Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research- Solid Earth”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36Linked to original sources
USGS2012

Variations in magma supply rate at Kilauea Volcano, Hawaii

When an eruption of Kilauea lasts more than 4 months, so that a well-defined conduit has time to develop, magma moves freely through the volcano from a deep source to the eruptive site at a constant rate of 0.09 km 3 /yr. At other times, the magma supply rate to Kilauea, estimated from geodetic measurements of surface displacements, may be different. For example, after a large withdrawal of magma from the summit reservoir, such as during a rift zone eruption, the magma supply rate is high initially but then lessens and exponentially decays as the reservoir refills. Different episodes of refilling may have different average rates of magma supply. During four year-long episodes in the 1960s, the annual rate of refilling varied from 0.02 to 0.18 km 3 /yr, bracketing the sustained eruptive rate of 0.09 km 3 /yr. For decade-long or longer periods, our estimate of magma supply rate is based on long-term changes in eruptive rate. We use eruptive rate because after a few dozen eruptions the volume of magma that passes through the summit reservoir is much larger than the net change of volume of magma stored within Kilauea. The low eruptive rate of 0.009 km 3 /yr between 1840 and 1950, compared to an average eruptive rate of 0.05 km 3 /yr since 1950, suggests that the magma supply rate was lower between 1840 and 1950 than it has been since 1950. An obvious difference in activity before and since 1950 was the frequency of rift zone eruptions: eight rift zone eruptions occurred between 1840 and 1950, but more than 20 rift zone eruptions have occurred since 1950. The frequency of rift zone eruptions influences magma supply rate by suddenly lowering pressure of the summit magma reservoir, which feeds magma to rift zone eruptions. A temporary drop of reservoir pressure means a larger-than-normal pressure difference between the reservoir and a deeper source, so magma is forced to move upward into Kilauea at a faster rate.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Fluid expulsion sites on the Cascadia accretionary prism: mapping diagenetic deposits with processed GLORIA imagery

Point-discharge fluid expulsion on accretionary prisms is commonly indicated by diagenetic deposition of calcium carbonate cements and gas hydrates in near-surface (<10 m below seafloor; mbsf) hemipelagic sediment. The contrasting clastic and diagenetic lithologies should be apparent in side scan images. However, sonar also responds to variations in bottom slope, so unprocessed images mix topographic and lithologic information. We have processed GLORIA imagery from the Oregon continental margin to remove topographic effects. A synthetic side scan image was created initially from Sea Beam bathymetric data and then was subtracted iteratively from the original GLORIA data until topographic features disappeared. The residual image contains high-amplitude backscattering that we attribute to diagenetic deposits associated with fluid discharge, based on submersible mapping, Ocean Drilling Program drilling, and collected samples. Diagenetic deposits are concentrated (1) near an out-of-sequence thrust fault on the second ridge landward of the base of the continental slope, (2) along zones characterized by deep-seated strikeslip faults that cut transversely across the margin, and (3) in undeformed Cascadia Basin deposits which overlie incipient thrust faults seaward of the toe of the prism. There is no evidence of diagenetic deposition associated with the frontal thrust that rises from the dècollement. If the dècollement is an important aquifer, apparently the fluids are passed either to the strike-slip faults which intersect the dècollement or to the incipient faults in Cascadia Basin for expulsion. Diagenetic deposits seaward of the prism toe probably consist dominantly of gas hydrates.

Cascadia Basin↗
USGS2012

Evolution of the Precambrian lithosphere: Seismological and geochemical constraints

