O 5 ; a subeconomic underground- mineable resource of 17 billion mt, at a grade of 28%; and 507 billion mt of subresource- grade phosphatic material that underlie the WPF at a depth greater than 305 m. The relationship between phosphate-ore specifications and weathering suggests that significant changes in processing, with associated cost increases, will be required to extend recovery of ore below the relatively strongly weathered zone near the surface. Four open pit mines currently extract phosphate from two moderately to steeply dipping ore zones that typically contain between 20% and 35% P 2 O 5 . Although the shales are enriched in trace elements, especially As, Cd, Cr, Cu, Mo, Se, U, V, Zn, and rare-earth elements, the relative concentration of organic carbon and selected major element oxides determines the suitability of phosphate-rich rock for feed to processing plants and its other applications. Selected specifications from the four operating mines include the following: minimum P 2 O 5 of 18-20% and average of 26-27%; maximum A1 2 O 3 of 1.6-5.0%; maximum MgO of 0.3-0.6%; a CaO/P 2 O 5 ratio of 1.5-1.6; and total carbon content of 4%-5%. Weathering to a depth of as much as 100 m significantly enhances ore quality by decreasing the proportions of calcite, dolomite, and organic matter relative to carbonate fluorapatite, the primary ore mineral

Colorado, Idaho, Montana, Nebraska, North Dakota, ↗
USGS1954

Ground water resources of southeastern Oakland County, Michigan

The area covered by this report comprises a square which measures three townships on a side and enclose 318 square miles in southeastern Oakland County. The investigation of the ground-water resources of this area was made by the U.S. Geological Survey in cooperation with the Detroit Metropolitan Area Regional Planning Commission, the Michigan Department of Conservation, and the Michigan Water Resources Commission. In 1950 the population of this nine-township area exceeded 341,000, or more than 86 percent of the total population of Oakland County. This county ranks third in the state in number of industrial establishments and workers and is fifteenth in agricultural importance. Its numerous lakes and rolling uplands contribute to its top rank in the state in the number of recreational enterprises in rural or suburban areas. The climate is moderately humid. The average annual precipitation is 30 inches and the mean air temperature is 47.2° F. Snowfall averages 38 inches in the November-April interval. The growing season averages 151 days. The regional land surface slopes from northwest to southeast and has a total relief of 360 feet. Pitted outwash plains and morainal hills that are more than 1,000 feet above sea level in the northwest corner of the area give way southeastward to a sequence of terminal moraines and intervening till plains in the middle part. These give way to the broad lake plains that cover the southeastern third of the area. The area lies on the southeast edge of the Michigan Basin and the bedrock is composed of northwest dipping strata of the Devonian and Mississippian systems. The Antrim shale, of Lake Devonian and early Mississippian age, is the oldest formation cropping out beneath the mantle of glacial Berea sandstone, and Sunbury shale overlie the Antrim and are overlain by the Coldwater shale, their areas of outcrop beneath the drift lying successively farther northwest. These formations are of early Mississippian age. Throughout the area the bedrock is covered by glacial drift which ranges in thickness from 25 to more than 350 feet. The drift increases in thickness from southeast to northwest, but considerable relief on the underlying bedrock surface greatly modifies this trend. Extensive moraines, till plains, lake plains, and gravel outwash plains cover the area. In the northwestern third of the area an extensive upland of gravel plains is dotted with lakes ranging from a few feet to more than 100 feet in depth. Precipitation is the perennial source of all water in this area, whether on the surface of underground. The average annual rainfall on the nine-townships is equivalent to a continuous supply of 450 m.g.d. or 9 times the combined annual withdrawal from all wells in the area. About 53 percent of the area is drained by the Clinton River, 44 percent by the River Rouge, and the remaining 3 percent by the Huron River. Less than one-third of the annual precipitation reappears as surface discharge from the watersheds of this area. About two-thirds of the annual precipitation on the area is lost by evaporation from water and land surfaces and by transpirations from vegetative cover. A substantial part of this large annual water loss is from the many lakes and other exposed water surfaces and from contiguous lands where the depth to the water table is slight. Average annual water losses by evapotranspiration are equivalent to about 280 m.g.d. or nearly 6 times the combined withdrawal from all ground-water supplies in the area. The principal aquifers are the alluvial deposits bordering streams and the buried outwash deposits which represent alluvial fills in preglacial or interglacial stream channels. Intensive well developments in the urban areas have greatly lowered ground-water levels in the buried outwash deposits, have brought localized problems of declining well yield, and have induced migration of mineralized waters from the underlying consolidated formations. During 1952, withdrawals of ground water in the nine township area averages about 50 m.g.d., most of this quantity being pumped from municipal wells. This annual pumpage was distributed as follows: 60 percent in Pontiac and environs; 20 percent in Birmingham, Royal Oak and Troy Township; and the remaining 20 percent throughout the suburban and rural areas.