Several recent models of crustal evolution are based on the belief that the thickness of the continental crust is proportional to its age, with ancient crust being the thickest. A worldwide review of seismic structure contradicts this belief and falsifies these models, at least for the Archean. Proterozoic crust has a thickness of 40–55 km and a substantial high‐velocity (>7 km/s) layer at its base, while Archean crust is only 27–40 km thick (except at the site of younger rifts and collisional boundaries) and lacks the basal high‐velocity layer. Seismology also provides evidence that the lithosphere is thickest beneath Archean cratons, while diamond ages show that this lithospheric keel must have already existed in the Archean. Geochemical data also indicate significant differences between Archean and Proterozoic lithosphere. Major and trace element studies of sediments show a change in upper crustal composition between the Archean and Proterozoic. Archean rocks are depleted in Si and K and enriched in Na, Ca, and Mg. There is also a marked change in the Eu/Eu * ratio. Mantle xenoliths and continental flood basalts show that the mantle lithosphere beneath Archean crust is ultradepleted in FeO compared to that beneath post‐Archean crust. The secular change in the crust‐forming process is attributed to a decline in mantle temperature, leading to a change in the composition of the lithospheric mantle. The higher temperature of the Archean mantle led to the eruption of komatiitic lavas, producing a refractory lithospheric mantle which is ultradepleted in FeO and volatiles. The resultant lithospheric keel is intrinsically less dense than the surrounding mantle and thus not susceptible to delamination. It was sufficiently thick and cool for diamonds to form during the Archean. In contrast, Proterozoic crust developed above fertile mantle. The eruption of continental flood basalts and underplating of basaltic sills is attributed to subsequent heating and partial melting of the lithospheric mantle. Consequently, Proterozoic crust is thickened and has a high‐velocity basal layer.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Seismic guided waves trapped in the fault zone of the Landers, California, earthquake of 1992

A mobile seismic array of seven stations was deployed at 11 sites along the fault trace of the M 7.4 Landers earthquake of June 28, 1992, with a maximum offset of 1 km from the trace. We found a distinct wave train with a relatively long period following the S waves that shows up only when both the stations and the events are close to the fault trace. This wave train is interpreted as a seismic guided wave trapped in a low‐velocity fault zone. To study the distribution of amplitude of the guided waves with distance from the fault trace and also their attenuation with travel distance along the fault zone, we eliminated source and recording site effects by the coda normalization method. The normalized amplitudes of guided waves show a spectral peak at 3–4 Hz, which decays sharply with distance from the fault trace. Spectral amplitudes at high frequencies (8–15 Hz) show an opposite trend, increasing with distance from the fault trace. The normalized amplitudes of guided waves at 3–4 Hz also show a systematic decrease with hypocentral distance along the fault zone, from which we infer an apparent Q of 50. In order to confirm the existence of the guided waves, a dense array of 31 stations was deployed at one of the 11 sites. The resultant records revealed unequivocal evidence for the existence of guided waves associated with the fault zone. By modeling the waveforms as S waves trapped in a low‐velocity waveguide sandwiched between two homogeneous half‐spaces with velocity V s = 3.0 km/s, we infer a waveguide width of about 180 m, a shear velocity of 2.0–2.2 km/s, and a Q of ∼50. Hypocenters of aftershocks with clear guided waves show a systematic distribution both laterally and with depth delineating the extent of the low‐velocity fault zone in three dimensions. We find that the zone extends to a depth of at least 10 km. This zone apparently continues to the south across the Pinto Mountain fault because guided waves are observed at stations north of the Pinto Mountain fault for earthquakes with epicenters south of it. On the other hand, the zone appears to be discontinuous at the fault bend located about 20 km north of the mainshock epicenter; guided waves were observed for stations and epicenters which are located on the same sides of the fault bend but not for those on the opposite sides.

California↗
USGS2012

Postseismic deformation following the 1989 (M = 7.1): Loma Prieta, California, earthquake

Postseismic deformation along a 90‐km profile bisecting the projected surface trace of the coseismic rupture of the 1989 Loma Prieta earthquake has been monitored by frequent GPS surveys for 3.3 years following the earthquake. In addition to the expected deformation associated with secular strain accumulation on the San Andreas and Calaveras faults, deformation associated with postseismic readjustment has been detected. Most of that deformation can be attributed to 1.5 m right‐lateral and 0.9 m reverse postseismic slip on a 5‐km‐wide downdip extension of the Loma Prieta rupture. In addition, there seems to be a 0.1 m postseismic collapse of the Loma Prieta rupture zone in the direction perpendicular to the plane of the rupture. The fault‐normal (N48°E) surface displacements plotted as a function of time exhibit a curvature suggesting a relaxation time of about 1.4 years. Similar plots of the fault‐parallel (N42°W) displacement components do not exhibit significant curvature. Presumably, the deformation shown in those plots is dominated by secular strain accumulation along the San Andreas and Calaveras faults rather than postseismic relaxation.