Michigan↗
USGS2013

Knowledge and understanding of dissolved solids in the Rio Grande–San Acacia, New Mexico, to Fort Quitman, Texas, and plan for future studies and monitoring

Availability of water in the Rio Grande Basin has long been a primary concern for water-resource managers. The transport and delivery of water in the basin have been engineered by using reservoirs, irrigation canals and drains, and transmountain-water diversions to meet the agricultural, residential, and industrial demand. In contrast, despite the widespread recognition of critical water-quality problems, there have been minimal management efforts to improve water quality in the Rio Grande. Of greatest concern is salinization (concentration of dissolved solids approaching 1,000 mg/L), a water-quality problem that has been recognized and researched for more than 100 years because of the potential to limit both agricultural and municipal use. To address the issue of salinization, water-resource managers need to have a clear conceptual understanding of the sources of salinity and the factors that control storage and transport, identify critical knowledge gaps in this conceptual understanding, and develop a research plan to address these gaps and develop a salinity management program. In 2009, the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers (USACE), New Mexico Interstate Stream Commission (NMISC), and New Mexico Environment Department (NMED) initiated a project to summarize the current state of knowledge regarding the transport of dissolved solids in the Rio Grande between San Acacia, New Mexico, and Fort Quitman, Texas. The primary objective is to provide hydrologic information pertaining to the spatial and temporal variability present in the concentrations and loads of dissolved solids in the Rio Grande, the source-specific budget for the mass of dissolved solids transported along the Rio Grande, and the locations at which dissolved solids enter the Rio Grande. Dissolved-solids concentration data provide a good indicator of the general quality of surface water and provide information on the factors governing salinization within the Rio Grande study area. The pattern in dissolved-solids concentrations along the Rio Grande is one of increasing concentration with increasing distance downstream from Elephant Butte and Caballo Reservoirs. The concentration of dissolved solids in the Rio Grande doubles (approximately 500 to 1,000 mg/L) from below Elephant Butte Reservoir to El Paso and increases by more than a factor of 5 (approximately 500 to 3,200 mg/L) from below Elephant Butte Reservoir to Fort Quitman. Marked increases in the concentration of dissolved solids commonly coincide with contributions from agricultural drains, wastewater-treatment plants, regional groundwater, and upward-flowing saline groundwater. The greatest factor, from the surface-water system, in controlling dissolved solids in the Rio Grande is the amount of water that is being transported or stored. Annual variation in streamflow is influenced primarily by climate (precipitation and evaporation) and management of Elephant Butte and Caballo Reservoirs (water storage and release cycles). Seasonal variation in streamflow within the Rio Grande study area is generally categorized generally as irrigation (March–September) and nonirrigation (October–February) seasons; with streamflow in the Rio Grande is highest during the irrigation season and lowest during the nonirrigation season. Dissolved-solids loads during the irrigation season decrease between Leasburg and Fort Quitman primarily because of irrigation diversions and losses to the underlying alluvial aquifer. Conversely, dissolved-solids loads during the nonirrigation season increase between Caballo Dam and Fort Quitman primarily because of the inflow of dissolved solids from agricultural drains, wastewater-treatment plants, and groundwater with elevated concentrations of dissolved solids. Many studies have mass-balance budgets that account for the mass of dissolved solids transported along the Rio Grande. Results from mass-balance budgets developed for dissolved solids indicated that (1) the inflow of saline groundwater, inflow of regional groundwater, and chemical reactions between mineral phases are the primary sources controlling dissolved solids in the Rio Grande, and (2) groundwater pumping and mineral precipitation are causing a net storage of dissolved solids in the Leasburg to El Paso and El Paso to Fort Quitman reaches of the Rio Grande. Looking forward, multiple water-resource managers from State and local agencies in New Mexico and Texas and Federal agencies formed the Rio Grande Salinity Management Coalition with the goal to reduce the amount of dissolved solids that are transported and stored in the Rio Grande study area. The recommendations for additional monitoring to assist the coalition are as follows: -Monitoring: Couple water-quality and streamflow monitoring in the Rio Grande and agricultural drains; perform groundwater-seepage investigations in the Rio Grande and major agricultural drains; nonitor groundwater water-quality conditions in the Mesilla and Hueco Basins. -Focused Hydrogeology Studies at Inflow Sources: Map dissolved-solids concentrations in the Rio Grande and underlying alluvial aquifer; perform hydrogeologic characterization of subsurface areas containing unusually high concentrations of dissolved solids. -Modeling of Dissolved Solids: Develop models to simulate the transport and storage of dissolved solids in both surface-water and groundwater systems.