California↗
USGS2012

The seismic velocity structure of the Newfoundland Appalachian orogen

The deep structure of the Newfoundland Appalachian orogen is investigated by analyses of three intersecting seismic refraction/wide-angle reflection profiles which traverse the Gander and Dunnage zones or central mobile belt of Newfoundland. A simultaneous travel time inversion for velocity and interface was applied to the in-line seismic refraction/wide-angle reflection data and constrained by synthetic amplitude models. The results of the modeling procedure show a subhorizontally layered crust with upper crustal velocities ranging from 5.4 to 6.2 km/s, a midcrustal velocity of 6.25–6.35 km/s, and a lower crustal velocity of 6.7±0.2 km/s. The top of the lower crust is marked by a series of prominent reflections between 18 and 23 km depth which suggest a complex layered velocity interface. Strong laterally coherent Moho reflections indicate a sharp crust-mantle transition at 35 ± 3 km. The uppermost mantle has a velocity of 8.0±0.2 km/s, and a reflecting horizon at 55 km depth suggests an increase to velocities approaching 8.5 km/s. Normal moveout corrections applied to fan profiles provide constraining evidence for the reflecting horizon at the top of the lower crust and laterally continuous Moho reflections at 11–12 s two-way travel time. Comparisons with a coincident deep seismic reflection profile show that the refraction and reflection Mohos match to better than 2–3 km. Bulk Poisson's ratios of 0.23–0.24 for the whole crust calculated from P m P / S m S travel times suggest a crust dominated by quartzofeldspathic lithologies and a notable absence of voluminous mafic additions to the lower crust. The absence of a deep crustal root, coupled with the bulk intermediate composition inferred for the lower crust from the seismic refraction/wide-angle data, implies that the crust beneath central Newfoundland has undergone multiple periods of reactivation and equilibration following successive orogenic episodes.

Newfoundland and Labrador↗
USGS2008

Aeromagnetic evidence for a buried Early Cretaceous magmatic arc, northeast Japan

Positive aeromagnetic anomalies, recent drilling, and models constructed from these data delineate the plutonic roots of the Early Cretaceous Kitakami magmatic arc in northeast Japan. Buried plutons, mostly offshore, produce belts of positive magnetic anomalies. These anomalies and magnetotelluric data suggest that the plutons form a batholith 70–120 km wide, nearly 800 km long, and 10–15 km thick. The batholith may mark the location of the main Kitakami arc. Most of the exposed Kitakami plutons are 2–20 km in diameter; some are 3 km thick. The small plutons line up along NW trending faults; some may have been satellite vents that tapped into the magma supply of the main arc. The batholithic roots of the main arc now compose almost half of the modern Japan forearc basement. Steep magnetic gradients, offset anomalies, and basin stratigraphy portray extensive faulting of the Kitakami batholith during oblique subduction in the Late Cretaceous and rifting in the Miocene. The eastern boundary of the Kitakami batholith lies between 90 and 140 km west of the modern trench, much closer than the 300-km distance between the active arc and trench. The Early Cretaceous forearc basin and accretionary prism may underlie the modern forearc basin east of the batholith, but clear evidence is lacking. Much of the Early Cretaceous margin, including most of its forearc therefore is missing. How the material was removed is unknown: it could have been strike-slip faulted, eroded by subduction-related processes, or both.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Introduction to the special section northeast Japan: A case history of subduction

Subduction-related tectonic events such as strike-slip faulting, uplift of high-pressure metamorphic rocks in the forearc, back arc spreading, arc magmatism, and continental collisions have shaped northeast Japan, making it a case history for subduction. Much of the record of these events is preserved and can be used to reconstruct the tectonic history of the region. Although many geological, geophysical, and geochemical data have been collected in Japan for the last 30 years, interpretation of these data into a plate tectonic context did not really begin until about 10 years ago. Much of the data and interpretation on northeast Japan have been published in Japanese or as individual local studies. The primary goal of this special section is to present new investigations covering a wide range of topics and scales and place them in a tectonic framework. The papers in this special section focus on three main subjects: Mesozoic aspects of northeast Japan; the relation of Japan Sea opening with the tectonics and geochemistry of northeast Japan in the Tertiary; and the geophysical setting. The purpose of this overview is to link these subjects and provide a tectonic framework for north- east Japan and eastern Asia since the Mesozoic.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Strain accumulation along the Laguna Salada Fault, Baja California, Mexico