New Mexico;Texas↗
USGS2007

Surficial sediment character of the New York-New Jersey offshore continental shelf region: A GIS compilation

Broad continental shelf regions such as the New York Bight are the product of a complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression (>100 m sea-level rise) following the end of the last Pleistocene ice advance ~ 20,000 years ago. The area of the U.S. Exclusive Economic Zone (U.S. EEZ) territory, extending 200 nautical miles seaward from the coast, is larger than the continental U.S. and contains submerged landforms that provide a variety of natural functions and societal benefits, such as: critical habitats for fisheries, ship navigation and homeland security, and engineering activities (i.e. oil and gas platforms, pipeline and cable routes, potential wind-energy-generation sites). Some parts of the continental margins, particularly inner-continental shelf regions, also contain unconsolidated hard-mineral deposits such as sand and gravel that are regarded as potential aggregate resources to meet or augment needs not met by onshore deposits (Williams, 1992). The present distribution of surficial sediment off the northeastern United States is shaped from the deposits left by the last glaciation and reflects the cumulative effects of sediment erosion, transport, sorting, and deposition by storm and tidal processes during the Holocene rise in sea level. As a result, the sediments on the sea floor represent both an historical record of former conditions and a guide to possible future sedimentary environments. The U.S. Geological Survey (USGS) through the Coastal and Marine Geology Program, in cooperation with the University of Colorado and other partners, has compiled extant sediment character and textural data as well as other geologic information on the sea floor from all regions around the U.S. into the usSEABED data system (Reid and others, 2005; Buczkowski and others, 2006; Reid and others, 2006). The usSEABED system, which contains information on sediment grain size and lithology for more than 340,500 stations within the U.S. EEZ. has been developed and populated with data as part of the USGS Marine Aggregate Resources and Processes and the National Benthic Habitats projects in order to provide the base-line data needed to update the current maps of offshore surficial geologic character and sediment distribution. The maps are also used to characterize benthic sea floor environments important for marine ecosystems. U.S. Geological Survey, Data Series 118 (Reid and others, 2005), of the usSEABED data release series, represents the combined efforts of the USGS and several other government agencies to provide a unified resource for accessing and preserving records of U.S. east coast sea floor geologic information and sediment texture data. For this present report, we have chosen to focus on the New York-New Jersey region, an area that has been intensely studied by the USGS for many years to address many complex issues. This report illustrates the uses of the usSEABED database for GIS applications, while offering additional insight into the resources and data available from the USGS and its collaborative institutions. This report is based on data contained in U.S. Geological Survey Data Series 118 (Reid and others, 2005) and shows an assortment of example GIS products that are possible using usSEABED. All data are intended to be GIS-ready and should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System. This project employs the Environmental Systems Research Institute's (ESRI) ArcView™ software. Many of these maps were made as part of the ongoing USGS study to assess marine aggregate resources offshore New York and New Jersey, but these maps can serve many other purposes. The marine science community, educators, students and others are encouraged to use these data to generate GIS products for their own purposes. The objectives of the Marine Aggregate Resources and Processes project are to produce a series of new geologic maps and reports of the sea floor that will provide scientific insights into the character and geologic development of U.S. continental margins and to use these maps and information to assess the potential availability of offshore sand and gravel resources. The mapping and aggregate resource assessments are being conducted on a national scale using the usSEABED data base as described in Williams and others (2003). Potential uses for these data include: (1) defining the geological variability of the sea floor in relation to benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and benthic habitats; (3) locating aggregate resources for beach nourishment and industrial applications; and (4) providing a detailed geospatial framework for future marine science research, monitoring, and management activities. The initial assessments are in progress for the New York Bight and Louisiana offshore areas.

New Jersey, New York↗
USGS2019

Evaluation of chemical and hydrologic processes in the eastern Snake River Plain Aquifer based on results from geochemical modeling, Idaho National Laboratory, eastern Idaho