Strain accumulation observed over the 1978–1991 interval in a 30×100 km aperture trilateration network spanning the Laguna Salada fault is described by the principal strain rates 0.101±0.012 strain/yr N80°E±2° and −0.021±0.012 strain/yr N10°W±2°, extension reckoned positive. These strain accumulation rates have been corrected to remove coseismic effects of the nearby 1979 Imperial Valley ( = 6.5), 1980 Victoria (Baja California) ( = 6.4), 1987 Superstition Hills ( = 6.5), and 1987 Elmore Ranch ( = 5.9) earthquakes. The observed strain rates indicate extension at a rate of about 0.08 strain/yr perpendicular to the trend (N35°W) of the Salton trough as well as a right‐lateral tensor shear strain rate 0.05 strain/yr across it. The extension perpendicular to the trough is observed neither farther north near the Salton Sea nor farther south across the Gulf of California. However, Holocene slip on the Laguna Salada fault, about equal parts right‐lateral and normal slip, is consistent with the observed strain accumulation. A simple dislocation model intended to explain the observed strain accumulation as a product of slip at depth on the Laguna Salada fault would require that the fault be listric.

California↗
USGS2012

Three-dimensional modeling of pull-apart basins: implications for the tectonics of the Dead Sea Basin

We model the three-dimensional (3-D) crustal deformation in a deep pull-apart basin as a result of relative plate motion along a transform system and compare the results to the tectonics of the Dead Sea Basin. The brittle upper crust is modeled by a boundary element technique as an elastic block, broken by two en echelon semi-infinite vertical faults. The deformation is caused by a horizontal displacement that is imposed everywhere at the bottom of the block except in a stress-free &ldquo;shear zone&rdquo; in the vicinity of the fault zone. The bottom displacement represents the regional relative plate motion. Results show that the basin deformation depends critically on the width of the shear zone and on the amount of overlap between basin-bounding faults. As the width of the shear zone increases, the depth of the basin decreases, the rotation around a vertical axis near the fault tips decreases, and the basin shape (the distribution of subsidence normalized by the maximum subsidence) becomes broader. In contrast, two-dimensional plane stress modeling predicts a basin shape that is independent of the width of the shear zone. Our models also predict full-graben profiles within the overlapped region between bounding faults and half-graben shapes elsewhere. Increasing overlap also decreases uplift near the fault tips and rotation of blocks within the basin. We suggest that the observed structure of the Dead Sea Basin can be described by a 3-D model having a large overlap (more than 30 km) that probably increased as the basin evolved as a result of a stable shear motion that was distributed laterally over 20 to 40 km.

Dead Sea Basin↗
USGS2012

Interseismic uplift at the Nankai subduction zone, southwest Japan, 1951–1990

Uplift as a function of time from 1951 through 1990 has been deduced from annual mean sea level measured at 15 tide gages along the Nankai subduction zone, southwest Japan. The recurrence interval for rupture of the Nankai subduction zone is about 100 years, and the most recent rupture was in late 1946. Thus the 1951–1990 uplift record covers most of the first half of the earthquake cycle. The precision of the uplift record is better than could be obtained currently by annual Global Positioning System (GPS) measurements. The pre‐1960 uplift record shows rapid deformation that appears to terminate in 1959. After 1959 the uplift record is remarkably linear in time: Significant curvature in the uplift‐versus‐time plots is detected at only three of the 15 tide gages. The inferred uplift rates are not quantitatively consistent with the predictions of either the viscoelastic coupling or elastic half‐space models of subduction, but the agreement is sufficient to suggest that the causative physical mechanisms have been identified. The immediate postseismic response is controlled by the propagation of slip downward along the downdip extension of the coseismic rupture, and the interseismic response is caused by the accumulation of a slip deficit on the main thrust zone. Asthenosphere relaxation is not required to explain the observations.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Seismic velocity structure and composition of the continental crust: A global view

Seismic techniques provide the highest‐resolution measurements of the structure of the crust and have been conducted on a worldwide basis. We summarize the structure of the continental crust based on the results of seismic refraction profiles and infer crustal composition as a function of depth by comparing these results with high‐pressure laboratory measurements of seismic velocity for a wide range of rocks that are commonly found in the crust. The thickness and velocity structure of the crust are well correlated with tectonic province, with extended crust showing an average thickness of 30.5 km and orogens an average of 46.3 km. Shields and platforms have an average crustal thickness nearly equal to the global average. We have corrected for the nonuniform geographical distribution of seismic refraction profiles by estimating the global area of each major crustal type. The weighted average crustal thickness based on these values is 41.1 km. This value is 10% to 20% greater than previous estimates which underrepresented shields, platforms, and orogens. The average compressional wave velocity of the crust is 6.45 km/s, and the average velocity of the uppermost mantle ( Pn velocity) is 8.09 km/s. We summarize the velocity structure of the crust at 5‐km depth intervals, both in the form of histograms and as an average velocity‐depth curve, and compare these determinations with new measurements of compressional wave velocities and densities of over 3000 igneous and metamorphic rock cores made to confining pressures of 1 GPa. On the basis of petrographic studies and chemical analyses, the rocks have been classified into 29 groups. Average velocities, densities, and standard deviations are presented for each group at 5‐km depth intervals to crustal depths of 50 km along three different geotherms. This allows us to develop a model for the composition of the continental crust. Velocities in the upper continental crust are matched by velocities of a large number of lithologies, including many low‐grade metamorphic rocks and relatively silicic gneisses of amphibolite facies grade. In midcrustal regions, velocity gradients appear to originate from an increase in metamorphic grade, as well as a decrease in silica content. Tonalitic gneiss, granitic gneiss, and amphibolite are abundant midcrustal lithologies. Anisotropy due to preferred mineral orientation is likely to be significant in upper and midcrustal regions. The bulk of the lower continental crust is chemically equivalent to gabbro, with velocities in agreement with laboratory measurements of mafic granulite. Garnet becomes increasingly abundant with depth, and mafic garnet granulite is the dominant rock type immediately above the Mohorovicic discontinuity. Average compressional wave velocities of common crustal rock types show excellent correlations with density. The mean crustal density calculated from our model is 2830 kg/m 3 , and the average SiO 2 content is 61.8%.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Estimation of rod scale errors in geodetic leveling

Comparisons among repeated geodetic levelings have often been used for detecting and estimating residual rod scale errors in leveled heights. Individual rod-pair scale errors are estimated by a two-step procedure using a model based on either differences in heights, differences in section height differences, or differences in section tilts. It is shown that the estimated rod-pair scale errors derived from each model are identical only when the data are correctly weighted, and the mathematical correlations are accounted for in the model based on heights. Analyses based on simple regressions of changes in height versus height can easily lead to incorrect conclusions. We also show that the statistically estimated scale errors are not a simple function of height, height difference, or tilt. The models are valid only when terrain slope is constant over adjacent pairs of setups (i.e., smoothly varying terrain). In order to discriminate between rod scale errors and vertical displacements due to crustal motion, the individual rod-pairs should be used in more than one leveling, preferably in areas of contrasting tectonic activity. From an analysis of 37 separately calibrated rod-pairs used in 55 levelings in southern California, we found eight statistically significant coefficients that could be reasonably attributed to rod scale errors, only one of which was larger than the expected random error in the applied calibration-based scale correction. However, significant differences with other independent checks indicate that caution should be exercised before accepting these results as evidence of scale error. Further refinements of the technique are clearly needed if the results are to be routinely applied in practice.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Rapid extension recorded by cooling‐age patterns and brittle deformation, Naxos, Greece