Nuclear research activities at the U.S. Department of Energy (DOE) Idaho National Laboratory (INL) produced liquid and solid chemical and radiochemical wastes that were disposed to the subsurface resulting in detectable concentrations of some waste constituents in the eastern Snake River Plain (ESRP) aquifer. These waste constituents may affect the water quality of the aquifer and may pose risks to the eventual users of the aquifer water. To understand these risks to water quality the U.S. Geological Survey, in cooperation with the DOE, conducted geochemical mass-balance modeling of the ESRP aquifer to improve the understanding of chemical reactions, sources of recharge, mixing of water, and groundwater flow directions in the shallow (upper 250 feet) aquifer at the INL. Modeling was conducted using the water chemistry of 127 water samples collected from sites at and near the INL. Water samples were collected between 1952 and 2017 with most of the samples collected during the mid-1990s. Geochemistry and isotopic data used in geochemical modeling consisted of dissolved oxygen, carbon dioxide, major ions, silica, aluminum, iron, and the stable isotope ratios of hydrogen, oxygen, and carbon. Geochemical modeling results indicated that the primary chemical reactions in the aquifer were precipitation of calcite and dissolution of plagioclase (An 60 ) and basalt volcanic glass. Secondary minerals other than calcite included calcium montmorillonite and goethite. Reverse cation exchange, consisting of sodium exchanging for calcium on clay minerals, occurred near site facilities where large amounts of sodium were released to the ESRP aquifer in wastewater discharge. Reverse cation exchange acted to retard the movement of wastewater-derived sodium in the aquifer. Regional groundwater inflow was the primary source of recharge to the aquifer underlying the Northeast and Southeast INL Areas. Birch Creek (BC), the Big Lost River (BLR), and groundwater from BC valley provided recharge to the North INL Area, and the BLR and groundwater from BC and Little Lost River (LLR) valleys provided recharge to the Central INL Area. The BLR, groundwater from the BLR and LLR valleys and the Lost River Range, and precipitation provided recharge to the Northwest and Southwest INL Areas. The primary source of recharge west and southwest of the INL was groundwater inflow from BLR valley. Upwelling geothermal water was a small source of recharge at two wells. Aquifer recharge from surface water in the northern, central, and western parts of the INL indicated that the aquifer in these areas was a dynamic, open system, whereas the aquifer in the eastern part of the INL, which receives little recharge from surface water, was a relatively static and closed system. Sources of recharge identified from isotope ratios and geochemical modeling (major ion concentrations) were nearly identical for the North, Northeast, Southeast, and Central INL Areas, which indicated that both methods probably accurately identified the sources of recharge in these areas. Conversely, isotope ratios indicated that the BLR and groundwater from the LLR valley provided most recharge to the western parts of the Northwest and Southwest INL Areas, whereas geochemical modeling results indicated a smaller area of recharge from the BLR and groundwater from the LLR valley, a larger area of recharge from the Lost River Range, and recharge of groundwater from the BLR valley that extended to the west INL boundary. The results from geochemical modeling probably were more accurate because major ion concentrations, but not isotope ratios, were available to characterize groundwater from the BLR valley and the Lost River Range. Sources of recharge identified with a groundwater flow model (using particle tracking) and geochemical modeling were similar for the Northeast and Southeast INL Areas. However, differences between the models were that the geochemical model represented (1) recharge of groundwater from the Lost River Range in the western part of the INL, whereas the flow model did not, (2) recharge of groundwater from the BC and BLR valleys extending farther south and east, respectively, than the flow model, and (3) more recharge from the BLR in the Southwest INL Area than the flow model. Mixing of aquifer water beneath the INL included (1) mixing of regional groundwater and water from the BC valley in the Northeast and Southeast INL Areas and (2) mixing of surface water (primarily from the BLR) and groundwater across much of the North, Central, Northwest, and Southwest INL Areas. Localized recharge from precipitation mixed with groundwater in the Northwest and Southwest INL Areas, and localized upwelling geothermal water mixed with groundwater in the Central and Northeast INL Areas. Flow directions of regional groundwater were south in the eastern part of the INL and south-southwest at downgradient locations. Groundwater from the BC and LLR valleys initially flowed southeast before changing to south-southwest flow directions that paralleled regional groundwater, and groundwater from the BLR valley initially flowed south before changing to a southsouthwest direction. Wastewater-contaminated groundwater flowed south from the Idaho Nuclear Technology and Engineering Center (INTEC) infiltration ponds in a narrow plume, with the percentage of wastewater in groundwater decreasing due to dilution, dispersion, and (or) degradation from about 60‒80 percent wastewater 0.7‒0.8 mile (mi) south of the INTEC infiltration ponds to about 1.4 percent wastewater about 15.5 mi south of the INTEC infiltration ponds. Wastewater contaminated groundwater flowed southeast and then southwest from the Naval Reactors Facility industrial waste ditch, with the percentage of wastewater in groundwater decreasing from about 100 percent wastewater adjacent to the waste ditch to about 2 percent wastewater about 0.6 mi south of the waste ditch.

Idaho↗
USGS2014

Hydrosalinity studies of the Virgin River, Dixie Hot Springs, and Littlefield Springs, Utah, Arizona, and Nevada