The metamorphic core complex exposed as the island of Naxos in the Aegean Sea records an unusually complete sequence of structures developed as a result of continental extension. The structures formed during Miocene rise and cooling from ductile, upper amphibolite facies and anatectic conditions to brittle near‐surface conditions beneath the Naxos detachment fault. Top‐to‐the‐north ductile fabrics in the footwall, which initially developed during amphibolite facies prograde metamorphism, were overprinted by a succession of north directed, normal sense lower‐temperature brittle structures as the footwall was tectonically unloaded and unroofed. Pseudotachylite and cataclasite formation, brittle faulting, alteration, and erosion of the footwall occurred during continued slip and tectonic denudation. Neogene conglomerate and megabreccia, in part derived from exhumation of this footwall, lie structurally above the peripheral Naxos fault. Published K‐Ar and 40 Ar/ 39 Ar ages for hornblende, white mica, and biotite in the footwall decrease northwestward; apparent ages 17–50 Ma in the southeast correspond to areas of low metamorphic grade where preextension argon was partially retained. Published ages 16–10 Ma in higher‐grade rocks of the domal core in the north are cooling ages that for each of the three minerals show a component of younging in the NNE direction of extension. Assuming this is the direction of unroofing, we interpret the rate of this younging as the fault slip rate as the footwall rocks moved >20 km SSW relative to their hanging wall along the base of the Naxos detachment fault. The calculated rates of slip average 5–8 mm/yr, comparable to maximum rates reported in the Basin and Range province.

Naxos↗
USGS2012

Effects of geothermal development on deformation in the Long Valley Caldera, eastern California, 1985-1994

Long Valley caldera in east central California has been the site of crustal unrest in the form of seismicity and ground deformation in response to magmatic inflation since 1980. Uplift of the resurgent dome has totaled ∼0.6 m over the 1975–1992 period. Within this region of uplift, and near the southwestern edge of the resurgent dome, is the Casa Diablo area, which experienced relative subsidence of 0.17 m between 1985 and 1992. Geothermal fluid production began at Casa Diablo in 1985 to supply a binary electric power plant; currently, three such plants generate a total of about 40 MW of electricity. The plants are supplied by 170°C water pumped from depths near 150m; all the produced water is reinjected at cooler temperatures at depths near 600 m. Analyses of data from (1) regional leveling lines and a network of bench marks in the geothermal well field area, (2) tilt observations from an L‐shaped array of bench marks, and (3) calculations relating pressure and temperature changes to subsidence indicate that relative subsidence at Casa Diablo results mainly from reductions in pressure in the shallow production reservoir and overlying formations and reductions in temperature in the underlying injection reservoir. Secondary effects on deformation are caused by offsets along the Taylor‐Bryant fault bounding the west side of the well field.

California↗
USGS1996

Identifying coseismic subsidence in tidal-wetland stratigraphic sequences at the Cascadia subduction zone of western North America

Tidal-wetland stratigraphy reveals that great plate boundary earthquakes have caused hundreds of kilometers of coast to subside at the Cascadia subduction zone. However, determining earthquake recurrence intervals and mapping the coastal extent of past great earthquake ruptures in this region are complicated by the effects of many sedimentologic, hydrographic, and oceanographic processes that occur on the coasts of tectonically passive as well as active continental margins. Tidal-wetland stratigraphy at many Cascadia estuaries differs little from that at similar sites on passive-margin coasts where stratigraphic sequences form through nonseismic processes unrelated to coseismic land level changes. Methods developed through study of similar stratigraphic sequences in Europe provide a framework for investigating the Cascadia estuarine record. Five kinds of criteria must be evaluated when inferring regional coastal subsidence due to great plate boundary earthquakes: the suddenness and amount of submergence, the lateral extent of submerged tidal-wetland soils, the coincidence of submergence with tsunami deposits, and the degree of synchroneity of submergence events at widely spaced sites. Evaluation of such criteria at the Cascadia subduction zone indicates regional coastal subsidence during at least two great earthquakes. Evidence for a coseismic origin remains equivocal, however, for the many peat-mud contacts in Cascadia stratigraphic sequences that lack (1) contrasts in lithology or fossils indicative of more than half a meter of submergence, (2) well-studied tsunami deposits, or (3) precise ages needed for regional correlation. Paleoecologic studies of fossil assemblages are particularly important in estimating the size of sudden sea level changes recorded by abrupt peat-mud contacts and in helping to distinguish erosional and gradually formed contacts from coseismic contacts. Reconstruction of a history of great earthquakes for the Cascadia subduction zone will require rigorous application of the above criteria and many detailed investigations.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Strain accumulation across the central Nevada seismic zone, 1973–1994

Five trilateration networks extending for 280 km along the central Nevada seismic zone (1915 Pleasant Valley, M = 7.3; 1954 Dixie Valley, M = 6.8; 1954 Stillwater, M = 6.8; 1954 Rainbow Mountain, M = 6.6; 1954 Fairview Peak, M = 7.1; and 1932 Cedar Mountain, M = 7.2) have been surveyed 6 times since 1973 to determine deformation along the zone. Within the precision of measurement the deformation appears uniform along the zone and is described by the principal strain rates 0.036±0.008 μstrain/yr N60°W±3° and −0.031±0.008 μstrain/yr N30°E±3°, extension reckoned positive. The observed strain rates are consistent with simple, right‐lateral, tensor shear at the rate of 0.033 μstrain/yr across a shear zone striking N15°W. This central Nevada shear zone appears to be the northward continuation of the eastern California shear zone. The orientation of the strike‐slip and normal‐slip ruptures within the central Nevada seismic zone are consistent with principal stress axes parallel to the measured principal strain rate axes. Space‐based geodetic measurements (very long baseline interferometry) indicate that the relative motion accommodated across the Basin and Range province west of Ely, Nevada, is about 9.1±1.5 mm/yr N16°W±8° (Dixon et al., 1995.) Notice that the right‐lateral shear zone postulated to explain deformation in the central Nevada seismic zone is properly oriented to accommodate that relative motion. However, a 135‐km effective width of the shear zone would be required to accommodate all of the 9.1 mm/yr relative motion at the strain rates observed in the Nevada seismic zone; only about 3 mm/yr of that relative motion is accommodated within the span of the trilateration networks.

California, Nevada↗
USGS2012

Tholeiitic‐alkalic transition at subglacial volcanoes, Tuya region, British Columbia, Canada

Ash Mountain, South Tuya, and Tuya Butte are three small basaltic volcanoes in the Stikine volcanic belt of northern British Columbia. The volcanoes rise 700, 500, and 400 m above their bases and are about 3.2, 1.6, and 2.6 km 3 in volume, respectively. They began eruptive activity under several hundred meters of overlying glacial ice, or water in an ice‐impounded lake, and undegassed pillow lava was erupted and forms the bases of all three. Later, as the vents grew into shallow water, explosive phreatomagmatic activity erupted partly degassed glassy tuffs. Finally, when the volcano emerged through the surface of the ice or water (or the water was drained), degassed subaerial lava flows were erupted and were converted to assemblages of foreset‐bedded pillow breccia and pillow lava when subaerial flows crossed a shoreline and flowed into meltwater lakes. The undegassed subglacial pillow base of Ash Mountain is overlain by partly degassed pillows and hyaloclastite tuff cut by dikes; at South Tuya the pillow base is overlain by hyaloclastite tuffs and lenses of pillow lava; at Tuya Butte the pillow base is overlain by foreset‐bedded pillow lava, pillow breccias, and hyaloclastite tuffs, which in turn are overlain by subaerial lava flows composing a small shield volcano. The undegassed basal subglacial pillow lava of the three volcanoes contain 0.10 ± 0.01 wt % sulfur and ∼0.5 wt % H 2 O. The overlying partly degassed assemblages contain 0.06 ± 0.02% sulfur and ∼0.2% H 2 O at Ash Mountain, 0.07±0.01% sulfur at South Tuya, and 0.03±0.01% sulfur at Tuya Butte. The differences in the degree of degassing can be related to the nature of eruption and quenching and the distance of flow of the subaerial lava. When the volcanoes switched from subglacial to shallow water or subaerial eruptions, as shown by change to more explosive activity and then to subaerial lava flows (and by a marked reduction of sulfur in volcanic glass), the magma shifted from tholeiitic to alkalic composition. This transition occurs at each of the three volcanoes. The tholeiitic and alkalic magmas cannot be related by shallow crystal fractionation and apparently originated by differing degrees of deep melting at a mantle source. Prior to eruption the tholeiitic melts overlay alkalic melts in shallow chambers underlying each of the volcanoes because of their lower density and were, therefore, the first to erupt under subglacial conditions. As the volcano grew through the ice (or ice‐impounded water), the volcanic conduit vented to the atmosphere, producing a partial depressurization of the conduit and the subsurface chamber. This sudden reduction in confining pressure caused enhanced vesiculation of volatile saturated melts, particularly of the more volatile‐rich alkalic melts, causing them to rise to the top of the chamber and erupt.

British Columbia↗