The Virgin River contributes a substantial amount of dissolved solids (salt) to the Colorado River at Lake Mead in the lower Colorado River Basin. Degradation of Colorado River water by the addition of dissolved solids from the Virgin River affects the suitability of the water for municipal, industrial, and agricultural use within the basin. Dixie Hot Springs in Utah are a major localized source of dissolved solids discharging to the Virgin River. The average measured discharge from Dixie Hot Springs during 2009–10 was 11.0 cubic feet per second (ft 3 /s), and the average dissolved-solids concentration was 9,220 milligrams per liter (mg/L). The average dissolved-solids load—a measurement that describes the mass of salt that is transported per unit of time—from Dixie Hot Springs during this period was 96,200 tons per year (ton/yr). Annual dissolved-solids loads were estimated at 13 monitoring sites in the Virgin River Basin from streamflow data and discrete measurements of dissolved-solids concentrations and (or) specific conductance. Eight of the sites had the data needed to estimate annual dissolved-solids loads for water years (WYs) 1999 through 2010. During 1999–2010, the smallest dissolved-solids loads in the Virgin River were upstream of Dixie Hot Springs (59,900 ton/yr, on average) and the largest loads were downstream of Littlefield Springs (298,200 ton/yr, on average). Annual dissolved-solids loads were smallest during 2002–03, which was a period of below normal precipitation. Annual dissolved-solids loads were largest during 2005—a year that included a winter rain storm that resulted in flooding throughout much of the Virgin River Basin. An average seepage loss of 26.7 ft 3 /s was calculated from analysis of monthly average streamflow from July 1998 to September 2010 in the Virgin River for the reach that extends from just upstream of the Utah/Arizona State line to just above the Virgin River Gorge Narrows. Seepage losses from three river reaches in the Virgin River Gorge containing known fault zones accounted for about 48 percent of this total seepage loss. An additional seepage loss of 6.7 ft 3 /s was calculated for the reach of the Virgin River between Bloomington, Utah, and the Utah/Arizona State line. This loss in flow is small compared to total flow in the river and is comparable to the rated error in streamflow measurements in this reach; consequently, it should be used with caution. Littlefield Springs were studied to determine the fraction of its discharge that originates as upstream seepage from the Virgin River and residence time of this water in the subsurface. Geochemical and environmental tracer data from groundwater and surface-water sites in the Virgin River Gorge area suggest that discharge from Littlefield Springs is a mixture of modern (post-1950s) seepage from the Virgin River upstream of the springs and older groundwater from a regional carbonate aquifer. Concentrations of the chlorofluorocarbons (CFCs) CFC-12 and CFC-113, chloride/fluoride and chloride/bromide ratios, and the stable isotope deuterium indicate that water discharging from Littlefield Springs is about 60 percent seepage from the Virgin River and about 40 percent discharge from the regional carbonate aquifer. The river seepage component was determined to have an average subsurface traveltime of about 26 ±1.6 years before discharging at Littlefield Springs. Radiocarbon data for Littlefield Springs suggest groundwater ages from 1,000 to 9,000 years. Because these are mixed waters, the component of discharge from the carbonate aquifer is likely much older than the groundwater ages suggested by the Littlefield Springs samples. If the dissolved-solids load from Dixie Hot Springs to the Virgin River were reduced, the irrigation water subsequently applied to agricultural fields in the St. George and Washington areas, which originates as water from the Virgin River downstream of Dixie Hot Springs, would have a lower dissolved-solids concentration. Dissolved-solids concentrations in excess irrigation water draining from the agricultural fields are about 1,700 mg/L higher than the concentrations in the Virgin River water that is currently (2014) used for irrigation that contains inflow from Dixie Hot Springs; this increase results from evaporative concentration and dissolution of mineral salts in the irrigated agricultural fields. The water samples collected from drains downgradient from the irrigated areas are assumed to include the dissolution of all available minerals precipitated in the soil during the previous irrigation season. Based on this assumption, a change to more dilute irrigation water will not dissolve additional minerals and increase the dissolved-solids load in the drain discharge. Following the hypothetical reduction of salts from Dixie Hot Springs, which would result in more dilute Virgin River irrigation water than is currently used, the dissolution of minerals left in the soil from the previous irrigation season would result in a net increase in dissolved-solids concentrations in the drain discharge, but this increase should only last one irrigation season. After one (or several) seasons of irrigating with more dilute irrigation water, mineral precipitation and subsequent re-dissolution beneath the agricultural fields should be greatly reduced, leading to a reduction in dissolved-solids load to the Virgin River below the agricultural drains. A mass-balance model was used to predict changes in the dissolved-solids load in the Virgin River if the salt discharging from Dixie Hot Springs were reduced or removed. Assuming that 33.4 or 26.7 ft 3 /s of water seeps from the Virgin River to the groundwater system upstream of the Virgin River Gorge Narrows, the immediate hypothetical reduction in dissolved-solids load in the Virgin River at Littlefield, Arizona is estimated to be 67,700 or 71,500 ton/yr, respectively. The decrease in dissolved-solids load in seepage from the Virgin River to the groundwater system is expected to reduce the load discharging from Littlefield Springs in approximately 26 years, the estimated time lag between seepage from the river and discharge of the seepage water, after subsurface transport, from Littlefield Springs. At that time, the entire reduction in dissolved solids seeping from the Virgin River is expected to be realized as a reduction in dissolved solids discharging from Littlefield Springs, resulting in an additional reduction of 24,700 ton/yr (based on 33.4 ft 3 /s of seepage loss) or 21,000 ton/yr (based on 26.7 ft 3 /s of seepage loss) in the river’s dissolved-solids load at Littlefield.

Arizona, Nevada, Utah↗
USGS1992

Summary of ground-water hydrology of the Cambrian-Ordovician aquifer system in the northern Midwest, United States

The Cambrian-Ordovician aquifer system contains very productive aquifers throughout an area of about 161,000 square miles in the northern Midwest. The aquifer system is used extensively for industrial and rural water supplies and is the primary source of water for many municipalities in most of its area of occurrence, except in Indiana, central and southern Illinois, and western Iowa, where the aquifer system contains saline water. About 680 million gallons per day was withdrawn from drilled wells in the aquifer system in 1980. Rocks of Cambrian and Ordovician age, mainly marine sandstones and carbonate rocks, constitute most of the bedrock and subcrop beneath glacial drift in southeastern Minnesota, northeastern Iowa, Wisconsin, northern Illinois, and extreme northwestern Indiana. These strata dip generally to the south and east off the Transcontinental arch in Minnesota and the Wisconsin arch, which are structurally high areas of the Precambrian basement, into the structural lows of the Forest City basin of southwestern Iowa, the Illinois basin, and the Michigan basin. The Cambrian and Ordovician rocks are buried by younger rocks in the remainder of Iowa, Illinois, and Indiana and in most of northern Missouri. Silurian and Devonian carbonate rocks immediately overlie the Cambrian and Ordovician rocks in those areas and are termed the "Silurian-Devonian aquifer" in this study. The balance of the Devonian rocks and the overlying Mississippian and Pennsylvanian rocks generally are fine-grained sediment or dense carbonate rocks and collectively are considered to be a regional confining unit. Most of the area is covered by a veneer of glacial drift, which, along with Cretaceous sandstone in northwestern Iowa, is treated as a regional water-table aquifer. The Cambrian-Ordovician aquifer system is composed of six hydrogeologic units, which are, in descending order, the Maquoketa confining unit, St. Peter-Prairie du Chien-Jordan aquifer, St. Lawrence- Franconia confining unit, Ironton-Galesville aquifer, Eau Claire confining unit, and Mount Simon aquifer. The uppermost confining unit is the least permeable; it consists primarily of the Maquoketa Shale but includes the dense carbonate rocks of the Galena Dolomite and the Decorah, Platteville, and Glenwood Formations where they are overlain by the Maquoketa Shale. The presence of the Maquoketa in Iowa, eastern Wisconsin, northeastern Illinois, and Indiana effectively confines the entire aquifer system below. The aquifer system is a leaky-artesian system in which movement of ground water is controlled partly by the internal confining units. In the northern outcrop area, unconfined conditions prevail in shallow parts of the aquifer system and where the system is thin. Much of the recharge in upland areas discharges to streams through local flow systems, which are no more than a few miles in length. The remainder of the recharge moves slowly downward to deeper formations and downgradient to form or join the regional flow system. Computer simulations of regional ground-water flow improve understanding of the regional character of the Cambrian-Ordovician aquifer system. Ground-water flow in the confined part of the aquifer system is mainly horizontal, away from the structural highs in the north, toward the structural basins in the south and east. The rate of ground-water movement is very slow, and the flux along flow paths into the basins decreases because of a progressive loss of head and small but widespread upward leakage. Saline water in the basins restricts movement of freshwater into the deeper parts of the basins, thereby forcing flow upward through confining units. Principal regional discharge areas are the Mississippi and Missouri Rivers, the Illinois and Michigan structural basins, and Lake Michigan. However, the lake is not in direct hydraulic connection with the Cambrian-Ordovician aquifer system and receives flow primarily from the Silurian-Devonian aquifer, which it directly overlies. The longest regional flow paths originate in recharge areas in northwestern Iowa and extend southeastward as much as 400 miles toward the Illinois basin. Simulated predevelopment recharge and discharge for the Cambrian- Ordovician aquifer system balance at 351 million gallons per day. Development of the aquifer system began in various parts of the northern Midwest in the 1860's and 1870's with the drilling of deep, generally flowing artesian wells near Lake Michigan in eastern Wisconsin and northeastern Illinois and along the valleys of the Mississippi River and its tributaries. Initial heads of 186 and 130 feet above Lake Michigan at Milwaukee and Chicago, respectively, have been reported. Large-scale pumping has produced cones of depression in these two areas, with respective head declines of as much as 375 and 900 feet. Other major pumping centers generally have had much smaller declines. The largest withdrawals from the aquifer system were about 180 million gallons per day in each of the major metropolitan areas of Chicago and Minneapolis-St. Paul (Twin Cities). However, the total decline in head in the St. Peter-Prairie du Chien-Jordan aquifer in the Twin Cities by 1980 was only 90 feet because the aquifer is unconfined. Most of the eastern two-thirds of Iowa, where the aquifer system is tightly confined, is characterized by more than 50 feet of head decline, with 200 feet or more at Mason City and the Quad Cities. Pumpage from the Cambrian-Ordovician aquifer system throughout the study area averaged 683 million gallons per day for the period 1976-80. Results of a transient-model simulation show that recharge increased over predevelopment recharge by 447 million gallons per day. Natural discharge decreased by 99 million gallons per day, and 137 million gallons per day was released from aquifer storage. Mineralization of ground water in the aquifer system increases from slightly mineralized calcium magnesium bicarbonate water in the northern recharge areas, through more mineralized, mixed water types with increased sodium and sulfate, to highly mineralized sodium chloride brines in the deeper parts of the structural basins.

Iowa, Illinois, Indiana, Michigan, Minnesota, Miss↗
USGS2020

Groundwater quality and geochemistry of West Virginia’s southern coal fields

Coal mining has been the dominant industry and land use in West Virginia’s southern coal fields since the mid-1800s. Mortality rates for a variety of serious chronic conditions, such as diabetes, heart disease, and some forms of cancer in Appalachian coal mining regions, are higher than in areas lacking substantial coal mining activity within the Appalachian Region or elsewhere in the United States. Causes of the increased mortality and morbidity are not clear, but poor diet, high rates of smoking, socioeconomic factors, and the quality of groundwater used by area residents are all possible contributing factors. This study was conducted by the U.S. Geological Survey in cooperation with the West Virginia Department of Health and Human Resources and the West Virginia Department of Environmental Protection, with grant support from the Centers for Disease Control and Prevention (CDC) to assess the quality of groundwater in southern West Virginia. The data from this assessment of groundwater quality may be used by the CDC and other agencies to potentially investigate the role or lack thereof of groundwater quality with respect to mortality and morbidity rates in the region. The study was conducted in a region where a high density of current or past coal mining combined with a lack of advanced sewage treatment could affect concentrations of commonly occurring constituents plus contaminants, including nitrate, trace metals, major ions, indicator bacteria, radon, hydrogen sulfide, and dissolved hydrocarbons. Because rural residential wells and mine outfalls are considered private sources of water in the region, and are therefore unregulated and unmonitored, water-quality data are sparse. To fill the data gap and assess the groundwater quality in the region, water-quality samples were collected from 60 sites in a 10-county area. The 60 sites sampled included 46 rural residential homeowner wells and 14 mine outfall discharges used for residential supply. For this study, all samples were collected prior to any filtration or other treatments, typically at the pressure tank, and are indicative of total and dissolved constituents in the untreated water. Generally, data for the 60 sites indicate that most waters sampled do not exceed thresholds for most U.S. Environmental Protection Agency (EPA) drinking-water standards and U.S. Geological Survey (USGS) drinking-water screening criteria. However, there were several notable exceptions. Turbidity exceeded the 5-Nephelometric Turbidity Unit (NTU) EPA treatment technique (TT) drinking-water standard in 14 of 60 (23 percent) sites sampled and exceeded the 1-NTU TT standard in 51 of 60 (85 percent) sites sampled. Turbidity is common in many wells in southern West Virginia and may be attributed to iron oxyhydroxide precipitates, sediment carried into the aquifers from the shallow soil zone due to improperly constructed or cased wells or transported to the aquifer in shallow stress-relief fracture zones or through permeable bedding-plane partings. For the sites sampled, 31 of 60 (52 percent) had pH values at, above, or below the upper and lower range of the EPA Secondary Maximum Contaminant Level (SMCL, 6.5–8.5 standard units). Of those 31 sites, 28 (90 percent) were indicative of acidic corrosive water and 3 (10 percent) were indicative of alkaline water. The Langelier Saturation Index (LSI), which is a measure of the corrosivity of the water, was computed for all sites sampled for the study. Eighty-two percent of the sites sampled had waters that were classified as corrosive, based on a LSI less than −0.5. Corrosive water has the potential to leach lead, copper, and other metals from lead, copper, galvanized, or lead-tin soldered connections in water lines. The chloride to sulfate mass ratio also was assessed with the alkalinity to indicate the potential to promote galvanic corrosion (PPGC) of water lines and plumbing fixtures. Only one of the sites (1.7 percent) classified as a corrosive water site, had a PPGC considered high; the remaining sites were classified as having either a moderate (53.3 percent) or low (45 percent) PPGC. Therefore, the type of plumbing systems sampled for this study may be affected by corrosive water, but the potential for leaching trace metals and other constituents from residential plumbing systems containing older galvanized pipes or lead-tin soldered copper pipes is moderate to low. The indicator bacteria total coliform and Escherichia coli ( E. coli ) also were detected in groundwater samples to varying degrees. Total coliforms, which are a broad class of indicator bacteria, are common in groundwater in southern West Virginia and were detected in 39 of the 60 sites (65 percent) sampled. The presence of total coliform bacteria is a potential indicator of surface contamination, due to improperly constructed or cased wells, or infiltration of soil or other surface contaminants into the aquifer or well bore. E. coli bacteria, however, are much more indicative of fecal contamination of groundwater from either human or animal sources, and 14 of the 60 (23 percent) sites sampled had detections of E. coli . Although only a few strains of E. coli are known pathogens, their presence in groundwater may be an indicator of other related pathogens such as viruses and should be regarded as a serious potential issue. Water treatment such as chlorination, ozonation, or ultraviolet light may be appropriate to kill potential pathogenic bacteria or viruses in the source water. Manganese and iron were prevalent contaminants in the groundwater samples collected for this study, with 30 of 60 (50 percent) sites analyzed for manganese and 25 of 60 (42 percent) sites analyzed for iron exceeding the proposed 50- and 300-micrograms per liter (µg/L) SMCL drinking-water standards, respectively, for aesthetic criteria such as taste, odor, or staining of plumbing fixtures. Fourteen of the 60 sites sampled (23 percent) had concentrations of manganese that exceeded the 300-µg/L USGS health-based screening level, and 1 site exceeded the 1,600-µg/L EPA drinking-water equivalent level, which is based on a lifetime exposure level. Sodium is another common constituent in groundwater within the study area. Sodium has an EPA health-based value (HBV) of 20 milligrams per liter (mg/L) for individuals who are on a sodium-restricted diet for blood pressure or other health reasons. Sodium concentrations exceeded the 20-mg/L EPA HBV in 27 of 60 (45 percent) samples. Radon, a naturally occurring carcinogenic radioactive gas known to cause lung cancer, was detected at concentrations at or exceeding the proposed 300-picocuries per liter (pCi/L) EPA Maximum Contaminant Level (MCL) in 12 of the 60 (20 percent) sites sampled. Sites with radon gas concentrations exceeding the 300-pCi/L proposed MCL have the potential for airborne concentrations of radon to exceed the 4-pCi/L indoor air standard. Inhalation of radon can cause lung cancer, and the 4-pCi/L indoor air standard is based on an inhalation standard. Therefore, homeowners whose wells have radon gas concentrations exceeding 300 pCi/L may be advised to have their indoor air tested to determine if indoor air concentrations exceed the 4-pCi/L indoor air standard established by the EPA. Various factors were analyzed statistically and graphically to determine whether they have an influence on groundwater quality within the study area, including topographic setting, well depth, type of mining (surface or underground), type of site (well or mine outfall), and geologic formation. Only geologic formation and the type of site sampled had strong statistical correlations with one or more of the constituents of concern for this study. The overall chemistry of outfalls (mine outfalls) and wells was significantly different, with a much higher dissolved oxygen content in outfalls than in wells. The dissolved oxygen content is the primary component driving the oxidation and reduction of minerals, and the precipitation of minerals that are saturated or super saturated with respect to various cations and anions. Median dissolved oxygen concentrations for the outfalls sampled was 8.75 mg/L, and only 0.4 mg/L for the wells sampled. Median concentrations of sulfate and selenium were much higher in waters from the outfalls sampled, with median concentrations of 73.75 mg/L and 2.35 µg/L, respectively, compared to the wells sampled, which had median concentrations of 18.3 mg/L and less than (<) the 0.05-µg/L method detection limit, respectively. The maximum selenium concentration was for a well, with a concentration of 16.6 µg/L. The geochemical processes that control sulfate and selenium concentrations in groundwater are similar and are the result of the oxidation of sulfide minerals such as pyrite and ferroselite. Iron and manganese concentrations were elevated in most of the wells sampled, with median concentrations of 269.5 and 124.5 µg/L, respectively, but were rarely detected in the outfalls sampled, with median concentrations of < 4.0 and < 0.4 µg/L, respectively. The difference in iron and manganese between wells and outfalls is indicative of the role of dissolved oxygen on processes controlling groundwater chemistry in the region. Three principal geologic formations were assessed for the study, and the overall chemistry for the Pocahontas, New River, and Kanawha Formations varied substantially with respect to several constituents. Concentrations of calcium, magnesium, and total dissolved solids were highest for sites sampled in the Pocahontas Formation, with median concentrations of 41.9, 18.6, and 312 mg/L, respectively. For constituents that are commonly associated with mining activity, the highest concentrations were for sites sampled in the New River Formation, with median concentrations of iron and manganese of 2,450 µg/L and 482 µg/L, respectively, and a median pH of 6.35 standard units. Concentrations of barium also were elevated in samples collected from sites in the New River Formation, with a median barium concentration of 184 µg/L. The source of the barium is not fully known but may be associated with commingling of shallow groundwater with deeper brines or dissolution of the mineral barite. The highest median sulfate concentrations were from sites sampled in the Pocahontas Formation, with a median concentration of 64.0 mg/L. Of the 12 sites at or exceeding the 300-pCi/L proposed drinking-water standard for radon, 8 (67 percent of MCL exceedances) were for sites deriving water from the Kanawha Formation, 3 (25 percent of MCL exceedances) were for sites deriving water from the New River Formation, and only 1 site was for water from the Pocahontas Formation (8 percent of proposed MCL exceedances). Dissolved hydrocarbons, including methane, ethane, propane, propene, n - and i -butane, 1-butene, n - and i -pentane, pentane, 2- and 3-ethyl pentane, hexane, and benzene were analyzed in samples collected from 59 of the 60 sites to assess the potential occurrence and sources of these trace gases in groundwater within the study area. Results of the analysis indicate that most of the gas is of shallow biogenic origin, possibly associated with coal-bed methane, but a subset of samples has a gas signature and a chloride to bromide ratio indicative of potential mixing with deeper thermogenic gases. Only 2 of the 59 (3.3 percent) sites sampled had concentrations of methane gas, which is a highly combustible and explosive gas, exceeding the 10 milligrams per kilogram level of concern established by the U.S. Office of Surface Mining Reclamation and Enforcement. Principal components analysis was used to assess the primary geochemical processes occurring in the aquifers sampled. The first principal component had significant positive loadings for bromide, chloride, silica, ammonia, barium, iron, manganese, and arsenic, and significant negative loadings for dissolved oxygen, potassium, nitrate, and uranium, and reflects reduction and oxidation (redox) processes occurring in deeper anoxic groundwater or shallow oxic groundwater. The strong positive loadings for iron, manganese, barium, and arsenic are correlated with reducing conditions often found deeper in the aquifer. More oxic water is correlated with oxidation of nitrogen species to nitrate and environmental mobilization of uranium and sulfate in shallow wells and mine outfalls.

West Virginia↗